DIN EN 12920:2008 Edition
$26.65
Characterization of waste – Methodology for the determination of the leaching behaviour of waste under specified conditions
Published By | Publication Date | Number of Pages |
DIN | 2008-12 | 14 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This document specifies a methodology for the determination of the leaching behaviour of a waste under specified conditions (i. e. for a specified scenario including a specified time frame) in order to provide a solution to a defined problem. This applies to disposal and utilisation scenarios. The external conditions which have a direct influence on the release of constituents from a waste are considered. Migration of constituents leached from the disposal or the utilisation site into the surrounding environment is not considered. Also the assessment of toxicity to humans or ecological impacts on flora and fauna as a secondary effect after release of constituents from the waste is not considered. Present knowledge of highly complex scenarios and wastes may limit the ability to provide a clear solution to a defined problem. An example may be the landfilling of complex mixtures of wastes.
Published Code | DIN |
---|---|
Published By | Deutsches Institut für Normung |
Publication Date | 2008-12 |
Pages Count | 14 |
Language | Germany |
Descriptors | Characterisations, Chemical analysis and testing, Declarations, Definitions, Deposit, Eluatability, Eluate, Examination of sludge, Extracting behaviour, Granular, Inorganic materials, Lixiviation, Methodologies, Methods, Particulate materials, Process charts, Protection of water resources, Sediment, Sludge, Solubility, Solutes, Test reports, Testing, Tipping (waste), Waste dumps, Wastes, Water pollution, Water practice, Water solubility, Water testing, Water-polluting substances |
File Size | 266.2 KB |
ICS Codes | 13.030.01 - Wastes in general |
Related products
-
ISO 4263-2:2003
Pétrole et produits connexes — Détermination du comportement au vieillissement des fluides et huiles inhibées…
-
BSI 20/30398209 DC 2020
BS EN ISO 21920-1. Geometrical product specifications (GPS). Surface texture: Profile – Part 1. Indication…
-
DIN EN 15920:2011 Edition
Düngemittel – Extraktion des in 2%iger Citronensäure löslichen Phosphors Published By Publication Date Number of…
-
DIN EN 12420:2014 Edition
Kupfer und Kupferlegierungen – Schmiedestücke Published By Publication Date Number of Pages DIN 2014-09 55
-
BS EN 12921-1:2005+A1:2010
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Common…
-
DIN EN 12720:2014 Edition
Furniture – Assessment of surface resistance to cold liquids Published By Publication Date Number of…
-
ISO 20763:2004
Pétrole et produits connexes — Détermination des propriétés anti-usure des fluides hydrauliques — Méthode de…
-
DIN EN 12921-4:2010 Edition
Maschinen zur Oberflächenreinigung und -vorbehandlung von industriellen Produkten mittels Flüssigkeiten oder Dampfphasen – Teil 4:…
-
DIN EN 12926:2015 Edition
Chemicals used for treatment of water intended for human consumption – Sodium peroxodisulfate Published By…
-
DIN EN 12020-2:2021 Edition
Aluminium und Aluminiumlegierungen – Stranggepresste Präzisionsprofile aus Legierungen EN AW-6060 und EN AW-6063 – Teil…
-
DIN EN 12923-1:2007 Edition
Advanced technical ceramics – Monolithic ceramics – Part 1: General practice for undertaking corrosion tests…
-
DIN EN ISO 12922:2020 Edition
Schmierstoffe, Industrieöle und verwandte Produkte (Klasse L) – Familie H (Hydraulische Systeme) – Anforderungen an…
-
DIN EN ISO 12960:2020 Edition
Geotextilien und geotextilverwandte Produkte – Screening-Prüfverfahren zur Bestimmung der Beständigkeit gegenüber sauren und alkalischen Flüssigkeiten…
