ASTM-F2437 2006
$40.63
F2437-06 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
| Published By | Publication Date | Number of Pages |
| ASTM | 2006 | 5 |
1.1 This specification covers the requirements for carbon and alloy steel compressible-washer-type direct tension indicators capable of indicating a specified bolt tension in cap screws, bolts, anchors, and studs.
1.2 Direct tension indicators in nominal diameter sizes 1/4 through 21/2 in. are covered.
1.3 There are two Types of DTIs covered by this specification, Type 1 and Type 2.
1.3.1 Type 1 DTIs are suitable for comparatively large bearing surfaces. Type 1 DTIs are available in Grades 55 and 105, which differ in the amount of tension they indicate at a prescribed gap (see ).
1.3.2 Type 2 DTIs are suitable for comparatively smaller bearing surfaces. Type 2 DTIs are available in Grades 5 and 8, which differ in the amount of tension they indicate at a prescribed gap (see ).
1.4 Direct tension indicators are intended for installation under a bolt or cap screw head, a hex nut, or against a hardened washer or other flat hardened surface.
The following precautionary statement pertains only to the test method portions, Section and Appendix XI of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents |
| 2 | Terminology Ordering Information Materials and Manufacture TABLE 1 |
| 3 | Chemical Composition Performance Requirements Dimensions Workmanship, Finish and Appearance Number of Tests and Retests FIG. 1 TABLE 2 |
| 4 | Specimen Preparation Test Methods Inspection TABLE 3 TABLE 4 |
| 5 | Rejection Certification Responsibility Product Marking Packaging and Package Marking Storage Keywords |
Related products
-
ASTM-F2407 2006
F2407-06 Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities Published By Publication…
-
ASTM-F2337 2016(Redline)
F2337-16 Standard Test Method for Treestand Fall Arrest System (Redline) Published By Publication Date Number…
-
ASTM-F2467 2006(Redline)
F2467-06 Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications…
-
ASTM-F2439 2016
F2439-06(2016) Standard Specification for Headgear Used in Soccer Published By Publication Date Number of Pages…
-
ASTM-F2473 2005
F2473-05 Standard Test Method for Performance of Water-Bath Rethermalizers Published By Publication Date Number of…
-
ASTM-E2437 2005
E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals,…
-
ASTM-F2427 2004
F2427-04 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-F2337 2016
F2337-16 Standard Test Method for Treestand Fall Arrest System Published By Publication Date Number of…
-
ASTM-F2427 2005
F2427-05 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-F2457 2005
F2457-05 Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft Published By…
-
ASTM-F2537 2006
F2537-06 Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion Published…
-
ASTM-F2457 2009
F2457-05(2009) Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft Published By…
-
ASTM-F2435 2005
F2435-05 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe Published By Publication Date Number…
-
ASTM-F2436 2005
F2436-05 Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using…
-
ASTM-F2237 2008
F2237-03(2008) Standard Test Method for Performance of Upright Overfired Broilers Published By Publication Date Number…
-
ASTM-F2037 2000
F2037-00 Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping…
-
ASTM-F2477 2006
F2477-06 Standard Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents Published By…
-
ASTM-F2434 2004
F2434-04 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked…
-
ASTM-F2447 2007
F2447-05(2007) Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft Published By Publication Date…
-
ASTM-F2432 2004
F2432-04 Standard Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment Published By Publication…
-
ASTM-F2477 2007(Redline)
F2477-07 Standard Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents (Redline) Published…
-
ASTM-F2438 2004
F2438-04 Standard Specification for Oil Spill Response Boom Connection: Slide Connector Published By Publication Date…
-
ASTM-F2439 2006
F2439-06 Standard Specification for Headgear Used in Soccer Published By Publication Date Number of Pages…
-
ASTM-F2477 2007
F2477-07 Standard Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents Published By…
-
ASTM-F2427 2005
F2427-05a Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-F2457 2007
F2457-05(2007) Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft Published By…
-
ASTM-F2427 2008
F2427-05a(2008) Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-F2434 2008
F2434-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked…
-
ASTM-F2433 2005
F2433-05 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness Published By Publication Date Number…
-
ASTM-F2337 2003
F2337-03 Standard Test Method for Treestand Fall Arrest System Published By Publication Date Number of…
-
ASTM-F2447 2005
F2447-05 Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft Published By Publication Date…
-
ASTM-F2447 2009
F2447-05(2009) Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft Published By Publication Date…
-
ASTM-F2037 2006
F2037-00(2006) Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping…
-
ASTM-F2337 2008
F2337-08 Standard Test Method for Treestand Fall Arrest System Published By Publication Date Number of…
-
ASTM-F2347 2003
F2347-03 Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use…
-
ASTM-F437 2006
F437-06 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 Published…
-
ASTM-F2435 2007
F2435-07 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe Published By Publication Date Number…
-
ASTM-F2497 2005
F2497-05 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub…
-
ASTM-F2487 2006
F2487-06 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene…
-
ASTM-F2467 2006
F2467-06 Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications…
