BS ISO 10792-3:1995:1996 Edition
$142.49
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner – Technical specification
| Published By | Publication Date | Number of Pages |
| BSI | 1996 | 30 |
This part of ISO 10792 gives a technical specification (required characteristics, the methods for checks and tests, the quality assurance, and the qualification, reception and delivery conditions) for spherical plain bearings in corrosion-resisting steel, with self-lubricating liner, designed to be subjected under load to slow rotations and low-strain oscillatory motion only.
It is applicable to spherical plain bearings consisting of two concentric rings between which is interposed a self-lubricating liner which is bonded to the spherical surface of the outer ring, when reference is made to it in the relevant product standards or in a defining document.
Specifies characteristics, methods for checks and tests, quality assurance, qualification, reception and delivery conditions.
Related products
-
BS ISO 10792-2:1995:1996 Edition
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner – Inch series Published…
-
BS ISO 10791-1:2015
Test conditions for machining centres – Geometric tests for machines with horizontal spindle (horizontal Z-axis)…
-
BS ISO 10972-1:1998
Cranes. Requirements for mechanisms – General Published By Publication Date Number of Pages BSI 1998…
-
BS ISO 10392:2011
Road vehicles. Determination of centre of gravity Published By Publication Date Number of Pages BSI…
-
BS ISO 10791-4:1998
Test conditions for machining centres – Accuracy and repeatability of positioning of linear and rotary…
-
BS ISO/IEC 10742:1994:1995 Edition
Information technology. Telecommunications and information exchange between systems. Elements of management information related to OSI…
-
BS EN ISO 7539-2:1995
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of bent-beam specimens…
-
BS ISO 10790:2015
Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of…
-
BS ISO 10791-6:1998:2004 Edition
Test conditions for machining centres – Accuracy of feeds, speeds and interpolations Published By Publication…
-
BS 7787:1994
Method for evaluation of the performance of coal sizing equipment Published By Publication Date Number…
-
BS EN ISO 10712:1996
Water quality. Pseudomonas putida growth inhibition test (Pseudomonas cell multiplication inhibition test) Published By Publication…
-
BS ISO 10790:1999:2004 Edition
Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of…
-
BSI DD ENV ISO 10722-1:1998
Geotextiles and geotextile-related products. Procedure for simulating damage during installation. – Installation in granular materials…
-
BS ISO 10791-1:1998:1999 Edition
Test conditions for machining centres – Geometric tests for machines with horizontal spindle and with…
-
BS EN 1092-2:1997
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated –…
-
BS EN ISO 15792-3:2008
Welding consumables. Test methods – Classification testing of positional capacity and root penetration of welding…
-
BS 6200-3.12.2:1985
Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of…
-
BS ISO 10791-3:1998:1999 Edition
Test conditions for machining centres – Geometric tests for machines with integral indexable or continuous…
-
BS ISO/IEC 10732:1993
Information technology. Use of X.25 packet layer protocol to provide the OSI connection-mode network service…
-
BS ISO 10792-1:1995:1996 Edition
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner – Metric series Published…
-
BS 4656-30:1992
Accuracy of machine tools and methods of test – Specification for machining centres and computer…
-
BS EN ISO 1042:2000
Laboratory glassware. One-mark volumetric flasks Published By Publication Date Number of Pages BSI 2000 18
-
BS EN ISO 15792-1:2008+A1:2011
Welding consumables. Test methods – Test methods for all-weld metal test specimens in steel, nickel…
-
BS 1016-12:1980
Methods for analysis and testing of coal and coke – Caking and swelling properties of…
-
BS ISO 10752:2019
Coal sizing equipment. Performance evaluation Published By Publication Date Number of Pages BSI 2019 48
-
BS ISO 10791-7:1998
Test conditions for machining centres – Accuracy of a finished test piece Published By Publication…
-
BS EN 1597-2:1997
Welding consumables. Test methods – Preparation of test piece for single-run and two-run technique test…
-
BS ISO 10791-5:1998
Test conditions for machining centres – Accuracy and repeatability of positioning of work-holding pallets Published…
-
BS EN ISO 10722:2007:2009 Edition
Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused…
-
BS AU 246:1992
Method for determination of the centre of gravity of road vehicles with two axles Published…
-
BS MA 85:1979
Specification for shipbuilding – filling connection for drinking water tanks on ships Published By Publication…
-
BS ISO 10791-6:2014:2015 Edition
Test conditions for machining centres – Accuracy of speeds and interpolations Published By Publication Date…
-
BS ISO/IEC 10729-1:1993
Information technology. Open Systems Interconnection. Conformance test suite for the presentation layer – Test suite…
-
BS ISO/IEC 7480:1991:1992 Edition
Information technology. Telecommunications and information exchange between systems. Start-stop transmission signal quality at DTE/DCE interfaces…
-
BS 1016-107.2:1991
Methods for analysis and testing of coal and coke. Caking and swelling properties of coal…
-
BS ISO 12240-3:1998
Spherical plain bearings – Thrust spherical plain bearings Published By Publication Date Number of Pages…
-
BS ISO/IEC 10729-2:1995
Information technology. Open Systems Interconnection. Conformance test suite for the presentation layer – Test suite…
-
BS 5478-1:1977
Specification for calculators and adding machines. – Numeric section of ten-key keyboards for calculators and…
-
BS ISO 10791-7:2014
Test conditions for machining centres – Accuracy of finished test pieces Published By Publication Date…
-
BS EN ISO 15792-2:2008
Welding consumables. Test methods – Preparation of single-run and two-run technique test specimens in steel…
