ICC IBC Commentary Volume 1 2021 1stptg
$100.21
International Building Code and Commentary, Volume 1
Published By | Publication Date | Number of Pages |
ICC | 2021 | 1223 |
A practical tool that helps you to master the code you deal with every day! This comprehensive publication provides a convenient reference for regulations in chapters 1 through 15 of the 2021 International Building Code® (IBC®). Presented in an easy-to-reference format the commentary includes the full text of the code, including tables and figures, followed by corresponding commentary at the end of each section in one document. Every chapter begins with “General Comments” and “Purpose” sections followed by code and commentary to subsequent sections, tables and figures. This in-depth publication focuses on providing the full meaning and implications of the 2021 IBC®. The commentaries are designed to suggest the most effective method of application, and the consequences of not adhering to the code. This is an excellent reference for code officials, engineers, architects, inspectors, plans examiners, contractors and anyone who needs a better understanding of the 2021 IBC®.
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | 2021 IBC® CODE AND COMMENTARY VOLUME 1 |
2 | 2021 IBC® CODE AND COMMENTARY VOLUME 1 TITLE PAGE |
3 | COPYRIGHT |
4 | PREFACE |
5 | S.I. CONVERSION CHART FOR ENGLISH UNITS |
6 | TABLE OF CONTENTS |
8 | CHAPTER 1: SCOPE AND ADMINISTRATION GENERAL COMMENTS |
9 | PURPOSE PART 1—SCOPE AND APPLICATION SECTION 101 SCOPE AND GENERAL REQUIREMENTS |
11 | SECTION 102 APPLICABILITY |
13 | PART 2—ADMINISTRATION AND ENFORCEMENT SECTION 103 CODE COMPLIANCE AGENCY SECTION 104 DUTIES AND POWERS OF BUILDING OFFICIAL |
18 | SECTION 105 PERMITS |
21 | SECTION 106 FLOOR AND ROOF DESIGN LOADS |
22 | SECTION 107 CONSTRUCTION DOCUMENTS |
26 | SECTION 108 TEMPORARY STRUCTURES AND USES |
27 | SECTION 109 FEES SECTION 110 INSPECTIONS |
30 | SECTION 111 CERTIFICATE OF OCCUPANCY |
31 | SECTION 112 SERVICE UTILITIES |
32 | SECTION 113 MEANS OF APPEALS SECTION 114 VIOLATIONS |
33 | SECTION 115 STOP WORK ORDER SECTION 116 UNSAFE STRUCTURES AND EQUIPMENT |
34 | BIBLIOGRAPHY |
36 | CHAPTER 2: DEFINITIONS GENERAL COMMENTS PURPOSE SECTION 201 GENERAL SECTION 202 DEFINITIONS |
39 | COMMENTARY FIGURE 202(1) AISLES AND AISLE ACCESSWAYS |
41 | COMMENTARY FIGURE 202(2) COVERED MALL BUILDING COMMENTARY FIGURE 202(3) EXAMPLE OF ANNULAR SPACE |
43 | COMMENTARY FIGURE 202(4) GROSS CROSS-SECTIONAL AREA FOR SINGLE-WYTHE WALL UNDER LOAD COMMENTARY FIGURE 202(5) BUILDING AREA—PROJECTED |
45 | COMMENTARY FIGURE 202(6) BALANCED DOOR |
47 | COMMENTARY FIGURE 202(7) STORY ABOVE GRADE AND BASEMENTS |
48 | COMMENTARY FIGURE 202(8) MASONRY CONSTRUCTION TERMS COMMENTARY FIGURE 202(9) GROUP R-2—BOARDING HOUSE (OCCUPANTS PRIMARILY NONTRANSIENT) |
64 | COMMENTARY FIGURE 202(10) SPECIFIED AND NOMINAL DIMENSIONS FOR NOMINAL 8 × 8 × 16 CONCRETE MASONRY UNITS |
65 | COMMENTARY FIGURE 202(11) GROUP R-2—DORMITORY (OCCUPANTS PRIMARILY NONTRANSIENT) |
66 | COMMENTARY FIGURE 202(12) EXAMPLE OF DRAFTSTOPPING COMMENTARY FIGURE 202(13) EXAMPLE OF DRAFTSTOPPING |
70 | COMMENTARY FIGURE 202(14) EXIT |
71 | COMMEMTARY FIGURE 202(15) EXIT ACCESS COMMENTARY FIGURE 202(16) EXIT DISCHARGE |
72 | COMMENTARY FIGURE 202(17) EXIT DISCHARGE, LEVEL OF |
76 | COMMENTARY FIGURE 202(18) EXAMPLE OF FIRE BARRIER |
78 | COMMENTARY FIGURE 202(19) EXAMPLES OF FIRE-RESISTANT JOINT SYSTEMS |
79 | COMMENTARY FIGURE 202(20) FIRE SEPARATION DISTANCE MEASURED TO AN INTERIOR LOT LINE COMMENTARY FIGURE 202(21) FIRE SEPARATION DISTANCE MEASURED TO THE CENTERLINE OF ADJOINING STREET |
80 | COMMENTARY FIGURE 202(22) FIRE SEPARATION DISTANCE MEASURED TO AN IMAGINARY LINE BETWEEN TWO BUILDINGS ON THE SAME LOT |
87 | COMMENTARY FIGURE 202(23) DETERMINATION OF GRADE PLANE ELEVATION WHERE GRADE SLOPES UNIFORMLY ALONG THE ENTIRE LENGTH OF THE EXTERIOR WALLS COMMENTARY FIGURE 202(24) DETERMINATION OF GRADE PLANE ELEVATIONS WHERE GRADE AND EXTERIOR WALLS ARE IRREGULAR |
88 | COMMENTARY FIGURE 202(25) DETERMINATION OF GRADE PLANE WHERE GRADE SLOPES AWAY FROM THE EXTERIOR WALL COMMENTARY FIGURE 202(26) DETERMINATION OF GRADE PLANE ELEVATION WHERE GRADE DOES NOT SLOPE UNIFORMLY ALONG THE LENGTH OF THE EXTERIOR WALLS |
92 | COMMENTARY FIGURE 202(27) BUILDING HEIGHT |
93 | COMMENTARY FIGURE 202(28) HIGH-RISE BUILDING |
94 | COMMENTARY FIGURE 202(29) EXAMPLES OF HORIZONTAL ASSEMBLIES COMMENTARY FIGURE 202(30) HORIZONTAL EXIT |
96 | COMMENTARY FIGURE 202(31) INDIVIDUAL TRUSS MEMBERS – CHORD AND WEB |
101 | COMMENTARY FIGURE 202(32) LOW-ENERGY POWER-OPERATED DOOR—DUAL ACTION, DOUBLE LEAF SWINGING TYPE COMMENTARY FIGURE 202(33) LOW-ENERGY POWER-OPERATE DOOR—SINGLE LEAF WITH REMOTE PLATE COMMENTARY FIGURE 202(34) EXAMPLES OF SINGLE MEMBRANE PENETRATION |
104 | COMMENTARY FIGURE 202(35) EXAMPLES OF SINGLE MEMBRANE PENETRATION |
118 | COMMENTARY FIGURE 202(36) RUNNING BOND MASONRY |
122 | COMMENTARY FIGURE 202(37) SMOKE BARRIER |
131 | COMMENTARY FIGURE 202(38) EXAMPLES OF THROUGH-PENETRATION FIRESTOP SYSTEMS |
132 | COMMENTARY FIGURE 202(39) EXAMPLE OF DOOR FRAME WITH TERMINATED STOP |
140 | BIBLIOGRAPHY |
144 | CHAPTER 3: OCCUPANCY CLASSIFICATION AND USE GENERAL COMMENTS PURPOSE |
145 | SECTION 301 SCOPE SECTION 302 OCCUPANCY CLASSIFICATION AND USE DESIGNATION |
146 | COMMENTARY FIGURE 302.1 GROUP CLASSIFICATION SECTION 303 ASSEMBLY GROUP A |
147 | COMMENTARY FIGURE 303.1.2(1) ACCESSORY ASSEMBLY USE LIMITED BY OCCUPANT LOAD |
148 | COMMENTARY FIGURE 303.1.2(2) ACCESSORY ASSEMBLY USE GREATER THAN 10% OF FLOOR AREA BUT LESS THAN 750 SQ. FT |
149 | COMMENTARY FIGURE 303.2(1) GROUP A-1 COMMENTARY FIGURE 303.2(2) GROUP A-1 |
150 | COMMENTARY FIGURE 303.3 GROUP A-2 |
152 | SECTION 304 BUSINESS GROUP B |
153 | SECTION 305 EDUCATIONAL GROUP E |
154 | SECTION 306 FACTORY GROUP F |
156 | SECTION 307 HIGH-HAZARD GROUP H |
159 | TABLE 307.1(1) MAXIMUM ALLOWABLE QUANTITY PER CONTROL AREA OF HAZARDOUS MATERIALS POSING A PHYSICAL HAZARD |
160 | TABLE 307.1(1)—continued MAXIMUM ALLOWABLE QUANTITY PER CONTROL AREA OF HAZARDOUS MATERIALS POSING A PHYSICAL HAZARDa, j, m, n, p |
161 | TABLE 307.1(2) [F] TABLE 307.1(2) MAXIMUM ALLOWABLE QUANTITY PER CONTROL AREA OF HAZARDOUS MATERIALS POSING A HEALTH HAZARD |
165 | SECTION 308 INSTITUTIONAL GROUP I |
166 | COMMENTARY FIGURE 308.1 OCCUPANCY CLASSIFICATION OF CARE FACILITIES |
169 | COMMENTARY FIGURE 308.3(1) GROUP I-2—HOSPITAL COMMENTARY FIGURE 308.3(2) GROUP I-2—NURSING HOME |
171 | COMMENTARY FIGURE 308.4 GROUP I-3—OCCUPANCY CONDITIONS |
172 | COMMENTARY FIGURE 308.4.1 CONDITION 1 COMMENTARY FIGURE 308.4.2 CONDITION 2 |
173 | COMMENTARY FIGURE 308.4.3 CONDITION 3 COMMENTARY FIGURE 308.4.4 CONDITION 4 |
174 | COMMENTARY FIGURE 308.4.5 CONDITION 5 |
175 | SECTION 309 MERCANTILE GROUP M |
176 | COMMENTARY FIGURE 309.1(1) GROUP M—DEPARTMENT STORE |
177 | COMMENTARY FIGURE 309.1(2) GROUP M—SELF-SERVICE GAS STATION (NO REPAIR IS DONE) SECTION 310 RESIDENTIAL GROUP R |
179 | COMMENTARY FIGURE 310.2 GROUP R-1—HOTEL (OCCUPANTS PRIMARILY TRANSIENT) |
180 | COMMENTARY FIGURE 310.3(1) GROUP R-2—APARTMENTS (OCCUPANTS PRIMARILY TRANSIENT) COMMENTARY FIGURE 310.3(2) GROUP R-2—DORMITORY (OCCUPANTS PRIMARILY NONTRANSIENT) |
182 | COMMENTARY FIGURE 310.4(1) GROUP R-3—MIXED-OCCUPANCY BUILDING COMMENTARY FIGURE 310.4(2) GROUP R-3—MIXED-OCCUPANCY BUILDING |
183 | SECTION 311 STORAGE GROUP S |
185 | COMMENTARY FIGURE 311.2 GROUP S-1—REPAIR GARAGES |
186 | COMMENTARY FIGURE 311.3 GROUP S-2—ENCLOSED PARKING GARAGE SECTION 312 UTILITY AND MISCELLANEOUS GROUP U |
187 | BIBLIOGRAPHY |
188 | CHAPTER 4: SPECIAL DETAILED REQUIREMENTS BASED ON OCCUPANCY AND USE GENERAL COMMENTS PURPOSE SECTION 401 SCOPE SECTION 402 COVERED MALL AND OPEN MALL BUILDINGS |
189 | COMMENTARY FIGURE 402.1 COVERED MALL BUILDING |
190 | COMMENTARY FIGURE 402.1.1 OPEN MALL PERIMETER LINE |
192 | COMMENTARY FIGURE 402.4 TENANT SPACE AND ANCHOR BUILDING SEPARATIONS |
194 | COMMENTARY FIGURE 402.4.3 MINIMUM WIDTH OF OPEN MALL |
197 | COMMENTARY FIGURE 402.6.4 STOREFRONT SIGNAGE WITH PLASTIC SIGNS |
199 | COMMENTARY FIGURE 402.8 MEANS OF EGRESS |
200 | COMMENTARY FIGURE 402.8.1.1 COVERED MALL MINIMUM WIDTH EQUATION 4-1 |
203 | SECTION 403 HIGH-RISE BUILDINGS |
204 | COMMENTARY FIGURE 403.1(1) HIGH-RISE BUILDINGS |
205 | COMMENTARY FIGURE 403.1(2) HIGH-RISE BUILDINGS—STACK EFFECT COMMENTARY FIGURE 403.1(3) HIGH-RISE BUILDINGS—EVACUATION TIMES |
