BS ISO 14281:2002
$86.31
Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series
| Published By | Publication Date | Number of Pages |
| BSI | 2002 | 14 |
This International Standard specifies the dimensions of metric gauges which check internal cruciform drives, ribbed or unribbed, used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm.
The internal cruciform drives, ribbed and unribbed, are defined respectively in ISO 12256 and ISO 14279.
Related products
-
BS EN ISO 4545-2:2017:2018 Edition
Metallic materials. Knoop hardness test – Verification and calibration of testing machines Published By Publicationā¦
-
BS ISO 14280:2002
Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series Published By Publicationā¦
-
BS ISO 14279:2002
Aerospace. Drives, internal, cruciform. Metric series Published By Publication Date Number of Pages BSI 2002ā¦
-
BS EN ISO 14284:2002
Steel and iron. Sampling and preparation of samples for the determination of chemical composition Publishedā¦
-
BS 6200-3.28.1:1985
Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination ofā¦
-
BS ISO 17281:2018 – TC:2020 Edition
Tracked Changes. Plastics. Determination of fracture toughness (GIC and KIC) at moderately high loading ratesā¦
-
BS ISO 14289-1:2012
Document management applications. Electronic document file format enhancement for accessibility – Use of ISO 32000-1ā¦
-
BSI 20/30402687 DC 2020
BS EN ISO 14287. Plain bearings. Pad materials for tilting pad bearings Published By Publicationā¦
-
BS ISO 14289-1:2014:2015 Edition
Document management applications. Electronic document file format enhancement for accessibility – Use of ISO 32000-1ā¦
-
BS EN 1481:1996
EDI. Message. Tender (CONTEN) Published By Publication Date Number of Pages BSI 1996 20
-
BS EN ISO 14284:2022
Steel and iron. Sampling and preparation of samples for the determination of chemical composition Publishedā¦
-
BS ISO 4659:2003
Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure Published By Publicationā¦
-
BS EN 14218:2003
Hexagon nuts with flange. Fine pitch thread Published By Publication Date Number of Pages BSIā¦
-
BS EN ISO 14271:2001:2002 Edition
Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) Publishedā¦
-
BS EN ISO 5356-1:2004
Anaesthetic and respiratory equipment. Conical connectors – Cones and sockets Published By Publication Date Numberā¦
-
BS EN ISO 22526-3:2021:2022 Edition
Plastics. Carbon and environmental footprint of biobased plastics – Process carbon footprint, requirements and guidelinesā¦
-
BS EN ISO 14881:2005
Integrated optics. Interfaces. Parameters relevant to coupling properties Published By Publication Date Number of Pagesā¦
-
BS EN ISO 11607-2:2020+A1:2023
Packaging for terminally sterilized medical devices – Validation requirements for forming, sealing and assembly processesā¦
-
BS EN ISO 14271:2011:2012 Edition
Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam weldsā¦
-
BS A 361:2000
Rivets, solid, 100Ā° normal countersunk head, in metallic material, with or without surface treatment. Dimensionsā¦
-
BS ISO 17281:2002
Plastics. Determination of fracture toughness (Gic and Kic) at moderately high loading rates (1 m/s)ā¦
-
BS EN ISO 17230:2011
Leather. Physical and mechanical tests. Determination of water penetration pressure Published By Publication Date Numberā¦
-
BS ISO 2782-2:2018 – TC:2020 Edition
Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of permeability to gases – Equal-pressure method Publishedā¦
-
BS ISO/IEC 24714:2023
Biometrics. Cross-jurisdictional and societal aspects of biometrics. General guidance Published By Publication Date Number ofā¦
-
BS ISO 14881:2001
Integrated optics. Interfaces. Parameters relevant to coupling properties Published By Publication Date Number of Pagesā¦
-
BS ISO 14291:2012
Vacuum gauges. Definitions and specifications for quadrupole mass spectrometers Published By Publication Date Number ofā¦
-
BS EN ISO 5356-2:2007
Anaesthetic and respiratory equipment. Conical connectors – Screw-threaded weight-bearing connectors Published By Publication Date Numberā¦
-
BS EN 14289:2003:2004 Edition
Leather. Physical and mechanical tests. Determination of water penetration pressure Published By Publication Date Numberā¦
-
BS EN 14288:2003:2004 Edition
Leather. Physical and mechanical tests. Determination of fogging characteristics Published By Publication Date Number ofā¦
-
BS EN 14781:2005:2006 Edition
Racing bicycles. Safety requirements and test methods Published By Publication Date Number of Pages BSIā¦
-
BS EN ISO 17071:2011
Leather. Physical and mechanical tests. Determination of fogging characteristics Published By Publication Date Number ofā¦
-
BS ISO 24281:2021:2022 Edition
Textiles. Biaxial tensile properties of woven fabric. Determination of maximum force and elongation at maximumā¦
-
BS EN 1281-2:1996
Anaesthetic and respiratory equipment. Conical connectors – Screw-threaded, weight-bearing connectors Published By Publication Date Numberā¦
-
BS ISO 14287:2021
Plain bearings. Pad materials for tilting pad bearings Published By Publication Date Number of Pagesā¦
-
BSI 20/30354221 DC:2020 Edition
BS EN ISO 14881. Integrated optics. Interfaces. Parameters relevant to coupling properties Published By Publicationā¦
-
BS EN ISO 14881:2021
Integrated optics. Interfaces. Parameters relevant to coupling properties Published By Publication Date Number of Pagesā¦
-
BS EN ISO 9241-20:2021
Ergonomics of human-system interaction – An ergonomic approach to accessibility within the ISO 9241 seriesā¦
-
BS 5766-22:2001
Methods for analysis of animal feeding stuffs – Determination of residues of organochlorine pesticides. Gasā¦
-
BS EN ISO 14284:2022 – TC
Tracked Changes. Steel and iron. Sampling and preparation of samples for the determination of chemicalā¦
-
BS ISO 17281:2018
Plastics. Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)ā¦
