BS EN 3913:2007
$86.31
Aerospace series. Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components
| Published By | Publication Date | Number of Pages |
| BSI | 2007 | 10 |
This standard specifies the characteristics of short, self-locking, thin wall salvage inserts with silver plated internal thread, in NI-PH2601 (NI-P100HT), for aerospace applications. Maximum test temperature 550 °C.
Related products
-
BS EN 313-2:2000
Plywood. Classification and terminology – Terminology Published By Publication Date Number of Pages BSI 2000…
-
BS EN 3915:2008
Aerospace series. Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601…
-
BS EN ISO 11607-1:2017 – TC:2019 Edition
Tracked Changes. Packaging for terminally sterilized medical devices – Requirements for materials, sterile barrier systems…
-
BS EN ISO 15876-2:2003:2007 Edition
Plastics piping systems for hot and cold water installations. Polybutylene (PB) – Pipes Published By…
-
BS EN 391:2002
Glued laminated timber. Delamination test of glue lines Published By Publication Date Number of Pages…
-
BS EN 3923:2001
Aerospace series. Nickel base alloy NI – B41203 (NiCr7Si5B3Fe3). Filler metal for brazing. Powder or…
-
BS EN 771-2:2003:2005 Edition
Specification for masonry units – Calcium silicate masonry units Published By Publication Date Number of…
-
BS EN 3912:2007
Aerospace series. Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting…
-
BS EN 61754-7:2001:2002 Edition
Fibre optic connector interfaces – Type MPO connector family Published By Publication Date Number of…
-
BS EN 13913:2003:2014 Edition
Railway applications. Rubber suspension components. Elastomer-based mechanical parts Published By Publication Date Number of Pages…
-
BS EN 3973:2006 2007
Aerospace series. Steel FE-CM3801 (X5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened. Investment casting. De ≤…
-
BS EN 3903:2017
Aerospace series. Washers, laminated, in corrosion resisting steel Published By Publication Date Number of Pages…
-
BS 5871-4:2007
Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative…
-
BS EN 14080:2013:2014 Edition
Timber structures. Glued laminated timber and glued solid timber. Requirements Published By Publication Date Number…
-
BS EN 2913:2000
Washers, flat, large diameter, in steel, cadmium plated Published By Publication Date Number of Pages…
-
BS EN 60335-2-4:2002 2006
Household and similar electrical appliances. Safety – Particular requirements for spin extractors Published By Publication…
-
BS EN 3916:2008
Aerospace series. Insert, thin wall. Salvage procedure for components Published By Publication Date Number of…
-
BS EN 3613:2009
Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base…
-
BS 7117-1:1991:2003 Edition
Metering pumps and dispensers to be installed at filling stations and used to dispense liquid…
-
BS EN ISO 3613:2001:2002 Edition
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods Published By…
-
BS EN 55016-1-4:2004:2006 Edition
Specification for radio disturbance and immunity measuring apparatus and methods – Radio disturbance and immunity…
-
BS EN 681-2:2000:2006 Edition
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications –…
-
BS 7346-7:2006
Components for smoke and heat control systems – Code of practice on functional recommendations and…
-
BS EN 61174:2001:2002 Edition
Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational…
-
BS EN 3914:2008
Aerospace series. Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,…
-
BS EN 3943:2001
Aerospace series. Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3). Filler metal for brazing. Powder or paste Published…
-
BS EN 3953:2001
Aerospace series. Silver base alloy AG-B12401 (AgCu40Zn5Ni). Filler metal for brazing. Wire Published By Publication…
-
BS EN 913:2008:2009 Edition
Gymnastic equipment. General safety requirements and test methods Published By Publication Date Number of Pages…
-
BS EN 13348:2001:2006 Edition
Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum Published By…
-
BS EN ISO 23913:2009
Water quality. Determination of Chromium(VI). Method using flow analysis (FIA and CFA) and spectrometric detection…
-
BS EN 3933:2001
Aerospace series. Nickel base alloy NI-B13001 (NiP11). Filler metal for brazing. Powder or paste Published…
-
BS 7412:2007
Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles Published…
-
BS EN ISO 2560:2005 2006
Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels.…
-
BS EN 60249-2-5:1994:2001 Edition
Specifications – Specification No 5. Epoxide woven glass fabric copper-clad laminated sheet of defined flammability…
-
BS EN 12916:2000
Methods of test for petroleum and its products. Petroleum products. Determination of aromatic hydrocarbon in…
-
BS EN 60335-2-13:2003+A2:2008
Household and similar electrical appliances. Safety – Particular requirements for deep fat fryers, frying pans…
-
BS 6400-3:2007
Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not…
-
BS EN 3963:2001
Aerospace series. Copper CU-BU9001. Filler metal for brazing. Rolled foil Published By Publication Date Number…
-
BS 7208-3:1992
Contact lenses – Methods of test for contact lenses Published By Publication Date Number of…
-
BS EN 61427:2002
Secondary cells and batteries for solar photovoltaic energy systems. General requirements and methods of test…