208 | TABLE 403.2.3 MINIMUM BOND STRENGTH |
214 | COMMENTARY FIGURE 403.5.1 HIGH-RISE BUILDINGS: REMOTENESS OF INTERIOR EXIT STAIRWAY ENCLOSURES |
215 | COMMENTARY FIGURE 403.5.2 ADDITIONAL STAIRWAY, COMPLEX BUILDING |
217 | COMMENTARY FIGURE 403.6.1 HIGH-RISE BUILDINGS: FIRE SERVICE ACCESS ELEVATORS |
218 | SECTION 404 ATRIUMS |
220 | COMMENTARY FIGURE 404.6(1) ENCLOSURE OF ATRIUMS (EXCEPTION 1) |
221 | COMMENTARY FIGURE 404.6(2) ENCLOSURE OF ATRIUMS (EXCEPTION 3) |
222 | SECTION 405 UNDERGROUND BUILDINGS |
223 | COMMENTARY FIGURE 404.10 EXIT STAIRWAY IN ATRIUM COMMENTARY FIGURE 405.1 EXAMPLES OF UNDERGROUND BUILDINGS |
225 | COMMENTARY FIGURE 405.4 EXAMPLE OF COMPARTMENTATION, ELEVATOR PROTECTION AND EGRESS OF AN UNDERGROUND BUILDING |
226 | COMMENTARY FIGURE 405.4.1 EXAMPLE OF HORIZONTAL COMPARTMENTATION |
228 | SECTION 406 MOTOR-VEHICLE-RELATED OCCUPANCIES |
234 | COMMENTARY FIGURE 406.5.2 TWO-STORY OPEN PARKING GARAGE |
235 | TABLE 406.5.4 OPEN PARKING GARAGES AREA AND HEIGHT |
239 | SECTION 407 GROUP I-2 |
241 | COMMENTARY FIGURE 407.2.1 GROUP I-2: WAITING ROOMS AND SIMILAR AREAS COMMENTARY FIGURE 407.2.2 GROUP I-2: CARE PROVIDERS’ STATION |
242 | COMMENTARY FIGURE 407.2.5 NURSING HOME HOUSING UNIT |
243 | COMMENTARY FIGURE 407.2.6(1) NURSING HOME WITH OPEN-PLAN KITCHEN COMMENTARY FIGURE 407.2.6(2) NURSING HOME HOUSING UNIT FLOOR PLAN |
245 | COMMENTARY FIGURE 407.3 GROUP I-2: CORRIDOR WALLS |
248 | COMMENTARY FIGURE 407.4.4 GROUP I-2: EXAMPLE OF SUITE |
250 | COMMENTARY FIGURE 407.5 GROUP I-2: SMOKE BARRIER |
251 | COMMENTARY FIGURE 407.5.4(1) ACCEPTABLE EGRESS ARRANGEMENT |
252 | COMMENTARY FIGURE 407.5.4(2) UNACCEPTABLE EGRESS ARRANGEMENT |
254 | SECTION 408 GROUP I-3 |
255 | COMMENTARY FIGURE 408.1 GROUP I-3: OCCUPANCY CONDITIONS |
258 | COMMENTARY FIGURE 408.4.1 GROUP I-3: MANUAL RELEASE |
259 | COMMENTARY FIGURE 408.5.1(1) GROUP I-3: VERTICAL OPENINGS COMMENTARY FIGURE 408.5.1(2) GROUP I-3: VERTICAL OPENINGS |
261 | COMMENTARY FIGURE 408.6.1 GROUP I-3: SMOKE COMPARTMENTS COMMENTARY FIGURE 408.6.2 GROUP I-3: REFUGE |
263 | SECTION 409 MOTION PICTURE PROJECTION ROOMS |
265 | SECTION 410 STAGES, PLATFORMS AND TECHNICAL PRODUCTION AREAS |
270 | SECTION 411 SPECIAL AMUSEMENT AREAS |
272 | SECTION 412 AIRCRAFT-RELATED OCCUPANCIES |
273 | TABLE 412.2.1.1 HEIGHT LIMITATIONS FOR AIRPORT TRAFFIC CONTROL TOWERS |
277 | [F] TABLE 412.3.6 HANGAR FIRE SUPPRESSION REQUIREMENTS |
280 | TABLE 412.6 AIRCRAFT MANUFACTURING EXIT ACCESS TRAVEL DISTANCE |
281 | SECTION 413 COMBUSTIBLE STORAGE SECTION 414 HAZARDOUS MATERIALS |
283 | COMMENTARY FIGURE 414.2 CONTROL AREAS [F] TABLE 414.2.2 DESIGN AND NUMBER OF CONTROL AREAS |
284 | COMMENTARY FIGURE 414.2.2 CONTROL AREAS |
287 | [F] TABLE 414.2.5(1) MAXIMUM ALLOWABLE QUANTITY PER INDOOR AND OUTDOOR CONTROL AREA IN GROUP M AND S OCCUPANCIES OF NONFLAMMABLE SOLIDS AND NONFLAMMABLE AND NONCOMBUSTIBLE LIQUIDS |
288 | [F] TABLE 414.2.5(2) MAXIMUM ALLOWABLE QUANTITY OF FLAMMABLE AND COMBUSTIBLE LIQUIDS IN WHOLESALE AND RETAIL SALES OCCUPANCIES PER CONTROL AREA |
290 | [F] TABLE 414.5.1 EXPLOSION CONTROL REQUIREMENTS |
291 | SECTION 415 GROUPS H-1, H-2, H-3, H-4 AND H-5 |
294 | [F] TABLE 415.6.5 DETACHED BUILDING REQUIRED |
300 | [F] TABLE 415.11.1.1.1 QUANTITY LIMITS FOR HAZARDOUS MATERIALS IN A SINGLE FABRICATION AREA IN GROUP H- |
303 | COMMENTARY FIGURE 415.11.2 ALLOWABLE HPM CORRIDOR ARRANGEMENTS |
310 | COMMENTARY FIGURE 415.11.12.1 CROSS-SECTIONAL DIAMETERS OF VARIOUS-SHAPED DUCTS |
311 | SECTION 416 SPRAY APPLICATION OF FLAMMABLE FINISHES |
312 | SECTION 417 DRYING ROOMS |
313 | SECTION 418 ORGANIC COATINGS |
314 | SECTION 419 ARTIFICIAL DECORATIVE VEGETATION SECTION 420 GROUPS I-1, R-1, R-2, R-3 AND R-4 |
317 | SECTION 421 HYDROGEN FUEL GAS ROOMS |
319 | SECTION 422 AMBULATORY CARE FACILITIES |
320 | COMMENTARY FIGURE 422.2 EXAMPLE OF SEPARATION FOR AMBULATORY CARE FACILITY |
321 | COMMENTARY FIGURE 422.3(1) EXAMPLE OF SMOKE COMPARTMENTS WITH AMBULATORY CARE FACILITIES COMMENTARY FIGURE 422.3(2) EXAMPLE OF SMOKE COMPARTMENTS WITH AMBULATORY CARE FACILITIES |
323 | SECTION 423 STORM SHELTERS |
325 | COMMENTARY FIGURE 423.4 SHELTER DESIGN WIND SPEEDS FOR TORNADOES |
326 | SECTION 424 PLAY STRUCTURES |
327 | SECTION 425 HYPERBARIC FACILITIES SECTION [F] 426 COMBUSTIBLE DUSTS, GRAIN PROCESSING AND STORAGE |
329 | SECTION 427 MEDICAL GAS SYSTEMS |
330 | SECTION 428 HIGHER EDUCATION LABORATORIES |
331 | [F] TABLE 428.3 DESIGN AND NUMBER OF LABORATORY SUITES PER FLOOR |
332 | BIBLIOGRAPHY |
336 | CHAPTER 5: GENERAL BUILDING HEIGHTS AND AREAS GENERAL COMMENTS PURPOSE SECTION 501 GENERAL |
337 | SECTION 502 BUILDING ADDRESS SECTION 503 GENERAL BUILDING HEIGHT AND AREA LIMITATIONS |
339 | COMMENTARY FIGURE 503.1.2(1) BUILDINGS ON SAME LOT COMMENTARY FIGURE 503.1.2(2) TWO BUILDINGS ON SAME LOT CREATED BY FIRE WALL |
341 | SECTION 504 BUILDING HEIGHT AND NUMBER OF STORIES |
343 | TABLE 504.3 ALLOWABLE BUILDING HEIGHT IN FEET ABOVE GRADE PLANEa |
344 | SECTION 505 MEZZANINES AND EQUIPMENT PLATFORMS |
345 | TABLE 504.4 ALLOWABLE NUMBER OF STORIES ABOVE GRADE PLANE |
346 | TABLE 504.4—continued ALLOWABLE NUMBER OF STORIES ABOVE GRADE PLANEa, b |
349 | SECTION 506 BUILDING AREA |
350 | EQUATION 5-1 EQUATION 5-2 |
352 | TABLE 506.2 ALLOWABLE AREA FACTOR (At = NS, S1, S13R, S13D or SM, as applicable) IN SQUARE FEET |
353 | TABLE 506.2—continued ALLOWABLE AREA FACTOR (At = NS, S1, S13R, S13D or SM, as applicable) IN SQUARE FEETa, b |
354 | TABLE 506.2—continued ALLOWABLE AREA FACTOR (At = NS, S1, S13R, S13D or SM, as applicable) IN SQUARE FEETa, b EQUATION 5-3 |
356 | COMMENTARY FIGURE 506.3.1(1) FRONTAGE INCREASE—FIRE WALL |
357 | COMMENTARY FIGURE 506.3.1(2) ACCESS TO OPEN SPACE COMMENTARY FIGURE 506.3.1(3) ACCESS TO OPEN SPACE |
358 | COMMENTARY FIGURE 506.3.2 FRONTAGE INCREASE—THREE SIDES TABLE 506.3.3 FRONTAGE INCREASE FACTORa |
359 | TABLE 506.3.3.1 SECTION 507 BUILDINGSa SECTION 507 UNLIMITED AREA BUILDINGS |
360 | COMMENTARY FIGURE 507.2 REQUIRED OPEN SPACE FOR UNLIMITED AREA BUILDINGS |
361 | COMMENTARY FIGURE 507.2.1 REDUCED OPEN SPACE—BUILDING CORNERS |
364 | COMMENTARY FIGURE 507.8.1.1 USE GROUP H-2 NOT LOCATED AT THE PERIMETER OF AN UNLIMITED AREA BUILDING |
365 | COMMENTARY FIGURE 507.8.2(1) GROUP H-2 AT THE CORNER OF AN UNLIMITED AREA BUILDING |
366 | COMMENTARY FIGURE 507.8.2(2) GROUP H-2 AT THE CORNER OF AN UNLIMITED AREA BUILDING |
367 | SECTION 508 MIXED USE AND OCCUPANCY |
369 | COMMENTARY FIGURE 508.2.3(1) ACCESSORY USES LIMITED BY FLOOR AREA COMMENTARY FIGURE 508.2.3(2) ACCESSORY USES LIMITED BY TABULAR AREA |
371 | COMMENTARY FIGURE 508.3 NONSEPARATED USES |
374 | TABLE 508.4 REQUIRED SEPARATION OF OCCUPANCIES (HOURS) |
376 | COMMENTARY FIGURE 508.4.4.1(1) SEPARATED OCCUPANCIES—EXAMPLE 1 |
377 | COMMENTARY FIGURE 508.4.4.1(2) SEPARATED OCCUPANCIES—EXAMPLE 1: LOCATION ON STORIES |
378 | COMMENTARY FIGURE 508.4.4.1(3) SEPARATED OCCUPANCIES—EXAMPLE 2 |
379 | COMMENTARY FIGURE 508.4.4.1(4) SEPARATED OCCUPANCIES—EXAMPLE 3 |
382 | SECTION 509 INCIDENTAL USES |
383 | [F]TABLE 509.1 INCIDENTAL USES |
384 | SECTION 510 SPECIAL PROVISIONS |
385 | COMMENTARY FIGURE 510.2 HORIZONTAL BUILDING SEPARATION |
387 | COMMENTARY FIGURE 510.4 EXAMPLE R-1 OVER ENCLOSED PARKING |
388 | COMMENTARY FIGURE 510.5 EXAMPLE TYPE IIIA, GROUP R-2 HEIGHT INCREASE |
389 | COMMENTARY FIGURE 510.6 EXAMPLE TYPE IIA, GROUP R-2 HEIGHT INCREASE |
390 | COMMENTARY FIGURE 510.7 OPEN PARKING BELOW OTHER GROUPS |
392 | COMMENTARY FIGURE 510.8 EXAMPLE OF S-2 PARKING OVER GROUP B AND M OCCUPANCIES BIBLIOGRAPHY |
393 | COMMENTARY FIGURE 510.9 MULTIPLE SEPARATE BUILDINGS |
394 | CHAPTER 6: TYPES OF CONSTRUCTION GENERAL COMMENTS PURPOSE SECTION 601 GENERAL |
395 | TABLE 601 FIRE-RESISTANCE RATING REQUIREMENTS FOR BUILDING ELEMENTS (HOURS) |
396 | COMMENTARY FIGURE 601 PROTECTION OF ROOF CONSTRUCTION |
397 | SECTION 602 CONSTRUCTION CLASSIFICATION |
399 | COMMENTARY FIGURE 602.2 EXAMPLES OF TYPES I AND II CONSTRUCTION COMMENTARY FIGURE 602.3 EXAMPLE OF TYPE III CONSTRUCTION |
402 | EQUATION 6-1 |
403 | COMMENTARY FIGURE 602.4.2.2.2(1) EXAMPLE OF TYPE IV-B EXPOSED CEILING MASS TIMBER COMMENTARY FIGURE 602.4.2.2.2(2) EXAMPLE OF TYPE IV-B EXPOSED WALL MASS TIMBER |
404 | COMMENTARY FIGURE 602.4.2.2.3 EXAMPLE OF TYPE IV-B EXPOSED MIXED CEILING/WALL MASS TIMBER |
406 | COMMENTARY FIGURE 602.5 EXAMPLE OF TYPE V CONSTRUCTION |
407 | SECTION 603 COMBUSTIBLE MATERIAL IN TYPES I AND II CONSTRUCTION |
409 | BIBLIOGRAPHY |
