Shopping Cart

No products in the cart.

IMC 09 2009

$43.60

International Mechanical Code

Published By Publication Date Number of Pages
ICC 2009 149
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions.

PDF Catalog

PDF Pages PDF Title
1 2009 IMC® INTERNATIONAL MECHANICAL CODE®
2009 IMC® INTERNATIONAL MECHANICAL CODE®
2 IMC® INTERNATIONAL MECHANICAL CODE® 2009 TITLE PAGE
IMC® INTERNATIONAL MECHANICAL CODE® 2009 TITLE PAGE
3 COPYRIGHT
COPYRIGHT
4 PREFACE
PREFACE
6 EFFECTIVE USE OF THE INTERNATIONAL MECHANICAL CODE
EFFECTIVE USE OF THE INTERNATIONAL MECHANICAL CODE
10 ORDINANCE
ORDINANCE
12 TABLE OF CONTENTS
TABLE OF CONTENTS
16 CHAPTER 1 SCOPE AND ADMINISTRATION
CHAPTER 1 SCOPE AND ADMINISTRATION
PART 1 SCOPE AND APPLICATION
PART 1 SCOPE AND APPLICATION
SECTION 101 GENERAL
SECTION 101 GENERAL
SECTION 102 APPLICABILITY
SECTION 102 APPLICABILITY
17 PART 2 ADMINISTRATION AND ENFORCEMENT
PART 2 ADMINISTRATION AND ENFORCEMENT
SECTION 103 DEPARTMENT OF MECHANICAL INSPECTION
SECTION 103 DEPARTMENT OF MECHANICAL INSPECTION
SECTION 104 DUTIES AND POWERS OF THE CODE OFFICIAL
SECTION 104 DUTIES AND POWERS OF THE CODE OFFICIAL
SECTION 105 APPROVAL
SECTION 105 APPROVAL
18 SECTION 106 PERMITS
SECTION 106 PERMITS
20 SECTION 107 INSPECTIONS AND TESTING
SECTION 107 INSPECTIONS AND TESTING
21 SECTION 108 VIOLATIONS
SECTION 108 VIOLATIONS
22 SECTION 109 MEANS OF APPEAL
SECTION 109 MEANS OF APPEAL
23 SECTION 110 TEMPORARY EQUIPMENT, SYSTEMS AND USES
SECTION 110 TEMPORARY EQUIPMENT, SYSTEMS AND USES
24 CHAPTER 2 DEFINITIONS
CHAPTER 2 DEFINITIONS
SECTION 201 GENERAL
SECTION 201 GENERAL
SECTION 202 GENERAL DEFINITIONS
SECTION 202 GENERAL DEFINITIONS
34 CHAPTER 3 GENERAL REGULATIONS
CHAPTER 3 GENERAL REGULATIONS
SECTION 301 GENERAL
SECTION 301 GENERAL
35 SECTION 302 PROTECTION OF STRUCTURE
SECTION 302 PROTECTION OF STRUCTURE
36 SECTION 303 EQUIPMENT AND APPLIANCE LOCATION
SECTION 303 EQUIPMENT AND APPLIANCE LOCATION
SECTION 304 INSTALLATION
SECTION 304 INSTALLATION
37 SECTION 305 PIPING SUPPORT
SECTION 305 PIPING SUPPORT
38 TABLE 305.4 PIPING SUPPORT SPACINGa
TABLE 305.4 PIPING SUPPORT SPACINGa
SECTION 306 ACCESS AND SERVICE SPACE
SECTION 306 ACCESS AND SERVICE SPACE
39 SECTION 307 CONDENSATE DISPOSAL
SECTION 307 CONDENSATE DISPOSAL
