ICC IPC 2024 1stptg

$63.38

International Plumbing Code

Published By	Publication Date	Number of Pages
ICC	2024	275

Guaranteed Safe Checkout

Category: ICC

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

The 2024 International Codes (I-Codes ) have undergone substantial formatting changes as part of the digital transformation strategy of the International Code Council (ICC ) to improve the user experience. The changes, promoting a cleaner, more modern look and enhancing readability and sustainability, include: Single column text format and modernized font styles improves readability QR Codes replace vertical margin sidebars and arrows to identify code changes more accurately Shading for table headers and notes improves locating tables and applicable notes Grouping of associated content brings tables and figures immediately after the parent section Users have capability to validate authenticity of their book and register it with the ICC to receive incentives. The 2024 IPC provides minimum regulations for plumbing facilities and allows for the acceptance of new and innovative products, materials, and systems. Plumbing and plumbing fixture related accessibility provisions and requirements from the ICC A117.1 Accessibility Standard are also included, making the IPC the most comprehensive plumbing code. For the most current adoptions details go to International Code Adoptions. Important changes in the 2024 IPC include: Provisions added for support of buried piping beneath building where expansive soil conditions exist. Requirement added for tracer wire for buried plastic sewer piping. Option added for vacuum testing of DWV piping. Plumbing fixture requirements significantly updated for various Group I occupancies. Exception added for allowing special locking mechanism for doors to multiple-user toilet facilities. Plastic pans for gas-fired water heaters required to be tested in accordance with ASTM E84 or UL 723. Showerhead flow limited to 2.0 gpm with performance complying with high efficiency requirements. Installation standards added for solvent-cemented plastic piping joints. Standards added for chemical waste piping materials.

PDF Catalog

PDF Pages	PDF Title
1	2024 INTERNATIONAL PLUMBING CODE®
2	2024 INTERNATIONAL PLUMBING CODE®
3	COPYRIGHT
4	NEW DESIGN FOR THE 2024 INTERNATIONAL CODES
5	PREFACE FORMATTING CHANGES TO THE 2024 INTERNATIONAL CODES
12	CONTENTS
15	CHAPTER 1: SCOPE AND ADMINISTRATION PART 1—SCOPE AND APPLICATION SECTION 101—SCOPE AND GENERAL REQUIREMENTS SECTION 102—APPLICABILITY
16	PART 2—ADMINISTRATION AND ENFORCEMENT SECTION 103—CODE COMPLIANCE AGENCY SECTION 104—DUTIES AND POWERS OF THE CODE OFFICIAL
19	SECTION 105—PERMITS
20	SECTION 106—CONSTRUCTION DOCUMENTS SECTION 107—NOTICE OF APPROVAL SECTION 108—FEES
21	SECTION 109—SERVICE UTILITIES SECTION 110—TEMPORARY USES, EQUIPMENT AND SYSTEMS SECTION 111—INSPECTIONS AND TESTING
23	SECTION 112—MEANS OF APPEALS SECTION 113—BOARD OF APPEALS SECTION 114—VIOLATIONS
24	SECTION 115—STOP WORK ORDER
25	CHAPTER 2: DEFINITIONS SECTION 201—GENERAL SECTION 202—GENERAL DEFINITIONS
33	CHAPTER 3: GENERAL REGULATIONS SECTION 301—GENERAL SECTION 302—EXCLUSION OF MATERIALS DETRIMENTAL TO THE SEWER SYSTEM SECTION 303—MATERIALS
