🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
FL FloridaPlumbingCode 2020

FL FloridaPlumbingCode 2020

$56.33

Florida Building Code – Plumbing, Seventh Edition

Published By Publication Date Number of Pages
FL 2020 209
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

The 7th Edition (2020) update to the Florida Building Code: Plumbing is a fully integrated publication that updates the 6th Edition 2017 Florida Building Code: Plumbing using the latest changes to the 2018 International Plumbing Code® with customized amendments adopted statewide. Florida Building Code Administrative Chapter 1 is included. Chapter tabs are also included. Effective Date: December 31, 2020

PDF Catalog

PDF Pages PDF Title
1 FLORIDA BUILDING CODE – PLUMBING SEVENTH EDITION (2020)
2 FLORIDA BUILDING CODE – PLUMBING SEVENTH EDITION (2020) TITLE PAGE
3 COPYRIGHT
4 PREFACE
6 TABLE OF CONTENTS
10 CHAPTER 1 SCOPE AND ADMINISTRATION
PART 1—SCOPE AND APPLICATION
SECTION 101 GENERAL
SECTION 102 APPLICABILITY
PART 2—ADMINISTRATION AND ENFORCEMENT
SECTION 103 DEPARTMENT OF PLUMBING INSPECTION
SECTION 104 DUTIES AND POWERS OF THE CODE OFFICIAL
SECTION 105 APPROVAL
SECTION 106 PERMITS
SECTION 107 INSPECTIONS AND TESTING
SECTION 108 VIOLATIONS
SECTION 109 MEANS OF APPEAL
SECTION 110 TEMPORARY EQUIPMENT, SYSTEMS AND USES
12 CHAPTER 2 DEFINITIONS
SECTION 201 GENERAL
SECTION 202 GENERAL DEFINITIONS
20 CHAPTER 3 GENERAL REGULATIONS
SECTION 301 GENERAL
SECTION 302 EXCLUSION OF MATERIALS DETRIMENTAL TO THE SEWER SYSTEM
SECTION 303 MATERIALS
21 SECTION 304 RODENTPROOFING
SECTION 305 PROTECTION OF PIPES AND PLUMBING SYSTEM COMPONENTS
SECTION 306 TRENCHING, EXCAVATION AND BACKFILL
22 SECTION 307 STRUCTURAL SAFETY
SECTION 308 PIPING SUPPORT
23 TABLE 308.5 HANGER SPACING
SECTION 309 FLOOD HAZARD RESISTANCE
24 SECTION 310 WASHROOM AND TOILET ROOM REQUIREMENTS
SECTION 311 TOILET FACILITIES FOR WORKERS
SECTION 312 TESTS AND INSPECTIONS
25 SECTION 313 EQUIPMENT EFFICIENCIES
SECTION 314 CONDENSATE DISPOSAL
[M] TABLE 314.2.2 CONDENSATE DRAIN SIZING
26 SECTION 315 PENETRATIONS
SECTION 316 ALTERNATIVE ENGINEERED DESIGN
27 SECTION 317 PUBLIC FOOD SERVICE ESTABLISHMENTS AND FOOD ESTABLISHMENTS
SECTION 318 IRRIGATION
28 CHAPTER 4 FIXTURES, FAUCETS AND FIXTURE FITTINGS
SECTION 401 GENERAL
SECTION 402 FIXTURE MATERIALS
SECTION 403 MINIMUM PLUMBING FACILITIES
TABLE 403.1 MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2)
29 TABLE 403.1 —continued MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2)
30 TABLE 403.1 —continued MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2)
32 TABLE 403.6 PUBLIC SWIMMING POOL—REQUIRED FIXTURES COUNT