410 | CHAPTER 7: FIRE AND SMOKE PROTECTION FEATURES GENERAL COMMENTS SECTION 701 GENERAL SECTION 702 MULTIPLE-USE FIRE ASSEMBLIES |
411 | SECTION 703 FIRE-RESISTANCE RATINGS AND FIRE TESTS COMMENTARY FIGURE 703.2.1 STANDARD TIME-TEMPERATURE CURVE |
417 | SECTION 704 FIRE-RESISTANCE RATING OF STRUCTURAL MEMBERS COMMENTARY FIGURE 704.2 COLUMN PROTECTION |
418 | COMMENTARY FIGURE 704.3 INDIVIDUAL FIRE PROTECTION METHOD |
419 | COMMENTARY FIGURE 704.4.2 MEMBRANE FIRE PROTECTION METHOD |
422 | SECTION 705 EXTERIOR WALLS TABLE 705.2 MINIMUM DISTANCE OF PROJECTION |
423 | COMMENTARY FIGURE 705.2 PROJECTIONS FROM EXTERIOR WALLS |
424 | COMMENTARY FIGURE 705.2.4 ORIEL WINDOW |
425 | COMMENTARY FIGURE 705.3 R-2 WITH S-2 PARKING GARAGE |
426 | COMMENTARY FIGURE 705.5(1) DETERMINING FIRE SEPARATION DISTANCE |
427 | COMMENTARY FIGURE 705.5(2) DETERMINING FIRE SEPARATION DISTANCE FOR MULTISTORY BUILDINGS TABLE 705.5 FIRE-RESISTANCE RATING REQUIREMENTS FOR EXTERIOR WALLS BASED ON FIRE SEPARATION DISTANCE |
428 | COMMENTARY FIGURE 705.6 TYPE IIB AND VB EXTERIOR FIRE-RESISTANCE-RATED WALL CONTINUITY AND STRUCTURAL STABILITY |
429 | EQUATION 7-1 |
430 | FIGURE 705.7 EQUIVALENT OPENING FACTOR COMMENTARY FIGURE 705.7, EXAMPLE 705.7 ELEVATION OF EXTERIOR WALL |
431 | TABLE 705.8 MAXIMUM AREA OF EXTERIOR WALL OPENINGS BASED ON FIRE SEPARATION DISTANCE AND DEGREE OF OPENING PROTECTION |
432 | COMMENTARY FIGURE 705.8.1(1) EXAMPLE OF BUILDING WITH FLOOR OFFSETS COMMENTARY FIGURE 705.8.1(2) EXAMPLE OF BUILDING WITH FLOOR OFFSETS |
433 | COMMENTARY FIGURE 705.8.1(3) EXAMPLES OF PERMITTED UNLIMITED OPENING AREA IN THE FIRST STORY EQUATION 7-2 |
434 | COMMENTARY FIGURE 705.8.5(1) EXTERIOR WALL VERTICAL FLAME BARRIER COMMENTARY FIGURE 705.8.5(2) EXTERIOR WALL HORIZONTAL FLAME BARRIER |
435 | COMMENTARY FIGURE 705.8.6 VERTICAL FIRE EXPOSURE OF ADJACENT BUILDING |
438 | COMMENTARY FIGURE 705.11.1(1) PARAPET WALL EXTENSION WITH SLOPING 100% ROOF AND NONSPRINKLERED BUILDING COMMENTARY FIGURE 705.11.1(2) PARAPET WALL EXTENSION WITH SLOPING ROOF SPRINKLERED BUILDING |
439 | SECTION 706 FIRE WALLS |
440 | COMMENTARY FIGURE 706.2(1) DETAILS OF MASONRY FIRE WALL FOR STABILITY |
441 | COMMENTARY FIGURE 706.2(2 )DETAILS OF GYPSUM BOARD AREA SEPARATION WALLS (FIREWALL) TABLE 706.4 FIRE WALL FIRE-RESISTANCE RATINGS |
442 | COMMENTARY FIGURE 706.4(1) RELATIONSHIP BETWEEN FUEL LOAD AND FIRE ENDURANCE COMMENTARY FIGURE 706.4(2) OCCUPANCIES—FUEL LOAD-FIRE SEVERITY |
444 | COMMENTARY FIGURE 706.5.1(1) EXAMPLE OF METHOD 1 |
445 | COMMENTARY FIGURE 706.5.1(2) EXAMPLE OF METHOD 2 |
446 | COMMENTARY FIGURE 706.5.1(3) EXAMPLE OF METHOD 2 |
447 | COMMENTARY FIGURE 706.6 GENERIC FIRE WALL EXAMPLE |
448 | COMMENTARY FIGURE 706.6.1(1) FIRE WALLS—STEPPED BUILDINGS |
449 | COMMENTARY FIGURE 706.6.1(2) FIRE WALLS—STEPPED BUILDINGS COMMENTARY FIGURE 706.6.1(3) FIRE WALLS—EXTENSION EXCEPTION |
450 | COMMENTARY FIGURE 706.6.2 FIRE WALL EXTENSION AT SLOPING ROOF > 2:12 |
451 | SECTION 707 FIRE BARRIERS |
452 | TABLE 707.3.10 FIRE-RESISTANCE-RATING REQUIREMENTS FOR FIRE BARRIERS, FIRE WALLS OR HORIZONTAL ASSEMBLIES BETWEEN FIRE AREAS |
453 | COMMENTARY FIGURE 707.5 CONTINUITY OF FIRE BARRIERS |
455 | SECTION 708 FIRE PARTITIONS |
457 | COMMENTARY FIGURE 708.4(1) CONTINUITY OF FIRE PARTITIONS COMMENTARY FIGURE 708.4(2)(A) FIRE PARTITION CONTINUITY |
458 | COMMENTARY FIGURE 708.4(2)(B) FIRE PARTITION CONTINUITY |
459 | COMMENTARY FIGURE 708.4(2)(C) FIRE PARTITION CONTINUITY |
460 | COMMENTARY FIGURE 708.4.2(1) DRAFTSTOPPING IN LINE WITH TENANT AND DWELLING UNIT SEPARATION WALL |
461 | COMMENTARY FIGURE 708.4.2(2) DRAFTSTOPPING AT TENANT AND DWELLING UNIT SEPARATION |
462 | SECTION 709 SMOKE BARRIERS |
464 | COMMENTARY FIGURE 709.5 ACCEPTABLE MEETING EDGES OF DOUBLE MEANS OF EGRESS DOORS SECTION 710 SMOKE PARTITIONS |
466 | SECTION 711 FLOOR AND ROOF ASSEMBLIES |
468 | COMMENTARY FIGURE 711.2.5 CEILING PANELS USED IN FIRE-RESISTANCE-RATED ASSEMBLIES |
469 | COMMENTARY FIGURE 711.2.6(1) UNUSABLE SPACE ABOVE A FIRE-RESISTANCE-RATED ASSEMBLY COMMENTARY FIGURE 711.2.6(2) UNUSABLE SPACE BELOW A FIRE-RESISTANCE-RATED ASSEMBLY |
470 | SECTION 712 VERTICAL OPENINGS |
471 | COMMENTARY FIGURE 712.1.3.1 SHAFT ENCLOSURE—DRAFT CURTAIN EXCEPTION COMMENTARY FIGURE 712.1.3.2 SHAFT ENCLOSURE—SHUTTERS EXCEPTION |
473 | COMMENTARY FIGURE 712.1.9 TWO-STORY SHAFT ENCLOSURE EXCEPTION |
474 | SECTION 713 SHAFT ENCLOSURES |
475 | COMMENTARY FIGURE 713.4 VERTICAL SHAFTS—FIRE-RESISTANCE RATING |
476 | COMMENTARY FIGURE 713.7 PROTECTED OPENING IN SHAFT ENCLOSURE |
477 | COMMENTARY FIGURE 713.11(1) VERTICAL SHAFTS—BOTTOM ENCLOSURES, METHOD 1 |
478 | COMMENTARY FIGURE 713.11(2) VERTICAL SHAFTS—BOTTOM ENCLOSURE ROOM, METHOD 2 COMMENTARY FIGURE 713.11(3) VERTICAL SHAFTS—BOTTOM ENCLOSURE ROOM, METHOD 2—EXCEPTION 1 |
479 | COMMENTARY FIGURE 713.11(4) VERTICAL SHAFTS—BOTTOM ENCLOSURE WITH SPRINKLERS, METHOD 2—EXCEPTION 1 COMMENTARY FIGURE 713.11(5) VERTICAL SHAFTS—BOTTOM ENCLOSURE, EXCEPTION 3 |
480 | COMMENTARY FIGURE 713.13.3 REFUSE CHUTE (FIRE BARRIER OPTION) |
481 | SECTION 714 PENETRATIONS |
483 | COMMENTARY FIGURE 714.4.1(1) VERTICAL SHAFTS—COMBUSTIBLE PENETRATIONS |
484 | COMMENTARY FIGURE 714.4.1(2) COMBUSTIBLE PIPE PENETRATION OF FIRE-RESISTANCE-RATED WALL COMMENTARY FIGURE 714.4.1(3) EXAMPLES OF ANNULAR SPACE PROTECTION |
487 | COMMENTARY FIGURE 714.4.2(1) OUTLET BOXES IN RATED ASSEMBLIES |
488 | COMMENTARY FIGURE 714.4.2(2) EXCEPTION TO ANNULAR SPACE PROTECTION |
489 | COMMENTARY FIGURE 714.5.1(1) NONCOMBUSTIBLE PENETRATION OF A HORIZONTAL ASSEMBLY |
490 | COMMENTARY FIGURE 714.5.1(2) EXAMPLES OF ANNULAR SPACE PROTECTION WITH SLEEVES |
492 | COMMENTARY FIGURE 714.5.1.2 EXAMPLE OF CABLING THROUGH-PENETRATION FIRESTOP SYSTEM |
493 | COMMENTARY FIGURE 714.5.2(1) PROTECTION OF PENETRATIONS THROUGH CEILING MEMBRANE OF A HORIZONTAL ASSEMBLY COMMENTARY FIGURE 714.5.2(2) NONCOMBUSTIBLE PIPE PENETRATIONS THROUGH CEILING MEMBRANE OF A HORIZONTAL ASSEMBLY |
494 | SECTION 715 JOINTS AND VOIDS |
495 | COMMENTARY FIGURE 714.6.1 NONCOMBUSTIBLE PIPE PENETRATIONS OF NONFIRE-RESISTANCE-RATED ASSEMBLIES |
496 | COMMENTARY FIGURE 715.1 EXAMPLES OF JOINT LOCATIONS |
499 | COMMENTARY FIGURE 715.4 EXTERIOR CURTAIN WALL/FLOOR INTERSECTION SECTION 716 OPENING PROTECTIVES |
500 | TABLE 716.1(1) MARKING FIRE-RATED GLAZING ASSEMBLIES |
501 | TABLE 716.1(2) OPENING FIRE PROTECTION ASSEMBLIES, RATINGS AND MARKINGS |
502 | TABLE 716.1(2)—continued OPENING FIRE PROTECTION ASSEMBLIES, RATINGS AND MARKINGS TABLE 716.1(3) FIRE WINDOW ASSEMBLY FIRE PROTECTION RATINGS |
503 | COMMENTARY FIGURE 716.1.2.2(1) FIRE-RATED GLAZING LOCATIONS [FOR USE WITH TABLE 716.1(1)] |
504 | COMMENTARY FIGURE 716.1.2.2(2) MARKINGS OF FIRE-RATED GLAZINGa |
513 | SECTION 717 DUCTS AND AIR TRANSFER OPENINGS |
514 | COMMENTARY FIGURE 717.1.1 HORIZONTAL DUCT BETWEEN TWO SHAFTS |
516 | TABLE 717.3.2.1 FIRE DAMPER RATING |
519 | COMMENTARY FIGURE 717.5 FIRE DAMPERS IN RATED WALL |
521 | COMMENTARY FIGURE 717.5.2(1) EXAMPLES OF WHERE FIRE DAMPERS ARE NOT REQUIRED |
522 | COMMENTARY FIGURE 717.5.2(2) EXAMPLES OF WHERE FLEXIBLE DUCTWORK IS ALLOWED |
523 | COMMENTARY FIGURE 717.5.3(1) FIRE DAMPERS—EXCEPTION 1 COMMENTARY FIGURE 717.5.3(2) FIRE DAMPERS—EXCEPTION 1.4 |
524 | COMMENTARY FIGURE 717.5.4(1) FIRE DAMPERS—EXCEPTION 1 |
525 | COMMENTARY FIGURE 717.5.4(2) FIRE DAMPERS—EXCEPTION 3 |
527 | COMMENTARY FIGURE 717.6.1(1) AIR DUCT PENETRATION OF A HORIZONTAL ASSEMBLY |
528 | COMMENTARY FIGURE 717.6.1(2) AIR DUCT PENETRATION OF A HORIZONTAL ASSEMBLY |
530 | COMMENTARY FIGURE 717.6.3(1) DUCT PENETRATIONS OF NONFIRE-RESISTANCE-RATED ASSEMBLIES SECTION 718 CONCEALED SPACES |
531 | COMMENTARY FIGURE 717.6.3(2) FIRE DAMPERS IN DUCTS PENETRATING NONFIRE-RESISTANCE-RATED ASSEMBLIES |
534 | COMMENTARY FIGURE 718.2.3(1) FIREBLOCKING—SOFFIT COMMENTARY FIGURE 718.2.3(2) FIREBLOCKING—DROP CEILING |
535 | COMMENTARY FIGURE 718.2.3(3) FIREBLOCKING—COVE CEILING COMMENTARY FIGURE 718.2.4 FIREBLOCKING—STAIRS |
536 | COMMENTARY FIGURE 718.2.7 FIREBLOCKING—CONCEALED FLOOR SPACES |
537 | COMMENTARY FIGURE 718.3 DRAFTSTOPPING—CONCEALED FLOOR SPACES, OTHER GROUPS |
538 | SECTION 719 FIRE-RESISTANCE REQUIREMENTS FOR PLASTER |
539 | SECTION 720 THERMAL- AND SOUND-INSULATING MATERIALS COMMENTARY FIGURE 720.2 CONCEALED INSULATION |
541 | SECTION 721 PRESCRIPTIVE FIRE RESISTANCE |
542 | TABLE 721.1(1) MINIMUM PROTECTION OF STRUCTURAL PARTS BASED ON TIME PERIODS FOR VARIOUS NONCOMBUSTIBLE INSULATING MATERIALSm |