34	SECTION 304—RODENTPROOFING SECTION 305—PROTECTION OF PIPES AND PLUMBING SYSTEM COMPONENTS
35	SECTION 306—TRENCHING, EXCAVATION AND BACKFILL SECTION 307—STRUCTURAL SAFETY
36	SECTION 308—PIPING SUPPORT TABLE 308.5—HANGER SPACING
37	SECTION 309—FLOOD HAZARD RESISTANCE SECTION 310—TOILET FACILITIES REQUIREMENTS SECTION 311—TOILET FACILITIES FOR WORKERS SECTION 312—TESTS AND INSPECTIONS
38	SECTION 313—EQUIPMENT EFFICIENCIES SECTION 314—CONDENSATE DISPOSAL
39	TABLE 314.2.2 [M] TABLE 314.2.2—CONDENSATE DRAIN SIZING
40	SECTION 315—PENETRATIONS SECTION 316—ALTERNATIVE ENGINEERED DESIGN
41	CHAPTER 4: FIXTURES, FAUCETS AND FIXTURE FITTINGS SECTION 401—GENERAL SECTION 402—FIXTURE MATERIALS SECTION 403—MINIMUM PLUMBING FACILITIES
42	TABLE 403.1—MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2)
43	TABLE 403.1—MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2)—continued
44	TABLE 403.1—MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2)—continued
46	SECTION 404—ACCESSIBLE PLUMBING FACILITIES SECTION 405—INSTALLATION OF FIXTURES
47	SECTION 406—AUTOMATIC CLOTHES WASHERS
48	SECTION 407—BATHTUBS SECTION 408—BIDETS SECTION 409—DISHWASHING MACHINES SECTION 410—DRINKING FOUNTAINS
49	SECTION 411—EMERGENCY SHOWERS AND EYEWASH STATIONS SECTION 412—FAUCETS AND FIXTURE FITTINGS
50	SECTION 413—FLOOR AND TRENCH DRAINS SECTION 414—FLOOR SINKS SECTION 415—FLUSHING DEVICES FOR WATER CLOSETS AND URINALS
51	SECTION 416—FOOD WASTE DISPOSER UNITS SECTION 417—GARBAGE CAN WASHERS SECTION 418—LAUNDRY TRAYS SECTION 419—LAVATORIES SECTION 420—MANUAL FOOD AND BEVERAGE DISPENSING EQUIPMENT SECTION 421—SHOWERS
52	SECTION 422—SINKS
53	SECTION 423—SPECIALTY PLUMBING FIXTURES SECTION 424—URINALS SECTION 425—WATER CLOSETS SECTION 426—WHIRLPOOL BATHTUBS
54	CHAPTER 5: WATER HEATERS SECTION 501—GENERAL SECTION 502—INSTALLATION
55	SECTION 503—CONNECTIONS SECTION 504—SAFETY DEVICES
56	SECTION 505—INSULATION
57	CHAPTER 6: WATER SUPPLY AND DISTRIBUTION SECTION 601—GENERAL SECTION 602—WATER REQUIRED SECTION 603—WATER SERVICE
58	SECTION 604—DESIGN OF BUILDING WATER DISTRIBUTION SYSTEM TABLE 604.3—WATER DISTRIBUTION SYSTEM DESIGN CRITERIA REQUIRED CAPACITY AT FIXTURE SUPPLY PIPE OUTLETS
59	TABLE 604.4—MAXIMUM FLOW RATES AND CONSUMPTION FOR PLUMBING FIXTURES AND FIXTURE FITTINGS TABLE 604.5—MINIMUM SIZES OF FIXTURE WATER SUPPLY PIPES
60	TABLE 604.10.1—MANIFOLD SIZING SECTION 605—MATERIALS, JOINTS AND CONNECTIONS
61	TABLE 605.3—WATER SERVICE PIPE TABLE 605.4—WATER DISTRIBUTION PIPE
62	TABLE 605.4—WATER DISTRIBUTION PIPE—continued TABLE 605.5—PIPE FITTINGS
63	TABLE 605.7—VALVES TABLE 605.8—MANUFACTURED PIPE NIPPLES
66	SECTION 606—INSTALLATION OF THE BUILDING WATER DISTRIBUTION SYSTEM
67	TABLE 606.5.4—SIZES FOR OVERFLOW PIPES FOR WATER SUPPLY TANKS TABLE 606.5.7—SIZE OF DRAIN PIPES FOR WATER TANKS SECTION 607—HOT WATER SUPPLY SYSTEM
68	SECTION 608—PROTECTION OF POTABLE WATER SUPPLY
69	TABLE 608.1—APPLICATION OF BACKFLOW PREVENTERS
70	FIGURE 608.9.1—PICTOGRAPH—DO NOT DRINK
71	TABLE 608.9.2.2—SIZE OF PIPE IDENTIFICATION
72	TABLE 608.16.1—MINIMUM REQUIRED AIR GAPS
74	TABLE 608.18.1—DISTANCE FROM CONTAMINATION TO PRIVATE WATER SUPPLIES AND PUMP SUCTION LINES SECTION 609—HEALTH CARE PLUMBING
75	SECTION 610—DISINFECTION OF POTABLE WATER SYSTEM SECTION 611—DRINKING WATER TREATMENT UNITS SECTION 612—SOLAR SYSTEMS SECTION 613—TEMPERATURE CONTROL DEVICES AND VALVES