SECTION 404 ACCESSIBLE PLUMBING FACILITIES
SECTION 405 INSTALLATION OF FIXTURES
34 SECTION 406 AUTOMATIC CLOTHES WASHERS
SECTION 407 BATHTUBS
SECTION 408 BIDETS
SECTION 409 DISHWASHING MACHINES
SECTION 410 DRINKING FOUNTAINS
35 SECTION 411 EMERGENCY SHOWERS AND EYEWASH STATIONS
SECTION 412 FAUCETS AND FIXTURE FITTINGS
36 SECTION 413 FLOOR AND TRENCH DRAINS
SECTION 414 FLOOR SINKS
SECTION 415 FLUSHING DEVICES FOR WATER CLOSETS AND URINALS
SECTION 416 FOOD WASTE DISPOSER UNITS
SECTION 417 GARBAGE CAN WASHERS
37 SECTION 418 LAUNDRY TRAYS
SECTION 419 LAVATORIES
SECTION 420 MANUAL FOOD AND BEVERAGE DISPENSING EQUIPMENT
SECTION 421 SHOWERS
38 SECTION 422 SINKS
SECTION 423 SPECIALTY PLUMBING FIXTURES
SECTION 424 URINALS
39 SECTION 425 WATER CLOSETS
SECTION 426 WHIRLPOOL BATHTUBS
40 CHAPTER 5 WATER HEATERS
SECTION 501 GENERAL
SECTION 502 INSTALLATION
SECTION 503 CONNECTIONS
41 SECTION 504 SAFETY DEVICES
42 SECTION 505 INSULATION
44 CHAPTER 6 WATER SUPPLY AND DISTRIBUTION
SECTION 601 GENERAL
SECTION 602 WATER REQUIRED
45 SECTION 603 WATER SERVICE
SECTION 604 DESIGN OF BUILDING WATER DISTRIBUTION SYSTEM
TABLE 604.3 WATER DISTRIBUTION SYSTEM DESIGN CRITERIA REQUIRED CAPACITY AT FIXTURE SUPPLY PIPE OUTLETS
46 TABLE 604.4 MAXIMUM FLOW RATES AND CONSUMPTION FOR PLUMBING FIXTURES AND FIXTURE FITTINGS
TABLE 604.5 MINIMUM SIZES OF FIXTURE WATER SUPPLY PIPES
TABLE 604.5—continued MINIMUM SIZES OF FIXTURE WATER SUPPLY PIPES
47 TABLE 604.10.1 MANIFOLD SIZING
SECTION 605 MATERIALS, JOINTS AND CONNECTIONS
48 TABLE 605.3 WATER SERVICE PIPE
TABLE 605.4 WATER DISTRIBUTION PIPE
49 TABLE 605.5 PIPE FITTINGS
50 TABLE 605.7 VALVES
TABLE 605.8 MANUFACTURED PIPE NIPPLES
53 SECTION 606 INSTALLATION OF THE BUILDING WATER DISTRIBUTION SYSTEM
TABLE 606.5.4 SIZES FOR OVERFLOW PIPES FOR WATER SUPPLY TANKS
54 TABLE 606.5.7 SIZE OF DRAIN PIPES FOR WATER TANKS
SECTION 607 HOT WATER SUPPLY SYSTEM
55 SECTION 608 PROTECTION OF POTABLE WATER SUPPLY
56 TABLE 608.1 APPLICATION OF BACKFLOW PREVENTERS
57 FIGURE 608.9.1 PICTOGRAPH—DO NOT DRINK
TABLE 608.9.2.2 SIZE OF PIPE IDENTIFICATION
58 TABLE 608.16.1 MINIMUM REQUIRED AIR GAPS
60 TABLE 608.18.1 DISTANCE FROM CONTAMINATION TO PRIVATE WATER SUPPLIES AND PUMP SUCTION LINES
61 SECTION 609 HEALTH CARE PLUMBING
SECTION 610 DISINFECTION OF POTABLE WATER SYSTEM
SECTION 611 WATER TREATMENT UNITS
62 SECTION 612 SOLAR SYSTEMS
SECTION 613 TEMPERATURE CONTROL DEVICES AND VALVES
SECTION 614 WELL PUMPS AND TANKS USED FOR PRIVATE POTABLE WATER SYSTEMS
TABLE 614.1 MINIMUM PRIVATE POTABLE WATER SYSTEM PUMP SIZE
64 CHAPTER 7 SANITARY DRAINAGE
SECTION 701 GENERAL
SECTION 702 MATERIALS
TABLE 702.1 ABOVE-GROUND DRAINAGE AND VENT PIPE