543 | TABLE 721.1(1)—continued MINIMUM PROTECTION OF STRUCTURAL PARTS BASED ON TIME PERIODS FOR VARIOUS NONCOMBUSTIBLE INSULATING MATERIALSm |
544 | TABLE 721.1(1)—continued MINIMUM PROTECTION OF STRUCTURAL PARTS BASED ON TIME PERIODS FOR VARIOUS NONCOMBUSTIBLE INSULATING MATERIALSm |
545 | TABLE 721.1(1)—continued MINIMUM PROTECTION OF STRUCTURAL PARTS BASED ON TIME PERIODS FOR VARIOUS NONCOMBUSTIBLE INSULATING MATERIALSm TABLE 721.1(2) RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONS |
546 | TABLE 721.1(2)—continued RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONS a, o, p |
547 | TABLE 721.1(2)—continued RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONS a, o, p |
548 | TABLE 721.1(2)—continued RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONS a, o, p |
549 | TABLE 721.1(2)—continued RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONS a, o, p |
550 | TABLE 721.1(2)—continued RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONS a, o, p |
551 | TABLE 721.1(2)—continued RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONS a, o, p |
552 | TABLE 721.1(2)—continued RATED FIRE-RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONS a, o, p TABLE 721.1(3) MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS |
553 | TABLE 721.1(3) MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMS |
554 | TABLE 721.1(3)—continued MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMSa, q |
555 | TABLE 721.1(3)—continued MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMSa, q |
556 | TABLE 721.1(3)—continued MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMSa, q |
557 | TABLE 721.1(3)—continued MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMSa, q |
558 | TABLE 721.1(3)—continued MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMSa, q |
559 | TABLE 721.1(3)—continued MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMSa, q |
560 | TABLE 721.1(3)—continued MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMSa, q |
561 | TABLE 721.1(3)—continued MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMSa, q |
562 | TABLE 721.1(3)—continued MINIMUM PROTECTION FOR FLOOR AND ROOF SYSTEMSa, q COMMENTARY FIGURE 721.1(2)(a) CONCRETE WALL COMMENTARY FIGURE 721.1(2)(b) METAL STUD WALL WITH PLASTER |
563 | COMMENTARY FIGURE 721.1(3) WOOD FLOOR TRUSS COMMENTARY FIGURE 721.1.1(1) STEEL COLUMN ENCASED IN CONCRETE COMMENTARY FIGURE 721.1.1(2) REINFORCING STEEL IN CONCRETE COLUMNS, BEAMS, GIRDERS AND TRUSSES |
564 | SECTION 722 CALCULATED FIRE RESISTANCE |
565 | TABLE 722.2.1.1 MINIMUM EQUIVALENT THICKNESS OF CAST-IN-PLACE OR PRECAST CONCRETE WALLS, LOAD-BEARING OR NONLOAD-BEARING |
566 | EQUATION 7-3 EQUATION 7-4 TABLE 722.2.1.2(1) VALUES OF Rn0.59 FOR USE IN EQUATION 7-4 TABLE 722.2.1.2(2) FIRE-RESISTANCE RATINGS BASED ON R0.59 |
567 | FIGURE 722.2.1.2 FIRE-RESISTANCE RATINGS OF TWO-WYTHE CONCRETE WALLS |
568 | FIGURE 722.2.1.3.1 CERAMIC FIBER JOINT PROTECTION TABLE 722.2.1.4(1) MULTIPLYING FACTOR FOR FINISHES ON NONFIRE-EXPOSED SIDE OF WALL |
569 | TABLE 722.2.1.4(2) TIME ASSIGNED TO FINISH MATERIALS ON FIRE-EXPOSED SIDE OF WALL |
570 | TABLE 722.2.2.1 MINIMUM SLAB THICKNESS (inches) |
571 | FIGURE 722.2.2.1.2 DETERMINATION OF SLAB THICKNESS FOR SLOPING SOFFITS EQUATION 7-5 FIGURE 722.2.2.1.3 SLABS WITH RIBBED OR UNDULATING SOFFITS |
572 | FIGURE 722.2.2.2 FIRE-RESISTANCE RATINGS FOR TWO-COURSE CONCRETE FLOORS FIGURE 722.2.2.3(1) FIRE-RESISTANCE RATINGS FOR CONCRETE ROOF ASSEMBLIES |
573 | FIGURE 722.2.2.3(2) FIRE-RESISTANCE RATINGS FOR CONCRETE ROOF ASSEMBLIES |
574 | TABLE 722.2.3(1) COVER THICKNESS FOR REINFORCED CONCRETE FLOOR OR ROOF SLABS (inches) TABLE 722.2.3(2) COVER THICKNESS FOR PRESTRESSED CONCRETE FLOOR OR ROOF SLABS (inches) TABLE 722.2.3(3) MINIMUM COVER FOR MAIN REINFORCING BARS OF REINFORCED CONCRETE BEAMSc (APPLICABLE TO ALL TYPES OF STRUCTURAL CONCRETE) TABLE 722.2.3(4) MINIMUM COVER FOR PRESTRESSED CONCRETE BEAMS 8 INCHES OR GREATER IN WIDTHb |
575 | TABLE 722.2.3(5) MINIMUM COVER FOR PRESTRESSED CONCRETE BEAMS OF ALL WIDTHS TABLE 722.2.4 MINIMUM DIMENSION OF CONCRETE COLUMNS (inches) |
576 | EQUATION 7-6 |
577 | TABLE 722.3.2 MINIMUM EQUIVALENT THICKNESS (inches) OF BEARING OR NONBEARING CONCRETE MASONRY WALLS |
579 | EQUATION 7-7 TABLE 722.3.4 MINIMUM COVER OF LONGITUDINAL REINFORCEMENT IN FIRE-RESISTANCE-RATED REINFORCED CONCRETE MASONRY LINTELS (inches) TABLE 722.3.5 MINIMUM DIMENSION OF CONCRETE MASONRY COLUMNS (inches) EQUATION 7-8 TABLE 722.4.1(3) VALUES OF Rn0.59 TABLE 722.4.1(4) COEFFICIENTS FOR PLASTER, pl a |
580 | TABLE 722.4.1(5) REINFORCED MASONRY LINTELS TABLE 722.4.1(6) REINFORCED CLAY MASONRY COLUMNS TABLE 722.4.1(1) FIRE-RESISTANCE PERIODS OF CLAY MASONRY WALLS TABLE 722.4.1(2) FIRE-RESISTANCE RATINGS FOR BEARING STEEL FRAME BRICK VENEER WALLS OR PARTITIONS |
581 | EQUATION 7-9 EQUATION 7-10 |
582 | EQUATION 7-11 |
583 | FIGURE 722.5.1(1) DETERMINATION OF THE HEATED PERIMETER OF STRUCTURAL STEEL COLUMNS FIGURE 722.5.1(2) GYPSUM-PROTECTED STRUCTURAL STEEL COLUMNS WITH SHEET STEEL COLUMN COVERS |
584 | FIGURE 722.5.1(3) GYPSUM-PROTECTED STRUCTURAL STEEL COLUMNS WITH STEEL STUD/SCREW ATTACHMENT SYSTEM FIGURE 722.5.1(4) FIRE RESISTANCE OF STRUCTURAL STEEL COLUMNS PROTECTED WITH VARIOUS THICKNESSES OF TYPE X GYPSUM WALLBOARD FIGURE 722.5.1(5) WIDE FLANGE STRUCTURAL STEEL COLUMNS WITH SPRAYED FIRE-RESISTANT MATERIALS |
585 | FIGURE 722.5.1(6) CONCRETE PROTECTED STRUCTURAL STEEL COLUMNS FIGURE 722.5.1(7) CONCRETE OR CLAY MASONRY PROTECTED STRUCTURAL STEEL COLUMNS |
586 | TABLE 722.5.1(1) W/D RATIOS FOR STEEL COLUMNS TABLE 722.5.1(1)—continued W/D RATIOS FOR STEEL COLUMNS |
587 | TABLE 722.5.1(2) PROPERTIES OF CONCRETE TABLE 722.5.1(3) THERMAL CONDUCTIVITY OF CONCRETE OR CLAY MASONRY UNITS |
588 | TABLE 722.5.1(4) WEIGHT-TO-HEATED-PERIMETER RATIOS (W/D) FOR TYPICAL WIDE FLANGE BEAM AND GIRDER SHAPES TABLE 722.5.1(4)—continued WEIGHT-TO-HEATED-PERIMETER RATIOS (W/D) FOR TYPICAL WIDE FLANGE BEAM AND GIRDER SHAPES |
589 | TABLE 722.5.1(4)—continued WEIGHT-TO-HEATED-PERIMETER RATIOS (W/D) FOR TYPICAL WIDE FLANGE BEAM AND GIRDER SHAPES TABLE 722.5.1(4)—continued WEIGHT-TO-HEATED-PERIMETER RATIOS (W/D) FOR TYPICAL WIDE FLANGE BEAM AND GIRDER SHAPES |
590 | TABLE 722.5.1(5) FIRE RESISTANCE OF CONCRETE MASONRY PROTECTED STEEL COLUMNS TABLE 722.5.1(5)—continued FIRE RESISTANCE OF CONCRETE MASONRY PROTECTED STEEL COLUMNS |
591 | TABLE 722.5.1(5)—continued FIRE RESISTANCE OF CONCRETE MASONRY PROTECTED STEEL COLUMNS TABLE 722.5.1(5)—continued FIRE RESISTANCE OF CONCRETE MASONRY PROTECTED STEEL COLUMNS |
592 | TABLE 722.5.1(6) FIRE RESISTANCE OF CLAY MASONRY PROTECTED STEEL COLUMNS |
593 | TABLE 722.5.1(7) MINIMUM COVER (inch) FOR STEEL COLUMNS ENCASED IN NORMAL-WEIGHT CONCRETEa [FIGURE 722.5.1(6)(c)] TABLE 722.5.1(8) MINIMUM COVER (inch) FOR STEEL COLUMNS ENCASED IN STRUCTURAL LIGHTWEIGHT CONCRETEa [FIGURE722.5.1(6)(c)] |
594 | TABLE 722.5.1(9) MINIMUM COVER (inch) FOR STEEL COLUMNS IN NORMAL-WEIGHT PRECAST COVERSa [FIGURE 722.5.1 (6)(a)] TABLE 722.5.1(10) MINIMUM COVER (inch) FOR STEEL COLUMNS IN STRUCTURAL LIGHTWEIGHT PRECAST COVERSa [FIGURE 722.5.1 (6)(a)] |
595 | EQUATION 7-12 COMMENTARY FIGURE 722.5.1.2.1 EXAMPLE—STEEL COLUMN PROTECTED WITH WALLBOARD EQUATION 7-13 |
597 | COMMENTARY FIGURE 722.5.1.3 EXAMPLE—SPRAY-APPLIED MATERIALS, FIRE ENDURANCE TEST DATA EQUATION 7-14 |
598 | EQUATION 7-15 EQUATION 7-16 FIGURE 722.5.2 DETERMINATION OF THE HEATED PERIMETER OF STRUCTURAL STEEL BEAMS AND GIRDERS |
599 | EQUATION 7-17 |
600 | COMMENTARY FIGURE 722.6 EXAMPLE—WOOD STUD WALL WITH WALLBOARD |
601 | TABLE 722.6.2(1) TIME ASSIGNED TO WALLBOARD MEMBRANES TABLE 722.6.2(2) TIME ASSIGNED FOR CONTRIBUTION OF WOOD FRAME |
602 | TABLE 722.6.2(3) MEMBRANEa ON EXTERIOR FACE OF WOOD STUD WALLS TABLE 722.6.2(4) FLOORING OR ROOFING OVER WOOD FRAMINGa TABLE 722.6.2(5) TIME ASSIGNED FOR ADDITIONAL PROTECTION |
603 | TABLE 722.7.1(1) PROTECTION REQUIRED FROM NONCOMBUSTIBLE COVERING MATERIAL TABLE 722.7.1(2) PROTECTION PROVIDED BY NONCOMBUSTIBLE COVERING MATERIAL |
605 | BIBLIOGRAPHY |
606 | CHAPTER 8: INTERIOR FINISHES GENERAL COMMENTS PURPOSE SECTION 801 SCOPE SECTION 802 GENERAL |
607 | SECTION 803 WALL AND CEILING FINISHES |
608 | COMMENTARY FIGURE 803.1.1(1) ROOM CORNER TEST COMMENTARY FIGURE 803.1.1(2) FLAME IN ROOM CORNER TEST |
609 | COMMENTARY FIGURE 803.1.2(1) ASTM E84 TUNNEL TEST COMMENTARY FIGURE 803.1.2(2) FLAME IN TUNNEL TEST |
