ASTM-F1971:1999 Edition
$35.75
F1971-99 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
Published By | Publication Date | Number of Pages |
ASTM | 1999 | 4 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This test method describes the measurement of the electrical resistance between the wheel of a mounted and inflated tire-wheel assembly and a flat conducting surface in loaded contact with the tire.
1.2 The method specifies procedures and equipment such that electrical resistance can be accurately determined for tires with values up to 10 12 ohms.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Title | F1971-99 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench |
---|---|
Published Code | ASTM |
Publication Date | 1999 |
Pages Count | 4 |
ICS Codes | 83.160.01 - Tyres in general |
Related products
-
ASTM-F1911:2019 Edition
F1911-05(2019) Standard Practice for Installation of Barbed Tape Published By Publication Date Number of Pages…
-
ASTM-F1975:2023 Edition
F1975-15(2023) Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers Published By Publication Date…
-
ASTM-F1951:2021 Edition
F1951-21 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment…
-
ASTM-F1979
F1979-17 Standard Specification for Projectiles Used in the Sport of Paintball Published By Publication Date…
-
ASTM-F1971:2012 Edition
F1971-12 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench…
-
ASTM-F1371:2009 Edition
F1371-04(2009) Standard Specification for Vegetable Peeling Machines, Electric Published By Publication Date Number of Pages…
-
ASTM-F1971:2012 Edition(Redline)
F1971-12 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench…
-
ASTM-F1371:2018 Edition
F1371-13(2018)e1 Standard Specification for Vegetable Peeling Machines, Electric Published By Publication Date Number of Pages…
-
ASTM-F1871:1998 Edition
F1871-98e1 Standard Specification for Folder/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and…
-
ASTM-F1871:2020 Edition
F1871-20 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and…
-
ASTM-F1871:2024 Edition(Redline)
F1871-24 Standard Specification for Folded/Formed Poly-(Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit…
-
ASTM-E1971:2005 Edition
E1971-05 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings Published By…
-
ASTM-F1973:2013 Edition
F1973-13 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and…
-
ASTM-F1970:2023 Edition
F1970-23 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl…
-
ASTM-F1977:2010 Edition
F1977-04(2010) Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System…
-
ASTM-F1971:2005 Edition
F1971-05 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench…
-
ASTM-F1991:1999 Edition
F1991-99 Standard Test Method for Performance of Chinese (Wok) Ranges Published By Publication Date Number…
-
ASTM-F1973:2008 Edition
F1973-08 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and…
-
ASTM-F1973:2012 Edition
F1973-12 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and…
-
ASTM-F1973:2005 Edition
F1973-05 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and…
-
ASTM-F1791:2006 Edition
F1791-00(2006) Standard Specification for Filters Used in Air or Nitrogen Systems Published By Publication Date…
-
ASTM-F1771:1997 Edition
F1771-97 Standard Test Method for Evaluating Gate Oxide Integrity by Voltage Ramp Technique Published By…
-
ASTM-F1941:2007 Edition
F1941-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR)) Published…
-
ASTM-F1471:2001 Edition
F1471-93(2001) Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System…
-
ASTM-F1978:2022 Edition(Redline)
F1978-22 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using…
-
ASTM-F1975:2002 Edition
F1975-02 Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers Published By Publication Date…
-
ASTM-F1671:2007 Edition(Redline)
F1671-07 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by…
-
ASTM-F1951:2009 Edition
F1951-09a Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment…
-
ASTM-F1976:2013 Edition(Redline)
F1976-13 Standard Test Method for Impact Attenuation of Athletic Shoe Cushioning Systems and Materials (Redline)…
-
ASTM-F1973:2002 Edition
F1973-02 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and…
-
ASTM-F1941:2000 Edition
F1941-00 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR)) Published…
-
ASTM-D1971:2016 Edition
D1971-16 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic…
-
ASTM-F1972:2013 Edition(Redline)
F1972-13 Standard Guide for Terminology Relating to Candles and Associated Accessory Items (Redline) Published By…
-
ASTM-F1071:2018 Edition
F1071-94(2018) Standard Specification for Expanded-Metal Bulkhead Panels Published By Publication Date Number of Pages ASTM…
-
ASTM-F1917:2020 Edition(Redline)
F1917-20 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories (Redline) Published By…
-
ASTM-F1971:2018 Edition
F1971-12(2018) Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench…
-
ASTM-F1271:1995 Edition
F1271-90(1995)e1 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications…
-
ASTM-F1974:2009 Edition
F1974-09 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure…
-
ASTM-F1970:2022 Edition
F1970-22 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl…
-
ASTM-F1981:1999 Edition
F1981-99 Standard Specification for Suction Catheters for Use in the Respiratory Tract (Withdrawn 2007) Published…