BS L 173:1991
$86.31
Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)
Published By | Publication Date | Number of Pages |
BSI | 1991 | 8 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This British Standard specifies the inspection and testing procedure, chemical composition, heat treatment and mechanical properties for chill castings of aluminium-silicon-magnesium alloy in an overaged (stabilized) condition.
Inspection and testing procedure, chemical composition, heat treatment and mechanical properties for alloys in an overaged (stabilized) condition.
Status | Under Review |
---|---|
Pages | 8 |
Publication Date | 1991-04-30 |
ISBN | 0 580 19390 X |
Standard Number | BS L 173:1991 |
Title | Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition) |
Descriptors | Aluminium alloys, Elongation, Silicon-containing alloys, Chill casting, Air transport engineering, Space technology, Hardness, Castings, Tensile strength, Heat treatment, Proof stress, Magnesium-containing alloys, Chemical composition |
Publisher | BSI |
Committee | ACE/61/-/24 |
ICS Codes | 49.025.20 - Aluminium |
Related products
-
BS EN 840-4:2004
Mobile waste containers – Containers with 4 wheels with capacity up to 1 700 l…
-
BS 7121-5:2019 – TC
Tracked Changes. Code of practice for safe use of cranes – Tower cranes Published By…
-
BS EN ISO 4037-1:2021
Radiological protection. X and gamma reference radiation for calibrating dosemeters and doserate meters and for…
-
BS L 113:1971
Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for…
-
BS 2L 116:1985
Specification for tube of 99% aluminium (cold drawn: seamless, not tested hydraulically) (not exceeding 12…
-
BS EN 13007:2000
Steel drums. Non-removable head (tight head) drums with a nominal capacity of 20 l to…
-
BS G 198-5:1997:2005 Edition
Sleeves and moulded components for aircraft electric cables and equipment wires – Specification for heat…
-
BS EN 840-2:2004
Mobile waste containers – Containers with 4 wheels with capacity up to 1 300 l…
-
BS 6618:1985
Specification for photographic grade potassium sulphite, 650 g/L aqueous solution Published By Publication Date Number…
-
BSI PAS 9980:2022
Fire risk appraisal of external wall construction and cladding of existing blocks of flats. Code…
-
BS EN ISO 11120:2015
Gas cylinders. Refillable seamless steel tubes of water capacity between 150 l and 3000 l.…
-
BS 7181:1989:1990 Edition
Specification for storage cisterns up to 500 L actual capacity for water supply for domestic…
-
BS EN 840-4:1997
Mobile waste containers – Containers with four wheels with a capacity from 750 l to…
-
BS L 174:1991
Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an…
-
BS ISO 5990:1996:1997 Edition
Photography. Processing chemicals. Specifications for potassium sulfite, 650 g/l aqueous solution Published By Publication Date…
-
BS EN 840-1:2004
Mobile waste containers – Containers with 2 wheels with a capacity up to 400 l…
-
BS ISO 5507:2002
Oilseeds, vegetable oils and fats. Nomenclature Published By Publication Date Number of Pages BSI 2002…
-
BS EN 209:2000
Steel drums. Removable head (open head) drums with a minimum total capacity of 210 l…
-
BS EN ISO 23088:2020 2021
Gas cylinders. Periodic inspection and testing of welded steel pressure drums. Capacities up to 1…
-
BS L 170:1989:1990 Edition
Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially…
-
BS EN 840-2:1997
Mobile waste containers – Containers with four wheels with a capacity from 500 l to…
-
IEEE 896.1-1991
IEEE Standard for Futurebus+(R) — Logical Protocol Specification Published By Publication Date Number of Pages…
-
BS L 103:1971
Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room…
-
BS EN 4007:2005 2010
Aerospace series. Aluminium alloy AL-P6082-T6 or T62. Sheet and strip. 0,4 mm 3L a 3L…
-
BS EN 840-3:1997
Mobile waste containers – Containers with four wheels with a capacity from 770 l to…
-
BS EN 840-3:2004
Mobile waste containers – Containers with 4 wheels with capacity up to 1 300 l…
-
BS EN ISO 6465:2009
Spices. Cumin (Cuminum cyminum L.). Specification Published By Publication Date Number of Pages BSI 2009…
-
BS EN ISO 7083:2021 – TC
Tracked Changes. Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions Published…
-
BS ISO 11023:1999:2001 Edition
Liquorice extracts (Glycyrrhiza glabra L.). Determination of glycyrrhizic acid content. Methods using high-performance liquid chromatography…
-
BS 5975:2019 – TC
Tracked Changes. Code of practice for temporary works procedures and the permissible stress design of…
-
BS EN 60155:1995:2007 Edition
Glow-starters for fluorescent lamps Published By Publication Date Number of Pages BSI 2007 28
-
BS 5975:2019
Code of practice for temporary works procedures and the permissible stress design of falsework Published…
-
BS L 172:1989:1990 Edition
Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings…
-
BS EN 61221:2004
Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications Published By…
-
BSI PD 6687-2:2008
Recommendations for the design of structures to BS EN 1992-2:2005 Published By Publication Date Number…
-
BS L 163:1978:2002 Edition
Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening…
-
BS EN 840-1:1997
Mobile waste containers – Containers with two wheels with a capacity from 80 l to…
-
BS 4213:2004
Cisterns for domestic use. Cold water storage and combined feed and expansion (thermoplastic) cisterns up…
-
BS 5975:2008+A1:2011
Code of practice for temporary works procedures and the permissible stress design of falsework Published…
-
BS L 171:1990
Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not…