612 | TABLE 803.13 INTERIOR WALL AND CEILING FINISH REQUIREMENTS BY OCCUPANCYk |
614 | COMMENTARY FIGURE 803.15.2 SET-OUT CONSTRUCTION COMMENTARY FIGURE 803.15.4 THIN INTERIOR FINISH |
615 | SECTION 804 INTERIOR FLOOR FINISH COMMENTARY FIGURE 804.2 RADIANT FLOOR PANEL TEST (NFPA 253) |
616 | SECTION 805 COMBUSTIBLE MATERIALS IN TYPES I AND II CONSTRUCTION SECTION 806 DECORATIVE MATERIALS AND TRIM |
618 | COMMENTARY FIGURE 806.5 MAXIMUM DIMENSION—FOAM PLASTIC TRIM |
619 | COMMENTARY FIGURE 806.7 TRIM COVERAGE AREA SECTION 807 INSULATION SECTION 808 ACOUSTICAL CEILING SYSTEMS |
620 | BIBLIOGRAPHY |
622 | CHAPTER 9: FIRE PROTECTION AND LIFE SAFETY SYSTEMS GENERAL COMMENTS PURPOSE SECTION 901 GENERAL |
625 | SECTION 902 FIRE PUMP AND RISER ROOM SIZE |
626 | SECTION 903 AUTOMATIC SPRINKLER SYSTEMS |
628 | COMMENTARY FIGURE 903.2 SUMMARY OF OCCUPANCY-RELATED AUTOMATIC SPRINKLER THRESHOLDS |
633 | [F] TABLE 903.2.5.2 GROUP H-5 SPRINKLER DESIGN CRITERIA |
639 | COMMENTARY FIGURE 903.2.11.1 SPACING OF OPENINGS IN STORIES OR BASEMENTS |
640 | COMMENTARY FIGURE 903.2.11.1.2(1) OPENINGS IN STORIES OR BASEMENTS—LESS THAN 75 FEET FROM ANY POINT TO AN OPENING COMMENTARY FIGURE 903.2.11.1.2(2) OPENINGS IN STORIES OR BASEMENTS—GREATER THAN 75 FEET FROM ANY POINT TO AN OPENING |
641 | COMMENTARY FIGURE 903.2.11.1.2(3) OPENINGS IN STORIES OR BASEMENTS—LESS THAN 75 FEET FROM ANY POINT TO AN OPENING COMMENTARY FIGURE 903.2.11.1.2(4) OPENINGS IN STORIES OR BASEMENTS |
642 | COMMENTARY FIGURE 903.2.11.3 SPRINKLER REQUIREMENTS: OCCUPANTS 55 FEET OR GREATER FROM FIRE DEPARTMENT VEHICLE ACCESS |
643 | [F]TABLE 903.2.11.6 ADDITIONAL REQUIRED PROTECTION SYSTEMS |
644 | COMMENTARY FIGURE 903.3 SAMPLE SPRINKLER SYSTEM DRAWING AND DATA SUBMITTALS |
645 | COMMENTARY FIGURE 903.3.1 NFPA 13, NFPA 13R AND NFPA 13D SYSTEMS COMMENTARY FIGURE 903.3.1.1 TYPICAL WET-PIPE SYSTEM |
648 | COMMENTARY FIGURE 903.3.1.2.2 OPEN-ENDED CORRIDOR |
653 | SECTION 904 ALTERNATIVE AUTOMATIC FIRE-EXTINGUISHING SYSTEMS |
655 | COMMENTARY FIGURE 904.2.1 SELECTED EXAMPLES OF REQUIREMENTS MODIFIED THROUGH USE OF AUTOMATIC SPRINKLER SYSTEMS |
660 | COMMENTARY FIGURE 904.11 WATER MIST NOZZLE DISCHARGE |
663 | SECTION 905 STANDPIPE SYSTEMS |
665 | COMMENTARY FIGURE 905.3.1(1) HEIGHT THRESHOLD FOR STANDPIPES |
666 | COMMENTARY FIGURE 905.3.1(2) HEIGHT REQUIREMENTS FOR STANDPIPES WITH MULTIPLE LEVELS OF FIRE DEPARTMENT VEHICLE ACCESS |
671 | SECTION 906 PORTABLE FIRE EXTINGUISHERS |
673 | [F] TABLE 906.1 ADDITIONAL REQUIRED PORTABLE FIRE EXTINGUISHERS IN THE INTERNATIONAL FIRE CODE |
674 | [F] TABLE 906.3(1) FIRE EXTINGUISHERS FOR CLASS A FIRE HAZ [F] TABLE 906.3(2) FIRE EXTINGUISHERS FOR FLAMMABLE OR COMBUSTIBLE LIQUIDS WITH DEPTHS LESS THAN OR EQUAL TO 0.25 INCHa |
676 | SECTION 907 FIRE ALARM AND DETECTION SYSTEMS |
679 | COMMENTARY FIGURE 907.2 SUMMARY OF MANUAL FIRE ALARM AND AUTOMATIC SMOKE DETECTION SYSTEM THRESHOLDS |
690 | COMMENTARY FIGURE 907.2.11.2 LOCATION OF SMOKE ALARMS IN A DWELLING UNIT |
704 | [F] TABLE 907.5.2.3.2 VISIBLE ALARMS |
708 | SECTION 908 EMERGENCY ALARM SYSTEMS SECTION 909 SMOKE CONTROL SYSTEMS |
711 | COMMENTARY FIGURE 909.4.1 STACK EFFECT |
715 | EQUATION 9-1 |
717 | COMMENTARY FIGURE 909.8(1) SMOKE LAYER INTERFACE IN AN ATRIUM |
718 | COMMENTARY FIGURE 909.8(2) AXISYMMETRIC PLUME COMMENTARY FIGURE 909.8(3) BALCONY SPILL PLUME |
719 | COMMENTARY FIGURE 909.8(4) WINDOW PLUME COMMENTARY FIGURE 909.8(5) PLUGHOLING |
720 | COMMENTARY FIGURE 909.8.1(1) CRITICAL LEVEL OF SMOKE (EXAMPLE) |
721 | COMMENTARY FIGURE 909.8.1(2) SMOKE LAYER INTERFACE |
723 | EQUATION 9-2 |
732 | COMMENTARY FIGURE 909.20.1 DIMENSIONAL REQUIREMENTS FOR SMOKEPROOF ENCLOSURE VESTIBULE |
733 | COMMENTARY FIGURE 909.20.3.2 SMOKEPROOF ENCLOSURE WITH OPEN VESTIBULE ARRANGEMENT |
734 | COMMENTARY FIGURE 909.20.4.1 SMOKEPROOF ENCLOSURE WITH CORRIDOR ARRANGEMENT |
735 | COMMENTARY FIGURE 909.20.4.2 MECHANICALLY VENTILATED VESTIBULE |
740 | SECTION 910 SMOKE AND HEAT REMOVAL |
742 | EQUATION 9-3 EQUATION 9-4 COMMENTARY FIGURE 910.3.2 SMOKE AND HEAT VENT SPACING |
745 | SECTION 911 FIRE COMMAND CENTER |
748 | SECTION 912 FIRE DEPARTMENT CONNECTIONS |
749 | COMMENTARY FIGURE 912.4.1 LOCKING FDC CAPS |
750 | COMMENTARY FIGURE 912.5 FIRE DEPARTMENT CONNECTION WITH SIGN SECTION 913 FIRE PUMPS |
752 | SECTION 914 EMERGENCY RESPONDER SAFETY FEATURES COMMENTARY FIGURE 914.1.1 SHAFTWAY SIGNAGE |
753 | SECTION 915 CARBON MONOXIDE DETECTION |
755 | COMMENTARY FIGURE 915.2.1 CARBON MONOXIDE ALARM PLACEMENT VERSUS SMOKE DETECTION PLACEMENT |
756 | COMMENTARY FIGURE 915.4.4 COMBINATION CARBON MONOXIDE AND SMOKE ALARM SECTION 916 GAS DETECTION SYSTEMS |
758 | SECTION 917 MASS NOTIFICATION SYSTEMS SECTION 918 EMERGENCY RESPONDER COMMUNICATION COVERAGE BIBLIOGRAPHY |
760 | CHAPTER 10: MEANS OF EGRESS GENERAL COMMENTS PURPOSE |
761 | SECTION 1001 ADMINISTRATION [F] SECTION 1002 MAINTENANCE AND PLANS |
762 | SECTION 1003 GENERAL MEANS OF EGRESS |
763 | COMMENTARY FIGURE 1003.3.1(1) DOOR CLOSER HEADROOM PROTRUSIONS FOR CIRCULATION ROUTES |
764 | COMMENTARY FIGURE 1003.3.1(2) REDUCED VERTICAL CLEARANCE COMMENTARY FIGURE 1003.3.2(1) POST-MOUNTED OBJECTS |
765 | COMMENTARY FIGURE 1003.3.2(2) POST-MOUNTED PROTRUDING OBJECTS COMMENTARY FIGURE 1003.3.3 EXAMPLE OF HORIZONTAL PROJECTIONS |
767 | SECTION 1004 OCCUPANT LOAD |
768 | COMMENTARY FIGURE 1004.2 COMBINED OCCUPANT LOAD FOR EGRESS DESIGN |
770 | TABLE 1004.5 MAXIMUM FLOOR AREA ALLOWANCES PER OCCUPANT |
771 | COMMENTARY FIGURE 1004.5 TYPICAL NET FLOOR AREA OCCUPANT LOAD CALCULATION |
772 | COMMENTARY FIGURE 1004.6 TYPICAL FIXED SEATING |
773 | COMMENTARY FIGURE 1004.9 EXAMPLE OF OCCUPANT LOAD LIMIT SIGN SECTION 1005 MEANS OF EGRESS SIZING |
777 | COMMENTARY FIGURE 1005.6(1) EGRESS CONVERGENCE AT FIRST STORY COMMENTARY FIGURE 1005.6(2) EGRESS CONVERGENCE AT INTERMEDIATE LEVEL COMMENTARY FIGURE 1005.6(3) NO EGRESS CONVERGENCE |
778 | COMMENTARY FIGURE 1005.7.1 TYPICAL DOOR RESTRICTIONS INTO PASSAGEWAY, AISLE AND CORRIDOR WIDTH |
779 | SECTION 1006 NUMBER OF EXITS AND EXIT ACCESS DOORWAYS |
780 | COMMENTARY FIGURE 1006.2.1 COMMON PATH OF EGRESS TRAVEL |
781 | TABLE 1006.2.1 SPACES WITH ONE EXIT OR EXIT ACCESS DOORWAY |
784 | TABLE 1006.3.3 MINIMUM NUMBER OF EXITS OR ACCESS TO EXITS PER STORY COMMENTARY FIGURE 1006.3.3 NUMBER OF EXITS |
786 | TABLE 1006.3.4(1) STORIES WITH ONE EXIT OR ACCESS TO ONE EXIT FOR R-2 OCCUPANCIES TABLE 1006.3.4(2) STORIES WITH ONE EXIT OR ACCESS TO ONE EXIT FOR OTHER OCCUPANCIES |
787 | COMMENTARY FIGURE 1006.3.4(1) MULTISTORY DWELLING UNITS COMMENTARY FIGURE 1006.3.4(2) EXAMPLE OF SINGLE-EXIT APARTMENT BUILDING |
788 | COMMENTARY FIGURE 1006.3.4(3) EXAMPLE OF SINGLE-EXIT APARTMENT WITHIN A TWO-EXIT BUILDING |
789 | COMMENTARY FIGURE 1006.3.4.1 STORIES WITH ONE EXIT SECTION 1007 EXIT AND EXIT ACCESS DOORWAY CONFIGURATION |
790 | COMMENTARY FIGURE 1007.1.1(1) EXAMPLES OF REMOTENESS BETWEEN EXITS OR EXIT ACCESS DOORS FROM A ROOM OR STORY |
791 | COMMENTARY FIGURE 1007.1.1(2) REMOTENESS OF INTERCONNECTING BY A 1-HOUR FIRE-RESISTANCE-RATED CORRIDOR |
792 | COMMENTARY FIGURE 1007.1.1(3) REMOTENESS OF EXITS IN A BUILDING WITH AN AUTOMATIC SPRINKLER SYSTEM COMMENTARY FIGURE 1007.1.1(4) REMOTE LOCATION OF EXIT ACCESS DOORS (ADJOINING ROOMS) |
793 | COMMENTARY FIGURE 1007.1.3 REMOTENESS OF EXIT ACCESS STAIRWAYS OR RAMPS SECTION 1008 MEANS OF EGRESS ILLUMINATION |
796 | SECTION 1009 ACCESSIBLE MEANS OF EGRESS |
799 | COMMENTARY FIGURE 1009.2.1 ELEVATOR REQUIRED FOR ACCESSIBLE MEANS OF EGRESS |
802 | COMMENTARY FIGURE 1009.3.3(1) ACCESSIBLE MEANS OF EGRESS STAIRWAY WITH ENLARGED STORY-LEVEL LANDING |
803 | COMMENTARY FIGURE 1009.3.3(2) ACCESSIBLE MEANS OF EGRESS STAIRWAY ACCESSED FROM AN AREA OF REFUGE COMMENTARY FIGURE 1009.3.3(3) ACCESSIBLE MEANS OF EGRESS STAIRWAY ACCESSED FROM A HORIZONTAL EXIT |
805 | COMMENTARY FIGURE 1009.6 SEPARATE TRAVEL DISTANCES TO AN AREA OF REFUGE |
808 | COMMENTARY FIGURE 1009.7.1 EXTERIOR AREA OF RESCUE ASSISTANCE—PLAN VIEW |
809 | COMMENTARY FIGURE 1009.7.2 EXTERIOR AREA FOR RESCUE ASSISTANCE—ELEVATION |
812 | SECTION 1010 DOORS, GATES AND TURNSTILES |
813 | COMMENTARY FIGURE 1010.1.1(1) TYPICAL DOOR OPENING CLEARANCE COMMENTARY FIGURE 1010.1.1(2) TYPICAL DOOR OPENING CLEARANCE WITH PANIC HARDWARE |
816 | COMMENTARY FIGURE 1010.1.3(1) EXAMPLE OF PUSH FORCE |
817 | COMMENTARY FIGURE 1010.1.3(2) EXAMPLE OF ROTAIONAL FORCE |
