BS ISO 10550:1994
$86.31
Micrographics. Planetary camera systems. Test target for checking performance
| Published By | Publication Date | Number of Pages |
| BSI | 1994 | 14 |
This International Standard describes a test target for use in checking the performance of planetary camera systems. It specifies methods for
-
checking the performance of the system;
-
monitoring cameras in routine use.
It applies to systems used to produce first-generation microforms that comply with ISO 3272-1, ISO 3272-2, ISO 6199 or ISO 9923.
It does not apply to the production of duplicates or hard copy.
Related products
-
BS EN ISO 10555-1:2009
Sterile, single-use intravascular catheters – General requirements Published By Publication Date Number of Pages BSIā¦
-
BS EN 10250-3:2000
Open steel die forgings for general engineering purposes – Alloy special steels Published By Publicationā¦
-
BS 7008-1:1988
Acquisition and presentation of comparable data for basic properties of plastics. – Method for single-pointā¦
-
BS EN 10250-1:1999
Open steel die forgings for general engineering purposes – General requirements Published By Publication Dateā¦
-
BS EN ISO 10555-3:2013
Intravascular catheters. Sterile and single-use catheters – Central venous catheters Published By Publication Date Numberā¦
-
BS EN ISO 10350:1995
Plastics. Acquisition and presentation of comparable single-point data Published By Publication Date Number of Pagesā¦
-
BS EN ISO 10555-4:2013
Intravascular catheters. Sterile and single-use catheters – Balloon dilatation catheters Published By Publication Date Numberā¦
-
BS A 324:1998
Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425Ā°C, 1100 MPa (at ambientā¦
-
BS 4285-3.15:1993
Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganismsā¦
-
BS EN ISO 10555-1:1997:2006 Edition
Sterile, single-use intravascular catheters – General requirements Published By Publication Date Number of Pages BSIā¦
-
BS EN 10250-4:2000
Open steel die forgings for general engineering purposes – Stainless steels Published By Publication Dateā¦
-
BS EN 60464-1:1999:2006 Edition
Varnishes used for electrical insulation – Definitions and general requirements Published By Publication Date Numberā¦
-
BS 7963:2000
Ergonomics of the thermal environment. Guide to the assessment of heat strain in workers wearingā¦
-
BS EN 10250-1:2022
Open die steel forgings for general engineering purposes – General requirements Published By Publication Dateā¦
-
BS EN 10250-2:2000
Open steel die forgings for general engineering purposes – Non-alloy quality and special steels Publishedā¦
-
BS EN ISO 10350-1:2001
Plastics. Acquisition and presentation of comparable single-point data – Moulding materials Published By Publication Dateā¦
-
BS AU 50-1.5.6:1994
Tyres and wheels. Tyres. Industrial vehicle tyres – Specification for cylindrical and conical base rubberā¦
-
BS 7174-2:1990
Determination of hydraulic fluid power motor characteristics – Specification for angiographic catheters Published By Publicationā¦
-
BS EN 1055:1996
Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test methodā¦
-
BS EN ISO 10590:2005
Building construction. Sealants. Determination of tensile properties of sealants at maintained extension after immersion inā¦
-
BS EN ISO 10551:2001:2002 Edition
Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjectiveā¦
-
BS A 359:2000
Nuts, barrel, self-locking, floating, with MJ threads, classifications. 900 MPa (at ambient temperature)/235Ā°C, 1100 MPaā¦
-
BS ISO/IEC 9594-8:1990:1991 Edition
Information technology. Open systems interconnection – Authentication framework Published By Publication Date Number of Pagesā¦
-
BS EN ISO 660:2000 2005
Animal and vegetable fats and oils. Determination of acid value and acidity Published By Publicationā¦
-
BS EN ISO 10555-5:1997:2003 Edition
Sterile, single-use intravascular catheters – Over-needle peripheral catheters Published By Publication Date Number of Pagesā¦
-
BS ISO 10570:2004:2016 Edition
Earth-moving machinery. Articulated frame lock. Performance requirements Published By Publication Date Number of Pages BSIā¦
-
BS A 327:1998
Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425Ā°C, 1100ā¦
-
BS EN ISO 10555-1:2013+A1:2017:2018 Edition
Intravascular catheters. Sterile and single-use catheters – General requirements Published By Publication Date Number ofā¦
-
BS A 316:1997
Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications. 600 MPaā¦
-
BS EN ISO 10555-2:1997:2003 Edition
Sterile, single-use intravascular catheters – Angiographic catheters Published By Publication Date Number of Pages BSIā¦
-
BS EN ISO 10555-3:1997:2003 Edition
Sterile, single-use intravascular catheters – Central venous catheters Published By Publication Date Number of Pagesā¦
-
BS 7174-3:1990
Sterile intravascular catheters and ancillary devices for single use – Specification for central venous cathetersā¦
-
BS EN ISO 10510:2000
Tapping screw and washer assemblies with plain washers Published By Publication Date Number of Pagesā¦
-
BS 7174-5:1990
Sterile intravascular catheters and ancillary devices for single use – Specification for balloon dilatation cathetersā¦
-
BS A 317:1997
Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications. 600 MPa (atā¦
-
BS ISO 10551:1995
Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjectiveā¦
-
BS EN ISO 10555-5:2013
Intravascular catheters. Sterile and single-use catheters – Over-needle peripheral catheters Published By Publication Date Numberā¦
-
BS EN ISO 10555-4:1997:2003 Edition
Sterile, single-use intravascular catheters – Balloon dilatation catheters Published By Publication Date Number of Pagesā¦
-
BS EN ISO 10590:1998:1995 Edition
Building construction. Sealants. Determination of adhesion/cohesion properties at maintained extension after immersion in water Publishedā¦
-
BS ISO/IEC 15050:1997
Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol.ā¦