76	CHAPTER 7: SANITARY DRAINAGE SECTION 701—GENERAL SECTION 702—MATERIALS TABLE 702.1—ABOVE-GROUND DRAINAGE AND VENT PIPE
77	TABLE 702.1—ABOVE-GROUND DRAINAGE AND VENT PIPE—continued TABLE 702.2—UNDERGROUND BUILDING DRAINAGE AND VENT PIPE TABLE 702.3—BUILDING SEWER PIPE
78	TABLE 702.3—BUILDING SEWER PIPE—continued TABLE 702.4—PIPE FITTINGS TABLE 702.6—CHEMICAL WASTE DRAINAGE SYSTEM PIPE AND FITTINGS
79	SECTION 703—BUILDING SEWER SECTION 704—DRAINAGE PIPING INSTALLATION TABLE 704.1—SLOPE OF HORIZONTAL DRAINAGE PIPE SECTION 705—JOINTS
82	TABLE 705.18—CAULKING FERRULE SPECIFICATIONS TABLE 705.19—SOLDERING BUSHING SPECIFICATIONS SECTION 706—CONNECTIONS BETWEEN DRAINAGE PIPING AND FITTINGS TABLE 706.3—FITTINGS FOR CHANGE IN DIRECTION
83	TABLE 706.3—FITTINGS FOR CHANGE IN DIRECTION—continued SECTION 707—PROHIBITED JOINTS AND CONNECTIONS SECTION 708—CLEANOUTS
84	SECTION 709—FIXTURE UNITS TABLE 709.1—DRAINAGE FIXTURE UNITS FOR FIXTURES AND GROUPS
85	TABLE 709.1—DRAINAGE FIXTURE UNITS FOR FIXTURES AND GROUPS—continued TABLE 709.2—DRAINAGE FIXTURE UNITS FOR FIXTURE DRAINS OR TRAPS
86	SECTION 710—DRAINAGE SYSTEM SIZING TABLE 710.1(1)—BUILDING DRAINS AND SEWERS TABLE 710.1(2)—HORIZONTAL FIXTURE BRANCHES AND STACKSa
87	TABLE 710.1(2)—HORIZONTAL FIXTURE BRANCHES AND STACKSa SECTION 711—OFFSETS IN DRAINAGE PIPING IN BUILDINGS OF FIVE STORIES OR MORE SECTION 712—SUMPS AND EJECTORS
88	TABLE 712.4.2—MINIMUM CAPACITY OF SEWAGE PUMP OR SEWAGE EJECTOR SECTION 713—COMPUTERIZED DRAINAGE DESIGN SECTION 714—BACKWATER VALVES
89	SECTION 715—VACUUM DRAINAGE SYSTEMS SECTION 716—REPLACEMENT OF UNDERGROUND BUILDING SEWERS AND BUILDING DRAINS BY PIPE-BURSTING METHODS SECTION 717—RELINING BUILDING SEWERS AND BUILDING DRAINS
90	SECTION 718—REHABILITATION OF BUILDING SEWERS AND BUILDING DRAINS
91	CHAPTER 8: INDIRECT/SPECIAL WASTE SECTION 801—GENERAL SECTION 802—INDIRECT WASTES
92	SECTION 803—SPECIAL WASTES
93	CHAPTER 9: VENTS SECTION 901—GENERAL SECTION 902—MATERIALS SECTION 903—VENT TERMINALS
94	SECTION 904—OUTDOOR VENT EXTENSIONS SECTION 905—VENT CONNECTIONS AND GRADES SECTION 906—VENT PIPE SIZING
95	TABLE 906.1—SIZE AND DEVELOPED LENGTH OF STACK VENTS AND VENT STACKS
96	SECTION 907—VENTS FOR STACK OFFSETS SECTION 908—RELIEF VENTS—STACKS OF MORE THAN 10 BRANCH INTERVALS SECTION 909—FIXTURE VENTS
97	TABLE 909.1—MAXIMUM DISTANCE OF FIXTURE TRAP FROM VENT SECTION 910—INDIVIDUAL VENT SECTION 911—COMMON VENT TABLE 911.3—COMMON VENT SIZES SECTION 912—WET VENTING
98	TABLE 912.3—WET VENT SIZE SECTION 913—WASTE STACK VENT TABLE 913.4—WASTE STACK VENT SIZE SECTION 914—CIRCUIT VENTING
99	SECTION 915—COMBINATION WASTE AND VENT SYSTEM TABLE 915.2.2—SIZE OF COMBINATION WASTE AND VENT PIPE SECTION 916—ISLAND FIXTURE VENTING
100	SECTION 917—SINGLE-STACK VENT SYSTEM TABLE 917.2—SINGLE STACK SIZE
101	SECTION 918—AIR ADMITTANCE VALVES SECTION 919—ENGINEERED VENT SYSTEMS
102	TABLE 919.2—MINIMUM DIAMETER AND MAXIMUM LENGTH OFINDIVIDUAL BRANCH FIXTURE VENTS AND INDIVIDUAL FIXTURE HEADER VENTS FOR SMOOTH PIPES SECTION 920—COMPUTERIZED VENT DESIGN
103	CHAPTER 10: TRAPS, INTERCEPTORS AND SEPARATORS SECTION 1001—GENERAL SECTION 1002—TRAP REQUIREMENTS
104	SECTION 1003—INTERCEPTORS AND SEPARATORS
