BS 4592-5:1995:2003 Edition
$102.76
Industrial type flooring, walkways and stair treads – Specification for solid plates in steel, aluminium and glass reinforced plastics
| Published By | Publication Date | Number of Pages |
| BSI | 2003 | 18 |
Materials, sizes, permissible deviations, construction, performance, information to be given in an enquiry or order and marking. Annexes give methods of test and recommendations for installation.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | BRITISH STANDARD |
| 2 | Committees responsible for this British�Standard |
| 3 | Contents |
| 5 | 1 Scope 2 References 3 Definitions 3.1 types of plate 3.1.1 plain 3.1.2 chequer 3.2 sizes of plate 3.2.1 span 3.2.2 width |
| 6 | 3.2.3 length 3.2.4 breadth 3.2.5 effective span 3.2.6 depth 3.2.7 thickness 3.3 supports 3.3.1 simply supported 3.3.2 encastré 3.3.3 butt strap 3.3.4 primary support 3.3.5 secondary support 3.3.6 curb angle 3.3.7 shelf angle 3.3.8 tread support |
| 7 | 3.4 toe plate 3.5 nosing or sight bar 3.6 cut-out 3.7 sealant |
| 8 | Figure 1 Plating terms |
| 9 | 4 Information to be supplied Table 1 Thicknesses and widths of plate Table 2 Loads |
| 10 | 5 Materials 5.1 Steel 5.2 Aluminium 5.3 GRP 5.4 Protection against corrosion 6 Sizes 7 Permissible tolerances 8 Construction 8.1 Plates shall be supported on all sides, but for an increased load-carrying capacity with a co… 8.2 Secondary supports shall be used to provide support for sides of plates. 8.3 Encastré plates that are bolted to supports shall be bolted down near the corners, approximat… 8.4 Toe plates specifically required around cut-outs in plates shall be formed from flat sections… |
| 11 | 8.5 Bonding toe plates shall be carried out using a suitable resin adhesive. 8.6 Low carbon steel shall be arc welded in accordance with BS�5135. 8.7 Stainless steel shall be welded in accordance with BS�4872-1. 8.8 Aluminium shall be welded in accordance with BS�8118-2. 9 Performance Load factors and combinations 9.1 General 9.2 Flooring and walkways 9.3 Treads |
| 12 | Figure 2 Imposed loads on treads 10 Marking 10.1 The following particulars shall be given on the delivery note, invoice or supplier’s certifi… 10.2 Plates shall be marked with a reference number to assist assembly on site. |
| 13 | Annex A (normative) Method of test for strength and deflection (normative) Method of test for strength and deflection A.1 Test procedure A.2 Method of support A.3 Uniformly distributed load (flooring or walkway) A.3.1 Load application A.3.2 Deflection monitoring A.4 Concentrated load (flooring or walkways) A.4.1 Load application A.4.2 Deflection monitoring A.5 Concentrated load (treads) A.5.1 Load application A.5.2 Deflection monitoring |
| 14 | Annex B (informative) Recommendations for installation of plates (informative) Recommendations for installation of plates B.1 General B.2 Fixing methods B.3 Supports for stair treads B.4 Erection clearances |
| 15 | Figure B.1 Fixing dimensions for bolted end supports |
