🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASTM-E1996:2009 Edition

ASTM-E1996:2009 Edition

$44.96

E1996-09 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

Published By Publication Date Number of Pages
ASTM 2009 13
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Categories: , ,

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

1.1 This specification covers exterior windows, glazed curtain walls, doors, and impact protective systems used in buildings located in geographic regions that are prone to hurricanes.

1.2 This specification provides the information required to conduct Test Method E 1886 .

1.3 Qualification under this specification provides a basis for judgment of the ability of applicable elements of the building envelope to remain unbreached during a hurricane; thereby minimizing the damaging effects of hurricanes on the building interior and reducing the magnitude of internal pressurization. While this standard was developed for hurricanes, it may be used for other types of similar windstorms capable of generating windborne debris.

1.4 This specification provides a uniform set of guidelines based upon currently available information and research. As new information and research becomes available it will be considered.

1.5 All values are stated in SI units and are to be regarded as standard. Values given in parentheses are for information only. Where certain values contained in reference documents cited and quoted herein are stated in inch-pound units they must be converted by the user.

1.6 The following precautionary statement pertains only to the test method portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ^REFERENCE:

ASTM Standards:

C 719 Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

C 1135 Test Method for Determining Tensile Adhesion Properties of Structural Sealants

D 3575 Test Methods for Flexible Cellular Materials Made From Olefin Polymers

E 631 Terminology of Building Constructions

E 1886 Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

ASCE Standard:

ASCE 7 American Society of Civil Engineers Minimum Design Loads for Buildings and Other Structures

Other Standards:

International Residential Code 2000

^KEYWORDS: building envelope; curtain walls; cyclic pressure loading; doors; fenestration; hurricanes; impact protective systems; missile impact; windborne debris; windows; windstorms ^DOI: 10.1520/E1996-09 ^INDEX TERMS: Doors/door assemblies–specifications; Exterior doors–specifications; Exterior windows–specifications; Performance–building materials/applications (specifications); Windows/window assemblies–specifications; Curtain walls; Glazed curtain walls; Hurricanes; Storm shutters; Windborne debris ^STATUS: Dn Cn Sn Nn My ^APPROVAL: 20090401 ^PAGES: 13 ^COMMITTEE: E06 ^SUBCOMMITTEE: 5100 ^BOS: 04.12 ^ORGINFO: ^ACTION: STD_REVISION ^MISCPUB: ^PDESIG: E1996 ^PYEAR: 2009 ^CLASS: Specification

PDF Catalog

PDF Pages PDF Title
1 Scope
Referenced Documents
Terminology
2 Test Specimens
Test Methods
FIG. 1
3 FIG. 2
FIG. 3
FIG. 4
FIG. 5
TABLE 1
4 Missiles
Pass/Fail Criteria
TABLE 2
TABLE 3
TABLE 4
5 Product Qualification
Compliance Statement
Keywords
6 A1. FENESTRATION SUBSTITUTIONS
A1.1 Introduction
A1.2 Substitution Categories
A1.3 General Premises for Substitution
FIG. A1.1
7 A1.4 General
A1.5 Glazing Sealants, Adhesives, and Backbedding
A1.6 Glazing Tapes
A1.7 Glass Plies
FIG. A1.2
8 A1.8 Insulating Glass Units
A1.9 Insulating Glass Unit Spacers
A1.10 Asymmetrical Insulating Glass Unit Orientation
A1.11 Interlayer Type or Brand
A1.12 General
A1.13 Sliding-Projected-Dual Action Windows; Sliding Doors; and Hinged Doors Consisting of Sliding Door and Window Panels, Fixed Panels of Door or Window Assemblies, Window Sash, Window Vents, and Hinged Door Leafs
9 A1.14 Storefront Framing, Curtain Walls, Fixed Windows, and Mullions
A1.15 Skylight and Roof Windows
A2. IMPACT PROTECTIVE SYSTEM SUBSTITUTIONS
A2.1 Introduction
A2.2 Substitution Categories
A2.3 General Premises for Substitution
A2.4
A2.5
10 A2.6
A2.7 Accordion Systems
FIG. A2.1
FIG. A2.2
FIG. A2.3
11 A2.8 Bahama Systems
A2.9 Colonial Systems
A2.10 Panel Systems
A2.11 Roll Systems
X1. BREACHING OF THE BUILDING ENVELOPE
X1.1 Damage and Internal Pressurization
X1.2 Design Pressure and Product Qualification Under This Specification
FIG. A2.4
12 X2. IMPACT RISK ANALYSIS
X2.1 Summary of Risk Parameters
X2.2
X2.3 The Performance Objective of This Specification
13 X3. ASSEMBLY ELEVATION ABOVE THE GROUND
X3.1
REFERENCES

Related products

ASTM-E1996
$44.96