105	TABLE 1003.3.5.1—CAPACITY OF GREASE INTERCEPTORSa
106	SECTION 1004—MATERIALS, JOINTS AND CONNECTIONS
107	CHAPTER 11: STORM DRAINAGE SECTION 1101—GENERAL SECTION 1102—MATERIALS TABLE 1102.4—BUILDING STORM SEWER PIPE
108	TABLE 1102.4—BUILDING STORM SEWER PIPE—contin TABLE 1102.5—SUBSOIL DRAIN PIPE TABLE 1102.7—PIPE FITTINGS
109	SECTION 1103 —TRAPS SECTION 1104—CONDUCTORS AND CONNECTIONS SECTION 1105—ROOF DRAINS SECTION 1106—SIZE OF CONDUCTORS, LEADERS AND STORM DRAINS
110	FIGURE 1106.1(1)—100-YEAR, 1-HOUR RAINFALL (INCHES) WESTERN UNITED STATES
111	FIGURE 1106.1(2)—100-YEAR, 1-HOUR RAINFALL (INCHES) CENTRAL UNITED STATES
112	FIGURE 1106.1(3)—100-YEAR, 1-HOUR RAINFALL (INCHES) EASTERN UNITED STATES
113	FIGURE 1106.1(4)—100-YEAR, 1-HOUR RAINFALL (INCHES) ALASKA
114	FIGURE 1106.1(5)—100-YEAR, 1-HOUR RAINFALL (INCHES) HAWAII TABLE 1106.2—STORM DRAIN PIPE SIZING
115	TABLE 1106.2—STORM DRAIN PIPE SIZING—continued TABLE 1106.3—VERTICAL LEADER SIZING
116	TABLE 1106.6—HORIZONTAL GUTTER SIZING SECTION 1107—SIPHONIC ROOF DRAINAGE SYSTEMS SECTION 1108—SECONDARY (EMERGENCY) ROOF DRAINS SECTION 1109—COMBINED SANITARY AND STORM PUBLIC SEWER SECTION 1110—CONTROLLED FLOW ROOF DRAIN SYSTEMS
117	SECTION 1111—SUBSOIL DRAINS SECTION 1112—BUILDING SUBDRAINS SECTION 1113—SUMPS AND PUMPING SYSTEMS
118	CHAPTER 12: SPECIAL PIPING AND STORAGE SYSTEMS SECTION 1201—GENERAL SECTION 1202—MEDICAL GASES SECTION 1203—OXYGEN SYSTEMS
119	CHAPTER 13: NONPOTABLE WATER SYSTEMS SECTION 1301—GENERAL FIGURE 1301.3—PICTOGRAPH—DO NOT DRINK
121	SECTION 1302 —ON-SITE NONPOTABLE WATER REUSE SYSTEMS
122	TABLE 1302.7.1—LOCATION OF NONPOTABLE WATER REUSE STORAGE TANKS
123	SECTION 1303—NONPOTABLE RAINWATER COLLECTION AND DISTRIBUTION SYSTEMS
124	TABLE 1303.10.1—LOCATION OF RAINWATER STORAGE TANKS
125	SECTION 1304—RECLAIMED WATER SYSTEMS
126	CHAPTER 14: SUBSURFACE GRAYWATER SOIL ABSORPTION SYSTEMS SECTION 1401—GENERAL SECTION 1402—SYSTEM DESIGN AND SIZING
127	TABLE 1402.3—LOCATION OF SUBSURFACE GRAYWATER SOIL ABSORPTION SYSTEM SECTION 1403—INSTALLATION TABLE 1403.1.1—DESIGN LOADING RATE
128	TABLE 1403.2—DISTRIBUTION PIPE
129	CHAPTER 15: REFERENCED STANDARDS AISI ANSI ASHRAE ASME
131	ASPE ASSE
134	ASTM
139	AWS AWWA
140	CISPI CSA
142	IAPMO
143	ICC ISEA MSS
144	NFPA NGWA NSF
145	PDI PSAI UL
146	APPENDIX A: PLUMBING PERMIT FEE SCHEDULE SECTION A101—PLUMBING PERMIT FEE SCHEDULE TABLE A101.1—EXAMPLE OF PERMIT FEE SCHEDULE
147	APPENDIX B: RATES OF RAINFALL FOR VARIOUS CITIES SECTION B101—RATES OF RAINFALL FOR VARIOUS CITIES TABLE B101.1—RATES OF RAINFALL FOR VARIOUS CITIESa
148	TABLE B101.1—RATES OF RAINFALL FOR VARIOUS CITIESa—continued
149	TABLE B101.1—RATES OF RAINFALL FOR VARIOUS CITIESa—continued
150	TABLE B101.1—RATES OF RAINFALL FOR VARIOUS CITIESa—continued
151	TABLE B101.1—RATES OF RAINFALL FOR VARIOUS CITIESa—continued
152	TABLE B101.1—RATES OF RAINFALL FOR VARIOUS CITIESa—continued
153	APPENDIX C: STRUCTURAL SAFETY SECTION C101—CUTTING, NOTCHING AND BORING IN STRUCTURAL STEEL MEMBERS
154	APPENDIX D: DEGREE DAY AND DESIGN TEMPERATURES SECTION D101—DEGREE DAY AND DESIGN TEMPERATURES TABLE D101.1—DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES
155	TABLE D101.1—DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES—continued