818 | COMMENTARY FIGURE 1010.1.4(1) DOOR LANDINGS COMMENTARY FIGURE 1010.1.4(2) ELEVATION CHANGE |
820 | COMMENTARY FIGURE 1010.1.6(1) VERTICAL CHANGES IN LEVEL COMMENTARY FIGURE 1010.1.6(2) BEVELED CHANGES IN LEVEL COMMENTARY FIGURE 1010.1.6(3) BEVELED CHANGES IN LEVEL COMMENTARY FIGURE 1010.1.6(4) DOOR THRESHOLD HEIGHT LIMITATIONS COMMENTARY FIGURE 1010.1.6(5) EXAMPLE OF EXCEPTON 2 |
821 | COMMENTARY FIGURE 1010.1.7(1) SPACING OF DOORS IN A SERIES COMMENTARY FIGURE 1010.1.7(2) SPACING OF DOORS IN A SERIES |
822 | COMMENTARY FIGURE 1010.2.2 DOOR HARDWARE |
824 | COMMENTARY FIGURE 1010.2.4 SURFACE AND FLUSH BOLT LOCATIONS |
825 | COMMENTARY FIGURE 1010.2.5 TYPICAL MANUAL BOLT HARDWARE |
829 | COMMENTARY FIGURE 1010.2.9.3(1) EXAMPLES OF TYPICAL PANIC HARDWARE COMMENTARY FIGURE 1010.2.9.3(2) EXAMPLES OF TYPICAL PANIC HARDWARE |
837 | COMMENTARY FIGURE 1010.3.1(1) REVOLVING DOORS IN BREAKOUT POSITION COMMENTARY FIGURE 1010.3.1(2) TYPICAL REVOLVING DOOR/SIDE-HINGED SWINGING DOOR ARRANGEMENT |
838 | COMMENTARY FIGURE 1010.3.1(3) EXAMPLE OF MANUAL REVOLVING DOOR (7-FOOT DIAMETER) COMMENTARY FIGURE 1010.3.1(4) EXAMPLE OF AUTOMATIC REVOLVING DOOR (8-FOOT DIAMETER) TABLE 1010.3.1(1) MAXIMUM DOOR SPEED MANUAL REVOLVING DOORS COMMENTARY FIGURE 1010.3.1(5) EXAMPLE OF AUTOMATIC REVOLVING DOOR (20-FOOT DIAMETER) |
839 | TABLE 1010.3.1(2) MAXIMUM DOOR SPEED AUTOMATIC OR POWER-OPERATED REVOLVING DOORS |
842 | COMMENTARY FIGURE 1010.5.1 EXAMPLES OF THREE 3-ARM, ROTATING TURNSTILES AND ONE SIDE-SWINGING TURNSTILE |
843 | COMMENTARY FIGURE 1010.5.2 EXAMPLE OF SECURITY ACCESS TURNSTILES COMMENTARY FIGURE 1010.5.3(1) EXAMPLE OF HIGH TURNSTILE THAT OPERATES SIMILAR TO A REVOLVING DOOR COMMENTARY FIGURE 1010.5.3(2) EXAMPLE OF HIGH TURNSTILE THAT OPERATES AS A SECURITY ACCESS TURNSTILE |
844 | SECTION 1011 STAIRWAYS |
846 | COMMENTARY FIGURE 1011.3(1) STAIRWAY HEADROOM REQUIREMENTS COMMENTARY FIGURE 1011.3(2) EXAMPLE OF SECTION 1011.3, EXCEPTION 2 |
847 | COMMENTARY FIGURE 1011.5.1 TREAD DEPTH MEASUREMENT |
848 | COMMENTARY FIGURE 1011.5.2 TREAD/RISER DIMENSIONS |
849 | COMMENTARY FIGURE 1011.5.3 STAIR WINDERS WITHIN A DWELLING |
850 | COMMENTARY FIGURE 1011.5.4 CONSISTENTLY SHAPED WINDERS |
851 | COMMENTARY FIGURE 1011.5.4.1 SLOPED LANDING |
852 | COMMENTARY FIGURE 1011.5.5.1 TREAD/RISER PROFILE (SOLID RISER) COMMENTARY FIGURE 1011.5.5.3 TREAD/RISER PROFILE (OPEN RISER) |
853 | COMMENTARY FIGURE 1011.6(1) TYPICAL LANDING DIMENSIONS—STRAIGHT-RUN STAIRWAY COMMENTARY FIGURE 1011.6(2) TYPICAL LANDING DIMENSIONS—STRAIGHT-RUN STAIRWAY WIDER THAN 48 INCHES |
854 | COMMENTARY FIGURE 1011.6(3) DOOR CLEARANCE REQUIREMENTS IN STAIRWAYS COMMENTARY FIGURE 1011.6(4) MEASUREMENT OF CURVED OF LANDINGS |
855 | COMMENTARY FIGURE 1011.6(5) LANDING AT SWITCHBACK STAIRWAY COMMENTARY FIGURE 1011.6(6) LANDING AT 90 DEGREE TURN |
856 | COMMENTARY FIGURE 1011.7.1 OPEN TREAD IN ACCORDANCE WITH EXCEPTION 1 |
857 | COMMENTARY FIGURE 1011.8 STAIRWAY RISE LIMITATION COMMENTARY FIGURE 1011.9 CURVED STAIRWAYS—MINIMUM DIMENSIONAL REQUIREMENTS |
858 | COMMENTARY FIGURE 1011.10 SPIRAL STAIRWAYS |
859 | COMMENTARY FIGURE 1011.11(1) EXAMPLE OF SECTION 1011.11, EXCEPTION 2 COMMENTARY FIGURE 1011.11(2) EXAMPLE OF SECTION 1011.11, EXCEPTION 5 |
861 | COMMENTARY FIGURE 1011.14 TYPICAL ALTERNATING TREAD DEVICE |
862 | COMMENTARY FIGURE 1011.15 TYPICAL SHIP’S LADDER |
863 | SECTION 1012 RAMPS |
864 | COMMENTARY FIGURE 1012.2 TYPICAL MEANS OF EGRESS RAMP |
865 | COMMENTARY FIGURE 1012.5.3 DOORWAY OPENING ONTO LANDING COMMENTARY FIGURE 1012.6 RAMP LANDINGS |
867 | COMMENTARY FIGURE 1012.8(1) RAMP WITH HANDRAIL AT WALL COMMENTARY FIGURE 1012.8(2) RAMP WITH HANDRAIL AND BARRIER |
868 | COMMENTARY FIGURE 1012.8(3) RAMP WITH HANDRAIL AND CURB COMMENTARY FIGURE 1012.8(4) RAMP WITH HANDRAIL AND GUARD |
869 | COMMENTARY FIGURE 1012.10.1 EDGE PROTECTION SECTION 1013 EXIT SIGNS |
870 | COMMENTARY FIGURE 1013.1 EXIT SIGNS WITHIN AN EXIT ENCLOSURE |
871 | COMMENTARY 1013.4 EXAMPLE OF EXIT SIGNAGE WITH VISUAL AND RAISED CHARACTERS WITH BRAILLE |
872 | COMMENTARY FIGURE 1013.6.1 MINIMUM SIZES OF EXIT SIGNS |
873 | SECTION 1014 HANDRAILS |
874 | COMMENTARY FIGURE 1014.2 HANDRAIL REQUIREMENTS |
875 | COMMENTARY FIGURE 1014.3.1 EXAMPLE OF TYPE I ALTERNATIVE HANDRAIL CONFIGURATION |
876 | COMMENTARY FIGURE 1014.3.2 EXAMPLES OF TYPE II HANDRAIL CONFIGURATIONS |
877 | COMMENTARY FIGURE 1014.4(1) EXAMPLES OF PROHIBITED HANDRAIL DESIGNS COMMENTARY FIGURE 1014.4(2) REDUCED BRACKET EXTENSIONS EXAMPLE PER SECTION 1014.4, EXCEPTION 3 |
878 | COMMENTARY FIGURE 1014.8(1) TYPICAL HANDRAIL ARRANGEMENT |
879 | COMMENTARY FIGURE 1014.8(2) PROJECTION OF HANDRAIL SECTION 1015 GUARDS |
880 | COMMENTARY FIGURE 1014.9 HANDRAILS FOR MONUMENTAL STAIRS COMMENTARY FIGURE 1015.2 DROPOFF MEASUREMENTS AND GUARD HEIGHTS |
881 | COMMENTARY FIGURE 1015.2.1 GUARD SYSTEM WITH GLAZING |
882 | COMMENTARY FIGURE 1015.3 DROPOFF MEASUREMENTS AND GUARD HEIGHTS FOR TWO- AND THREE-STORY GROUPS R-2 AND R-3 |
883 | COMMENTARY FIGURE 1015.4(1) GUARD HEIGHT AND OPENING LIMITATIONS COMMENTARY FIGURE 1015.4(2) GUARD OPENING LIMITATIONS, SECTION 1015.4, EXCEPTIONS 3 AND 4 |
884 | COMMENTARY FIGURE 1015.4(3) EXAMPLE OF GUARD WITH HORIZONTAL MEMBERS |
885 | COMMENTARY FIGURE 1015.7 PROTECTION AT ROOF-HATCH OPENING |
886 | SECTION 1016 EXIT ACCESS |
887 | COMMENTARY FIGURE 1016.2(1) EGRESS PROHIBITED THROUGH GROUP H AREAS COMMENTARY FIGURE 1016.2(2) EGRESS THROUGH ADJOINING ROOMS AND SPACES |
888 | SECTION 1017 EXIT ACCESS TRAVEL DISTANCE |
889 | TABLE 1017.2 EXIT ACCESS TRAVEL DISTANCEa |
891 | COMMENTARY FIGURE 1017.3(1) LENGTH OF EXIT ACCESS TRAVEL COMMENTARY FIGURE 1017.3(2) MEASURING TRAVEL DISTANCE USING RECTILINEAR APPROACH |
892 | SECTION 1018 AISLES |
893 | COMMENTARY FIGURE 1018.4 AISLES AND AISLE ACCESSWAYS IN MERCANTILE |
894 | SECTION 1019 EXIT ACCESS STAIRWAYS AND RAMPS |
896 | COMMENTARY FIGURE 1019.3 DRAFT CURTAIN, ITEM 4 SECTION 1020 CORRIDORS |
898 | TABLE 1020.2 CORRIDOR FIRE-RESISTANCE RATING COMMENTARY FIGURE 1020.2 APPLICATION OF TABLE 1020.2 |
900 | TABLE 1020.3 MINIMUM CORRIDOR WIDTH |
901 | COMMENTARY FIGURE 1020.5(1) ALLOWABLE DEAD-END CONDITIONS |
902 | COMMENTARY FIGURE 1020.5(2) CORRIDOR LENGTH/WIDTH RATIO FOR DEAD-END CONSIDERATIONS |
904 | COMMENTARY FIGURE 1020.7(1) CORRIDOR CONTINUITY—EXAMPLE 1 |
905 | COMMENTARY FIGURE 1020.7(2) CORRIDOR CONTINUITY—EXAMPLE 2 COMMENTARY FIGURE 1020.7(3) CORRIDOR CONTINUITY—EXAMPLE 3 COMMENTARY FIGURE 1020.7(4) ELEVATOR LOBBY/CORRIDOR OPTION 1 |
906 | COMMENTARY FIGURE 1020.7(5) ELEVATOR LOBBY/CORRIDOR OPTION 2 COMMENTARY FIGURE 1020.7(6) ELEVATOR LOBBY/CORRIDOR OPTION 4 SECTION 1021 EGRESS BALCONIES |
907 | COMMENTARY FIGURE 1021.2 EGRESS BALCONIES SECTION 1022 EXITS |
908 | SECTION 1023 INTERIOR EXIT STAIRWAYS AND RAMPS |
914 | COMMENTARY FIGURE 1023.7 EXAMPLES OF EXTERIOR WALL PROTECTION AT INTERIOR EXIT STAIRWAYS |
915 | COMMENTARY FIGURE 1023.8 EXAMPLE OF A STAIRWAY BARRIER AT THE LEVEL OF EXIT DISCHARGE COMMENTARY FIGURE 1023.9.1 STAIRWAY IDENTIFICATION SIGN |
917 | SECTION 1024 EXIT PASSAGEWAYS |
918 | COMMENTARY FIGURE 1023.12.2(1) TYPICAL SMOKEPROOF ENCLOSURE ENTRY COMMENTARY FIGURE 1023.12.2(2) TYPICAL SMOKEPROOF ENCLOSURE WITH OPEN BALCONY ARRANGEMENT |
919 | COMMENTARY FIGURE 1024.1 ARRANGEMENT FOR LOBBY AND PASSAGEWAY |
922 | SECTION 1025 LUMINOUS EGRESS PATH MARKINGS |
923 | COMMENTARY FIGURE 1025.2.1 LEADING EDGE OF STEP AND LANDING COMMENTARY FIGURE 1025.2.3 HANDRAIL MARKINGS |
924 | COMMENTARY FIGURE 1025.2.4.1 PERIMETER DEMARCATION LINES—FLOOR-MOUNTED OPTION COMMENTARY FIGURE 1025.2.4.2 PERIMETER DEMARCATION LINES—WALL-MOUNTED OPTION |
925 | COMMENTARY FIGURE 1025.2.4.3 PERIMETER DEMARCATION LINES—OPTIONS AT DOORS INTO EXIT ENCLOSURES COMMENTARY FIGURE 1025.2.5 OBSTACLE MARKINGS |
926 | COMMENTARY FIGURE 1025.2.6 EXIT DOOR TO EXTERIOR EXAMPLES COMMENTARY FIGURE 1025.2.6.1 EMERGENCY EXIT SYMBOL |
928 | SECTION 1026 HORIZONTAL EXITS COMMENTARY FIGURE 1026.1 TYPICAL HORIZONTAL EXITS |
930 | COMMENTARY FIGURE 1026.4.2 REFUGE AREA EXCEPTION SECTION 1027 EXTERIOR EXIT STAIRWAYS AND RAMPS |
932 | COMMENTARY FIGURE 1027.3 EXTERIOR STAIRWAY |
933 | COMMENTARY FIGURE 1027.5 EXTERIOR BALCONY AND STAIRWAY ADJACENT TO LOT LINE |
934 | COMMENTARY FIGURE 1027.6(1) PROTECTION OF EXTERIOR STAIRWAYS |
935 | COMMENTARY FIGURE 1027.6(2) EXTERIOR BALCONY WITH REMOTE STAIRWAYS SECTION 1028 EXIT DISCHARGE |
936 | COMMENTARY FIGURE 1027.6(3) EXAMPLE OF EXCEPTION 3 |