40 TABLE 307.2.2 CONDENSATE DRAIN SIZING
TABLE 307.2.2 CONDENSATE DRAIN SIZING
SECTION 308 CLEARANCE REDUCTION
SECTION 308 CLEARANCE REDUCTION
41 TABLE 308.6 CLEARANCE REDUCTION METHODSb
TABLE 308.6 CLEARANCE REDUCTION METHODSb
42 SECTION 309 TEMPERATURE CONTROL
SECTION 309 TEMPERATURE CONTROL
SECTION 310 EXPLOSION CONTROL
SECTION 310 EXPLOSION CONTROL
SECTION 311 SMOKE AND HEAT VENTS
SECTION 311 SMOKE AND HEAT VENTS
SECTION 312 HEATING AND COOLING LOAD CALCULATIONS
SECTION 312 HEATING AND COOLING LOAD CALCULATIONS
44 CHAPTER 4 VENTILATION
CHAPTER 4 VENTILATION
SECTION 401 GENERAL
SECTION 401 GENERAL
TABLE 401.5 OPENING SIZES IN LOUVERS, GRILLES ANDSCREENS PROTECTING AIR INTAKE OPENINGS
TABLE 401.5 OPENING SIZES IN LOUVERS, GRILLES ANDSCREENS PROTECTING AIR INTAKE OPENINGS
SECTION 402 NATURAL VENTILATION
SECTION 402 NATURAL VENTILATION
45 SECTION 403 MECHANICAL VENTILATION
SECTION 403 MECHANICAL VENTILATION
EQUATION 4-1
EQUATION 4-1
46 TABLE 403.3 MINIMUM VENTILATION RATES
TABLE 403.3 MINIMUM VENTILATION RATES
47 TABLE 403.3—continued MINIMUM VENTILATION RATES
TABLE 403.3—continued MINIMUM VENTILATION RATES
48 TABLE 403.3—continued MINIMUM VENTILATION RATES
TABLE 403.3—continued MINIMUM VENTILATION RATES
49 TABLE 403.3.1.2 ZONE AIR DISTRIBUTION EFFECTIVENESSa
TABLE 403.3.1.2 ZONE AIR DISTRIBUTION EFFECTIVENESSa
EQUATION 4-2
EQUATION 4-2
EQUATION 4-3
EQUATION 4-3
EQUATION 4-4
EQUATION 4-4
EQUATION 4-5
EQUATION 4-5
TABLE 403.3.2.3.2 SYSTEM VENTILATION EFFICIENCYa
TABLE 403.3.2.3.2 SYSTEM VENTILATION EFFICIENCYa
EQUATION 4-6
EQUATION 4-6
EQUATION 4-7
EQUATION 4-7
50 EQUATION 4-8
EQUATION 4-8
SECTION 404 ENCLOSED PARKING GARAGES
SECTION 404 ENCLOSED PARKING GARAGES
SECTION 405 SYSTEMS CONTROL
SECTION 405 SYSTEMS CONTROL
SECTION 406 VENTILATION OF UNINHABITED SPACES
SECTION 406 VENTILATION OF UNINHABITED SPACES
52 CHAPTER 5 EXHAUST SYSTEMS
CHAPTER 5 EXHAUST SYSTEMS
SECTION 501 GENERAL
SECTION 501 GENERAL
SECTION 502 REQUIRED SYSTEMS
SECTION 502 REQUIRED SYSTEMS
53 EQUATION 5-1
EQUATION 5-1
59 SECTION 503 MOTORS AND FANS
SECTION 503 MOTORS AND FANS
SECTION 504 CLOTHES DRYER EXHAUST
SECTION 504 CLOTHES DRYER EXHAUST
60 TABLE 504.6.4.1 DRYER EXHAUST DUCT FITTING EQUIVALENT LENGTH
TABLE 504.6.4.1 DRYER EXHAUST DUCT FITTING EQUIVALENT LENGTH
