A practical tool that helps you to master the code you deal with every day!

This bundle includes both volume 1 and volume 2 of the 2009 International Residential Code® Commentary.

This comprehensive publication provides a convenient reference for regulations of the 2009 International Residential Code® (IRC®). Presented in an easy-to-reference format the commentary includes the full text of the code, including tables and figures, followed by corresponding commentary at the end of each section in one document. Every chapter begins with “General Comments” and “Purpose” sections followed by code and commentary to subsequent sections, tables and figures.

This in-depth publication focuses on providing the full meaning and implications of the 2009 IRC®. The commentaries are designed to suggest the most effective method of application, and the consequences of not adhering to the code.

This is an excellent reference for code officials, engineers, architects, inspectors, plans examiners, contractors and anyone who needs a better understanding of the 2009 IRC®.

PDF Catalog

PDF Pages	PDF Title
1	2009 IRC® INTERNATIONAL RESIDENTIAL CODE® FOR ONE- AND TWO-FAMILY DWELLINGS CODE AND COMMENTARY VOLUME 1 TITLE PAGE 2009 IRC® INTERNATIONAL RESIDENTIAL CODE® FOR ONE- AND TWO-FAMILY DWELLINGS CODE AND COMMENTARY VOLUME 1 TITLE PAGE
2	COPYRIGHT COPYRIGHT
3	PREFACE PREFACE
5	TABLE OF CONTENTS TABLE OF CONTENTS
7	PART I – ADMINISTRATIVE PART I – ADMINISTRATIVE CHAPTER 1: SCOPE AND ADMINISTRATION CHAPTER 1: SCOPE AND ADMINISTRATION GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE PART I—SCOPE AND APPLICATION PART I—SCOPE AND APPLICATION SECTION R101 – GENERAL SECTION R101 – GENERAL
9	SECTION R102 – APPLICABILITY SECTION R102 – APPLICABILITY
11	PART II—ADMINISTRATION AND ENFORCEMENT PART II—ADMINISTRATION AND ENFORCEMENT SECTION R103 – DEPARTMENT OF BUILDING SAFETY SECTION R103 – DEPARTMENT OF BUILDING SAFETY SECTION R104 – DUTIES AND POWERS OF THE BUILDING OFFICIAL SECTION R104 – DUTIES AND POWERS OF THE BUILDING OFFICIAL
12	FIGURE R104.5 – PERSONNEL IDENTIFICATION BADGE FIGURE R104.5 – PERSONNEL IDENTIFICATION BADGE
14	SECTION R105 – PERMITS SECTION R105 – PERMITS
18	SECTION R106 – CONSTRUCTION DOCUMENTS SECTION R106 – CONSTRUCTION DOCUMENTS
21	SECTION R107 – TEMPORARY STRUCTURES AND USES SECTION R107 – TEMPORARY STRUCTURES AND USES SECTION R108 – FEES SECTION R108 – FEES
22	SECTION R109 – INSPECTIONS SECTION R109 – INSPECTIONS
24	SECTION R110 – CERTIFICATE OF OCCUPANCY SECTION R110 – CERTIFICATE OF OCCUPANCY
25	SECTION R111 – SERVICE UTILITIES SECTION R111 – SERVICE UTILITIES FIGURE R110.3 – CERTIFICATE OF OCCUPANCY FIGURE R110.3 – CERTIFICATE OF OCCUPANCY
26	SECTION R112 – BOARD OF APPEALS SECTION R112 – BOARD OF APPEALS
28	SECTION R113 – VIOLATIONS SECTION R113 – VIOLATIONS SECTION R114 – STOP WORK ORDER SECTION R114 – STOP WORK ORDER
29	FIGURE R114.1 – STOP WORK ORDER FIGURE R114.1 – STOP WORK ORDER BIBLIOGRAPHY BIBLIOGRAPHY
31	PART II – DEFINITIONS PART II – DEFINITIONS CHAPTER 2: DEFINITIONS CHAPTER 2: DEFINITIONS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION R201 – GENERAL SECTION R201 – GENERAL
32	SECTION R202 – DEFINITIONS SECTION R202 – DEFINITIONS FIGURE R202(1) AIR ADMITTANCE VALVE OPENS TO ADMIT AIR TO RELIEVE NEGATIVE PRESSURE FIGURE R202(1) AIR ADMITTANCE VALVE OPENS TO ADMIT AIR TO RELIEVE NEGATIVE PRESSURE
33	FIGURE R202(2) AIR ADMITTANCE VALVE CLOSES AND SEALS VENT UNDER ZERO OR POSITIVE PRESSURE FIGURE R202(2) AIR ADMITTANCE VALVE CLOSES AND SEALS VENT UNDER ZERO OR POSITIVE PRESSURE
34	FIGURE R202(3) AIR GAP, AIR BREAK FIGURE R202(3) AIR GAP, AIR BREAK
38	FIGURE R202(4) BRANCH VENT FIGURE R202(4) BRANCH VENT
39	FIGURE R202(5) DRAINAGE SYSTEM COMPONENTS FIGURE R202(5) DRAINAGE SYSTEM COMPONENTS
42	FIGURE R202(6) ELECTRIC HYDRONIC CONVECTOR FIGURE R202(6) ELECTRIC HYDRONIC CONVECTOR
46	FIGURE R202(7) FULL OPENING EXHAUST HOOD FIGURE R202(7) FULL OPENING EXHAUST HOOD
48	FIGURE R202(8) FIRE-SEPARATION DISTANCE FIGURE R202(8) FIRE-SEPARATION DISTANCE FIGURE R202(9) FIXTURE AND HORIZONTAL BRANCH DRAIN FIGURE R202(9) FIXTURE AND HORIZONTAL BRANCH DRAIN
49	FIGURE R202(10) FIXTURE DRAIN FIGURE R202(10) FIXTURE DRAIN
53	FIGURE R202(11) HEIGHT OF BUILDING FIGURE R202(11) HEIGHT OF BUILDING FIGURE R202(12) STORY HEIGHT FIGURE R202(12) STORY HEIGHT
54	FIGURE R202(13) HIGH-TEMPERATURE CHIMNEY FIGURE R202(13) HIGH-TEMPERATURE CHIMNEY
64	FIGURE R202(14) RUNNING BOND MASONRY FIGURE R202(14) RUNNING BOND MASONRY
68	FIGURE R202.(15) THREE-STORY BUILDING FIGURE R202.(15) THREE-STORY BUILDING
69	FIGURE R202(16) SUMP PUMP FIGURE R202(16) SUMP PUMP
70	FIGURE R202(17) DEPTH OF WATER SEAL FIGURE R202(17) DEPTH OF WATER SEAL
74	BIBLIOGRAPHY BIBLIOGRAPHY
75	PART III – BUILDING PLANNING AND CONSTRUCTION PART III – BUILDING PLANNING AND CONSTRUCTION CHAPTER 3: BUILDING PLANNING CHAPTER 3: BUILDING PLANNING GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE
76	SECTION R301 – DESIGN CRITERIA SECTION R301 – DESIGN CRITERIA
78	TABLE R301.2(1) CLIMATIC AND GEOGRAPHIC DESIGN CRITERIA TABLE R301.2(1) CLIMATIC AND GEOGRAPHIC DESIGN CRITERIA
79	TABLE R301.2(2) COMPONENT AND CLADDING LOADS FOR A BUILDING WITH A MEAN ROOF HEIGHT OF 30 FEET LOCATED IN EXPOSURE B TABLE R301.2(2) COMPONENT AND CLADDING LOADS FOR A BUILDING WITH A MEAN ROOF HEIGHT OF 30 FEET LOCATED IN EXPOSURE B
80	TABLE R301.2(3) HEIGHT AND EXPOSURE ADJUSTMENT COEFFICIENTS FOR TABLE R301.2(2) TABLE R301.2(3) HEIGHT AND EXPOSURE ADJUSTMENT COEFFICIENTS FOR TABLE R301.2(2)
81	FIGURE R301.2(1) ISOLINES OF THE 971/2 PERCENT WINTER (DECEMBER, JANUARY AND FEBRUARY) DESIGN TEMPERATURES ( F) FIGURE R301.2(1) ISOLINES OF THE 971/2 PERCENT WINTER (DECEMBER, JANUARY AND FEBRUARY) DESIGN TEMPERATURES ( F) FIGURE R301.2(2) SEISMIC DESIGN CATEGORIES—SITE CLASS D FIGURE R301.2(2) SEISMIC DESIGN CATEGORIES—SITE CLASS D
82	FIGURE R301.2(2)—continued SEISMIC DESIGN CATEGORIES—SITE CLASS D FIGURE R301.2(2)—continued SEISMIC DESIGN CATEGORIES—SITE CLASS D
83	FIGURE R301.2(2)—continued SEISMIC DESIGN CATEGORIES—SITE CLASS D FIGURE R301.2(2)—continued SEISMIC DESIGN CATEGORIES—SITE CLASS D
84	FIGURE R301.2(2)—continued SEISMIC DESIGN CATEGORIES—SITE CLASS D FIGURE R301.2(2)—continued SEISMIC DESIGN CATEGORIES—SITE CLASS D
85	FIGURE R301.2(2)—continued SEISMIC DESIGN CATEGORIES—SITE CLASS D FIGURE R301.2(2)—continued SEISMIC DESIGN CATEGORIES—SITE CLASS D
86	FIGURE R301.2(3) WEATHERING PROBABILITY MAP FOR CONCRETE FIGURE R301.2(3) WEATHERING PROBABILITY MAP FOR CONCRETE
87	FIGURE R301.2(4) BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL FIGURE R301.2(4) BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL
88	FIGURE R301.2(4)—continued BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL FIGURE R301.2(4)—continued BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL
89	FIGURE R301.2(4)—continued BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL FIGURE R301.2(4)—continued BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL
90	FIGURE R301.2(4)—continued BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL FIGURE R301.2(4)—continued BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL
91	FIGURE R301.2(4)—continued BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL FIGURE R301.2(4)—continued BASIC WIND SPEEDS FOR 50-YEAR MEAN RECURRENCE INTERVAL
92	FIGURE R301.2(5) GROUND SNOW LOADS, Pg, FOR THE UNITED STATES (lb/ft2) FIGURE R301.2(5) GROUND SNOW LOADS, Pg, FOR THE UNITED STATES (lb/ft2)
93	FIGURE R301.2(5)—continued GROUND SNOW LOADS, Pg, FOR THE UNITED STATES (lb/ft2) FIGURE R301.2(5)—continued GROUND SNOW LOADS, Pg, FOR THE UNITED STATES (lb/ft2)
94	FIGURE R301.2(6) TERMITE INFESTATION PROBABILITY MAP FIGURE R301.2(6) TERMITE INFESTATION PROBABILITY MAP
95	FIGURE R301.2(7) COMPONENT AND CLADDING PRESSURE ZONES FIGURE R301.2(7) COMPONENT AND CLADDING PRESSURE ZONES FIGURE R301.2(8) FROST LINE DEPTH FIGURE R301.2(8) FROST LINE DEPTH
96	FIGURE R301.2.1 WIND FORCES ACTING ON AREA FIGURE R301.2.1 WIND FORCES ACTING ON AREA TABLE R301.2.1.2 WINDBORNE DEBRIS PROTECTION FASTENING SCHEDULE FOR WOOD STRUCTURAL PANELSa, b, c, d TABLE R301.2.1.2 WINDBORNE DEBRIS PROTECTION FASTENING SCHEDULE FOR WOOD STRUCTURAL PANELSa, b, c, d
97	TABLE R301.2.1.3 EQUIVALENT BASIC WIND SPEEDSa TABLE R301.2.1.3 EQUIVALENT BASIC WIND SPEEDSa
98	FIGURE R301.2.1.5.1(1) TOPOGRAPHIC FEATURES FOR WIND SPEED-UP EFFECT FIGURE R301.2.1.5.1(1) TOPOGRAPHIC FEATURES FOR WIND SPEED-UP EFFECT
99	FIGURE R301.2.1.5.1(2) ILLUSTRATION OF WHERE ON A TOPOGRAPHIC FEATURE, WIND SPEED INCREASE IS APPLIED FIGURE R301.2.1.5.1(2) ILLUSTRATION OF WHERE ON A TOPOGRAPHIC FEATURE, WIND SPEED INCREASE IS APPLIED FIGURE R301.2.1.5.1(3) ILLUSTRATION OF UPWIND OBSTRUCTION FIGURE R301.2.1.5.1(3) ILLUSTRATION OF UPWIND OBSTRUCTION
100	TABLE R301.2.1.5.1 BASIC WIND MODIFICATION FOR TOPOGRAPHIC WIND EFFECT TABLE R301.2.1.5.1 BASIC WIND MODIFICATION FOR TOPOGRAPHIC WIND EFFECT
101	FIGURE R301.2.2 SEISMIC FORCE FIGURE R301.2.2 SEISMIC FORCE
102	TABLE R301.2.2.1.1 SEISMIC DESIGN CATEGORY DETERMINATION TABLE R301.2.2.1.1 SEISMIC DESIGN CATEGORY DETERMINATION
103	TABLE R301.2.2.2.1 WALL BRACING ADJUSTMENT FACTORS BY ROOF COVERING DEAD LOADa TABLE R301.2.2.2.1 WALL BRACING ADJUSTMENT FACTORS BY ROOF COVERING DEAD LOADa
105	FIGURE R301.2.2.2.5(1) BRACED WALL PANELS OUT OF PLANE FIGURE R301.2.2.2.5(1) BRACED WALL PANELS OUT OF PLANE FIGURE R301.2.2.2.5(2) BRACED WALL PANELS SUPPORTED BY CANTILEVER OR SET BACK FIGURE R301.2.2.2.5(2) BRACED WALL PANELS SUPPORTED BY CANTILEVER OR SET BACK
106	FIGURE R301.2.2.2.5(3) FLOOR OR ROOF NOT SUPPORTED AT ALL EDGES FIGURE R301.2.2.2.5(3) FLOOR OR ROOF NOT SUPPORTED AT ALL EDGES FIGURE R301.2.2.2.5(4) ROOF OR FLOOR EXTENSION BEYOND BRACED WALL LINE FIGURE R301.2.2.2.5(4) ROOF OR FLOOR EXTENSION BEYOND BRACED WALL LINE FIGURE R301.2.2.2.5(5) BRACED WALL PANEL EXTENSION OVER OPENING FIGURE R301.2.2.2.5(5) BRACED WALL PANEL EXTENSION OVER OPENING
107	FIGURE R301.2.2.2.5(6) OPENING LIMITATIONS FOR FLOOR AND ROOF DIAPHRAGMS FIGURE R301.2.2.2.5(6) OPENING LIMITATIONS FOR FLOOR AND ROOF DIAPHRAGMS FIGURE R301.2.2.2.5(7) PORTIONS OF FLOOR LEVEL OFFSET VERTICALLY FIGURE R301.2.2.2.5(7) PORTIONS OF FLOOR LEVEL OFFSET VERTICALLY FIGURE R301.2.2.2.5(8) BRACED WALL LINES NOT PERPENDICULAR FIGURE R301.2.2.2.5(8) BRACED WALL LINES NOT PERPENDICULAR
110	TABLE R301.4 MINIMUM DESIGN DEAD LOADS FOR TYPICAL RESIDENTIAL COMPONENTS TABLE R301.4 MINIMUM DESIGN DEAD LOADS FOR TYPICAL RESIDENTIAL COMPONENTS
111	TABLE R301.5 MINIMUM UNIFORMLY DISTRIBUTED LIVE LOADS (in pounds per square foot) TABLE R301.5 MINIMUM UNIFORMLY DISTRIBUTED LIVE LOADS (in pounds per square foot)
112	TABLE R301.6 MINIMUM ROOF LIVE LOADS IN POUNDS-FORCE PER SQUARE FOOT OF HORIZONTAL PROJECTION TABLE R301.6 MINIMUM ROOF LIVE LOADS IN POUNDS-FORCE PER SQUARE FOOT OF HORIZONTAL PROJECTION TABLE R301.7 ALLOWABLE DEFLECTION OF STRUCTURAL MEMBERSa, b, c, d, e TABLE R301.7 ALLOWABLE DEFLECTION OF STRUCTURAL MEMBERSa, b, c, d, e FIGURE R301.7 BEAM DEFLECTION FIGURE R301.7 BEAM DEFLECTION
113	SECTION R302 – FIRE-RESISTANT CONSTRUCTION SECTION R302 – FIRE-RESISTANT CONSTRUCTION TABLE R302.1 EXTERIOR WALLS TABLE R302.1 EXTERIOR WALLS
114	FIGURE R302.1(1) EXTERIOR WALLS AND PROJECTIONS FIGURE R302.1(1) EXTERIOR WALLS AND PROJECTIONS
115	FIGURE R302.1(2) EXTERIOR WALL FIRE-RESISTANCE-RATED REQUIREMENTS AND PROHIBITED OPENINGS FIGURE R302.1(2) EXTERIOR WALL FIRE-RESISTANCE-RATED REQUIREMENTS AND PROHIBITED OPENINGS FIGURE R302.1(3) EXTERIOR WALL FIRE-RESISTANCE-RATED REQUIREMENTS AND PROHIBITED OPENINGS FIGURE R302.1(3) EXTERIOR WALL FIRE-RESISTANCE-RATED REQUIREMENTS AND PROHIBITED OPENINGS
116	FIGURE R302.2 DWELLING UNIT SEPARATION FOR TOWNHOUSES FIGURE R302.2 DWELLING UNIT SEPARATION FOR TOWNHOUSES
118	FIGURE R302.2.2(1) PARAPET REQUIREMENTS FOR WALL BETWEEN TOWNHOUSES FIGURE R302.2.2(1) PARAPET REQUIREMENTS FOR WALL BETWEEN TOWNHOUSES FIGURE R302.2.2(2) EXCEPTION TO ELIMINATE PARAPET FIGURE R302.2.2(2) EXCEPTION TO ELIMINATE PARAPET
119	FIGURE R302.2.3 PARPET REQUIREMENTS FIGURE R302.2.3 PARPET REQUIREMENTS
120	FIGURE R302.3 DWELLING UNIT SEPARATIONS FIGURE R302.3 DWELLING UNIT SEPARATIONS
121	FIGURE R302.3.1 SUPPORT OF DWELLING UNIT SEPARATION FIGURE R302.3.1 SUPPORT OF DWELLING UNIT SEPARATION
122	FIGURE R302.4.1 TYPES OF PENETRATIONS FIGURE R302.4.1 TYPES OF PENETRATIONS
124	FIGURE R302.4.2(1) MEMBRANE PENETRATION BY OUTLET B FIGURE R302.4.2(1) MEMBRANE PENETRATION BY OUTLET B
125	FIGURE R302.4.2(2) EXCEPTION TO ANNULAR SPACE PROTECTION FIGURE R302.4.2(2) EXCEPTION TO ANNULAR SPACE PROTECTION
126	FIGURE R302.5.2 GARAGE/DWELLING SEPARATION FIGURE R302.5.2 GARAGE/DWELLING SEPARATION
127	TABLE R302.6 DWELLING/GARAGE SEPARATION TABLE R302.6 DWELLING/GARAGE SEPARATION
128	FIGURE R302.6 SEPARATION BETWEEN ATTACHED GARAGES AND DWELLING UNITS FIGURE R302.6 SEPARATION BETWEEN ATTACHED GARAGES AND DWELLING UNITS
130	FIGURE R302.9.4 INTERIOR FIRE TEST ROOM DIMENSIONS FIGURE R302.9.4 INTERIOR FIRE TEST ROOM DIMENSIONS
131	FIGURE R302.10.1 INSULATION FACING FIGURE R302.10.1 INSULATION FACING
132	FIGURE R302.11(1) FIRESTOPPING—BALLOON FRAMING FIGURE R302.11(1) FIRESTOPPING—BALLOON FRAMING
133	FIGURE R302.11(2) FIRESTOPPING—PLATFORM FRAMING FIGURE R302.11(2) FIRESTOPPING—PLATFORM FRAMING FIGURE R302.11(3) FIRESTOPPING—FURRED SOFFIT FIGURE R302.11(3) FIRESTOPPING—FURRED SOFFIT
134	FIGURE R302.11(4) FIRESTOPPING—DROPPED CEILING FIGURE R302.11(4) FIRESTOPPING—DROPPED CEILING FIGURE R302.11(5) FIRESTOPPING—COVE CEILING FIGURE R302.11(5) FIRESTOPPING—COVE CEILING
135	FIGURE R302.11(6) FIRESTOPPING—AT TUB FIGURE R302.11(6) FIRESTOPPING—AT TUB FIGURE R302.11(7) FIRESTOPPING—AT STAIRWAYS FIGURE R302.11(7) FIRESTOPPING—AT STAIRWAYS
136	FIGURE R302.11(8) FIRESTOPPING—AROUND PIPING FIGURE R302.11(8) FIRESTOPPING—AROUND PIPING FIGURE R302.11(9) FIRESTOPPING—AROUND CHIMNEYS AND FIREPLACES FIGURE R302.11(9) FIRESTOPPING—AROUND CHIMNEYS AND FIREPLACES
138	FIGURE 302.12(1) DRAFTSTOPPING OF CEILING SUSPENDED UNDER FLOOR FRAMING FIGURE 302.12(1) DRAFTSTOPPING OF CEILING SUSPENDED UNDER FLOOR FRAMING FIGURE 302.12(2) DRAFTSTOPPING OF TRUSS-TYPE FLOOR FRAMING FIGURE 302.12(2) DRAFTSTOPPING OF TRUSS-TYPE FLOOR FRAMING
139	SECTION R303 LIGHT, VENTILATION AND HEATING SECTION R303 LIGHT, VENTILATION AND HEATING
140	FIGURE R303.2 NATURAL LIGHT FIGURE R303.2 NATURAL LIGHT
141	FIGURE R303.4.1AIR INTAKE OPENING LOCATIONS FIGURE R303.4.1AIR INTAKE OPENING LOCATIONS
142	FIGURE R303.6 STAIRWAY ILLUMINATION FIGURE R303.6 STAIRWAY ILLUMINATION
143	SECTION R304 – MINIMUM ROOM AREAS SECTION R304 – MINIMUM ROOM AREAS
144	FIGURE R303.8 REQUIRED HEATING FIGURE R303.8 REQUIRED HEATING FIGURE R304.1 FLOOR AREA FIGURE R304.1 FLOOR AREA
145	FIGURE R304.4 HEIGHT EFFECT ON ROOM AREA FIGURE R304.4 HEIGHT EFFECT ON ROOM AREA SECTION R305 – CEILING HEIGHT SECTION R305 – CEILING HEIGHT
146	SECTION R306 – SANITATION SECTION R306 – SANITATION SECTION R307 – TOILET, BATH AND SHOWER SPACES SECTION R307 – TOILET, BATH AND SHOWER SPACES FIGURE R307.1 MINIMUM FIXTURE CLEARANCES FIGURE R307.1 MINIMUM FIXTURE CLEARANCES
147	SECTION R308 – GLAZING SECTION R308 – GLAZING
149	TABLE R308.3.1(1) MINIMUM CATEGORY CLASSIFICATION OF GLAZING USING CPSC 16 CFR 1201 TABLE R308.3.1(1) MINIMUM CATEGORY CLASSIFICATION OF GLAZING USING CPSC 16 CFR 1201 TABLE R308.3.1(2) MINIMUM CATEGORY CLASSIFICATION OF GLAZING USING ANSI Z97.1 TABLE R308.3.1(2) MINIMUM CATEGORY CLASSIFICATION OF GLAZING USING ANSI Z97.1
151	FIGURE R308.4(1) HAZARDOUS LOCATIONS FIGURE R308.4(1) HAZARDOUS LOCATIONS
152	FIGURE R308.4(2) PROTECTIVE BAR ALTERNATI FIGURE R308.4(2) PROTECTIVE BAR ALTERNATI FIGURE R308.4(3) GLASS IN SIDELIGHTS—ELEVATION FIGURE R308.4(3) GLASS IN SIDELIGHTS—ELEVATION
153	FIGURE R308.4(4) GLASS IN SIDELIGHTS—PLAN FIGURE R308.4(4) GLASS IN SIDELIGHTS—PLAN FIGURE R308.4(5) BARRIER BETWEEN GLAZING AND DOOR FIGURE R308.4(5) BARRIER BETWEEN GLAZING AND DOOR
154	FIGURE R308.4(6) GLASS IN SIDELIGHTS—DWELLINGS FIGURE R308.4(6) GLASS IN SIDELIGHTS—DWELLINGS FIGURE R308.4(7) GLAZING WITHIN A SHOWER ENCLOSURE FIGURE R308.4(7) GLAZING WITHIN A SHOWER ENCLOSURE
155	FIGURE R308.4(8) GLAZING ADJACENT TO SWIMMING POOL OR SPA FIGURE R308.4(8) GLAZING ADJACENT TO SWIMMING POOL OR SPA FIGURE R308.4(9) GLAZING ADJACENT TO STAIRWAYS FIGURE R308.4(9) GLAZING ADJACENT TO STAIRWAYS
157	SECTION R309 – GARAGES AND CARPORTS SECTION R309 – GARAGES AND CARPORTS
158	SECTION R310 – EMERGENCY ESCAPE AND RESCUE OPENINGS SECTION R310 – EMERGENCY ESCAPE AND RESCUE OPENINGS
159	FIGURE R310.1 EMERGENCY ESCAPE AND RESCUE WINDOW FIGURE R310.1 EMERGENCY ESCAPE AND RESCUE WINDOW
160	FIGURE R310.2 WINDOW WELLS FIGURE R310.2 WINDOW WELLS
161	SECTION R311 – MEANS OF EGRESS SECTION R311 – MEANS OF EGRESS
162	FIGURE R311.3.1 THRESHOLD HEIGHTS FIGURE R311.3.1 THRESHOLD HEIGHTS
164	FIGURE R311.7.1 STAIRWAY CLEARANCES FIGURE R311.7.1 STAIRWAY CLEARANCES FIGURE R311.7.2(1) MINIMUM HEADROOM FIGURE R311.7.2(1) MINIMUM HEADROOM
165	FIGURE R311.7.2(2) EXAMPLE OF EXCEPTION TO SECTION R311.7.2 FIGURE R311.7.2(2) EXAMPLE OF EXCEPTION TO SECTION R311.7.2
166	FIGURE R311.7.4.1(1) CONVENTIAL STAIRWAY FIGURE R311.7.4.1(1) CONVENTIAL STAIRWAY
167	FIGURE R311.7.4.1(2) STAIR TOLERANCES FIGURE R311.7.4.1(2) STAIR TOLERANCES
168	FIGURE R311.7.4.2(1) WINDERS FIGURE R311.7.4.2(1) WINDERS FIGURE R311.7.4.2(2) WINDERS USED FOR CIRCULAR STAIRWAY FIGURE R311.7.4.2(2) WINDERS USED FOR CIRCULAR STAIRWAY
169	FIGURE R311.7.4.3 TREAD PROFILE FIGURE R311.7.4.3 TREAD PROFILE
170	FIGURE R311.7.5 LANDINGS AT DOORS FIGURE R311.7.5 LANDINGS AT DOORS
171	FIGURE R311.7.7.2 HANDRAILS FIGURE R311.7.7.2 HANDRAILS
172	FIGURE R311.7.7.3(1) TYPE 1 HANDRAIL FIGURE R311.7.7.3(1) TYPE 1 HANDRAIL FIGURE R311.7.7.3(2) TYPE II HANDRAIL FIGURE R311.7.7.3(2) TYPE II HANDRAIL
173	FIGURE R311.7.9.1 SPIRAL STAIRS FIGURE R311.7.9.1 SPIRAL STAIRS FIGURE R311.7.9.2 BULKHEAD ENCLOSURE STAIRWAY FIGURE R311.7.9.2 BULKHEAD ENCLOSURE STAIRWAY
174	SECTION R312 – GUARDS SECTION R312 – GUARDS
175	FIGURE R312.1 DROP OFF AND GUARD HEIGHT REQUIREMENTS FIGURE R312.1 DROP OFF AND GUARD HEIGHT REQUIREMENTS
176	FIGURE R312.2(1) STAIRWAY GUARD FIGURE R312.2(1) STAIRWAY GUARD FIGURE R312.2(2) STAIRWAY GUARD FIGURE R312.2(2) STAIRWAY GUARD
177	SECTION R313 – AUTOMATIC FIRE SPRINKLER SYSTEMS SECTION R313 – AUTOMATIC FIRE SPRINKLER SYSTEMS FIGURE R312.3 GUARD REQUIREMENTS FIGURE R312.3 GUARD REQUIREMENTS
178	SECTION R314 – SMOKE ALARMS SECTION R314 – SMOKE ALARMS
179	FIGURE R314.3(1) LOCATION OF SMOKE ALARMS FIGURE R314.3(1) LOCATION OF SMOKE ALARMS FIGURE R314.3(2) SMOKE ALARM LOCATION FIGURE R314.3(2) SMOKE ALARM LOCATION
180	SECTION R315 – CARBON MONOXIDE ALARMS SECTION R315 – CARBON MONOXIDE ALARMS
181	FIGURE R315.1 LOCATION OF CARBON MONOXIDE ALARMS FIGURE R315.1 LOCATION OF CARBON MONOXIDE ALARMS SECTION R316 – FOAM PLASTIC SECTION R316 – FOAM PLASTIC
182	FIGURE R316.1 USE AND INSTALLATION REQUIREMENTS OF FOAM PLASTIC IN BUILDING CONSTRUCTION FIGURE R316.1 USE AND INSTALLATION REQUIREMENTS OF FOAM PLASTIC IN BUILDING CONSTRUCTION
184	FIGURE R316.5.1 ENCAPSULATED FOAM PLASTIC FIGURE R316.5.1 ENCAPSULATED FOAM PLASTIC
185	FIGURE R316.5.3 FOAM PLASTIC, ATTIC AND CRAWL SPACES FIGURE R316.5.3 FOAM PLASTIC, ATTIC AND CRAWL SPACES
188	FIGURE R316.5.11 FOAM PLASTIC SPRAY APPLIED TO SILL PLATE AND HEADER FIGURE R316.5.11 FOAM PLASTIC SPRAY APPLIED TO SILL PLATE AND HEADER
189	SECTION R317 – PROTECTION OF WOOD AND WOOD BASED PRODUCTS AGAINST DECAY SECTION R317 – PROTECTION OF WOOD AND WOOD BASED PRODUCTS AGAINST DECAY FIGURE R317.1(1) MINIMUM SEPARATION OF NONTREATED WOOD FROM GROUND FIGURE R317.1(1) MINIMUM SEPARATION OF NONTREATED WOOD FROM GROUND
