ICC IBC 2024 1stptg
$80.00
International Building Code
| Published By | Publication Date | Number of Pages |
| ICC | 2024 |
The 2024 International Codes (I-Codes ) have undergone substantial formatting changes as part of the digital transformation strategy of the International Code Council (ICC ) to improve the user experience. The changes, promoting a cleaner, more modern look and enhancing readability and sustainability, include: Single column text format and modernized font styles improves readability QR Codes replace vertical margin sidebars and arrows to identify code changes more accurately Shading for table headers and notes improves locating tables and applicable notes Grouping of associated content brings tables and figures immediately after the parent section Users have capability to validate authenticity of their book and register it with the ICC to receive incentives. The 2024 IBC applies to all buildings except detached one- and two-family dwellings and townhouses up to three stories. The 2024 IBC contains many important changes such as: Duties and powers of the building official: an overall reformat of Section 104 regulating duties of the building official, the approach for reviewing for code compliance has been significantly updated to reflect the current manner that alternate materials, designs and methods are evaluated. For the first time ever, the 2024 IBC includes provisions for tornado loadings. Updated wind, earthquake, and snow loads. The updated design rain loads are now based on the summation of the static head, the hydraulic head, and the ponding head. Updates to Risk Categories including Photovoltaic (PV) panel systems and facilities providing power generation. Updated and expanded provisions for Temporary Structures. New provisions regarding the wind resistance of aggregate-surfaced roofs. Roof Coverings: Updated provisions for underlayment. New special inspection provisions for metal building systems. New provisions for structural concrete reinforced with glass-fiber reinforcement. Concrete: To improve ease of use, Chapter 19 on Concrete has been Updated and reformatted. Masonry: TMS 402 and TMS 602 references have been updated to the latest 2022 editions. An increase in the allowable height of a Group R-2 occupancy building with a NFPA 13R sprinkler system. Occupiable space requirements now apply if a roof is usable for anything more than maintenance or repair and occupants must have access to multiple egress options from a story based on the occupant load and the story requirements. Adult changing tables are now regulated where they are provided and are also required in large assembly and mercantile, college lecture hall/classroom buildings and highway rest stops. Fire-resistance-rated Wall Continuity: Updates on how supporting construction for exterior walls is to be fire-resistance-rated, especially in the case of a parapet. Openings in Shaft Enclosures: Additional exceptions are provided for shaft enclosures, including new allowances for openings and penetrations. Carbon Monoxide Detection: Carbon monoxide (CO) detection is now required in all occupancies where a CO-producing device is present. Detection and notification can be addressed in several ways. Vapor retarders: Several updates have been made to the vapor retarder provisions for consistency with the IRC and IECC. The changes also provide additional options and better guidance for allowable types and locations of permitted vapor retarders. Vertical and lateral Flame propagation compliance methods: Clarification has been provided as to when testing in accordance with NFPA 285, related to vertical and lateral flame propagation, is required. Previously this information was scattered in a variety of locations within Chapters 14 and 26. New Appendix P sets forth the scoping limitations and technical criteria for sleeping lofts that are provided within Group R dwelling units and sleeping units.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | 2024 INTERNATIONAL BUILDING CODE® |
| 2 | 2024 INTERNATIONAL BUILDING CODE® |
| 3 | COPYRIGHT |
| 4 | NEW DESIGN FOR THE 2024 INTERNATIONAL CODES |
| 5 | PREFACE FORMATTING CHANGES TO THE 2024 INTERNATIONAL CODES |
| 17 | CONTENTS |
| 23 | CHAPTER 1: SCOPE AND ADMINISTRATION PART 1—SCOPE AND APPLICATION SECTION 101—SCOPE AND GENERAL REQUIREMENTS |
| 24 | SECTION 102—APPLICABILITY PART 2—ADMINISTRATION AND ENFORCEMENT SECTION 103—CODE COMPLIANCE AGENCY SECTION 104—DUTIES AND POWERS OF BUILDING OFFICIAL |
| 27 | SECTION 105—PERMITS |
| 29 | SECTION 106—FLOOR AND ROOF DESIGN LOADS SECTION 107—CONSTRUCTION DOCUMENTS |
| 30 | SECTION 108—TEMPORARY STRUCTURES, EQUIPMENT AND SYSTEMS SECTION 109—FEES |
| 31 | SECTION 110—INSPECTIONS |
| 32 | SECTION 111—CERTIFICATE OF OCCUPANCY SECTION 112—SERVICE UTILITIES |
| 33 | SECTION 113—MEANS OF APPEALS SECTION 114—VIOLATIONS SECTION 115—STOP WORK ORDER SECTION 116—UNSAFE STRUCTURES AND EQUIPMENT |
| 35 | CHAPTER 2: DEFINITIONS SECTION 201—GENERAL SECTION 202—DEFINITIONS |
| 70 | CHAPTER 3: OCCUPANCY CLASSIFICATION AND USE SECTION 301—SCOPE SECTION 302—OCCUPANCY CLASSIFICATION AND USE DESIGNATION SECTION 303—ASSEMBLY GROUP A |
| 72 | SECTION 304—BUSINESS GROUP B SECTION 305—EDUCATIONAL GROUP E |
| 73 | SECTION 306—FACTORY GROUP F |
| 74 | SECTION 307—HIGH-HAZARD GROUP H [F] TABLE 307.1(1)—MAXIMUM ALLOWABLE QUANTITY PER CONTROL AREA OF HAZARDOUS MATERIALS POSING A PHYSICAL HAZARDa, c, i, l, m |
| 75 | [F] TABLE 307.1(1)—MAXIMUM ALLOWABLE QUANTITY PER CONTROL AREA OF HAZARDOUS MATERIALS POSING A PHYSICAL HAZARDa, c, i, l, m—continued |
| 76 | [F] TABLE 307.1(1)—MAXIMUM ALLOWABLE QUANTITY PER CONTROL AREA OF HAZARDOUS MATERIALS POSING A PHYSICAL HAZARDa, c, i, l, m—continued |
| 77 | [F] TABLE 307.1(2)—MAXIMUM ALLOWABLE QUANTITY PER CONTROL AREA OF HAZARDOUS MATERIALS POSING A HEALTH HAZARDa, c, h, i TABLE 307.1.1—HAZARDOUS MATERIALS EXEMPTIONSa |
| 78 | TABLE 307.1.1—HAZARDOUS MATERIALS EXEMPTIONSa—continued |
| 80 | SECTION 308—INSTITUTIONAL GROUP I |
| 81 | SECTION 309—MERCANTILE GROUP M |
| 82 | SECTION 310—RESIDENTIAL GROUP R |
| 83 | SECTION 311—STORAGE GROUP S |
| 85 | SECTION 312—UTILITY AND MISCELLANEOUS GROUP U |
| 86 | CHAPTER 4: SPECIAL DETAILED REQUIREMENTS BASED ON OCCUPANCY AND USE SECTION 401—SCOPE SECTION 402—COVERED MALL AND OPEN MALL BUILDINGS |
| 90 | SECTION 403—HIGH-RISE BUILDINGS |
| 91 | TABLE 403.2.3—MINIMUM BOND STRENGTH |
| 93 | SECTION 404—ATRIUMS |
| 94 | SECTION 405—UNDERGROUND BUILDINGS |
| 96 | SECTION 406—MOTOR-VEHICLE-RELATED OCCUPANCIES |
| 98 | TABLE 406.5.4—OPEN PARKING GARAGES AREA AND HEIGHT |
| 100 | SECTION 407—GROUP I-2 |
| 103 | SECTION 408—GROUP I-3 |
| 105 | SECTION 409—MOTION PICTURE PROJECTION ROOMS |
| 106 | SECTION 410—STAGES, PLATFORMS AND TECHNICAL PRODUCTION AREAS |
| 108 | SECTION 411—SPECIAL AMUSEMENT AREAS |
| 109 | SECTION 412—AIRCRAFT-RELATED OCCUPANCIES TABLE 412.2.1.1—HEIGHT LIMITATIONS FOR AIRPORT TRAFFIC CONTROL TOWERS |
| 111 | TABLE 412.3.6—[F] TABLE 412.3.6—HANGAR FIRE SUPPRESSION REQUIREMENTSa, b, c |
| 112 | [BE] TABLE 412.6—AIRCRAFT MANUFACTURING EXIT ACCESS TRAVEL DISTANCE |
| 113 | SECTION 413—COMBUSTIBLE STORAGE SECTION 414—HAZARDOUS MATERIALS |
| 114 | [F] TABLE 414.2.2—DESIGN AND NUMBER OF CONTROL AREAS [F] TABLE 414.2.5.1—MAXIMUM ALLOWABLE QUANTITY PER INDOOR AND OUTDOOR CONTROL AREA IN GROUP MAND S OCCUPANCIES OF NONFLAMMABLE SOLIDS AND NONFLAMMABLE AND NONCOMBUSTIBLE LIQUIDSd, e, f |
| 115 | [F] TABLE 414.2.5.1—MAXIMUM ALLOWABLE QUANTITY PER INDOOR AND OUTDOOR CONTROL AREA IN GROUP MAND S OCCUPANCIES OF NONFLAMMABLE SOLIDS AND NONFLAMMABLE AND NONCOMBUSTIBLE LIQUIDSd, e, f—continued [F] TABLE 414.2.5.2—MAXIMUM ALLOWABLE QUANTITY OF FLAMMABLE ANDCOMBUSTIBLE LIQUIDS IN WHOLESALE AND RETAIL SALES OCCUPANCIES PER CONTROL AREAa |
| 116 | [F] TABLE 414.2.5.4—MAXIMUM ALLOWABLE QUANTITY OF LOW BURNING VELOCITYCATEGORY 1B FLAMMABLE GAS IN GROUP M AND S OCCUPANCIES PER CONTROL AREAa [F] TABLE 414.5.1—EXPLOSION CONTROL REQUIREMENTSa, h |
| 117 | [F] TABLE 414.5.1—EXPLOSION CONTROL REQUIREMENTSa, h—continued |
| 118 | SECTION 415—GROUPS H-1, H-2, H-3, H-4 AND H-5 |
| 119 | TABLE 415.6.5—[F] TABLE 415.6.5—DETACHED BUILDING REQUIRED |
| 121 | [F] TABLE 415.11.1.1—QUANTITY LIMITS FOR HAZARDOUS MATERIALS IN A SINGLE FABRICATION AREA IN GROUP H-5a |
| 122 | [F] TABLE 415.11.1.1—QUANTITY LIMITS FOR HAZARDOUS MATERIALS IN A SINGLE FABRICATION AREA IN GROUP H-5a—continued |
| 127 | SECTION 416—SPRAY APPLICATION OF FLAMMABLE FINISHES SECTION 417—DRYING ROOMS |
| 128 | SECTION 418—ORGANIC COATINGS SECTION 419—ARTIFICIAL DECORATIVE VEGETATION SECTION 420—GROUPS I-1, R-1, R-2, R-3 AND R-4 |
| 129 | SECTION 421—HYDROGEN FUEL GAS ROOMS |
| 130 | SECTION 422—AMBULATORY CARE FACILITIES |
