ASTM-E1643:1998 Edition
$40.63
E1643-98 Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
Published By | Publication Date | Number of Pages |
ASTM | 1998 | 5 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. Weāre here to assist you 24/7.
Email:[email protected]
1.1 This practice covers procedures for installing flexible, prefabricated sheet membranes in contact with earth or granular fill used as vapor retarders under concrete slabs.
1.2 Conditions subject to frost, heave or hydrostatic pressure, or both, are beyond the scope of this practice.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
Standard Title | E1643-98 Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs |
---|---|
Published Code | ASTM |
Publication Date | 1998 |
Pages Count | 5 |
ICS Codes | 91.120.30 - Waterproofing |
Related products
-
ASTM-E1641:2023 Edition(Redline)
E1641-23 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method (Redline) Publishedā¦
-
ASTM-E1640:2018 Edition
E1640-18 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysisā¦
-
ASTM-E1643:2009 Edition
E1643-09 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1663:1999 Edition
E1663-95a(1999) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology Publishedā¦
-
ASTM-E1643:2024 Edition
E1643-24 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1633:2007 Edition
E1633-07 Standard Specification for Coded Values Used in the Electronic Health Record Published By Publicationā¦
-
ASTM-E1643:2017 Edition
E1643-11(2017) Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1243:1988 Edition
E1243-88 Test Method for Columbium and Tantalum in Ores and Concentrates Involving Ion Exchange (Withdrawnā¦
-
ASTM-E1634:2007 Edition
E1634-02(2007) Standard Guide for Performing Sputter Crater Depth Measurements Published By Publication Date Number ofā¦
-
ASTM-E1634:2011 Edition(Redline)
E1634-11 Standard Guide for Performing Sputter Crater Depth Measurements (Redline) Published By Publication Date Numberā¦
-
ASTM-E1623:2011 Edition(Redline)
E1623-11 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, andā¦
-
ASTM-E1641:2016 Edition(Redline)
E1641-16 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method (Redline) Publishedā¦
-
ASTM-E1643:2010 Edition
E1643-10 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1643:2018 Edition
E1643-18 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1643:2011 Edition
E1643-11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1643:2018 Edition
E1643-18a Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1683:2002 Edition
E1683-02 Standard Practice for Testing the Performance of Scanning Raman Spectrometers Published By Publication Dateā¦
-
ASTM-E1643:2005 Edition
E1643-98(2005) Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth orā¦
-
ASTM-E1943:2015 Edition
E1943-98(2015) Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sitesā¦
-
ASTM-F1643:2019 Edition
F1643-05(2019) Standard Test Methods for Detention Sliding Door Locking Device Assembly Published By Publication Dateā¦
-
ASTM-E1643:2018 Edition(Redline)
E1643-18a Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1641:2004 Edition
E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry Published By Publication Date Number ofā¦
-
ASTM-F1643:2001 Edition
F1643-01a Standard Test Methods for Detention Sliding Door Locking Device Assembly Published By Publication Dateā¦
-
ASTM-E1645:2016 Edition(Redline)
E1645-16 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion forā¦
-
ASTM-E1645:2021 Edition(Redline)
E1645-21 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion forā¦
-
ASTM-E1603:2006 Edition
E1603-99(2006) Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residualā¦
-
ASTM-E1603:1999 Edition
E1603-99 Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residualā¦
-
ASTM-E1643:2024 Edition(Redline)
E1643-24 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1643:2011 Edition(Redline)
E1643-11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used inā¦
-
ASTM-E1683:2014 Edition(Redline)
E1683-02(2014)e1 Standard Practice for Testing the Performance of Scanning Raman Spectrometers (Redline) Published By Publicationā¦
-
ASTM-E1653:2013 Edition
E1653-94(2013) Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides Published Byā¦
-
ASTM-E1693:2018 Edition
E1693-95(2018) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets Publishedā¦
-
ASTM-E1463:2004 Edition
E1463-92(2004) Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From theā¦
-
ASTM-E1143:2005 Edition
E1143-05 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respectā¦
-
ASTM-F1643:1995 Edition
F1643-95 Standard Test Methods for Detention Sliding Door Locking Device Assembly Published By Publication Dateā¦
-
ASTM-E1693:1999 Edition
E1693-95(1999) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets Publishedā¦
-
ASTM-E1623:2002 Edition
E1623-02 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, andā¦
-
ASTM-E1647:2016 Edition(Redline)
E1647-16 Standard Practice for Determining Contrast Sensitivity in Radiology (Redline) Published By Publication Date Numberā¦
-
ASTM-E1603:2011 Edition
E1603/E1603M-11 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gasā¦
-
ASTM-E1647:2022 Edition
E1647-16(2022) Standard Practice for Determining Contrast Sensitivity in Radiology Published By Publication Date Number ofā¦