190	FIGURE R317.1(2) WOOD SILLS ON FOUNDATION WALLS FIGURE R317.1(2) WOOD SILLS ON FOUNDATION WALLS FIGURE R317.1(3) WOOD SILLS AND SLEEPERS FIGURE R317.1(3) WOOD SILLS AND SLEEPERS
191	FIGURE R317.1(4) NONTREATED WOOD PROJECTING INTO A BEAM POCKET FIGURE R317.1(4) NONTREATED WOOD PROJECTING INTO A BEAM POCKET FIGURE R317.1(5) NONTREATED WOOD SIDING OR SHEATHING FIGURE R317.1(5) NONTREATED WOOD SIDING OR SHEATHING
192	FIGURE R317.1.2 WOOD POST EMBEDDED IN CONCRETE FIGURE R317.1.2 WOOD POST EMBEDDED IN CONCRETE
193	FIGURE R317.1.4 WOOD POST ON PERMEABLE PAD FIGURE R317.1.4 WOOD POST ON PERMEABLE PAD
194	FIGURE R317.2.1 TYPICAL LABEL FOR PRESSURE-TREATED WOOD FIGURE R317.2.1 TYPICAL LABEL FOR PRESSURE-TREATED WOOD
195	SECTION R318 – PROTECTION AGAINST SUBTERRANEAN TERMITES SECTION R318 – PROTECTION AGAINST SUBTERRANEAN TERMITES
196	SECTION R319 – SITE ADDRESS SECTION R319 – SITE ADDRESS SECTION R320 – ACCESSIBILITY SECTION R320 – ACCESSIBILITY
197	SECTION R321 – ELEVATORS AND PLATFORM LIFTS SECTION R321 – ELEVATORS AND PLATFORM LIFTS
198	SECTION R322 – FLOOD-RESISTANT CONSTRUCTION SECTION R322 – FLOOD-RESISTANT CONSTRUCTION
202	FIGURE R322.2 LIMITS OF MODERATE WAVE ACTION FIGURE R322.2 LIMITS OF MODERATE WAVE ACTION
206	SECTION R323 – STORM SHELTERS SECTION R323 – STORM SHELTERS BIBLIOGRAPHY BIBLIOGRAPHY
211	CHAPTER 4: FOUNDATIONS CHAPTER 4: FOUNDATIONS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION R401 – GENERAL SECTION R401 – GENERAL
212	FIGURE R401.3(1) LOT GRADING EXAMPLE FIGURE R401.3(1) LOT GRADING EXAMPLE
213	TABLE R401.4.1 – PRESUMPTIVE LOAD-BEARING VALUES OFFOUNDATION MATERIALSa TABLE R401.4.1 – PRESUMPTIVE LOAD-BEARING VALUES OFFOUNDATION MATERIALSa FIGURE R401.3(2) LOT GRADING EXAMPLE FIGURE R401.3(2) LOT GRADING EXAMPLE
214	SECTION R402 – MATERIALS SECTION R402 – MATERIALS FIGURE R402.1.2 EXAMPLE OF QUALITY MARK FOR PRESSURE-TREATED LUMBER FIGURE R402.1.2 EXAMPLE OF QUALITY MARK FOR PRESSURE-TREATED LUMBER
215	TABLE R402.2 MINIMUM SPECIFIED COMPRESSIVE STRENGTH OF CONCRETE TABLE R402.2 MINIMUM SPECIFIED COMPRESSIVE STRENGTH OF CONCRETE
216	SECTION R403 FOOTINGS SECTION R403 FOOTINGS TABLE R403.1 MINIMUM WIDTH OF CONCRETE,PRECAST OR MASONRY FOOTINGS(inches)a TABLE R403.1 MINIMUM WIDTH OF CONCRETE,PRECAST OR MASONRY FOOTINGS(inches)a
217	FIGURE R403.1(1) CONCRETE AND MASONRY FOUNDATION DETAILS FIGURE R403.1(1) CONCRETE AND MASONRY FOUNDATION DETAILS
218	FIGURE R403.1(2) PERMANENT WOOD FOUNDATION BASEMENT WALL SECTION FIGURE R403.1(2) PERMANENT WOOD FOUNDATION BASEMENT WALL SECTION
219	FIGURE R403.1(3) PERMANENT WOOD FOUNDATION CRAWL SPACE SECTION FIGURE R403.1(3) PERMANENT WOOD FOUNDATION CRAWL SPACE SECTION
220	FIGURE R403.1.3.2 DOWELS FOR SLABS-ON-GROUND WITH TURNED-DOWN FOOTINGS FIGURE R403.1.3.2 DOWELS FOR SLABS-ON-GROUND WITH TURNED-DOWN FOOTINGS
221	FIGURE R403.1.4 RECOMMENDATION FOR ADJACENT FOOTINGS AT DIFFERENT ELEVATIONS FIGURE R403.1.4 RECOMMENDATION FOR ADJACENT FOOTINGS AT DIFFERENT ELEVATIONS
222	FIGURE R403.1.5 RECOMMENDATION FOR STEPPED WALL FOOTINGS FIGURE R403.1.5 RECOMMENDATION FOR STEPPED WALL FOOTINGS
223	FIGURE R403.1.6 WOOD SILL PLATE ANCHORAGE TO FOUNDATIONS FIGURE R403.1.6 WOOD SILL PLATE ANCHORAGE TO FOUNDATIONS
224	FIGURE R403.1.7.1 FOUNDATION CLEARANCE FROM SLOPES FIGURE R403.1.7.1 FOUNDATION CLEARANCE FROM SLOPES
225	FIGURE R403.1.7.2(1) BUILDINGS ADJACENT TO ASCENDING SLOPE EXCEEDING 1 TO 1 FIGURE R403.1.7.2(1) BUILDINGS ADJACENT TO ASCENDING SLOPE EXCEEDING 1 TO 1 FIGURE R403.1.7.2(2) BUILDINGS ADJACENT TO DESCENDING SLOPE EXCEEDING ONE TO ONE FIGURE R403.1.7.2(2) BUILDINGS ADJACENT TO DESCENDING SLOPE EXCEEDING ONE TO ONE
226	FIGURE R403.1.7.3 DETERMINATION OF FOUNDATION ELEVATION ON GRADED SITES FIGURE R403.1.7.3 DETERMINATION OF FOUNDATION ELEVATION ON GRADED SITES
227	TABLE R403.3(1) MINIMUM FOOTING DEPTH AND INSULATION REQUIREMENTS FOR FROST-PROTECTED FOOTINGS IN HEATED BUILDINGSa TABLE R403.3(1) MINIMUM FOOTING DEPTH AND INSULATION REQUIREMENTS FOR FROST-PROTECTED FOOTINGS IN HEATED BUILDINGSa
228	FIGURE R403.3(1) INSULATION PLACEMENT FOR FROST-PROTECTED FOOTINGS IN HEATED BUILDINGS FIGURE R403.3(1) INSULATION PLACEMENT FOR FROST-PROTECTED FOOTINGS IN HEATED BUILDINGS
230	FIGURE R403.3(2) AIR-FREEZING INDEX AN ESTIMATE OF THE 100-YEAR RETURN PERIOD FIGURE R403.3(2) AIR-FREEZING INDEX AN ESTIMATE OF THE 100-YEAR RETURN PERIOD
231	TABLE R403.3(2) AIR-FREEZING INDEX FOR U.S. LOCATIONS BY COUNTY TABLE R403.3(2) AIR-FREEZING INDEX FOR U.S. LOCATIONS BY COUNTY
232	TABLE R403.3(2)—continuedAIR-FREEZING INDEX FOR U.S. LOCATIONS BY COUNTY TABLE R403.3(2)—continuedAIR-FREEZING INDEX FOR U.S. LOCATIONS BY COUNTY
233	TABLE R403.3(2)—continued AIR-FREEZING INDEX FOR U.S. LOCATIONS BY COUNTY TABLE R403.3(2)—continued AIR-FREEZING INDEX FOR U.S. LOCATIONS BY COUNTY
234	TABLE R403.3(2)—continued AIR-FREEZING INDEX FOR U.S. LOCATIONS BY COUNTY TABLE R403.3(2)—continued AIR-FREEZING INDEX FOR U.S. LOCATIONS BY COUNTY
235	FIGURE R403.3(3) INSULATION PLACEMENT FOR FROST-PROTECTED FOOTING ADJACENT TO UNHEATED SLAB-ON-GROUND STRUCTURE FIGURE R403.3(3) INSULATION PLACEMENT FOR FROST-PROTECTED FOOTING ADJACENT TO UNHEATED SLAB-ON-GROUND STRUCTURE
236	FIGURE R403.3(4) INSULATION PLACEMENT FOR FROST-PROTECTED FOOTINGS ADJACENT TO HEATED STRUCTURE FIGURE R403.3(4) INSULATION PLACEMENT FOR FROST-PROTECTED FOOTINGS ADJACENT TO HEATED STRUCTURE TABLE R403.4 MINIMUM DEPTH OF CRUSHED STONE FOOTINGS (D), (inches) TABLE R403.4 MINIMUM DEPTH OF CRUSHED STONE FOOTINGS (D), (inches)
237	SECTION R404 – FOUNDATION AND RETAINING WALLS SECTION R404 – FOUNDATION AND RETAINING WALLS FIGURE R403.4(1) BASEMENT OR CRAWL SPACE WITH PRECAST FOUNDATION WALL BEARING ON CRUSHED STONE FIGURE R403.4(1) BASEMENT OR CRAWL SPACE WITH PRECAST FOUNDATION WALL BEARING ON CRUSHED STONE FIGURE R403.4(2) BASEMENT OR CRAWL SPACE WITH PRECAST FOUNDATION WALL ON SPREAD FOOTING FIGURE R403.4(2) BASEMENT OR CRAWL SPACE WITH PRECAST FOUNDATION WALL ON SPREAD FOOTING
238	FIGURE R404.1.1 FOUNDATION WALL WITH UNBALANCED FILL FIGURE R404.1.1 FOUNDATION WALL WITH UNBALANCED FILL
239	TABLE R404.1.1(1) PLAIN MASONRY FOUNDATION WALLS TABLE R404.1.1(1) PLAIN MASONRY FOUNDATION WALLS
240	TABLE R404.1.1(2) 8-INCH MASONRY FOUNDATION WALLS WITH REINFORCING WHERE d > 5 INCHESa, c TABLE R404.1.1(2) 8-INCH MASONRY FOUNDATION WALLS WITH REINFORCING WHERE d > 5 INCHESa, c
241	TABLE R404.1.1(3) 10-INCH FOUNDATION WALLS WITH REINFORCING WHERE d > 6.75 INCHESa, c TABLE R404.1.1(3) 10-INCH FOUNDATION WALLS WITH REINFORCING WHERE d > 6.75 INCHESa, c
242	TABLE R404.1.1(4) 12-INCH MASONRY FOUNDATION WALLS WITH REINFORCING WHERE d > 8.75 INCHESa, c TABLE R404.1.1(4) 12-INCH MASONRY FOUNDATION WALLS WITH REINFORCING WHERE d > 8.75 INCHESa, c
244	TABLE R404.1.2(1) MINIMUM HORIZONTAL REINFORCEMENT FOR CONCRETE BASEMENT WALLSa, b TABLE R404.1.2(1) MINIMUM HORIZONTAL REINFORCEMENT FOR CONCRETE BASEMENT WALLSa, b TABLE R404.1.2(2) MINIMUM VERTICAL REINFORCEMENT FOR 6-INCH NOMINAL FLAT CONCRETE BASEMENT WALLS b, c, d, e, g, h, i, j TABLE R404.1.2(2) MINIMUM VERTICAL REINFORCEMENT FOR 6-INCH NOMINAL FLAT CONCRETE BASEMENT WALLS b, c, d, e, g, h, i, j
245	TABLE R404.1.2(3) MINIMUM VERTICAL REINFORCEMENT FOR 8-INCH (203 mm) NOMINAL FLAT CONCRETE BASEMENT WALLSb, c, d, e, f, h, i TABLE R404.1.2(3) MINIMUM VERTICAL REINFORCEMENT FOR 8-INCH (203 mm) NOMINAL FLAT CONCRETE BASEMENT WALLSb, c, d, e, f, h, i
246	TABLE R404.1.2(4) MINIMUM VERTICAL REINFORCEMENT FOR 10-INCH NOMINAL FLAT CONCRETE BASEMENT WALLSb, c, d, e, f, h, i TABLE R404.1.2(4) MINIMUM VERTICAL REINFORCEMENT FOR 10-INCH NOMINAL FLAT CONCRETE BASEMENT WALLSb, c, d, e, f, h, i
247	TABLE R404.1.2(5) MINIMUM VERTICAL WALL REINFORCEMENT FOR 6-INCH WAFFLE-GRID BASEMENT WALLSb, c, d, e, g, h, i TABLE R404.1.2(5) MINIMUM VERTICAL WALL REINFORCEMENT FOR 6-INCH WAFFLE-GRID BASEMENT WALLSb, c, d, e, g, h, i
248	TABLE R404.1.2(6) MINIMUM VERTICAL REINFORCEMENT FOR 8-INCH WAFFLE-GRID BASEMENT WALLSb, c, d, e, f, h, i, j TABLE R404.1.2(6) MINIMUM VERTICAL REINFORCEMENT FOR 8-INCH WAFFLE-GRID BASEMENT WALLSb, c, d, e, f, h, i, j
249	TABLE R404.1.2(7) MINIMUM VERTICAL REINFORCEMENT FOR 6-INCH (152 mm) SCREEN-GRID BASEMENT WALLSb, c, d, e, g, h, i, TABLE R404.1.2(7) MINIMUM VERTICAL REINFORCEMENT FOR 6-INCH (152 mm) SCREEN-GRID BASEMENT WALLSb, c, d, e, g, h, i,
250	TABLE R404.1.2(8) MINIMUM VERTICAL REINFORCEMENT FOR 6-, 8-, 10-INCH AND 12-INCH NOMINAL FLAT BASEMENT WALLSb, c, d, e, f, h, i, k, n TABLE R404.1.2(8) MINIMUM VERTICAL REINFORCEMENT FOR 6-, 8-, 10-INCH AND 12-INCH NOMINAL FLAT BASEMENT WALLSb, c, d, e, f, h, i, k, n
251	TABLE R404.1.2(9) MINIMUM SPACING FOR ALTERNATE BAR SIZE AND/OR ALTERNATE GRADE OF STEELa, b, c TABLE R404.1.2(9) MINIMUM SPACING FOR ALTERNATE BAR SIZE AND/OR ALTERNATE GRADE OF STEELa, b, c
252	TABLE R404.1.2(9)—continued MINIMUM SPACING FOR ALTERNATE BAR SIZE AND/OR ALTERNATE GRADE OF STEELa, b, c TABLE R404.1.2(9)—continued MINIMUM SPACING FOR ALTERNATE BAR SIZE AND/OR ALTERNATE GRADE OF STEELa, b, c
258	FIGURE R404.1.5(1) FOUNDATION WALL CLAY MASONRY CURTAIN WALL WITH CONCRETE MASONRY PIERS FIGURE R404.1.5(1) FOUNDATION WALL CLAY MASONRY CURTAIN WALL WITH CONCRETE MASONRY PIERS
259	FIGURE R404.1.7 BEARING FOUNDATION WALLS AGAINST LATERAL EARTH PRESSURE FIGURE R404.1.7 BEARING FOUNDATION WALLS AGAINST LATERAL EARTH PRESSURE
260	TABLE R404.2.3 PLYWOOD GRADE AND THICKNESS FOR WOOD FOUNDATION CONSTRUCTION (30 pcf equivalent-fluid weight soil pressure) TABLE R404.2.3 PLYWOOD GRADE AND THICKNESS FOR WOOD FOUNDATION CONSTRUCTION (30 pcf equivalent-fluid weight soil pressure)
261	SECTION R405 – FOUNDATION DRAINAGE SECTION R405 – FOUNDATION DRAINAGE
262	TABLE R405.1 PROPERTIES OF SOILS CLASSIFIED ACCORDING TO THE UNIFIED SOIL CLASSIFICATION SYSTEM TABLE R405.1 PROPERTIES OF SOILS CLASSIFIED ACCORDING TO THE UNIFIED SOIL CLASSIFICATION SYSTEM
263	FIGURE R405.1(1) FOUNDATION DRAINAGE FOR HABITABLE SPACE BELOW GRADE FIGURE R405.1(1) FOUNDATION DRAINAGE FOR HABITABLE SPACE BELOW GRADE
264	FIGURE R405.1(2) OTHER SUGGESTED METHODS OF FOUNDATION DRAINAGE FIGURE R405.1(2) OTHER SUGGESTED METHODS OF FOUNDATION DRAINAGE
265	SECTION R406 – FOUNDATION WATERPROOFING AND DAMPPROOFING SECTION R406 – FOUNDATION WATERPROOFING AND DAMPPROOFING FIGURE R406.1(1) DAMPPROOFING OF MASONRY FOUNDATION WALL [SEE ALSO FIGURE R405.1(1)] FIGURE R406.1(1) DAMPPROOFING OF MASONRY FOUNDATION WALL [SEE ALSO FIGURE R405.1(1)]
266	FIGURE R406.1(2) DAMPPROOFING OF CONCRETE FOUNDATION WALL [SEE ALSO FIGURE R405.1(1)] FIGURE R406.1(2) DAMPPROOFING OF CONCRETE FOUNDATION WALL [SEE ALSO FIGURE R405.1(1)]
267	FIGURE R406.2 METHODS OF WATERPROOFING BASEMENT WALLS [SEE ALSO FIGURES R405.1(1) AND R405.1(2) FOR TYPICAL DRAINAGE DETAILS] FIGURE R406.2 METHODS OF WATERPROOFING BASEMENT WALLS [SEE ALSO FIGURES R405.1(1) AND R405.1(2) FOR TYPICAL DRAINAGE DETAILS] SECTION R407- COLUMNS SECTION R407- COLUMNS
268	FIGURE R407.3(1) COLUMN ANCHORAGE FIGURE R407.3(1) COLUMN ANCHORAGE FIGURE R407.3(2) COLUMN ANCHORAGE FIGURE R407.3(2) COLUMN ANCHORAGE FIGURE R407.3(3) COLUMN ANCHORAGE FIGURE R407.3(3) COLUMN ANCHORAGE SECTION R408 – UNDER-FLOOR SPACE SECTION R408 – UNDER-FLOOR SPACE
269	FIGURE R408.1 CRAWL-SPACE VENTILATION FIGURE R408.1 CRAWL-SPACE VENTILATION
271	BIBLIOGRAPHY BIBLIOGRAPHY
273	CHAPTER 5: FLOORS CHAPTER 5: FLOORS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION R501 – GENERAL SECTION R501 – GENERAL SECTION R502 – WOOD FLOOR FRAMING SECTION R502 – WOOD FLOOR FRAMING
274	FIGURE R502.1 GRADE MAKE EXAMPLES FIGURE R502.1 GRADE MAKE EXAMPLES FIGURE R502.1.1 TREATED LUMBER GRADE MARK FIGURE R502.1.1 TREATED LUMBER GRADE MARK
276	FIGURE R502.2 FLOOR CONSTRUCTION FIGURE R502.2 FLOOR CONSTRUCTION
277	TABLE R502.2.2.1 FASTENER SPACING FOR A SOUTHERN PINE OR HEM-FIR DECK LEDGERAND A 2-INCH NOMINAL SOLID-SAWN SPRUCE-PINE-FIR BAND JOISTc, f, g TABLE R502.2.2.1 FASTENER SPACING FOR A SOUTHERN PINE OR HEM-FIR DECK LEDGERAND A 2-INCH NOMINAL SOLID-SAWN SPRUCE-PINE-FIR BAND JOISTc, f, g
278	FIGURE R502.2.2.3 DECK ATTACHMENT FOR LATERAL LOADS FIGURE R502.2.2.3 DECK ATTACHMENT FOR LATERAL LOADS
280	TABLE R502.3.1(1) FLOOR JOIST SPANS FOR COMMON LUMBER SPECIES (Residential sleeping areas, live load = 30 psf, L/Î” = 360)a TABLE R502.3.1(1) FLOOR JOIST SPANS FOR COMMON LUMBER SPECIES (Residential sleeping areas, live load = 30 psf, L/Î” = 360)a
281	TABLE R502.3.1(2) FLOOR JOIST SPANS FOR COMMON LUMBER SPECIES (Residential living areas, live load = 40 psf, L/Î” = 360)b TABLE R502.3.1(2) FLOOR JOIST SPANS FOR COMMON LUMBER SPECIES (Residential living areas, live load = 40 psf, L/Î” = 360)b
282	TABLE R502.3.3(1) CANTILEVER SPANS FOR FLOOR JOISTS SUPPORTING LIGHT-FRAME EXTERIOR BEARING WALL AND ROOF ONLYa, b, c, f, g, h (Floor Live Load 40 psf, Roof Live Load 20 psf) TABLE R502.3.3(1) CANTILEVER SPANS FOR FLOOR JOISTS SUPPORTING LIGHT-FRAME EXTERIOR BEARING WALL AND ROOF ONLYa, b, c, f, g, h (Floor Live Load 40 psf, Roof Live Load 20 psf)
283	TABLE R502.3.3(2) CANTILEVER SPANS FOR FLOOR JOISTS SUPPORTING EXTERIOR BALCONYa, b, e, f TABLE R502.3.3(2) CANTILEVER SPANS FOR FLOOR JOISTS SUPPORTING EXTERIOR BALCONYa, b, e, f
284	FIGURE R502.4(1) DOUBLE JOIST UNDER BEARING PARTITION FIGURE R502.4(1) DOUBLE JOIST UNDER BEARING PARTITION FIGURE R502.4(2) SPACED JOISTS UNDER BEARING PARTITION WITH BLOCKING AT PENETRATION FIGURE R502.4(2) SPACED JOISTS UNDER BEARING PARTITION WITH BLOCKING AT PENETRATION
285	TABLE R502.5(1) GIRDER SPANSa AND HEADER SPANSa FOR EXTERIOR BEARING WALLS (Maximum spans for Douglas fir-larch, hem-fir, southern pine and spruce-pine-firb and required number of jack studs) TABLE R502.5(1) GIRDER SPANSa AND HEADER SPANSa FOR EXTERIOR BEARING WALLS (Maximum spans for Douglas fir-larch, hem-fir, southern pine and spruce-pine-firb and required number of jack studs)
286	TABLE R502.5(1)—continued GIRDER SPANSa AND HEADER SPANSa FOR EXTERIOR BEARING WALLS (Maximum spans for Douglas fir-larch, hem-fir, southern pine and spruce-pine-firb and required number of jack studs) TABLE R502.5(1)—continued GIRDER SPANSa AND HEADER SPANSa FOR EXTERIOR BEARING WALLS (Maximum spans for Douglas fir-larch, hem-fir, southern pine and spruce-pine-firb and required number of jack studs) FIGURE R502.5(1) GIRDER SPAN-SPACING RELATIONSHIP FIGURE R502.5(1) GIRDER SPAN-SPACING RELATIONSHIP
287	TABLE R502.5(2) GIRDER SPANSa AND HEADER SPANSa FOR INTERIOR BEARING WALLS (Maximum spans for Douglas fir-larch, hem-fir, southern pine and spruce-pine-firb and required number of jack studs) TABLE R502.5(2) GIRDER SPANSa AND HEADER SPANSa FOR INTERIOR BEARING WALLS (Maximum spans for Douglas fir-larch, hem-fir, southern pine and spruce-pine-firb and required number of jack studs)
288	FIGURE R502.5(2) HEADER SPANS FOR EXTERIOR LOAD BEARING WALLS FIGURE R502.5(2) HEADER SPANS FOR EXTERIOR LOAD BEARING WALLS FIGURE R502.5(3) HEADERS SPANS FOR INTERIOR LOAD BEARING WALLS FIGURE R502.5(3) HEADERS SPANS FOR INTERIOR LOAD BEARING WALLS
289	FIGURE R502.6(1) FLOOR JOIST BEARING ON WOOD FIGURE R502.6(1) FLOOR JOIST BEARING ON WOOD FIGURE R502.6(2) FLOOR JOIST BEARING ON MASONRY FIGURE R502.6(2) FLOOR JOIST BEARING ON MASONRY
290	FIGURE R502.6(3) FLOOR JOIST BEARING ON RIBBON STRIP FIGURE R502.6(3) FLOOR JOIST BEARING ON RIBBON STRIP FIGURE R502.6(4) JOIST HANGER AT DOUBLE TOP PLATE FIGURE R502.6(4) JOIST HANGER AT DOUBLE TOP PLATE FIGURE R502.6.1 JOIST AT GIRDER FIGURE R502.6.1 JOIST AT GIRDER
291	FIGURE R502.6.2(1) JOIST HANGER AT GIRDER FIGURE R502.6.2(1) JOIST HANGER AT GIRDER FIGURE R502.6.2(2) LEDGER STRIPS AT BEAM OR GIRDER FIGURE R502.6.2(2) LEDGER STRIPS AT BEAM OR GIRDER
292	FIGURE R502.7 BLOCKING OF JOISTS FIGURE R502.7 BLOCKING OF JOISTS FIGURE R502.7.1 INTERMEDIATE LATERAL SUPPORT FIGURE R502.7.1 INTERMEDIATE LATERAL SUPPORT
294	FIGURE 502.8 CUTTING, NOTCHING AND DRILLING FIGURE 502.8 CUTTING, NOTCHING AND DRILLING
295	FIGURE R502.9 POSITIVE CONNECTION BETWEEN POSTS AND GIRDERS FIGURE R502.9 POSITIVE CONNECTION BETWEEN POSTS AND GIRDERS FIGURE R502.10(1) FLOOR FRAMING FOR MAXIMUM 4-FOOT OPENINGS FIGURE R502.10(1) FLOOR FRAMING FOR MAXIMUM 4-FOOT OPENINGS
296	FIGURE R502.10(2) FLOOR FRAMING FOR GREATER THAN 4-FOOT OPENINGS FIGURE R502.10(2) FLOOR FRAMING FOR GREATER THAN 4-FOOT OPENINGS FIGURE R502.10(3) HANGERS FOR JOIST-HEADER CONNECTION FIGURE R502.10(3) HANGERS FOR JOIST-HEADER CONNECTION
297	SECTION R503 – FLOOR SHEATHING SECTION R503 – FLOOR SHEATHING
298	TABLE R503.1 MINIMUM THICKNESS OF LUMBER FLOOR SHEATHING TABLE R503.1 MINIMUM THICKNESS OF LUMBER FLOOR SHEATHING FIGURE R503.1(1) FLOOR SHEATHING AS SUBFLOORING FIGURE R503.1(1) FLOOR SHEATHING AS SUBFLOORING FIGURE R503.1(2) SUBFLOOR (FLOOR SHEATHING) ORIENTATION FIGURE R503.1(2) SUBFLOOR (FLOOR SHEATHING) ORIENTATION
299	TABLE R503.2.1.1(1) ALLOWABLE SPANS AND LOADS FOR WOOD STRUCTURAL PANELS FOR ROOF AND SUBFLOOR SHEATHING AND COMBINATION SUBFLOOR UNDERLAYMENTa, b, c TABLE R503.2.1.1(1) ALLOWABLE SPANS AND LOADS FOR WOOD STRUCTURAL PANELS FOR ROOF AND SUBFLOOR SHEATHING AND COMBINATION SUBFLOOR UNDERLAYMENTa, b, c
300	FIGURE R503.1.1 SUBFLOOR (FLOOR SHEATHING ORIENTATION) FIGURE R503.1.1 SUBFLOOR (FLOOR SHEATHING ORIENTATION)
301	TABLE R503.2.1.1(2) ALLOWABLE SPANS FOR SANDED PLYWOOD COMBINATION SUBFLOOR UNDERLAYMENTa TABLE R503.2.1.1(2) ALLOWABLE SPANS FOR SANDED PLYWOOD COMBINATION SUBFLOOR UNDERLAYMENTa FIGURE R503.2.1 PLYWOOD GRADE MARK EXAMPLES FIGURE R503.2.1 PLYWOOD GRADE MARK EXAMPLES
302	FIGURE R503.2.2(1 )IDENTIFICATION OF PLYWOOD SUBFLOOR SPAN LIMITATIONS FIGURE R503.2.2(1 )IDENTIFICATION OF PLYWOOD SUBFLOOR SPAN LIMITATIONS FIGURE R503.2.2(2) COMBINATION SUBFLOOR UNDERLAYMENT ALTERNATIVES FIGURE R503.2.2(2) COMBINATION SUBFLOOR UNDERLAYMENT ALTERNATIVES
303	FIGURE R503.3.1 PARTICLEBOARD GRADE MARK EXA FIGURE R503.3.1 PARTICLEBOARD GRADE MARK EXA SECTION R504 – PRESSURE PRESERVATIVELY TREATED-WOODFLOORS (ON GROUND) SECTION R504 – PRESSURE PRESERVATIVELY TREATED-WOODFLOORS (ON GROUND)
304	SECTION R505 – STEEL FLOOR FRAMING SECTION R505 – STEEL FLOOR FRAMING
305	FIGURE R505.1.1 STEEL FRAMING APPLICABILITY LIMITS FIGURE R505.1.1 STEEL FRAMING APPLICABILITY LIMITS
306	FIGURE R505.1.2 IN-LINE FRAMING FIGURE R505.1.2 IN-LINE FRAMING TABLE R505.2(1) COLD-FORMED STEEL JOIST SIZES TABLE R505.2(1) COLD-FORMED STEEL JOIST SIZES
307	FIGURE R505.2(1) C-SHAPED SECTION FIGURE R505.2(1) C-SHAPED SECTION FIGURE R505.2(2) TRACK SECTION FIGURE R505.2(2) TRACK SECTION TABLE R505.2(2) MINIMUM THICKNESS OF COLD-FORMED STEEL MEMBERS TABLE R505.2(2) MINIMUM THICKNESS OF COLD-FORMED STEEL MEMBERS
308	TABLE R505.2.4 SCREW SUBSTITUTION FACTOR TABLE R505.2.4 SCREW SUBSTITUTION FACTOR
309	FIGURE R505.2.5.1 FLOOR JOIST WEB HOLES FIGURE R505.2.5.1 FLOOR JOIST WEB HOLES
310	FIGURE R505.2.5.3 WEB HOLE PATCH FIGURE R505.2.5.3 WEB HOLE PATCH TABLE R505.3.1(1) FLOOR TO FOUNDATION OR BEARING WALL CONNECTION REQUIREMENTS TABLE R505.3.1(1) FLOOR TO FOUNDATION OR BEARING WALL CONNECTION REQUIREMENTS
311	TABLE R505.3.1(2) FLOOR FASTENING SCHEDULEa TABLE R505.3.1(2) FLOOR FASTENING SCHEDULEa FIGURE R505.3.1(1) FLOOR TO EXTERIOR LOAD-BEARING WALL STUD CONNECTION FIGURE R505.3.1(1) FLOOR TO EXTERIOR LOAD-BEARING WALL STUD CONNECTION
312	FIGURE R505.3.1(2) FLOOR TO WOOD SILL CONNECTION FIGURE R505.3.1(2) FLOOR TO WOOD SILL CONNECTION FIGURE R505.3.1(3) FLOOR TO FOUNDATION CONNECTION FIGURE R505.3.1(3) FLOOR TO FOUNDATION CONNECTION
313	FIGURE R505.3.1(4) CANTILEVERED FLOOR TO FOUNDATION CONNECTION FIGURE R505.3.1(4) CANTILEVERED FLOOR TO FOUNDATION CONNECTION FIGURE R505.3.1(5) CANTILEVERED FLOOR TO WOOD SILL CONNECTION FIGURE R505.3.1(5) CANTILEVERED FLOOR TO WOOD SILL CONNECTION
314	FIGURE R505.3.1(6) CANTILEVERED FLOOR TO EXTERIOR LOAD-BEARING WALL CONNECTION FIGURE R505.3.1(6) CANTILEVERED FLOOR TO EXTERIOR LOAD-BEARING WALL CONNECTION FIGURE R505.3.1(7) CONTINUOUS SPAN JOIST SUPPORTED ON INTERIOR LOAD-BEARING WALL FIGURE R505.3.1(7) CONTINUOUS SPAN JOIST SUPPORTED ON INTERIOR LOAD-BEARING WALL