156	TABLE D101.1—DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES—continued
157	TABLE D101.1—DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES—continued
158	TABLE D101.1—DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES—continued
159	TABLE D101.1—DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES—continued
160	APPENDIX E: SIZING OF WATER PIPING SYSTEM SECTION E101—GENERAL SECTION E102—INFORMATION REQUIRED SECTION E103 —SELECTION OF PIPE SIZE
163	TABLE E103.3(1)—RECOMMENDED TABULAR ARRANGEMENT FOR USE IN SOLVING PIPE SIZING PROBLEMS
164	TABLE E103.3(1)—RECOMMENDED TABULAR ARRANGEMENT FOR USE IN SOLVING PIPE SIZING PROBLEMS—continued
165	FIGURE E103.3(1)—EXAMPLE—SIZING TABLE E103.3(2)—LOAD VALUES ASSIGNED TO FIXTURESa
166	TABLE E103.3(2)—LOAD VALUES ASSIGNED TO FIXTURESa—continued FIGURE E103.3(2)—FRICTION LOSS IN SMOOTH PIPEa (TYPE K, ASTM B88 COPPER TUBING)
167	TABLE E103.3(3)—TABLE FOR ESTIMATING DEMAND
168	TABLE E103.3(3)—TABLE FOR ESTIMATING DEMAND—continued FIGURE E103.3(3)—FRICTION LOSS IN SMOOTH PIPEa (TYPE L, ASTM B88 COPPER TUBING)
169	TABLE E103.3(4)—LOSS OF PRESSURE THROUGH TAPS AND TEES IN POUNDS PER SQUARE INCH (psi)
170	FIGURE E103.3(4)—FRICTION LOSS IN SMOOTH PIPEa (TYPE M, ASTM B88 COPPER TUBING) TABLE E103.3(5)—ALLOWANCE IN EQUIVALENT LENGTHS OF PIPE FOR FRICTION LOSS IN VALVES AND THREADED FITTINGS (feet)
171	TABLE E103.3(5)—ALLOWANCE IN EQUIVALENT LENGTHS OF PIPE FOR FRICTION LOSS IN VALVES AND THREADED FITTINGS (feet)—continued FIGURE E103.3(5)—FRICTION LOSS IN FAIRLY SMOOTH PIPEa
172	TABLE E103.3(6)—PRESSURE LOSS IN FITTINGS AND VALVES EXPRESSED AS EQUIVALENT LENGTH OF TUBEa (feet)
173	FIGURE E103.3(6)—FRICTION LOSS IN FAIRLY ROUGH PIPEa
174	FIGURE E103.3(7)—FRICTION LOSS IN ROUGH PIPEa
177	TABLE E103.3.1(1)—SUMMATION OF DEVELOPED PIPE LENGTHS TABLE E103.3.1(2)—FITTING PRESSURE LOSSES EXPRESSED IN EQUIVALENT LENGTHS (formerly Table E1) TABLE E103.3.1(3)—TOTAL FRICTION LOSS EQUIVALENT PIPING LENGTH (formerly Table E2) SECTION E104—SELECTION OF PIPE SIZE
178	TABLE E104.1—MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES (w.s.f.u.)
180	SECTION E105 —DETERMINATION OF PIPE VOLUMES TABLE E105.1—INTERNAL VOLUME OF VARIOUS WATER DISTRIBUTION TUBING
181	[A] APPENDIX F: BOARD OF APPEALS [A] SECTION F101—GENERAL
183	INDEX
190	RESOURCE A PLUMBING PROVISIONS EXCERPTED FROM:ICC A117.1–2017 STANDARD FOR ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES
192	ICC A117.1-2017 STANDARD FOR ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES
193	COPYRIGHT
194	TABLE OF CONTENTS
196	CHAPTER 1: APPLICATION AND ADMINISTRATION SECTION 101—TITLE SECTION 102—PURPOSE SECTION 103—HUMAN FACTOR PROVISIONS SECTION 104—COMPLIANCE ALTERNATIVES SECTION 105—CONVENTIONS
197	FIGURE 105.4 GRAPHIC CONVENTION FOR FIGURES SECTION 106—REFERENCED DOCUMENTS
198	SECTION 107—DEFINITIONS
201	CHAPTER 3: BUILDING BLOCKS SECTION 301—GENERAL SECTION 302—FLOOR SURFACES FIGURE 302.2 CARPET ON FLOOR SURFACES FIGURE 302.3 OPENINGS IN FLOOR SURFACES SECTION 303—CHANGES IN LEVEL
202	FIGURE 303.2 VERTICAL CHANGE IN LEVEL FIGURE 303.3 BEVELED CHANGES IN LEVEL SECTION 304—TURNING SPACE
203	FIGURE 304.3.1.1 CIRCULAR TURNING SPACE – NEW BUILDINGS – SIZE AND OVERLAP FIGURE 304.3.1.2 CIRCULAR TURNING SPACE – EXISTING BUILDINGS – SIZE AND OVERLAP