65 TABLE 702.2 UNDERGROUND BUILDING DRAINAGE AND VENT PIPE
TABLE 702.3 BUILDING SEWER PIPE
66 TABLE 702.4 PIPE FITTINGS
SECTION 703 BUILDING SEWER
SECTION 704 DRAINAGE PIPING INSTALLATION
TABLE 704.1 SLOPE OF HORIZONTAL DRAINAGE PIPE
67 SECTION 705 JOINTS
69 TABLE 705.18 CAULKING FERRULE SPECIFICATIONS
TABLE 705.19 SOLDERING BUSHING SPECIFICATIONS
SECTION 706 CONNECTIONS BETWEEN DRAINAGE PIPING AND FITTINGS
70 TABLE 706.3 FITTINGS FOR CHANGE IN DIRECTION
SECTION 707 PROHIBITED JOINTS AND CONNECTIONS
SECTION 708 CLEANOUTS
71 SECTION 709 FIXTURE UNITS
TABLE 709.2 DRAINAGE FIXTURE UNITS FOR FIXTURE DRAINS OR TRAPS
72 TABLE 709.1 DRAINAGE FIXTURE UNITS FOR FIXTURES AND GROUPS
73 SECTION 710 DRAINAGE SYSTEM SIZING
TABLE 710.1(1) BUILDING DRAINS AND SEWERS
TABLE 710.1(2) HORIZONTAL FIXTURE BRANCHES AND STACKS
SECTION 711 OFFSETS IN DRAINAGE PIPING IN BUILDINGS OF FIVE STORIES OR MORE
74 SECTION 712 SUMPS AND EJECTORS
75 TABLE 712.4.2 MINIMUM CAPACITY OF SEWAGE PUMP OR SEWAGE EJECTOR
SECTION 713 COMPUTERIZED DRAINAGE DESIGN
SECTION 714 BACKWATER VALVES
SECTION 715 VACUUM DRAINAGE SYSTEMS
76 SECTION 716 REPLACEMENT OF UNDERGROUND BUILDING SEWERS AND BUILDING DRAINS BY PIPE-BURSTING METHODS
78 CHAPTER 8 INDIRECT/SPECIAL WASTE
SECTION 801 GENERAL
SECTION 802 INDIRECT WASTES
79 SECTION 803 SPECIAL WASTES
80 CHAPTER 9 VENTS
SECTION 901 GENERAL
SECTION 902 MATERIALS
SECTION 903 VENT TERMINALS
SECTION 904 OUTDOOR VENT EXTENSIONS
81 SECTION 905 VENT CONNECTIONS AND GRADES
SECTION 906 VENT PIPE SIZING
SECTION 907 VENTS FOR STACK OFFSETS
82 TABLE 906.1 SIZE AND DEVELOPED LENGTH OF STACK VENTS AND VENT STACKS
83 TABLE 906.5.1 SIZE AND LENGTH OF SUMP VENTS
SECTION 908 RELIEF VENTS—STACKS OF MORE THAN 10 BRANCH INTERVALS
SECTION 909 FIXTURE VENTS
TABLE 909.1 MAXIMUM DISTANCE OF FIXTURE TRAP FROM VENT
SECTION 910 INDIVIDUAL VENT
SECTION 911 COMMON VENT
84 TABLE 911.3 COMMON VENT SIZES
SECTION 912 WET VENTING
TABLE 912.3 WET VENT SIZE
SECTION 913 WASTE STACK VENT
TABLE 913.4 WASTE STACK VENT SIZE
85 SECTION 914 CIRCUIT VENTING
SECTION 915 COMBINATION WASTE AND VENT SYSTEM
TABLE 915.2.2 SIZE OF COMBINATION WASTE AND VENT PIPE
SECTION 916 ISLAND FIXTURE VENTING
86 SECTION 917 SINGLE STACK VENT SYSTEM
TABLE 917.2 SINGLE STACK SIZE
87 SECTION 918 AIR ADMITTANCE VALVES
SECTION 919 ENGINEERED VENT SYSTEMS
EQUATION 9-1
88 TABLE 919.2 MINIMUM DIAMETER AND MAXIMUM LENGTH OF INDIVIDUAL BRANCH FIXTURE VENTS AND INDIVIDUAL FIXTURE HEADER VENTS FOR SMOOTH PIPES
SECTION 920 COMPUTERIZED VENT DESIGN
90 CHAPTER 10 TRAPS, INTERCEPTORS AND SEPARATORS
SECTION 1001 GENERAL
SECTION 1002 TRAP REQUIREMENTS
91 SECTION 1003 INTERCEPTORS AND SEPARATORS
