DIN ISO 1924-3:2007 Edition
$21.45
Papier und Pappe – Bestimmung von Eigenschaften bei zugförmiger Belastung – Teil 3: Verfahren mit konstanter Dehngeschwindigkeit (100 mm/min)
| Published By | Publication Date | Number of Pages |
| DIN | 2007-06 | 16 |
Dieser Teil der ISO 1924 legt ein Verfahren zur Messung der breitenbezogenen Bruchkraft, der elastischen Verformung beim Reißen, des Arbeitsaufnahmevermögens und der Zugsteifigkeit fest. Hierfür wird ein Prüfgerät mit einer konstanten Dehngeschwindigkeit von 100 mm/min verwendet.*Inhaltsverzeichnis
Related products
-
BS 1127-1:1990
Screwing dies and dienuts – Specification for hand- and machine-operated circular screwing dies and hand-operated…
-
ISO 21924-3:2017
Équipement de protection pour les arts martiaux — Partie 3: Exigences et méthodes d’essai complémentaires…
-
BS 1127:1974:1979 Edition
Specification for circular machine screwing dies, hand screwing dies and hexagon dienuts Published By Publication…
-
BSI 20/30406856 DC 2020
BS ISO 19264-1. Photography. Archiving systems. Imaging systems quality analysis – Part 1. Reflective originals…
-
BS 3597:1984
Specification for electroplated coatings of 65/35 tin/nickel alloy Published By Publication Date Number of Pages…
-
BS G 255:1994
Specification for type 3 terminal junction systems Published By Publication Date Number of Pages BSI…
-
BS ISO/IEC 11569:1993:1994 Edition
Information technology. Telecommunications and information exchange between systems. 26-pole interface connector mateability dimensions and contact…
-
BS 1127-4:1990
Screwing dies and dienuts – Terminology for circular screwing dies Published By Publication Date Number…
-
BS 3821-3:1974
Specification for hardmetal dies and associated hardmetal tools – As-sintered pellets and finished dies for…
-
BS 1574:1972:1974 Edition
Specification for split cotter pins. Metric and inch series Published By Publication Date Number of…
-
AS 1301.566:2019
Methods of test for pulp and paper -Tensile strength of paper and paperboard (constant rate…
-
BS EN ISO 1927-7:2012:2013 Edition
Monolithic (unshaped) refractory products – Tests on pre-formed shapes Published By Publication Date Number of…
-
BS 3821-2:1974
Specification for hardmetal dies and associated hardmetal tools – As-sintered pellets and finished dies for…
-
BS 3821-1:1974
Specification for hardmetal dies and associated hardmetal tools – Designation and marking of as-sintered pellets…
-
BS ISO 1924-3:2005
Paper and board. Determination of tensile properties – Constant rate of elongation method (100 mm/min)…
-
BS 3531-6.3:1994
Implants for osteosynthesis. Skeletal pins and wires – Specification for Kirschner skeletal wires Published By…
-
DIN EN ISO 527-2:2012 Edition
Kunststoffe – Bestimmung der Zugeigenschaften – Teil 2: Prüfbedingungen für Form- und Extrusionsmassen Published By…
-
CAN/CSA-ISO/CEI 10021-6-F04 (C2014):2004 Edition
Technologies de l’information – Systèmes de messagerie (MHS): Spécification des protocoles Published By Publication Date…
-
BS ISO 21250-1:2020
Rolling bearings. Noise testing of rolling bearing greases – Basic principles, testing assembly and test…
-
BS ISO 11438-4:1993:1994 Edition
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method – Determination of tin…
-
ISO 3856-3:1984
Peintures et vernis — Détermination de la teneur en métaux “solubles” — Partie 3: Détermination…
-
DIN EN ISO 1924-2:2009 Edition
Papier und Pappe – Bestimmung von Eigenschaften bei Zugbeanspruchung – Teil 2: Verfahren mit konstanter…
-
BS 3531-14:1984
Surgical implants – Specification for medullary pins (Rush type) and introducer/extractors Published By Publication Date…
-
BS EN 578:1994
Plastics piping systems. Plastics pipes and fittings. Determination of the opacity Published By Publication Date…
-
BS 7724:1994
Specification for split pins (metric series) Published By Publication Date Number of Pages BSI 1994…
-
DIN EN ISO 1927-3:2013 Edition
Ungeformte (monolithische) feuerfeste Erzeugnisse – Teil 3: Prüfung im Anlieferungszustand Published By Publication Date Number…
-
ISO 2857:1973/Amd 1:1984
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to…
-
BS EN ISO 1924-2:2008:2009 Edition
Paper and board. Determination of tensile properties – Constant rate of elongation method (20 mm/min)…
-
BS EN ISO 1234:1998
Split pins Published By Publication Date Number of Pages BSI 1998 14
-
CAN/CSA-C22.2 NO. 60601-1-4-02 (R2011):2002 Edition
Appareils électromédicaux – Partie 1-4: Règles générales de sécurité – Norme collatérale: Systèmes électromédicaux programmables…
-
BS 6623-4:1986
DTE/DCE interface connectors and pin assignments – Specification for 34-pin connector Published By Publication Date…
-
ISO 21250-1:2020
Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing…
-
BS 6531-4:1984
10 Mbps slotted ring local area network – Specification for Basic and Enhanced Class nodes…
-
BS 1872:1984
Specification for electroplated coatings of tin Published By Publication Date Number of Pages BSI 1984…
-
CAN/CSA-ISO/IEC 10021-5-F02 (C2015):2002 Edition
Technologies de l’information – Systèmes de messagerie (MHS) : Mémoire de messages : Définition du…
-
BS 5774:1984
Specification for internal diameters of round hermetically sealed metal cans for food and non-carbonated drinks…
-
CSA S16:19:2019 Edition
Design of steel structures (Including revision history of 2019) Published By Publication Date Number of…
-
BS 6487:1984
Specification for split pin holes and wire holes in bolts, screws and studs Published By…
-
DIN EN ISO 18314-3:2018 Edition
Analytische Farbmessung – Teil 3: Spezielle Indices Published By Publication Date Number of Pages DIN…
-
ISO/TR 8610:1984
Light gauge metal containers — Round vent-hole cans with soldered ends for milk and milk…