315	FIGURE R505.3.1(8) LAPPED JOISTS SUPPORTED ON INTERIOR LOAD-BEARING WALL FIGURE R505.3.1(8) LAPPED JOISTS SUPPORTED ON INTERIOR LOAD-BEARING WALL FIGURE R505.3.1(9) BEARING STIFFENERS FOR END JOISTS FIGURE R505.3.1(9) BEARING STIFFENERS FOR END JOISTS
316	TABLE R505.3.2(1) ALLOWABLE SPANS FOR COLD-FORMED STEEL JOISTS—SINGLE SPANSa, b, c, d 33 ksi STEEL TABLE R505.3.2(1) ALLOWABLE SPANS FOR COLD-FORMED STEEL JOISTS—SINGLE SPANSa, b, c, d 33 ksi STEEL
317	TABLE R505.3.2(2) ALLOWABLE SPANS FOR COLD-FORMED STEEL JOISTS—MULTIPLE SPANSa, b, c, d, e, f 33 ksi STEEL TABLE R505.3.2(2) ALLOWABLE SPANS FOR COLD-FORMED STEEL JOISTS—MULTIPLE SPANSa, b, c, d, e, f 33 ksi STEEL FIGURE R505.3.2 SPAN ARRANGEMENT FOR FLOOR JOIST CONTINUOUS OVER SUPPORT FIGURE R505.3.2 SPAN ARRANGEMENT FOR FLOOR JOIST CONTINUOUS OVER SUPPORT
318	TABLE R505.3.2(3) ALLOWABLE SPANS FOR COLD-FORMED STEEL JOISTS—MULTIPLE SPANSa, b, c, d, e, f 50 ksi STEEL TABLE R505.3.2(3) ALLOWABLE SPANS FOR COLD-FORMED STEEL JOISTS—MULTIPLE SPANSa, b, c, d, e, f 50 ksi STEEL
319	FIGURE R505.3.3.2(1) JOIST BLOCKING (SOLID) FIGURE R505.3.3.2(1) JOIST BLOCKING (SOLID) FIGURE R505.3.3.2(2) JOIST BLOCKING (STRAP FIGURE R505.3.3.2(2) JOIST BLOCKING (STRAP
320	FIGURE R505.3.4(1) BEARING STIFFENERS UNDER JAMB STUDS FIGURE R505.3.4(1) BEARING STIFFENERS UNDER JAMB STUDS
321	FIGURE R505.3.4(2) BEARING STIFFENER FIGURE R505.3.4(2) BEARING STIFFENER TABLE R505.3.4(1) CLIP ANGLE BEARING STIFFENERS TABLE R505.3.4(1) CLIP ANGLE BEARING STIFFENERS
322	TABLE R505.3.4(2) CLIP ANGLE BEARING STIFFENERS TABLE R505.3.4(2) CLIP ANGLE BEARING STIFFENERS TABLE R505.3.4(3) CLIP ANGLE BEARING STIFFENERS TABLE R505.3.4(3) CLIP ANGLE BEARING STIFFENERS
323	TABLE R505.3.4(4) CLIP ANGLE BEARING STIFFENERS TABLE R505.3.4(4) CLIP ANGLE BEARING STIFFENERS
324	FIGURE R505.3.7 TRACK SPLICE FIGURE R505.3.7 TRACK SPLICE FIGURE R505.3.8(1) COLD-FORMED STEEL FLOOR CONSTRUCTION: 6-FOOT FLOOR OPENING FIGURE R505.3.8(1) COLD-FORMED STEEL FLOOR CONSTRUCTION: 6-FOOT FLOOR OPENING
325	FIGURE R505.3.8(2) COLD-FORMED STEEL FLOOR CONSTRUCTION: 8-FOOT FLOOR OPENING FIGURE R505.3.8(2) COLD-FORMED STEEL FLOOR CONSTRUCTION: 8-FOOT FLOOR OPENING FIGURE R505.3.8(3) GOLD-FORMED STEEL FLOOR CONSTRUCTION: FLOOR HEADER TO TRIMMER CONNECTION—6-FOOT OPENING FIGURE R505.3.8(3) GOLD-FORMED STEEL FLOOR CONSTRUCTION: FLOOR HEADER TO TRIMMER CONNECTION—6-FOOT OPENING
326	FIGURE R505.3.8(4) COLD-FORMED STEEL FLOOR CONSTRUCTION: FLOOR HEADER TO TRIMMER CONNECTION—8-FOOT OPENING FIGURE R505.3.8(4) COLD-FORMED STEEL FLOOR CONSTRUCTION: FLOOR HEADER TO TRIMMER CONNECTION—8-FOOT OPENING SECTION R506 – CONCRETE FLOORS (ON GROUND) SECTION R506 – CONCRETE FLOORS (ON GROUND) FIGURE R506.1 CONCRETE SLAB-ON-GROUND REQUIREMENTS FIGURE R506.1 CONCRETE SLAB-ON-GROUND REQUIREMENTS
327	BIBLIOGRAPHY BIBLIOGRAPHY
329	CHAPTER 6: WALL CONSTRUCTION CHAPTER 6: WALL CONSTRUCTION GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION R601 – GENERAL SECTION R601 – GENERAL
330	FIGURE R601.3 TYPICAL WOOD STUD WALL CONSTRUCTION FIGURE R601.3 TYPICAL WOOD STUD WALL CONSTRUCTION
331	TABLE R601.3.1 CLASS III VAPOR RETARDERS TABLE R601.3.1 CLASS III VAPOR RETARDERS SECTION R602 – WOOD WALL FRAMING SECTION R602 – WOOD WALL FRAMING
332	FIGURE R602.1 GRADE STAMP EXAMPLE FOR DIMENSIONAL LUMBER FIGURE R602.1 GRADE STAMP EXAMPLE FOR DIMENSIONAL LUMBER FIGURE R602.1.1 END-JOINTED LUMBER—FINGER JOINT FIGURE R602.1.1 END-JOINTED LUMBER—FINGER JOINT
334	TABLE R602.3(1) FASTENER SCHEDULE FOR STRUCTURAL MEMBERS TABLE R602.3(1) FASTENER SCHEDULE FOR STRUCTURAL MEMBERS
335	TABLE R602.3(1)—continued FASTENER SCHEDULE FOR STRUCTURAL MEMBERS TABLE R602.3(1)—continued FASTENER SCHEDULE FOR STRUCTURAL MEMBERS
336	TABLE R602.3(2) ALTERNATE ATTACHMENTS TABLE R602.3(2) ALTERNATE ATTACHMENTS
337	TABLE R602.3(3) REQUIREMENTS FOR WOOD STRUCTURAL PANEL WALL SHEATHING USED TO RESIST WIND PRESSURES TABLE R602.3(3) REQUIREMENTS FOR WOOD STRUCTURAL PANEL WALL SHEATHING USED TO RESIST WIND PRESSURES
338	TABLE R602.3(4) ALLOWABLE SPANS FOR PARTICLEBOARD WALL SHEATHING TABLE R602.3(4) ALLOWABLE SPANS FOR PARTICLEBOARD WALL SHEATHING TABLE R602.3(5) SIZE, HEIGHT AND SPACING OF WOOD STUDS TABLE R602.3(5) SIZE, HEIGHT AND SPACING OF WOOD STUDS
339	FIGURE R602.3(1) TYPICAL WALL, FLOOR AND ROOF FRAMING FIGURE R602.3(1) TYPICAL WALL, FLOOR AND ROOF FRAMING
340	FIGURE R602.3(2) FRAMING DETAILS FIGURE R602.3(2) FRAMING DETAILS
341	TABLE R602.3.1 MAXIMUM ALLOWABLE LENGTH OF WOOD WALL STUDS EXPOSED TO WIND SPEEDS OF 100 mph OR LESS IN SEISMIC DESIGN CATEGORIES A, B, C, D0, D1 and D2b, c TABLE R602.3.1 MAXIMUM ALLOWABLE LENGTH OF WOOD WALL STUDS EXPOSED TO WIND SPEEDS OF 100 mph OR LESS IN SEISMIC DESIGN CATEGORIES A, B, C, D0, D1 and D2b, c
342	TABLE R602.3.1—continued MAXIMUM ALLOWABLE LENGTH OF WOOD WALL STUDS EXPOSED TO WIND SPEEDS OF 100 mph OR LESSIN SEISMIC DESIGN CATEGORIES A, B, C, D0, D1 and D2 TABLE R602.3.1—continued MAXIMUM ALLOWABLE LENGTH OF WOOD WALL STUDS EXPOSED TO WIND SPEEDS OF 100 mph OR LESSIN SEISMIC DESIGN CATEGORIES A, B, C, D0, D1 and D2
343	FIGURE R602.3.2 SINGLE TOP-PLATE SPLICE FIGURE R602.3.2 SINGLE TOP-PLATE SPLICE
344	FIGURE R602.3.3(1) TOP PLATE WITH 16-INCH STUD SPACING FIGURE R602.3.3(1) TOP PLATE WITH 16-INCH STUD SPACING FIGURE R602.3.3(2) TOP PLATE WITH 24-INCH STUD SPACING FIGURE R602.3.3(2) TOP PLATE WITH 24-INCH STUD SPACING
345	FIGURE R602.3.3(3) TOP PLATE WITH 24-INCH STUD SPACING AND BEARING POINT LIMITATIONS FIGURE R602.3.3(3) TOP PLATE WITH 24-INCH STUD SPACING AND BEARING POINT LIMITATIONS FIGURE R602.3.3(4) BLOCKED TOP PLATE WITH 24-INCH STUD S FIGURE R602.3.3(4) BLOCKED TOP PLATE WITH 24-INCH STUD S
346	FIGURE R602.6(1) NOTCHING AND BORED HOLE LIMITATIONS FOR EXTERIOR WALLS AND BEARING WALLS FIGURE R602.6(1) NOTCHING AND BORED HOLE LIMITATIONS FOR EXTERIOR WALLS AND BEARING WALLS
347	FIGURE R602.6(2) NOTCHING AND BORED HOLE LIMITATIONS FOR INTERIOR NONBEARING WALLS FIGURE R602.6(2) NOTCHING AND BORED HOLE LIMITATIONS FOR INTERIOR NONBEARING WALLS
348	FIGURE R602.6.1 TOP PLATE FRAMING TO ACCOMMODATE PIP FIGURE R602.6.1 TOP PLATE FRAMING TO ACCOMMODATE PIP FIGURE R602.7 HEADER DETAIL FIGURE R602.7 HEADER DETAIL
349	TABLE R602.7.2 MAXIMUM SPANS FOR WOOD STRUCTURAL PANEL BOX HEADERSa TABLE R602.7.2 MAXIMUM SPANS FOR WOOD STRUCTURAL PANEL BOX HEADERSa FIGURE R602.7.2 TYPICAL WOOD STRUCTURAL PANEL BOX HEADER CONSTRUCTION FIGURE R602.7.2 TYPICAL WOOD STRUCTURAL PANEL BOX HEADER CONSTRUCTION
351	FIGURE R602.10 CRITICAL PARTS OF THE LATERAL LOAD PATH FIGURE R602.10 CRITICAL PARTS OF THE LATERAL LOAD PATH
352	FIGURE R602.10.1(1) WALL BRACING TERMINOLOGY FIGURE R602.10.1(1) WALL BRACING TERMINOLOGY
353	FIGURE R602.10.1(2) ACTUAL WALL LINE/PROJECTION FIGURE R602.10.1(2) ACTUAL WALL LINE/PROJECTION FIGURE R602.10.1(3) EFFECTIVE (IMAGINARY) BRACED WALL LINE FIGURE R602.10.1(3) EFFECTIVE (IMAGINARY) BRACED WALL LINE
356	FIGURE R602.10.1.2(1) WALL BRACING—WIND LOADS FIGURE R602.10.1.2(1) WALL BRACING—WIND LOADS
357	FIGURE R602.10.1.2(2) WALL BRACING—SEISMIC LOADS FIGURE R602.10.1.2(2) WALL BRACING—SEISMIC LOADS FIGURE R602.10.1.2(3) BASIS FOR WIND BRACING TABLE FIGURE R602.10.1.2(3) BASIS FOR WIND BRACING TABLE
358	FIGURE R602.10.1.2(4) EAVE-TO-RIDGE HEIGHT FIGURE R602.10.1.2(4) EAVE-TO-RIDGE HEIGHT
359	FIGURE R602.10.1.2(5) BRACED WALL LINE SPACING FIGURE R602.10.1.2(5) BRACED WALL LINE SPACING
360	TABLE R602.10.1.2(1)a, b, c, d, e BRACING REQUIREMENTS BASED ON WIND SPEED (AS A FUNCTION OF BRACED WALL LINE SPACING) TABLE R602.10.1.2(1)a, b, c, d, e BRACING REQUIREMENTS BASED ON WIND SPEED (AS A FUNCTION OF BRACED WALL LINE SPACING)
361	TABLE R602.10.1.2(1)a, b, c, d, e—continued BRACING REQUIREMENTS BASED ON WIND SPEED TABLE R602.10.1.2(1)a, b, c, d, e—continued BRACING REQUIREMENTS BASED ON WIND SPEED
362	TABLE R602.10.1.2(1)a, b, c, d, e—continued BRACING REQUIREMENTS BASED ON WIND SPEED TABLE R602.10.1.2(1)a, b, c, d, e—continued BRACING REQUIREMENTS BASED ON WIND SPEED
363	FIGURE R602.10.1.2(6) BASIS FOR SEISMIC BRACING TABLE FIGURE R602.10.1.2(6) BASIS FOR SEISMIC BRACING TABLE
364	TABLE R602.10.1.2(2)a, b, c BRACING REQUIREMENTS BASED ON SEISMIC DESIGN CATEGORY (AS A FUNCTION OF BRACED WALL LINE LENGTH) TABLE R602.10.1.2(2)a, b, c BRACING REQUIREMENTS BASED ON SEISMIC DESIGN CATEGORY (AS A FUNCTION OF BRACED WALL LINE LENGTH)
365	TABLE R602.10.1.2(2)a, b, c—continued BRACING REQUIREMENTS BASED ON SEISMIC DESIGN CATEGORY(AS A FUNCTION OF BRACED WALL LINE LENGTH) TABLE R602.10.1.2(2)a, b, c—continued BRACING REQUIREMENTS BASED ON SEISMIC DESIGN CATEGORY(AS A FUNCTION OF BRACED WALL LINE LENGTH)
366	TABLE R602.10.1.2(3) ADJUSTMENT FACTORS TO THE LENGTH OF REQUIRED SEISMIC WALL BRACING TABLE R602.10.1.2(3) ADJUSTMENT FACTORS TO THE LENGTH OF REQUIRED SEISMIC WALL BRACING
368	FIGURE R602.10.1.3 ANGLED CORNERS FIGURE R602.10.1.3 ANGLED CORNERS
369	FIGURE R602.10.1.3(1) INSUFFICIENT ROOM IN ANGLED PORTION OR WALL TO PERMIT BRACING FIGURE R602.10.1.3(1) INSUFFICIENT ROOM IN ANGLED PORTION OR WALL TO PERMIT BRACING FIGURE R602.10.1.3(2) ANGLED PORTION OF WALL GREATER THAN 8 FEET FIGURE R602.10.1.3(2) ANGLED PORTION OF WALL GREATER THAN 8 FEET
370	FIGURE R602.10.1.4(1) BRACED WALL PANELS AND BRACED WALL LINES FIGURE R602.10.1.4(1) BRACED WALL PANELS AND BRACED WALL LINES
371	FIGURE R602.10.1.4(2) BRACED WALL PANEL END DISTANCE REQUIREMENTS (SDC A, B AND C) FIGURE R602.10.1.4(2) BRACED WALL PANEL END DISTANCE REQUIREMENTS (SDC A, B AND C) FIGURE R602.10.1.4(3) OFFSETS PERMITTED FOR BRACED WALL LINES FIGURE R602.10.1.4(3) OFFSETS PERMITTED FOR BRACED WALL LINES
372	FIGURE R602.10.1.4(4) BRACED WALL LINE SPACING FIGURE R602.10.1.4(4) BRACED WALL LINE SPACING FIGURE R602.10.1.4(1) EFFECTIVE (IMAGINARY) BRACED WALL LINE FIGURE R602.10.1.4(1) EFFECTIVE (IMAGINARY) BRACED WALL LINE
373	FIGURE R602.10.1.4.1 BRACED WALL PANELS AT ENDS OF BRACED WALL LINES IN SEISMIC DESIGN CATEGORIES D0, D1 AND D2 FIGURE R602.10.1.4.1 BRACED WALL PANELS AT ENDS OF BRACED WALL LINES IN SEISMIC DESIGN CATEGORIES D0, D1 AND D2 TABLE R602.10.1.5 ADJUSTMENTS OF BRACING LENGTH FOR BRACED WALL LINE SPACING GREATER THAN 25 FEET TABLE R602.10.1.5 ADJUSTMENTS OF BRACING LENGTH FOR BRACED WALL LINE SPACING GREATER THAN 25 FEET
375	TABLE R602.10.2 INTERMITTENT BRACING METHODS TABLE R602.10.2 INTERMITTENT BRACING METHODS
377	TABLE R602.10.3 EFFECTIVE LENGTHS FOR BRACED WALL PANELS LESS THAN 48 INCHES IN ACTUAL LENGTH (BRACE METHODS DWB, WSP, SFB, PBS, PCP AND HPSa) TABLE R602.10.3 EFFECTIVE LENGTHS FOR BRACED WALL PANELS LESS THAN 48 INCHES IN ACTUAL LENGTH (BRACE METHODS DWB, WSP, SFB, PBS, PCP AND HPSa) TABLE R602.10.3.1 MINIMUM LENGTH REQUIREMENTS FOR BRACED WALL PANELS TABLE R602.10.3.1 MINIMUM LENGTH REQUIREMENTS FOR BRACED WALL PANELS
378	TABLE R602.10.3.2 MINIMUM LENGTH REQUIREMENTS AND HOLD-DOWN FORCES FOR METHOD ABW BRACED WALL PANELS TABLE R602.10.3.2 MINIMUM LENGTH REQUIREMENTS AND HOLD-DOWN FORCES FOR METHOD ABW BRACED WALL PANELS FIGURE R602.10.3.2 ALTERNATE BRACED WALL PANEL FIGURE R602.10.3.2 ALTERNATE BRACED WALL PANEL
379	FIGURE R602.10.3.3 METHOD PFH: PORTAL FRAME WITH HOLD-DOWNS FIGURE R602.10.3.3 METHOD PFH: PORTAL FRAME WITH HOLD-DOWNS
380	FIGURE R602.10.3.4 METHOD PFG PORTAL FRAME AT GARAGE DOOR OPENINGS IN SEISMIC DESIGN CATEGORIES A, B AND C FIGURE R602.10.3.4 METHOD PFG PORTAL FRAME AT GARAGE DOOR OPENINGS IN SEISMIC DESIGN CATEGORIES A, B AND C
381	TABLE R602.10.4.1 CONTINUOUS SHEATHING METHODS TABLE R602.10.4.1 CONTINUOUS SHEATHING METHODS
383	FIGURE R602.10.4.1.1 METHOD CS-PF: CONTINUOUS PORTAL FRAME PANEL CONSTRUCTION FIGURE R602.10.4.1.1 METHOD CS-PF: CONTINUOUS PORTAL FRAME PANEL CONSTRUCTION
384	TABLE R602.10.4.1.1 TENSION STRAP CAPACITY REQUIRED FOR RESISTING WIND PRESSURES PERPENDICULAR TO 6:1 ASPECT RATIO WALLSa,b TABLE R602.10.4.1.1 TENSION STRAP CAPACITY REQUIRED FOR RESISTING WIND PRESSURES PERPENDICULAR TO 6:1 ASPECT RATIO WALLSa,b
385	FIGURE R602.10.4.2 BRACED WALL PANELS WITH CONTINUOUS SHEATHING FIGURE R602.10.4.2 BRACED WALL PANELS WITH CONTINUOUS SHEATHING TABLE R602.10.4.2 LENGTH REQUIREMENTS FOR BRACED WALL PANELS WITH CONTINUOUS SHEATHINGa (inches) TABLE R602.10.4.2 LENGTH REQUIREMENTS FOR BRACED WALL PANELS WITH CONTINUOUS SHEATHINGa (inches)
387	FIGURE R602.10.4.4(1) TYPICAL EXTERIOR CORNER FRAMING FOR CONTINUOUS SHEATHING FIGURE R602.10.4.4(1) TYPICAL EXTERIOR CORNER FRAMING FOR CONTINUOUS SHEATHING
388	FIGURE R602.10.4.4(2) BRACED WALL LINE WITH CONTINUOUS SHEATHING WITH CORNER RETURN PANEL FIGURE R602.10.4.4(2) BRACED WALL LINE WITH CONTINUOUS SHEATHING WITH CORNER RETURN PANEL FIGURE R602.10.4.4(3) BRACED WALL LINE WITH CONTINUOUS SHEATING WITHOUT CORNER RETURN PANEL FIGURE R602.10.4.4(3) BRACED WALL LINE WITH CONTINUOUS SHEATING WITHOUT CORNER RETURN PANEL
389	FIGURE R602.10.4.4(4) BRACED WALL LINE WITH CONTINUOUS SHEATHING FIRST BRACED WALL PANEL AWAY FROM END OF WALL LINE WITHOUT TIE DOWN FIGURE R602.10.4.4(4) BRACED WALL LINE WITH CONTINUOUS SHEATHING FIRST BRACED WALL PANEL AWAY FROM END OF WALL LINE WITHOUT TIE DOWN FIGURE R602.10.4.4(5) BRACED WALL LINE WITH CONTINUOUS SHEATHING—FIRST BRACED WALL PANEL AWAY FROM END OF WALL LINE WITH HOLD-DOWN FIGURE R602.10.4.4(5) BRACED WALL LINE WITH CONTINUOUS SHEATHING—FIRST BRACED WALL PANEL AWAY FROM END OF WALL LINE WITH HOLD-DOWN
390	TABLE R602.10.5.2 MINIMUM LENGTH REQUIREMENTS FOR STRUCTURAL FIBERBOARD BRACED WALL PANELS IN A CONTINUOUSLY-SHEATHED WALLa TABLE R602.10.5.2 MINIMUM LENGTH REQUIREMENTS FOR STRUCTURAL FIBERBOARD BRACED WALL PANELS IN A CONTINUOUSLY-SHEATHED WALLa
392	FIGURE R602.10.6(1) BRACED WALL PANEL CONNECTION WHEN PERPENDICULAR TO FLOOR/CEILING FRAMING FIGURE R602.10.6(1) BRACED WALL PANEL CONNECTION WHEN PERPENDICULAR TO FLOOR/CEILING FRAMING FIGURE R602.10.6(2) BRACED WALL PANEL CONNECTION WHEN PARALLEL TO FLOOR/CEILING FRAMING FIGURE R602.10.6(2) BRACED WALL PANEL CONNECTION WHEN PARALLEL TO FLOOR/CEILING FRAMING
393	FIGURE R602.10.6.2(1) BRACED WALL PANEL CONNECTION TO PERPENDICULAR RAFTERS FIGURE R602.10.6.2(1) BRACED WALL PANEL CONNECTION TO PERPENDICULAR RAFTERS FIGURE R602.10.6.2(2) BRACED WALL PANEL CONNECTION OPTION TO PERPENDICULAR RAFTERS OR ROOF TRUSSES FIGURE R602.10.6.2(2) BRACED WALL PANEL CONNECTION OPTION TO PERPENDICULAR RAFTERS OR ROOF TRUSSES
394	FIGURE R602.10.6.2(3) BRACED WALL PANEL CONNECTION OPTION TO PERPENDICULAR RAFTERS OR ROOF TRUSSES FIGURE R602.10.6.2(3) BRACED WALL PANEL CONNECTION OPTION TO PERPENDICULAR RAFTERS OR ROOF TRUSSES TABLE R602.10.6.2 CONNECTION AND BLOCKING REQUIREMENTS BETWEEN BRACED WALL PANELS AND ROOF FRAMING TABLE R602.10.6.2 CONNECTION AND BLOCKING REQUIREMENTS BETWEEN BRACED WALL PANELS AND ROOF FRAMING
395	FIGURE R602.10.6.2 DISTANCE FROM TOP PLATE TO BOTTOM OF ROOF SHEATHING FOR PROVIDING CONNECTION REQUIREMENTS AND BLOCKING PER TABLE R602.10.6.2 FIGURE R602.10.6.2 DISTANCE FROM TOP PLATE TO BOTTOM OF ROOF SHEATHING FOR PROVIDING CONNECTION REQUIREMENTS AND BLOCKING PER TABLE R602.10.6.2
396	FIGURE R602.10.7 MASONRY STEM WALLS SUPPORTING BRACED WALL PANELS FIGURE R602.10.7 MASONRY STEM WALLS SUPPORTING BRACED WALL PANELS
397	FIGURE R602.10.7.1(1) SEISMIC DESIGN CATEGORY D2 INTERIOR BRACED WALL SUPPORT FIGURE R602.10.7.1(1) SEISMIC DESIGN CATEGORY D2 INTERIOR BRACED WALL SUPPORT
398	FIGURE R602.10.7.1(2) SEISMIC DESIGN CATEGORY D2 INTERIOR BRACED WALL SUPPORT FIGURE R602.10.7.1(2) SEISMIC DESIGN CATEGORY D2 INTERIOR BRACED WALL SUPPORT
400	FIGURE R602.11.2 STEPPED FOUNDATION CONSTRUCTION FIGURE R602.11.2 STEPPED FOUNDATION CONSTRUCTION
401	FIGURE R602.11.2(1) CRIPPLE WALL TOP PLATE EXTENDED 4 FEET OVER THE FOUNDATION FIGURE R602.11.2(1) CRIPPLE WALL TOP PLATE EXTENDED 4 FEET OVER THE FOUNDATION
402	TABLE R602.12(1) STONE OR MASONRY VENEER WALL BRACING REQUIREMENTS, WOOD OR STEEL FRAMING, SEISMIC DESIGN CATEGORIES A, B and C TABLE R602.12(1) STONE OR MASONRY VENEER WALL BRACING REQUIREMENTS, WOOD OR STEEL FRAMING, SEISMIC DESIGN CATEGORIES A, B and C TABLE R602.12(2) STONE OR MASONRY VENEER WALL BRACING REQUIREMENTS, ONE- AND TWO-FAMILY DETACHED DWELLINGS, SEISMIC DESIGN CATEGORIES D0, D1 and D TABLE R602.12(2) STONE OR MASONRY VENEER WALL BRACING REQUIREMENTS, ONE- AND TWO-FAMILY DETACHED DWELLINGS, SEISMIC DESIGN CATEGORIES D0, D1 and D
403	FIGURE R602.12 HOLD DOWNS AT EXTERIOR AND INTERIOR BRACED WALL PANELS FIGURE R602.12 HOLD DOWNS AT EXTERIOR AND INTERIOR BRACED WALL PANELS
404	SECTION R603 – STEEL WALL FRAMING SECTION R603 – STEEL WALL FRAMING
405	FIGURE R603.1.2 IN-LINE FRAMING FIGURE R603.1.2 IN-LINE FRAMING
406	TABLE R603.2(1) LOAD-BEARING COLD-FORMED STEEL STUD SIZES TABLE R603.2(1) LOAD-BEARING COLD-FORMED STEEL STUD SIZES TABLE R603.2(2) MINIMUM THICKNESS OF COLD-FORMED STEEL MEMBERS TABLE R603.2(2) MINIMUM THICKNESS OF COLD-FORMED STEEL MEMBERS
407	FIGURE R603.2(1) C-SHAPED SECTION FIGURE R603.2(1) C-SHAPED SECTION FIGURE R603.2(2) TRACK SECTION FIGURE R603.2(2) TRACK SECTION TABLE R603.2.4 SCREW SUBSTITUTION FACTOR TABLE R603.2.4 SCREW SUBSTITUTION FACTOR
408	FIGURE R603.2.5.1 WEB HOLES FIGURE R603.2.5.1 WEB HOLES
409	FIGURE R603.2.5.3 STUD WEB HOLE PATCH FIGURE R603.2.5.3 STUD WEB HOLE PATCH
410	TABLE R603.3.1 WALL TO FOUNDATION OR FLOOR CONNECTION REQUIREMENTSa,b TABLE R603.3.1 WALL TO FOUNDATION OR FLOOR CONNECTION REQUIREMENTSa,b
411	FIGURE R603.3.1(1) WALL TO FLOOR CONNECTION FIGURE R603.3.1(1) WALL TO FLOOR CONNECTION FIGURE R603.3.1(2) WALL TO FOUNDATION CONNECTION FIGURE R603.3.1(2) WALL TO FOUNDATION CONNECTION
412	FIGURE R603.3.1(3) WALL TO WOOD SILL CONNECTION FIGURE R603.3.1(3) WALL TO WOOD SILL CONNECTION TABLE R603.3.1.1(1) GABLE ENDWALL TO FLOOR CONNECTION REQUIREMENTSa,b,c TABLE R603.3.1.1(1) GABLE ENDWALL TO FLOOR CONNECTION REQUIREMENTSa,b,c
413	TABLE R603.3.1.1(2) GABLE END WALL BOTTOM TRACK TO FOUNDATION CONNECTION REQUIREMENTSa,b,c TABLE R603.3.1.1(2) GABLE END WALL BOTTOM TRACK TO FOUNDATION CONNECTION REQUIREMENTSa,b,c TABLE R603.3.2(1) WALL FASTENING SCHEDULEa TABLE R603.3.2(1) WALL FASTENING SCHEDULEa
414	FIGURE R603.3.3(1) STUD BRACING WITH STRAPPING ONLY FIGURE R603.3.3(1) STUD BRACING WITH STRAPPING ONLY FIGURE R603.3.3(2) STUD BRACING WITH STRAPPING AND SHEATHING MATERIAL FIGURE R603.3.3(2) STUD BRACING WITH STRAPPING AND SHEATHING MATERIAL
415	FIGURE R603.3.5 TRACK SPLICE FIGURE R603.3.5 TRACK SPLICE FIGURE R603.4 CORNER FRAMING FIGURE R603.4 CORNER FRAMING
416	TABLE R603.3.2(2) 24-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa, b, c 33 ksi STEEL TABLE R603.3.2(2) 24-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa, b, c 33 ksi STEEL
417	TABLE R603.3.2(3) 24-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STEEL TABLE R603.3.2(3) 24-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STEEL
418	TABLE R603.3.2(4) 28-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 33 ksi STEEL TABLE R603.3.2(4) 28-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 33 ksi STEEL
419	TABLE R603.3.2(5) 28-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STEEL TABLE R603.3.2(5) 28-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STEEL
420	TABLE R603.3.2(6) 32-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 33 ksi STEEL TABLE R603.3.2(6) 32-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 33 ksi STEEL
421	TABLE R603.3.2(7) 32-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STE TABLE R603.3.2(7) 32-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STE
422	TABLE R603.3.2(8) 36-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 33 ksi STEEL TABLE R603.3.2(8) 36-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 33 ksi STEEL
