BS EN 13445-1:2021 – TC
$258.95
Tracked Changes. Unfired pressure vessels – General
Published By | Publication Date | Number of Pages |
BSI | 2021 | 152 |
This document defines the terms, definitions, quantities, symbols and units that are used throughout the EN 13445 series and gives general information on the design and manufacturing of vessels under this standard. It also contains instructions on how to use the standard (Annex A) as well as an index which covers the whole standard (Annex B). This information is aimed to aid users of the EN 13445 series. This document applies to unfired pressure vessels with a maximum allowable pressure greater than 0,5 bar gauge but may be used for vessels operating at lower pressures, including vacuum. This document is not applicable to pressure vessels of the following types: – vessels of riveted construction; – vessels of lamellar cast iron or any other materials not included in Parts 2, 6, or 8 of the standard; – multilayered, autofrettaged or pre-stressed vessels. This document can be applied to the following pressure vessels, provided that account is taken of additional and/or alternative requirements resulting from the hazard analysis and from rules or instructions specific for: – transportable vessels; – items specifically designed for nuclear use; – pressure vessels with a risk of overheating. NOTE EN 14222 covers electrically fired boilers made from stainless steel and can be used as an example of additional requirements for such vessels. Other European standards apply to industrial piping (EN 13480 series) and to water tube and shell boilers (EN 12952 series and EN 12953 series).
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | compares BS EN 13445-1:2021 |
2 | TRACKED CHANGES Text example 1 — indicates added text (in green) |
3 | Contractual and legal considerations |
4 | Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication |
7 | ForewordEuropean foreword |
9 | Introduction Part 1 Part 2 Part 3 Part 4 |
10 | Part 5 Part 6 Part 7 Part 8 Part 9 Part 10 |
11 | 2 Normative references |
12 | 3 Terms and definitions 3.1 3.2 3.3 3.4 3.5 |
13 | 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 |
14 | 3.15 3.16 3.17 3.18 3.19 3.20 4 Interdependency of the parts of the series 5 Quantities, symbols and units |
15 | Table 5-1 — Quantities for space and time |
17 | 6 Risk assessment and handling 6.1 Hazards 6.2 Hazard removal and risk reduction 6.2.1 General 6.2.2 Design considerations |
18 | Figure 6.2-1 — Hazard consideration |
19 | A.2 General A.3 Prerequisites |
20 | A.4 Materials A.4.1 General A.4.2 Permitted materials |
21 | A.4.3 Prevention of brittle fracture A.4.4 Material grouping A.5 Design A.5.1 General |
22 | A.5.2 Design for static loads |
23 | A.5.3 Design in the creep range |
24 | A.5.4 Design for cyclic loads (fatigue) A.5.5 Nominal design stresses A.5.6 Weld details |
25 | A.5.7 Access openings A.6 Manufacturing A.6.1 General A.6.2 Tolerances A.6.3 Forming |
26 | A.6.4 Welding A.6.5 Production tests on welds A.6.6 PWHT (Post Weld Heat Treatment) |
27 | A.6.7 Other types of joints A.7 Inspection and testing A.7.1 General A.7.2 Technical documentation A.7.3 Non-destructive testing of welds A.7.4 Final assessment |
28 | A.7.5 Marking and records A.8 Pressure vessels constructed from spheroidal graphite cast iron A.8.1 General A.8.2 Materials A.8.3 Design |
29 | A.8.4 Welding A.8.5 Testing and final assessment A.9 Pressure vessels constructed from aluminium and aluminium alloys A.9.1 General A.9.2 Materials A.9.3 Design A.9.4 Manufacturing |
30 | Table A.9-1 — Deviations in EN 13445-8:2014EN 13445-8:2021 from EN 13445-4:2014EN 13445-4:2021 Table A.9-2 — Deviations in EN 13445-8:2014EN 13445-8:2021 from EN 13445-5:2014EN 13445-5:2021 rules |
31 | A.10.2 Materials A.10.3 Design A.10.3A.10.4 Manufacturing |
32 | Table A.10-3 — Deviations in EN 13445-10:2015EN 13445-10:2021 from EN 13445-4:2014EN 13445-4:2021 Table A.10-4 — Deviations in EN 13445-10:2015EN 13445-10:2021 from EN 13445-5:2014EN 13445-5:2021 rules |
73 | Table X.1 — List of Essential Safety Requirements for Unfired Steel Pressure Vessels |
77 | Table X.2 — List of Essential Safety Requirements for Unfired Pressure Vessels Made From Spheroidal Graphite Cast Iron |
79 | Table X.3 — List of Essential Safety Requirements for Unfired Aluminium Pressure Vessels |
83 | Table X.4 — List of Essential Safety Requirements for Unfired Nickel Pressure Vessels |
85 | (informative) 5.1Y.1 Differences between EN 13445:2009EN 13445:2014 and EN 13445:20014EN 13445:2021 5.2 List of corrected pages of Issue 2 (2015-07) 5.3 List of corrected pages of Issue 3 (2016-07) 5.4 List of corrected pages of Issue 4 (2017-07) 5.5 List of corrected pages of Issue 5 (2018-07) |
86 | Annex ZA (informative) Table ZA.1 — Correspondence between this European Standard and Directive 2014/68/EU |
87 | Bibliography |
90 | undefined |
96 | Introduction |
98 | 1 Scope 2 Normative references |
99 | 3 Terms and definitions |
101 | 4 Interdependency of the parts of the series 5 Quantities, symbols and units |
104 | 6 Risk assessment and handling |
106 | Annex A (informative)Using the standard A.1 Purpose A.2 General A.3 Prerequisites |
107 | A.4 Materials A.4.1 General A.4.2 Permitted materials |
108 | A.4.3 Prevention of brittle fracture A.4.4 Material grouping A.5 Design A.5.1 General |
109 | A.5.2 Design for static loads |
110 | A.5.3 Design in the creep range |
111 | A.5.4 Design for cyclic loads (fatigue) A.5.5 Nominal design stresses A.5.6 Weld details |
112 | A.5.7 Access openings A.6 Manufacturing A.6.1 General A.6.2 Tolerances A.6.3 Forming |
113 | A.6.4 Welding A.6.5 Production tests on welds A.6.6 PWHT (Post Weld Heat Treatment) |
114 | A.6.7 Other types of joints A.7 Inspection and testing A.7.1 General A.7.2 Technical documentation A.7.3 Non-destructive testing of welds A.7.4 Final assessment |
115 | A.7.5 Marking and records A.8 Pressure vessels constructed from spheroidal graphite cast iron A.8.1 General A.8.2 Materials A.8.3 Design |
116 | A.8.4 Welding A.8.5 Testing and final assessment A.9 Pressure vessels constructed from aluminium and aluminium alloys A.9.1 General A.9.2 Materials A.9.3 Design A.9.4 Manufacturing |
117 | A.9.5 Inspection and testing |
118 | A.10 Pressure vessels constructed from nickel and nickel alloys A.10.1 General A.10.2 Materials A.10.3 Design A.10.4 Manufacturing |
119 | A.10.5 Inspection and testing |
120 | Annex B (informative)Index |
141 | Annex X (informative)List of Essential Safety Requirements |
148 | Annex Y (informative)History of EN 13445-1 Y.1 Differences between EN 13445:2014 and EN 13445:2021 |
149 | Annex ZA (informative)Relationship between this European Standard and the essential requirements of Directive 2014/68/EU aimed to be covered |