BS EN 4266:2013
$102.76
Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated. Wide series. Dimensions and loads. Inch series
| Published By | Publication Date | Number of Pages |
| BSI | 2013 | 18 |
This European Standard specifies the characteristics of spherical plain bearings, metal to metal, in corrosion resisting steel, cadmium plated and chromated, wide series, inch series for aerospace applications. They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms. They need to be used in the temperature range ? 54 °C to 150 °C, as they are lubricated by means of the following greases: – Code A: Grease as per MIL-PRF-23827C, operating temperature range ? 73 °C to 121 °C; – Code B: Grease as per MIL-PRF-81322G, operating temperature range ? 54 °C to 177 °C. The range of application for bearings lubricated with grease per code A is limited to 121 °C. In both cases the spherical surface of the outer or inner ring needs to be provided with a dry-film lubricant as per MIL-PRF-46010G or equivalent (anti-seizing protection). The slide hole treatment either at the outer ring or inner ring.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 4 | Contents Page |
| 5 | Foreword |
| 6 | 1 Scope 2 Normative references |
| 7 | 3 Terms and definitions 4 Symbols and abbreviations 5 Requirements 5.1 Configuration, dimensions, tolerances and mass 5.2 Surface roughness 5.3 Material |
| 8 | 5.4 Surface treatment 5.5 Loads and clearances |
| 16 | 6 Designation 7 Marking 8 Technical specification |
Related products
-
BS EN 55016-2-3:2017+A2:2023
Specification for radio disturbance and immunity measuring apparatus and methods – Methods of measurement of…
-
BS EN 61951-2:2003
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells…
-
BS EN 55016-2-1:2014+A1:2017:2020 Edition
Specification for radio disturbance and immunity measuring apparatus and methods – Methods of measurement of…
-
BS EN 61675-2:2015
Radionuclide imaging devices. Characteristics and conditions – Gamma cameras for planar, wholebody, and SPECT imaging…
-
BS EN 4166:2003
Aerospace series. Clips, spring tension, three parts. PTFE bushes Published By Publication Date Number of…
-
BS EN 60704-2-14:2013+A11:2015:2016 Edition
Household and similar electrical appliances. Test code for the determination of airborne acoustical noise –…
-
BS EN 2266-008:2015
Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C – DRP…
-
BS EN 55016-2-3:2017:2018 Edition
Specification for radio disturbance and immunity measuring apparatus and methods – Methods of measurement of…
-
BSI 19/30399976 DC:2019 Edition
BS EN ISO 24266. Footwear. Test methods for whole shoe. Flexing durability Published By Publication…
-
BS EN 14266:2003
Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Coating tar.…
-
BSI 19/30406217 DC:2019 Edition
BS EN 2266-008. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C…
-
BS EN 55016-2-1:2009+A2:2013
Specification for radio disturbance and immunity measuring apparatus and methods – Methods of measurement of…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
BS EN 60793-1-54:2003
Optical fibres. Measurement methods and test procedures – Gamma irradiation Published By Publication Date Number…
-
BS EN ISO 4264:2018
Petroleum products. Calculation of cetane index of middle-distillate fuels by the four variable equation Published…
-
BS EN ISO 7396-1:2016+A1:2019
Medical gas pipeline systems – Pipeline systems for compressed medical gases and vacuum Published By…
-
BS EN 55016-2-3:2010+A2:2014
Specification for radio disturbance and immunity measuring apparatus and methods – Methods of measurement of…
-
BS EN 55016-2-3:2017+A1:2019
Specification for radio disturbance and immunity measuring apparatus and methods – Methods of measurement of…
-
BS EN 280-1:2022 – TC
Tracked Changes. Mobile elevating work platforms – Design calculations. Stability criteria. Construction. Safety. Examinations and…
-
BSI 19/30392933 DC:2019 Edition
BS EN 266. Wall coverings in roll form. Specification for textile wall coverings Published By…
-
BS EN 55016-2-1:2014+A1:2017:2018 Edition
Specification for radio disturbance and immunity measuring apparatus and methods – Methods of measurement of…
-
BS EN ISO 4066:2000
Construction drawings. Bar scheduling Published By Publication Date Number of Pages BSI 2000 16
-
BS EN 60704-2-14:2013+A1:2019
Household and similar electrical appliances. Test code for the determination of airborne acoustical noise –…
-
BS EN ISO 4264:2007+A1:2013
Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation Published By…
-
BS EN ISO 7396-1:2016
Medical gas pipeline systems – Pipeline systems for compressed medical gases and vacuum Published By…
-
BS EN 61158-6-2:2014
Industrial communication networks. Fieldbus specifications – Application layer protocol specification. Type 2 elements Published By…
-
BS EN 55016-2-3:2017+A1:2019
Specification for radio disturbance and immunity measuring apparatus and methods – Methods of measurement of…
-
BS EN ISO 3266:2010+A1:2015
Forged steel eyebolts grade 4 for general lifting purposes Published By Publication Date Number of…
-
BS EN ISO 7396-1:2007+A3:2013
Medical gas pipeline systems – Pipeline systems for compressed medical gases and vacuum Published By…
-
BSI 17/30371286 DC:2017 Edition
BS EN 4866. Aerospace series. Definitions of imperfections and defects in organic matrix composite materials…
-
BS EN 4265:2013
Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel. Wide series. Dimensions…
-
BS EN 4262:2013
Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D ≤…
-
BS EN 4268:2012
Aerospace series. Metallic materials. Heat treatment facilities. General requirements Published By Publication Date Number of…
-
ASHRAE Fundamentals Handbook IP 2013
2013 ASHRAE Handbook – Fundamentals – IP Edition Published By Publication Date Number of Pages…
-
BS EN 62305-2:2012:2013 Edition
Protection against lightning – Risk management Published By Publication Date Number of Pages BSI 2013…
-
BS EN 4626-201:2009
Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule.…
-
BS EN ISO 4766:2011
Slotted set screws with flat point Published By Publication Date Number of Pages BSI 2011…
-
BS EN 13463-5:2011:2012 Edition
Non-electrical equipment intended for use in potentially explosive atmospheres – Protection by constructional safety ‘c’…
-
BS EN 4263:2013
Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D ≤…
-
BSI 23/30450346 DC 2023
BS EN ISO 4766. Fasteners. Slotted set screws with flat point Published By Publication Date…