423	TABLE R603.3.2(9) 36-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STEEL TABLE R603.3.2(9) 36-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STEEL
424	TABLE R603.3.2(10) 40-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 33 ksi STEEL TABLE R603.3.2(10) 40-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 33 ksi STEEL
425	TABLE R603.3.2(11) 40-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STEEL TABLE R603.3.2(11) 40-FOOT-WIDE BUILDING SUPPORTING ROOF AND CEILING ONLYa,b,c 50 ksi STEEL
426	TABLE R603.3.2(12) 24-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(12) 24-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL
427	TABLE R603.3.2(13) 24-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(13) 24-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL
428	TABLE R603.3.2(14) 28-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(14) 28-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL
429	TABLE R603.3.2(15) 28-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(15) 28-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL
430	TABLE R603.3.2(16) 32-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(16) 32-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL
431	TABLE R603.3.2(17) 32-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(17) 32-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL
432	TABLE R603.3.2(18) 36-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(18) 36-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL
433	TABLE R603.3.2(19) 36-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(19) 36-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL
434	TABLE R603.3.2(20) 40-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(20) 40-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 33 ksi STEEL
435	TABLE R603.3.2(21) 40-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(21) 40-FOOT-WIDE BUILDING SUPPORTING ONE FLOOR, ROOF AND CEILINGa,b,c 50 ksi STEEL
436	TABLE R603.3.2(22) 24-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(22) 24-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL
437	TABLE R603.3.2(23) 24-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(23) 24-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL
438	TABLE R603.3.2(24) 28-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(24) 28-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL
439	TABLE R603.3.2(25) 28-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(25) 28-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL
440	TABLE R603.3.2(26) 32-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(26) 32-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL
441	TABLE R603.3.2(27) 32-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(27) 32-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL
442	TABLE R603.3.2(28) 36-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(28) 36-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL
443	TABLE R603.3.2(29) 36-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(29) 36-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL
444	TABLE R603.3.2(30) 40-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL TABLE R603.3.2(30) 40-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 33 ksi STEEL
445	TABLE R603.3.2(31) 40-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL TABLE R603.3.2(31) 40-FOOT-WIDE BUILDING SUPPORTING TWO FLOORS, ROOF AND CEILINGa,b,c 50 ksi STEEL
446	TABLE R603.3.2.1(1) ALL BUILDING WIDTHS GABLE ENDWALLS 8, 9 OR 10 FEET IN HEIGHTa,b,c 33 ksi STEEL TABLE R603.3.2.1(1) ALL BUILDING WIDTHS GABLE ENDWALLS 8, 9 OR 10 FEET IN HEIGHTa,b,c 33 ksi STEEL
447	TABLE R603.3.2.1(2) ALL BUILDING WIDTHS GABLE ENDWALLS 8, 9 OR 10 FEET IN HEIGHTa,b,c 50 ksi STEEL TABLE R603.3.2.1(2) ALL BUILDING WIDTHS GABLE ENDWALLS 8, 9 OR 10 FEET IN HEIGHTa,b,c 50 ksi STEEL
448	TABLE R603.3.2.1(3) ALL BUILDING WIDTHS GABLE ENDWALLS OVER 10 FEET IN HEIGHTa,b,c 33 ksi STEEL TABLE R603.3.2.1(3) ALL BUILDING WIDTHS GABLE ENDWALLS OVER 10 FEET IN HEIGHTa,b,c 33 ksi STEEL
449	TABLE R603.3.2.1(4) ALL BUILDING WIDTHS GABLE ENDWALLS OVER 10 FEET IN HEIGHTa,b,c 50 ksi STEEL TABLE R603.3.2.1(4) ALL BUILDING WIDTHS GABLE ENDWALLS OVER 10 FEET IN HEIGHTa,b,c 50 ksi STEEL
451	FIGURE R603.6(1) BOX BEAM HEADER FIGURE R603.6(1) BOX BEAM HEADER FIGURE 603.6(2) BACK-TO-BACK HEADER FIGURE 603.6(2) BACK-TO-BACK HEADER
452	FIGURE R603.6.1(1) BOX BEAM HEADER IN GABLE ENDWALL FIGURE R603.6.1(1) BOX BEAM HEADER IN GABLE ENDWALL FIGURE R603.6.1(2) BACK-TO-BACK HEADER IN GABLE ENDWALL FIGURE R603.6.1(2) BACK-TO-BACK HEADER IN GABLE ENDWALL
453	TABLE R603.6(1) BOX-BEAM HEADER SPANS Headers Supporting Roof and Ceiling Only (33 ksi steel)a, b TABLE R603.6(1) BOX-BEAM HEADER SPANS Headers Supporting Roof and Ceiling Only (33 ksi steel)a, b
454	TABLE R603.6(2) BOX-BEAM HEADER SPANS Headers Supporting Roof and Ceiling Only (50 ksi steel)a, b TABLE R603.6(2) BOX-BEAM HEADER SPANS Headers Supporting Roof and Ceiling Only (50 ksi steel)a, b
455	TABLE R603.6(3) BOX-BEAM HEADER SPANS Headers Supporting Roof and Ceiling Only (33 ksi steel)a, b TABLE R603.6(3) BOX-BEAM HEADER SPANS Headers Supporting Roof and Ceiling Only (33 ksi steel)a, b
456	TABLE R603.6(4) BOX-BEAM HEADER SPANS Headers Supporting Roof and Ceiling Only (50 ksi steel)a, b TABLE R603.6(4) BOX-BEAM HEADER SPANS Headers Supporting Roof and Ceiling Only (50 ksi steel)a, b
457	TABLE R603.6(5) BOX-BEAM HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (33 ksi steel)a, b TABLE R603.6(5) BOX-BEAM HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (33 ksi steel)a, b
458	TABLE R603.6(6) BOX-BEAM HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (50 ksi steel)a, b TABLE R603.6(6) BOX-BEAM HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (50 ksi steel)a, b
459	TABLE R603.6(7) BOX-BEAM HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (33 ksi steel)a, b TABLE R603.6(7) BOX-BEAM HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (33 ksi steel)a, b
460	TABLE R603.6(8) BOX-BEAM HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (50 ksi steel)a, TABLE R603.6(8) BOX-BEAM HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (50 ksi steel)a,
461	TABLE R603.6(9) BOX-BEAM HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (33 ksi steel)a TABLE R603.6(9) BOX-BEAM HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (33 ksi steel)a
462	TABLE R603.6(10) BOX-BEAM HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (50 ksi steel)a, b TABLE R603.6(10) BOX-BEAM HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (50 ksi steel)a, b
463	TABLE R603.6(11) BOX-BEAM HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (33 ksi steel)a, b TABLE R603.6(11) BOX-BEAM HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (33 ksi steel)a, b
464	TABLE R603.6(12) BOX-BEAM HEADER SPANSa,b,cHeaders Supporting Two Floors, Roof and Ceiling (50 ksi steel)a,b TABLE R603.6(12) BOX-BEAM HEADER SPANSa,b,cHeaders Supporting Two Floors, Roof and Ceiling (50 ksi steel)a,b
465	TABLE R603.6(13) BACK-TO-BACK HEADER SPANS Headers Supporting Roof and Ceiling Only (33 ksi steel)a,b TABLE R603.6(13) BACK-TO-BACK HEADER SPANS Headers Supporting Roof and Ceiling Only (33 ksi steel)a,b
466	TABLE R603.6(14) BACK-TO-BACK HEADER SPANS Headers Supporting Roof and Ceiling Only (50 ksi steel)a,b TABLE R603.6(14) BACK-TO-BACK HEADER SPANS Headers Supporting Roof and Ceiling Only (50 ksi steel)a,b
467	TABLE R603.6(15) BACK-TO-BACK HEADER SPANS Headers Supporting Roof and Ceiling Only (33 ksi steel)a, b TABLE R603.6(15) BACK-TO-BACK HEADER SPANS Headers Supporting Roof and Ceiling Only (33 ksi steel)a, b
468	TABLE R603.6(16) BACK-TO-BACK HEADER SPANS Headers Supporting Roof and Ceiling Only (50 ksi steel)a, b TABLE R603.6(16) BACK-TO-BACK HEADER SPANS Headers Supporting Roof and Ceiling Only (50 ksi steel)a, b
469	TABLE R603.6(17) BACK-TO-BACK HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (33 ksi steel)a, b TABLE R603.6(17) BACK-TO-BACK HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (33 ksi steel)a, b
470	TABLE R603.6(18) BACK-TO-BACK HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (50 ksi steel)a, b TABLE R603.6(18) BACK-TO-BACK HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (50 ksi steel)a, b
471	TABLE R603.6(19) BACK-TO-BACK HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (33 ksi steel)a, b TABLE R603.6(19) BACK-TO-BACK HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (33 ksi steel)a, b
472	TABLE R603.6(20) BACK-TO-BACK HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (50 ksi steel)a, b TABLE R603.6(20) BACK-TO-BACK HEADER SPANS Headers Supporting One Floor, Roof and Ceiling (50 ksi steel)a, b
473	TABLE R603.6(21) BACK-TO-BACK HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (33 ksi steel)a, b TABLE R603.6(21) BACK-TO-BACK HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (33 ksi steel)a, b
474	TABLE R603.6(22) BACK-TO-BACK HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (50 ksi steel)a, b TABLE R603.6(22) BACK-TO-BACK HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (50 ksi steel)a, b
475	TABLE R603.6(23) BACK-TO-BACK HEADER SPANS Headers Supporting Two Floors, Roof and ceiling (33 ksi steel)a, b TABLE R603.6(23) BACK-TO-BACK HEADER SPANS Headers Supporting Two Floors, Roof and ceiling (33 ksi steel)a, b
476	TABLE R603.6(24) BACK-TO-BACK HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (50 ksi steel)a, b TABLE R603.6(24) BACK-TO-BACK HEADER SPANS Headers Supporting Two Floors, Roof and Ceiling (50 ksi steel)a, b
477	TABLE R603.7(1) TOTAL NUMBER OF JACK AND KING STUDS REQUIRED AT EACH END OF AN OPENING TABLE R603.7(1) TOTAL NUMBER OF JACK AND KING STUDS REQUIRED AT EACH END OF AN OPENING TABLE R603.7(2) HEADER TO KING STUD CONNECTION REQUIREMENTSa, b, c, d TABLE R603.7(2) HEADER TO KING STUD CONNECTION REQUIREMENTSa, b, c, d
478	TABLE R603.8 HEAD AND SILL TRACK SPAN TABLE R603.8 HEAD AND SILL TRACK SPAN FIGURE R603.9 STRUCTURAL SHEATHING FASTENING PATTERN FIGURE R603.9 STRUCTURAL SHEATHING FASTENING PATTERN
479	FIGURE R603.9.2 CORNER STUD HOLD-DOWN DETAIL FIGURE R603.9.2 CORNER STUD HOLD-DOWN DETAIL
480	TABLE R603.9.2(1) MINIMUM PERCENTAGE OF FULL HEIGHT STRUCTURAL SHEATHING ON EXTERIOR WALLSa,b TABLE R603.9.2(1) MINIMUM PERCENTAGE OF FULL HEIGHT STRUCTURAL SHEATHING ON EXTERIOR WALLSa,b TABLE R603.9.2(2)FULL HEIGHT SHEATHING LENGTH ADJUSTMENT FACTORS TABLE R603.9.2(2)FULL HEIGHT SHEATHING LENGTH ADJUSTMENT FACTORS
481	SECTION R604 – WOOD STRUCTURAL PANELS SECTION R604 – WOOD STRUCTURAL PANELS SECTION R605 – PARTICLEBOARD SECTION R605 – PARTICLEBOARD
482	SECTION R606 – GENERAL MASONRY CONSTRUCTION SECTION R606 – GENERAL MASONRY CONSTRUCTION FIGURE R606.2.1 MINIMUM THICKNESS—MASONRY BEARING AND EXTERIOR WALLS FOR A ONE-STORY DWELLING FIGURE R606.2.1 MINIMUM THICKNESS—MASONRY BEARING AND EXTERIOR WALLS FOR A ONE-STORY DWELLING
483	FIGURE R606.3(1) MASONRY CORBELING LIMITATIONS PER COURSE FIGURE R606.3(1) MASONRY CORBELING LIMITATIONS PER COURSE
484	FIGURE R606.3(2) MASONRY CORBELING LIMITATIONS PER COURSE FIGURE R606.3(2) MASONRY CORBELING LIMITATIONS PER COURSE FIGURE R606.4(2) MASONRY CORBELING LIMITATIONS PER COURSE FIGURE R606.4(2) MASONRY CORBELING LIMITATIONS PER COURSE
485	TABLE R606.5 ALLOWABLE COMPRESSIVE STRESSES FOREMPIRICAL DESIGN OF MASONRY TABLE R606.5 ALLOWABLE COMPRESSIVE STRESSES FOREMPIRICAL DESIGN OF MASONRY
486	FIGURE R606.8(1) MINIMUM HORIZONTAL JOINT REINFORCEMENT FOR STACK-BOND MASONRY FIGURE R606.8(1) MINIMUM HORIZONTAL JOINT REINFORCEMENT FOR STACK-BOND MASONRY
487	FIGURE R606.8(2) HORIZONTAL JOINT REINFORCEMENT-LADDER AND TRUSS TYPES FIGURE R606.8(2) HORIZONTAL JOINT REINFORCEMENT-LADDER AND TRUSS TYPES TABLE R606.9 SPACING OF LATERAL SUPPORT FOR MASONRY WALLS TABLE R606.9 SPACING OF LATERAL SUPPORT FOR MASONRY WALLS
488	FIGURE R606.9 BUILDING ELEMENTS PROVIDING LATERAL SUPPORT TO WALLS FIGURE R606.9 BUILDING ELEMENTS PROVIDING LATERAL SUPPORT TO WALLS FIGURE R606.9.1.2 INTERSECTING MASONRY WALLS FIGURE R606.9.1.2 INTERSECTING MASONRY WALLS
489	FIGURE R606.9.2.1(1) ANCHORAGE OF ROOF STRUCTURES FIGURE R606.9.2.1(1) ANCHORAGE OF ROOF STRUCTURES FIGURE R606.9.2.1(2) ANCHORAGE OF ROOF STRUCTURES FIGURE R606.9.2.1(2) ANCHORAGE OF ROOF STRUCTURES
491	FIGURE R606.11(1) ANCHORAGE REQUIREMENTS FOR MASONRY WALLS LOCATED IN SEISMIC DESIGN CATEGORY A, B OR C AND WHERE WIND LOADS ARE LESS THAN 30 PSF FIGURE R606.11(1) ANCHORAGE REQUIREMENTS FOR MASONRY WALLS LOCATED IN SEISMIC DESIGN CATEGORY A, B OR C AND WHERE WIND LOADS ARE LESS THAN 30 PSF
492	FIGURE R606.11(2) REQUIREMENTS FOR REINFORCED GROUTED MASONRY CONSTRUCTION IN SEISMIC DESIGN CATEGORY C FIGURE R606.11(2) REQUIREMENTS FOR REINFORCED GROUTED MASONRY CONSTRUCTION IN SEISMIC DESIGN CATEGORY C
493	FIGURE R606.11(3) REQUIREMENTS FOR REINFORCED MASONRY CONSTRUCTION IN SEISMIC DESIGN CATEGORY D0, D1, OR D2 FIGURE R606.11(3) REQUIREMENTS FOR REINFORCED MASONRY CONSTRUCTION IN SEISMIC DESIGN CATEGORY D0, D1, OR D2
494	TABLE R606.12.2.1 MINIMUM SOLID WALL LENGTH ALONG EXTERIOR WALL LINES TABLE R606.12.2.1 MINIMUM SOLID WALL LENGTH ALONG EXTERIOR WALL LINES
495	TABLE R606.12.3.2 MINIMUM DISTRIBUTED WALL REINFORCEMENT FOR BUILDING ASSIGNED TO SEISMIC DESIGN CATEGORY D0 or D1 TABLE R606.12.3.2 MINIMUM DISTRIBUTED WALL REINFORCEMENT FOR BUILDING ASSIGNED TO SEISMIC DESIGN CATEGORY D0 or D1
496	TABLE R606.12.4.1 MINIMUM REINFORCING FOR STACKED BONDED MASONRY WALLS INSEISMIC DESIGN CATEGORY D2 TABLE R606.12.4.1 MINIMUM REINFORCING FOR STACKED BONDED MASONRY WALLS INSEISMIC DESIGN CATEGORY D2 TABLE R606.12.4.2 MINIMUM REINFORCING FOR STACKED BONDED MASONRY WALLS IN SEISMIC DESIGN CATEGORY D2 TABLE R606.12.4.2 MINIMUM REINFORCING FOR STACKED BONDED MASONRY WALLS IN SEISMIC DESIGN CATEGORY D2
497	FIGURE R606.13 REINFORCING STEEL CLEARANCES FIGURE R606.13 REINFORCING STEEL CLEARANCES FIGURE R606.14 BEAM OR GIRDER BEARING ON MASONRY FIGURE R606.14 BEAM OR GIRDER BEARING ON MASONRY
498	FIGURE R606.14.1 JOIST-BEARING MINIMUMS FIGURE R606.14.1 JOIST-BEARING MINIMUMS TABLE R606.15.1 MINIMUM CORROSION PROTECTION TABLE R606.15.1 MINIMUM CORROSION PROTECTION
499	SECTION R607 – UNIT MASONRY SECTION R607 – UNIT MASONRY TABLE R607.1 MORTAR PROPORTIONSa, b TABLE R607.1 MORTAR PROPORTIONSa, b
501	SECTION R608 – MULTIPLE WYTHE MASONRY SECTION R608 – MULTIPLE WYTHE MASONRY FIGURE R608.1.1.1 BONDING WITH SOLID UNIT MASONRY FIGURE R608.1.1.1 BONDING WITH SOLID UNIT MASONRY FIGURE R608.1.1.2 BONDING WITH HOLLOW UNIT MASONRY FIGURE R608.1.1.2 BONDING WITH HOLLOW UNIT MASONRY
502	FIGURE R608.1.2.1(1) MASONRY BONDING—METAL TIES FIGURE R608.1.2.1(1) MASONRY BONDING—METAL TIES FIGURE R608.1.2.1(2) BONDING AROUND OPENING IN MASONRY WALLS FIGURE R608.1.2.1(2) BONDING AROUND OPENING IN MASONRY WALLS
503	FIGURE R608.1.2.2 BONDING WITH ADJUSTABLE WALL TIES FIGURE R608.1.2.2 BONDING WITH ADJUSTABLE WALL TIES
504	FIGURE R608.1.2.3 BONDING WITH PREFABRICATED JOINT REINFORCEMENT FIGURE R608.1.2.3 BONDING WITH PREFABRICATED JOINT REINFORCEMENT SECTION R609 – GROUTED MASONRY SECTION R609 – GROUTED MASONRY
505	FIGURE R609.1 GROUTED MULTIPLE-WYTHE MASONRY FIGURE R609.1 GROUTED MULTIPLE-WYTHE MASONRY FIGURE R609.1.2 GROUTED MULTIPLE-WYTHE MASONRY FIGURE R609.1.2 GROUTED MULTIPLE-WYTHE MASONRY
506	TABLE R609.1.1 GROUT PROPORTIONS BY VOLUME FOR MASONRY CONSTRUCTION TABLE R609.1.1 GROUT PROPORTIONS BY VOLUME FOR MASONRY CONSTRUCTION TABLE R609.1.2 GROUT SPACE DIMENSIONS AND POUR HEIGHTS TABLE R609.1.2 GROUT SPACE DIMENSIONS AND POUR HEIGHTS
507	FIGURE R609.3.1 REINFORCEMENT PLACEMENT LIMITATIONS FIGURE R609.3.1 REINFORCEMENT PLACEMENT LIMITATIONS
508	FIGURE R609.4.1(1) REINFORCEMENT PLACEMENT LIMITATIONS FIGURE R609.4.1(1) REINFORCEMENT PLACEMENT LIMITATIONS FIGURE R609.4.1(2) REINFORCED HOLLOW UNIT MASONRY VERTICAL CELL ALIGNMENT FIGURE R609.4.1(2) REINFORCED HOLLOW UNIT MASONRY VERTICAL CELL ALIGNMENT
509	FIGURE R609.4.1(3) MASONRY REINFORCING STEEL ALIGNMENT FIGURE R609.4.1(3) MASONRY REINFORCING STEEL ALIGNMENT FIGURE R609.4.1(4) REINFORCED HOLLOW UNIT MASONRY CLEANOUTS FIGURE R609.4.1(4) REINFORCED HOLLOW UNIT MASONRY CLEANOUTS
510	FIGURE R609.4.1(5) MASONRY REINFORCING STEEL ALIGNMENT FIGURE R609.4.1(5) MASONRY REINFORCING STEEL ALIGNMENT SECTION R610 – GLASS UNIT MASONRY SECTION R610 – GLASS UNIT MASONRY
511	FIGURE R610.4.1 GLASS UNIT MASONRY DESIGN WIND LOAD RESISTANCE FIGURE R610.4.1 GLASS UNIT MASONRY DESIGN WIND LOAD RESISTANCE
512	FIGURE R610.5.2.1 GLASS UNIT MASONRY FIGURE R610.5.2.1 GLASS UNIT MASONRY
513	SECTION R611 – EXTERIOR CONCRETEWALL CONSTRUCTION SECTION R611 – EXTERIOR CONCRETEWALL CONSTRUCTION
514	FIGURE R611.2 ICF APPLICABILITY LIMITS FIGURE R611.2 ICF APPLICABILITY LIMITS
515	TABLE R611.3 DIMENSIONAL REQUIREMENTS FOR WALLSa,b TABLE R611.3 DIMENSIONAL REQUIREMENTS FOR WALLSa,b
516	FIGURE R611.3(1) FLAT WALL SYSTEM FIGURE R611.3(1) FLAT WALL SYSTEM FIGURE R611.3(2) WAFFLE-GRID WALL SYSTEM FIGURE R611.3(2) WAFFLE-GRID WALL SYSTEM FIGURE R611.3(3) SCREEN-GRID WALL SYSTEM FIGURE R611.3(3) SCREEN-GRID WALL SYSTEM
519	TABLE R611.5.4(1) LAP SPLICE AND TENSION DEVELOPMENT LENGTHS TABLE R611.5.4(1) LAP SPLICE AND TENSION DEVELOPMENT LENGTHS FIGURE R611.5.4(1) LAP SPLICES FIGURE R611.5.4(1) LAP SPLICES
520	FIGURE R611.5.4(2) DEVELOPMENT LENGTH AND COVER FOR HOOKS AND BAR EXTENSION FIGURE R611.5.4(2) DEVELOPMENT LENGTH AND COVER FOR HOOKS AND BAR EXTENSION FIGURE R611.5.4(3) STANDARD HOOKS FIGURE R611.5.4(3) STANDARD HOOKS
522	TABLE R611.5.4(2) MAXIMUM SPACING FOR ALTERNATE BAR SIZE AND/OR ALTERNATE GRADE OF STEELa, b, c TABLE R611.5.4(2) MAXIMUM SPACING FOR ALTERNATE BAR SIZE AND/OR ALTERNATE GRADE OF STEELa, b, c
523	FIGURE R611.6(1) ABOVE-GRADE CONCRETE WALL CONSTRUCTION ONE STORY FIGURE R611.6(1) ABOVE-GRADE CONCRETE WALL CONSTRUCTION ONE STORY FIGURE R611.6(2) ABOVE-GRADE CONCRETE WALL CONSTRUCTION CONCRETE FIRST-STORY AND LIGHT-FRAMED SECOND-STORY FIGURE R611.6(2) ABOVE-GRADE CONCRETE WALL CONSTRUCTION CONCRETE FIRST-STORY AND LIGHT-FRAMED SECOND-STORY
524	FIGURE R611.6(3) ABOVE-GRADE CONCRETE WALL CONSTRUCTION TWO-STORY FIGURE R611.6(3) ABOVE-GRADE CONCRETE WALL CONSTRUCTION TWO-STORY FIGURE R611.6(4) ABOVE-GRADE CONCRETE WALL SUPPORTED ON MONOLITHIC SLAB-ON GROUND FOOTING FIGURE R611.6(4) ABOVE-GRADE CONCRETE WALL SUPPORTED ON MONOLITHIC SLAB-ON GROUND FOOTING
525	TABLE R611.6(1) MINIMUM VERTICAL REINFORCEMENT FOR FLAT ABOVE-GRADE WALLSa, b, c, d, e TABLE R611.6(1) MINIMUM VERTICAL REINFORCEMENT FOR FLAT ABOVE-GRADE WALLSa, b, c, d, e
526	TABLE R611.6(2) MINIMUM VERTICAL REINFORCEMENT FOR WAFFLE-GRID ABOVE-GRADE WALLSa, b, c, d, e TABLE R611.6(2) MINIMUM VERTICAL REINFORCEMENT FOR WAFFLE-GRID ABOVE-GRADE WALLSa, b, c, d, e
527	TABLE R611.6(3) MINIMUM VERTICAL REINFORCEMENT FOR 6-INCH SCREEN-GRID ABOVE-GRADE WALLSa, b, c, d, e TABLE R611.6(3) MINIMUM VERTICAL REINFORCEMENT FOR 6-INCH SCREEN-GRID ABOVE-GRADE WALLSa, b, c, d, e
528	TABLE R611.6(4) MINIMUM VERTICAL REINFORCEMENT FOR FLAT, WAFFLE- AND SCREEN-GRID ABOVE-GRADE WALLS DESIGNED CONTINUOUS WITH FOUNDATION STEM WALLSa, b, c, d, e, k, l TABLE R611.6(4) MINIMUM VERTICAL REINFORCEMENT FOR FLAT, WAFFLE- AND SCREEN-GRID ABOVE-GRADE WALLS DESIGNED CONTINUOUS WITH FOUNDATION STEM WALLSa, b, c, d, e, k, l
529	TABLE R611.6(4)—continued MINIMUM VERTICAL REINFORCEMENT FOR FLAT, WAFFLE- AND SCREEN-GRID ABOVE-GRADE WALLS DESIGNED CONTINUOUS WITH FOUNDATION STEM WALLSa, b, c, d, e, k, l TABLE R611.6(4)—continued MINIMUM VERTICAL REINFORCEMENT FOR FLAT, WAFFLE- AND SCREEN-GRID ABOVE-GRADE WALLS DESIGNED CONTINUOUS WITH FOUNDATION STEM WALLSa, b, c, d, e, k, l
530	EQUATION R611-1 EQUATION R611-1
531	EQUATION R611-2 EQUATION R611-2
532	TABLE R611.7.1.1 VELOCITY PRESSURES TABLE R611.7.1.1 VELOCITY PRESSURES
533	TABLE R611.7(1A) UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE ONE STORY OR TOP STORY OF TWO-STORYa,c,d,e,f,g TABLE R611.7(1A) UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE ONE STORY OR TOP STORY OF TWO-STORYa,c,d,e,f,g
534	TABLE R611.7(1A)—continued UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE ONE STORY OR TOP STORY OF TWO-STORYa,c,d,e,f,g TABLE R611.7(1A)—continued UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE ONE STORY OR TOP STORY OF TWO-STORYa,c,d,e,f,g
535	TABLE R611.7(1B) UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE FIRST STORY OF TWO-STORYa,c,d,e,f,g TABLE R611.7(1B) UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE FIRST STORY OF TWO-STORYa,c,d,e,f,g
536	TABLE R611.7(1B)—continued UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE FIRST STORY OF TWO-STORYa,c,d,e,f,g TABLE R611.7(1B)—continued UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE FIRST STORY OF TWO-STORYa,c,d,e,f,g
537	TABLE R611.7(1C) UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR SIDEWALL FOR WIND PARALLEL TO RIDGEa,c,d,e,f,g TABLE R611.7(1C) UNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR SIDEWALL FOR WIND PARALLEL TO RIDGEa,c,d,e,f,g
538	TABLE R611.7(1C)—continuedUNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE FIRST STORY OF TWO-STORYa,c,d,e,f,g TABLE R611.7(1C)—continuedUNREDUCED LENGTH, UR, OF SOLID WALL REQUIRED IN EACH EXTERIOR ENDWALL FOR WIND PERPENDICULAR TO RIDGE FIRST STORY OF TWO-STORYa,c,d,e,f,g
539	FIGURE R611.7(1) MINIMUM SOLID WALL LENGTH FIGURE R611.7(1) MINIMUM SOLID WALL LENGTH
540	FIGURE R611.7(2) VERTICAL REINFORCEMENT LAYOUT DETAIL FIGURE R611.7(2) VERTICAL REINFORCEMENT LAYOUT DETAIL
541	TABLE R611.7(2) REDUCTION FACTOR, R1, FOR BUILDINGS WITH MEAN ROOF HEIGHT LESS THAN 35 FEETa TABLE R611.7(2) REDUCTION FACTOR, R1, FOR BUILDINGS WITH MEAN ROOF HEIGHT LESS THAN 35 FEETa FIGURE R611.7(3) VERTICAL WALL REINFORCEMENT ADJACENT TO WALL OPENINGS FIGURE R611.7(3) VERTICAL WALL REINFORCEMENT ADJACENT TO WALL OPENINGS
542	TABLE R611.7(3) REDUCTION FACTOR, R2, FOR FLOOR-TO-CEILING WALL HEIGHTS LESS THAN 10 FEETa,b TABLE R611.7(3) REDUCTION FACTOR, R2, FOR FLOOR-TO-CEILING WALL HEIGHTS LESS THAN 10 FEETa,b
543	TABLE R611.7(4) REDUCTION FACTOR FOR DESIGN STRENGTH, R3, FOR FLAT, WAFFLE- AND SCREEN-GRID WALLSa,c TABLE R611.7(4) REDUCTION FACTOR FOR DESIGN STRENGTH, R3, FOR FLAT, WAFFLE- AND SCREEN-GRID WALLSa,c
545	FIGURE R611.8(1) REINFORCEMENT OF OPENINGS FIGURE R611.8(1) REINFORCEMENT OF OPENINGS
546	FIGURE R611.8(2) LINTEL FOR FLAT WALLS FIGURE R611.8(2) LINTEL FOR FLAT WALLS FIGURE R611.8(3) LINTELS FOR WAFFLE-GRID WALLS FIGURE R611.8(3) LINTELS FOR WAFFLE-GRID WALLS
547	FIGURE R611.8(4) LINTELS FOR SCREEN-GRID WALLS FIGURE R611.8(4) LINTELS FOR SCREEN-GRID WALLS
548	TABLE R611.8.2 APPLICABLE REQUIREMENTS FOR LINTELS TABLE R611.8.2 APPLICABLE REQUIREMENTS FOR LINTELS
550	TABLE R611.8(1) LINTEL DESIGN LOADING CONDITIONSa, b, d TABLE R611.8(1) LINTEL DESIGN LOADING CONDITIONSa, b, d
551	TABLE R611.8(2) MAXIMUM ALLOWABLE CLEAR SPANS FOR 4-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(2) MAXIMUM ALLOWABLE CLEAR SPANS FOR 4-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET
552	TABLE R611.8(2)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 4-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(2)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 4-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET
553	TABLE R611.8(3) MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(3) MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET
554	TABLE R611.8(3)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(3)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET
555	TABLE R611.8(4) MAXIMUM ALLOWABLE CLEAR SPANS FOR 8-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(4) MAXIMUM ALLOWABLE CLEAR SPANS FOR 8-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET
556	TABLE R611.8(4)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 8-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(4)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 8-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET
557	TABLE R611.8(5) MAXIMUM ALLOWABLE CLEAR SPANS FOR 10-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(5) MAXIMUM ALLOWABLE CLEAR SPANS FOR 10-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET
558	TABLE R611.8(5)—continuedMAXIMUM ALLOWABLE CLEAR SPANS FOR 10-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(5)—continuedMAXIMUM ALLOWABLE CLEAR SPANS FOR 10-INCH NOMINAL THICK FLAT LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, m ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET
559	TABLE R611.8(6) MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH THICK WAFFLE-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, o MAXIMUM ROOF CLEAR SPAN 40 FEET AND MAXIMUM FLOOR SPAN 32 FEET TABLE R611.8(6) MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH THICK WAFFLE-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, o MAXIMUM ROOF CLEAR SPAN 40 FEET AND MAXIMUM FLOOR SPAN 32 FEET
560	TABLE R611.8(6)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH THICK WAFFLE-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, o MAXIMUM ROOF CLEAR SPAN 40 FEET AND MAXIMUM FLOOR SPAN 32 FEET TABLE R611.8(6)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH THICK WAFFLE-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, o MAXIMUM ROOF CLEAR SPAN 40 FEET AND MAXIMUM FLOOR SPAN 32 FEET
561	TABLE R611.8(7) MAXIMUM ALLOWABLE CLEAR SPANS FOR 8-INCH THICK WAFFLE-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, o MAXIMUM ROOF CLEAR SPAN 40 FEET AND MAXIMUM FLOOR CLEAR SPAN 32 FEET TABLE R611.8(7) MAXIMUM ALLOWABLE CLEAR SPANS FOR 8-INCH THICK WAFFLE-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, o MAXIMUM ROOF CLEAR SPAN 40 FEET AND MAXIMUM FLOOR CLEAR SPAN 32 FEET
562	TABLE R611.8(7)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 8-INCH THICK WAFFLE-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, o MAXIMUM ROOF CLEAR SPAN 40 FEET AND MAXIMUM FLOOR CLEAR SPAN 32 FEET TABLE R611.8(7)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR 8-INCH THICK WAFFLE-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, o MAXIMUM ROOF CLEAR SPAN 40 FEET AND MAXIMUM FLOOR CLEAR SPAN 32 FEET
563	TABLE R611.8(8) MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH THICK SCREEN-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, p ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(8) MAXIMUM ALLOWABLE CLEAR SPANS FOR 6-INCH THICK SCREEN-GRID LINTELS IN LOAD-BEARING WALLSa, b, c, d, e, f, p ROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET
564	TABLE R611.8(9) MAXIMUM ALLOWABLE CLEAR SPANS FOR FLAT LINTELS WITHOUT STIRRUPS IN NONLOAD-BEARING WALLSa, b, c, d, e, g, h TABLE R611.8(9) MAXIMUM ALLOWABLE CLEAR SPANS FOR FLAT LINTELS WITHOUT STIRRUPS IN NONLOAD-BEARING WALLSa, b, c, d, e, g, h
565	TABLE R611.8(9)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR FLAT LINTELS WITHOUT STIRRUPS IN NONLOAD-BEARING WALLSa, b, c, d, e, g, hROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(9)—continued MAXIMUM ALLOWABLE CLEAR SPANS FOR FLAT LINTELS WITHOUT STIRRUPS IN NONLOAD-BEARING WALLSa, b, c, d, e, g, hROOF CLEAR SPAN 40 FEET AND FLOOR CLEAR SPAN 32 FEET TABLE R611.8(10) MAXIMUM ALLOWABLE CLEAR SPANS FOR WAFFLE-GRID AND SCREEN GRID LINTELS WITHOUT STIRRUPS IN NONLOAD-BEARING WALLSc, d, e, f, g TABLE R611.8(10) MAXIMUM ALLOWABLE CLEAR SPANS FOR WAFFLE-GRID AND SCREEN GRID LINTELS WITHOUT STIRRUPS IN NONLOAD-BEARING WALLSc, d, e, f, g
567	FIGURE R611.9(1) WOOD FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PERPENDICULAR FIGURE R611.9(1) WOOD FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PERPENDICULAR
568	TABLE R611.9(1) WOOD FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c TABLE R611.9(1) WOOD FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c
569	FIGURE R611.9(2) WOOD FRAMED FLOOR TO SIDE OF CONCRETE WALL FRAMING PARALLEL FIGURE R611.9(2) WOOD FRAMED FLOOR TO SIDE OF CONCRETE WALL FRAMING PARALLEL
570	TABLE R611.9(2) WOOD FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PARALLELa, b TABLE R611.9(2) WOOD FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PARALLELa, b
571	FIGURE R611.9(3) WOOD FRAMED FLOOR TO TOP OF CONCRETE WALL FRAMING PERPENDICULAR FIGURE R611.9(3) WOOD FRAMED FLOOR TO TOP OF CONCRETE WALL FRAMING PERPENDICULAR
572	TABLE R611.9(3) WOOD FRAMED FLOOR TO TOP OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d, e TABLE R611.9(3) WOOD FRAMED FLOOR TO TOP OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d, e
573	FIGURE R611.9(4) WOOD FRAMED FLOOR TO TOP OF CONCRETE WALL FRAMING PARALLEL FIGURE R611.9(4) WOOD FRAMED FLOOR TO TOP OF CONCRETE WALL FRAMING PARALLEL
574	TABLE R611.9(4) WOOD FRAMED FLOOR TO TOP OF CONCRETE WALL, FRAMING PARALLELa, b, c, d, e TABLE R611.9(4) WOOD FRAMED FLOOR TO TOP OF CONCRETE WALL, FRAMING PARALLELa, b, c, d, e
575	FIGURE R611.9(5) COLD-FORMED STEEL FLOOR TO SIDE OF CONCRETE WALL, FRAMING PERPENDICULAR FIGURE R611.9(5) COLD-FORMED STEEL FLOOR TO SIDE OF CONCRETE WALL, FRAMING PERPENDICULAR
576	TABLE R611.9(5) COLD-FORMED STEEL FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d TABLE R611.9(5) COLD-FORMED STEEL FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d
577	FIGURE R611.9(6) COLD-FORMED STEEL FLOOR TO SIDE OF CONCRETE WALL, FRAMING PARALLEL FIGURE R611.9(6) COLD-FORMED STEEL FLOOR TO SIDE OF CONCRETE WALL, FRAMING PARALLEL
578	TABLE R611.9(6) COLD-FORMED STEEL FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PARALLELa, b, c, d TABLE R611.9(6) COLD-FORMED STEEL FRAMED FLOOR TO SIDE OF CONCRETE WALL, FRAMING PARALLELa, b, c, d
579	FIGURE R611.9(7) COLD-FORMED STEEL FLOOR TO TOP OF CONCRETE WALL FRAMING PERPENDICULAR FIGURE R611.9(7) COLD-FORMED STEEL FLOOR TO TOP OF CONCRETE WALL FRAMING PERPENDICULAR
580	TABLE R611.9(7) COLD-FORMED STEEL FRAMED FLOOR TO TOP OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d, e TABLE R611.9(7) COLD-FORMED STEEL FRAMED FLOOR TO TOP OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d, e
581	FIGURE R611.9(8) COLD-FORMED STEEL FLOOR TO TOP OF CONCRETE WALL, FRAMING PARALLEL FIGURE R611.9(8) COLD-FORMED STEEL FLOOR TO TOP OF CONCRETE WALL, FRAMING PARALLEL
582	TABLE R611.9(8) COLD-FORMED STEEL FRAMED FLOOR TO TOP OF CONCRETE WALL, FRAMING PARALLELa, b, c, d, e TABLE R611.9(8) COLD-FORMED STEEL FRAMED FLOOR TO TOP OF CONCRETE WALL, FRAMING PARALLELa, b, c, d, e
583	FIGURE R611.9(9) WOOD FRAMED ROOF TO TOP OF CONCRETE WALL, FRAMING PERPENDICULAR FIGURE R611.9(9) WOOD FRAMED ROOF TO TOP OF CONCRETE WALL, FRAMING PERPENDICULAR
584	TABLE R611.9(9) WOOD FRAMED ROOF TO TOP OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d, e TABLE R611.9(9) WOOD FRAMED ROOF TO TOP OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d, e
585	FIGURE R611.9(10) WOOD FRAMED ROOF TO TOP OF CONCRETE WALL FRAMING PARALLEL FIGURE R611.9(10) WOOD FRAMED ROOF TO TOP OF CONCRETE WALL FRAMING PARALLEL
586	TABLE R611.9(10) WOOD FRAMED ROOF TO TOP OF CONCRETE WALL, FRAMING PARALLELa, b, c, d, e TABLE R611.9(10) WOOD FRAMED ROOF TO TOP OF CONCRETE WALL, FRAMING PARALLELa, b, c, d, e
587	FIGURE R611.9(11) COLD-FORMED STEEL ROOF TO TOP OF CONCRETE WALL, FRAMING PERPENDICULAR FIGURE R611.9(11) COLD-FORMED STEEL ROOF TO TOP OF CONCRETE WALL, FRAMING PERPENDICULAR
588	TABLE R611.9(11) COLD-FORMED STEEL ROOF TO TOP OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d TABLE R611.9(11) COLD-FORMED STEEL ROOF TO TOP OF CONCRETE WALL, FRAMING PERPENDICULARa, b, c, d
589	FIGURE R611.9(12) COLD-FORMED STEEL ROOF TO TOP OF CONCRETE WALL, FRAMING PARALLEL FIGURE R611.9(12) COLD-FORMED STEEL ROOF TO TOP OF CONCRETE WALL, FRAMING PARALLEL
590	TABLE R611.9(12) COLD-FORMED STEEL ROOF TO TOP OF CONCRETE WALL, FRAMING PARALLELa, b, c, d, e TABLE R611.9(12) COLD-FORMED STEEL ROOF TO TOP OF CONCRETE WALL, FRAMING PARALLELa, b, c, d, e
591	SECTION R612 – EXTERIOR WINDOWS AND DOORS SECTION R612 – EXTERIOR WINDOWS AND DOORS FIGURE R612.2 WINDOW SILL HEIGHT FIGURE R612.2 WINDOW SILL HEIGHT
593	FIGURE R612.8(1) THROUGH THE FRAME FIGURE R612.8(1) THROUGH THE FRAME FIGURE R612.8(2) FRAME CLIP FIGURE R612.8(2) FRAME CLIP FIGURE R612.8(3) THROUGH THE FRAME FIGURE R612.8(3) THROUGH THE FRAME FIGURE R612.8(4) FRAME CLIP FIGURE R612.8(4) FRAME CLIP
594	FIGURE R612.8(5) THROUGH THE FLANGE FIGURE R612.8(5) THROUGH THE FLANGE FIGURE R612.8(6) THROUGH THE FLANGE FIGURE R612.8(6) THROUGH THE FLANGE FIGURE R612.8(7) FRAME CLIP FIGURE R612.8(7) FRAME CLIP FIGURE R612.8(8) THROUGH THE FLANGE FIGURE R612.8(8) THROUGH THE FLANGE
595	SECTION R613 – STRUCTURAL INSULATED PANEL WALL CONSTRUCTION SECTION R613 – STRUCTURAL INSULATED PANEL WALL CONSTRUCTION
596	TABLE R613.3.1 MINIMUM PROPERTIES FOR POLYURETHANE INSULATION USED AS SIPS CORE TABLE R613.3.1 MINIMUM PROPERTIES FOR POLYURETHANE INSULATION USED AS SIPS CORE
597	TABLE R613.3.2 MINIMUM PROPERTIESa FOR WOOD STRUCTURAL PANEL FACING MATERIAL USED IN SIP WALLS TABLE R613.3.2 MINIMUM PROPERTIESa FOR WOOD STRUCTURAL PANEL FACING MATERIAL USED IN SIP WALLS
598	FIGURE R613.4 SIP WALL PANEL FIGURE R613.4 SIP WALL PANEL
599	TABLE R613.5(1) MINIMUM THICKNESS FOR SIP WALL SUPPORTING SIP LIGHT-FRAME ROOF ONLY (inches) TABLE R613.5(1) MINIMUM THICKNESS FOR SIP WALL SUPPORTING SIP LIGHT-FRAME ROOF ONLY (inches)
600	TABLE R613.5(2) MINIMUM THICKNESS FOR SIP WALLS SUPPORTING SIP OR LIGHT-FRAME ONE STORY AND ROOF (inches TABLE R613.5(2) MINIMUM THICKNESS FOR SIP WALLS SUPPORTING SIP OR LIGHT-FRAME ONE STORY AND ROOF (inches
601	FIGURE R613.5(1) MAXIMUM ALLOWABLE HEIGHT OF SIP WALLS FIGURE R613.5(1) MAXIMUM ALLOWABLE HEIGHT OF SIP WALLS FIGURE R613.5(2) MAXIMUM ALLOWABLE HEIGHT OF SIP WALLS FIGURE R613.5(2) MAXIMUM ALLOWABLE HEIGHT OF SIP WALLS
602	FIGURE R613.5(3) TRUSSED ROOF TO TOP PLATE CONNECTION FIGURE R613.5(3) TRUSSED ROOF TO TOP PLATE CONNECTION FIGURE R613.5(4) SIP WALL TO WALL PLATFORM FRAME CONNECTION FIGURE R613.5(4) SIP WALL TO WALL PLATFORM FRAME CONNECTION
603	FIGURE R613.5(5) SIP WALL TO WALL BALLOON FRAME CONNECTION (I-Joist floor shown for Illustration only FIGURE R613.5(5) SIP WALL TO WALL BALLOON FRAME CONNECTION (I-Joist floor shown for Illustration only FIGURE R613.5.1 SIP WALL FRAMING CONFIGURATION FIGURE R613.5.1 SIP WALL FRAMING CONFIGURATION
604	FIGURE R613.5.2 SIP WALL TO CONCRETE SLAB FOR FOUNDATION WALL ATTACHMENT FIGURE R613.5.2 SIP WALL TO CONCRETE SLAB FOR FOUNDATION WALL ATTACHMENT
605	FIGURE R613.8 TYPICAL SIP CONNECTION DETAILS FOR VERTICAL IN-PLANE JOINTS FIGURE R613.8 TYPICAL SIP CONNECTION DETAILS FOR VERTICAL IN-PLANE JOINTS FIGURE R613.9 SIP CORNER FRAMING DETAIL FIGURE R613.9 SIP CORNER FRAMING DETAIL
606	TABLE R614.10 MAXIMUM SPANS FOR 117/8 INCH DEEP SIP HEADERS (feet) TABLE R614.10 MAXIMUM SPANS FOR 117/8 INCH DEEP SIP HEADERS (feet) BIBLIOGRAPHY BIBLIOGRAPHY
609	CHAPTER 7: WALL COVERING CHAPTER 7: WALL COVERING GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION R701 – GENERAL SECTION R701 – GENERAL SECTION R702 – INTERIOR COVERING SECTION R702 – INTERIOR COVERING
610	FIGURE R701.2(1) PLASTER WALL COVERING—APPLICABLE TERMS FIGURE R701.2(1) PLASTER WALL COVERING—APPLICABLE TERMS FIGURE R701.2(2) GYPSUM APPLICATION–APPLICABLE TERMS FIGURE R701.2(2) GYPSUM APPLICATION–APPLICABLE TERMS
611	TABLE R702.1(1) THICKNESS OF PLASTER TABLE R702.1(1) THICKNESS OF PLASTER TABLE R702.1(2) GYPSUM PLASTER PROPORTIONSa TABLE R702.1(2) GYPSUM PLASTER PROPORTIONSa
612	TABLE R702.1(3) CEMENT PLASTER PROPORTIONS, PARTS BY VOLUME TABLE R702.1(3) CEMENT PLASTER PROPORTIONS, PARTS BY VOLUME
613	FIGURE R702.2(1) INTERIOR PLASTERING SYSTEM FIGURE R702.2(1) INTERIOR PLASTERING SYSTEM FIGURE R702.2(2) VENEER PLASTER SYSTEM FIGURE R702.2(2) VENEER PLASTER SYSTEM
614	FIGURE R702.3.2(1) INTERIOR WALL COVERING-DIRECT APPLICATION FIGURE R702.3.2(1) INTERIOR WALL COVERING-DIRECT APPLICATION
615	FIGURE R702.3.2(2) INTERIOR WALL COVERING—FURRED APPLICATION OVER MASONRY OR CONCRETE FIGURE R702.3.2(2) INTERIOR WALL COVERING—FURRED APPLICATION OVER MASONRY OR CONCRETE FIGURE R702.3.2(3) INTERIOR WALL COVERING—FURRED APPLICATION OVER SOLID BACKING OR OVER STUDS FIGURE R702.3.2(3) INTERIOR WALL COVERING—FURRED APPLICATION OVER SOLID BACKING OR OVER STUDS
617	TABLE R702.3.5 MINIMUM THICKNESS AND APPLICATION OF GYPSUM BOARD TABLE R702.3.5 MINIMUM THICKNESS AND APPLICATION OF GYPSUM BOARD
618	FIGURE R702.3.5(1) GYPSUM BOARD APPLICATION FIGURE R702.3.5(1) GYPSUM BOARD APPLICATION FIGURE R702.3.5(2) GYPSUM BOARD—SINGLE-NAILING APPLICATION FIGURE R702.3.5(2) GYPSUM BOARD—SINGLE-NAILING APPLICATION FIGURE R702.3.5(3) GYPSUM BOARD—DOUBLE-NAILING APPLICATION FIGURE R702.3.5(3) GYPSUM BOARD—DOUBLE-NAILING APPLICATION
619	TABLE R702.3.7 SHEAR CAPACITY FOR HORIZONTAL WOOD-FRAMED GYPSUM BOARD DIAPHRAGM CEILING ASSEMBLIES TABLE R702.3.7 SHEAR CAPACITY FOR HORIZONTAL WOOD-FRAMED GYPSUM BOARD DIAPHRAGM CEILING ASSEMBLIES FIGURE R702.3.7(1) HORIZONTAL GYPSUM BOARD CEILING DIAPHRAGM CONSTRUCTION FIGURE R702.3.7(1) HORIZONTAL GYPSUM BOARD CEILING DIAPHRAGM CONSTRUCTION
620	FIGURE R702.3.7(2) PERIMETER BLOCKING FIGURE R702.3.7(2) PERIMETER BLOCKING
621	FIGURE R702.4.1 INTERIOR WALL TILE INSTALLATION FIGURE R702.4.1 INTERIOR WALL TILE INSTALLATION FIGURE R702.4.2 EXAMPLE OF WALL TILE INSTALLATION TUB AND SHOWER AREA FIGURE R702.4.2 EXAMPLE OF WALL TILE INSTALLATION TUB AND SHOWER AREA
622	SECTION R703 – EXTERIOR COVERING SECTION R703 – EXTERIOR COVERING
624	FIGURE R703.1 TYPICAL WOOD STUD WALL CONSTRUCTION FIGURE R703.1 TYPICAL WOOD STUD WALL CONSTRUCTION
625	FIGURE R703.3.1(1) VERTICAL JOINT TREATMENT OF PANEL SIDING FIGURE R703.3.1(1) VERTICAL JOINT TREATMENT OF PANEL SIDING FIGURE R703.3.1(2) HORIZONTAL JOINT TREATMENT OF PANEL SIDING FIGURE R703.3.1(2) HORIZONTAL JOINT TREATMENT OF PANEL SIDING
626	TABLE R703.5.2 MAXIMUM WEATHER EXPOSURE FOR WOOD SHAKES AND SHINGLES ON EXTERIOR WALLSa, b, c TABLE R703.5.2 MAXIMUM WEATHER EXPOSURE FOR WOOD SHAKES AND SHINGLES ON EXTERIOR WALLSa, b, c
627	TABLE R703.4 WEATHER–RESISTANT SIDING ATTACHMENT AND MINIMUM THICKNESS TABLE R703.4 WEATHER–RESISTANT SIDING ATTACHMENT AND MINIMUM THICKNESS
628	TABLE R703.4—continued WEATHER–RESISTANT SIDING ATTACHMENT AND MINIMUM THICKNESS TABLE R703.4—continued WEATHER–RESISTANT SIDING ATTACHMENT AND MINIMUM THICKNESS
629	FIGURE R703.6(1) EXTERIOR PLASTERING SYSTEM FIGURE R703.6(1) EXTERIOR PLASTERING SYSTEM FIGURE R703.6(2) EXTERIOR PLASTER—WOOD FRAME ON CONCRETE FLOOR SLAB FIGURE R703.6(2) EXTERIOR PLASTER—WOOD FRAME ON CONCRETE FLOOR SLAB
630	FIGURE R703.6(3) WEEP SCREED FOR EXTERIOR PLASTER ON STUD WALL AT SLAB ON GRADE FIGURE R703.6(3) WEEP SCREED FOR EXTERIOR PLASTER ON STUD WALL AT SLAB ON GRADE
633	FIGURE R703.7 MASONRY VENEER WALL DETAILS FIGURE R703.7 MASONRY VENEER WALL DETAILS
634	FIGURE R703.7–continued MASONRY VENEER WALL DETAILS FIGURE R703.7–continued MASONRY VENEER WALL DETAILS
635	TABLE R703.7(1) STONE OR MASONRY VENEER LIMITATIONS AND REQUIREMENTS, WOOD OR STEEL FRAMING, SEISMIC DESIGN CATEGORIES A, B AND C TABLE R703.7(1) STONE OR MASONRY VENEER LIMITATIONS AND REQUIREMENTS, WOOD OR STEEL FRAMING, SEISMIC DESIGN CATEGORIES A, B AND C TABLE R703.7(2) STONE OR MASONRY VENEER LIMITATIONS AND REQUIREMENTS, ONE- AND TWO-FAMILY DETACHED DWELLINGS, WOOD FRAMING, SEISMIC DESIGN CATEGORIES D0, D1 AND D2 TABLE R703.7(2) STONE OR MASONRY VENEER LIMITATIONS AND REQUIREMENTS, ONE- AND TWO-FAMILY DETACHED DWELLINGS, WOOD FRAMING, SEISMIC DESIGN CATEGORIES D0, D1 AND D2
636	FIGURE R703.7.2.1 EXTERIOR MASONRY VENEER SUPPORT BY STEEL ANGLES FIGURE R703.7.2.1 EXTERIOR MASONRY VENEER SUPPORT BY STEEL ANGLES FIGURE R703.7.2.2 EXTERIOR MASONRY VENEER SUPPORT BY ROOF MEMBERS FIGURE R703.7.2.2 EXTERIOR MASONRY VENEER SUPPORT BY ROOF MEMBERS
637	TABLE R703.7.3.2 HEIGHT OF MASONRY VENEER ABOVE OPENING TABLE R703.7.3.2 HEIGHT OF MASONRY VENEER ABOVE OPENING TABLE R703.7.3.1 ALLOWABLE SPANS FOR LINTELS SUPPORTING MASONRY VENEERa, b, c, d TABLE R703.7.3.1 ALLOWABLE SPANS FOR LINTELS SUPPORTING MASONRY VENEERa, b, c, d
638	FIGURE R703.7.3.2 MASONRY VENEER OPENING FIGURE R703.7.3.2 MASONRY VENEER OPENING
640	FIGURE R703.8 FLASHING EXAMPLES FIGURE R703.8 FLASHING EXAMPLES
642	BIBLIOGRAPHY BIBLIOGRAPHY
645	CHAPTER 8: ROOF-CEILING CONSTRUCTION CHAPTER 8: ROOF-CEILING CONSTRUCTION GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION R801 – GENERAL SECTION R801 – GENERAL SECTION R802 – WOOD ROOF FRAMING SECTION R802 – WOOD ROOF FRAMING
648	FIGURE R802.3(1) RIDGE BOARD FIGURE R802.3(1) RIDGE BOARD
649	FIGURE R802.3(2) RIDGE ALTERNATIVE—GUSSET PLATE TIE FIGURE R802.3(2) RIDGE ALTERNATIVE—GUSSET PLATE TIE FIGURE R802.3.1(1) CEILING JOIST AT SUPPORTS FIGURE R802.3.1(1) CEILING JOIST AT SUPPORTS
650	FIGURE R802.3.1(2) ROOF FRAMING WITH CEILING JOISTS NOT PARALLEL TO RAFTERS FIGURE R802.3.1(2) ROOF FRAMING WITH CEILING JOISTS NOT PARALLEL TO RAFTERS FIGURE R802.3.1(3) ROOF FRAMING WITH CEILING JOISTS PARALLEL TO RAFTERS FIGURE R802.3.1(3) ROOF FRAMING WITH CEILING JOISTS PARALLEL TO RAFTERS
651	FIGURE R802.3.2(1) LAPPED CEILING JOIST CONNECTION PROVIDING RESISTANCE TO RAFTER THRUST FIGURE R802.3.2(1) LAPPED CEILING JOIST CONNECTION PROVIDING RESISTANCE TO RAFTER THRUST FIGURE R802.3.2(2) BUTTED CEILING JOIST CONNECTION PROVIDING RESISTANCE TO RAFTER THRUST FIGURE R802.3.2(2) BUTTED CEILING JOIST CONNECTION PROVIDING RESISTANCE TO RAFTER THRUST
652	TABLE R802.4(1) CEILING JOIST SPANS FOR COMMON LUMBER SPECIES (Uninhabitable attics without storage, live load = 10 psf, L/Î” = 240) TABLE R802.4(1) CEILING JOIST SPANS FOR COMMON LUMBER SPECIES (Uninhabitable attics without storage, live load = 10 psf, L/Î” = 240)
653	TABLE R802.4(1)—continued CEILING JOIST SPANS FOR COMMON LUMBER SPECIES TABLE R802.4(1)—continued CEILING JOIST SPANS FOR COMMON LUMBER SPECIES
654	TABLE R802.4(2) CEILING JOIST SPANS FOR COMMON LUMBER SPECIES (Uninhabitable attics with limited storage, live load = 20 psf, L/Î” = 240) TABLE R802.4(2) CEILING JOIST SPANS FOR COMMON LUMBER SPECIES (Uninhabitable attics with limited storage, live load = 20 psf, L/Î” = 240)
655	TABLE R802.4(2)—continued CEILING JOIST SPANS FOR COMMON LUMBER SPECIES(Uninhabitable attics with limited storage, live load = 20 psf, L/Î” = 240) TABLE R802.4(2)—continued CEILING JOIST SPANS FOR COMMON LUMBER SPECIES(Uninhabitable attics with limited storage, live load = 20 psf, L/Î” = 240)
656	TABLE R802.5.1(1) RAFTER SPANS FOR COMMON LUMBER SPECIES (Roof live load=20 psf, ceiling not attached to rafters, L/Î” = 180) TABLE R802.5.1(1) RAFTER SPANS FOR COMMON LUMBER SPECIES (Roof live load=20 psf, ceiling not attached to rafters, L/Î” = 180)
657	TABLE R802.5.1(1)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load=20 psf, ceiling not attached to rafters, L/Î” = 180) TABLE R802.5.1(1)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load=20 psf, ceiling not attached to rafters, L/Î” = 180)
658	TABLE R802.5.1(2) RAFTER SPANS FOR COMMON LUMBER SPECIES (Roof live load=20 psf, ceiling attached to rafters, L/Î” = 240) TABLE R802.5.1(2) RAFTER SPANS FOR COMMON LUMBER SPECIES (Roof live load=20 psf, ceiling attached to rafters, L/Î” = 240)
659	TABLE R802.5.1(2)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load=20 psf, ceiling attached to rafters, L/Î” = 240) TABLE R802.5.1(2)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Roof live load=20 psf, ceiling attached to rafters, L/Î” = 240)
660	TABLE R802.5.1(3) RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=30 psf, ceiling not attached to rafters, L/Î” = 180) TABLE R802.5.1(3) RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=30 psf, ceiling not attached to rafters, L/Î” = 180)
661	TABLE R802.5.1(3)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Ground snow load=30 psf, ceiling not attached to rafters, L/Î” = 180) TABLE R802.5.1(3)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Ground snow load=30 psf, ceiling not attached to rafters, L/Î” = 180)
662	TABLE R802.5.1(4) RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=50 psf, ceiling not attached to rafters, L/Î” = 180) TABLE R802.5.1(4) RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=50 psf, ceiling not attached to rafters, L/Î” = 180)
663	TABLE R802.5.1(4)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Ground snow load=50 psf, ceiling not attached to rafters, L/Î” = 180) TABLE R802.5.1(4)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Ground snow load=50 psf, ceiling not attached to rafters, L/Î” = 180)
664	TABLE R802.5.1(5) RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=30 psf, ceiling attached to rafters, L/Î” = 240) TABLE R802.5.1(5) RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=30 psf, ceiling attached to rafters, L/Î” = 240)
665	TABLE R802.5.1(5)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=30 psf, ceiling attached to rafters, L/Î” = 240) TABLE R802.5.1(5)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=30 psf, ceiling attached to rafters, L/Î” = 240)
666	TABLE R802.5.1(6) RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=50 psf, ceiling attached to rafters, L/Î” = 240) TABLE R802.5.1(6) RAFTER SPANS FOR COMMON LUMBER SPECIES (Ground snow load=50 psf, ceiling attached to rafters, L/Î” = 240)
667	TABLE R802.5.1(6)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Ground snow load=50 psf, ceiling attached to rafters, L/Î” = 240) TABLE R802.5.1(6)—continued RAFTER SPANS FOR COMMON LUMBER SPECIES(Ground snow load=50 psf, ceiling attached to rafters, L/Î” = 240)
668	TABLE R802.5.1(7) RAFTER SPANS FOR 70 PSF GROUND SNOW LOAD (Ceiling not attached to rafters, L/Î” = 180) TABLE R802.5.1(7) RAFTER SPANS FOR 70 PSF GROUND SNOW LOAD (Ceiling not attached to rafters, L/Î” = 180)
669	TABLE R802.5.1(7)—continued RAFTER SPANS FOR 70 PSF GROUND SNOW LOAD TABLE R802.5.1(7)—continued RAFTER SPANS FOR 70 PSF GROUND SNOW LOAD
670	TABLE R802.5.1(8) RAFTER SPANS FOR 70 PSF GROUND SNOW LOAD (Ceiling attached to rafters, L/Î” = 240) TABLE R802.5.1(8) RAFTER SPANS FOR 70 PSF GROUND SNOW LOAD (Ceiling attached to rafters, L/Î” = 240)
671	TABLE R802.5.1(8)—continued RAFTER SPANS FOR 70 PSF GROUND SNOW LOADa TABLE R802.5.1(8)—continued RAFTER SPANS FOR 70 PSF GROUND SNOW LOADa
672	TABLE R802.5.1(9) RAFTER/CEILING JOIST HEEL JOINT CONNECTIONS TABLE R802.5.1(9) RAFTER/CEILING JOIST HEEL JOINT CONNECTIONS
673	FIGURE R802.5.1 BRACED RAFTER CONSTRUCTION FIGURE R802.5.1 BRACED RAFTER CONSTRUCTION
674	FIGURE R802.5.1(1) EXAMPLE OF PURLIN INSTALLATION FIGURE R802.5.1(1) EXAMPLE OF PURLIN INSTALLATION
677	TABLE R802.11 – REQUIRED STRENGTH OF TRUSS OR RAFTER CONNECTIONS TO RESIST WIND UPLIFT FORCES TABLE R802.11 – REQUIRED STRENGTH OF TRUSS OR RAFTER CONNECTIONS TO RESIST WIND UPLIFT FORCES
678	SECTION R803 – ROOF SHEATHING SECTION R803 – ROOF SHEATHING TABLE R803.1 MINIMUM THICKNESS OF LUMBER ROOF SHEATHING TABLE R803.1 MINIMUM THICKNESS OF LUMBER ROOF SHEATHING SECTION R804 – STEEL ROOF FRAMING SECTION R804 – STEEL ROOF FRAMING
679	FIGURE R804.1.2 IN-LINE FRAMING FIGURE R804.1.2 IN-LINE FRAMING
680	TABLE R804.2(1) LOAD-BEARING COLD-FORMED STEEL MEMBER SIZES TABLE R804.2(1) LOAD-BEARING COLD-FORMED STEEL MEMBER SIZES TABLE R804.2(2) MINIMUM THICKNESS OF COLD-FORMED STEEL MEMBERS TABLE R804.2(2) MINIMUM THICKNESS OF COLD-FORMED STEEL MEMBERS FIGURE R804.2(1) C-SHAPED SECTION FIGURE R804.2(1) C-SHAPED SECTION FIGURE R804.2(2) TRACK SECTION FIGURE R804.2(2) TRACK SECTION
681	TABLE R804.2.4 SCREW SUBSTITUTION FACTOR TABLE R804.2.4 SCREW SUBSTITUTION FACTOR
682	FIGURE R804.2.5.1 WEB HOLES FIGURE R804.2.5.1 WEB HOLES FIGURE R804.2.5.3 WEB HOLE PATCH FIGURE R804.2.5.3 WEB HOLE PATCH
683	FIGURE R804.3 STEEL ROOF CONSTRUCTION FIGURE R804.3 STEEL ROOF CONSTRUCTION
684	TABLE R804.3 ROOF FRAMING FASTENING SCHEDULEa, b TABLE R804.3 ROOF FRAMING FASTENING SCHEDULEa, b
685	TABLE R804.3.1.1(1) CEILING JOIST SPANS SINGLE SPANS WITH BEARING STIFFENERS 10 lb per sq ft LIVE LOAD (NO ATTIC STORAGE)a, b, c 33 ksi STEEL TABLE R804.3.1.1(1) CEILING JOIST SPANS SINGLE SPANS WITH BEARING STIFFENERS 10 lb per sq ft LIVE LOAD (NO ATTIC STORAGE)a, b, c 33 ksi STEEL
686	TABLE R804.3.1.1(2) CEILING JOIST SPANS TWO EQUAL SPANS WITH BEARING STIFFENERS 10 lb per sq ft LIVE LOAD (NO ATTIC STORAGE)a, b, c 33 ksi STEEL TABLE R804.3.1.1(2) CEILING JOIST SPANS TWO EQUAL SPANS WITH BEARING STIFFENERS 10 lb per sq ft LIVE LOAD (NO ATTIC STORAGE)a, b, c 33 ksi STEEL
687	TABLE R804.3.1.1(3) CEILING JOIST SPANS SINGLE SPANS WITH BEARING STIFFENERS 20 lb per sq ft LIVE LOAD (LIMITED ATTIC STORAGE)a, b, c 33 ksi STEEL TABLE R804.3.1.1(3) CEILING JOIST SPANS SINGLE SPANS WITH BEARING STIFFENERS 20 lb per sq ft LIVE LOAD (LIMITED ATTIC STORAGE)a, b, c 33 ksi STEEL
688	TABLE R804.3.1.1(4) CEILING JOIST SPANS TWO EQUAL SPANS WITH BEARING STIFFENERS 20 lb per sq ft LIVE LOAD (LIMITED ATTIC STORAGE)a, b, c 33 ksi STEEL TABLE R804.3.1.1(4) CEILING JOIST SPANS TWO EQUAL SPANS WITH BEARING STIFFENERS 20 lb per sq ft LIVE LOAD (LIMITED ATTIC STORAGE)a, b, c 33 ksi STEEL
689	TABLE R804.3.1.1(5) CEILING JOIST SPANS SINGLE SPANS WITHOUT BEARING STIFFENERS 10 lb per sq ft LIVE LOAD (NO ATTIC STORAGE)a, b 33 ksi STEEL TABLE R804.3.1.1(5) CEILING JOIST SPANS SINGLE SPANS WITHOUT BEARING STIFFENERS 10 lb per sq ft LIVE LOAD (NO ATTIC STORAGE)a, b 33 ksi STEEL
690	TABLE R804.3.1.1(6) CEILING JOIST SPANSTWO EQUAL SPANS WITHOUT BEARING STIFFENERS 10 lb per sq ft LIVE LOAD (NO ATTIC STORAGE)a, b 33 ksi STEEL TABLE R804.3.1.1(6) CEILING JOIST SPANSTWO EQUAL SPANS WITHOUT BEARING STIFFENERS 10 lb per sq ft LIVE LOAD (NO ATTIC STORAGE)a, b 33 ksi STEEL
691	TABLE R804.3.1.1(7) CEILING JOIST SPANS SINGLE SPANS WITHOUT BEARING STIFFENERS 20 lb per sq ft LIVE LOAD (LIMITED ATTIC STORAGE)a, b 33 ksi STEEL TABLE R804.3.1.1(7) CEILING JOIST SPANS SINGLE SPANS WITHOUT BEARING STIFFENERS 20 lb per sq ft LIVE LOAD (LIMITED ATTIC STORAGE)a, b 33 ksi STEEL
692	TABLE R804.3.1.1(8) CEILING JOIST SPANS TWO EQUAL SPANS WITHOUT BEARING STIFFENERS 20 lb per sq ft LIVE LOAD (LIMITED ATTIC STORAGE)a, b 33 ksi STEEL TABLE R804.3.1.1(8) CEILING JOIST SPANS TWO EQUAL SPANS WITHOUT BEARING STIFFENERS 20 lb per sq ft LIVE LOAD (LIMITED ATTIC STORAGE)a, b 33 ksi STEEL
693	TABLE R804.3.1.1(9) NUMBER OF SCREWS REQUIRED FOR CEILING JOIST TO ROOF RAFTER CONNECTIONa TABLE R804.3.1.1(9) NUMBER OF SCREWS REQUIRED FOR CEILING JOIST TO ROOF RAFTER CONNECTIONa FIGURE R804.3.1.1(1) JOIST TO RAFTER CONNECTION FIGURE R804.3.1.1(1) JOIST TO RAFTER CONNECTION
694	FIGURE R804.3.1.1(2) BEARING STIFFENER FIGURE R804.3.1.1(2) BEARING STIFFENER
695	FIGURE R804.3.1.4(1) CEILING JOIST TOP FLANGE BRACING WITH C-SHAPE, TRACK OR COLD-ROLLED CHANNEL FIGURE R804.3.1.4(1) CEILING JOIST TOP FLANGE BRACING WITH C-SHAPE, TRACK OR COLD-ROLLED CHANNEL FIGURE R804.3.1.4(2) CEILING JOIST TOP FLANGE BRACING WITH CONTINUOUS STEEL STRAP AND BLOCKING FIGURE R804.3.1.4(2) CEILING JOIST TOP FLANGE BRACING WITH CONTINUOUS STEEL STRAP AND BLOCKING
696	FIGURE R804.3.1.5 SPLICED CEILING JOISTS FIGURE R804.3.1.5 SPLICED CEILING JOISTS
697	TABLE R804.3.2.1(1) ROOF RAFTER SPANSa, b, c 33 ksi STEEL TABLE R804.3.2.1(1) ROOF RAFTER SPANSa, b, c 33 ksi STEEL
698	TABLE R804.3.2.1(2) ROOF RAFTER SPANSa, b, c 50 ksi STEEL TABLE R804.3.2.1(2) ROOF RAFTER SPANSa, b, c 50 ksi STEEL
699	TABLE R804.3.2.1(3) BASIC WIND SPEED TO EQUIVALENT SNOW LOAD CONVERSION TABLE R804.3.2.1(3) BASIC WIND SPEED TO EQUIVALENT SNOW LOAD CONVERSION
700	FIGURE R804.3.2.1.2 GABLE ENDWALL OVERHANG DETAILS FIGURE R804.3.2.1.2 GABLE ENDWALL OVERHANG DETAILS
701	TABLE R804.3.2.4 SCREWS REQUIRED AT EACH LEG OF CLIP ANGLE FOR HIP RAFTERTO HIP MEMBER OR ROOF RAFTER TO RIDGE MEMBER CONNECTIONa TABLE R804.3.2.4 SCREWS REQUIRED AT EACH LEG OF CLIP ANGLE FOR HIP RAFTERTO HIP MEMBER OR ROOF RAFTER TO RIDGE MEMBER CONNECTIONa FIGURE R804.3.2.4 HIP MEMBER OF RIDGE MEMBER CONNECTION FIGURE R804.3.2.4 HIP MEMBER OF RIDGE MEMBER CONNECTION
702	TABLE R804.3.3.2 HIP MEMBER SIZES, 33 ksi STEEL TABLE R804.3.3.2 HIP MEMBER SIZES, 33 ksi STEEL
703	TABLE R804.3.3.3 HIP SUPPORT COLUMN SIZES TABLE R804.3.3.3 HIP SUPPORT COLUMN SIZES
704	TABLE R804.3.3.4(1) UPLIFT STRAP CONNECTION REQUIREMENTS HIP SUPPORT COLUMN AT CEILING LINE TABLE R804.3.3.4(1) UPLIFT STRAP CONNECTION REQUIREMENTS HIP SUPPORT COLUMN AT CEILING LINE FIGURE R804.3.3.4(1) JACK RAFTER CONNECTION AT EAVE FIGURE R804.3.3.4(1) JACK RAFTER CONNECTION AT EAVE
705	TABLE R804.3.3.4(2) CONNECTION REQUIREMENTS HIP MEMBER TO HIP SUPPORT COLUMN TABLE R804.3.3.4(2) CONNECTION REQUIREMENTS HIP MEMBER TO HIP SUPPORT COLUMN FIGURE R804.3.3.4(2) HIP SUPPORT COLUMN FIGURE R804.3.3.4(2) HIP SUPPORT COLUMN
706	TABLE R804.3.3.4(3) UPLIFT STRAP CONNECTION REQUIREMENTS HIP MEMBER TO WALL TABLE R804.3.3.4(3) UPLIFT STRAP CONNECTION REQUIREMENTS HIP MEMBER TO WALL FIGURE R804.3.3.4(3) HIP CONNECTIONS AT RIDGE FIGURE R804.3.3.4(3) HIP CONNECTIONS AT RIDGE
707	FIGURE R804.3.3.4(4) HIP CONNECTIONS AT RIDGE AND COX COLUMN FIGURE R804.3.3.4(4) HIP CONNECTIONS AT RIDGE AND COX COLUMN
708	FIGURE R804.3.3.4(5) HIP MEMBER CONNECTION AT WALL CORNER FIGURE R804.3.3.4(5) HIP MEMBER CONNECTION AT WALL CORNER FIGURE R804.3.6(1) ROOF OR CEILING OPENING FIGURE R804.3.6(1) ROOF OR CEILING OPENING
709	FIGURE R804.3.6(2) HEADER TO TRIMMER CONNECTION FIGURE R804.3.6(2) HEADER TO TRIMMER CONNECTION
710	TABLE R804.3.8(1) REQUIRED LENGTHS FOR CEILING DIAPHRAGMS AT GABLE ENDWALLS GYPSUM BOARD SHEATHED, CEILING HEIGHT = 8 FT a, b, c, d, e, f TABLE R804.3.8(1) REQUIRED LENGTHS FOR CEILING DIAPHRAGMS AT GABLE ENDWALLS GYPSUM BOARD SHEATHED, CEILING HEIGHT = 8 FT a, b, c, d, e, f FIGURE R804.3.8(1) CEILING DIAPHRAGM TO GABLE ENDWALL DETAIL FIGURE R804.3.8(1) CEILING DIAPHRAGM TO GABLE ENDWALL DETAIL
711	TABLE R804.3.8(2) REQUIRED LENGTHS FOR CEILING DIAPHRAGMS AT GABLE ENDWALLS GYPSUM BOARD SHEATHED CEILING HEIGHT = 9 OR 10 FTa, b, c, d, e, f TABLE R804.3.8(2) REQUIRED LENGTHS FOR CEILING DIAPHRAGMS AT GABLE ENDWALLS GYPSUM BOARD SHEATHED CEILING HEIGHT = 9 OR 10 FTa, b, c, d, e, f FIGURE R804.3.8(2) CEILING DIAPHRAGM TO SIDEWALL DETAIL FIGURE R804.3.8(2) CEILING DIAPHRAGM TO SIDEWALL DETAIL
712	TABLE R804.3.8(3) REQUIRED LENGTHS FOR CEILING DIAPHRAGMS AT GABLE ENDWALLS WOOD STRUCTURAL PANEL SHEATHED CEILING HEIGHT = 8, 9 OR 10 FTa, b, c, d TABLE R804.3.8(3) REQUIRED LENGTHS FOR CEILING DIAPHRAGMS AT GABLE ENDWALLS WOOD STRUCTURAL PANEL SHEATHED CEILING HEIGHT = 8, 9 OR 10 FTa, b, c, d
713	FIGURE R804.3.8(3) ROOF LOCKING DETAIL FIGURE R804.3.8(3) ROOF LOCKING DETAIL SECTION R805 – CEILING FINISHES SECTION R805 – CEILING FINISHES SECTION R806 – ROOF VENTILATION SECTION R806 – ROOF VENTILATION
715	TABLE R806.4 INSULATION FOR CONDENSATION CONTROL TABLE R806.4 INSULATION FOR CONDENSATION CONTROL
716	SECTION R807 – ATTIC ACCESS SECTION R807 – ATTIC ACCESS BIBLIOGRAPHY BIBLIOGRAPHY
717	CHAPTER 9: ROOF ASSEMBLIES CHAPTER 9: ROOF ASSEMBLIES GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION R901 – GENERAL SECTION R901 – GENERAL SECTION R902 – ROOF CLASSIFICATION SECTION R902 – ROOF CLASSIFICATION
718	SECTION R903 – WEATHER PROTECTION SECTION R903 – WEATHER PROTECTION
720	FIGURE R903.5 HAIL EXPOSURE MAP FIGURE R903.5 HAIL EXPOSURE MAP
721	SECTION R904 – MATERIALS SECTION R904 – MATERIALS SECTION R905 – REQUIREMENTS FOR ROOF COVERINGS SECTION R905 – REQUIREMENTS FOR ROOF COVERINGS
722	FIGURE R905.2.2(1) ASPHALT ROOFING SHINGLES APPLICATION HIGH SLOPE (4:12 MINIMUM) FIGURE R905.2.2(1) ASPHALT ROOFING SHINGLES APPLICATION HIGH SLOPE (4:12 MINIMUM) FIGURE R905.2.2(2) APPLICATION OF ASPHALT SHINGLE SLOPES BETWEEN 2:12 AND 4:12 FIGURE R905.2.2(2) APPLICATION OF ASPHALT SHINGLE SLOPES BETWEEN 2:12 AND 4:12
723	TABLE R905.2.4.1(1) CLASSIFICATION OF ASPHALT ROOF SHINGLES PER ASTM D 7158 TABLE R905.2.4.1(1) CLASSIFICATION OF ASPHALT ROOF SHINGLES PER ASTM D 7158 TABLE R905.2.4.1(2) CLASSIFICATION OF ASPHALT SHINGLES PER ASTM D 3161 TABLE R905.2.4.1(2) CLASSIFICATION OF ASPHALT SHINGLES PER ASTM D 3161
725	FIGURE R905.2.7 LOW-SLOPE DOUBLE-PLY UNDERLAYMENT APPLICATION FIGURE R905.2.7 LOW-SLOPE DOUBLE-PLY UNDERLAYMENT APPLICATION
726	FIGURE R905.2.7.1(1) POSSIBLE WATER DAMAGE FROM AN ICE DAM FIGURE R905.2.7.1(1) POSSIBLE WATER DAMAGE FROM AN ICE DAM FIGURE R905.2.7.1(2) PROTECTIVE ICE BARRIER FIGURE R905.2.7.1(2) PROTECTIVE ICE BARRIER
727	TABLE R905.2.8.2 VALLEY LINING MATERIAL TABLE R905.2.8.2 VALLEY LINING MATERIAL FIGURE R905.2.8.2(1) FLASHING FOR OPEN ROOF VALLEY FIGURE R905.2.8.2(1) FLASHING FOR OPEN ROOF VALLEY FIGURE R905.2.8.2(2) FLASHING FOR WOVEN VALLEY FIGURE R905.2.8.2(2) FLASHING FOR WOVEN VALLEY
728	FIGURE R905.2.8.3 FLASHING AT SIDE WALL FIGURE R905.2.8.3 FLASHING AT SIDE WALL FIGURE R905.2.8.4 CHIMNEY FLASHING DETAIL FIGURE R905.2.8.4 CHIMNEY FLASHING DETAIL
729	FIGURE R905.3 ROLL AND FLAT TILE EXAMPLES FIGURE R905.3 ROLL AND FLAT TILE EXAMPLES
730	TABLE R905.3.7 CLAY AND CONCRETE TILE ATTACHMENT TABLE R905.3.7 CLAY AND CONCRETE TILE ATTACHMENT
731	FIGURE R905.3.7(1) APPLICATION OF ROLL TILE FIGURE R905.3.7(1) APPLICATION OF ROLL TILE FIGURE R905.3.7(2) TILE ROOF GABLE RAKE SECTION FIGURE R905.3.7(2) TILE ROOF GABLE RAKE SECTION
732	FIGURE R905.2.7(3) TILE ROOF EAVE SECTION FIGURE R905.2.7(3) TILE ROOF EAVE SECTION FIGURE R905.3.7(4) TILE ROOF RIDGE SECTION FIGURE R905.3.7(4) TILE ROOF RIDGE SECTION
733	FIGURE R905.3.8(1) TILE ROOF FLASHING AT VALLEY FIGURE R905.3.8(1) TILE ROOF FLASHING AT VALLEY FIGURE R905.3.8(2) TILE ROOF FLASHING AT ROOF ABUTTING CHIMNEY/WALL FIGURE R905.3.8(2) TILE ROOF FLASHING AT ROOF ABUTTING CHIMNEY/WALL FIGURE R905.3.8(3) TILE ROOF CHIMNEY FLASHING DETAIL FIGURE R905.3.8(3) TILE ROOF CHIMNEY FLASHING DETAIL FIGURE R905.3.8(4) TILE ROOF FLASHING FOR A VENT PIPE FIGURE R905.3.8(4) TILE ROOF FLASHING FOR A VENT PIPE
736	TABLE R905.6.5 SLATE SHINGLE HEADLAP TABLE R905.6.5 SLATE SHINGLE HEADLAP
737	TABLE R905.7.4 WOOD SHINGLE MATERIAL REQUIREMENTS TABLE R905.7.4 WOOD SHINGLE MATERIAL REQUIREMENTS FIGURE R905.7.4 WOOD SHINGLE GRADE DESCRIPTION AND EXAMPLE LABEL FIGURE R905.7.4 WOOD SHINGLE GRADE DESCRIPTION AND EXAMPLE LABEL
738	FIGURE R905.7.5(1) WOOD SHINGLE APPLICATION FIGURE R905.7.5(1) WOOD SHINGLE APPLICATION FIGURE R905.7.5(2) FASTENER PENETRATION FIGURE R905.7.5(2) FASTENER PENETRATION
739	TABLE R905.7.5 WOOD SHINGLE WEATHER EXPOSURE AND ROOF SLOPE TABLE R905.7.5 WOOD SHINGLE WEATHER EXPOSURE AND ROOF SLOPE FIGURE R905.7.6 WOOD SHINGLE VALLEY FLASHING FIGURE R905.7.6 WOOD SHINGLE VALLEY FLASHING
740	TABLE R905.8.5 WOOD SHAKE MATERIAL REQUIREMENTS TABLE R905.8.5 WOOD SHAKE MATERIAL REQUIREMENTS
741	TABLE R905.8.6 WOOD SHAKE WEATHER EXPOSURE AND ROOF SLOPE TABLE R905.8.6 WOOD SHAKE WEATHER EXPOSURE AND ROOF SLOPE
742	FIGURE R905.8.6 WOOD SHAKE APPLICATION FIGURE R905.8.6 WOOD SHAKE APPLICATION FIGURE R905.8.7 WOOD SHAKE APPLICATION ON ROOFS WITH SLOPES NOT LESS THAN 3 IN 12 FIGURE R905.8.7 WOOD SHAKE APPLICATION ON ROOFS WITH SLOPES NOT LESS THAN 3 IN 12
743	FIGURE R905.8.9 WOOD SHAKE DESCRIPTION AND EXAMPLE LABELS FIGURE R905.8.9 WOOD SHAKE DESCRIPTION AND EXAMPLE LABELS
744	TABLE R905.9.2 BUILT-UP ROOFING MATERIAL STANDARDS TABLE R905.9.2 BUILT-UP ROOFING MATERIAL STANDARDS
745	FIGURE R905.9.3(1) BUILT-UP ROOF—NAILABLE DECK APPLICATION FIGURE R905.9.3(1) BUILT-UP ROOF—NAILABLE DECK APPLICATION
746	FIGURE R905.9.3(2) BUILT-UP ROOF-APPLICATION TO NONNAILABLE DECK BY SPOT MOPPING FIGURE R905.9.3(2) BUILT-UP ROOF-APPLICATION TO NONNAILABLE DECK BY SPOT MOPPING FIGURE R905.9.3(3) BUILT-UP-APPLICATION TO NONNAILABLE DECK BY SOLID MOPPING FIGURE R905.9.3(3) BUILT-UP-APPLICATION TO NONNAILABLE DECK BY SOLID MOPPING
747	TABLE R905.10.3(1) METAL ROOF COVERINGS STANDARDS TABLE R905.10.3(1) METAL ROOF COVERINGS STANDARDS
748	TABLE R905.10.3(2) MINIMUM CORROSION RESISTANCE TABLE R905.10.3(2) MINIMUM CORROSION RESISTANCE TABLE R905.11.2 MODIFIED BITUMEN ROOFING MATERIAL STANDARDS TABLE R905.11.2 MODIFIED BITUMEN ROOFING MATERIAL STANDARDS
750	SECTION R906 – ROOF INSULATION SECTION R906 – ROOF INSULATION TABLE R906.2 MATERIAL STANDARDS FOR ROOF INSULATION TABLE R906.2 MATERIAL STANDARDS FOR ROOF INSULATION
751	SECTION R907 – REROOFING SECTION R907 – REROOFING
752	BIBLIOGRAPHY BIBLIOGRAPHY
757	CHAPTER 10: CHIMNEYS AND FIREPLACES CHAPTER 10: CHIMNEYS AND FIREPLACES GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION R1001 – MASONRY FIREPLACES SECTION R1001 – MASONRY FIREPLACES
758	TABLE R1001.1 SUMMARY OF REQUIREMENTS FOR MASONRY FIREPLACES AND CHIMNEYS TABLE R1001.1 SUMMARY OF REQUIREMENTS FOR MASONRY FIREPLACES AND CHIMNEYS
759	FIGURE R1001.1 FIREPLACE AND CHIMNEY DETAILS FIGURE R1001.1 FIREPLACE AND CHIMNEY DETAILS
761	FIGURE R1001.6(1) SECTION THROUGH FIREPLACE FIGURE R1001.6(1) SECTION THROUGH FIREPLACE
762	FIGURE R1001.6(2) RUMFORD FIREPLACE FIGURE R1001.6(2) RUMFORD FIREPLACE
764	SECTION R1002 – MASONRY HEATERS SECTION R1002 – MASONRY HEATERS FIGURE R1001.11 CLEARANCE FROM COMBUSTIBLES FIGURE R1001.11 CLEARANCE FROM COMBUSTIBLES
765	SECTION R1003 – MASONRY CHIMNEYS SECTION R1003 – MASONRY CHIMNEYS
766	FIGURE R1003.2 TYPICAL MASONRY CHIMNEY FIGURE R1003.2 TYPICAL MASONRY CHIMNEY
767	FIGURE R1003.5(1) INDIVIDUAL CORBELS FIGURE R1003.5(1) INDIVIDUAL CORBELS FIGURE R1003.5(2) CORBELING FROM FOUNDATION WALL FIGURE R1003.5(2) CORBELING FROM FOUNDATION WALL
770	FIGURE R1003.12 MULTIPLE FLUES FIGURE R1003.12 MULTIPLE FLUES
771	TABLE R1003.14(1) NET CROSS–SECTIONAL AREA OF ROUND FLUE SIZESa TABLE R1003.14(1) NET CROSS–SECTIONAL AREA OF ROUND FLUE SIZESa TABLE R1003.14(2) NET CROSS–SECTIONAL AREA OF SQUARE AND RECTANGULAR FLUE SIZES TABLE R1003.14(2) NET CROSS–SECTIONAL AREA OF SQUARE AND RECTANGULAR FLUE SIZES FIGURE R1003.15.1 MULTIPLE FLUES FIGURE R1003.15.1 MULTIPLE FLUES
772	FIGURE R1003.15.2 FLUE SIZES FOR MASONRY CHIMNEYS FIGURE R1003.15.2 FLUE SIZES FOR MASONRY CHIMNEYS
773	FIGURE R1003.16 CHIMNEY WITH INLET–MINIMUM CLEARANCES TO COMBUSTIBLE FIRESTOPPING FIGURE R1003.16 CHIMNEY WITH INLET–MINIMUM CLEARANCES TO COMBUSTIBLE FIRESTOPPING
774	TABLE R1003.20 CRICKET DIMENSIONS TABLE R1003.20 CRICKET DIMENSIONS FIGURE R1003.18 CLEARANCE FROM COMBUSTIBLES FIGURE R1003.18 CLEARANCE FROM COMBUSTIBLES
775	FIGURE R1003.20 CHIMNEY CRICKET FIGURE R1003.20 CHIMNEY CRICKET SECTION R1004 – FACTORY-BUILT FIREPLACES SECTION R1004 – FACTORY-BUILT FIREPLACES SECTION R1005 – FACTORY-BUILT CHIMNEYS SECTION R1005 – FACTORY-BUILT CHIMNEYS
776	FIGURE R1005.6 EXAMPLE OF FACTORY-BUILT FIREPLACE AND CHIMNEY FIGURE R1005.6 EXAMPLE OF FACTORY-BUILT FIREPLACE AND CHIMNEY SECTION R1006 – EXTERIOR AIR SUPPLY SECTION R1006 – EXTERIOR AIR SUPPLY
779	PART IV – ENERGY CONSERVATION PART IV – ENERGY CONSERVATION CHAPTER 11: ENERGY EFFICIENCY CHAPTER 11: ENERGY EFFICIENCY GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION N1101 – GENERAL SECTION N1101 – GENERAL
780	FIGURE N1101.1(1) CONDITIONED ENVELOPE FIGURE N1101.1(1) CONDITIONED ENVELOPE FIGURE N1101.1(2) BUILDING ENVELOPE FIGURE N1101.1(2) BUILDING ENVELOPE
781	FIGURE N1101.2 CLIMATE ZONES FIGURE N1101.2 CLIMATE ZONES
782	TABLE N1101.2 CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE N1101.2 CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
783	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
784	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
785	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
786	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
787	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
788	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITO TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITO
789	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
790	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITOR TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITOR
791	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITO TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITO
792	TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE N1101.2—continued CLIMATE ZONES, MOISTURE REGIMES AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
793	FIGURE N1101.3(1) INSULATION R-VALUE STAMP FIGURE N1101.3(1) INSULATION R-VALUE STAMP FIGURE N1101.3(2) NATIONAL FENESTRATION RATING COUNCIL LABEL FIGURE N1101.3(2) NATIONAL FENESTRATION RATING COUNCIL LABEL
794	TABLE N1101.5(1) DEFAULT GLAZED FENESTRATION U-FACTORS TABLE N1101.5(1) DEFAULT GLAZED FENESTRATION U-FACTORS TABLE N1101.5(2) DEFAULT DOOR U-FACTORS TABLE N1101.5(2) DEFAULT DOOR U-FACTORS TABLE N1101.5(3) DEFAULT GLAZED FENESTRATION SHGC TABLE N1101.5(3) DEFAULT GLAZED FENESTRATION SHGC
796	FIGURE N1101.9 CERTIFICATE FIGURE N1101.9 CERTIFICATE
797	SECTION N1102 – BUILDING THERMAL ENVELOPE SECTION N1102 – BUILDING THERMAL ENVELOPE
798	TABLE N1102.1 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENTa TABLE N1102.1 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENTa
799	FIGURE N1102.1.1 EXTERIOR R-VALUES FIGURE N1102.1.1 EXTERIOR R-VALUES
800	TABLE N1102.1.2 EQUIVALENT U-FACTOR TABLE N1102.1.2 EQUIVALENT U-FACTOR
802	FIGURE N1102.2.1(1) TYPICAL ROOF ASSEMBLY FIGURE N1102.2.1(1) TYPICAL ROOF ASSEMBLY
803	FIGURE N1102.2.1(2) RAISED-HEEL TRUSS FIGURE N1102.2.1(2) RAISED-HEEL TRUSS
804	FIGURE 1102.2.4(1) EXTERIOR INSULATION FIGURE 1102.2.4(1) EXTERIOR INSULATION FIGURE 1102.2.4(2) INTERIOR INSULATION FIGURE 1102.2.4(2) INTERIOR INSULATION
805	TABLE N1102.2.5 STEEL-FRAME CEILING, WALL AND FLOOR INSULATION (R-VALUE) TABLE N1102.2.5 STEEL-FRAME CEILING, WALL AND FLOOR INSULATION (R-VALUE)
806	FIGURE N1102.2.7(1) WALK-OUT BASEMENT FIGURE N1102.2.7(1) WALK-OUT BASEMENT
807	FIGURE N1102.2.7(2) WALK-OUT BASEMENT FIGURE N1102.2.7(2) WALK-OUT BASEMENT
808	FIGURE N1102.2.8 SLAB-EDGE INSULATION METHODS FIGURE N1102.2.8 SLAB-EDGE INSULATION METHODS
809	FIGURE N1102.2.9 CRAWL SPACE WALL INSULATION FIGURE N1102.2.9 CRAWL SPACE WALL INSULATION
813	FIGURE N1102.4 TYPICAL SOURCES OF AIR LEAKAGE FIGURE N1102.4 TYPICAL SOURCES OF AIR LEAKAGE
815	TABLE N1102.4.2 AIR BARRIER AND INSULATION INSPECTION TABLE N1102.4.2 AIR BARRIER AND INSULATION INSPECTION
816	SECTION N1103 – SYSTEMS SECTION N1103 – SYSTEMS FIGURE N1102.4.3 IC-RATED RECESSED LIGHT FIGURE N1102.4.3 IC-RATED RECESSED LIGHT
819	SECTION N1104 LIGHTING SYSTEMS SECTION N1104 LIGHTING SYSTEMS BIBLIOGRAPHY BIBLIOGRAPHY
821	INDEX INDEX
833	ICC MEMBERSHIP BENEFITS ICC MEMBERSHIP BENEFITS
834	MUST HAVE TOOLS FOR YOUR IRC® MUST HAVE TOOLS FOR YOUR IRC®
835	NEW GUIDELINES FOR GOING GREEN NEW GUIDELINES FOR GOING GREEN
836	GO-TO RESOURCES FOR YOU I-CODE GO-TO RESOURCES FOR YOU I-CODE
837	2009 INTERNATIONAL RESIDENTIAL CODE® AND COMMENTARY VOLUME II 2009 INTERNATIONAL RESIDENTIAL CODE® AND COMMENTARY VOLUME II
838	COPYRIGHT©2010 COPYRIGHT©2010
839	PREFACE PREFACE
841	TABLE OF CONTENTS TABLE OF CONTENTS
845	PART V – MECHANICAL PART V – MECHANICAL CHAPTER 12: MECHANICAL ADMINISTRATION CHAPTER 12: MECHANICAL ADMINISTRATION GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M1201 – GENERAL SECTION M1201 – GENERAL SECTION M1202 – EXISTING MECHANICAL SYSTEMS SECTION M1202 – EXISTING MECHANICAL SYSTEMS
846	BIBLIOGRAPHY BIBLIOGRAPHY
847	CHAPTER 13: GENERAL MECHANICAL SYSTEM REQUIREMENTS CHAPTER 13: GENERAL MECHANICAL SYSTEM REQUIREMENTS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M1301 – GENERAL SECTION M1301 – GENERAL SECTION M1302 – APPROVAL SECTION M1302 – APPROVAL
848	SECTION M1303 – LABELING OF APPLIANCES SECTION M1303 – LABELING OF APPLIANCES SECTION M1304 – TYPE OF FUEL SECTION M1304 – TYPE OF FUEL
849	FIGURE M1303.1 – TYPICAL LABEL FOR A CATEGORY I GAS-FIRED FURNACE(Courtesy of The Trane Company, and American Standard Company) FIGURE M1303.1 – TYPICAL LABEL FOR A CATEGORY I GAS-FIRED FURNACE(Courtesy of The Trane Company, and American Standard Company) SECTION M1305 – APPLIANCE ACCESS SECTION M1305 – APPLIANCE ACCESS
851	FIGURE M1305.1.3 – REMOTE LOCATION REQUIREMENTS (ATTIC INSTALLATION) FIGURE M1305.1.3 – REMOTE LOCATION REQUIREMENTS (ATTIC INSTALLATION)
852	SECTION M1306 – CLEARANCES FROM COMBUSTIBLE CONSTRUCTION SECTION M1306 – CLEARANCES FROM COMBUSTIBLE CONSTRUCTION FIGURE M1306.1 – REDUCED CLEARANCE DIAGRAM FIGURE M1306.1 – REDUCED CLEARANCE DIAGRAM
853	FIGURE M1306.2 – WALL PROTECTOR CLEARANCE REDUCTION SYSTEM FIGURE M1306.2 – WALL PROTECTOR CLEARANCE REDUCTION SYSTEM
854	SECTION M1307 – APPLIANCE INSTALLATION SECTION M1307 – APPLIANCE INSTALLATION
855	TABLE M1306.2 – REDUCTION OF CLEARANCES WITH SPECIFIED FORMS OF PROTECTIONa, c, d, e, f, g, h, I, j, k, l TABLE M1306.2 – REDUCTION OF CLEARANCES WITH SPECIFIED FORMS OF PROTECTIONa, c, d, e, f, g, h, I, j, k, l
856	FIGURE M1307.2 – ANCHORAGE OF WATER HEATER FIGURE M1307.2 – ANCHORAGE OF WATER HEATER
857	FIGURE M1307.3 – OIL-FIRED WATER HEATER INSTALLATION IN A GARAGE FIGURE M1307.3 – OIL-FIRED WATER HEATER INSTALLATION IN A GARAGE
858	FIGURE M1307.3.1 – TYPICAL MOTOR VEHICLE IMPACT PROTECTION FIGURE M1307.3.1 – TYPICAL MOTOR VEHICLE IMPACT PROTECTION
859	SECTION M1308 – MECHANICAL SYSTEMS INSTALLATION SECTION M1308 – MECHANICAL SYSTEMS INSTALLATION
860	FIGURE M1308.2 – PIPE PROTECTION FIGURE M1308.2 – PIPE PROTECTION BIBLIOGRAPHY BIBLIOGRAPHY
863	CHAPTER 14: HEATING AND COOLING EQUIPMENT CHAPTER 14: HEATING AND COOLING EQUIPMENT GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M1401 – GENERAL SECTION M1401 – GENERAL
864	SECTION M1402 – CENTRAL FURNACES SECTION M1402 – CENTRAL FURNACES SECTION M1403 – HEAT PUMP EQUIPMENT SECTION M1403 – HEAT PUMP EQUIPMENT
865	SECTION M1404 – REFRIGERATION COOLING EQUIPMENT SECTION M1404 – REFRIGERATION COOLING EQUIPMENT SECTION M1405 – BASEBOARD CONVECTORS SECTION M1405 – BASEBOARD CONVECTORS SECTION M1406 – RADIANT HEATING SYSTEMS SECTION M1406 – RADIANT HEATING SYSTEMS FIGURE M1405.1 – TYPICAL ELECTRICAL BASEBOARD CONVECTOR FIGURE M1405.1 – TYPICAL ELECTRICAL BASEBOARD CONVECTOR
866	SECTION M1407 – DUCT HEATERS SECTION M1407 – DUCT HEATERS SECTION M1408 – VENTED FLOOR FURNACES SECTION M1408 – VENTED FLOOR FURNACES
867	FIGURE M1408.3 FLOOR FURNACE CLEARANCES FIGURE M1408.3 FLOOR FURNACE CLEARANCES
868	SECTION M1409 – VENTED WALL FURNACES SECTION M1409 – VENTED WALL FURNACES SECTION M1410 – VENTED ROOM HEATERS SECTION M1410 – VENTED ROOM HEATERS
869	SECTION M1411 – HEATING AND COOLING EQUIPMENT SECTION M1411 – HEATING AND COOLING EQUIPMENT
870	FIGURE M1411.3.1(1) – CONDENSATE OVERFLOW SHUTOFF SWITCH INSTALLED IN A PAN FIGURE M1411.3.1(1) – CONDENSATE OVERFLOW SHUTOFF SWITCH INSTALLED IN A PAN FIGURE M1411.3.1(2) – CONDENSATE OVERFLOW SHUTOFF SWITCH INSTALLED IN THE OVERFLOW DRAIN LINE FIGURE M1411.3.1(2) – CONDENSATE OVERFLOW SHUTOFF SWITCH INSTALLED IN THE OVERFLOW DRAIN LINE
871	FIGURE M1411.3.1(3) – CONDENSATE OVERFLOW SHUTOFF SWITCH INSTALLED IN THE OUTLET OF THE AUXILIARY PAN FIGURE M1411.3.1(3) – CONDENSATE OVERFLOW SHUTOFF SWITCH INSTALLED IN THE OUTLET OF THE AUXILIARY PAN FIGURE M1411.3.3(1) – UNACCEPTABLE APPLIANCE AND PAN INSTALLATION FIGURE M1411.3.3(1) – UNACCEPTABLE APPLIANCE AND PAN INSTALLATION
872	FIGURE M1411.3.3(2) – ACCEPTABLE APPLIANCE AND PAN INSTALLATION FIGURE M1411.3.3(2) – ACCEPTABLE APPLIANCE AND PAN INSTALLATION SECTION M1412 – ABSORPTION COOLING EQUIPMENT SECTION M1412 – ABSORPTION COOLING EQUIPMENT
873	FIGURE M1411.6(1) – INSTALLATION OF LOCKING CAPS FOR REFRIGERANT ACCESS PORT FIGURE M1411.6(1) – INSTALLATION OF LOCKING CAPS FOR REFRIGERANT ACCESS PORT FIGURE M1411.6(2) – REFRIGERANT LOCKING CAPS AND TOOLS FIGURE M1411.6(2) – REFRIGERANT LOCKING CAPS AND TOOLS FIGURE M1411.6(3) – REFRIGERANT LABELS FOR LOCKING CAPS FIGURE M1411.6(3) – REFRIGERANT LABELS FOR LOCKING CAPS FIGURE M1411.6(4) – SPECIAL REMOVAL TOOLS FOR REFRIGERANT LOCKING CAPS FIGURE M1411.6(4) – SPECIAL REMOVAL TOOLS FOR REFRIGERANT LOCKING CAPS SECTION M1413 – EVAPORATIVE COOLING EQUIPMENT SECTION M1413 – EVAPORATIVE COOLING EQUIPMENT
874	SECTION 1414 – FIREPLACE STOVES SECTION 1414 – FIREPLACE STOVES SECTION M1415 – MASONRY HEATERS SECTION M1415 – MASONRY HEATERS BIBLIOGRAPHY BIBLIOGRAPHY
875	CHAPTER 15: EXHAUST SYSTEMS CHAPTER 15: EXHAUST SYSTEMS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M1501 GENERAL SECTION M1501 GENERAL
876	SECTION M1502 CLOTHES DRYER EXHAUST SECTION M1502 CLOTHES DRYER EXHAUST
878	TABLE M1502.4.4.1 DRYER EXHAUST DUCT FITTING EQUIVALENT LENGTH TABLE M1502.4.4.1 DRYER EXHAUST DUCT FITTING EQUIVALENT LENGTH
879	SECTION M1503 RANGE HOODS SECTION M1503 RANGE HOODS FIGURE M1502.4.5 EXAMPLE OF A DRYER EXHAUST LENGTH LABEL FIGURE M1502.4.5 EXAMPLE OF A DRYER EXHAUST LENGTH LABEL
880	SECTION M1504 INSTALLATION OF MICROWAVE OVENS SECTION M1504 INSTALLATION OF MICROWAVE OVENS SECTION M1505 OVERHEAD EXHAUST HOODS SECTION M1505 OVERHEAD EXHAUST HOODS
881	SECTION M1506 EXHAUST DUCTS SECTION M1506 EXHAUST DUCTS SECTION M1507 MECHANICAL VENTILATION SECTION M1507 MECHANICAL VENTILATION TABLE M1507.3 MINIMUM REQUIRED EXHAUST RATES FOR ONE- AND TWO-FAMILY DWELLINGS TABLE M1507.3 MINIMUM REQUIRED EXHAUST RATES FOR ONE- AND TWO-FAMILY DWELLINGS BIBLIOGRAPHY BIBLIOGRAPHY
883	CHAPTER 16: DUCT SYSTEMS CHAPTER 16: DUCT SYSTEMS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M1601 – DUCT CONSTRUCTION SECTION M1601 – DUCT CONSTRUCTION
885	TABLE M1601.1.1(1) – CLASSIFICATION OF FACTORY-MADE AIR DUCTS TABLE M1601.1.1(1) – CLASSIFICATION OF FACTORY-MADE AIR DUCTS TABLE M1601.1.1(2) – GAGES OF METAL DUCTS AND PLENUMS USED FOR HEATING OR COOLING TABLE M1601.1.1(2) – GAGES OF METAL DUCTS AND PLENUMS USED FOR HEATING OR COOLING
886	FIGURE M1601.1.1(1) – ACCEPTABLE STUD AND JOIST-SPACE INSTALLATION FIGURE M1601.1.1(1) – ACCEPTABLE STUD AND JOIST-SPACE INSTALLATION
887	FIGURE M1601.1.1(2) – UNACCEPTABLE STUD AND JOIST-SPACE PLENUM INSTALLATION FIGURE M1601.1.1(2) – UNACCEPTABLE STUD AND JOIST-SPACE PLENUM INSTALLATION
891	FIGURE M1601.4.1 – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council) FIGURE M1601.4.1 – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council)
892	FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council) FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council)
893	FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council) FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council)
894	FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council) FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council)
895	FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council) FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council)
896	FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council) FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council)
897	FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council) FIGURE M1601.4.1—continued – INSTALLATION INSTRUCTIONS FOR FLEXIBLE AIR DUCTS AND AIR CONNECTORS(Courtesy of Air Diffusion Council)
898	FIGURE M1601.5 – UNDER-FLOOR PLENUM FIGURE M1601.5 – UNDER-FLOOR PLENUM
899	SECTION M1602 – RETURN AIR SECTION M1602 – RETURN AIR
900	BIBLIOGRAPHY BIBLIOGRAPHY
901	CHAPTER 17: COMBUSTION AIR CHAPTER 17: COMBUSTION AIR GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M1701 – GENERAL SECTION M1701 – GENERAL
902	BIBLIOGRAPHY BIBLIOGRAPHY
903	CHAPTER 18: CHIMNEYS AND VENTS CHAPTER 18: CHIMNEYS AND VENTS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M1801 – GENERAL SECTION M1801 – GENERAL
906	FIGURE M1801.7 – VENT SUPPORT FIGURE M1801.7 – VENT SUPPORT
907	SECTION M1802 – VENT COMPONENTS SECTION M1802 – VENT COMPONENTS FIGURE M1802.3 – DRAFT HOODS AND DRAFT REGULATORS FIGURE M1802.3 – DRAFT HOODS AND DRAFT REGULATORS
908	SECTION M1803 – CHIMNEY AND VENT CONNECTORS SECTION M1803 – CHIMNEY AND VENT CONNECTORS TABLE M1803.2 – THICKNESS FOR SINGLE-WALL METAL PIPE CONNECTORS TABLE M1803.2 – THICKNESS FOR SINGLE-WALL METAL PIPE CONNECTORS
909	TABLE M1803.3.4 – CHIMNEY AND VENT CONNECTOR CLEARANCES TO COMBUSTIBLE MATERIALSa TABLE M1803.3.4 – CHIMNEY AND VENT CONNECTOR CLEARANCES TO COMBUSTIBLE MATERIALSa
910	SECTION M1804 – VENTS SECTION M1804 – VENTS TABLE M1804.1 – VENT SELECTION CHART TABLE M1804.1 – VENT SELECTION CHART
911	FIGURE M1804.2.1 – VENT TERMINATION THROUGH A ROOF FIGURE M1804.2.1 – VENT TERMINATION THROUGH A ROOF
913	SECTION M1805 – MASONRY AND FACTORY-BUILT CHIMNEYS SECTION M1805 – MASONRY AND FACTORY-BUILT CHIMNEYS BIBLIOGRAPHY BIBLIOGRAPHY
915	CHAPTER 19: SPECIAL FUEL-BURNING EQUIPMENT CHAPTER 19: SPECIAL FUEL-BURNING EQUIPMENT GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M1901 – RANGES AND OVENS SECTION M1901 – RANGES AND OVENS SECTION M1902 – SAUNA HEATERS SECTION M1902 – SAUNA HEATERS
916	SECTION M1903 – STATIONARY FUEL CELL POWER PLANTS SECTION M1903 – STATIONARY FUEL CELL POWER PLANTS FIGURE M1903.1(1) – TYPICAL FUEL CELL COMPONENTS FIGURE M1903.1(1) – TYPICAL FUEL CELL COMPONENTS
917	SECTION M1904 – GASEOUS HYDROGEN SYSTEMS SECTION M1904 – GASEOUS HYDROGEN SYSTEMS FIGURE M1903.1(2) – TYPICAL FUEL CELL COMPONENTS FIGURE M1903.1(2) – TYPICAL FUEL CELL COMPONENTS BIBLIOGRAPHY BIBLIOGRAPHY
919	CHAPTER 20: BOILERS AND WATER HEATERS CHAPTER 20: BOILERS AND WATER HEATERS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M2001 – BOILERS SECTION M2001 – BOILERS
920	FIGURE M2001.2 – RESIDENTIAL BOILER AND ASSOCIATED EQUIPMENT FIGURE M2001.2 – RESIDENTIAL BOILER AND ASSOCIATED EQUIPMENT SECTION M2002 – OPERATING AND SAFETY CONTROLS SECTION M2002 – OPERATING AND SAFETY CONTROLS
921	FIGURE M2001.3 – MULTIPLE MODULAR UNITS FIGURE M2001.3 – MULTIPLE MODULAR UNITS
922	FIGURE M2002.2 – BOILER TEMPERATURE AND PRESSURE GAUGE FIGURE M2002.2 – BOILER TEMPERATURE AND PRESSURE GAUGE FIGURE M2002.3 – STEAM BOILER SIGHT GLASS FIGURE M2002.3 – STEAM BOILER SIGHT GLASS
923	SECTION M2003 – EXPANSION TANKS SECTION M2003 – EXPANSION TANKS
924	FIGURE M2002.5 – BOILER LOW-WATER CUTOFF CONTROL DEVICE FIGURE M2002.5 – BOILER LOW-WATER CUTOFF CONTROL DEVICE SECTION M2004 – WATER HEATERS USED FOR SPACE HEATING SECTION M2004 – WATER HEATERS USED FOR SPACE HEATING
925	TABLE M2003.2 – EXPANSION TANK MINIMUM CAPACITYa FOR FORCED HOT-WATER SYSTEMS TABLE M2003.2 – EXPANSION TANK MINIMUM CAPACITYa FOR FORCED HOT-WATER SYSTEMS SECTION M2005 – WATER HEATERS SECTION M2005 – WATER HEATERS
926	SECTION M2006 POOL HEATERS SECTION M2006 POOL HEATERS BIBLIOGRAPHY BIBLIOGRAPHY
929	CHAPTER 21: HYDRONIC PIPING CHAPTER 21: HYDRONIC PIPING GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M2101 – HYDRONIC PIPING SYSTEMS INSTALLATION SECTION M2101 – HYDRONIC PIPING SYSTEMS INSTALLATION
930	FIGURE M2101.7 – PROHIBITED BULLHEAD TEE ARRANGEMENT FIGURE M2101.7 – PROHIBITED BULLHEAD TEE ARRANGEMENT
931	TABLE M2101.1 – HYDRONIC PIPING MATERIALS TABLE M2101.1 – HYDRONIC PIPING MATERIALS
932	TABLE M2101.9 – HANGER SPACING INTERVALS TABLE M2101.9 – HANGER SPACING INTERVALS SECTION M2102 – BASEBOARD CONVECTORS SECTION M2102 – BASEBOARD CONVECTORS SECTION M2103 – FLOOR HEATING SYSTEMS SECTION M2103 – FLOOR HEATING SYSTEMS
933	SECTION M2104 – LOW TEMPERATURE PIPING SECTION M2104 – LOW TEMPERATURE PIPING
934	FIGURE M2104.2.1.1 – HEAT-FUSED JOINT FIGURE M2104.2.1.1 – HEAT-FUSED JOINT
935	SECTION M2105 – GROUND SOURCE HEAT PUMP SYSTEM LOOP PIPING SECTION M2105 – GROUND SOURCE HEAT PUMP SYSTEM LOOP PIPING BIBLIOGRAPHY BIBLIOGRAPHY
937	CHAPTER 22: SPECIAL PIPING AND STORAGE SYSTEMS CHAPTER 22: SPECIAL PIPING AND STORAGE SYSTEMS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M2201 – OIL TANKS SECTION M2201 – OIL TANKS