61 SECTION 505 DOMESTIC KITCHEN EXHAUST EQUIPMENT
SECTION 505 DOMESTIC KITCHEN EXHAUST EQUIPMENT
SECTION 506 COMMERCIAL KITCHEN HOOD VENTILATIONSYSTEM DUCTS AND EXHAUST EQUIPMENT
SECTION 506 COMMERCIAL KITCHEN HOOD VENTILATIONSYSTEM DUCTS AND EXHAUST EQUIPMENT
65 SECTION 507 COMMERCIAL KITCHEN HOODS
SECTION 507 COMMERCIAL KITCHEN HOODS
66 TABLE 507.11 MINIMUM DISTANCE BETWEEN THE LOWEST EDGE OF A GREASE FILTER AND THE COOKING SURFACE OR THE HEATING SURFACE
TABLE 507.11 MINIMUM DISTANCE BETWEEN THE LOWEST EDGE OF A GREASE FILTER AND THE COOKING SURFACE OR THE HEATING SURFACE
67 SECTION 508 COMMERCIAL KITCHEN MAKEUP AIR
SECTION 508 COMMERCIAL KITCHEN MAKEUP AIR
SECTION 509 FIRE SUPPRESSION SYSTEMS
SECTION 509 FIRE SUPPRESSION SYSTEMS
SECTION 510 HAZARDOUS EXHAUST SYSTEMS
SECTION 510 HAZARDOUS EXHAUST SYSTEMS
69 TABLE 510.8 MINIMUM DUCT THICKNESS
TABLE 510.8 MINIMUM DUCT THICKNESS
TABLE 510.8.2 CLEARANCE TO COMBUSTIBLES
TABLE 510.8.2 CLEARANCE TO COMBUSTIBLES
SECTION 511 DUST, STOCK AND REFUSE CONVEYING SYSTEMS
SECTION 511 DUST, STOCK AND REFUSE CONVEYING SYSTEMS
70 TABLE 511.2 CONSTRUCTION, CLEARANCE AND TERMINATION REQUIREMENTS FOR SINGLE-WALL METAL CHIMNEYS
TABLE 511.2 CONSTRUCTION, CLEARANCE AND TERMINATION REQUIREMENTS FOR SINGLE-WALL METAL CHIMNEYS
SECTION 512 SUBSLAB SOIL EXHAUST SYSTEMS
SECTION 512 SUBSLAB SOIL EXHAUST SYSTEMS
71 SECTION 513 SMOKE CONTROL SYSTEMS
SECTION 513 SMOKE CONTROL SYSTEMS
72 EQUATION 5-2
EQUATION 5-2
EQUATION 5-3
EQUATION 5-3
73 EQUATION 5-4
EQUATION 5-4
74 SECTION 514 ENERGY RECOVERY VENTILATION SYSTEMS
SECTION 514 ENERGY RECOVERY VENTILATION SYSTEMS
76 CHAPTER 6 DUCT SYSTEMS
CHAPTER 6 DUCT SYSTEMS
SECTION 601 GENERAL
SECTION 601 GENERAL
SECTION 602 PLENUMS
SECTION 602 PLENUMS
78 SECTION 603 DUCT CONSTRUCTION AND INSTALLATION
SECTION 603 DUCT CONSTRUCTION AND INSTALLATION
TABLE 603.4 DUCT CONSTRUCTION MINIMUM SHEET METAL THICKNESSES FOR SINGLE DWELLING UNITS
TABLE 603.4 DUCT CONSTRUCTION MINIMUM SHEET METAL THICKNESSES FOR SINGLE DWELLING UNITS
79 SECTION 604 INSULATION
SECTION 604 INSULATION
80 SECTION 605 AIR FILTERS
SECTION 605 AIR FILTERS
SECTION 606 SMOKE DETECTION SYSTEMS CONTROL
SECTION 606 SMOKE DETECTION SYSTEMS CONTROL
81 SECTION 607 DUCT AND TRANSFER OPENINGS
SECTION 607 DUCT AND TRANSFER OPENINGS
82 TABLE 607.3.2.1 FIRE DAMPER RATING
TABLE 607.3.2.1 FIRE DAMPER RATING
86 CHAPTER 7 COMBUSTION AIR
CHAPTER 7 COMBUSTION AIR
SECTION 701 GENERAL
SECTION 701 GENERAL
88 CHAPTER 8 CHIMNEYS AND VENTS
CHAPTER 8 CHIMNEYS AND VENTS
SECTION 801 GENERAL
SECTION 801 GENERAL
89 SECTION 802 VENTS
SECTION 802 VENTS
TABLE 802.2 VENT APPLICATION
TABLE 802.2 VENT APPLICATION
90 SECTION 803 CONNECTORS
SECTION 803 CONNECTORS
TABLE 803.9(1) MINIMUM CHIMNEY CONNECTOR THICKNESS FOR LOW-HEAT APPLIANCES
TABLE 803.9(1) MINIMUM CHIMNEY CONNECTOR THICKNESS FOR LOW-HEAT APPLIANCES
TABLE 803.9(2) MINIMUM CHIMNEY CONNECTOR THICKNESS FOR MEDIUM- AND HIGH-HEAT APPLIANCES
TABLE 803.9(2) MINIMUM CHIMNEY CONNECTOR THICKNESS FOR MEDIUM- AND HIGH-HEAT APPLIANCES
91 TABLE 803.10.4 CHIMNEY CONNECTOR SYSTEMS AND CLEARANCES TO COMBUSTIBLE WALL MATERIALS FOR DOMESTIC HEATING APPLIANCESa, b, c, d
TABLE 803.10.4 CHIMNEY CONNECTOR SYSTEMS AND CLEARANCES TO COMBUSTIBLE WALL MATERIALS FOR DOMESTIC HEATING APPLIANCESa, b, c, d
TABLE 803.10.6 CONNECTOR CLEARANCES TO COMBUSTIBLES
TABLE 803.10.6 CONNECTOR CLEARANCES TO COMBUSTIBLES
SECTION 804 DIRECT-VENT, INTEGRAL VENT ANDMECHANICAL DRAFT SYSTEMS
SECTION 804 DIRECT-VENT, INTEGRAL VENT ANDMECHANICAL DRAFT SYSTEMS
92 SECTION 805 FACTORY-BUILT CHIMNEYS
SECTION 805 FACTORY-BUILT CHIMNEYS
93 SECTION 806 METAL CHIMNEYS
SECTION 806 METAL CHIMNEYS
94 CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES ANDSOLID FUEL-BURNING EQUIPMENT
CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES ANDSOLID FUEL-BURNING EQUIPMENT
SECTION 901 GENERAL
SECTION 901 GENERAL
SECTION 902 MASONRY FIREPLACES
SECTION 902 MASONRY FIREPLACES
SECTION 903 FACTORY-BUILT FIREPLACES
SECTION 903 FACTORY-BUILT FIREPLACES
SECTION 904 PELLET FUEL-BURNING APPLIANCES
SECTION 904 PELLET FUEL-BURNING APPLIANCES
SECTION 905 FIREPLACE STOVES AND ROOM HEATERS
SECTION 905 FIREPLACE STOVES AND ROOM HEATERS
SECTION 906 FACTORY-BUILT BARBECUE APPLIANCES
SECTION 906 FACTORY-BUILT BARBECUE APPLIANCES
SECTION 907 INCINERATORS AND CREMATORIES
SECTION 907 INCINERATORS AND CREMATORIES
SECTION 908 COOLING TOWERS, EVAPORATIVE CONDENSERS AND FLUID COOLERS
SECTION 908 COOLING TOWERS, EVAPORATIVE CONDENSERS AND FLUID COOLERS
95 SECTION 909 VENTED WALL FURNACES
SECTION 909 VENTED WALL FURNACES
SECTION 910 FLOOR FURNACES
SECTION 910 FLOOR FURNACES
SECTION 911 DUCT FURNACES
SECTION 911 DUCT FURNACES
SECTION 912 INFRARED RADIANT HEATERS
SECTION 912 INFRARED RADIANT HEATERS
SECTION 913 CLOTHES DRYERS
SECTION 913 CLOTHES DRYERS
96 SECTION 914 SAUNA HEATERS
SECTION 914 SAUNA HEATERS
SECTION 915 ENGINE AND GAS TURBINE-POWERED EQUIPMENT AND APPLIANCES
SECTION 915 ENGINE AND GAS TURBINE-POWERED EQUIPMENT AND APPLIANCES
SECTION 916 POOL AND SPA HEATERS
SECTION 916 POOL AND SPA HEATERS
SECTION 917 COOKING APPLIANCES
SECTION 917 COOKING APPLIANCES
SECTION 918 FORCED-AIR WARM-AIR FURNACES
SECTION 918 FORCED-AIR WARM-AIR FURNACES
97 SECTION 919 CONVERSION BURNERS
SECTION 919 CONVERSION BURNERS
SECTION 920 UNIT HEATERS
SECTION 920 UNIT HEATERS
98 SECTION 921 VENTED ROOM HEATERS
SECTION 921 VENTED ROOM HEATERS
SECTION 922 KEROSENE AND OIL-FIRED STOVES
SECTION 922 KEROSENE AND OIL-FIRED STOVES
SECTION 923 SMALL CERAMIC KILNS
SECTION 923 SMALL CERAMIC KILNS
SECTION 924 STATIONARY FUEL CELL POWER SYSTEMS
SECTION 924 STATIONARY FUEL CELL POWER SYSTEMS
SECTION 925 MASONRY HEATERS
SECTION 925 MASONRY HEATERS
SECTION 926 GASEOUS HYDROGEN SYSTEMS
SECTION 926 GASEOUS HYDROGEN SYSTEMS
SECTION 927 HEAT RECOVERY VENTILATORS
SECTION 927 HEAT RECOVERY VENTILATORS
100 CHAPTER 10 BOILERS,WATER HEATERS AND PRESSURE VESSELS
CHAPTER 10 BOILERS,WATER HEATERS AND PRESSURE VESSELS
SECTION 1001 GENERAL
SECTION 1001 GENERAL
SECTION 1002 WATER HEATERS
SECTION 1002 WATER HEATERS
SECTION 1003 PRESSURE VESSELS
SECTION 1003 PRESSURE VESSELS
SECTION 1004 BOILERS
SECTION 1004 BOILERS
101 SECTION 1005 BOILER CONNECTIONS
SECTION 1005 BOILER CONNECTIONS
SECTION 1006 SAFETY AND PRESSURE RELIEF VALVES AND CONTROLS
SECTION 1006 SAFETY AND PRESSURE RELIEF VALVES AND CONTROLS
SECTION 1007 BOILER LOW-WATER CUTOFF
SECTION 1007 BOILER LOW-WATER CUTOFF
102 SECTION 1008 STEAM BLOWOFF VALVE
SECTION 1008 STEAM BLOWOFF VALVE
SECTION 1009 HOT WATER BOILER EXPANSION TANK
SECTION 1009 HOT WATER BOILER EXPANSION TANK
EQUATION 10-1
EQUATION 10-1
SECTION 1010 GAUGES
SECTION 1010 GAUGES
SECTION 1011 TESTS
SECTION 1011 TESTS
104 CHAPTER 11 REFRIGERATION
CHAPTER 11 REFRIGERATION
SECTION 1101 GENERAL
SECTION 1101 GENERAL
SECTION 1102 SYSTEM REQUIREMENTS
SECTION 1102 SYSTEM REQUIREMENTS
105 SECTION 1103 REFRIGERATION SYSTEM CLASSIFICATION
SECTION 1103 REFRIGERATION SYSTEM CLASSIFICATION
SECTION 1104 SYSTEM APPLICATION REQUIREMENTS
SECTION 1104 SYSTEM APPLICATION REQUIREMENTS
106 TABLE 1103.1 REFRIGERANT CLASSIFICATION, AMOUNT AND OEL
TABLE 1103.1 REFRIGERANT CLASSIFICATION, AMOUNT AND OEL
107 TABLE 1103.1 REFRIGERANT CLASSIFICATION, AMOUNT AND OEL
TABLE 1103.1 REFRIGERANT CLASSIFICATION, AMOUNT AND OEL
108 TABLE 1103.1—continued REFRIGERANT CLASSIFICATION, AMOUNT AND OEL
TABLE 1103.1—continued REFRIGERANT CLASSIFICATION, AMOUNT AND OEL
109 TABLE 1103.1—continued REFRIGERANT CLASSIFICATION, AMOUNT AND OEL
TABLE 1103.1—continued REFRIGERANT CLASSIFICATION, AMOUNT AND OEL
110 TABLE 1104.3.2 MAXIMUM PERMISSIBLE QUANTITIES OF REFRIGERANTS
TABLE 1104.3.2 MAXIMUM PERMISSIBLE QUANTITIES OF REFRIGERANTS
111 SECTION 1105 MACHINERY ROOM, GENERAL REQUIREMENTS
SECTION 1105 MACHINERY ROOM, GENERAL REQUIREMENTS
EQUATION 11-1
EQUATION 11-1
112 EQUATION 11-2
EQUATION 11-2
SECTION 1106 MACHINERY ROOM, SPECIAL REQUIREMENTS
SECTION 1106 MACHINERY ROOM, SPECIAL REQUIREMENTS
SECTION 1107 REFRIGERANT PIPING
SECTION 1107 REFRIGERANT PIPING
114 SECTION 1108 FIELD TEST
SECTION 1108 FIELD TEST
SECTION 1109 PERIODIC TESTING
SECTION 1109 PERIODIC TESTING
116 CHAPTER 12 HYDRONIC PIPING
CHAPTER 12 HYDRONIC PIPING
SECTION 1201 GENERAL
SECTION 1201 GENERAL
SECTION 1202 MATERIAL
SECTION 1202 MATERIAL
TABLE 1202.4 HYDRONIC PIPE
TABLE 1202.4 HYDRONIC PIPE
TABLE 1202.4—continued HYDRONIC PIPE
TABLE 1202.4—continued HYDRONIC PIPE
TABLE 1202.5 HYDRONIC PIPE FITTINGS
TABLE 1202.5 HYDRONIC PIPE FITTINGS
117 SECTION 1203 JOINTS AND CONNECTIONS
SECTION 1203 JOINTS AND CONNECTIONS
118 SECTION 1204 PIPE INSULATION
SECTION 1204 PIPE INSULATION
119 SECTION 1205 VALVES
SECTION 1205 VALVES
SECTION 1206 PIPING INSTALLATION
SECTION 1206 PIPING INSTALLATION
SECTION 1207 TRANSFER FLUID
SECTION 1207 TRANSFER FLUID
SECTION 1208 TESTS
SECTION 1208 TESTS
120 SECTION 1209 EMBEDDED PIPING
SECTION 1209 EMBEDDED PIPING
122 CHAPTER 13 FUEL OIL PIPING AND STORAGE
CHAPTER 13 FUEL OIL PIPING AND STORAGE
SECTION 1301 GENERAL
SECTION 1301 GENERAL
SECTION 1302 MATERIAL
SECTION 1302 MATERIAL
TABLE 1302.3 FUEL OIL PIPING
TABLE 1302.3 FUEL OIL PIPING
SECTION 1303 JOINTS AND CONNECTIONS
SECTION 1303 JOINTS AND CONNECTIONS
123 SECTION 1304 PIPING SUPPORT
SECTION 1304 PIPING SUPPORT
SECTION 1305 FUEL OIL SYSTEM INSTALLATION
SECTION 1305 FUEL OIL SYSTEM INSTALLATION
124 SECTION 1306 OIL GAUGING
SECTION 1306 OIL GAUGING
SECTION 1307 FUEL OIL VALVES
SECTION 1307 FUEL OIL VALVES
SECTION 1308 TESTING
SECTION 1308 TESTING
126 CHAPTER 14 SOLAR SYSTEMS
CHAPTER 14 SOLAR SYSTEMS
SECTION 1401 GENERAL
SECTION 1401 GENERAL
SECTION 1402 INSTALLATION
SECTION 1402 INSTALLATION
127 SECTION 1403 HEAT TRANSFER FLUIDS
SECTION 1403 HEAT TRANSFER FLUIDS
SECTION 1404 MATERIALS
SECTION 1404 MATERIALS
128 CHAPTER 15 REFERENCED STANDARDS
CHAPTER 15 REFERENCED STANDARDS
ACCA
ACCA
AHRI
AHRI
ANSI
ANSI
ASHRAE
ASHRAE
ASME
ASME
129 ASSE
ASSE
ASTM
ASTM
130 AWS
AWS
131 AWWA
AWWA
CSA
CSA
DOL
DOL
FS
FS
ICC
ICC
132 IIAR
IIAR
MSS
MSS
NAIMA
NAIMA
NFPA
NFPA
133 SMACNA
SMACNA
UL
UL
136 APPENDIX A COMBUSTION AIR OPENINGS AND CHIMNEY CONNECTOR PASS-THROUGHS
APPENDIX A COMBUSTION AIR OPENINGS AND CHIMNEY CONNECTOR PASS-THROUGHS
FIGURE A-1 ALL AIR FROM INSIDE THE BUILDING
FIGURE A-1 ALL AIR FROM INSIDE THE BUILDING
FIGURE A-2 ALL AIR FROM OUTDOORS—INLET AIR FROM VENTILATED CRAWL SPACE AND OUTLET AIR TO VENTILATED ATTIC
FIGURE A-2 ALL AIR FROM OUTDOORS—INLET AIR FROM VENTILATED CRAWL SPACE AND OUTLET AIR TO VENTILATED ATTIC
137 FIGURE A-3 ALL AIR FROM OUTDOORS THROUGH VENTILATED ATTIC
FIGURE A-3 ALL AIR FROM OUTDOORS THROUGH VENTILATED ATTIC
FIGURE A-4 ALL AIR FROM OUTDOORS THROUGH HORIZONTAL DUCTS OR DIRECT OPENINGS
FIGURE A-4 ALL AIR FROM OUTDOORS THROUGH HORIZONTAL DUCTS OR DIRECT OPENINGS
138 FIGURE A-5 CHIMNEY CONNECTOR SYSTEMS
FIGURE A-5 CHIMNEY CONNECTOR SYSTEMS
139 FIGURE A-5—continued CHIMNEY CONNECTOR SYSTEMS
FIGURE A-5—continued CHIMNEY CONNECTOR SYSTEMS
140 APPENDIX B RECOMMENDED PERMIT FEE SCHEDULE
APPENDIX B RECOMMENDED PERMIT FEE SCHEDULE
142 INDEX
INDEX
146 ICC-ES PMG LISTING PROGRAM
ICC-ES PMG LISTING PROGRAM
147 ICC MEMBERSHIP INFORMATION
ICC MEMBERSHIP INFORMATION
148 ICC CODE TRAINING
ICC CODE TRAINING
149 2009 I-CODES SIGNIFICANT CHANGES SERIES
2009 I-CODES SIGNIFICANT CHANGES SERIES
WWW.ECODES.BIZ
WWW.ECODES.BIZ
IMC 09 2009
$43.60