92 TABLE 1003.3.5.1 CAPACITY OF GREASE INTERCEPTORSa
93 SECTION 1004 MATERIALS, JOINTS AND CONNECTIONS
94 CHAPTER 11 STORM DRAINAGE
SECTION 1101 GENERAL
SECTION 1102 MATERIALS
TABLE 1102.4 BUILDING STORM SEWER PIPE
95 TABLE 1102.5 SUBSOIL DRAIN PIPE
TABLE 1102.7 PIPE FITTING
SECTION 1103 TRAPS
96 SECTION 1104 CONDUCTORS AND CONNECTIONS
SECTION 1105 ROOF DRAINS
SECTION 1106 SIZE OF CONDUCTORS, LEADERS AND STORM DRAINS
TABLE 1106.2 STORM DRAIN PIPE SIZING
TABLE 1106.3 VERTICAL LEADER SIZING
97 TABLE 1106.6 HORIZONTAL GUTTER SIZING
SECTION 1107 SIPHONIC ROOF DRAINAGE SYSTEMS
SECTION 1108 SECONDARY (EMERGENCY) ROOF DRAINS
98 FIGURE 1106.1 100-YEAR, 1-HOUR RAINFALL (INCHES) EASTERN UNITED STATES
99 FIGURE 1106.1—continued 100-YEAR, 1-HOUR RAINFALL (INCHES) CENTRAL UNITED STATES
100 FIGURE 1106.1—continued 100-YEAR, 1-HOUR RAINFALL (INCHES) WESTERN UNITED STATES
101 FIGURE 1106.1—continued 100-YEAR, 1-HOUR RAINFALL (INCHES) ALASKA
102 FIGURE 1106.1—continued 100-YEAR, 1-HOUR RAINFALL (INCHES) HAWAII
103 SECTION 1109 COMBINED SANITARY AND STORM PUBLIC SEWER
SECTION 1110 CONTROLLED FLOW ROOF DRAIN SYSTEMS
SECTION 1111 SUBSOIL DRAINS
SECTION 1112 BUILDING SUBDRAINS
SECTION 1113 SUMPS AND PUMPING SYSTEMS
104 CHAPTER 12 SPECIAL PIPING AND STORAGE SYSTEMS
SECTION 1201 GENERAL
SECTION 1202 MEDICAL GASES
SECTION 1203 OXYGEN SYSTEMS
106 CHAPTER 13 NONPOTABLE WATER SYSTEMS
SECTION 1301 GENERAL
FIGURE 1301.3 PICTOGRAPH—DO NOT DRINK
108 SECTION 1302 ON-SITE NONPOTABLE WATER REUSE SYSTEMS
109 TABLE 1302.7.1 LOCATION OF NONPOTABLE WATER REUSE STORAGE TANKS
110 SECTION 1303 NONPOTABLE RAINWATER COLLECTION AND DISTRIBUTION SYSTEMS
111 TABLE 1303.10.1 LOCATION OF RAINWATER STORAGE TANKS
112 SECTION 1304 RECLAIMED WATER SYSTEMS
114 CHAPTER 14 SUBSURFACE LANDSCAPE IRRIGATION SYSTEMS
116 CHAPTER 15 REFERENCED STANDARDS
ANSI
ASHRAE
ASME
118 ASPE
ASSE
119 ASTM
123 AWS
AWWA
124 CISPI
CSA
126 Florida Codes
IAPMO
ISEA
127 MSS
NFPA
NSF
PDI
128 PSAI
SRCC
UL
WQA
130 APPENDIX A PLUMBING PERMIT FEE SCHEDULE
PERMIT ISSUANCE
UNIT FEE SCHEDULE
OTHER INSPECTIONS AND FEES
132 APPENDIX B RATES OF RAINFALL FOR VARIOUS CITIES
134 APPENDIX C STRUCTURAL SAFETY
SECTION C101 CUTTING, NOTCHING AND BORING IN WOOD MEMBERS
136 APPENDIX D DEGREE DAY AND DESIGN TEMPERATURES
TABLE D101 DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES
137 TABLE D101—continued DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES
138 TABLE D101—continued DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES
139 TABLE D101—continued DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES
140 TABLE D101—continued DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES
