ASTM-E354 2021(Redline)

$49.83

E354-21 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Redline)

Published By	Publication Date	Number of Pages
ASTM	2021

Guaranteed Safe Checkout

Categories: 77.140.40 - Steels with special magnetic properties, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

ASTM E354-21

Redline Standard: Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

ASTM E354

Scope

1.1 These test methods cover the chemical analysis of high-temperature, electrical, magnetic, and other similar iron, nickel, and cobalt alloys having chemical compositions within the following limits:

1.2 The test methods in this standard are contained in the sections indicated below:

1.3 Methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019.

1.4 Some of the composition ranges given in 1.1 are too broad to be covered by a single method and therefore this standard contains multiple methods for some elements. The user must select the proper method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.

1.5 Units—The values stated in SI units are to be regarded as standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Keywords

aluminum; atomic absorption; chromium; cobalt; cobalt alloys; copper; gravimetric; high temperature alloys; ion exchange; iron; magnetic alloys; manganese; molybdenum; nickel; nickel alloys; phosphorus; silicon; spectrometry; spectrophotometric; tin; titration; titrimetric;

ICS Code

ICS Number Code 77.140.40 (Steels with special magnetic properties)

DOI: 10.1520/E0354-21

Additional information

Copper by Neocuproine Spectrophotometric Method (0.01 % to 10.00 %)	90 – 99
Phosphorus by the Molybdenum Blue Spectrophotometric Method (0.002 % to 0.08 %)	19 – 30
Molybdenum by the Thiocyanate Spectrophotometric Method (0.01 % to 1.50 %)	153 – 164
Silicon by the Gravimetric Method (0.05 % to 5.00 %)	46 – 52
Manganese by the Metaperiodate Spectrophotometric Method (0.05 % to 2.00 %)	9 – 18
Sulfur by the Chromatographic Gravimetric Method—Discontinued 1980	108 – 115
Chromium by the Peroxydisulfate Oxidation—Titration Method (0.10 % to 33.00 %)	175 – 183
Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 % to 7.00 %)	100 – 107
Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 % to 75 %)	53 – 60
Carbon, Total, by the Combustion Gravimetric Method (0.05 % to 1.10 %)—Discontinued 2014	79 – 89
Tin by the Solvent Extraction–Atomic Absorption Spectrometry Method (0.002 % to 0.10 %)	143 – 152
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 % to 84.0 %)	135 – 142
Chromium by the Atomic Absorption Spectrometry Method (0.006 % to 1.00 %)	165 – 174
Molybdenum by the Ion Exchange—8-Hydroxyquinoline Gravi- metric Method (1.5 % to 30 %)	184 – 191
Cobalt by the Nitroso-R-Salt Spectrophotometric Method (0.10 % to 5.0 %)	61 – 70
Sulfur by the Gravimetric Method—Discontinued 1988	Former 30 – 36
Copper by the Sulfide Precipitation-Electrodeposition Gravimetric Method (0.01 % to 10.00 %)	71 – 78
Chromium by the Peroxydisulfate-Oxidation Titrimetric Method— Discontinued 1980	116 – 123
Sulfur by the Combustion-Iodate Titration Method (0.005 % to 0.1 %)—Discontinued 2014	37 – 45
Carbon, Total, by the Combustion-Thermal Conductivity Method—Discontinued 1986	124 – 134
Iron by the Silver Reduction Titrimetric Method (1.0 % to 50.0 %)	192 –199

ICS Codes	77.140.40 - Steels with special magnetic properties