| 131 | SECTION 423—STORM SHELTERS |
| 132 | SECTION 424—PLAY STRUCTURES SECTION 425—HYPERBARIC FACILITIES SECTION [F] 426—COMBUSTIBLE DUSTS, GRAIN PROCESSING AND STORAGE |
| 133 | SECTION 427—MEDICAL GAS SYSTEMS |
| 134 | SECTION 428—HIGHER EDUCATION LABORATORIES [F] TABLE 428.3—DESIGN AND NUMBER OF LABORATORY SUITES PER FLOOR |
| 136 | CHAPTER 5: GENERAL BUILDING HEIGHTS AND AREAS SECTION 501—GENERAL SECTION 502—BUILDING ADDRESS SECTION 503—GENERAL BUILDING HEIGHT AND AREA LIMITATIONS |
| 137 | SECTION 504—BUILDING HEIGHT AND NUMBER OF STORIES TABLE 504.3—ALLOWABLE BUILDING HEIGHT IN FEET ABOVE GRADE PLANEa |
| 138 | TABLE 504.3—ALLOWABLE BUILDING HEIGHT IN FEET ABOVE GRADE PLANEa—continued TABLE 504.4—ALLOWABLE NUMBER OF STORIES ABOVE GRADE PLANEa, b |
| 139 | TABLE 504.4—ALLOWABLE NUMBER OF STORIES ABOVE GRADE PLANEa, b—continued SECTION 505—MEZZANINES AND EQUIPMENT PLATFORMS |
| 141 | SECTION 506—BUILDING AREA TABLE 506.2—ALLOWABLE AREA FACTOR (At = NS, S1, S13R, S13D or SM, as applicable) IN SQUARE FEETa, b |
| 142 | TABLE 506.2—ALLOWABLE AREA FACTOR (At = NS, S1, S13R, S13D or SM, as applicable) IN SQUARE FEETa, b—continued |
| 143 | TABLE 506.2—ALLOWABLE AREA FACTOR (At = NS, S1, S13R, S13D or SM, as applicable) IN SQUARE FEETa, b—continued |
| 144 | TABLE 506.3.3—FRONTAGE INCREASE FACTORa TABLE 506.3.3.1—SECTION 507 BUILDINGSa |
| 145 | TABLE 506.3.3.1—SECTION 507 BUILDINGSa—continued SECTION 507—UNLIMITED AREA BUILDINGS |
| 147 | SECTION 508—MIXED USE AND OCCUPANCY |
| 148 | TABLE 508.4—REQUIRED SEPARATION OF OCCUPANCIES (HOURS)f |
| 149 | SECTION 509—INCIDENTAL USES [F] TABLE 509.1—INCIDENTAL USES |
| 150 | [F] TABLE 509.1—INCIDENTAL USES—continued |
| 151 | SECTION 510—SPECIAL PROVISIONS |
| 153 | CHAPTER 6: TYPES OF CONSTRUCTION SECTION 601—GENERAL TABLE 601—FIRE-RESISTANCE RATING REQUIREMENTS FOR BUILDING ELEMENTS (HOURS) |
| 154 | SECTION 602—CONSTRUCTION CLASSIFICATION |
| 157 | SECTION 603—COMBUSTIBLE MATERIAL IN TYPES I AND II CONSTRUCTION |
| 159 | CHAPTER 7: FIRE AND SMOKE PROTECTION FEATURES SECTION 701—GENERAL SECTION 702—MULTIPLE-USE FIRE ASSEMBLIES SECTION 703—FIRE-RESISTANCE RATINGS AND FIRE TESTS |
| 160 | SECTION 704—FIRE-RESISTANCE RATING OF STRUCTURAL MEMBERS |
| 162 | SECTION 705—EXTERIOR WALLS TABLE 705.2—MINIMUM DISTANCE OF PROJECTION |
| 164 | TABLE 705.5—FIRE-RESISTANCE RATING REQUIREMENTS FOR EXTERIOR WALLS BASED ON FIRE SEPARATION DISTANCE a, d, g—continued |
| 165 | TABLE 705.5—FIRE-RESISTANCE RATING REQUIREMENTS FOR EXTERIOR WALLS BASED ON FIRE SEPARATION DISTANCE a, d, g FIGURE 705.8—EQUIVALENT OPENING FACTOR TABLE 705.9—MAXIMUM AREA OF EXTERIOR WALL OPENINGS BASED ON FIRE SEPARATION DISTANCE AND DEGREE OF OPENING PROTECTION |
| 166 | TABLE 705.9—MAXIMUM AREA OF EXTERIOR WALL OPENINGS BASED ON FIRE SEPARATION DISTANCE AND DEGREE OF OPENING PROTECTION—continued |
| 168 | SECTION 706—FIRE WALLS TABLE 706.4—FIRE WALL FIRE-RESISTANCE RATINGS |
| 170 | SECTION 707—FIRE BARRIERS |
| 171 | TABLE 707.3.10—FIRE-RESISTANCE-RATING REQUIREMENTS FOR FIRE BARRIERS, FIRE WALLS OR HORIZONTAL ASSEMBLIES BETWEEN FIRE AREAS |
| 172 | SECTION 708—FIRE PARTITIONS |
| 173 | SECTION 709—SMOKE BARRIERS |
| 174 | SECTION 710—SMOKE PARTITIONS |
| 175 | SECTION 711—FLOOR AND ROOF ASSEMBLIES |
| 176 | SECTION 712—VERTICAL OPENINGS |
| 177 | SECTION 713—SHAFT ENCLOSURES |
| 179 | SECTION 714—PENETRATIONS |
| 182 | SECTION 715—JOINTS AND VOIDS |
| 183 | SECTION 716—OPENING PROTECTIVES TABLE 716.1(1)—MARKING FIRE-RATED GLAZING ASSEMBLIES |
| 184 | TABLE 716.1(2)—OPENING FIRE PROTECTION ASSEMBLIES, RATINGS AND MARKINGS |
| 185 | TABLE 716.1(2)—OPENING FIRE PROTECTION ASSEMBLIES, RATINGS AND MARKINGS—continued |
| 186 | TABLE 716.1(3)—FIRE WINDOW ASSEMBLY FIRE PROTECTION RATINGS |
| 190 | SECTION 717—DUCTS AND AIR TRANSFER OPENINGS |
| 191 | TABLE 717.3.2.1—FIRE DAMPER RATING |
| 196 | SECTION 718—CONCEALED SPACES |
| 197 | SECTION 719—FIRE-RESISTANCE REQUIREMENTS FOR PLASTER |
| 198 | SECTION 720—THERMAL- AND SOUND-INSULATING MATERIALS |
| 199 | SECTION 721—PRESCRIPTIVE FIRE RESISTANCE TABLE 721.1(1)—MINIMUM PROTECTION OF STRUCTURAL PARTS BASED ON TIME PERIODS FOR VARIOUS NONCOMBUSTIBLE INSULATING MATERIALSm |
| 200 | TABLE 721.1(1)—MINIMUM PROTECTION OF STRUCTURAL PARTS BASED ON TIME PERIODS FOR VARIOUS NONCOMBUSTIBLE INSULATING MATERIALSm—continued |
| 201 | TABLE 721.1(1)—MINIMUM PROTECTION OF STRUCTURAL PARTS BASED ON TIME PERIODS FOR VARIOUS NONCOMBUSTIBLE INSULATING MATERIALS m—continued |
| 202 | TABLE 721.1(1)—MINIMUM PROTECTION OF STRUCTURAL PARTS BASED ON TIME PERIODS FOR VARIOUS NONCOMBUSTIBLE INSULATING MATERIALSm—continued |
| 203 | TABLE 721.1(1)—MINIMUM PROTECTION OF STRUCTURAL PARTS BASED ON TIME PERIODS FOR VARIOUS NONCOMBUSTIBLE INSULATING MATERIALSm—continued |
| 204 | TABLE 721.1(2)—RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONSa, o, p |
| 205 | TABLE 721.1(2)—RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONSa, o, p—continued |
| 206 | TABLE 721.1(2)—RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONSa, o, p—continued |
| 207 | TABLE 721.1(2)—RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONSa, o, p—continued |
| 208 | TABLE 721.1(2)—RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONSa, o, p—continued |
| 209 | TABLE 721.1(2)—RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONSa, o, p—continued |
| 210 | TABLE 721.1(2)—RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONSa, o, p—continued |
| 211 | TABLE 721.1(2)—RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONSa, o, p—continued |
| 212 | TABLE 721.1(2)—RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONSa, o, p—continued |
| 213 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q |
| 214 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 215 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 216 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 217 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 218 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 219 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 220 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 221 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 222 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 223 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 224 | TABLE 721.1(3)—MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS a, q—continued |
| 225 | SECTION 722—CALCULATED FIRE RESISTANCE TABLE 722.2.1.1—MINIMUM EQUIVALENT THICKNESS OF CAST-IN-PLACE OR PRECAST CONCRETE WALLS, LOAD-BEARING OR NONLOAD-BEARING |
| 226 | TABLE 722.2.1.2(1)—VALUES OF Rn0.59 FOR USE IN EQUATION 7-4 TABLE 722.2.1.2(2)—FIRE-RESISTANCE RATINGS BASED ON R0.59 |
| 227 | FIGURE 722.2.1.2—FIRE-RESISTANCE RATINGS OF TWO-WYTHE CONCRETE WALLS FIGURE 722.2.1.3.1—CERAMIC FIBER JOINT PROTECTION |
| 228 | TABLE 722.2.1.4(1)—MULTIPLYING FACTOR FOR FINISHES ON NONFIRE-EXPOSED SIDE OF CONCRETE OR CONCRETE MASONRY WALL TABLE 722.2.1.4(2)—TIME ASSIGNED TO FINISH MATERIALS ON FIRE-EXPOSED SIDE OF WALLa |
| 229 | TABLE 722.2.2.1—MINIMUM SLAB THICKNESS (inches) FIGURE 722.2.2.1.2—DETERMINATION OF SLAB THICKNESS FOR SLOPING SOFFITS |
| 230 | FIGURE 722.2.2.1.3—SLABS WITH RIBBED OR UNDULATING SOFFITS FIGURE 722.2.2.2—FIRE-RESISTANCE RATINGS FOR TWO-COURSE CONCRETE FLOORS |
| 231 | FIGURE 722.2.2.3(1)—FIRE-RESISTANCE RATINGS FOR CONCRETE ROOF ASSEMBLIES |
| 232 | FIGURE 722.2.2.3(2)—FIRE-RESISTANCE RATINGS FOR CONCRETE ROOF ASSEMBLIES TABLE 722.2.3(1)—COVER THICKNESS FOR REINFORCED CONCRETE FLOOR OR ROOF SLABS (inches) TABLE 722.2.3(2)—COVER THICKNESS FOR PRESTRESSED CONCRETE FLOOR OR ROOF SLABS (inches) |
| 233 | TABLE 722.2.3(2)—COVER THICKNESS FOR PRESTRESSED CONCRETE FLOOR OR ROOF SLABS (inches)—continued TABLE 722.2.3(3)—MINIMUM COVER FOR MAIN REINFORCING BARS OF REINFORCED CONCRETE BEAMSc (APPLICABLE TO ALL TYPES OF STRUCTURAL CONCRETE) TABLE 722.2.3(4)—MINIMUM COVER FOR PRESTRESSED CONCRETE BEAMS 8 INCHES OR GREATER IN WIDTHb TABLE 722.2.3(5)—MINIMUM COVER FOR PRESTRESSED CONCRETE BEAMS OF ALL WIDTHS |
| 234 | TABLE 722.2.3(5)—MINIMUM COVER FOR PRESTRESSED CONCRETE BEAMS OF ALL WIDTHS—continued TABLE 722.2.4—MINIMUM DIMENSION OF CONCRETE COLUMNS (inches) |
| 235 | TABLE 722.3.2—MINIMUM EQUIVALENT THICKNESS (inches) OF BEARING OR NONBEARING CONCRETE MASONRY WALLSa, b, c, d |
| 236 | TABLE 722.3.4—MINIMUM COVER OF LONGITUDINAL REINFORCEMENT IN FIRE-RESISTANCE-RATED REINFORCED CONCRETE MASONRY LINTELS (inches) TABLE 722.3.5—MINIMUM DIMENSION OF CONCRETE MASONRY COLUMNS (inches) |
| 237 | TABLE 722.4.1(1)—FIRE-RESISTANCE PERIODS OF CLAY MASONRY WALLS TABLE 722.4.1(2)—FIRE-RESISTANCE RATINGS FOR BEARING STEEL FRAME BRICK VENEER WALLS OR PARTITIONS TABLE 722.4.1(3)—VALUES OF Rn 0.59 TABLE 722.4.1(4)—COEFFICIENTS FOR PLASTER, pla |
