BS EN 1457:1999:2007 Edition
$167.15
Chimneys. Clay/ceramic flue liners. Requirements and test methods
| Published By | Publication Date | Number of Pages |
| BSI | 2007 | 40 |
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | BRITISH STANDARD |
| 2 | National foreword |
| 4 | Foreword Foreword to amendment A1 Contents |
| 5 | 1 Scope 2 Normative references 3 Flue liners and openings 3.1 Flue liner cross-sections Examples of cross-section configuration |
| 6 | Joint configuration 3.2 Inspection openings, chimney junctions and inspection doors Examples of inspection openings and chimney junctions |
| 7 | 4 Definitions nominal size nominal height nominal angle of curvature resistance to fire of flue liners Internal height Angle of curvature 5 ! |
| 8 | Types of clay/ceramic flue liners, conditions of use, air test pressures and maximum air permeability rates after thermal testing 6 Materials 7 !Tolerances on dimensions” 7.1 !Transverse dimension 7.2 Height 7.3 Angle of curvature |
| 9 | 7.4 Straightness 7.5 Squareness of ends 7.6 Deviation from shape of cross-section 7.7 Joints 8 Proof load 8.1 Straight flue liners 8.2 Curved flue liners 8.3 Minimum load for inspection opening sections Minimum load |
| 10 | 9 !Gastightness, thermal shock resistance and resistance to fire for straight flue liners” 9.1 Initial test 9.2 Final gas tightness after thermal shock testing (sootfire) 9.3 Final gas tightness after thermal shock testing Test temperature, differential pressure and permeability rate |
| 11 | 10 Acid resistance Acid resistance 11 Water absorption and bulk density 11.1 General 12 !Abrasion resistance” 13 Water vapour permeability and flow resistance 13.1 Water vapour permeability 13.2 Flow resistance 14 Thermal resistance |
| 12 | 15 Evaluation of conformity 15.1 Initial type testing 15.2 Further type tests Factory production control and type tests 15.3 Factory production control 16 Test methods 16.1 Size |
| 13 | 16.2 Height 16.3 Angle of curvature 16.4 Straightness 16.5 Squareness of ends Deviation from straightness |
| 14 | Squareness test for ends |
| 15 | 16.6 Deviation from shape of cross-section Squareness test for angles and flatness of walls |
| 16 | 16.7 Proof load |
| 17 | 16.8 Thermal testing |
| 18 | Hot air generator |
| 19 | Test temperature and time to test temperature |
| 20 | 16.9 Acid resistance |
| 21 | 16.10 Water absorption |
| 22 | 16.11 Bulk density |
| 23 | 16.12 Sweeping resistance Test assembly for sweeping resistance test |
| 24 | 16.13 Water and vapour flow test Water and vapour flow test vessel Water and vapour flow test apparatus |
| 25 | 17 Designation 18 Marking |
| 26 | (normative) Sampling procedures for an AQL of 10 % and inspection level S2 (normative) Sampling procedures for an AQL of 10 % and inspection level S2 Acceptability determination Single sampling Double sampling Normal inspection Sampling plans for normal inspection |
| 27 | Summary of sampling procedures (continuous batches) |
| 28 | Normal to reduced inspection Sampling plans for reduced inspection Limit number of defectives for normal to reduced inspection Reduced to normal inspection Tightened inspection Sampling plans for tightened inspection Tightened to normal inspection Discontinuation of inspection |
| 29 | !(normative)” Thermal resistance !(normative)” Thermal resistance General Data Thermal properties of the material |
| 30 | Boundary conditions Specific conditions for the cavities |
| 32 | Calculations Mesh Finite difference equation |
| 33 | (normative) Measurement of the coefficient of friction of chimneys (normative) Measurement of the coefficient of friction of chimneys Roughness measuring rig |
| 35 | (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive Scope and relevant characteristics Scope and relevant clauses |
| 36 | Procedure of attestation of conformity of clay/ceramic flue liners and fittings System of attestation of conformity Attestation of conformity system Assignment of evaluation of conformity tasks EC Certificate and Declaration of conformity |
| 37 | CE Marking and labelling Example of CE Marking on the product |
| 38 | Example of CE Marking information in the accompanying documents |