937 | COMMENTARY FIGURE 1028.2(1) PROTECTION OF LOBBY WITH AN EXIT DISCHARGE |
938 | COMMENTARY FIGURE 1028.2(2) VESTIBULE WITH EXIT DISCHARGE |
939 | COMMENTARY FIGURE 1028.2(3) SEPARATION DETAILS FOR VESTIBULE WITH EXIT DISCHARGE SECTION 1029 EGRESS COURTS |
940 | SECTION 1030 ASSEMBLY |
941 | COMMENTARY FIGURE 1030.1.1 EXAMPLE OF BLEACHERS |
942 | COMMENTARY FIGURE 1030.2 GROUP A-1 WITH WAITING SPACE |
944 | COMMENTARY FIGURE 1030.6.1(1) COMPUTATION OF WIDTH FOR STEPPED AISLES |
945 | COMMENTARY FIGURE 1030.6.1(2) COMPUTATION OF WIDTH FOR LEVEL, SLOPED OR RAMPED AISLES |
946 | TABLE 1030.6.2 CAPACITY FOR AISLES FOR SMOKE-PROTECTED ASSEMBLY COMMENTARY FIGURE 1030.6.2.2(1) ROOF HEIGHT (CONVEX DOME ROOF) |
947 | COMMENTARY FIGURE 1030.6.2.2(2) ROOF HEIGHT (CONCAVE SUSPENDED ROOF) COMMENTARY FIGURE 1029.6.2.3(1) INDOOR SEATING SPRINKLERED AREAS (CONVEX DOME ROOF) |
948 | COMMENTARY FIGURE 1029.6.2.3(2) INDOOR SEATING SPRINKLERED AREAS (CONCAVE SUSPENDED ROOF) |
951 | COMMENTARY FIGURE 1030.8.1 PATH THROUGH ADJACENT ROWS |
952 | COMMENTARY FIGURE 1030.9.2 TYPICAL AISLE CATCHMENTS |
953 | COMMENTARY FIGURE 1030.9.3 COMPUTATION OF EXIT PASSAGE FOR CONVERGING AISLES COMMENTARY FIGURE 1030.9.4 AISLE WITH OPPOSITE EXITS |
954 | COMMENTARY FIGURE 1030.9.5 TYPICAL BALCONY ARRANGEMENT |
955 | COMMENTARY FIGURE 1030.9.7(1) EXAMPLE OF A CONTINUATION OF A STEPPED AISLE UP TO A CROSS AISLE COMMENTARY FIGURE 1030.9.7(2) EXAMPLE OF A CONTINUATION OF A STEPPED AISLE DOWN TO A FLOOR |
956 | COMMENTARY FIGURE 1029.10.2.1(1) TRANSITION BETWEEN STAIRWAY AND STEPPED AISLE AT THE HIGHER END OF THE FLIGHT COMMENTARY FIGURE 1030.10.2.1(2) TRANSITION BETWEEN STEPPED AISLE AND STAIRWAY AT THE LOWER END OF THE FLIGHT |
957 | COMMENTARY FIGURE 1030.10.2.2 EXAMPLE OF A STEPPED AISLE TURNING TO A STAIRWAY COMMENTARY FIGURE 1030.11 EXAMPLE OF TURNS IN A STEPPED AISLE AT A VOMITORY |
958 | COMMENTARY FIGURE 1030.13.1 AISLE AND AISLE ACCESSWAY MEASUREMENT WITH SEATING AND TABLES |
959 | COMMENTARY FIGURE 1030.13.1.1 ACCESS FOR TABLES AND SEATING |
960 | COMMENTARY FIGURE 1030.13.2(1) MINIMUM REQUIRED ROW WIDTH CLEARANCE FOR AISLE ACCESSWAYS COMMENTARY FIGURE 1030.13.2(2) EXAMPLE OF FOLDING TABLET ARMS |
961 | COMMENTARY FIGURE 1030.13.2.1 TYPICAL DUAL-ACCESS ROW—MINIMUM AISLE ACCESSWAY WIDTH |
962 | TABLE 1030.13.2.1 SMOKE-PROTECTED OR OPEN-AIR ASSEMBLY AISLE ACCESSWAYS COMMENTARY FIGURE 1030.13.2.2 TYPICAL SINGLE-ACCESS ROW—MINIMUM AISLE ACCESSWAY WIDTH FOR SEATS WITH BACKRESTS |
964 | COMMENTARY FIGURE 1030.14.2.1 TYPICAL SEATING PLATFORMS ALSO USED AS STEPPING AISLES COMMENTARY FIGURE 1030.14.2.2 TYPICAL RISER CONSTRUCTION IN STEPPED AISLES |
966 | COMMENTARY FIGURE 1030.16(1) TYPICAL RAILING FOR RAMPED AISLES WITH RAILING IN THE AISLE COMMENTARY FIGURE 1030.16(2) EXAMPLE OF STEPPED AISLES ADJACENT TO SEATING PLATFORMS |
967 | COMMENTARY FIGURE 1030.16.1 DISCONTINUOUS AISLE HANDRAILS |
969 | COMMENTARY FIGURE 1030.17.3 TYPICAL BALCONY GUARDS AT FASCIA SECTION 1031 EMERGENCY ESCAPE AND RESCUE |
971 | COMMENTARY FIGURE 1031.3.1 EMERGENCY ESCAPE WINDOW |
972 | COMMENTARY FIGURE 1031.5 AREA WELLS AT EMERGENCY ESCAPE WINDOWS |
973 | BIBLIOGRAPHY |
976 | CHAPTER 11: ACCESSIBILITY GENERAL COMMENTS HISTORY—BUILDING CODES AND FEDERAL LAWS |
978 | PHILOSOPHY |
979 | PURPOSE SECTION 1101 GENERAL SECTION 1102 COMPLIANCE |
980 | SECTION 1103 SCOPING REQUIREMENTS |
981 | COMMENTARY FIGURE 1103.2.6 EXAMPLE OF THE EXCEPTION FOR RAISED AREA |
982 | COMMENTARY FIGURE 1103.2.8 EXAMPLE OF A RAISED AREA IN A PLACE OF RELIGIOUS WORSHIP |
983 | SECTION 1104 ACCESSIBLE ROUTE |
985 | COMMENTARY FIGURE1104.3.2 EXAMPLE OF PRESS BOX ACCESSED FROM BLEACHER SEATING |
987 | SECTION 1105 ACCESSIBLE ENTRANCES |
988 | COMMENTARY FIGURE1105.1.1 EXAMPLE OF LOW-ENERGY POWER-OPERATED DOOR TABLE 1105.1.1 PUBLIC ENTRANCE WITH POWER-OPERATED DOORa |
989 | COMMENTARY FIGURE 1105.1.3 EXAMPLE OF ELEVATED WALKWAY ENTRANCE SECTION 1106 PARKING AND PASSENGER LOADING FACILITIES |
990 | TABLE 1106.2 ACCESSIBLE PARKING SPACES |
992 | COMMENTARY FIGURE 1106.7 EXAMPLE OF ACCESSIBLE PARKING SPACES |
993 | SECTION 1107 MOTOR-VEHICLE-RELATED FACILITIES |
994 | SECTION 1108 DWELLING UNITS AND SLEEPING UNITS |
1005 | TABLE 1108.6.1.1 ACCESSIBLE DWELLING UNITS AND SLEEPING UNITS COMMENTARY FIGURE 1108.6.1.1 DETERMINING THE NUMBER OF ACCESSIBLE UNITS IN GROUP R-1 |
1008 | COMMENTARY FIGURE 1108.6.2.2.2(1) BUILDING WITH FIRE WALLS IS TREATED AS A SINGLE STRUCTURE COMMENTARY FIGURE 1108.6.2.2.2(2) TWO STRUCTURALLY JOINED BUILDINGS ARE TREATED AS A SINGLE STRUCTURE |
1009 | COMMENTARY FIGURE 1108.6.2.3 EXAMPLE OF SLEEPING UNIT WITH MULTIPLE BEDROOMS |
1011 | COMMENTARY FIGURE 1108.7.1.1 DWELLING UNITS ON ONE STORY |
1012 | COMMENTARY FIGURE 1108.7.1.2(1) BUILDING HAS TWO ACCESSIBLE LEVELS, EACH WITH AN ACCESSIBLE ENTRANCE ON AN ACCESSIBLE ROUTE COMMENTARY FIGURE 1108.7.1.2(2) SINGLE BUILDING WITH MULTIPLE COMMON ENTRANCES—LOWER GROUND FLOOR UNITS MAY BE COVERED |
1013 | COMMENTARY FIGURE 1108.7.1.2(3) EXAMPLE FOR GRADE CALCULATIONS |
1014 | COMMENTARY FIGURE 1108.7.2(1) BUILDINGS WITH ELEVATOR(S): ALL SINGLE-STORY UNITS AND THE PRIMARY ENTRY LEVEL OF MULTISTORY UNITS COMMENTARY FIGURE 1108.7.2(2) GROUND FLOOR UNITS IN BUILDINGS OF FOUR OR MORE UNITS |
1015 | COMMENTARY FIGURE 1108.7.3(1) DWELLING UNITS OVER SHOPS AND GARAGES COMMENTARY FIGURE 1108.7.3(2) ELEVATOR TO FIRST FLOOR OF DWELLING UNITS ABOVE GRADE OR ENTRANCE LEVEL DOES NOT MAKE AN ELEVATOR BUILDING SECTION 1109 SPECIAL OCCUPANCIES |
1016 | COMMENTARY FIGURE 1108.7.4 SITE ANALYSIS TEST: THE NUMBER OF COVERED UNITS |
1017 | COMMENTARY FIGURE 1108.7.5(1) BUILDING MEETS BOTH ACCESSIBILITY CRITERIA FOR EXEMPTION COMMENTARY FIGURE 1108.7.5(2) BUILDING MUST COMPLY WITH ACCESSIBILITY REQUIREMENTS |
1018 | TABLE 1109.2.2.1 ACCESSIBLE WHEELCHAIR SPACES |
1019 | COMMENTARY FIGURE 1109.2.2.3(1) EXAMPLE OF BOX SEATING IN A SPORTS VENUE COMMENTARY FIGURE 1109.2.2.3(2) EXAMPLE OF BOX SEATING IN A THEATER |
1020 | COMMENTARY FIGURE 1109.2.6 EXAMPLE OF VENUE WITH LAWN SEATING AND FIXED SEATING |
1021 | TABLE 1109.2.7.1 RECEIVERS FOR ASSISTIVE LISTENING SYSTEMS |
1023 | COMMENTARY FIGURE 1109.2.9.1 EXAMPLE OF DINING SURFACES TABLE 1109.3 ACCESSIBLE SELF-SERVICE STORAGE FACILITIES |
1024 | COMMENTARY FIGURE 1109.4.1.2 GALLERY SEATING |
1025 | COMMENTARY FIGURE 1109.4.1.5 COURTROOM WELL WORK STATIONS SECTION 1110 OTHER FEATURES AND FACILITIES |
1026 | COMMENTARY FIGURE 1110.2(1) SIDE APPROACH WHEELCHAIR TRANSFER |
1027 | COMMENTARY FIGURE 1110.2(2) EXAMPLES OF TOILET ROOM PLANS WITH OVERLAP |
1030 | COMMENTARY FIGURE 1110.2.2 EXAMPLE OF ASSISTED TOILETING REQUIREMENTS |
1031 | COMMENTARY FIGURE 1110.2.3(1) EXAMPLES OF ASSISTED TOILETING REQUIREMENTS COMMENTARY FIGURE 1110.2.3(2) EXAMPLES OF ASSISTED BATHING REQUIREMENTS COMMENTARY FIGURE 1110.2.3(3) EXAMPLES OF ASSISTED BATHING REQUIREMENTS |
1034 | COMMENTARY FIGURE 1110.2.4(1) AMBULATORY-ACCESSIBLE COMPARTMENT COMMENTARY FIGURE 1110.2.4(2) WHEELCHAIR-ACCESSIBLE COMPARTMENT; OUT-SWINGING DOOR |
1035 | COMMENTARY FIGURE 1110.2.4(3) WHEELCHAIR-ACCESSIBLE COMPARTMENT; IN-SWINGING DOOR COMMENTARY FIGURE 1110.4 EXAMPLE OF KITCHENETTE |
1036 | COMMENTARY FIGURE 1110.5.1 EXAMPLE OF DRINKING FOUNTAINS FOR PERSONS USING WHEELCHAIRS (LOW) AND STANDING PERSONS (HIGH) |
1039 | COMMENTARY FIGURE 1110.9(1) PLATFORM (WHEELCHAIR) LIFT COMMENTARY FIGURE 1110.9(2) STAIRWAY CHAIRLIFT |
1040 | COMMENTARY FIGURE 1110.10 EXAMPLE OF LOCKER AREA |
1041 | COMMENTARY FIGURE 1110.11 DETECTABLE WARNINGS AT TRANSIT PLATFORM EDGE COMMENTARY FIGURE 1110.12 EXAMPLE OF ACCESSIBLE WORK STATION |
1042 | COMMENTARY FIGURE 1110.12.2.1 EXAMPLE OF ACCESSIBLE VISITOR’S CUBICLE |
1043 | TABLE 1110.13.1 ACCESSIBLE CHECK-OUT AISLES COMMENTARY FIGURE 1110.13.1 EXAMPLE OF ACCESSIBLE CHECK-OUT COUNTER |
1044 | COMMENTARY FIGURE 1110.13.2 EXAMPLE OF SERVICE COUNTERS COMMENTARY FIGURE 1110.13.3 EXAMPLE OF SELF-SERVICE SHELVING |
1045 | COMMENTARY FIGURE 1110.14 EXAMPLE OF ACCESSIBLE DRESSING ROOM |
1046 | SECTION 1111 RECREATIONAL FACILITIES |
1047 | COMMENTARY FIGURE 1111.4.2 EXAMPLE OF TEAM SEATING IN A BASEBALL DUGOUT COMMENTARY FIGURE 1111.4.4 EXAMPLE OF COURT SPORTS |
1048 | COMMENTARY FIGURE 1111.4.6 EXAMPLE OF RAISED REFEREE STAND COMMENTARY FIGURE 1111.4.8(1) EXAMPLE OF AN AMUSEMENT RIDE WITH A FIXED COURSE COMMENTARY FIGURE 1111.4.8(2) EXAMPLE OF AN AMUSEMENT RIDE WITH A FIXED COURSE |