-
DIN EN 12020-1:2022 Edition
Aluminium and aluminium alloys – Extruded precision profiles in alloys EN AW-6060 and EN AW-6063…
-
DIN EN 12385-3:2021 Edition
Drahtseile aus Stahldraht – Sicherheit – Teil 3: Informationen für Gebrauch und Instandhaltung Published By…
-
BS 2920:1973
Specification for cold-reduced tinplate and cold-reduced blackplate Published By Publication Date Number of Pages BSI…
-
CAN/CSA-C2.1-F06 (C2017):2006 Edition
Transformateurs de distribution monophasés et triphasés à liquide diélectrique (Incorporation de mise à jour jusqu’à…
-
DIN EN 12910:2013 Edition
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch – Granatsand Published By Publication Date…
-
ISO/TS 7024:2005
Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse…
-
DIN EN ISO 21920-3:2020 Edition
Geometrical product specifications (GPS) – Surface texture: Profile – Part 3: Specification operators (Draft) Published…
-
DIN EN 12120:2020 Edition
Chemicals used for treatment of water intended for human consumption – Sodium hydrogen sulfite (Draft)…
-
DIN EN 12620:2008 Edition
Gesteinskörnungen für Beton Published By Publication Date Number of Pages DIN 2008-07 61
-
DIN EN 12921-1:2011 Edition
Maschinen zur Oberflächenreinigung und -vorbehandlung von industriellen Produkten mittels Flüssigkeiten oder Dampfphasen – Teil 1:…
-
DIN EN 12980:2015 Edition
Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln – Nichtmetallische Gegenstände für gastronomische und gewerbliche Zwecke…
-
BSI 20/30398212 DC:2020 Edition
BS EN ISO 21920-2. Geometrical product specifications (GPS). Surface texture: Profile – Part 2. Terms,…
-
DIN EN 12929-2:2015 Edition
Safety requirements for cableway installations designed to carry persons – General requirements – Part 2:…
-
DIN CEN/TR 17292, DIN SPEC 4574:2019 Edition
Technical report regarding precision data for standards EN 12720, EN 12721, EN 12722, EN 15185…
-
DIN EN ISO 21920-1:2020 Edition
Geometrical product specifications (GPS) – Surface texture: Profile – Part 1: Indication of surface texture…
-
BS EN 17059:2018
Plating and anodizing lines. Safety requirements Published By Publication Date Number of Pages BSI 2018…
-
DIN EN 12929-1:2015 Edition
Safety requirements for cableway installations designed to carry persons – General requirements – Part 1:…
-
DIN EN 12520:2016 Edition
Möbel – Festigkeit, Dauerhaltbarkeit und Sicherheit – Anforderungen an Sitzmöbel für den Wohnbereich Published By…
-
BSI 20/30398215 DC:2020 Edition
BS EN ISO 21920-3. Geometrical product specifications (GPS). Surface texture: Profile – Part 3. Specification…
-
DIN EN ISO 21920-2:2020 Edition
Geometrical product specifications (GPS) – Surface texture: Profile – Part 2: Terms, definitions and surface…
-
DIN EN 12921-3:2010 Edition
Maschinen zur Oberflächenreinigung und -vorbehandlung von industriellen Produkten mittels Flüssigkeiten oder Dampfphasen – Teil 3:…
-
DIN EN 12900:2013 Edition
Refrigerant compressors – Rating conditions, tolerances and presentation of manufacturer’s performance data Published By Publication…
-
DIN EN 12927:2019 Edition
Safety requirements for cableway installations designed to carry persons – Ropes Published By Publication Date…
-
DIN EN ISO 14920:2015 Edition
Thermal spraying – Spraying and fusing of self-fluxing alloys Published By Publication Date Number of…
-
DIN EN 12320:2022 Edition
Baubeschläge – Hangschlösser und Hangschlossbeschläge – Anforderungen und Prüfverfahren Published By Publication Date Number of…
-
DIN 68861-1:2011 Edition
Möbeloberflächen – Teil 1: Verhalten bei chemischer Beanspruchung Published By Publication Date Number of Pages…
-
DIN EN 12921-2:2010 Edition
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part…