ASTM-D7959 2024
$34.13
D7959-24 Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
| Published By | Publication Date | Number of Pages |
| ASTM | 2024 |
ASTM D7959-24
Active Standard: Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
ASTM D7959
Scope
1.1 This test method covers a rapid means of determining chloride content of aviation turbine fuel. This methodology is applicable for chloride concentrations between 0 mg/L to 0.5 mg/L. This methodology will not detect chlorine originating from chlorinated organic compounds (that is, covalent bond).
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Keywords
aviation turbine fuel; chloride; cleanliness; contamination; jet fuel; Jet A; Jet A-1; salt; seawater;
ICS Code
ICS Number Code 71.040.40 (Chemical analysis)
DOI: 10.1520/D7959-24
ASTM-D7959 2024(Redline)
$40.63
D7959-24 Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip (Redline)
| Published By | Publication Date | Number of Pages |
| ASTM | 2024 |
ASTM D7959-24
Redline Standard: Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
ASTM D7959
Scope
1.1 This test method covers a rapid means of determining chloride content of aviation turbine fuel. This methodology is applicable for chloride concentrations between 0 mg/L to 0.5 mg/L. This methodology will not detect chlorine originating from chlorinated organic compounds (that is, covalent bond).
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Keywords
aviation turbine fuel; chloride; cleanliness; contamination; jet fuel; Jet A; Jet A-1; salt; seawater;
ICS Code
ICS Number Code 71.040.40 (Chemical analysis)
DOI: 10.1520/D7959-24
Related products
-
ASTM-D4959 2024(Redline)
D4959-24 Standard Test Method for Determination of Water Content of Soil By Direct Heating (Redline)…
-
ASTM-D7959 2024(Redline)
D7959-24 Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test…
-
ASTM-D7989 2021(Redline)
D7989-21 Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed…
-
ASTM-D7929 2020
D7929-20 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells Published By…
-
ASTM-D7059 2021(Redline)
D7059-21 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography…
-
ASTM-D7599 2024
D7599-16(2024) Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by…
-
ASTM-D7954/D7954M 2014
D7954/D7954M-14 Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance…
-
ASTM-D7059 2021
D7059-21 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography…
-
ASTM-D7359 2014
D7359-14 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their…
-
ASTM-D7989 2020
D7989-20 Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed…
-
ASTM-D7989 2021
D7989-21 Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed…
-
ASTM-D7989 2020(Redline)
D7989-20 Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed…
-
ASTM-D7559/D7559M 2020
D7559/D7559M-09(2020) Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions Published By Publication…
-
ASTM-D7929 2020(Redline)
D7929-20 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells (Redline) Published…
-
ASTM-D4959 2024
D4959-24 Standard Test Method for Determination of Water Content of Soil By Direct Heating Published…
-
ASTM-D7359 2014
D7359-14a Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their…
-
ASTM-D7909 2014
D7909-14 Standard Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of…
-
ASTM-D7949 2014
D7949-14 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations Published By Publication…
-
ASTM-D7759/D7759M 2014(Redline)
D7759/D7759M-14 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration (Redline) Published By Publication…
-
ASTM-D7659 2021(Redline)
D7659-21 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection…
-
ASTM-D7953 2020(Redline)
D7953-20 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method…
-
ASTM-D7979 2020(Redline)
D7979-20 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent,…
-
ASTM-D7359 2023
D7359-23 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their…
-
ASTM-D7953 2020
D7953-20 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method…
-
ASTM-D7956/D7956M 2024
D7956/D7956M-16(2024) Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam…
-
ASTM-D7759/D7759M 2014
D7759/D7759M-14 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Published By Publication Date…
-
ASTM-D7659 2021
D7659-21 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection…
-
ASTM-D7359 2023(Redline)
D7359-23 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their…
-
ASTM-D7969 2024
D7969-16(2024) Standard Specification for Gravity Convection and Forced Ventilation Ovens Published By Publication Date Number…
-
ASTM-D7929 2014
D7929-14 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells Published By…
-
ASTM-D7909 2021
D7909-21a Standard Guide for Placement of Intentional Leaks During Electrical Leak Location Surveys of Geomembranes…
-
ASTM-D7909 2021
D7909-21 Standard Guide for Placement of (Blind) Actual Leaks During Electrical Leak Location Surveys of…
-
ASTM-D7952 2021
D7952-15(2021) Standard Test Method for Measuring Aspiration Potential of Aerosol Products Published By Publication Date…
-
ASTM-D7059 2004
D7059-04e1 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography…
-
ASTM-D7953 2014
D7953-14 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method…
-
ASTM-D7559/D7559M 2014(Redline)
D7559/D7559M-09(2014) Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions (Redline) Published By…
-
ASTM-D7909 2021(Redline)
D7909-21a Standard Guide for Placement of Intentional Leaks During Electrical Leak Location Surveys of Geomembranes…
-
ASTM-D7909 2021(Redline)
D7909-21 Standard Guide for Placement of (Blind) Actual Leaks During Electrical Leak Location Surveys of…
-
ASTM-D7359 2014(Redline)
D7359-14 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their…
-
ASTM-D7979 2020
D7979-20 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent,…