204	FIGURE 304.3.2.1(A) T-SHAPED TURNING SPACE – NEW BUILDINGS – OPTION 1 FIGURE 304.3.2.1(B) T-SHAPED TURNING SPACE – NEW BUILDINGS – OPTION 2 FIGURE 304.3.2.1(C) T-SHAPED TURNING SPACE – NEW BUILDINGS – OPTION 3
205	FIGURE 304.3.2.1.1 T-SHAPED TURNING SPACE – NEW BUILDINGS – OVERLAP FIGURE 304.3.2.2 T-SHAPED TURNING SPACE – EXISTING BUILDINGS – SIZE
206	FIGURE 304.3.2.2.1 T-SHAPED TURNING SPACE – EXISTING BUILDINGS – OVERLAP SECTION 305—CLEAR FLOOR SPACE FIGURE 305.3.1 SIZE OF CLEAR FLOOR SPACE – NEW BUILDINGS FIGURE 305.3.2 SIZE OF CLEAR FLOOR SPACE – EXISTING BUILDINGS
207	FIGURE 305.5(A) POSITION OF CLEAR FLOOR SPACE – FORWARD FIGURE 305.5(B) POSITION OF CLEAR FLOOR SPACE – PARALLEL FIGURE 305.7.1 MANEUVERING CLEARANCE IN AN ALCOVE – PARALLEL APPROACH
208	FIGURE 305.7.2 MANEUVERING CLEARANCE IN AN ALCOVE – FORWARD APPROACH SECTION 306—KNEE AND TOE CLEARANCE FIGURE 306.2(A) TOE CLEARANCE – ELEVATION FIGURE 306.2(B) TOE CLEARANCE – PLAN
209	FIGURE 306.3(A) KNEE CLEARANCE – ELEVATION FIGURE 306.3(B) KNEE CLEARANCE – PLAN SECTION 307—PROTRUDING OBJECTS
210	FIGURE 307.2 LIMITS OF PROTRUDING OBJECTS FIGURE 307.3(A) POST-MOUNTED PROTRUDING OBJECTS
211	FIGURE 307.3(B) POST-MOUNTED PROTRUDING OBJECTS FIGURE 307.4 REDUCED VERTICAL CLEARANCE SECTION 308—REACH RANGES
212	FIGURE 308.2.1 UNOBSTRUCTED FORWARD REACH FIGURE 308.2.2 OBSTRUCTED HIGH FORWARD REACH
213	FIGURE 308.3.1 UNOBSTRUCTED SIDE REACH FIGURE 308.3.2(A) OBSTRUCTED HIGH SIDE REACH
214	FIGURE 308.3.2(B) OBSTRUCTED HIGH SIDE REACH SECTION 309—OPERABLE PARTS
215	FIGURE 309.1 OPERABLE PARTS – EXCEPTION 3
216	CHAPTER 6: PLUMBING ELEMENTS AND FACILITIES SECTION 601—GENERAL SECTION 602—DRINKING FOUNTAINS AND BOTTLE FILLING STATIONS FIGURE 602.2.1(A) CLEAR FLOOR SPACE AT WHEELCHAIR DRINKING FOUNTAINS FIGURE 602.2.1(B) CLEAR FLOOR SPACE AT WHEELCHAIR DRINKING FOUNTAINS -PRIMARILY FOR CHILDREN’S USE – EXCEPTION
217	FIGURE 602.2.3 WHEELCHAIR DRINKING FOUNTAIN SPOUT HEIGHT AND LOCATION FIGURE 602.2.4 WHEELCHAIR DRINKING FOUNTAIN SPOUT LOCATION
218	FIGURE 602.3.2 STANDING USE DRINKING FOUNTAIN SPOUT HEIGHT AND LOCATION FIGURE 602.3.3 STANDING USE DRINKING FOUNTAIN SPOUT LOCATION SECTION 603—TOILET AND BATHING ROOMS
219	TABLE 603.6 MAXIMUM REACH DEPTH AND HEIGHT SECTION 604—WATER CLOSETS AND TOILET COMPARTMENTS
220	FIGURE 604.2 WATER CLOSET LOCATION FIGURE 604.3 SIZE OF CLEARANCE FOR WATER CLOSET
221	FIGURE 604.4 WATER CLOSET SEAT HEIGHT
222	FIGURE 604.5.1 SIDE-WALL GRAB BAR FOR WATER CLOSET
223	FIGURE 604.5.2 REAR-WALL GRAB BAR FOR WATER CLOSET FIGURE 604.7.1(A) DISPENSER OUTLET LOCATION – PROTRUDING DISPENSER BELOW GRAB BAR FIGURE 604.7.1(B) DISPENSER OUTLET LOCATION – PROTRUDING DISPENSER ABOVEGRAB BAR
224	FIGURE 604.7.1(C) DISPENSER OUTLET LOCATION – RECESSED DISPENSER FIGURE 604.7.1(D) DISPENSER OUTLET LOCATION – DISPENSER IN FRONT OF WATERCLOSET – EXCEPTION FIGURE 604.9.2(A) WHEELCHAIR TOILET COMPARTMENTS – WALL HUNG CLOSET, ADULT FIGURE 604.9.2(B) WHEELCHAIR TOILET COMPARTMENTS – FLOOR MOUNTED WATER CLOSET, ADULT – WALL HUNG AND FLOOR MOUNTED WATER CLOSET, CHILDREN
225	FIGURE 604.9.2.3 WHEELCHAIR TOILET COMPARTMENTS – ALTERNATE WHEELCHAIR TOILET COMPARTMENT
226	FIGURE 604.9.3(A) WHEELCHAIR TOILET COMPARTMENT DOORS – DOOR SWINGING INTO THE WHEELCHAIR TOILET COMPARTMENT FIGURE 604.9.3(B) WHEELCHAIR TOILET COMPARTMENT DOORS – EXCEPTION 3 – ALTERNATE WHEELCHAIR COMPARTMENT
