BS 958:1968
$86.31
Specification for spirit levels for use in precision engineering
| Published By | Publication Date | Number of Pages |
| BSI | 1968 | 12 |
1.1 This British Standard specifies requirements for spirit levels for use in precision engineering. It provides for three types of levels as follows:
Type 1. A spirit level with an unrelieved flat base of steel hardened and lapped.
This type of level is usually made with base lengths from about 100 mm to 200 mm. The advantage of the lapped base is that the base length of the level can be varied at will by wringing two slip gauges on to the base at the desired distance apart.
Type 2. A spirit level, mounted in a body usually of cast iron or steel, having a base formed with flat bearing surfaces at the two ends, i.e. the middle portion is relieved.
The bearing surfaces may either be plain or contain a longitudinal 120° V-groove for use on cylindrical surfaces. In the latter case a short cross-level or small circular level is provided.
This type of level is usually made with base lengths from about 250 mm to 500 mm.
Type 3. A square block level, usually of cast iron, and about 200 mm square.
Accuracy of performance for three types of level. Sensitivities and scale, general features of design, adjustments and finish, accuracy of working surfaces. Notes on the choice of sensitivity of a level appended.
Related products
-
BS 358:1960
Method for the measurement of voltage with sphere-gaps (one sphere earthed) Published By Publication Date…
-
BS L 158:1978
Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at…
-
BS 2945:1958:1974 Edition
Specification for axes and hatchets Published By Publication Date Number of Pages BSI 1974 21
-
BS 950-2:1967
Specification for artificial daylight for the assessment of colour – Viewing conditions for the graphic…
-
BS 957-2:1969
Specification for feeler gauges – Metric units Published By Publication Date Number of Pages BSI…
-
BS 3057:1958
Specification for untreated asbestos paper for electrical purposes Published By Publication Date Number of Pages…
-
BS 598-110:1998:1999 Edition
Sampling and examination of bituminous mixtures for roads and other paved areas – Methods of…
-
BS 2955:1958:1965 Edition
Glossary of terms relating to powders Published By Publication Date Number of Pages BSI 1965…
-
BS 3048:1958
Code for the continuous sampling and automatic analysis of flue gases: indicators and recorders Published…
-
BS 951:1986
Specification for clamps for earthing and bonding purposes Published By Publication Date Number of Pages…
-
BS 450:1958
Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads) Published By Publication…
-
BS 562:1958:1982 Edition
Specification. Reversible connectors Published By Publication Date Number of Pages BSI 1982 26
-
BS 463-1:1958
Specification for sockets for wire ropes – Inch units Published By Publication Date Number of…
-
BS 2979:1958
Transliteration of Cyrillic and Greek characters Published By Publication Date Number of Pages BSI 1958…
-
BS 1113:1958
Water tube boilers Published By Publication Date Number of Pages BSI 1958 122
-
BS 3036:1958
Specification. Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth) Published…
-
BS 950-1:1967
Specification for artificial daylight for the assessment of colour – Illuminant for colour matching and…
-
BS 998:1969:1971 Edition
Specification for vacuum salt for butter and cheese making and other food uses Published By…
-
BS 903-B19:1958:1961 Edition
Methods of testing vulcanized rubber. – Preparation and examination of water extract Published By Publication…
-
BS 768:1958
Specification for slotted grub screws Published By Publication Date Number of Pages BSI 1958 14
-
BS 2997:1958
Specification for aluminium rainwater goods Published By Publication Date Number of Pages BSI 1958 43
-
BS 2996:1958
Specification for the projection welding of low carbon wrought steel studs, bosses, bolts, nuts and…
-
BS 2987:1958
Notes on the application of statistics to paper testing Published By Publication Date Number of…
-
BS 978-5:1965
Specification for fine pitch gears – Hobs and cutters Published By Publication Date Number of…
-
BS C 10:1958
Coupling dimensions for aircraft ground air-conditioning connections Published By Publication Date Number of Pages BSI…
-
BS 464:1958
Specification for thimbles for wire ropes Published By Publication Date Number of Pages BSI 1958…
-
BS 3059:1958
Specification for steel boiler and superheater tubes Published By Publication Date Number of Pages BSI…
-
BS 3037-1:1958
Specification for tyres for crane rail wheels – Double-flanged parallel-tread tyres Published By Publication Date…
-
BS 3026:1958
Specification. Voltages for high-voltage d.c. transmission systems Published By Publication Date Number of Pages BSI…
-
BS 3060:1958
Specification for school chalks Published By Publication Date Number of Pages BSI 1958 8
-
BS 2957:1958
Specification for fireman’s axe with ash handle Published By Publication Date Number of Pages BSI…
-
BS 978-1:1968
Specification for fine pitch gears. – Involute spur and helical gears Published By Publication Date…
-
BS SP 76:1958
Snap head steel rivets for aircraft Published By Publication Date Number of Pages BSI 1958…
-
BS 3052:1958:1970 Edition
Specification. Electric shaver supply units Published By Publication Date Number of Pages BSI 1970 16
-
BS 1259:1958
Intrinsically safe electrical apparatus and circuits for use in explosive atmospheres Published By Publication Date…
-
BS 2977:1958
Domestic lighting appliances for use with liquefied petroleum gases Published By Publication Date Number of…
-
BS 2950:1958
Specification. Cartridge fuse-links for telecommunication and light electrical apparatus Published By Publication Date Number of…
-
BS 46-1:1958
Keys and keyways and taper pins – Specification. Keys and keyways Published By Publication Date…
-
BS 1219:1958
Recommendations for preparation of mathematical copy and correction of mathematical proofs Published By Publication Date…
-
BS 2983:1958
Specification for hypodermic dental needles Published By Publication Date Number of Pages BSI 1958 12
