DIN EN 1253-5:2017 Edition
$17.55
Abläufe für Gebäude – Teil 5: Abläufe mit Leichtflüssigkeitssperre
| Published By | Publication Date | Number of Pages |
| DIN | 2017-05 | 11 |
Diese Europäische Norm legt Anforderungen für Ausführung, Konstruktion, Funktion, Anwendung und Kennzeichnung sowie Prüfverfahren für werkmäßig hergestellte Abläufe mit Leichtflüssigkeitssperre für Gebäude fest.*Inhaltsverzeichnis
Related products
-
DIN EN 124-6:2015 Edition
Gully tops and manhole tops for vehicular and pedestrian areas – Part 6: Gully tops…
-
DIN EN 1253-6:2020 Edition
Gullies for buildings – Part 6: Trapped floor gullies with a depth of water seal…
-
DIN EN 1254-1:2021 Edition
Kupfer und Kupferlegierungen – Fittings – Teil 1: Kapillarlötfittings für Kupferrohre (Weich- und Hartlöten) Published…
-
BSI 20/30406131 DC:2020 Edition
BS EN ISO 15253. Ophthalmic optics and instruments. Optical and electro-optical devices for enhancing low…
-
DIN EN 308:2020 Edition
Heat exchangers – Test procedures for establishing performance of air to air and flue gases…
-
DIN EN 1253-7:2020 Edition
Gullies for buildings – Part 7: Trapped floor gullies with mechanical closure (Draft) Published By…
-
VDI 3803 Part 2:2019 Edition
Ventilation and air-conditioning – Structural and technical principles – Decentralized ventilation units (VDI Ventilation Code…
-
DIN EN 1253-2:2015 Edition
Gullies for buildings – Part 2: Roof drains and floor gullies without trap Published By…
-
DIN EN 1254-4:2021 Edition
Kupfer und Kupferlegierungen – Fittings – Teil 4: Gewindefittings Published By Publication Date Number of…
-
BS EN 10228-3:2016
Non-destructive testing of steel forgings – Ultrasonic testing of ferritic or martensitic steel forgings Published…
-
DIN EN 1253-4:2016 Edition
Gullies for buildings – Part 4: Access covers Published By Publication Date Number of Pages…
-
DIN EN 13053:2020 Edition
Lüftung von Gebäuden – Zentrale raumlufttechnische Geräte – Leistungskenndaten für Geräte, Komponenten und Baueinheiten Published…
-
BS EN 10250-1:2022
Open die steel forgings for general engineering purposes – General requirements Published By Publication Date…
-
ISO 2719:2016
Détermination du point d’éclair — Méthode Pensky-Martens en vase clos Published By Publication Date Number…
-
DIN EN 1254-7:2021 Edition
Copper and copper alloys – Plumbing fittings – Part 7: Press fittings for use with…
-
DIN EN 1253-3:2016 Edition
Abläufe für Gebäude – Teil 3: Bewertung der Konformität Published By Publication Date Number of…
-
BS EN 1559-5:2017 – TC:2020 Edition
Tracked Changes. Founding. Technical conditions of delivery – Additional requirements for magnesium alloy castings Published…
-
DIN EN 124-3:2015 Edition
Gully tops and manhole tops for vehicular and pedestrian areas – Part 3: Gully tops…
-
DIN EN 124-2:2015 Edition
Gully tops and manhole tops for vehicular and pedestrian areas – Part 2: Gully tops…
-
BSI 20/30402975 DC 2020
BS EN ISO 12543-3. Glass in building. Laminated glass and laminated safety glass – Part…
-
DIN EN 1253-1:2015 Edition
Gullies for buildings – Part 1: Trapped floor gullies with a depth water seal of…
-
DIN EN 12953-5:2020 Edition
Großwasserraumkessel – Teil 5: Prüfung während der Herstellung, Dokumentation und Kennzeichnung für drucktragende Kesselteile Published…
-
BSI 20/30402983 DC 2020
BS EN ISO 12543-5. Glass in building. Laminated glass and laminated safety glass – Part…
-
DIN EN ISO 14825:2011 Edition
Intelligent transport systems – Geographic Data Files (GDF) – GDF5.0 Published By Publication Date Number…
-
DIN EN ISO 14253-5:2016 Edition
Geometrische Produktspezifikation (GPS) – Prüfung von Werkstücken und Messgeräten durch Messen – Teil 5: Unsicherheit…
-
BS EN 10250-1:2022 – TC
Tracked Changes. Open die steel forgings for general engineering purposes – General requirements Published By…
-
DIN EN 1254-2:2021 Edition
Copper and copper alloys – Plumbing fittings – Part 2: Compression fittings for use with…
-
BSI 20/30402955 DC 2020
BS EN ISO 12543-1. Glass in building. Laminated glass and laminated safety glass – Part…
-
DIN EN 124-4:2015 Edition
Gully tops and manhole tops for vehicular and pedestrian areas – Part 4: Gully tops…
-
BSI 20/30402979 DC 2020
BS EN ISO 12543-4. Glass in building. Laminated glass and laminated safety glass – Part…
-
BSI 22/30439221 DC:2022 Edition
BS EN ISO 12153. Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded…
-
DIN EN ISO 12543-5:2022 Edition
Glas im Bauwesen – Verbundglas und Verbund-Sicherheitsglas – Teil 5: Maße und Kantenbearbeitung Published By…
-
BSI 20/30402987 DC 2020
BS EN ISO 12543-6. Glass in building. Laminated glass and laminated safety glass – Part…
-
DIN EN 1253-8:2020 Edition
Gullies for buildings – Part 8: Trapped floor gullies with combined mechanical closure and water…
-
VDI 3803 Blatt 2:2019 Edition
Raumlufttechnik – Bauliche und technische Anforderungen – Dezentrale RLT-Geräte (VDI-Lüftungsregeln) Published By Publication Date Number…
-
DIN EN 1254-8:2021 Edition
Kupfer und Kupferlegierungen – Fittings – Teil 8: Pressfittings für den Einsatz mit Kunststoff- und…
-
BS EN 1559-5:2017
Founding. Technical conditions of delivery – Additional requirements for magnesium alloy castings Published By Publication…
-
DIN EN 1254-5:2021 Edition
Copper and copper alloys – Plumbing fittings – Part 5: Capillary fittings with short ends…
-
DIN EN 124-1:2015 Edition
Gully tops and manhole tops for vehicular and pedestrian areas – Part 1: Definitions, classification,…
-
DIN EN 124-5:2015 Edition
Gully tops and manhole tops for vehicular and pedestrian areas – Part 5: Gully tops…
