ASTM-E1019:2018 Edition

$58.50

E1019-18 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques

Published By	Publication Date	Number of Pages
ASTM	2018	22

Guaranteed Safe Checkout

Categories: 77.040.30 - Chemical analysis of metals, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

ASTM E1019-18

Historical Standard: Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques

ASTM E1019

Scope

1.1 These test methods cover the determination of carbon, sulfur, nitrogen, and oxygen, in steel, iron, nickel, and cobalt alloys having chemical compositions within the following limits:

1.2 The test methods appear in the following order:

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Keywords

carbon content; cobalt alloys; combustion; determination; fusion; gas dosing; inert gas fusion; infrared absorption; iron alloys; nickel alloys; nitrogen content; oxygen content; steel alloys; sulfur content; thermal conductivity;

ICS Code

ICS Number Code 77.040.30 (Chemical analysis of metals)

DOI: 10.1520/E1019-18

Molybdenum	0.002 to 30.00
Sulfur	0.002 to 0.35
Cadmium	0.001 to 0.005
Oxygen	0.0005 to 0.03
Nitrogen by the Inert Gas Fusion and Thermal Conductivity Detection Test Method	32 – 42
Sulfur by the Combustion-Infrared Absorption Detection Test Method	55 – 65
Antimony	0.002 to 0.03
Phosphorus	0.001 to 0.90
Carbon	0.001 to 4.50
Silicon	0.001 to 6.00
Magnesium	0.001 to 0.05
Zinc	0.005 to 0.20
Tantalum	0.001 to 10.00
Zirconium	0.005 to 2.500
Beryllium	0.001 to 0.05
Chromium	0.005 to 35.00
Tin	0.002 to 0.35
Nickel	0.005 to 84.00
Manganese	0.01 to 20.0
Selenium	0.001 to 0.50
Copper	0.005 to 10.00
Nitrogen	0.0005 to 0.50
Titanium	0.002 to 5.00
Cerium	0.005 to 0.05
Arsenic	0.0005 to 0.10
Calcium	0.001 to 0.05
Carbon, Total, by the Combustion and Infrared Absorption or Thermal Conductivity Detection Test Method	10 – 20
Aluminum	0.001 to 18.00
Hydrogen	0.0001 to 0.0030
Element	Mass Fraction Range, %
Vanadium	0.005 to 5.50
Iron	0.01 to 100.0
Sulfur by the Combustion–Infrared Absorption Test Method (Potassium Sulfate Calibration) – Discontinued 2018	21 – 31
Cobalt	0.01 to 75.0
Niobium	0.002 to 6.00
Tellurium	0.001 to 0.35
Oxygen by the Inert Gas Fusion and Infrared Absorption or Thermal Conductivity Detection Test Method	43 – 54
Boron	0.0005 to 1.00
Tungsten	0.005 to 21.00
Bismuth	0.001 to 0.50
Lead	0.001 to 0.50
ICS Codes	77.040.30 - Chemical analysis of metals