| 238 | TABLE 722.4.1(4)—COEFFICIENTS FOR PLASTER, pla—continued TABLE 722.4.1(5)—REINFORCED MASONRY LINTELS TABLE 722.4.1(6)—REINFORCED CLAY MASONRY COLUMNS |
| 239 | TABLE 722.5.1(1)—W/D RATIOS FOR STEEL COLUMNS |
| 240 | TABLE 722.5.1(1)—W/D RATIOS FOR STEEL COLUMNS—continued |
| 241 | TABLE 722.5.1(1)—W/D RATIOS FOR STEEL COLUMNS—continued TABLE 722.5.1(2)—PROPERTIES OF CONCRETE FIGURE 722.5.1(2)—GYPSUM-PROTECTED STRUCTURAL STEEL COLUMNS WITH SHEET STEEL COLUMN COVERS FIGURE 722.5.1(1)—DETERMINATION OF THE HEATED PERIMETER OF STRUCTURAL STEEL COLUMNS TABLE 722.5.1(2)—PROPERTIES OF CONCRETE FIGURE 722.5.1(2)—GYPSUM-PROTECTED STRUCTURAL STEEL COLUMNS WITH SHEET STEEL COLUMN COVERS |
| 242 | TABLE 722.5.1(3)—THERMAL CONDUCTIVITY OF CONCRETE OR CLAY MASONRY UNITS TABLE 722.5.1(3)—THERMAL CONDUCTIVITY OF CONCRETE OR CLAY MASONRY UNITS FIGURE 722.5.1(3)—GYPSUM-PROTECTED STRUCTURAL STEEL COLUMNS WITH STEEL STUD/SCREW ATTACHMENT SYSTEM |
| 243 | TABLE 722.5.1(4)—WEIGHT-TO-HEATED-PERIMETER RATIOS (W/D)FOR TYPICAL WIDE FLANGE BEAM AND GIRDER SHAPES |
| 244 | TABLE 722.5.1(4)—WEIGHT-TO-HEATED-PERIMETER RATIOS (W/D)FOR TYPICAL WIDE FLANGE BEAM AND GIRDER SHAPES—continued |
| 245 | TABLE 722.5.1(4)—WEIGHT-TO-HEATED-PERIMETER RATIOS (W/D)FOR TYPICAL WIDE FLANGE BEAM AND GIRDER SHAPES—continued |
| 246 | TABLE 722.5.1(4)—WEIGHT-TO-HEATED-PERIMETER RATIOS (W/D)FOR TYPICAL WIDE FLANGE BEAM AND GIRDER SHAPES—continued FIGURE 722.5.1(4)—FIRE RESISTANCE OF STRUCTURAL STEEL COLUMNS PROTECTED WITH VARIOUS THICKNESSES OF TYPE X GYPSUM WALLBOARD |
| 247 | TABLE 722.5.1(5)—FIRE RESISTANCE OF CONCRETE MASONRY PROTECTED STEEL COLUMNS |
| 248 | TABLE 722.5.1(5)—FIRE RESISTANCE OF CONCRETE MASONRY PROTECTED STEEL COLUMNS—continued |
| 249 | TABLE 722.5.1(5)—FIRE RESISTANCE OF CONCRETE MASONRY PROTECTED STEEL COLUMNS—continued |
| 250 | TABLE 722.5.1(5)—FIRE RESISTANCE OF CONCRETE MASONRY PROTECTED STEEL COLUMNS—continued FIGURE 722.5.1(5)—WIDE FLANGE STRUCTURAL STEEL COLUMNS WITH SPRAYED FIRE-RESISTIVE MATERIALS TABLE 722.5.1(6)—FIRE RESISTANCE OF CLAY MASONRY PROTECTED STEEL COLUMNS |
| 251 | TABLE 722.5.1(6)—FIRE RESISTANCE OF CLAY MASONRY PROTECTED STEEL COLUMNS—continued FIGURE 722.5.1(6)—CONCRETE PROTECTED STRUCTURAL STEEL COLUMNS a, b |
| 252 | TABLE 722.5.1(7)—MINIMUM COVER (inch) FOR STEEL COLUMNS ENCASED IN NORMAL-WEIGHT CONCRETEa [FIGURE 722.5.1(6)(c)] FIGURE 722.5.1(7)—CONCRETE OR CLAY MASONRY PROTECTED STRUCTURAL STEEL COLUMNS |
| 253 | TABLE 722.5.1(8)—MINIMUM COVER (inch) FOR STEEL COLUMNS ENCASED IN STRUCTURAL LIGHTWEIGHT CONCRETEa [FIGURE 722.5.1(6)(c)] TABLE 722.5.1(9)—MINIMUM COVER (inch) FOR STEEL COLUMNS IN NORMAL-WEIGHT PRECAST COVERSa [FIGURE 722.5.1 (6)(a)] |
| 254 | TABLE 722.5.1(9)—MINIMUM COVER (inch) FOR STEEL COLUMNS IN NORMAL-WEIGHT PRECAST COVERSa [FIGURE 722.5.1 (6)(a)]—continued TABLE 722.5.1(10)—MINIMUM COVER (inch) FOR STEEL COLUMNS IN STRUCTURAL LIGHTWEIGHT PRECAST COVERSa [FIGURE 722.5.1 (6)(a)] |
| 255 | TABLE 722.5.1(10)—MINIMUM COVER (inch) FOR STEEL COLUMNS IN STRUCTURAL LIGHTWEIGHT PRECAST COVERSa [FIGURE 722.5.1 (6)(a)]—continued EQUATION 7-12 EQUATION 7-13 |
| 256 | EQUATION 7-14 EQUATION 7-15 EQUATION 7-16 |
| 257 | FIGURE 722.5.2—DETERMINATION OF THE HEATED PERIMETER OF STRUCTURAL STEEL BEAMS AND GIRDERS EQUATION 7-17 |
| 258 | TABLE 722.6.2(1)—TIME ASSIGNED TO WALLBOARD MEMBRANES ON WOOD FRAMEa, b, c, d TABLE 722.6.2(2)—TIME ASSIGNED FOR CONTRIBUTION OF WOOD FRAMEa, b, c |
| 259 | TABLE 722.6.2(3)—MEMBRANEa ON EXTERIOR FACE OF WOOD STUD WALLS TABLE 722.6.2(4)—FLOORING OR ROOFING OVER WOOD FRAMINGa TABLE 722.6.2(5)—TIME ASSIGNED FOR ADDITIONAL PROTECTION |
| 260 | TABLE 722.7.1(1)—PROTECTION REQUIRED FROM NONCOMBUSTIBLE COVERING MATERIAL TABLE 722.7.1(2)—PROTECTION PROVIDED BY NONCOMBUSTIBLE COVERING MATERIAL |
| 261 | CHAPTER 8: INTERIOR FINISHES SECTION 801—SCOPE SECTION 802—GENERAL SECTION 803—WALL AND CEILING FINISHES |
| 263 | TABLE 803.13—INTERIOR WALL AND CEILING FINISH REQUIREMENTS BY OCCUPANCYk |
| 264 | SECTION 804—INTERIOR FLOOR FINISH |
| 265 | SECTION 805—COMBUSTIBLE MATERIALS IN TYPES I AND II CONSTRUCTION SECTION 806—DECORATIVE MATERIALS AND TRIM |
| 266 | SECTION 807—INSULATION SECTION 808—ACOUSTICAL CEILING SYSTEMS |
| 267 | CHAPTER 9: FIRE PROTECTION AND LIFE SAFETY SYSTEMS SECTION 901—GENERAL SECTION 902—FIRE PUMP AND RISER ROOM SIZE |
| 268 | SECTION 903—AUTOMATIC SPRINKLER SYSTEMS |
| 270 | [F] TABLE 903.2.5.2—GROUP H-5 AUTOMATIC SPRINKLER SYSTEM DESIGN CRITERIA |
| 272 | [F] TABLE 903.2.11.6—ADDITIONAL REQUIRED PROTECTION SYSTEMS |
| 275 | SECTION 904—ALTERNATIVE AUTOMATIC FIRE-EXTINGUISHING SYSTEMS |
| 278 | SECTION 905—STANDPIPE SYSTEMS |
| 280 | SECTION 906—PORTABLE FIRE EXTINGUISHERS |
| 281 | [F] TABLE 906.1—ADDITIONAL REQUIRED PORTABLE FIRE EXTINGUISHERS IN THE INTERNATIONAL FIRE CODE |
| 282 | [F] TABLE 906.1—ADDITIONAL REQUIRED PORTABLE FIRE EXTINGUISHERS IN THE INTERNATIONAL FIRE CODE—continued [F]TABLE 906.3(1)—FIRE EXTINGUISHERS FOR CLASS A FIRE HAZARDS [F]TABLE 906.3(2)—FIRE EXTINGUISHERS FOR FLAMMABLE ORCOMBUSTIBLE LIQUIDS WITH DEPTHS LESS THAN OR EQUAL TO 0.25 INCHa |
| 283 | SECTION 907—FIRE ALARM AND DETECTION SYSTEMS |
| 292 | [F] TABLE 907.5.2.3.2—VISIBLE ALARMS |
| 293 | [F] TABLE 907.5.2.3.2—VISIBLE ALARMS—continued |
| 294 | SECTION 908—EMERGENCY ALARM SYSTEMS SECTION 909—SMOKE CONTROL SYSTEMS |
| 302 | SECTION 910—SMOKE AND HEAT REMOVAL |
| 303 | SECTION 911—FIRE COMMAND CENTER |
| 305 | SECTION 912—FIRE DEPARTMENT CONNECTIONS SECTION 913—FIRE PUMPS |
| 306 | SECTION 914—EMERGENCY RESPONDER SAFETY FEATURES |
| 307 | SECTION 915—CARBON MONOXIDE (CO) DETECTION |
| 308 | SECTION 916—GAS DETECTION SYSTEMS |
| 309 | SECTION 917—MASS NOTIFICATION SYSTEMS SECTION 918—EMERGENCY RESPONDER COMMUNICATION COVERAGE |
| 310 | CHAPTER 10: MEANS OF EGRESS SECTION 1001—ADMINISTRATION SECTION 1002—MAINTENANCE AND PLANS SECTION 1003—GENERAL MEANS OF EGRESS |
| 311 | SECTION 1004—OCCUPANT LOAD |
| 312 | TABLE 1004.5—MAXIMUM FLOOR AREA ALLOWANCES PER OCCUPANT |
| 313 | TABLE 1004.5—MAXIMUM FLOOR AREA ALLOWANCES PER OCCUPANT—continued SECTION 1005—MEANS OF EGRESS SIZING |
| 315 | SECTION 1006—NUMBER OF EXITS AND EXIT ACCESS DOORWAYS TABLE 1006.2.1—SPACES WITH ONE EXIT OR EXIT ACCESS DOORWAY |
| 317 | TABLE 1006.3.3—MINIMUM NUMBER OF EXITS OR ACCESS TO EXITS PER STORY OR OCCUPIABLE ROOFS TABLE 1006.3.4(1)—STORIES AND OCCUPIABLE ROOFS WITH ONE EXIT OR ACCESS TO ONE EXIT FOR R-2 OCCUPANCIES TABLE 1006.3.4(2)—STORIES AND OCCUPIABLE ROOFS WITH ONE EXIT OR ACCESS TO ONE EXIT FOR OTHER OCCUPANCIES |
| 318 | SECTION 1007—EXIT AND EXIT ACCESS DOORWAY CONFIGURATION SECTION 1008 —MEANS OF EGRESS ILLUMINATION |
| 319 | SECTION 1009—ACCESSIBLE MEANS OF EGRESS |
| 322 | SECTION 1010—DOORS, GATES AND TURNSTILES |
| 325 | TABLE 1010.2.4—MANUAL BOLTS, AUTOMATIC FLUSH BOLTS AND CONSTANT LATCHING BOLTS ON THE INACTIVE LEAF OF A PAIR OF DOORS |
| 326 | TABLE 1010.2.4—MANUAL BOLTS, AUTOMATIC FLUSH BOLTS AND CONSTANT LATCHING BOLTS ON THE INACTIVE LEAF OF A PAIR OF DOORS—continued |
| 329 | TABLE 1010.3.1(1)—MAXIMUM DOOR SPEED MANUAL REVOLVING DOORS |
| 330 | TABLE 1010.3.1(2)—MAXIMUM DOOR SPEED AUTOMATIC OR POWER-OPERATED REVOLVING DOORS |
| 332 | SECTION 1011—STAIRWAYS |
| 335 | SECTION 1012—RAMPS |
| 337 | SECTION 1013—EXIT SIGNS |
| 338 | SECTION 1014—HANDRAILS |
| 339 | SECTION 1015—GUARDS |
| 341 | SECTION 1016—EXIT ACCESS |
| 342 | SECTION 1017—EXIT ACCESS TRAVEL DISTANCE TABLE 1017.2—EXIT ACCESS TRAVEL DISTANCEa |
| 343 | SECTION 1018—AISLES |
| 344 | SECTION 1019—EXIT ACCESS STAIRWAYS AND RAMPS SECTION 1020—CORRIDORS |
| 345 | TABLE 1020.2—CORRIDOR FIRE-RESISTANCE RATING TABLE 1020.3—MINIMUM CORRIDOR WIDTH |
| 346 | SECTION 1021—EGRESS BALCONIES SECTION 1022—EXITS |
| 347 | SECTION 1023—INTERIOR EXIT STAIRWAYS AND RAMPS |
| 349 | SECTION 1024—EXIT PASSAGEWAYS |
| 350 | SECTION 1025—LUMINOUS EGRESS PATH MARKINGS |
| 351 | SECTION 1026—HORIZONTAL EXITS |
| 352 | SECTION 1027—EXTERIOR EXIT STAIRWAYS AND RAMPS |
| 353 | SECTION 1028—EXIT DISCHARGE |
| 354 | SECTION 1029—EGRESS COURTS SECTION 1030—ASSEMBLY |
| 355 | TABLE 1030.6.2—CAPACITY FOR AISLES FOR SMOKE-PROTECTED ASSEMBLY |
| 358 | TABLE 1030.13.2.1—SMOKE-PROTECTED OR OPEN-AIR ASSEMBLY AISLE ACCESSWAYS |
| 359 | TABLE 1030.13.2.1—SMOKE-PROTECTED OR OPEN-AIR ASSEMBLY AISLE ACCESSWAYS—continued |
| 361 | SECTION 1031—EMERGENCY ESCAPE AND RESCUE |
| 363 | CHAPTER 11: ACCESSIBILITY SECTION 1101—GENERAL SECTION 1102—COMPLIANCE SECTION 1103—SCOPING REQUIREMENTS |
| 364 | SECTION 1104—ACCESSIBLE ROUTE |
| 365 | SECTION 1105—ACCESSIBLE ENTRANCES TABLE 1105.1.1—PUBLIC ENTRANCE WITH POWER-OPERATED DOOR |
