ASTM-E468 2004
$40.63
E468-90(2004) Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
| Published By | Publication Date | Number of Pages |
| ASTM | 2004 | 6 |
1.1 This practice covers the desirable and minimum information to be communicated between the originator and the user of data derived from constant-force amplitude axial, bending, or torsion fatigue tests of metallic materials tested in air and at room temperature.
Note 1Practice E 466, although not directly referenced in the text, is considered important enough to be listed in this standard.
Related products
-
ASTM-E648 2006
E648-06 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heatā¦
-
ASTM-E448 2002
E448-82(2002)e1 Standard Practice for Scleroscope Hardness Testing of Metallic Materials Published By Publication Date Numberā¦
-
ASTM-E498 2006
E498-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gasā¦
-
ASTM-E428 2008(Redline)
E428-08 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Usedā¦
-
ASTM-E478 2008(Redline)
E478-08 Standard Test Methods for Chemical Analysis of Copper Alloys (Redline) Published By Publication Dateā¦
-
ASTM-F468 2005
F468-05 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use Publishedā¦
-
ASTM-E668 2000
E668-00 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardnessā¦
-
ASTM-E463 2009
E463-09 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry Publishedā¦
-
ASTM-E468 2004
E468-90(2004)e1 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials Publishedā¦
-
ASTM-F468 2001
F468-01a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use Publishedā¦
-
ASTM-E968 2008(Redline)
E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters (Redline) Published By Publicationā¦
-
ASTM-E428 2005
E428-05a Standard Practice for Fabrication and Control of Metal, Other than Aluminum Reference, Blocks Usedā¦
-
ASTM-E648 2008
E648-08a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heatā¦
-
ASTM-E648 2008
E648-08 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heatā¦
-
ASTM-E458 2008(Redline)
E458-08 Standard Test Method for Heat of Ablation (Redline) Published By Publication Date Number ofā¦
-
ASTM-E458 2008
E458-08 Standard Test Method for Heat of Ablation Published By Publication Date Number of Pagesā¦
-
ASTM-E648 2006
E648-06a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heatā¦
-
ASTM-E648 2014
E648-14 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heatā¦
-
ASTM-F468 2005
F468-05a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use Publishedā¦
-
ASTM-E463 2014(Redline)
E463-14a Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry (Redline)ā¦
-
ASTM-E448 2008
E448-82(2008) Standard Practice for Scleroscope Hardness Testing of Metallic Materials Published By Publication Date Numberā¦
-
ASTM-E463 2014
E463-14a Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry Publishedā¦
-
ASTM-B468 2004
B468-04 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes Published By Publicationā¦
-
ASTM-E648 2014
E648-14a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heatā¦
-
ASTM-E768 2005
E768-99(2005) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel Publishedā¦
-
ASTM-E460 2004
E460-04 Standard Practice for Determining Effect of Packaging on Food and Beverage Products During Storageā¦
-
ASTM-E438 2006
E438-92(2006) Standard Specification for Glasses in Laboratory Apparatus Published By Publication Date Number of Pagesā¦
-
ASTM-E478 2008
E478-08 Standard Test Methods for Chemical Analysis of Copper Alloys Published By Publication Date Numberā¦
-
ASTM-E465 2005
E465-00(2005) Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrationā¦
-
ASTM-E467 2008
E467-08 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testingā¦
-
ASTM-E968 2008
E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters Published By Publication Dateā¦
-
ASTM-E768 2004
E768-99(2004) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel Publishedā¦
-
ASTM-E408 2002
E408-71(2002) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques Published Byā¦
-
ASTM-E448 2002
E448-82(2002) Standard Practice for Scleroscope Hardness Testing of Metallic Materials Published By Publication Date Numberā¦
-
ASTM-E648 2004
E648-04 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heatā¦
-
ASTM-E968 2002
E968-02 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters Published By Publication Dateā¦
-
ASTM-E648 2014(Redline)
E648-14 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heatā¦
-
ASTM-E467 2004
E467-98a(2004) Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testingā¦
-
ASTM-E488 2003
E488-96(2003) Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements Published Byā¦
-
ASTM-E648 2009
E648-09a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heatā¦