1049 | COMMENTARY FIGURE 1111.4.8.1(1) EXAMPLE OF A PERSON IN A WHEELCHAIR MOVING ONTO A RIDE COMMENTARY FIGURE 1111.4.8.1(2) EXAMPLE OF A PERSON IN A WHEELCHAIR TRANSFERRING ONTO A RIDE SEAT |
1050 | COMMENTARY FIGURE 1111.4.8.3(1) EXAMPLE OF AN AMUSEMENT RIDE ADDRESSED IN EXCEPTION 1 COMMENTARY FIGURE 1111.4.8.3(2) EXAMPLE OF AN AMUSEMENT RIDE ADDRESSED IN EXCEPTION 2 |
1051 | TABLE 1111.4.9.1 BOAT SLIPS COMMENTARY FIGURE 1111.4.9.1 EXAMPLE OF BOAT SLIPS COMMENTARY FIGURE 1111.4.9.3 EXAMPLE OF BOAT LAUNCH RAMP WITH BOARDING PIER |
1052 | COMMENTARY FIGURE 1111.4.11 EXAMPLE OF AN ACCESSIBLE FISHING PLATFORM |
1053 | COMMENTARY FIGURE 1111.4.13 EXAMPLE OF AN ACCESSIBLE ROUTE TO A TRANSFER LOCATION FOR CONNECTED ELEVATED PLAY COMPONENTS COMMENTARY FIGURE 1111.4.14 PERMITTED MEANS OF POOL ACCESSa |
1054 | COMMENTARY FIGURE 1111.4.14.2 EXAMPLE OF A CATCH POOL FOR A WATER SLIDE SECTION 1112 SIGNAGE |
1055 | COMMENTARY FIGURE 1112.1 INTERNATIONAL SYMBOLS OF ACCESSIBILITY |
1057 | COMMENTARY FIGURE 1112.5 VARIABLE MESSAGE SIGNAGE |
1058 | BIBLIGRAPHY |
1060 | CHAPTER 12: INTERIOR ENVIRONMENT GENERAL COMMENTS PURPOSE |
1061 | SECTION 1201 GENERAL SECTION 1202 VENTILATION |
1063 | COMMENTARY FIGURE 1202.2(1) COMBINATION OF SOFFIT AND RIDGE VENTS COMMENTARY FIGURE 1202.2(2) VENTILATION OF RAFTER SPACE |
1066 | TABLE 1202.3 INSULATION FOR CONDENSATION CONTROL |
1068 | COMMENTARY FIGURE 1202.5.1 NATURAL LIGHT AND VENTILATION WINDOWS |
1069 | COMMENTARY FIGURE 1202.5.1.1 NATURAL VENTILATION FROM ADJOINING SPACE COMMENTARY FIGURE 1202.5.1.2 VENTILATION OPENINGS BELOW GRADE |
1070 | SECTION 1203 TEMPERATURE CONTROL SECTION 1204 LIGHTING |
1071 | COMMENTARY FIGURE 1204.2.1 NATURAL LIGHT FROM ADJACENT SPACE |
1072 | COMMENTARY FIGURE 1204.3 ARTIFICIAL LIGHTING IN A ROOM SECTION 1205 YARDS OR COURTS |
1073 | COMMENTARY FIGURE 1205.1 YARDS AND COURTS |
1074 | SECTION 1206 SOUND TRANSMISSION |
1075 | SECTION 1207 ENHANCED CLASSROOM ACOUSTICS SECTION 1208 INTERIOR SPACE DIMENSIONS |
1076 | COMMENTARY FIGURE 1208.2(1) MINIMUM CEILING HEIGHT—ALLOWABLE PROJECTIONS IN ONE- AND TWO-FAMILY DWELLINGS COMMENTARY FIGURE 1208.2(2) SLOPED CEILING HEIGHTS |
1077 | COMMENTARY FIGURE 1208.2.1 FURRED CEILING HEIGHTS SECTION 1209 ACCESS TO UNOCCUPIED SPACES |
1078 | SECTION 1210 TOILET AND BATHROOM REQUIREMENTS |
1079 | BIBLIOGRAPHY |
1080 | CHAPTER 13: ENEGY EFFICIENCY GENERAL COMMENTS PURPOSE SECTION 1301 GENERAL BIBLIOGRAPHY |
1082 | CHAPTER 14: EXTERIOR GENERAL COMMENTS PURPOSE SECTION 1401 GENERAL SECTION 1402 PERFORMANCE REQUIREMENTS |
1085 | SECTION 1403 MATERIALS |
1087 | SECTION 1404 INSTALLATION OF WALL COVERINGS TABLE 1404.2 MINIMUM THICKNESS OF WEATHER COVERINGS |
1089 | TABLE 1404.3(1) VAPOR RETARDER MATERIALS AND CLASSES |
1090 | TABLE 1404.3(2) VAPOR RETARDER OPTIONS TABLE 1404.3(3) CLASS III VAPOR RETARDERS TABLE 1404.3(4) CONTINUOUS INSULATION WITH CLASS II VAPOR RETARDER |
1091 | COMMENTARY FIGURE 1404.3(1) CLIMATE ZONES—FROM FIGURE C301.1 OF THE IECC |
1092 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1093 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1094 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1095 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1096 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1097 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1098 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1099 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1100 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1101 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1102 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1103 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1104 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1105 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1106 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1107 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1108 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1109 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1110 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1111 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1112 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1113 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1114 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1115 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1116 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1117 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1118 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1119 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1120 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1121 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1122 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1123 | COMMENTARY FIGURE 1404.3(2) CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY—FROM TABLE C301.1 OF THE IECC |
1124 | COMMENTARY FIGURE 1404.3(3) THERMAL CLIMATE ZONE DEFINITIONS—FROM TABLE C301.3 OF THE IECC COMMENTARY FIGURE 1404.4(1) FLASHING SIDING/ROOF INTERFACE COMMENTARY FIGURE 1404.4(2) FLASHING AT SIDING/WINDOW INTERFACE COMMENTARY FIGURE 1404.4(3) FLASHING UNDER WINDOW IN EXTERIOR WALL |
1125 | COMMENTARY FIGURE 1404.4(4) FLASHING AT VARIOUS POINTS COMMENTARY FIGURE 1404.4(5) FLASHING EXTENSION |
1127 | COMMENTARY FIGURE 1404.7 STONE VENEER WITH CONCRETE BACKING |
1129 | COMMENTARY FIGURE 1404.9 TERRA COTTA VENEER COMMENTARY FIGURE 1404.10(1) MASONRY VENEER ADHERED TO MASONRY BACKING |
1130 | COMMENTARY FIGURE 1404.10(2) MASONRY VENEER ADHERED TO STEEL-FRAME BACKING |
1135 | COMMENTARY FIGURE 1404.17 WOOD WEATHERBOARD ATTACHMENT SECTION 1405 COMBUSTIBLE MATERIALS ON THE EXTERIOR SIDE OF EXTERIOR WALLS |
1137 | TABLE 1405.1.1.1.2 MINIMUM FIRE SEPARATION FOR COMBUSTIBLE EXTERIOR WALL COVERINGS |
1138 | SECTION 1406 METAL COMPOSITE MATERIALS (MCM) |
1139 | COMMENTARY FIGURE 1406.1(1) CONTINUOUS EDGE GRIP SYSTEM COMMENTARY FIGURE 1406.1(2) SECTION THROUGH VERTICAL JOINT (HORIZONTAL JOINT SIMILAR) |
1140 | COMMENTARY FIGURE 1406.1(3) TYPICAL RUT AND RETURN SYSTEM SECTION THROUGH VERTICAL JOINT (HORIZONTAL JOINT SIMILAR) |
1141 | COMMENTARY FIGURE 1406.10(1) APPLICABLE STANDARDS MCMS |
1142 | SECTION 1407 EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) |
1143 | SECTION 1408 HIGH-PRESSURE DECORATIVE EXTERIOR-GRADE COMPACT LAMINATES (HPL) |
1145 | SECTION 1409 PLASTIC COMPOSITE DECKING BIBLIOGRAPHY |
1146 | CHAPTER 15: ROOF ASSEMBLIES AND ROOFTOP STRUCTURES GENERAL COMMENTS PURPOSE SECTION 1501 GENERAL SECTION 1502 ROOF DRAINAGE |
1147 | SECTION 1503 WEATHER PROTECTION |
1148 | SECTION 1504 PERFORMANCE REQUIREMENTS TABLE 1504.2 CLASSIFICATION OF STEEP SLOPE ROOF SHINGLES TESTED IN ACCORDANCE WITH ASTM D3161OR D7158 |
1151 | TABLE 1504.9 MINIMUM REQUIRED PARAPET HEIGHT (INCHES) FOR AGGREGATE SURFACED ROOFS SECTION 1505 FIRE CLASSIFICATION TABLE 1505.1 MINIMUM ROOF COVERING CLASSIFICATION FOR TYPES OF CONSTRUCTION |
1153 | SECTION 1506 MATERIALS SECTION 1507 REQUIREMENTS FOR ROOF COVERINGS |
1154 | TABLE 1507.1.1(1) UNDERLAYMENT TYPES |
1155 | TABLE 1507.1.1(2) UNDERLAYMENT APPLICATION |
1156 | TABLE 1507.1.1(3) UNDERLAYMENT ATTACHMENT |
1157 | COMMENTARY FIGURE 1507.1.2(1) POSSIBLE WATER DAMAGE AT ICE DAMS COMMENTARY FIGURE 1507.1.2(2) PROTECTIVE ICE SHIELD |
1159 | TABLE 1507.2.8.2 VALLEY LINING MATERIAL |
1161 | TABLE 1507.3.7 CLAY AND CONCRETE TILE ATTACHMENT |
1163 | TABLE 1507.4.3(1) METAL ROOF COVERINGS TABLE 1507.4.3(2) MINIMUM CORROSION RESISTANCE |
1165 | TABLE 1507.7.6 SLATE SHINGLE HEADLAP |
1166 | TABLE 1507.8.5 WOOD SHINGLE MATERIAL REQUIREMENTS TABLE 1507.8 WOOD SHINGLE AND SHAKE INSTALLATION |
1167 | TABLE 1507.8.7 WOOD SHINGLE WEATHER EXPOSURE AND ROOF SLOPE |
1168 | TABLE 1507.9.6 WOOD SHAKE MATERIAL REQUIREMENTS TABLE 1507.9.8 WOOD SHAKE WEATHER EXPOSURE AND ROOF SLOPE |
1169 | TABLE 1507.10.2 BUILT-UP ROOFING MATERIAL STANDARDS |
1170 | TABLE 1507.12.2 SINGLE-PLY ROOFING MATERIAL STANDARDS |
1171 | TABLE 1507.13.3 PROTECTIVE COATING MATERIAL STANDARDS |
1173 | SECTION 1508 ROOF INSULATION [BF] TABLE 1508.2 MATERIAL STANDARDS FOR ROOF INSULATION |
1174 | SECTION 1509 ROOF COATINGS TABLE 1509.2 ROOF COATING MATERIAL STANDARDS SECTION 1510 RADIANT BARRIERS INSTALLED ABOVE DECK SECTION 1511 ROOFTOP STRUCTURES |
1178 | SECTION 1512 REROOFING |
1180 | BIBLIOGRAPHY |
1182 | INDEX |
1220 | ADDITIONAL CODE RESOURCES FROM ICC |
1221 | ICC LEARNING CENTER |
1222 | ICC ASSESSMENT CENTER |
1223 | ICC DIGITAL CODES PREMIUM |