BS EN ISO 10325:2018
$86.31
Fibre ropes. High modulus polyethylene. 8-strand braided ropes, 12-strand braided ropes and covered ropes
Published By | Publication Date | Number of Pages |
BSI | 2018 | 14 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This document specifies requirements for 8-strand braided ropes, for 12-strand braided ropes, and for covered rope constructions for general purpose made of high modulus polyethylene (HMPE), and gives rules for their designation.
Many different types and grades of HMPE fibre exist which are commonly used to produce rope products. This document does not cover all variations in strength or product performance. The rope manufacturer is consulted to ensure the intended design meets the requirements of the application.
PDF Catalog
PDF Pages | PDF Title |
---|---|
2 | National foreword |
4 | European foreword |
6 | Foreword |
7 | 1 Scope 2 Normative references 3 Terms and definitions 4 Designation fibre ropes |
8 | 5 Material 6 General requirements 6.1 General |
9 | 6.2 Construction, manufacture and lay length or braid pitch 6.3 Labelling, packaging, invoicing and delivered lengths 7 Physical properties 8 Marking |
Status | Confirmed |
---|---|
Pages | 14 |
Publication Date | 2018-10-18 |
ISBN | 978 0 580 90521 6 |
Standard Number | BS EN ISO 10325:2018 |
Title | Fibre ropes. High modulus polyethylene. 8-strand braided ropes, 12-strand braided ropes and covered ropes |
Identical National Standard Of | EN ISO 10325:2018, ISO 10325:2018 |
Replaces | BS EN ISO 10325:2009 |
Descriptors | Linear density, Breaking load, Tex, Polyethylene, Man-made fibre ropes, Braided cords, Marking, Strands, Polyolefin fibres, Ropes, Fibre ropes, Designations |
Publisher | BSI |
Committee | TCI/100 |
ICS Codes | 59.080.50 - Ropes |
Related products
-
BS EN ISO 10225:2021
Gas welding equipment. Marking for equipment used for gas welding, cutting and allied processes Published…
-
BS EN ISO 10326-1:2016:2018 Edition
Mechanical vibration. Laboratory method for evaluating vehicle seat vibration – Basic requirements Published By Publication…
-
BS EN 10346:2009
Continuously hot-dip coated steel flat products. Technical delivery conditions Published By Publication Date Number of…
-
BS EN ISO 10328:2016 – TC:2020 Edition
Tracked Changes. Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods Published By Publication…
-
BS EN ISO 11073-10425:2016
Health informatics. Personal health device communication – Device specialization. Continuous glucose monitor (CGM) Published By…
-
BS EN 10305-3:2010
Steel tubes for precision applications. Technical delivery conditions – Welded cold sized tubes Published By…
-
BS EN ISO 10323:1996
Dental rotary instruments. Bore diameters for discs and wheels Published By Publication Date Number of…
-
BS EN ISO 11073-10425:2019
Health informatics. Personal health device communication – Device specialization. Continuous glucose monitor (CGM) Published By…
-
BS EN ISO 10322-2:2016
Ophthalmic optics. Semi-finished spectacle lens blanks – Specifications for progressive-power and degressive-power lens blanks Published…
-
BSI 17/30346732 DC:2017 Edition
BS EN 10225-4. Weldable structural steels for fixed offshore structures. Technical delivery conditions – Part…
-
BS EN ISO 10321:2008:2009 Edition
Geosynthetics. Tensile test for joints/seams by wide-width strip method Published By Publication Date Number of…
-
BS EN ISO 10322-1:2006
Ophthalmic optics. Semi-finished spectacle lens blanks – Specifications for single-vision and multifocal lens blanks Published…
-
BS EN ISO 10322-2:2006
Ophthalmic optics. Semi-finished spectacle lens blanks – Specifications for progressive power lens blanks Published By…
-
BS ISO 10315:2013:2015 Edition
Cigarettes. Determination of nicotine in smoke condensates. Gas-chromatographic method Published By Publication Date Number of…
-
BS EN ISO 10352:2010:2011 Edition
Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area Published By Publication…
-
BS EN ISO 10325:2018 – TC:2020 Edition
Tracked Changes. Fibre ropes. High modulus polyethylene. 8-strand braided ropes, 12-strand braided ropes and covered…
-
BS EN ISO 11073-10425:2019
Health informatics. Personal health device communication – Device specialization. Continuous glucose monitor (CGM) Published By…
-
BS EN ISO 11073-10425:2019 – TC:2020 Edition
Tracked Changes. Health informatics. Personal health device communication – Device specialization. Continuous glucose monitor (CGM)…
-
BS EN 10025-6:2004+A1:2009
Hot rolled products of structural steels – Technical delivery conditions for flat products of high…
-
BS EN 10305-2:2016
Steel tubes for precision applications. Technical delivery conditions – Welded cold drawn tubes Published By…
-
BS EN 10305-5:2016
Steel tubes for precision applications. Technical delivery – Welded cold sized square and rectangular tubes…
-
BS EN ISO 10320:2019
Geosynthetics. Identification on site Published By Publication Date Number of Pages BSI 2019 10
-
BS EN 10305-2:2010
Steel tubes for precision applications. Technical delivery conditions – Welded cold drawn tubes Published By…
-
BS EN 30326-1:1994+A2:2011:2012 Edition
Mechanical vibration. Laboratory method for evaluating vehicle seat vibration – Basic requirements Published By Publication…
-
BS EN ISO 10352:1997
Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area Published By Publication…
-
BS EN ISO 10322-1:2016
Ophthalmic optics. Semi-finished spectacle lens blanks – Specifications for single-vision and multifocal lens blanks Published…
-
BS EN ISO 10325:2009:2010 Edition
Fibre ropes. High modulus polyethylene. 8-strand braided ropes, 12-strand braided ropes and covered ropes Published…
-
BS EN ISO 10323:2013
Dentistry. Bore diameters for rotary instruments such as discs and wheels Published By Publication Date…
-
BS EN 10305-4:2011
Steel tubes for precision applications. Technical delivery conditions – Seamless cold drawn tubes for hydraulic…
-
BS EN 10225:2009
Weldable structural steels for fixed offshore structures. Technical delivery conditions Published By Publication Date Number…
-
BSI 17/30346741 DC:2017 Edition
BS EN 10225-1. Weldable structural steels for fixed offshore structures. Technical delivery conditions – Part…
-
BS EN 10305-5:2010
Steel tubes for precision applications. Technical delivery conditions – Welded and cold sized square and…
-
BS EN 10305-1:2016
Steel tubes for precision applications. Technical delivery conditions – Seamless cold drawn tubes Published By…
-
BS EN ISO 10328:2016
Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods Published By Publication Date Number…
-
BSI 19/30336188 DC:2019 Edition
BS EN ISO 10352. Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit…
-
BS EN 10305-3:2016
Steel tubes for precision applications. Technical delivery conditions – Welded cold sized tubes Published By…
-
BS EN ISO 10328:2006
Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods Published By Publication Date Number…
-
BS EN ISO 10321:1996
Geotextiles. Tensile test for joints/seams by wide-width method Published By Publication Date Number of Pages…
-
BS EN ISO 10320:2019 – TC:2020 Edition
Tracked Changes. Geosynthetics. Identification on site Published By Publication Date Number of Pages BSI 2020…
-
BS EN 10305-1:2010
Steel tubes for precision applications. Technical delivery conditions – Seamless cold drawn tubes Published By…