| 366 | SECTION 1106—PARKING AND PASSENGER LOADING FACILITIES TABLE 1106.2—ACCESSIBLE PARKING SPACES |
| 367 | SECTION 1107—MOTOR-VEHICLE-RELATED FACILITIES SECTION 1108—DWELLING UNITS AND SLEEPING UNITS |
| 369 | TABLE 1108.6.1.1—ACCESSIBLE DWELLING UNITS AND SLEEPING UNITS |
| 370 | TABLE 1108.6.1.1—ACCESSIBLE DWELLING UNITS AND SLEEPING UNITS—continued |
| 372 | SECTION 1109—SPECIAL OCCUPANCIES TABLE 1109.2.2.1—ACCESSIBLE WHEELCHAIR SPACES |
| 373 | TABLE 1109.2.7.1—RECEIVERS FOR ASSISTIVE LISTENING SYSTEMS TABLE 1109.3—ACCESSIBLE SELF-SERVICE STORAGE FACILITIES |
| 374 | SECTION 1110—OTHER FEATURES AND FACILITIES |
| 378 | TABLE 1110.16.1—ACCESSIBLE CHECKOUT AISLES |
| 379 | SECTION 1111—RECREATIONAL FACILITIES |
| 380 | TABLE 1111.4.9.1—BOAT SLIPS |
| 381 | SECTION 1112—SIGNAGE |
| 383 | CHAPTER 12: INTERIOR ENVIRONMENT SECTION 1201—GENERAL SECTION 1202—VENTILATION |
| 384 | TABLE 1202.3—INSULATION FOR CONDENSATION CONTROL |
| 385 | TABLE 1202.3—INSULATION FOR CONDENSATION CONTROL—continued |
| 386 | SECTION 1203—TEMPERATURE CONTROL SECTION 1204—LIGHTING SECTION 1205—YARDS OR COURTS |
| 387 | SECTION 1206—SOUND TRANSMISSION SECTION 1207—ENHANCED CLASSROOM ACOUSTICS SECTION 1208—INTERIOR SPACE DIMENSIONS |
| 388 | SECTION 1209—ACCESS TO UNOCCUPIED SPACES SECTION 1210—TOILET AND BATHROOM REQUIREMENTS |
| 389 | SECTION 1211—UV GERMICIDAL IRRADIATION SYSTEMS |
| 390 | CHAPTER 13: ENERGY EFFICIENCY SECTION 1301—GENERAL |
| 391 | CHAPTER 14: EXTERIOR WALLS SECTION 1401—GENERAL SECTION 1402—PERFORMANCE REQUIREMENTS |
| 392 | SECTION 1403—MATERIALS |
| 394 | SECTION 1404—INSTALLATION OF WALL COVERINGS TABLE 1404.2—MINIMUM THICKNESS OF WEATHER COVERINGS |
| 395 | TABLE 1404.2—MINIMUM THICKNESS OF WEATHER COVERINGS—continued TABLE 1404.3(1)—VAPOR RETARDER MATERIALS AND CLASSES TABLE 1404.3(2)—VAPOR RETARDER OPTIONS TABLE 1404.3(3)—CLASS III VAPOR RETARDERS |
| 396 | TABLE 1404.3(3)—CLASS III VAPOR RETARDERS—continued TABLE 1404.3(4)—CONTINUOUS INSULATION WITH A CLASS I OR II RESPONSIVE VAPOR RETARDER TABLE 1404.3(5)—CONTINUOUS INSULATION ON WALLS WITHOUT A CLASS I, II, OR III INTERIOR VAPOR RETARDERa |
| 398 | [BS] TABLE 1404.5.2.1—CLADDING MINIMUM FASTENING REQUIREMENTS FOR DIRECT ATTACHMENT OVER FOAM PLASTIC SHEATHING TO SUPPORT CLADDING WEIGHTa [BS] TABLE 1404.5.2.2—FURRING MINIMUM FASTENING REQUIREMENTS FOR APPLICATION OVER FOAM PLASTIC SHEATHING TO SUPPORT CLADDING WEIGHTa |
| 399 | [BS] TABLE 1404.5.3.1—CLADDING MINIMUM FASTENING REQUIREMENTS FOR DIRECT ATTACHMENT OVER FOAM PLASTIC SHEATHING TO SUPPORT CLADDING WEIGHTa |
| 400 | [BS] TABLE 1404.5.3.2—FURRING MINIMUM FASTENING REQUIREMENTS FOR APPLICATION OVER FOAM PLASTIC SHEATHING TO SUPPORT CLADDING WEIGHTa, b |
| 403 | [BS] TABLE 1404.15.2—REQUIRED MINIMUM WIND LOAD DESIGN PRESSURE RATING FOR VINYL SIDING INSTALLED OVER FOAM PLASTIC SHEATHING ALONE |
| 404 | [BS] TABLE 1404.15.2—REQUIRED MINIMUM WIND LOAD DESIGN PRESSURE RATING FOR VINYL SIDING INSTALLED OVER FOAM PLASTIC SHEATHING ALONE—continued [BS] TABLE 1404.15.2—REQUIRED MINIMUM WIND LOAD DESIGN PRESSURE RATING FOR VINYL SIDING INSTALLED OVER FOAM PLASTIC SHEATHING ALONE—continued |
| 405 | SECTION 1405—COMBUSTIBLE MATERIALS ON THE EXTERIOR SIDE OF EXTERIOR WALLS TABLE 1405.1.1.1.2—MINIMUM FIRE SEPARATION FOR COMBUSTIBLE EXTERIOR WALL COVERINGS |
| 406 | TABLE 1405.1.1.1.2—MINIMUM FIRE SEPARATION FOR COMBUSTIBLE EXTERIOR WALL COVERINGS—continued SECTION 1406—METAL COMPOSITE MATERIAL (MCM) |
| 407 | SECTION 1407—EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) SECTION 1408—HIGH-PRESSURE DECORATIVE EXTERIOR-GRADE COMPACT LAMINATES (HPL) |
| 408 | SECTION 1409—INSULATED METAL PANEL (IMP) |
| 410 | SECTION 1410—PLASTIC COMPOSITE DECKING SECTION 1411—BUILDING-INTEGRATED PHOTOVOLTAIC (BIPV) SYSTEMS FOR EXTERIOR WALL COVERINGS AND FENESTRATION SECTION 1412—SOFFITS AND FASCIAS AT ROOF OVERHANGS FIGURE 1412.3(1)—SINGLE-SPAN VINYL OR ALUMINUM SOFFIT PANEL SUPPORTFor SI: |
| 411 | FIGURE 1412.3(2)—DOUBLE-SPAN VINYL OR ALUMINUM SOFFIT PANEL SUPPORT TABLE 1412.6—PRESCRIPTIVE ALTERNATE FOR WOOD STRUCTURAL PANEL SOFFITb, c, d, e |
| 412 | TABLE 1412.6—PRESCRIPTIVE ALTERNATE FOR WOOD STRUCTURAL PANEL SOFFITb, c, d, e—continued |
| 413 | CHAPTER 15: ROOF ASSEMBLIES AND ROOFTOP STRUCTURES SECTION 1501—GENERAL SECTION 1502—ROOF DRAINAGE SECTION 1503—WEATHER PROTECTION |
| 414 | SECTION 1504—PERFORMANCE REQUIREMENTS TABLE 1504.2—CLASSIFICATION OF STEEP SLOPE ROOF SHINGLES TESTED IN ACCORDANCE WITH ASTM D3161 OR D7158 |
| 415 | TABLE 1504.8—MINIMUM REQUIRED PARAPET HEIGHT (INCHES) FOR AGGREGATE SURFACED ROOFSa, b, c, d, e SECTION 1505—FIRE CLASSIFICATION |
| 416 | [BF] TABLE 1505.1—MINIMUM ROOF ASSEMBLY CLASSIFICATION FOR TYPES OF CONSTRUCTIONa, b SECTION 1506—MATERIALS |
| 417 | SECTION 1507—REQUIREMENTS FOR ROOF COVERINGS TABLE 1507.1.1(1)—UNDERLAYMENT TYPES |
| 418 | TABLE 1507.1.1(2)—UNDERLAYMENT APPLICATION |
| 419 | TABLE 1507.1.1(2)—UNDERLAYMENT APPLICATION—continued |
| 420 | TABLE 1507.1.1(3)—UNDERLAYMENT FASTENING |
| 421 | TABLE 1507.2.8.2—VALLEY LINING MATERIAL |
| 422 | TABLE 1507.3.7—CLAY AND CONCRETE TILE ATTACHMENTa, b, c |
| 423 | TABLE 1507.3.7—CLAY AND CONCRETE TILE ATTACHMENTa, b, c—continued TABLE 1507.4.3—METAL ROOF COVERINGS |
| 424 | TABLE 1507.4.3—METAL ROOF COVERINGS—continued |
| 425 | TABLE 1507.7.6—SLATE SHINGLE HEADLAP TABLE 1507.8—WOOD SHINGLE AND SHAKE INSTALLATION |
| 426 | TABLE 1507.8.5—WOOD SHINGLE MATERIAL REQUIREMENTS TABLE 1507.8.7—WOOD SHINGLE WEATHER EXPOSURE AND ROOF SLOPE |
| 427 | TABLE 1507.9.6—WOOD SHAKE MATERIAL REQUIREMENTS TABLE 1507.9.8—WOOD SHAKE WEATHER EXPOSURE AND ROOF SLOPE |
| 428 | TABLE 1507.10.2—BUILT-UP ROOFING MATERIAL STANDARDS |
| 429 | TABLE 1507.12.2—SINGLE-PLY ROOFING MATERIAL STANDARDS TABLE 1507.13.3—PROTECTIVE COATING MATERIAL STANDARDS |
| 430 | SECTION 1508—ROOF INSULATION [BF] TABLE 1508.2—MATERIAL STANDARDS FOR ROOF INSULATION |
| 431 | [BF] TABLE 1508.2—MATERIAL STANDARDS FOR ROOF INSULATION—continued SECTION 1509—ROOF COATINGS TABLE 1509.2—ROOF COATING MATERIAL STANDARDS SECTION 1510—RADIANT BARRIERS INSTALLED ABOVE DECK SECTION 1511—ROOFTOP STRUCTURES |
| 434 | SECTION 1512—REROOFING |
| 436 | CHAPTER 16: STRUCTURAL DESIGN SECTION 1601—GENERAL SECTION 1602—NOTATIONS SECTION 1603—CONSTRUCTION DOCUMENTS |
| 438 | SECTION 1604—GENERAL DESIGN REQUIREMENTS TABLE 1604.3—DEFLECTION LIMITSa, b, c, h, i |
| 439 | TABLE 1604.3—DEFLECTION LIMITSa, b, c, h, i—continued |
| 440 | TABLE 1604.5—RISK CATEGORY OF BUILDINGS AND OTHER STRUCTURES |
| 441 | SECTION 1605—LOAD COMBINATIONS |
| 442 | EQUATION 16-1 EQUATION 16-2 EQUATION 16-3 EQUATION 16-4 EQUATION 16-5 EQUATION 16-6 SECTION 1606—DEAD LOADS SECTION 1607—LIVE LOADS |
| 443 | TABLE 1607.1—MINIMUM UNIFORMLY DISTRIBUTED LIVE LOADS, L0, AND MINIMUM CONCENTRATED LIVE LOADS |
| 444 | TABLE 1607.1—MINIMUM UNIFORMLY DISTRIBUTED LIVE LOADS, L0, AND MINIMUM CONCENTRATED LIVE LOADS—continued |
| 445 | TABLE 1607.1—MINIMUM UNIFORMLY DISTRIBUTED LIVE LOADS, L0, AND MINIMUM CONCENTRATED LIVE LOADS—continued |
| 447 | EQUATION 16-7 |
| 448 | TABLE 1607.13.1—LIVE LOAD ELEMENT FACTOR, KLL EQUATION 16-8 EQUATION 16-9 |
| 449 | EQUATION 16-10 EQUATION 16-11 EQUATION 16-12 EQUATION 16-13 EQUATION 16-14 EQUATION 16-15 EQUATION 16-16 |
| 451 | SECTION 1608—SNOW LOADS TABLE 1608.2—GROUND SNOW LOADS, pg, FOR ALASKAN LOCATIONS |
| 452 | TABLE 1608.2—GROUND SNOW LOADS, pg, FOR ALASKAN LOCATIONS—continued |
| 453 | FIGURE 1608.2(1)—GROUND SNOW LOADS, pg, FOR RISK CATEGORY I FOR THE CONTERMINOUS UNITED STATES (lb/ft2) |
| 454 | FIGURE 1608.2(2)—GROUND SNOW LOADS, pg, FOR RISK CATEGORY II FOR THE CONTERMINOUS UNITED STATES (lb/ft2) |
| 455 | FIGURE 1608.2(3)—GROUND SNOW LOADS, pg, FOR RISK CATEGORY III FOR THE CONTERMINOUS UNITED STATES (lb/ft2) |
| 456 | FIGURE 1608.2(4)—GROUND SNOW LOADS, pg, FOR RISK CATEGORY IV FOR THE CONTERMINOUS UNITED STATES (lb/ft2) |
| 457 | EQUATION 16-17 SECTION 1609—WIND LOADS |
| 458 | TABLE 1609.2—WINDBORNE DEBRIS PROTECTION FASTENING SCHEDULE FOR WOOD STRUCTURAL PANELSa, b, c, d |
| 459 | FIGURE 1609.3(1)—BASIC WIND SPEEDS, V, FOR RISK CATEGORY I BUILDINGS AND OTHER STRUCTURES |
| 460 | FIGURE 1609.3(2)—BASIC WIND SPEEDS, V, FOR RISK CATEGORY II BUILDINGS AND OTHER STRUCTURES |
| 461 | FIGURE 1609.3(3)—BASIC WIND SPEEDS, V, FOR RISK CATEGORY III BUILDINGS AND OTHER STRUCTURES |
| 462 | FIGURE 1609.3(4)—BASIC WIND SPEEDS, V, FOR RISK CATEGORY IV BUILDINGS AND OTHER STRUCTURES TABLE 1609.3.1—WIND SPEED CONVERSIONSa, b, c |
| 463 | FIGURE 1609.5—TORNADO-PRONE REGION |
| 465 | SECTION 1610—SOIL LOADS AND HYDROSTATIC PRESSURE TABLE 1610.1—LATERAL SOIL LOAD SECTION 1611—RAIN LOADS |
| 466 | EQUATION 16-20 TABLE 1611.1—DESIGN STORM RETURN PERIOD BY RISK CATEGORY SECTION 1612—FLOOD LOADS |