142 APPENDIX E SIZING OF WATER PIPING SYSTEM
SECTION E101 GENERAL
SECTION E102 INFORMATION REQUIRED
SECTION E103 SELECTION OF PIPE SIZE
146 TABLE E.1
TABLE E.2
147 FIGURE E103.3(1) EXAMPLE-SIZING
148 TABLE E103.3(1) RECOMMENDED TABULAR ARRANGEMENT FOR USE IN SOLVING PIPE SIZING PROBLEMS
149 TABLE E103.3(2) LOAD VALUES ASSIGNED TO FIXTURESa
150 TABLE E103.3(3) TABLE FOR ESTIMATING DEMAND
151 TABLE E103.3(3)-continued TABLE FOR ESTIMATING DEMAND
TABLE E103.3(4) LOSS OF PRESSURE THROUGH TAPS AND TEES IN POUNDS PER SQUARE INCH (psi)
152 TABLE E103.3(5) ALLOWANCE IN EQUIVALENT LENGTHS OF PIPE FOR FRICTION LOSS IN VALVES AND THREADED FITTINGS (feet)
TABLE E103.3(6) PRESSURE LOSS IN FITTINGS AND VALVES EXPRESSED AS EQUIVALENT LENGTH OF TUBEa (feet)
153 FIGURE E103.3(2) FRICTION LOSS IN SMOOTH PIPEa (TYPE K, ASTM B88 COPPER TUBING)
154 FIGURE E103.3(3) FRICTION LOSS IN SMOOTH PIPEa (TYPE L, ASTM B88 COPPER TUBING)
155 FIGURE E103.3(4) FRICTION LOSS IN SMOOTH PIPEa (TYPE M, ASTM B88 COPPER TUBING)
156 FIGURE E103.3(5) FRICTION LOSS IN FAIRLY SMOOTH PIPE
157 FIGURE E103.3(6) FRICTION LOSS IN FAIRLY ROUGH PIPEa
158 FIGURE E103.3(7) FRICTION LOSS IN ROUGH PIPEa
159 SECTION E201 SELECTION OF PIPE SIZE
SECTION E202 DETERMINATION OF PIPE VOLUMES
160 TABLE E201.1 MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES (w.s.f.u.)
161 TABLE E201.1—continued MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES (w.s.f.u.)
162 TABLE E202.1 INTERNAL VOLUME OF VARIOUS WATER DISTRIBUTION TUBING
164 APPENDIX F PROPOSED CONSTRUCTION BUILDING CODES FOR TURF AND LANDSCAPE IRRIGATION SYSTEMS
PART 1: GENERAL
166 PART II: DESIGN CRITERIA
168 PART III: STANDARDS
169 PART IV: MATERIALS
171 PART V: INSTALLATION
172 PART VI: TESTING & INSPECTIONS
176 INDEX
186 FLORIDA BUILDING CODE – BUILDING SEVENTH EDITION (2020) CHAPTER 1
188 CHAPTER 1 SCOPE AND ADMINISTRATION
PART 1—SCOPE AND APPLICATION
SECTION 101 GENERAL
SECTION 102 APPLICABILITY
191 PART 2—ADMINISTRATION AND ENFORCEMENT
SECTION 103 DEPARTMENT OF BUILDING SAFETY
SECTION 104 DUTIES AND POWERS OF BUILDING OFFICIAL
SECTION 105 PERMITS
197 SECTION 106 FLOOR AND ROOF DESIGN LOADS
198 SECTION 107 SUBMITTAL DOCUMENTS
202 SECTION 108 TEMPORARY STRUCTURES AND USES
SECTION 109 FEES
SECTION 110 INSPECTIONS
206 SECTION 111 CERTIFICATE OF OCCUPANCY
SECTION 112 SERVICE UTILITIES
SECTION 113 BOARD OF APPEALS
SECTION 114 VIOLATIONS
207 SECTION 115 STOP WORK ORDER
SECTION 116 UNSAFE STRUCTURES AND EQUIPMENT
SECTION 117 VARIANCES IN FLOOD HAZARD AREAS
208 HELPFUL TOOLS FOR LEARNING AND APPLYING YOUR PLUMBING CODE
209 ICC LEARNING CENTER

Related products

FL FloridaPlumbingCode 2020
$56.33