227	TABLE 604.9.3.1—DOOR OPENING LOCATION FIGURE 604.9.3.1(A) WHEELCHAIR TOILET COMPARTMENT DOOR OPENING LOCATION – DOOR SWINGING IN ON FRONT WALL OF PARTITION FIGURE 604.9.3.1(B) WHEELCHAIR TOILET COMPARTMENT DOOR OPENING LOCATION – DOOR SWINGING IN ON SIDE WALL OF PARTITIONS
228	FIGURE 604.9.5(A) TOE CLEARANCE – ELEVATION FIGURE 604.9.5(B) TOE CLEARANCE – PLAN
229	FIGURE 604.10.1 AMBULATORY COMPARTMENT
230	FIGURE 604.11.2 CHILDREN’S WATER CLOSET LOCATION FIGURE 604.11.4 CHILDREN’S WATER CLOSET HEIGHT
231	FIGURE 604.11.7(A) CHILDREN’S DISPENSER OUTLET – LOCATION FIGURE 604.11.7(B) CHILDREN’S DISPENSER OUTLET – EXCEPTION SECTION 605—URINALS FIGURE 605.2(A) HEIGHT AND DEPTH OF URINAL – WALL HUNG TYPE FIGURE 605.2(B) HEIGHT AND DEPTH OF URINAL – STALL TYPE
232	SECTION 606—LAVATORIES AND SINKS FIGURE 606.3 HEIGHT OF LAVATORIES AND SINKS
233	SECTION 607—BATHTUBS FIGURE 607.2(A) CLEARANCE FOR BATHTUBS WITH REMOVABLE IN TUB SEATS FIGURE 607.2(B) CLEARANCE FOR BATHTUBS WITH SEAT AT HEAD END OF TUB FIGURE 607.4.1(A) GRAB BARS FOR BATHTUBS WITH SEAT AT HEAD END OF TUB – ELEVATION
234	FIGURE 607.4.1(B) GRAB BARS FOR BATHTUBS WITH SEAT AT HEAD END OF TUB – PLAN FIGURE 607.4.2(A) GRAB BARS FOR BATHTUBS WITH REMOVABLE SEATS – ELEVATION
235	FIGURE 607.4.2(B) GRAB BARS FOR BATHTUBS WITH REMOVABLE SEATS – PLAN FIGURE 607.5 LOCATION OF BATHTUB CONTROLS SECTION 608—SHOWER COMPARTMENTS
236	FIGURE 608.2.1.1 TRANSFER-TYPE SHOWER COMPARTMENT SIZE FIGURE 608.2.1.2(A) TRANSFER-TYPE SHOWER COMPARTMENT CLEARANCES – NEW BUILDINGS – OPTION 1
237	FIGURE 608.2.1.2(B) TRANSFER-TYPE SHOWER COMPARTMENT CLEARANCES – NEW BUILDINGS – OPTION 2 FIGURE 608.2.1.2(C) TRANSFER-TYPE SHOWER COMPARTMENT CLEARANCES – EXISTING BUILDINGS
238	FIGURE 608.2.2.1 STANDARD ROLL-IN-TYPE SHOWER COMPARTMENT SIZE FIGURE 608.2.2.2 STANDARD ROLL-IN-TYPE SHOWER COMPARTMENT CLEARANCE
239	FIGURE 608.2.3.1 ALTERNATE ROLL-IN-TYPE SHOWER COMPARTMENT SIZE FIGURE 608.3.1(A) GRAB BARS IN TRANSFER-TYPE SHOWER – ELEVATION FIGURE 608.3.1(B) GRAB BARS IN TRANSFER-TYPE SHOWER – PLAN
240	FIGURE 608.3.2(A) GRAB BARS IN STANDARD ROLL-IN-TYPE SHOWER – ELEVATION FIGURE 608.3.2(B) GRAB BARS IN STANDARD ROLL-IN-TYPE SHOWER – PLAN
241	FIGURE 608.3.3(A) GRAB BARS IN ALTERNATE ROLL-IN-TYPE SHOWER – ELEVATION FIGURE 608.3.3(B) GRAB BARS IN ALTERNATE ROLL-IN-TYPE SHOWER – PLAN FIGURE 608.4.1 TRANSFER-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION
242	FIGURE 608.4.2 STANDARD ROLL-IN-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION FIGURE 608.4.3(A) ALTERNATE ROLL-IN-TYPE SHOWER CONTROLS AND HANDSHOWER LOCATION – CONTROL WALL – ELEVATION FIGURE 608.4.3(B) ALTERNATE ROLL-IN-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION – BACK WALL – ELEVATION
243	SECTION 609—GRAB BARS FIGURE 609.2 SIZE OF GRAB BARS FIGURE 609.3 SPACING OF GRAB BARS
244	FIGURE 609.4.2(A) POSITIONS OF CHILDREN’S GRAB BARS – SIDE-WALL VIEW FIGURE 609.4.2(B) POSITIONS OF CHILDREN’S GRAB BARS – REAR-WALL VIEW SECTION 610—SEATS
245	FIGURE 610.2(A) BATHTUB SEATS – REMOVABLE IN-TUB SEATS FIGURE 610.2(B) BATHTUB SEATS – SEAT PROVIDED AT HEAD END OF TUB FIGURE 610.3.1 RECTANGULAR SHOWER COMPARTMENT SEATS