| 467 | SECTION 1613—EARTHQUAKE LOADS |
| 468 | FIGURE 1613.2(1)—SEISMIC DESIGN CATEGORIES FOR DEFAULT SITE CONDITIONS FOR THE CONTERMINOUS UNITED STATES (WESTERN) |
| 469 | FIGURE 1613.2(2)—SEISMIC DESIGN CATEGORIES FOR DEFAULT SITE CONDITIONS FOR THE CONTERMINOUS UNITED STATES (EASTERN) |
| 470 | FIGURE 1613.2(3)—SEISMIC DESIGN CATEGORIES FOR DEFAULT SITE CONDITIONS FOR ALASKA FIGURE 1613.2(4)—SEISMIC DESIGN CATEGORIES FOR DEFAULT SITE CONDITIONS FOR HAWAII |
| 471 | FIGURE 1613.2(5)—SEISMIC DESIGN CATEGORIES FOR DEFAULT SITE CONDITIONS FOR PUERTO RICO AND THE UNITED STATES VIRGIN ISLANDS FIGURE 1613.2(6)—SEISMIC DESIGN CATEGORIES FOR DEFAULT SITE CONDITIONS FOR GUAM AND THE NORTHERN MARIANA ISLANDS |
| 472 | FIGURE 1613.2(7)—SEISMIC DESIGN CATEGORIES FOR DEFAULT SITE CONDITIONS FOR AMERICAN SAMOA SECTION 1614—ATMOSPHERIC ICE LOADS |
| 473 | SECTION 1615—TSUNAMI LOADS SECTION 1616—STRUCTURAL INTEGRITY FIGURE 1616.3—LONGITUDINAL, PERIMETER, TRANSVERSE AND VERTICAL TIES |
| 474 | EQUATION 16-21 EQUATION 16-22 |
| 475 | CHAPTER 17: SPECIAL INSPECTIONS AND TESTS SECTION 1701—GENERAL SECTION 1702—NEW MATERIALS SECTION 1703—APPROVALS |
| 476 | SECTION 1704—SPECIAL INSPECTIONS AND TESTS, CONTRACTOR RESPONSIBILITY AND STRUCTURAL OBSERVATION |
| 478 | SECTION 1705—REQUIRED SPECIAL INSPECTIONS AND TESTS TABLE 1705.2.4—REQUIRED SPECIAL INSPECTIONS OF OPEN-WEB STEEL JOISTS AND JOIST GIRDERS |
| 479 | TABLE 1705.2.6—SPECIAL INSPECTIONS OF METAL BUILDING SYSTEMS TABLE 1705.3—REQUIRED SPECIAL INSPECTIONS AND TESTS OF CONCRETE CONSTRUCTION |
| 480 | TABLE 1705.3—REQUIRED SPECIAL INSPECTIONS AND TESTS OF CONCRETE CONSTRUCTION—continued |
| 481 | TABLE 1705.5.3—REQUIRED SPECIAL INSPECTIONS OF MASS TIMBER CONSTRUCTION TABLE 1705.6—REQUIRED SPECIAL INSPECTIONS AND TESTS OF SOILS |
| 482 | TABLE 1705.7—REQUIRED SPECIAL INSPECTIONS AND TESTS OF DRIVEN DEEP FOUNDATION ELEMENTS TABLE 1705.8—REQUIRED SPECIAL INSPECTIONS AND TESTS OF CAST-IN-PLACE DEEP FOUNDATION ELEMENTS |
| 485 | TABLE 1705.13.7—REQUIRED INSPECTIONS OF STORAGE RACK SYSTEMS |
| 487 | SECTION 1706—DESIGN STRENGTHS OF MATERIALS SECTION 1707—ALTERNATIVE TEST PROCEDURE |
| 488 | SECTION 1708—IN-SITU LOAD TESTS SECTION 1709—PRECONSTRUCTION LOAD TESTS |
| 490 | CHAPTER 18: SOILS AND FOUNDATIONS SECTION 1801—GENERAL SECTION 1802—DESIGN BASIS SECTION 1803—GEOTECHNICAL INVESTIGATIONS |
| 492 | SECTION 1804—EXCAVATION, GRADING AND FILL |
| 493 | SECTION 1805—DAMPPROOFING AND WATERPROOFING |
| 495 | SECTION 1806—PRESUMPTIVE LOAD-BEARING VALUES OF SOILS TABLE 1806.2—PRESUMPTIVE LOAD-BEARING VALUES SECTION 1807—FOUNDATION WALLS, RETAINING WALLS AND EMBEDDED POSTS AND POLES |
| 496 | TABLE 1807.1.6.2—CONCRETE FOUNDATION WALLSb, c |
| 497 | TABLE 1807.1.6.2—CONCRETE FOUNDATION WALLSb, c—continued |
| 498 | TABLE 1807.1.6.3(1)—PLAIN MASONRY FOUNDATION WALLSa, b, c TABLE 1807.1.6.3(2)—8-INCH MASONRY FOUNDATION WALLS WITH REINFORCEMENT WHERE d ≥ 5 INCHESa, b, c |
| 499 | TABLE 1807.1.6.3(2)—8-INCH MASONRY FOUNDATION WALLS WITH REINFORCEMENT WHERE d ≥ 5 INCHESa, b, c—continued TABLE 1807.1.6.3(3)—10-INCH MASONRY FOUNDATION WALLS WITH REINFORCEMENT WHERE d ≥ 6.75 INCHESa, b, c |
| 500 | TABLE 1807.1.6.3(4)—12-INCH MASONRY FOUNDATION WALLS WITH REINFORCEMENT WHERE d ≥ 8.75 INCHESa, b, c |
| 501 | EQUATION 18-1 EQUATION 18-2 EQUATION 18-3 |
| 502 | SECTION 1808—FOUNDATIONS |
| 503 | FIGURE 1808.7.1—FOUNDATION CLEARANCES FROM SLOPES TABLE 1808.8.1—MINIMUM SPECIFIED COMPRESSIVE STRENGTH f′c OF CONCRETE OR GROUT |
| 504 | TABLE 1808.8.1—MINIMUM SPECIFIED COMPRESSIVE STRENGTH f′c OF CONCRETE OR GROUT—continued TABLE 1808.8.2—MINIMUM CONCRETE COVER |
| 505 | SECTION 1809—SHALLOW FOUNDATIONS TABLE 1809.7—PRESCRIPTIVE FOOTINGS SUPPORTING WALLS OF LIGHT-FRAME CONSTRUCTIONa, b, c, d, e |
| 506 | SECTION 1810—DEEP FOUNDATIONS |
| 508 | TABLE 1810.3.2.6—ALLOWABLE STRESSES FOR MATERIALS USED IN DEEP FOUNDATION ELEMENTS |
| 509 | TABLE 1810.3.2.6—ALLOWABLE STRESSES FOR MATERIALS USED IN DEEP FOUNDATION ELEMENTS—continued |
| 512 | EQUATION 18-5 |
| 518 | CHAPTER 19: CONCRETE SECTION 1901—GENERAL |
| 519 | SECTION 1902—COORDINATION OF TERMINOLOGY SECTION 1903—SPECIFICATIONS FOR TESTS AND MATERIALS SECTION 1904—DURABILITY REQUIREMENTS SECTION 1905—SEISMIC REQUIREMENTS |
| 521 | SECTION 1906—FOOTINGS FOR LIGHT-FRAME CONSTRUCTION SECTION 1907—SLABS-ON-GROUND SECTION 1908—SHOTCRETE |
| 522 | CHAPTER 20: ALUMINUM SECTION 2001—GENERAL SECTION 2002—MATERIALS |
| 523 | CHAPTER 21: MASONRY SECTION 2101—GENERAL SECTION 2102—NOTATIONS SECTION 2103—MASONRY CONSTRUCTION MATERIALS |
| 524 | TABLE 2103.2.3—CERAMIC TILE MORTAR COMPOSITIONS SECTION 2104—CONSTRUCTION SECTION 2105—QUALITY ASSURANCE SECTION 2106—SEISMIC DESIGN |
| 525 | SECTION 2107—ALLOWABLE STRESS DESIGN SECTION 2108—STRENGTH DESIGN OF MASONRY SECTION 2109—EMPIRICAL DESIGN OF ADOBE MASONRY |
| 526 | TABLE 2109.2.3.1—ALLOWABLE SHEAR ON BOLTS IN ADOBE MASONRY |
| 527 | SECTION 2110—GLASS UNIT MASONRY |
| 528 | SECTION 2111—MASONRY FIREPLACES |
| 530 | FIGURE 2111.12—ILLUSTRATION OF EXCEPTION TO FIREPLACE CLEARANCE PROVISION SECTION 2112—MASONRY HEATERS |
| 531 | SECTION 2113—MASONRY CHIMNEYS |
| 533 | FIGURE 2113.16—FLUE SIZES FOR MASONRY CHIMNEYS |
| 534 | TABLE 2113.16(1)—NET CROSS-SECTIONAL AREA OF ROUND FLUE SIZESa TABLE 2113.16(2)—NET CROSS-SECTIONAL AREA OF SQUARE AND RECTANGULAR FLUE SIZES |
| 535 | FIGURE 2113.19—ILLUSTRATION OF EXCEPTION THREE CHIMNEY CLEARANCE PROVISION SECTION 2114—DRY-STACK MASONRY TABLE 2114.4—GROSS CROSS-SECTIONAL AREA ALLOWABLE STRESS FOR DRY-STACK MASONRY |
| 536 | CHAPTER 22: STEEL SECTION 2201—GENERAL SECTION 2202—STRUCTURAL STEEL AND COMPOSITE STRUCTURAL STEEL AND CONCRETE |
| 537 | SECTION 2203—STRUCTURAL STAINLESS STEEL SECTION 2204—COLD-FORMED STEEL SECTION 2205—COLD-FORMED STAINLESS STEEL SECTION 2206—COLD-FORMED STEEL LIGHT-FRAME CONSTRUCTION |
| 538 | SECTION 2207—STEEL JOISTS |
| 539 | SECTION 2208—STEEL DECK SECTION 2209—STEEL STORAGE RACKS SECTION 2210—METAL BUILDING SYSTEMS SECTION 2211—INDUSTRIAL BOLTLESS STEEL SHELVING SECTION 2212—INDUSTRIAL STEEL WORK PLATFORMS SECTION 2213—STAIRS, LADDERS AND GUARDING FOR STEEL STORAGE RACKS AND INDUSTRIAL STEEL WORK PLATFORMS SECTION 2214—STEEL CABLE STRUCTURES |
| 540 | CHAPTER 23: WOOD SECTION 2301—GENERAL SECTION 2302—DESIGN REQUIREMENTS SECTION 2303—MINIMUM STANDARDS AND QUALITY |
| 544 | FIGURE 2303.4.1.2 (1)—PITMR AND PITMDB FOR TRUSS WEB MEMBERS REQUIRING ONE ROW OF PITMR FIGURE 2303.4.1.2(2)—ALTERNATIVE INSTALLATION USING BUCKLING REINFORCEMENT FOR TRUSS WEB MEMBERS IN LIEU OF ONE ROW OF PITMR |
| 545 | FIGURE 2303.4.1.2(3)—PITMR AND PITMDB FOR TRUSS WEB MEMBERS REQUIRING TWO ROWS OF PITMR FIGURE 2303.4.1.2(4)—ALTERNATIVE INSTALLATION USING BUCKLINGREINFORCEMENT FOR TRUSS WEB MEMBERS IN LIEU OF TWO ROWS OF PITMR |
| 546 | FIGURE 2303.4.1.2(5)—PITMR AND PITMDB FOR FLAT PORTION OF TOP CHORD IN A PIGGYBACK ASSEMBLY |
| 547 | SECTION 2304—GENERAL CONSTRUCTION REQUIREMENTS |
| 548 | TABLE 2304.6.1—MAXIMUM BASIC WIND SPEED, V, PERMITTED FOR WOOD STRUCTURAL PANEL WALL SHEATHING USED TO RESIST WIND PRESSURESa, b, c |
| 549 | TABLE 2304.8(1)—ALLOWABLE SPANS FOR LUMBER FLOOR AND ROOF SHEATHING TABLE 2304.8(2)—SHEATHING LUMBER, MINIMUM GRADE REQUIREMENTS: BOARD GRADE TABLE 2304.8(3)—ALLOWABLE SPANS AND LOADS FOR WOOD STRUCTURAL PANEL SHEATHING AND SINGLE-FLOOR GRADES CONTINUOUS OVER TWO OR MORE SPANS WITH STRENGTH AXIS PERPENDICULAR TO SUPPORTSa |
| 550 | TABLE 2304.8(3)—ALLOWABLE SPANS AND LOADS FOR WOOD STRUCTURAL PANEL SHEATHING AND SINGLE-FLOOR GRADES CONTINUOUS OVER TWO OR MORE SPANS WITH STRENGTH AXIS PERPENDICULAR TO SUPPORTSa—continued TABLE 2304.8(4)—ALLOWABLE SPAN FOR WOOD STRUCTURAL PANEL COMBINATION SUBFLOOR-UNDERLAYMENT (SINGLE FLOOR)a(Panels Continuous Over Two or More Spans and Strength Axis Perpendicular to Supports) TABLE 2304.8(5)—ALLOWABLE LOAD (PSF) FOR WOOD STRUCTURAL PANEL ROOF SHEATHING CONTINUOUS OVER TWO OR MORE SPANS AND STRENGTH AXIS PARALLEL TO SUPPORTS(Plywood structural panels are five-ply, five-layer unless otherwise noted)a |
| 551 | TABLE 2304.9.3.2—FASTENING SCHEDULE FOR MECHANICALLY LAMINATED DECKING USING LAMINATIONS OF 2-INCH NOMINAL THICKNESS |
| 552 | TABLE 2304.9.3.2—FASTENING SCHEDULE FOR MECHANICALLY LAMINATED DECKING USING LAMINATIONS OF 2-INCH NOMINAL THICKNESS—continued |
| 553 | TABLE 2304.10.2—FASTENING SCHEDULE |
| 554 | TABLE 2304.10.2—FASTENING SCHEDULE—continued |
| 555 | TABLE 2304.10.2—FASTENING SCHEDULE—continued |
| 556 | TABLE 2304.10.2—FASTENING SCHEDULE—continued |
| 557 | TABLE 2304.10.2—FASTENING SCHEDULE—continued |
| 558 | TABLE 2304.11—MINIMUM DIMENSIONS OF HEAVY TIMBER STRUCTURAL MEMBERSMINIMUM NOMINALSOLID SAWN SIZEMINIMUM GLUEDLAMINATEDNET SIZEMINIMUM |
