ASTM-D7572 2011
$40.63
D7572-11a Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil After Remediation of Process Releases
| Published By | Publication Date | Number of Pages |
| ASTM | 2011 | 8 |
1.1 This guide is applicable for the collection, extraction and preservation of extracts from mine rock and soil samples for the analysis of cyanide in the extracts. Responsibilities of field sampling personnel and the laboratory are indicated.
1.2 The sampling, preservation and extraction procedures described in this practice are recommended for the analysis of total cyanide, available cyanide, weak acid dissociable cyanide, and free cyanide by Test Methods D2036 , D4282 , D4374 , D6888 , D6994 , D7237 , and D7284 . The information supplied in this practice can also be applied to other analytical methods for cyanide, for example, US EPA Method 335.4.
1.3 The values stated in SI units are to be regarded as standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology |
| 2 | Summary of Guide Significance and Use Interferences Apparatus |
| 3 | TABLE 1 |
| 5 | FIG. 1 |
| 6 | Reagents Hazards Sampling Procedure TABLE 2 |
| 7 | Calculation Quality Control and Reporting Requirements |
| 8 | Keywords |
Related products
-
ASTM-D7572 2011
D7572-11 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D6572 2012(Redline)
D6572-12 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test…
-
ASTM-D772 2011
D772-86(2011) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints Published By…
-
ASTM-D5772 2010
D5772-10 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method) Published…
-
ASTM-D7672 2011
D7672-11 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies Published By…
-
ASTM-D7578 2015
D7578-15 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants Published…
-
ASTM-D7572 2015
D7572-15 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D7472 2019
D7472-19 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials Published By Publication Date Number of…
-
ASTM-D7573 2018(Redline)
D7573-18 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature…
-
ASTM-D7573 2018
D7573-18ae1 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature…
-
ASTM-D7570 2017
D7570-17 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering Published…
-
ASTM-D7672 2014(Redline)
D7672-14 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies (Redline) Published…
-
ASTM-D7592 2015(Redline)
D7592-15a Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel…
-
ASTM-D7542 2021(Redline)
D7542-21 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime…
-
ASTM-D7573 2018
D7573-18a Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature…
-
ASTM-D5772 2015(Redline)
D5772-15 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method) (Redline)…
-
ASTM-D7573 2018
D7573-18 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature…
-
ASTM-D7672 2011
D7672-11b Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies Published By…
-
ASTM-D7672 2011
D7672-11e1 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies Published By…
-
ASTM-D7572 2011(Redline)
D7572-11a Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D7570 2021
D7570-17(2021)e1 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering Published…
-
ASTM-D7872 2013
D7872-13 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation…
-
ASTM-D5572 2012
D5572-95(2012) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products Published By…
-
ASTM-D7672 2011(Redline)
D7672-11b Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies (Redline) Published…
-
ASTM-D7752 2011
D7752-11 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids Published By Publication Date…
-
ASTM-D7572 2013(Redline)
D7572-13 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D7372 2021(Redline)
D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results (Redline) Published By…
-
ASTM-D7572 2015(Redline)
D7572-15 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D7272 2011
D7272-06(2011) Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by…
-
ASTM-D7672 2011
D7672-11a Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies Published By…
-
ASTM-D7672 2011
D7672-11be1 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies Published By…
-
ASTM-D7575 2011(Redline)
D7575-11 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination (Redline)…
-
ASTM-D7752 2018
D7752-18 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids Published By Publication Date…
-
ASTM-D7772 2015
D7772-15 Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract Published By…
-
ASTM-D7527 2018
D7527-10(2018) Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep…
-
ASTM-D4572 2012
D4572-89(2012) Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur Published By Publication Date…
-
ASTM-D7572 2013
D7572-13 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D7272 2018
D7272-06(2018) Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by…
-
ASTM-D7772 2011
D7772-11 Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract Published By…
-
ASTM-D7575 2011
D7575-11 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination Published…
