ASTM-D6969 2008
$35.75
D6969-03(2008) Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
Published By | Publication Date | Number of Pages |
ASTM | 2008 | 3 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This practice covers the preparation procedures necessary for the reduction and division of calcined petroleum coke samples in order to generate appropriate analytical samples upon which physical and chemical analytical tests will be performed.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | Scope Referenced Documents Terminology |
2 | Significance and Use Organization of Sample Preparation FIG. 1 |
3 | Keywords TABLE 1 |
Standard Title | D6969-03(2008) Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis |
---|---|
Published Code | ASTM |
Publication Date | 2008 |
Pages Count | 3 |
ICS Codes | 75.160.10 - Solid fuels |
This document does not provide a preview.
Related products
-
ASTM-D6569 2000
D6569-00 Standard Test Method for On-Line Measurement of pH1 Published By Publication Date Number of…
-
ASTM-D6989 2008
D6989-03(2008) Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions Published By…
-
ASTM-D5969 2008
D5969-08 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic…
-
ASTM-D6966 2008(Redline)
D6966-08 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent…
-
ASTM-D6979 2018
D6979-18 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as…
-
ASTM-D6959 2008(Redline)
D6959-08 Standard Practice for Data Exchange Format for Sewn Product Plotting Devices (Redline) Published By…
-
ASTM-D6979 2008(Redline)
D6979-08 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as…
-
ASTM-D6963 2004
D6963-04 Standard Terminology Relating to Sewn Products Automation Published By Publication Date Number of Pages…
-
ASTM-D6960 2004
D6960-04 Standard Table of Body Measurements Relating to Women’s Plus Size Figure Type, Sizes 14W-32W…
-
ASTM-D6469 2004
D6469-04 Standard Guide for Microbial Contamination in Fuels and Fuel Systems Published By Publication Date…
-
ASTM-D696 2008
D696-08e1 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and…
-
ASTM-D6966 2008
D6966-08 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent…
-
ASTM-D6989 2003
D6989-03 Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions Published By…
-
ASTM-D6979 2003
D6979-03 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as…
-
ASTM-D696 2008
D696-08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and…
-
ASTM-D6929 2004
D6929-04 Standard Practice for Freezing of Emulsified Asphalts Published By Publication Date Number of Pages…
-
ASTM-D5969 2002
D5969-02 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic…
-
ASTM-D5969 2005
D5969-05 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic…
-
ASTM-D6966 2018(Redline)
D6966-18 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent…
-
ASTM-D6999 2004
D6999-04 Standard Practice for Miscibility of Emulsified Asphalts Published By Publication Date Number of Pages…
-
ASTM-D6979 2018(Redline)
D6979-18 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as…
-
ASTM-D6909 2003
D6909-03 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer Published By Publication Date…
-
ASTM-D6969 2003
D6969-03 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis Published By Publication…
-
ASTM-D6699 2001
D6699-01 Standard Practice for Sampling Liquids Using Bailers Published By Publication Date Number of Pages…
-
ASTM-D6968 2009
D6968-03(2009) Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural…
-
ASTM-D6959 2008
D6959-08 Standard Practice for Data Exchange Format for Sewn Product Plotting Devices Published By Publication…
-
ASTM-D696 2008(Redline)
D696-08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and…
-
ASTM-D6569 2005
D6569-05 Standard Test Method for On-Line Measurement of pH1 Published By Publication Date Number of…
-
ASTM-D6962 2005
D6962-05 Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings…
-
ASTM-D3969 2001
D3969-01 Standard Test Method for Zirconium in Paint Driers by EDTA Method Published By Publication…
-
ASTM-D6966 2018
D6966-18 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent…
-
ASTM-D6699 2006
D6699-01(2006) Standard Practice for Sampling Liquids Using Bailers Published By Publication Date Number of Pages…
-
ASTM-D6963 2004
D6963-04e1 Standard Terminology Relating to Sewn Products Automation Published By Publication Date Number of Pages…
-
ASTM-D6069 2006
D6069-01(2006) Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced…
-
ASTM-D2969 2004
D2969-04 Standard Test Methods for Steel Tire Cords Published By Publication Date Number of Pages…
-
ASTM-D696 2008(Redline)
D696-08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and…
-
ASTM-D6469 2008
D6469-08e1 Standard Guide for Microbial Contamination in Fuels and Fuel Systems Published By Publication Date…
-
ASTM-D6979 2008
D6979-08 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as…
-
ASTM-D6469 2008
D6469-08 Standard Guide for Microbial Contamination in Fuels and Fuel Systems Published By Publication Date…
-
ASTM-D6769 2002
D6769-02 Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing…