ASTM-E261:2015 Edition(Redline)
$32.50
E261-15 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques (Redline)
Published By | Publication Date | Number of Pages |
ASTM | 2015 | 23 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. Weāre here to assist you 24/7.
Email:[email protected]
1.1 This practice describes procedures for the determination of neutron fluence rate, fluence, and energy spectra from the radioactivity that is induced in a detector specimen.
1.2 The practice is directed toward the determination of these quantities in connection with radiation effects on materials.
1.3 For application of these techniques to reactor vessel surveillance, see also Test Methods E1005.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 1: Detailed methods for individual detectors are given in the following ASTM test methods: E262, E263, E264, E265, E266, E343, E393, E481, E523, E526, E704, E705, and E854.
Standard Title | E261-15 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques (Redline) |
---|---|
Published Code | ASTM |
Publication Date | 2015 |
Pages Count | 23 |
Related products
-
ASTM-E2613:2023 Edition(Redline)
E2613-23 Standard Practice for Determining the Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Usingā¦
-
ASTM-E2618:2013 Edition(Redline)
E2618-13 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Firedā¦
-
ASTM-E2611:2019 Edition
E2611-19 Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based onā¦
-
ASTM-E2619:2009 Edition(Redline)
E2619/E2619M-09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Areaā¦
-
ASTM-E2613:2023 Edition
E2613-23 Standard Practice for Determining the Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Usingā¦
-
ASTM-E2614:2020 Edition
E2614-15(2020)e1 Standard Guide for Evaluation of Cleanroom Disinfectants Published By Publication Date Number of Pagesā¦
-
ASTM-E261:2015 Edition
E261-15 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques Publishedā¦
-
ASTM-E2614:2015 Edition
E2614-15 Standard Guide for Evaluation of Cleanroom Disinfectants Published By Publication Date Number of Pagesā¦
-
ASTM-E2617:2017 Edition
E2617-17 Standard Practice for Validation of Empirically Derived Multivariate Calibrations Published By Publication Date Numberā¦
-
ASTM-E2611:2017 Edition
E2611-17 Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based onā¦
-
ASTM-E2611:2017 Edition(Redline)
E2611-17 Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based onā¦
-
ASTM-E2618:2013 Edition
E2618-13 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Firedā¦
-
ASTM-E2611:2024 Edition(Redline)
E2611-24 Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based onā¦
-
ASTM-E2617:2017 Edition(Redline)
E2617-17 Standard Practice for Validation of Empirically Derived Multivariate Calibrations (Redline) Published By Publication Dateā¦
-
ASTM-E261:2021 Edition
E261-16(2021) Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques Publishedā¦
-
ASTM-E2613:2014 Edition(Redline)
E2613-14 Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Usingā¦
-
ASTM-E261:2003 Edition
E261-03 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques Publishedā¦
-
ASTM-E2618:2008 Edition
E2618-08 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solidā¦
-
ASTM-E2611:2019 Edition(Redline)
E2611-19 Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based onā¦
-
ASTM-E2617:2008 Edition
E2617-08a Standard Practice for Validation of Empirically Derived Multivariate Calibrations Published By Publication Date Numberā¦
-
ASTM-E261:2016 Edition
E261-16 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques Publishedā¦
-
ASTM-E2617:2008 Edition
E2617-08 Standard Practice for Validation of Empirically Derived Multivariate Calibrations Published By Publication Date Numberā¦
-
ASTM-E2616:2014 Edition
E2616-09(2014) Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations Published Byā¦
-
ASTM-E2617:2008 Edition
E2617-08ae1 Standard Practice for Validation of Empirically Derived Multivariate Calibrations Published By Publication Date Numberā¦
-
ASTM-E2617:2009 Edition
E2617-09a Standard Practice for Validation of Empirically Derived Multivariate Calibrations Published By Publication Date Numberā¦
-
ASTM-E2619/E2619M:2017 Edition
E2619/E2619M-17 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Areaā¦
-
ASTM-E2616:2020 Edition
E2616-09(2020) Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations Published Byā¦
-
ASTM-E2619/E2619M:2017 Edition(Redline)
E2619/E2619M-17 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Areaā¦
-
ASTM-E2618:2019 Edition
E2618-13(2019) Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Firedā¦
-
ASTM-E261:2016 Edition(Redline)
E261-16 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques (Redline)ā¦
-
ASTM-E2613:2014 Edition
E2613-14 Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Usingā¦
-
ASTM-E2610:2011 Edition
E2610-08(2011) Standard Test Method for Sensory Analysis—Duo-Trio Test Published By Publication Date Number of Pagesā¦
-
ASTM-E2617:2009 Edition
E2617-09 Standard Practice for Validation of Empirically Derived Multivariate Calibrations Published By Publication Date Numberā¦
-
ASTM-E2619:2009 Edition
E2619/E2619M-09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Areaā¦
-
ASTM-E2611:2024 Edition
E2611-24 Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based onā¦
-
ASTM-E2619:2008 Edition
E2619-08 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Areaā¦
-
ASTM-E2610:2018 Edition
E2610-18 Standard Test Method for Sensory Analysis—Duo-Trio Test Published By Publication Date Number of Pagesā¦
-
ASTM-E2610:2018 Edition(Redline)
E2610-18 Standard Test Method for Sensory Analysis—Duo-Trio Test (Redline) Published By Publication Date Number ofā¦
-
ASTM-E2617:2010 Edition(Redline)
E2617-10 Standard Practice for Validation of Empirically Derived Multivariate Calibrations (Redline) Published By Publication Dateā¦
-
ASTM-E2614:2015 Edition(Redline)
E2614-15 Standard Guide for Evaluation of Cleanroom Disinfectants (Redline) Published By Publication Date Number ofā¦