| 560 | SECTION 2305—GENERAL DESIGN REQUIREMENTS FOR LATERAL FORCE-RESISTING SYSTEMS EQUATION 23-1 |
| 561 | TABLE 2305.2(1)—en VALUES (inches) FOR USE IN CALCULATINGDIAPHRAGM AND SHEAR WALL DEFLECTION DUE TO FASTENER SLIP (Structural I)a, c TABLE 2305.2(2)—VALUES OF Gt FOR USE IN CALCULATING DEFLECTION OF WOOD STRUCTURAL PANEL SHEAR WALLS AND DIAPHRAGMS |
| 562 | TABLE 2305.2(2)—VALUES OF Gt FOR USE IN CALCULATING DEFLECTION OF WOOD STRUCTURAL PANEL SHEAR WALLS AND DIAPHRAGMS—continued EQUATION 23-2 SECTION 2306—ALLOWABLE STRESS DESIGN TABLE 2306.1—STANDARDS FOR DESIGN AND CONSTRUCTION OFWOOD ELEMENTS IN STRUCTURES USING ALLOWABLE STRESS DESIGN |
| 563 | TABLE 2306.1—STANDARDS FOR DESIGN AND CONSTRUCTION OF WOOD ELEMENTS IN STRUCTURES USING ALLOWABLE STRESS DESIGN—continued TABLE 2306.1.5—ALLOWABLE LOADS FOR LUMBER DECKING |
| 564 | TABLE 2306.1.5—ALLOWABLE LOADS FOR LUMBER DECKING—continued |
| 565 | TABLE 2306.2(1)—ALLOWABLE SHEAR VALUES (POUNDS PER FOOT) FOR WOOD STRUCTURAL PANEL DIAPHRAGMS UTILIZING STAPLES WITH FRAMING OF DOUGLAS FIR-LARCH, OR SOUTHERN PINEa FOR WIND OR SEISMIC LOADINGf FIGURE 2306.2(1)—CASES 1 THROUGH 6 FOR USE WITH TABLE 2306.2(1) |
| 566 | TABLE 2306.2(2)—ALLOWABLE SHEAR VALUES (POUNDS PER FOOT) FOR WOOD STRUCTURAL PANEL BLOCKED DIAPHRAGMS UTILIZING MULTIPLE ROWS OF STAPLES (HIGH-LOAD DIAPHRAGMS)WITH FRAMING OF DOUGLAS FIR-LARCH OR SOUTHERN PINEa FOR WIND OR SEISMIC LOADINGb, g, h FIGURE 2306.2(2)—FASTENER SPACING DIAGRAMS FOR USE WITH TABLE 2306.2(2) |
| 567 | TABLE 2306.3(1)—ALLOWABLE SHEAR VALUES (POUNDS PER FOOT)FOR WOOD STRUCTURAL PANEL SHEAR WALLS UTILIZING STAPLES WITH FRAMING OF DOUGLAS FIR-LARCH OR SOUTHERN PINEa FOR WIND OR SEISMIC LOADINGb, f, g, i TABLE 2306.3(2)—ALLOWABLE SHEAR VALUES (plf) FOR WIND OR SEISMIC LOADING ON SHEAR WALLS OF FIBERBOARD SHEATHING BOARD CONSTRUCTION UTILIZING STAPLES FOR TYPE V CONSTRUCTION ONLYa, b, c, d, e |
| 568 | TABLE 2306.3(3)—ALLOWABLE SHEAR VALUES FOR WIND OR SEISMIC FORCES FOR SHEAR WALLS OF LATH AND PLASTER OR GYPSUM BOARD WOOD FRAMED WALL ASSEMBLIES UTILIZING STAPLES SECTION 2307—LOAD AND RESISTANCE FACTOR DESIGN SECTION 2308—CONVENTIONAL LIGHT-FRAME CONSTRUCTION |
| 569 | TABLE 2308.2.1—ALLOWABLE STORY HEIGHT |
| 571 | TABLE 2308.8.1.1(1)—HEADER AND GIRDER SPANSa, b FOR EXTERIOR BEARING WALLS(Maximum spans for Douglas fir-larch, hem-fir, Southern pine and spruce-pine-fir and required number of jack studs) |
| 572 | TABLE 2308.8.1.1(1)—HEADER AND GIRDER SPANSa, b FOR EXTERIOR BEARING WALLS(Maximum spans for Douglas fir-larch, hem-fir, Southern pine and spruce-pine-fir and required number of jack studs)—continued |
| 573 | TABLE 2308.8.1.1(2)—HEADER AND GIRDER SPANSa, b FOR INTERIOR BEARING WALLS(Maximum spans for Douglas fir-larch, hem-fir, Southern pine and spruce-pine-fir and required number of jack studs) |
| 574 | TABLE 2308.8.2.1(1)—FLOOR JOIST SPANS FOR COMMON LUMBER SPECIES(Residential sleeping areas, live load = 30 psf, L/Δ = 360) |
| 575 | TABLE 2308.8.2.1(1)—FLOOR JOIST SPANS FOR COMMON LUMBER SPECIES(Residential sleeping areas, live load = 30 psf, L/Δ = 360)—continued |
| 576 | TABLE 2308.8.2.1(2)—FLOOR JOIST SPANS FOR COMMON LUMBER SPECIES(Residential living areas, live load = 40 psf, L/Δ = 360) |
| 577 | TABLE 2308.8.2.1(2)—FLOOR JOIST SPANS FOR COMMON LUMBER SPECIES(Residential living areas, live load = 40 psf, L/Δ = 360)—continued |
| 578 | FIGURE 2308.8.4.1(1)—OPENINGS IN FLOOR AND ROOF DIAPHRAGMS FIGURE 2308.8.4.1(2)—OPENING LIMITATIONS FOR FLOOR AND ROOF DIAPHRAGMS |
| 579 | FIGURE 2308.8.4.2—PORTIONS OF FLOOR LEVEL OFFSET VERTICALLY TABLE 2308.9.1—SIZE, HEIGHT AND SPACING OF WOOD STUDSc |
| 580 | TABLE 2308.9.1—SIZE, HEIGHT AND SPACING OF WOOD STUDSc—continued |
| 581 | FIGURE 2308.9.5.1(1)—SINGLE-MEMBER HEADER IN EXTERIOR BEARING WALL FIGURE 2308.9.5.1(2)—ALTERNATIVE SINGLE-MEMBER HEADER WITHOUT CRIPPLE |
| 582 | TABLE 2308.9.9—MINIMUM THICKNESS OF WALL SHEATHING FIGURE 2308.10.1—BASIC COMPONENTS OF THE LATERAL BRACING SYSTEM |
| 583 | TABLE 2308.10.1—WALL BRACING REQUIREMENTSa |
| 584 | TABLE 2308.10.3(1)—BRACING METHODS |
| 585 | TABLE 2308.10.3(1)—BRACING METHODS—continued TABLE 2308.10.3(2)—EXPOSED PLYWOOD PANEL SIDING TABLE 2308.10.3(3)—WOOD STRUCTURAL PANEL WALL SHEATHINGb(Not exposed to the weather, strength axis parallel or perpendicular to studs except as indicated) TABLE 2308.10.3(4)—ALLOWABLE SPANS FOR PARTICLEBOARD WALL SHEATHING(Not exposed to the weather, long dimension of the panel parallel or perpendicular to studs) TABLE 2308.10.3(5)—HARDBOARD SIDING |
| 586 | TABLE 2308.10.3(5)—HARDBOARD SIDING—continued |
| 587 | FIGURE 2308.10.5.1—ALTERNATE BRACED WALL PANEL (ABW) |
| 588 | FIGURE 2308.10.5.2—PORTAL FRAME WITH HOLD-DOWNS (PFH) |
| 589 | FIGURE 2308.10.7.2(1)—BRACED WALL LINE TOP PLATE CONNECTION FIGURE 2308.10.7.2(2)—BRACED WALL PANEL TOP PLATE CONNECTIONFor SI: |
| 590 | FIGURE 2308.10.8.2(1)—ROOF IN SDC D OR E NOT SUPPORTED ON ALL EDGES FIGURE 2308.10.8.2(2)—ROOF EXTENSION IN SDC D OR E BEYOND BRACED WALL LINE |
| 591 | FIGURE 2308.10.8.3—STEPPED FOOTING CONNECTION DETAILS |
| 592 | TABLE 2308.11.1(1)—CEILING JOIST SPANS FOR COMMON LUMBER SPECIES(Uninhabitable attics without storage, live load = 10 psf, L/Δ = 240) |
| 593 | TABLE 2308.11.1(1)—CEILING JOIST SPANS FOR COMMON LUMBER SPECIES(Uninhabitable attics without storage, live load = 10 psf, L/Δ = 240)—continued |
| 594 | TABLE 2308.11.1(1)—CEILING JOIST SPANS FOR COMMON LUMBER SPECIES(Uninhabitable attics without storage, live load = 10 psf, L/Δ = 240)—continued TABLE 2308.11.1(2)—CEILING JOIST SPANS FOR COMMON LUMBER SPECIES(Uninhabitable attics with limited storage, live load = 20 psf, L/Δ = 240) |
| 595 | TABLE 2308.11.1(2)—CEILING JOIST SPANS FOR COMMON LUMBER SPECIES(Uninhabitable attics with limited storage, live load = 20 psf, L/Δ = 240)—continued |
| 596 | TABLE 2308.11.1(2)—CEILING JOIST SPANS FOR COMMON LUMBER SPECIES(Uninhabitable attics with limited storage, live load = 20 psf, L/Δ = 240)—continued TABLE 2308.11.2(1)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load = 20 psf, ceiling not attached to rafters, L/Δ = 180) |
| 597 | TABLE 2308.11.2(1)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load = 20 psf, ceiling not attached to rafters, L/Δ = 180)—continued |
| 598 | TABLE 2308.11.2(1)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load = 20 psf, ceiling not attached to rafters, L/Δ = 180)—continued |
| 599 | TABLE 2308.11.2(1)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load = 20 psf, ceiling not attached to rafters, L/Δ = 180)—continued TABLE 2308.11.2(2)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load = 20 psf, ceiling attached to rafters, L/Δ = 240) |
| 600 | TABLE 2308.11.2(2)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load = 20 psf, ceiling attached to rafters, L/Δ = 240)—continued |
| 601 | TABLE 2308.11.2(2)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load = 20 psf, ceiling attached to rafters, L/Δ = 240)—continued |
| 602 | TABLE 2308.11.2(3)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd)= 30 psf, ceiling not attached to rafters, L/Δ = 180) |
| 603 | TABLE 2308.11.2(3)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd)= 30 psf, ceiling not attached to rafters, L/Δ = 180)—continued |
| 604 | TABLE 2308.11.2(3)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd)= 30 psf, ceiling not attached to rafters, L/Δ = 180)—continued TABLE 2308.11.2(4)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd) = 50 psf, ceiling not attached to rafters, L/Δ = 180) |
| 605 | TABLE 2308.11.2(4)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd) = 50 psf, ceiling not attached to rafters, L/Δ = 180)—continued |
| 606 | TABLE 2308.11.2(4)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd) = 50 psf, ceiling not attached to rafters, L/Δ = 180)—continued |
| 607 | TABLE 2308.11.2(5)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd) = 30 psf, ceiling attached to rafters, L/Δ = 240) |
| 608 | TABLE 2308.11.2(5)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd) = 30 psf, ceiling attached to rafters, L/Δ = 240) |
| 609 | TABLE 2308.11.2(5)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd) = 30 psf, ceiling attached to rafters, L/Δ = 240) TABLE 2308.11.2(6)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd) = 50 psf, ceiling attached to rafters, L/Δ = 240) |
| 610 | TABLE 2308.11.2(6)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd) = 50 psf, ceiling attached to rafters, L/Δ = 240)—continued |
| 611 | TABLE 2308.11.2(6)—RAFTER SPANS FOR COMMON LUMBER SPECIES(Allowable stress design ground snow load, pg(asd) = 50 psf, ceiling attached to rafters, L/Δ = 240)—continued |
| 612 | TABLE 2308.11.2(7)—RAFTER SPAN ADJUSTMENT FACTOR TABLE 2308.11.3.1—RAFTER TIE CONNECTIONSi |
