BS EN ISO 19630:2021
$102.76
Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for reinforcements. Determination of tensile properties of filaments at ambient temperature
| Published By | Publication Date | Number of Pages |
| BSI | 2021 | 18 |
This document specifies the conditions for the determination of tensile properties of single filaments of ceramic fibre such as tensile strength, Young modulus and fracture strain. The method applies to continuous ceramic filaments taken from tows, yarns, braids and knittings, which have strain to fracture less than or equal to 5 %.
The method does not apply to carbon fibres that exhibit nonlinear stress-strain curve. The method does not apply to checking the homogeneity of strength properties of fibres, nor to assessing the effects of volume under stress. Statistical aspects of filament failure are not included.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 2 | National foreword |
| 4 | European foreword |
| 6 | Foreword |
| 7 | 1 Scope 2 Normative references 3 Terms, definitions and symbols |
| 9 | 4 Principle 5 Apparatus 6 Test specimens 7 Test specimen preparation |
| 11 | 8 Number of test specimens 9 Test procedure 9.1 Displacement rate 9.2 Determination of the gauge length 9.3 Determination of the initial cross-section area 9.4 Testing technique 9.4.1 General 9.4.2 Load cell 9.4.3 Test specimen mounting |
| 12 | 9.4.4 Measurements 9.4.5 Test validity 10 Calculation of results 10.1 Tensile strength 10.1.1 Determination of maximum tensile force 10.1.2 Calculation of tensile strength 10.2 Calculation of the load train compliance, Cl |
| 13 | 10.3 Strain |
| 14 | 10.4 Young modulus 10.5 Fracture strain |
| 15 | 11 Test report |
| 16 | Bibliography |
Related products
-
BS EN ISO 19650-4:2022
Organization and digitization of information about buildings and civil engineering works, including building information modelling…
-
BS EN ISO 14630:2009
Non-active surgical implants. General requirements Published By Publication Date Number of Pages BSI 2009 26
-
BS 3683-1:1985
Glossary of terms used in non-destructive testing – Penetrant flaw detection Published By Publication Date…
-
BS EN ISO 14630:2008
Non-active surgical implants. General requirements Published By Publication Date Number of Pages BSI 2008 22
-
BS EN ISO 80601-2-90:2021
Medical electrical equipment – Particular requirements for basic safety and essential performance of respiratory high-flow…
-
BSI BSENISO19650-2:2018 & Revised NA:2021 Edition
Organization and digitization of information about buildings and civil engineering works, including building information modelling…
-
BS EN ISO 19634:2021
Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Notations and symbols Published By Publication…
-
BS 341-1:1991
Transportable gas container valves – Specification for industrial valves for working pressures up to and…
-
BS EN ISO 19650-3:2020
Organization and digitization of information about buildings and civil engineering works, including building information modelling…
-
BS EN ISO 6507-1:2023
Metallic materials. Vickers hardness test – Test method Published By Publication Date Number of Pages…
-
BS EN ISO 19650-2:2018:2019 Edition
Organization and digitization of information about buildings and civil engineering works, including building information modelling…
-
BS 1192-4:2014
Collaborative production of information – Fulfilling employer’s information exchange requirements using COBie. Code of practice…
-
BS 341-2:1963
Transportable gas container valves – Valves with taper stems for use with breathing apparatus Published…
-
BS 1192-4:2014
Collaborative production of information – Fulfilling employer’s information exchange requirements using COBie. Code of practice…
-
BSI PD CEN/TR 13233:2007:2008 Edition
Advanced technical ceramics. Notations and symbols Published By Publication Date Number of Pages BSI 2008…
-
BS EN ISO 19650-4:2022:2023 Edition
Organization and digitization of information about buildings and civil engineering works, including building information modelling…
-
BSI 23/30439301 DC:2023 Edition
BS EN ISO 19650-6 Organization and digitization of information about buildings and civil engineering works,…
-
BSI PD 19650-0:2019
Transition guidance to BS EN ISO 19650 Published By Publication Date Number of Pages BSI…
-
BS EN 849:1997:2002 Edition
Transportable gas cylinders. Cylinder valves. Specification and type testing Published By Publication Date Number of…
-
BS EN ISO 12209-2:2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air – Threaded connections…
-
BS EN ISO 19650-2:2018
Organization and digitization of information about buildings and civil engineering works, including building information modelling…
-
BS EN ISO 14630:2012
Non-active surgical implants. General requirements Published By Publication Date Number of Pages BSI 2012 26
-
BS EN ISO 19650-4:2022
Organization and digitization of information about buildings and civil engineering works, including building information modelling…
-
BS EN 28510-2:1993:1991 Edition
Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly – 180° peel Published By Publication…
-
BS EN ISO 19650-4:2022 – TC
Tracked Changes. Organization and digitization of information about buildings and civil engineering works, including building…
-
BS EN 13185:2001:2004 Edition
Non-destructive testing. Leak testing. Tracer gas method Published By Publication Date Number of Pages BSI…
-
BS EN ISO 5364:2016 – TC:2020 Edition
Tracked Changes. Anaesthetic and respiratory equipment. Oropharyngeal airways Published By Publication Date Number of Pages…
-
BS EN 10253-2:2007
Butt-welding pipe fittings – Non alloy and ferritic alloy steels with specific inspection requirements Published…
-
BS EN 10002-5:1992
Tensile testing of metallic materials – Method of test at elevated temperatures Published By Publication…
-
BS EN ISO 5467-2:2022
Dentistry. Mobile dental units and dental patient chairs – Air, water, suction and wastewater systems…
-
BS EN ISO 19650-5:2020
Organization and digitization of information about buildings and civil engineering works, including building information modelling…
-
BS EN ISO 12209-1:2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air – Yoke type…
-
BS EN ISO 12951:2015
Textile floor coverings. Determination of mass loss, fibre bind and stair nosing appearance change using…
-
BSI 22/30399894 DC 2022
BS EN ISO 14630. Non-active surgical implants. General requirements Published By Publication Date Number of…
-
BS EN ISO 5467-2:2022
Dentistry. Mobile dental units and dental patient chairs – Air, water, suction and wastewater systems…
-
BS EN 1007-4:2004:2005 Edition
Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements – Determination of tensile properties…
-
BS EN ISO 734:2015 – TC:2020 Edition
Tracked Changes. Oilseed meals. Determination of oil content. Extraction method with hexane (or light petroleum)…
-
BSI PD 19650-0:2019
Transition guidance to BS EN ISO 19650 Published By Publication Date Number of Pages BSI…
-
BS EN ISO 12209-3:2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air – Adaptor for…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