246	FIGURE 610.3.2 L-SHAPED SHOWER COMPARTMENT SEATS SECTION 611 WASHING MACHINES AND CLOTHES DRYERS FIGURE 611.2(A) CLEAR FLOOR SPACE – TOP LOADING FIGURE 611.2(B) CLEAR FLOOR SPACE – FRONT LOADING
247	FIGURE 611.4(A) HEIGHT OF LAUNDRY EQUIPMENT – TOP LOADING FIGURE 611.4(B) HEIGHT OF LAUNDRY EQUIPMENT – FRONT LOADING SECTION 612 SAUNAS AND STEAM ROOMS
248	CHAPTER 8: SPECIAL ROOMS AND SPACES SECTION 801—GENERAL SECTION 804—KITCHENS FIGURE 804.2.1(A) PASS-THROUGH KITCHEN CLEARANCE FIGURE 804.2.1(B) PASS-THROUGH KITCHEN CLEARANCE
249	FIGURE 804.2.2(A) U-SHAPED KITCHEN CLEARANCE FIGURE 804.2.2(B) U-SHAPED KITCHEN CLEARANCE FIGURE 804.2.2(C) U-SHAPED KITCHEN CLEARANCE – EXCEPTION
251	CHAPTER 11: DWELLING UNITS AND SLEEPING UNITS SECTION 1101—GENERAL SECTION 1102—ACCESSIBLE UNITS
252	SECTION 1103—TYPE A UNITS
253	FIGURE 1103.11.2.4(A) WATER CLOSETS IN TYPE A UNITS – WATER CLOSET LOCATION FIGURE 1103.11.2.4(B) WATER CLOSETS IN TYPE A UNITS – MINIMUM CLEARANCE
254	FIGURE 1103.11.2.4(C) WATER CLOSETS IN TYPE A UNITS – CLEARANCE WITH LAVATORY (OVERLAP EXCEPTION) FIGURE 1103.11.2.4(D) WATER CLOSETS IN TYPE A UNITS – WATER CLOSET SEAT HEIGHT
255	FIGURE 1103.11.2.5.1(A) CLEARANCE FOR BATHTUBS IN TYPE A UNITS WITH REMOVABLE SEAT FIGURE 1103.11.2.5.1(B) CLEARANCE FOR BATHTUBS IN TYPE A UNITS WITH PERMANENT SEAT FIGURE 1103.11.2.5.2 STANDARD ROLL-IN-TYPE SHOWER COMPARTMENT IN TYPE A UNITS
256	FIGURE 1103.12.1.1 MINIMUM KITCHEN CLEARANCE IN TYPE A UNITS
257	FIGURE 1103.12.1.2(A) U-SHAPED KITCHEN CLEARANCE IN TYPE A UNITS FIGURE 1103.12.1.2(B) U-SHAPED KITCHEN CLEARANCE IN TYPE A UNITS EXCEPTION FIGURE 1103.12.3 WORK SURFACE IN KITCHEN FOR TYPE A UNITS
259	SECTION 1104—TYPE B UNITS FIGURE 1104.1.1 CLEAR FLOOR SPACE FOR TYPE B UNITS
261	FIGURE 1104.9 REACH OVER A KITCHEN OR BATHROOM CABINET
262	FIGURE 1104.11.1.1 SWING-UP GRAB BARS FOR WATER CLOSETS
263	FIGURE 1104.11.3.1.1 LAVATORY IN TYPE B UNITS – OPTION A BATHROOMS FIGURE 1104.11.3.1.2(A) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS WATER CLOSET LOCATION FIGURE 1104.11.3.1.2(B) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS CLEARANCE WIDTH AND DEPTH
264	FIGURE 1104.11.3.1.2(C) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS INCREASED CLEARANCE DEPTH – FORWARD APPROACH FIGURE 1104.11.3.1.2(D) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS CLEARANCE WITH LAVATORY OVERLAP
265	FIGURE 1104.11.3.1.3.1 PARALLEL APPROACH BATHTUB IN TYPE B UNITS – OPTION A BATHROOM
266	FIGURE 1104.11.3.1.3.2 FORWARD APPROACH BATHTUB IN TYPE B UNITS – OPTION A BATHROOM FIGURE 1104.11.3.1.3.3(A) TRANSFER-TYPE SHOWER COMPARTMENT IN TYPE B UNITS FIGURE 1104.11.3.1.3.3(B) TRANSFER-TYPE SHOWER COMPARTMENT IN TYPE B UNITS EXCEPTION
267	FIGURE 1104.11.3.2.1 LAVATORY IN TYPE B UNITS – OPTION B BATHROOM FIGURE 1104.11.3.2.3.1 BATHROOM CLEARANCE IN TYPE B UNITS – OPTION B BATHROOM
268	FIGURE 1104.12.1.1 MINIMUM CLEARANCE IN TYPE B UNITS FIGURE 1104.12.1.2(A) U-SHAPED KITCHEN CLEARANCE IN TYPE B UNITS
269	FIGURE 1104.12.1.2(B) U-SHAPED KITCHEN CLEARANCE IN TYPE B UNITS – EXCEPTION SECTION 1105—TYPE C (VISITABLE) UNITS
270	SECTION 1106—UNITS WITH COMMUNICATION FEATURES
272	ICC EVALUATION SERVICE®
273	ICC CREDENTIALING
274	CHANGES TO THE CODE DEVELOPMENT PROCESS
275	ICC DIGITAL CODES PREMIUM®