| 613 | TABLE 2308.11.3.1—RAFTER TIE CONNECTIONSi—continued TABLE 2308.11.3.1(1)—HEEL JOINT CONNECTION ADJUSTMENT FACTORS |
| 614 | TABLE 2308.11.4—REQUIRED RATING OF APPROVED UPLIFT CONNECTORS (pounds)a, b, c, e, f, g, h, d |
| 615 | TABLE 2308.11.11—ALLOWABLE SPANS FOR 2-INCH TONGUE-AND-GROOVE DECKING |
| 616 | TABLE 2308.11.11—ALLOWABLE SPANS FOR 2-INCH TONGUE-AND-GROOVE DECKING—continued SECTION 2309—WOOD FRAME CONSTRUCTION MANUAL |
| 617 | CHAPTER 24: GLASS AND GLAZING SECTION 2401—GENERAL SECTION 2402—GLAZING REPLACEMENT SECTION 2403—GENERAL REQUIREMENTS FOR GLASS SECTION 2404—WIND, SNOW, SEISMIC AND DEAD LOADS ON GLASS EQUATION 24-1 |
| 618 | EQUATION 24-2 EQUATION 24-3 EQUATION 24-4 EQUATION 24-5 EQUATION 24-6 EQUATION 24-7 EQUATION 24-8 EQUATION 24–9 |
| 619 | EQUATION 24-10 EQUATION 24-11 EQUATION 24-12 SECTION 2405—SLOPED GLAZING AND SKYLIGHTS |
| 620 | EQUATION 24-13 EQUATION 24-14 EQUATION 24-15 |
| 621 | SECTION 2406—SAFETY GLAZING TABLE 2406.2(1)—MINIMUM CATEGORY CLASSIFICATION OF GLAZING USING CPSC 16 CFR PART 1201 TABLE 2406.2(2)—MINIMUM CATEGORY CLASSIFICATION OF GLAZING USING ANSI Z97.1 |
| 623 | SECTION 2407—GLASS IN HANDRAILS AND GUARDS SECTION 2408—GLAZING IN ATHLETIC FACILITIES SECTION 2409—GLASS IN WALKWAYS, ELEVATOR HOISTWAYS AND ELEVATOR CARS |
| 625 | CHAPTER 25: GYPSUM PANEL PRODUCTS AND PLASTER SECTION 2501—GENERAL SECTION 2502—PERFORMANCE SECTION 2503—INSPECTION SECTION 2504—VERTICAL AND HORIZONTAL ASSEMBLIES SECTION 2505—SHEAR WALL CONSTRUCTION SECTION 2506—GYPSUM PANEL PRODUCT MATERIALS |
| 626 | TABLE 2506.2—GYPSUM PANEL PRODUCTS MATERIALS AND ACCESSORIES SECTION 2507—LATHING AND PLASTERING TABLE 2507.2—LATH, PLASTERING MATERIALS AND ACCESSORIES |
| 627 | TABLE 2507.2—LATH, PLASTERING MATERIALS AND ACCESSORIES—continued SECTION 2508—GYPSUM CONSTRUCTION TABLE 2508.1—INSTALLATION OF GYPSUM CONSTRUCTION |
| 628 | TABLE 2508.6—SHEAR CAPACITY FOR HORIZONTAL WOOD-FRAME GYPSUM PANEL PRODUCT DIAPHRAGM CEILING ASSEMBLIES SECTION 2509—SHOWERS AND WATER CLOSETS TABLE 2509.2—BACKERBOARD MATERIALS SECTION 2510—LATHING AND FURRING FOR CEMENT PLASTER (STUCCO) |
| 629 | SECTION 2511—INTERIOR PLASTER TABLE 2511.1.1—INSTALLATION OF PLASTER CONSTRUCTION |
| 630 | SECTION 2512—EXTERIOR PLASTER TABLE 2512.6—CEMENT PLASTERS |
| 631 | SECTION 2513—EXPOSED AGGREGATE PLASTER SECTION 2514—REINFORCED GYPSUM CONCRETE |
| 632 | CHAPTER 26: PLASTIC SECTION 2601—GENERAL SECTION 2602—FINISH AND TRIM SECTION 2603—FOAM PLASTIC INSULATION TABLE 2603.1.2—MATERIAL STANDARDS FOR FOAM PLASTIC INSULATING SHEATHING |
| 636 | FIGURE 2603.8—TERMITE INFESTATION PROBABILITY MAP SECTION 2604—INTERIOR FINISH AND TRIM |
| 637 | SECTION 2605—PLASTIC VENEER SECTION 2606—LIGHT-TRANSMITTING PLASTICS |
| 638 | SECTION 2607—LIGHT-TRANSMITTING PLASTIC WALL PANELS TABLE 2607.4—AREA LIMITATION AND SEPARATION REQUIREMENTS FOR LIGHT-TRANSMITTING PLASTIC WALL PANELSa |
| 639 | SECTION 2608—LIGHT-TRANSMITTING PLASTIC GLAZING SECTION 2609—LIGHT-TRANSMITTING PLASTIC ROOF PANELS |
| 640 | TABLE 2609.4—AREA LIMITATIONS FOR LIGHT-TRANSMITTING PLASTIC ROOF PANELS SECTION 2610—LIGHT-TRANSMITTING PLASTIC SKYLIGHT GLAZING SECTION 2611—LIGHT-TRANSMITTING PLASTIC INTERIOR SIGNS |
| 641 | SECTION 2612—PLASTIC COMPOSITE DECKING SECTION 2613—FIBER-REINFORCED POLYMER |
| 642 | SECTION 2614—REFLECTIVE PLASTIC CORE INSULATION |
| 643 | CHAPTER 27: ELECTRICAL SECTION 2701—GENERAL SECTION 2702—EMERGENCY AND STANDBY POWER SYSTEMS |
| 645 | SECTION 2703—LIGHTNING PROTECTION SYSTEMS |
| 646 | CHAPTER 28: MECHANICAL SYSTEMS SECTION 2801—GENERAL |
| 647 | CHAPTER 29: PLUMBING SYSTEMS SECTION 2901—GENERAL SECTION 2902—MINIMUM PLUMBING FACILITIES |
| 648 | TABLE 2902.1 [P] TABLE 2902.1—MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa(See Sections 2902.1.1 and 2902.2) |
| 649 | TABLE 2902.1 [P] TABLE 2902.1—MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa(See Sections 2902.1.1 and 2902.2)—continued |
| 650 | TABLE 2902.1 [P] TABLE 2902.1—MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa(See Sections 2902.1.1 and 2902.2)—continued |
| 651 | TABLE 2902.1 [P] TABLE 2902.1—MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa(See Sections 2902.1.1 and 2902.2)—continued |
| 653 | [P] SECTION 2903—INSTALLATION OF FIXTURES |
| 655 | CHAPTER 30: ELEVATORS AND CONVEYING SYSTEMS SECTION 3001—GENERAL TABLE 3001.3—ELEVATORS AND CONVEYING SYSTEMS AND COMPONENTS SECTION 3002—HOISTWAY ENCLOSURES |
| 656 | SECTION 3003—EMERGENCY OPERATIONS SECTION 3004—CONVEYING SYSTEMS |
| 657 | SECTION 3005—MACHINE ROOMS |
| 658 | SECTION 3006—ELEVATOR LOBBIES AND HOISTWAY OPENING PROTECTION |
| 659 | SECTION 3007—FIRE SERVICE ACCESS ELEVATOR |
| 660 | FIGURE 3007.6.5—FIRE SERVICE ACCESS ELEVATOR SYMBOL SECTION 3008—OCCUPANT EVACUATION ELEVATORS |
| 662 | SECTION 3009—PRIVATE RESIDENCE ELEVATORS |
| 663 | CHAPTER 31: SPECIAL CONSTRUCTION SECTION 3101—GENERAL SECTION 3102—MEMBRANE STRUCTURES |
| 664 | SECTION 3103—TEMPORARY STRUCTURES |
| 665 | TABLE 3103.6.1.1—REDUCTION FACTORS FOR GROUND SNOW LOADS FOR PUBLIC-OCCUPANCY TEMPORARY STRUCTURES |
| 666 | TABLE 3103.6.1.2—REDUCTION FACTORS FOR WIND LOADS FOR PUBLIC-OCCUPANCY TEMPORARY STRUCTURES |
| 667 | SECTION 3104—PEDESTRIAN WALKWAYS AND TUNNELS |
| 668 | SECTION 3105—AWNINGS AND CANOPIES SECTION 3106—MARQUEES |
| 669 | SECTION 3107—SIGNS SECTION 3108—TELECOMMUNICATION AND BROADCAST TOWERS SECTION 3109—SWIMMING POOLS, SPAS AND HOT TUBS SECTION 3110—AUTOMATIC VEHICULAR GATES SECTION 3111—SOLAR ENERGY SYSTEMS |
| 670 | SECTION 3112—GREENHOUSES SECTION 3113—RELOCATABLE BUILDINGS |
| 671 | SECTION 3114—INTERMODAL SHIPPING CONTAINERS |
| 673 | TABLE 3114.8.5.3—ALLOWABLE SHEAR VALUES FOR PROFILEDSTEEL PANEL SIDE WALLS AND END WALLS FOR WIND OR SEISMIC LOADING FIGURE 3114.8.5.3(1)—BRACING UNIT DISTRIBUTION—MAXIMUM LINEAR LENGTH |
| 674 | FIGURE 3114.8.5.3(2)—BRACING UNIT DISTRIBUTION—MINIMUM LINEAR LENGTH FIGURE 3114.8.5.3(3)—BRACING UNIT DISTRIBUTION—BOUNDARY ELEMENTS FIGURE 3114.8.5.3(4)—BRACING UNIT DISTRIBUTION—PENETRATION LIMITATIONS |
| 675 | CHAPTER 32: ENCROACHMENTS INTO THE PUBLIC RIGHT-OF-WAY SECTION 3201—GENERAL SECTION 3202—ENCROACHMENTS |
| 676 | CHAPTER 33: SAFEGUARDS DURING CONSTRUCTION SECTION 3301—GENERAL SECTION 3302—OWNER’S RESPONSIBILITY FOR FIRE PROTECTION |
| 677 | SECTION 3303—DEMOLITION SECTION 3304—SITE WORK |
| 678 | SECTION 3305—SANITARY SECTION 3306—PROTECTION OF PEDESTRIANS TABLE 3306.1—PROTECTION OF PEDESTRIANS |
| 679 | SECTION 3307—PROTECTION OF ADJACENT PROPERTY SECTION 3308—TEMPORARY USE OF STREETS, ALLEYS AND PUBLIC PROPERTY |
| 680 | SECTION 3309—FIRE EXTINGUISHERS SECTION 3310—MEANS OF EGRESS SECTION 3311—STANDPIPES SECTION 3312—AUTOMATIC SPRINKLER SYSTEM SECTION 3313—WATER SUPPLY FOR FIRE PROTECTION |
| 681 | SECTION 3314—FIRE WATCH DURING CONSTRUCTION |
| 682 | CHAPTER 34: RESERVED |
| 683 | CHAPTER 35: REFERENCED STANDARDS AA AAMA ACI AISC |
| 684 | AISI ALI AMCA ANSI |
| 685 | APA |
| 686 | ASABE ASCE/SEI ASHRAE ASME |
| 687 | ASSP ASTM |
| 698 | AWC |
| 699 | AWCI AWPA AWS BHMA CEN CPA |
| 700 | CPSC CSA CSSB DASMA DHA DOC |
| 701 | DOL DOTn EN FEMA FM GA ICC |
| 702 | ISO |
| 703 | MHI NAAMM NCMA NFPA |
| 706 | PCI PTI RMI SBCA SDI SJI SPRI SRCC |
| 707 | TIA TMS TPI UL |
| 710 | ULC USC WCLIB WDMA WRI |
| 711 | APPENDIX A: EMPLOYEE QUALIFICATIONS SECTION A101—BUILDING OFFICIAL QUALIFICATIONS SECTION A102—REFERENCED STANDARDS TABLE A102.1—REFERENCED STANDARDS |
| 712 | APPENDIX B: BOARD OF APPEALS SECTION B101—GENERAL |
| 714 | APPENDIX C: GROUP U—AGRICULTURAL BUILDINGS SECTION C101—GENERAL SECTION C102—ALLOWABLE HEIGHT AND AREA TABLE C102.1—BASIC ALLOWABLE AREA FOR A GROUP U, ONE STORY IN HEIGHT AND MAXIMUM HEIGHT OF SUCH OCCUPANCY SECTION C103—MIXED OCCUPANCIES |
| 715 | SECTION C104—EXITS |
| 716 | APPENDIX D: FIRE DISTRICTS SECTION D101—GENERAL SECTION D102—BUILDING RESTRICTIONS |
| 717 | SECTION D103—CHANGES TO BUILDINGS SECTION D104—BUILDINGS LOCATED PARTIALLY IN THE FIRE DISTRICT SECTION D105—EXCEPTIONS TO RESTRICTIONS IN FIRE DISTRICT |
| 718 | SECTION D106—REFERENCED STANDARDS TABLE D106.1—REFERENCED STANDARDS |
| 719 | [BE] APPENDIX E: SUPPLEMENTARY ACCESSIBILITY REQUIREMENTS SECTION E101—GENERAL SECTION E102—DEFINITIONS SECTION E103—ACCESSIBLE ROUTE SECTION E104—SPECIAL OCCUPANCIES TABLE E104.2.1—DWELLING OR SLEEPING UNITS WITH ACCESSIBLE COMMUNICATION FEATURES |
| 720 | TABLE E104.2.1—DWELLING OR SLEEPING UNITS WITH ACCESSIBLE COMMUNICATION FEATURES—continued SECTION E105—OTHER FEATURES AND FACILITIES SECTION E106—TELEPHONES |
| 721 | TABLE E106.2—WHEELCHAIR-ACCESSIBLE TELEPHONES SECTION E107—SIGNAGE |
| 722 | SECTION E108—BUS STOPS SECTION E109—TRANSPORTATION FACILITIES AND STATIONS |
