BS ISO 12653-1:2000:2001 Edition
$86.31
Electronic imaging. Test target for the black-and-white scanning of office documents – Characteristics
Published By | Publication Date | Number of Pages |
BSI | 2001 | 14 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This part of ISO 12653 specifies a test target for use in assessing the consistency of quality of performance over time of flat-bed and rotary black-and-white reflection scanners used in electronic image management systems. The test target is designed:
-
to allow routine checks of the system’s performance;
-
to establish the performance limits of the system.
This part of ISO 12653 is applicable to assessing the output quality of black-and-white scanners used for black-and-white or colour office documents, with or without half-tone or colour.
It is not applicable to colour scanners or scanners used for the scanning of transparent or translucent documents.
NOTE Additional targets for assessing the output quality of black-and-white scanners using continuous tone and colour are referred to in ISO 12653-2.
Status | Confirmed |
---|---|
Pages | 14 |
Publication Date | 2001-05-15 |
ISBN | 0 580 37374 6 |
Standard Number | BS ISO 12653-1:2000 |
Title | Electronic imaging. Test target for the black-and-white scanning of office documents – Characteristics |
Identical National Standard Of | ISO 12653-1:2000 |
Descriptors | Documents, Records (documents), White, Performance, Quality, Black, Data representation, Optical scanners, Performance testing |
Publisher | BSI |
Committee | IDT/1 |
ICS Codes | 37.080 - Document imaging applications |
Related products
-
BS EN ISO 21535:2007:2008 Edition
Non-active surgical implants. Joint replacement implants. Specific requirements for hip-joint replacement implants Published By Publication…
-
BS ISO 12353-2:2003
Road vehicles. Traffic accident analysis – Guidelines for the use of impact severity measures Published…
-
BS ISO 12643-5:2010:2011 Edition
Graphic technology. Safety requirements for graphic technology equipment and systems – Stand-alone platen presses Published…
-
BS ISO 12353-1:2002
Road vehicles. Traffic accident analysis – Vocabulary Published By Publication Date Number of Pages BSI…
-
BS ISO 16253:2007
Watch-cases and accessories. Vapour phase deposited coatings Published By Publication Date Number of Pages BSI…
-
BS EN ISO 12643-4:2023
Graphic technology. Safety requirements for graphic technology equipment and systems – Converting equipment and systems…
-
BS EN ISO 12643-2:2023
Graphic technology. Safety requirements for graphic technology equipment and systems – Prepress and press equipment…
-
BS EN 1010-3:2002+A1:2009:2010 Edition
Safety of machinery. Safety requirements for the design and construction of printing and paper converting…
-
BS ISO 12643-2:2007
Graphic technology. Safety requirements for graphic technology equipment and systems – Press equipment and systems…
-
BS EN ISO 15653:2018
Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds Published…
-
BSI 20/30414619 DC:2020 Edition
BS ISO 16653-2. Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative…
-
BS EN 12826:2000:2004 Edition
Footwear. Test methods for lining and insocks. Static friction Published By Publication Date Number of…
-
BS EN ISO 22653:2018
Footwear. Test methods for lining and insocks. Static friction Published By Publication Date Number of…
-
BS EN ISO 17653:2012
Resistance welding. Destructive tests on welds in metallic materials. Torsion test of resistance spot welds…
-
BS EN ISO 15653:2010
Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds Published…
-
BS ISO 12643-3:2008:2009 Edition
Graphic technology. Safety requirements for graphic technology equipment and systems – Binding and finishing equipment…
-
BS ISO 12635:1996
Graphic technology. Plates for offset printing. Dimensions Published By Publication Date Number of Pages BSI…
-
BS ISO 12648:2006
Graphic technology. Safety requirements for printing press systems Published By Publication Date Number of Pages…
-
BS EN 1010-4:2004+A1:2009:2010 Edition
Safety of machinery. Safety requirements for the design and construction of printing and paper converting…
-
BS ISO 18653:2003
Gears. Evaluation of instruments for the measurement of individual gears Published By Publication Date Number…
-
BS ISO 12643-4:2010
Graphic technology. Safety requirements for graphic technology equipment and systems – Converting equipment and systems…
-
BS ISO 12643-1:2009:2010 Edition
Graphic technology. Safety requirements for graphic technology equipment and systems – General requirements Published By…
-
BS ISO 12651:1999:2000 Edition
Electronic imaging. Vocabulary Published By Publication Date Number of Pages BSI 2000 34
-
BS EN ISO 12683:2004
Mechanically deposited coatings of zinc. Specification and test methods Published By Publication Date Number of…
-
BS ISO 12643-3:2010:2011 Edition
Graphic technology. Safety requirements for graphic technology equipment and systems – Binding and finishing equipment…
-
BS ISO 12643-1:2007
Graphic technology. Safety requirements for graphic technology equipment and systems – General requirements Published By…
-
BS EN ISO 12643-5:2023
Graphic technology. Safety requirements for graphic technology equipment and systems – Manually-fed stand-alone platen presses…
-
BS EN ISO 1265:1997
Plastics. Polyvinyl chloride resins. Determination of number of impurities and foreign particles Published By Publication…
-
BS ISO 16653-1:2008
Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features…
-
BS ISO 12635:2021
Graphic technology. Plates for offset printing. Dimensions Published By Publication Date Number of Pages BSI…
-
BS ISO 12635:2008:2009 Edition
Graphic technology. Plates for offset printing. Dimensions Published By Publication Date Number of Pages BSI…
-
BS EN ISO 1265:2007
Plastics. Poly(vinyl chloride) resins. Determination of number of impurities and foreign particles Published By Publication…
-
BS ISO 16253:2017
Watch-cases and accessories. Vapour phase deposited coatings Published By Publication Date Number of Pages BSI…
-
BS EN ISO 12643-3:2023
Graphic technology. Safety requirements for graphic technology equipment and systems – Binding and finishing equipment…
-
BS ISO 12656:2001
Micrographics. Use of bar codes on aperture cards Published By Publication Date Number of Pages…
-
BS ISO 12649:2004:2006 Edition
Graphic technology. Safety requirements for binding and finishing systems and equipment Published By Publication Date…
-
BS ISO 12653-2:2000:2002 Edition
Electronic imaging. Test target for the black-and-white scanning of office documents – Method of use…
-
BS ISO 12353-1:2020
Road vehicles. Traffic accident analysis – Vocabulary Published By Publication Date Number of Pages BSI…
-
BS EN ISO 17653:2003
Destructive tests on welds in metallic materials. Torsion test of resistance spot welds Published By…
-
BS ISO 12643-2:2010:2011 Edition
Graphic technology. Safety requirements for graphic technology equipment and systems – Prepress and press equipment…