| 723 | SECTION E110—AIRPORTS SECTION E111—REFERENCED STANDARDS TABLE E111.1—REFERENCED STANDARDS |
| 724 | APPENDIX F: RODENTPROOFING SECTION F101—GENERAL |
| 725 | APPENDIX G: FLOOD-RESISTANT CONSTRUCTION SECTION G101—ADMINISTRATION SECTION G102—DEFINITIONS |
| 726 | SECTION G103—APPLICABILITY SECTION G104—POWERS AND DUTIES |
| 727 | SECTION G105—PERMITS SECTION G106—VARIANCES |
| 728 | SECTION G107—SUBDIVISIONS |
| 729 | SECTION G108—SITE IMPROVEMENT SECTION G109—MANUFACTURED HOMES SECTION G110—RECREATIONAL VEHICLES SECTION G111—TANKS |
| 730 | SECTION G112—OTHER BUILDING WORK SECTION G113—TEMPORARY STRUCTURES AND TEMPORARY STORAGE SECTION G114—UTILITY AND MISCELLANEOUS GROUP U |
| 731 | SECTION G115—REFERENCED STANDARDS TABLE G115.1—REFERENCED STANDARDS |
| 732 | APPENDIX H: SIGNS SECTION H101—GENERAL SECTION H102—DEFINITIONS SECTION H103—LOCATION |
| 733 | SECTION H104—IDENTIFICATION SECTION H105—DESIGN AND CONSTRUCTION SECTION H106—ELECTRICAL SECTION H107—COMBUSTIBLE MATERIALS SECTION H108—ANIMATED DEVICES |
| 734 | SECTION H109—GROUND SIGNS SECTION H110—ROOF SIGNS SECTION H111—WALL SIGNS SECTION H112—PROJECTING SIGNS |
| 735 | SECTION H113—MARQUEE SIGNS SECTION H114—PORTABLE SIGNS SECTION H115—THICKNESS OF SIGNS TABLE H115.1(1)—SIZE, THICKNESS AND TYPE OF GLASS PANELS IN SIGNS TABLE H115.1(2)—THICKNESS OF PROJECTION SIGN |
| 736 | SECTION H116—REFERENCED STANDARDS TABLE H116.1—REFERENCED STANDARDS |
| 737 | APPENDIX I: PATIO COVERS SECTION I101—GENERAL SECTION I102—DEFINITION SECTION I103—EXTERIOR WALLS AND OPENINGS SECTION I104—HEIGHT SECTION I105—STRUCTURAL PROVISIONS |
| 738 | APPENDIX J: GRADING SECTION J101—GENERAL SECTION J102—DEFINITIONS SECTION J103—PERMITS REQUIRED |
| 739 | SECTION J104—PERMIT APPLICATION AND SUBMITTALS SECTION J105—INSPECTIONS SECTION J106—EXCAVATIONS SECTION J107—FILLS |
| 740 | FIGURE J107.3—BENCHING DETAILS SECTION J108—SETBACKS |
| 741 | FIGURE J108.1—DRAINAGE DIMENSIONS SECTION J109—DRAINAGE AND TERRACING |
| 742 | SECTION J110—EROSION CONTROL SECTION J111—REFERENCED STANDARDS TABLE J111.1—REFERENCED STANDARDS |
| 743 | APPENDIX K: ADMINISTRATIVE PROVISIONS SECTION K101—GENERAL SECTION K102—APPLICABILITY SECTION K103—PERMITS |
| 744 | SECTION K104—CONSTRUCTION DOCUMENTS SECTION K105—ALTERNATIVE ENGINEERED DESIGN SECTION K106—REQUIRED INSPECTIONS |
| 745 | SECTION K107—PREFABRICATED CONSTRUCTION SECTION K108—TESTING SECTION K109—RECONNECTION SECTION K110—CONDEMNING ELECTRICAL SYSTEMS SECTION K111—ELECTRICAL PROVISIONS |
| 747 | APPENDIX L: EARTHQUAKE RECORDING INSTRUMENTATION SECTION L101—GENERAL SECTION L102—REFERENCED STANDARDS TABLE L102.1—REFERENCED STANDARDS |
| 748 | APPENDIX M: TSUNAMI-GENERATED FLOOD HAZARDS SECTION M101—REFUGE STRUCTURES FOR VERTICAL EVACUATION FROM TSUNAMI-GENERATED FLOOD HAZARDS SECTION M102—REFERENCED STANDARDS TABLE M102.1—REFERENCED STANDARDS |
| 749 | APPENDIX N: REPLICABLE BUILDINGS SECTION N101—ADMINISTRATION SECTION N102—DEFINITIONS SECTION N103—REPLICABLE DESIGN REQUIREMENTS SECTION N104—REPLICABLE DESIGN SUBMITTAL REQUIREMENTS |
| 750 | SECTION N105—REVIEW AND APPROVAL OF REPLICABLE DESIGN SECTION N106—SITE-SPECIFIC APPLICATION OF APPROVED REPLICABLE DESIGN SECTION N107—SITE-SPECIFIC REVIEW AND APPROVAL OF REPLICABLE DESIGN |
| 752 | [A] APPENDIX O: PERFORMANCE-BASED APPLICATION [A] SECTION O101—GENERAL |
| 754 | APPENDIX P: SLEEPING LOFTS SECTION P101—GENERAL SECTION P102—DEFINITIONS SECTION P103—MEANS OF EGRESS |
| 755 | SECTION P104—GUARDS SECTION P105—SMOKE ALARMS SECTION P106—REFERENCED STANDARDS TABLE P106.1—REFERENCED STANDARDS |
| 756 | INDEX |
| 778 | ICC DIGITAL CODES PREMIUM |
| 779 | ICC EVALUATION SERVICE® |
| 780 | CHANGES TO THE CODE DEVELOPMENT PROCESS |
| 781 | ICC CONSULTING SERVICES |
Related products
-
ICC IRC 2021 1stptg
International Residential Code, 3rd Printing Published By Publication Date Number of Pages ICC 2021 776
-
ICC IMC 2021 1stptg
International Mechanical Code, 3rd Printing Published By Publication Date Number of Pages ICC 2021 185
-
ICC IWUIC 2024 1stptg
International Wildland-Urban Interface Code Published By Publication Date Number of Pages ICC 2024
-
ICC IBC 2021 1stptg
International Building Code, 2nd Printing Published By Publication Date Number of Pages ICC 2021 839
-
ICC IEBC 2024 1stptg
International Existing Building Code Published By Publication Date Number of Pages ICC 2024
-
ICC IBC 2021 1stptg
International Building Code, 2nd Printing Published By Publication Date Number of Pages ICC 2021 833
-
ICC IPSDC 2024 1stptg
International Private Sewage Disposal Code Published By Publication Date Number of Pages ICC 2024 85
-
ICC IMC 2021 1stptg
International Mechanical Code, 3rd Printing Published By Publication Date Number of Pages ICC 2021 187
-
ICC IBC Commentary Volume 2 2021 1stptg
International Building Code and Commentary, Volume 2 Published By Publication Date Number of Pages ICC…
-
ICC IRC 2024 1stptg
International Residential Code Published By Publication Date Number of Pages ICC 2024 1123
-
ICC IMC Commentary 2021 1stptg
International Mechanical Code and Commentary Published By Publication Date Number of Pages ICC 2021
-
ICC ISPSC 2024 1stptg
International Swimming Pool and Spa Code Published By Publication Date Number of Pages ICC 2024
-
ICC IPSDC 2021 1stptg
International Private Sewage Disposal Code, 2nd Printing Published By Publication Date Number of Pages ICC…
-
ICC IPC 2021 1stptg
International Plumbing Code, 3rd Printing Published By Publication Date Number of Pages ICC 2021
-
ICC IPMC 2024 1stptg
International Property Maintenance Code Published By Publication Date Number of Pages ICC 2024
-
ICC IZC 2021 1stptg
International Zoning Code Published By Publication Date Number of Pages ICC 2021 69
-
ICC IFC 2021 1stptg
International Fire Code, 2nd Printing Published By Publication Date Number of Pages ICC 2021
-
ICC IECC 2024 1stptg
International Energy Conservation Code Published By Publication Date Number of Pages ICC 2024 393
-
ICC IRC 2021 1stptg
International Residential Code, 3rd Printing Published By Publication Date Number of Pages ICC 2021 1109
-
ICC IECC 2021 1stptg
International Energy Conservation Code, 3rd Printing Published By Publication Date Number of Pages ICC 2021
-
ICC IFGC 2024 1stptg
International Fuel Gas Code Published By Publication Date Number of Pages ICC 2024 215
-
ICC IZC 2024 1stptg
International Zoning Code Published By Publication Date Number of Pages ICC 2024 61
-
ICC IEBC Commentary 2021 1stptg
International Existing Building Code and Commentary Published By Publication Date Number of Pages ICC 2021
-
ICC IPMC 2021 1stptg
International Property Maintenance Code, 2nd Printing Published By Publication Date Number of Pages ICC 2021
-
ICC IPC 2021 1stptg
International Plumbing Code, 3rd Printing Published By Publication Date Number of Pages ICC 2021 271
-
ICC IEBC 2021 1stptg
International Existing Building Code, 2nd Printing Published By Publication Date Number of Pages ICC 2021
-
ICC IPC Commentary 2021 1stptg
International Plumbing Code and Commentary Published By Publication Date Number of Pages ICC 2021 779
-
ICC IFC 2024 1stptg
International Fire Code Published By Publication Date Number of Pages ICC 2024 665
-
ICC IFC 2021 1stptg
International Fire Code, 2nd Printing Published By Publication Date Number of Pages ICC 2021 693
-
ICC ICCPC 2024 1stptg
ICC Performance Code for Buildings and Facilities Published By Publication Date Number of Pages ICC…
-
ICC IFC Commentary 2021 1stptg
International Fire Code and Commentary Published By Publication Date Number of Pages ICC 2021
-
ICC IEBC Essentials 2021 1stptg
Existing Building Code Essentials, 2021 Edition Published By Publication Date Number of Pages ICC 2021…
-
ICC IPC 2024 1stptg
International Plumbing Code Published By Publication Date Number of Pages ICC 2024 275
-
ICC IEBC 2021 1stptg
International Existing Building Code, 2nd Printing Published By Publication Date Number of Pages ICC 2021
-
ICC IECC Commentary 2021 1stptg
International Energy Conservation Code and Commentary Published By Publication Date Number of Pages ICC 2021
-
ICC ISPSC 2021 1stptg
International Swimming Pool and Spa Code, 3rd Printing Published By Publication Date Number of Pages…
-
ICC IECC 2021 1stptg
International Energy Conservation Code, 3rd Printing Published By Publication Date Number of Pages ICC 2021…
-
ICC IECC SignificantChanges 2021 1stptg
Significant Changes to the International Energy Conservation Code Published By Publication Date Number of Pages…
-
ICC IGCC 2024 1stptg
International Green Construction Code (IgCC) Powered by ASHRAE Standard 189.1-2023 Published By Publication Date Number…
-
ICC IMC 2024 1stptg
International Mechanical Code Published By Publication Date Number of Pages ICC 2024