938	SECTION M2202 – OIL PIPING, FITTING AND CONNECTIONS SECTION M2202 – OIL PIPING, FITTING AND CONNECTIONS
939	SECTION M2203 – INSTALLATION SECTION M2203 – INSTALLATION
940	SECTION M2204 – OIL PUMPS AND VALVE SECTION M2204 – OIL PUMPS AND VALVE BIBLIOGRAPHY BIBLIOGRAPHY
943	CHAPTER 23: SOLAR SYSTEMS CHAPTER 23: SOLAR SYSTEMS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION M2301 – SOLAR ENERGY SYSTEMS SECTION M2301 – SOLAR ENERGY SYSTEMS
944	FIGURE 23(1) – PASSIVE SOLAR SPACE HEATING FIGURE 23(1) – PASSIVE SOLAR SPACE HEATING FIGURE 23(2) – PASSIVE SOLAR HEATING AND COOLING APPLICATIONS FIGURE 23(2) – PASSIVE SOLAR HEATING AND COOLING APPLICATIONS
945	FIGURE 23(3) – ACTIVE SPACE AND DOMESTIC WATER HEATING SYSTEM FIGURE 23(3) – ACTIVE SPACE AND DOMESTIC WATER HEATING SYSTEM
946	FIGURE 23(4) – PASSIVE COLLECTION WITH MECHANICAL DISTRIBUTION FIGURE 23(4) – PASSIVE COLLECTION WITH MECHANICAL DISTRIBUTION
948	BIBLIOGRAPHY BIBLIOGRAPHY
949	PART VI – FUEL GAS PART VI – FUEL GAS CHAPTER 24: FUEL GAS CHAPTER 24: FUEL GAS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION G2401 (101) – GENERAL SECTION G2401 (101) – GENERAL
950	SECTION G2402 (201) – GENERAL SECTION G2402 (201) – GENERAL SECTION G2403 (202) – GENERAL DEFINITIONS SECTION G2403 (202) – GENERAL DEFINITIONS
951	FIGURE G2403(1) ANODELESS RISERS FIGURE G2403(1) ANODELESS RISERS
952	FIGURE G2403(2) – BARAMETRIC DRAFT REGULATOR FIGURE G2403(2) – BARAMETRIC DRAFT REGULATOR
953	FIGURE G2403(3) – LABEL FOR LOW-PRESSURE BOILER FIGURE G2403(3) – LABEL FOR LOW-PRESSURE BOILER
954	FIGURE G2403(4) – FACTORY-BUILT CHIMNEYS FIGURE G2403(4) – FACTORY-BUILT CHIMNEYS
955	FIGURE G2403(5) – AIR COOLED FACTORY-BUILT CHIMNEY SECTION FIGURE G2403(5) – AIR COOLED FACTORY-BUILT CHIMNEY SECTION
957	FIGURE G2403(6) – DIRECT-VENT APPLIANCE FIGURE G2403(6) – DIRECT-VENT APPLIANCE FIGURE G2403(7) – DIRECT-VENT APPLIANCE FIGURE G2403(7) – DIRECT-VENT APPLIANCE
958	FIGURE G2403(8) – DRAFT HOOD EQUIPPED APPLIANCE FIGURE G2403(8) – DRAFT HOOD EQUIPPED APPLIANCE
960	FIGURE G2403(9) – CHIMNEY FLUE LINER SYSTEM FOR GAS APPLIANCE FIGURE G2403(9) – CHIMNEY FLUE LINER SYSTEM FOR GAS APPLIANCE
961	FIGURE G2403(10) – GAS CONVENIENCE OUTLET FIGURE G2403(10) – GAS CONVENIENCE OUTLET
962	FIGURE G2403(11) – GAS CONVENIENCE OUTLET FIGURE G2403(11) – GAS CONVENIENCE OUTLET
963	FIGURE G2403(12) – TYPICAL RESIDENTIAL GAS METER SETTING FIGURE G2403(12) – TYPICAL RESIDENTIAL GAS METER SETTING
964	FIGURE G2403(13) – VENT OFFSET FIGURE G2403(13) – VENT OFFSET FIGURE G2403.(14) – OXYGEN DEPLETION SAFETY SHUTOFF FIGURE G2403.(14) – OXYGEN DEPLETION SAFETY SHUTOFF
966	FIGURE G2403(15) – SERVICE REGULATOR FIGURE G2403(15) – SERVICE REGULATOR
967	FIGURE G2403(16) – UNVENTED ROOM HEATER FIGURE G2403(16) – UNVENTED ROOM HEATER FIGURE G2403(17) – TRANSITION FITTINGS FIGURE G2403(17) – TRANSITION FITTINGS
968	FIGURE G2403(18) – TYPE B VENT FIGURE G2403(18) – TYPE B VENT
970	SECTION G2404 (301) – GENERAL SECTION G2404 (301) – GENERAL
972	FIGURE G2404.10 – AUXILIARY DRAIN PAN REQUIRED (WITH OR WITHOUT COOLING COIL) FIGURE G2404.10 – AUXILIARY DRAIN PAN REQUIRED (WITH OR WITHOUT COOLING COIL)
973	SECTION G2405 (302) – STRUCTURAL SAFETY SECTION G2405 (302) – STRUCTURAL SAFETY SECTION G2406 (303) – APPLIANCE LOCATION SECTION G2406 (303) – APPLIANCE LOCATION
974	FIGURE G2406.2(1) – UNVENTED WALL-MOUNTED ROOM HEATER FIGURE G2406.2(1) – UNVENTED WALL-MOUNTED ROOM HEATER
975	FIGURE G2406.2(2) – APPLIANCE ENCLOSURE FIGURE G2406.2(2) – APPLIANCE ENCLOSURE SECTION G2407 (304) – COMBUSTION, VENTILATION AND DILUTION AIR SECTION G2407 (304) – COMBUSTION, VENTILATION AND DILUTION AIR
976	FIGURE G2407.1(1) – THE CHEMISTRY OF IDEAL COMBUSTION FIGURE G2407.1(1) – THE CHEMISTRY OF IDEAL COMBUSTION FIGURE G2407.1(2) – THE CHEMISTRY OF INCOMPLETE COMBUSTION FIGURE G2407.1(2) – THE CHEMISTRY OF INCOMPLETE COMBUSTION
977	FIGURE G2407.1(3) – COMBUSTION AIR SUPPLY METHODS FIGURE G2407.1(3) – COMBUSTION AIR SUPPLY METHODS
978	FIGURE G2407.1(4) – DIRECT-VENT APPLIANCE FIGURE G2407.1(4) – DIRECT-VENT APPLIANCE FIGURE G2407.1(5) – DIRECT COMBUSTION AIR CONNECTION TO THE OUTDOORS FIGURE G2407.1(5) – DIRECT COMBUSTION AIR CONNECTION TO THE OUTDOORS
980	FIGURE G2407.4 – DEPLETION OF COMBUSTION AIR FIGURE G2407.4 – DEPLETION OF COMBUSTION AIR
981	EQUATION 24-1 EQUATION 24-1 EQUATION 24-2 EQUATION 24-2 FIGURE G2407.5.3 (304.5.3) ALL AIR FROM INSIDE THE BUILDING (see Section G2407.5.3) FIGURE G2407.5.3 (304.5.3) ALL AIR FROM INSIDE THE BUILDING (see Section G2407.5.3)
982	TABLE G2407.5.2 – CALCULATED VOLUMES TABLE G2407.5.2 – CALCULATED VOLUMES
984	FIGURE G2407.6.1(1) [304.6(1)] ALL AIR FROM OUTDOOR-INLET AIR FROM VENTILATED CRAWL SPACE AND OUTLET AIR TO VENTILATED ATTIC (see Section G2407.6.1) FIGURE G2407.6.1(1) [304.6(1)] ALL AIR FROM OUTDOOR-INLET AIR FROM VENTILATED CRAWL SPACE AND OUTLET AIR TO VENTILATED ATTIC (see Section G2407.6.1) FIGURE G2407.6.1(2) [304.6.1(2)] ALL AIR FROM OUTDOORS THROUGH VENTILATED ATTIC(see Section G2407.6.1) FIGURE G2407.6.1(2) [304.6.1(2)] ALL AIR FROM OUTDOORS THROUGH VENTILATED ATTIC(see Section G2407.6.1)
985	FIGURE G2407.6.1(3) [304.6.1(3)] ALL AIR FROM OUTDOORS (see Section G2407.6.1) FIGURE G2407.6.1(3) [304.6.1(3)] ALL AIR FROM OUTDOORS (see Section G2407.6.1) FIGURE G2407.6.2 (304.6.2) SINGLE COMBUSTION AIR OPENING,ALL AIR FROM OUTDOORS (see Section G2407.6.2) FIGURE G2407.6.2 (304.6.2) SINGLE COMBUSTION AIR OPENING,ALL AIR FROM OUTDOORS (see Section G2407.6.2)
987	FIGURE G2407.7.3 ROOM CONFIGURATION USED IN EXAMPLE 2 FIGURE G2407.7.3 ROOM CONFIGURATION USED IN EXAMPLE 2
988	FIGURE G2407.8(1) MECHANICAL COMBUSTION AIR/MAKEUP AIR SUPPLY SYSTEM FIGURE G2407.8(1) MECHANICAL COMBUSTION AIR/MAKEUP AIR SUPPLY SYSTEM
989	FIGURE G2407.8(2) MECHANICAL COMBUSTION AIR SUPPLY SYSTEM FIGURE G2407.8(2) MECHANICAL COMBUSTION AIR SUPPLY SYSTEM FIGURE G2407.8(3) MECHANICAL COMBUSTION AIR/MAKEUP AIR SUPPLY SYSTEM FIGURE G2407.8(3) MECHANICAL COMBUSTION AIR/MAKEUP AIR SUPPLY SYSTEM
990	FIGURE G2407.9 MECHANICALLY SUPPLIED COMBUSTION AIR FIGURE G2407.9 MECHANICALLY SUPPLIED COMBUSTION AIR
991	FIGURE G2407.9.2 SIMPLIFIED EXAMPLE SCHEMATIC OF INTERLOCKBETWEEN APPLIANCE AND POWER COMBUSTION AIR UNIT(Shown for Illustrative Purpose only) FIGURE G2407.9.2 SIMPLIFIED EXAMPLE SCHEMATIC OF INTERLOCKBETWEEN APPLIANCE AND POWER COMBUSTION AIR UNIT(Shown for Illustrative Purpose only)
992	FIGURE G2407.10 SIMPLIFIED EXAMPLE SCHEMATIC OF COMBUSTION AIR DAMPER/APPLIANCE INTERLOCK(Shown for Illustrative Purpose Only) FIGURE G2407.10 SIMPLIFIED EXAMPLE SCHEMATIC OF COMBUSTION AIR DAMPER/APPLIANCE INTERLOCK(Shown for Illustrative Purpose Only)
993	FIGURE G2407.11 COMMON DUCT PROHIBITED FIGURE G2407.11 COMMON DUCT PROHIBITED
994	SECTION G2408 (305) INSTALLATION SECTION G2408 (305) INSTALLATION
995	FIGURE G2408.2(1) GAS-FIRED WATER HEATER INSTALLATION IN A GARAGE FIGURE G2408.2(1) GAS-FIRED WATER HEATER INSTALLATION IN A GARAGE FIGURE G2408.2(2) SOURCES OF IGNITIONELEVATED IN PRIVATE GARAGE FIGURE G2408.2(2) SOURCES OF IGNITIONELEVATED IN PRIVATE GARAGE
996	FIGURE G2408.2(3) GARAGE SPACE VS. LIVING SPACE FIGURE G2408.2(3) GARAGE SPACE VS. LIVING SPACE FIGURE G2408.2(4) EXAMPLE OF FLAMMABLE VAPOR IGNITION RESISTANT WATER HEATER TECHNOLOGY FIGURE G2408.2(4) EXAMPLE OF FLAMMABLE VAPOR IGNITION RESISTANT WATER HEATER TECHNOLOGY
997	FIGURE G2408.2(5) EXAMPLE OF FLAMMABLE VAPOR IGNITION RESISTANT WATER HEATER TECHNOLOGY FIGURE G2408.2(5) EXAMPLE OF FLAMMABLE VAPOR IGNITION RESISTANT WATER HEATER TECHNOLOGY FIGURE G2048l.2(6) EXAMPLE OF FLAMMABLE VAPOR IGNITION RESISTANT WATER HEATER TECHNOLOGY FIGURE G2048l.2(6) EXAMPLE OF FLAMMABLE VAPOR IGNITION RESISTANT WATER HEATER TECHNOLOGY FIGURE G2408.2.1 ELEVATION OF APPLIANCES NOT REQUIRED FIGURE G2408.2.1 ELEVATION OF APPLIANCES NOT REQUIRED
998	FIGURE G2408.3(1) SUSPENDED UNIT HEATER FIGURE G2408.3(1) SUSPENDED UNIT HEATER FIGURE G2408.3(2) PROTECTED BY WALLS FIGURE G2408.3(2) PROTECTED BY WALLS
999	FIGURE G2408.3(3) PROTECTED BY GUARDS FIGURE G2408.3(3) PROTECTED BY GUARDS FIGURE G2408.3(4) PROTECTED BY A PLATFORM FIGURE G2408.3(4) PROTECTED BY A PLATFORM
1000	FIGURE G2408.3(5) PROTECTED BY A CURB STOP FIGURE G2408.3(5) PROTECTED BY A CURB STOP SECTION G2409 (308) CLEARANCE REDUCTION SECTION G2409 (308) CLEARANCE REDUCTION
1001	FIGURE G2409.1 CLEARANCE TO COMBUSTIBLES—EXAMPLES OF HOW TO MEASURE FIGURE G2409.1 CLEARANCE TO COMBUSTIBLES—EXAMPLES OF HOW TO MEASURE
1003	TABLE G2409.2 (308.2)a through k REDUCTION OF CLEARANCES WITH SPECIFIED FORMS OF PROTECTION TABLE G2409.2 (308.2)a through k REDUCTION OF CLEARANCES WITH SPECIFIED FORMS OF PROTECTION
1004	FIGURE G2409.2(1) EXTENT OF PROTECTION NECESSARY TO REDUCE CLEARANCES FROM GAS EQUIPMENT OR VENT CONNECTIONS FIGURE G2409.2(1) EXTENT OF PROTECTION NECESSARY TO REDUCE CLEARANCES FROM GAS EQUIPMENT OR VENT CONNECTIONS FIGURE G2409.2(2) WALL PROTECTOR CLEARANCE REDUCTION SYSTEM FIGURE G2409.2(2) WALL PROTECTOR CLEARANCE REDUCTION SYSTEM
1005	FIGURE G2409.2(3) MASONRY CLEARANCE REDUCTION SYSTEM FIGURE G2409.2(3) MASONRY CLEARANCE REDUCTION SYSTEM FIGURE G2409.2 REDUCED CLEARANCE TO COMBUSTIBLES FIGURE G2409.2 REDUCED CLEARANCE TO COMBUSTIBLES
1007	SECTION G2410 (309) ELECTRICAL SECTION G2410 (309) ELECTRICAL SECTION G2411 (310) ELECTRICAL BONDING SECTION G2411 (310) ELECTRICAL BONDING
1008	FIGURE G2411.1 GAS PIPE BONDING BY APPLIANCE BRANCH CIRCUIT FIGURE G2411.1 GAS PIPE BONDING BY APPLIANCE BRANCH CIRCUIT
1009	FIGURE G2411.1(1) CSST BONDING FIGURE G2411.1(1) CSST BONDING
1010	FIGURE G2411.1(2) ALTERNATIVE LOCATION FOR BONDING CLAMP FIGURE G2411.1(2) ALTERNATIVE LOCATION FOR BONDING CLAMP SECTION G2412 (401) GENERAL SECTION G2412 (401) GENERAL
1011	FIGURE G2412.1(1) SCOPE OF CODES FIGURE G2412.1(1) SCOPE OF CODES
1012	FIGURE G2412.1(2) TYPICAL POINT OF DELIVERY FOR NATURAL GAS SERVICE FIGURE G2412.1(2) TYPICAL POINT OF DELIVERY FOR NATURAL GAS SERVICE
1013	SECTION G2413 (402) PIPE SIZING SECTION G2413 (402) PIPE SIZING
1014	TABLE G2413.2 (402.2) APPROXIMATE GAS INPUT FOR TYPICAL APPLIANCES TABLE G2413.2 (402.2) APPROXIMATE GAS INPUT FOR TYPICAL APPLIANCES
1015	EQUATION 24-3 EQUATION 24-3 EQUATION 24-4 EQUATION 24-4
1016	TABLE G2413.4 (402.4) Cr AND Y VALUES FOR NATURAL GAS AND UNDILUTED PROPANE AT STANDARD CONDITIONS TABLE G2413.4 (402.4) Cr AND Y VALUES FOR NATURAL GAS AND UNDILUTED PROPANE AT STANDARD CONDITIONS FIGURE G2413.4 GAS PIPING LAYOUT FIGURE G2413.4 GAS PIPING LAYOUT
1017	TABLE G2413.4(1) [402.4(2)] SCHEDULE 40 METALLIC PIPE TABLE G2413.4(1) [402.4(2)] SCHEDULE 40 METALLIC PIPE
1018	TABLE G2413.4(2) [402.4(3)] SCHEDULE 40 METALLIC PIPE TABLE G2413.4(2) [402.4(3)] SCHEDULE 40 METALLIC PIPE
1019	TABLE G2413.4(3) [402.4(7)] SEMIRIGID COPPER TUBING TABLE G2413.4(3) [402.4(7)] SEMIRIGID COPPER TUBING
1020	TABLE G2413.4(4) [402.4(10)] SEMIRIGID COPPER TUBING TABLE G2413.4(4) [402.4(10)] SEMIRIGID COPPER TUBING
1021	TABLE G2413.4(5) [402.4(13)] CORRUGATED STAINLESS STEEL TUBING (CSST) TABLE G2413.4(5) [402.4(13)] CORRUGATED STAINLESS STEEL TUBING (CSST)
1022	TABLE G2413.4(6) [402.4(16)] CORRUGATED STAINLESS STEEL TUBING (CSST) TABLE G2413.4(6) [402.4(16)] CORRUGATED STAINLESS STEEL TUBING (CSST)
1023	TABLE G2413.4(7) [402.4(19)] POLYETHYLENE PLASTIC PIPE TABLE G2413.4(7) [402.4(19)] POLYETHYLENE PLASTIC PIPE
1024	TABLE G2413.4(8) [402.4(20)] POLYETHYLENE PLASTIC PIPE TABLE G2413.4(8) [402.4(20)] POLYETHYLENE PLASTIC PIPE
1025	TABLE G2413.4(9) [402.4(23)] SCHEDULE 40 METALLIC PIPE TABLE G2413.4(9) [402.4(23)] SCHEDULE 40 METALLIC PIPE
1026	TABLE G2413.4(10) [402.4(24)] SCHEDULE 40 METALLIC PIPE TABLE G2413.4(10) [402.4(24)] SCHEDULE 40 METALLIC PIPE
1027	TABLE G2413.4(11) [402.4(25)] SCHEDULE 40 METALLIC PIPE TABLE G2413.4(11) [402.4(25)] SCHEDULE 40 METALLIC PIPE
1028	TABLE G2413.4(12) [402.4(26)] SCHEDULE 40 METALLIC PIPE TABLE G2413.4(12) [402.4(26)] SCHEDULE 40 METALLIC PIPE
1029	TABLE G2413.4(13) [402.4(27)] SEMIRIGID COPPER TUBING TABLE G2413.4(13) [402.4(27)] SEMIRIGID COPPER TUBING
1030	TABLE G2413.4(14) [402.4(28)] SEMIRIGID COPPER TUBING TABLE G2413.4(14) [402.4(28)] SEMIRIGID COPPER TUBING
1031	TABLE G2413.4(15) [402.4(29)] SEMIRIGID COPPER TUBING TABLE G2413.4(15) [402.4(29)] SEMIRIGID COPPER TUBING
1032	TABLE G2413.4(16) [402.4(30)] CORRUGATED STAINLESS STEEL TUBING (CSST) TABLE G2413.4(16) [402.4(30)] CORRUGATED STAINLESS STEEL TUBING (CSST)
1033	TABLE G2413.4(17) [402.4(31)] CORRUGATED STAINLESS STEEL TUBING (CSST) TABLE G2413.4(17) [402.4(31)] CORRUGATED STAINLESS STEEL TUBING (CSST)
1034	TABLE G2413.4(18) [402.4(32)] CORRUGATED STAINLESS STEEL TUBING (CSST) TABLE G2413.4(18) [402.4(32)] CORRUGATED STAINLESS STEEL TUBING (CSST)
1035	TABLE G2413.4(19) [402.4(33)] POLYETHYLENE PLASTIC PIPE TABLE G2413.4(19) [402.4(33)] POLYETHYLENE PLASTIC PIPE
1036	TABLE G2413.4(20) [402.4(34)] POLYETHYLENE PLASTIC PIPE TABLE G2413.4(20) [402.4(34)] POLYETHYLENE PLASTIC PIPE
1037	TABLE G2413.4(21) [402.4(35)] POLYETHYLENE PLASTIC TUBING TABLE G2413.4(21) [402.4(35)] POLYETHYLENE PLASTIC TUBING
1038	FIGURE G2413.4.1 STEEL PIPE BRANCH SYSTEM FOR ROOF TOP UNITS FIGURE G2413.4.1 STEEL PIPE BRANCH SYSTEM FOR ROOF TOP UNITS
1039	FIGURE G2413.4.2(1) BRANCH PIPING SYSTEM WITH SCHEDULE 40 STEEL PIPE TUNKLINE AND CSST BRANCHES FIGURE G2413.4.2(1) BRANCH PIPING SYSTEM WITH SCHEDULE 40 STEEL PIPE TUNKLINE AND CSST BRANCHES
1040	FIGURE G2413.4.2(2) SINGLE PRESSURE CSST MANIFOLD SYSTEM FIGURE G2413.4.2(2) SINGLE PRESSURE CSST MANIFOLD SYSTEM
1041	FIGURE G2413.4.3(1) HYBRID PRESSURE BRANCH SYSTEM FOR ROOF TOP UNITS FIGURE G2413.4.3(1) HYBRID PRESSURE BRANCH SYSTEM FOR ROOF TOP UNITS
1042	FIGURE G2413.4.3(2) HYBRID PRESSURE PARALLEL DISTRIBUTION SYSTEM FIGURE G2413.4.3(2) HYBRID PRESSURE PARALLEL DISTRIBUTION SYSTEM
1044	SECTION G2414 (403) PIPING MATERIALS SECTION G2414 (403) PIPING MATERIALS FIGURE G2414.5 PLASTIC-SHEATHED COPPER TUBING FIGURE G2414.5 PLASTIC-SHEATHED COPPER TUBING
1045	FIGURE G2414.5.3(1) CSST AND SYSTEM COMPONENTS FIGURE G2414.5.3(1) CSST AND SYSTEM COMPONENTS FIGURE G2414.5.3(2) CSST FITTING FIGURE G2414.5.3(2) CSST FITTING FIGURE G2414.5.3(3) CSST FITTING FIGURE G2414.5.3(3) CSST FITTING
1046	FIGURE G2414.5.3(4) CSST FITTING FIGURE G2414.5.3(4) CSST FITTING FIGURE G2414.5.3(5) MULTIPORT MANIFOLD INSTALLATION USING CSST FIGURE G2414.5.3(5) MULTIPORT MANIFOLD INSTALLATION USING CSST FIGURE G2414.5.3(6) TOP PLATE TUBING PROTECTION SHIELD FIGURE G2414.5.3(6) TOP PLATE TUBING PROTECTION SHIELD
1047	FIGURE G2414.5.3(7) LOW-PRESSURE GAS PIPING SYSTEM USING CSST FIGURE G2414.5.3(7) LOW-PRESSURE GAS PIPING SYSTEM USING CSST FIGURE G2414.5.3(8) MEDIUM-PRESSURE GAS PIPING SYSTEM USING CSST FIGURE G2414.5.3(8) MEDIUM-PRESSURE GAS PIPING SYSTEM USING CSST
1048	FIGURE G2414.5.3(9) CSST MANUFACTURED FOR UNDERGROUND INSTALLATION FIGURE G2414.5.3(9) CSST MANUFACTURED FOR UNDERGROUND INSTALLATION FIGURE G2414.5.3(10) EXCERPT FROM CSST MANUFACTURER’S INSTALLATION INSTRUCTIONS FIGURE G2414.5.3(10) EXCERPT FROM CSST MANUFACTURER’S INSTALLATION INSTRUCTIONS
1049	FIGURE G2414.5.3(11) EXCERPT FROM CSST MANUFACTURER’S INSTALLATION INSTRUCTION FIGURE G2414.5.3(11) EXCERPT FROM CSST MANUFACTURER’S INSTALLATION INSTRUCTION FIGURE G2414.5.3(12) MANIFOLD FOR 2 PSI PARALLEL DISTRIBUTION SYSTEM FIGURE G2414.5.3(12) MANIFOLD FOR 2 PSI PARALLEL DISTRIBUTION SYSTEM FIGURE G2414.5.3(13) “STUB-OUT” TERMINATION TRANSITION FITTING FIGURE G2414.5.3(13) “STUB-OUT” TERMINATION TRANSITION FITTING FIGURE G2414.5.3(14) “VALVE BOX” TERMINATION TRANSITION FITTING FIGURE G2414.5.3(14) “VALVE BOX” TERMINATION TRANSITION FITTING FIGURE G2414.5.3(15) TERMINATION TRANSITION FITTING FIGURE G2414.5.3(15) TERMINATION TRANSITION FITTING
1050	FIGURE G2414.6.1(1) SERVICE HEAD ADAPTERS FIGURE G2414.6.1(1) SERVICE HEAD ADAPTERS
1051	FIGURE G2414.6.1(2) SERVICE HEAD ADAPTERS FIGURE G2414.6.1(2) SERVICE HEAD ADAPTERS FIGURE G2414.6.1(3) FLEXIBLE ANODELESS RISER FIGURE G2414.6.1(3) FLEXIBLE ANODELESS RISER
1052	FIGURE G2414.9 (403.9) TAPERED THREAD COUPLING IN CONNECTION TO FURNACE FIGURE G2414.9 (403.9) TAPERED THREAD COUPLING IN CONNECTION TO FURNACE
1053	TABLE G2414.9.2 (403.9.2) SPECIFICATIONS FOR THREADING METALLIC PIPE TABLE G2414.9.2 (403.9.2) SPECIFICATIONS FOR THREADING METALLIC PIPE
1054	FIGURE G2414.10.2 PRESS-CONNECT COPPER FITTING FIGURE G2414.10.2 PRESS-CONNECT COPPER FITTING
1055	SECTION G2415 (404) PIPING SYSTEM INSTALLATION SECTION G2415 (404) PIPING SYSTEM INSTALLATION
1056	FIGURE G2414.11(1) MECHANICAL JOINTS FIGURE G2414.11(1) MECHANICAL JOINTS FIGURE G2414.11(2) MECHANICAL JOINT FIGURE G2414.11(2) MECHANICAL JOINT
1057	FIGURE G2414.11(3) PLASTIC PIPE TRANSITION FITTING FIGURE G2414.11(3) PLASTIC PIPE TRANSITION FITTING FIGURE G2414.11(4) PLASTIC PIPE TRANSITION FITTING FIGURE G2414.11(4) PLASTIC PIPE TRANSITION FITTING
1058	FIGURE G2415.1 PROHIBITED TOWNHOUSE INSTALLATION FIGURE G2415.1 PROHIBITED TOWNHOUSE INSTALLATION
1059	FIGURE G2415.4 ABOVE GRADE ENTRANCE/EXIT FIGURE G2415.4 ABOVE GRADE ENTRANCE/EXIT
1060	FIGURE G2415.5 PIPE PROTECTION FIGURE G2415.5 PIPE PROTECTION
1061	FIGURE G2415.6 PIPING IN SOLID FLOORS FIGURE G2415.6 PIPING IN SOLID FLOORS
1062	FIGURE G2415.6.2 PIPE UNDER SLAB BETWEEN INTERIOR POINTS FIGURE G2415.6.2 PIPE UNDER SLAB BETWEEN INTERIOR POINTS
1063	FIGURE G2415.8 LP-GAS PIPING ISOLATION FIGURE G2415.8 LP-GAS PIPING ISOLATION
1064	FIGURE G2415.10 MINIMUM BURIAL DEPTH FIGURE G2415.10 MINIMUM BURIAL DEPTH
1065	FIGURE G2415.12.1 GAS PIPING IN CONDUIT UNDERGROUND BENEATH BUILDING FIGURE G2415.12.1 GAS PIPING IN CONDUIT UNDERGROUND BENEATH BUILDING
1066	FIGURE G2415.15.1 PIPING UNDER SLABS FIGURE G2415.15.1 PIPING UNDER SLABS
1067	SECTION G2416 (405) – PIPING BENDS AND CHANGES IN DIRECTION SECTION G2416 (405) – PIPING BENDS AND CHANGES IN DIRECTION
1068	SECTION G2417 (406) – INSPECTION, TESTING AND PURGI SECTION G2417 (406) – INSPECTION, TESTING AND PURGI
1069	FIGURE G2417.1.4 PIPING ISOLATION ARRANGEMENT FOR TESTING FIGURE G2417.1.4 PIPING ISOLATION ARRANGEMENT FOR TESTING
1070	FIGURE G2417.3.3 MANUFACTURER’S WARNING REGARDING PRESSURE TESTING OF GAS PIPING FIGURE G2417.3.3 MANUFACTURER’S WARNING REGARDING PRESSURE TESTING OF GAS PIPING
1071	FIGURE 2417.4(1) TYPICAL TEST SET-UP FOR AIR PRESSURE TESTING FIGURE 2417.4(1) TYPICAL TEST SET-UP FOR AIR PRESSURE TESTING FIGURE 2417.4(2) ELECTRONIC PRESSURE GAUGE FIGURE 2417.4(2) ELECTRONIC PRESSURE GAUGE
1072	FIGURE 2417.4(3) LEAK DETECTOR INSTRUMENT FIGURE 2417.4(3) LEAK DETECTOR INSTRUMENT FIGURE 2417.4(4) ELECTRONIC LEAK DETECTOR INSTRUMENT FIGURE 2417.4(4) ELECTRONIC LEAK DETECTOR INSTRUMENT
1074	SECTION G2418 (407) – PIPING SUPPORT SECTION G2418 (407) – PIPING SUPPORT
1075	SECTION G2419 (408) – DRIPS AND SLOPED PIPING SECTION G2419 (408) – DRIPS AND SLOPED PIPING
1076	FIGURE G2419.4(1) SEDIMENT TRAP FIGURE G2419.4(1) SEDIMENT TRAP FIGURE G2419.4(2) RELATIVELY INEFFECTIVE SEDIMENT TRAP CONFIGURATION FIGURE G2419.4(2) RELATIVELY INEFFECTIVE SEDIMENT TRAP CONFIGURATION
1077	SECTION G2420 (409) GAS SHUTOFF VALVES SECTION G2420 (409) GAS SHUTOFF VALVES TABLE G2420.1.1 MANUAL GAS VALVE STANDARDS TABLE G2420.1.1 MANUAL GAS VALVE STANDARDS FIGURE G2420.1.1(1) TYPICAL BALL-TYPE GAS SHUTOFF VALVE FIGURE G2420.1.1(1) TYPICAL BALL-TYPE GAS SHUTOFF VALVE FIGURE G2420.1.1(2) BALL-TYPE GAS SHUTOFF VALVE DESIGNED TO MATE WITH A CONNECTOR FIGURE G2420.1.1(2) BALL-TYPE GAS SHUTOFF VALVE DESIGNED TO MATE WITH A CONNECTOR
1079	FIGURE G2420.5.1 SHUTOFF VALVE IN CONTROL COMPARTMENT OF GAS FIREPLACE FIGURE G2420.5.1 SHUTOFF VALVE IN CONTROL COMPARTMENT OF GAS FIREPLACE
1080	SECTION G2421 (410) – FLOW CONTROLS SECTION G2421 (410) – FLOW CONTROLS FIGURE G2421.1(1) – GAS PRESSURE REGULATOR FIGURE G2421.1(1) – GAS PRESSURE REGULATOR
1081	FIGURE G2421.1(2) – SERVICE REGULATOR FIGURE G2421.1(2) – SERVICE REGULATOR FIGURE G2421.1(3) – GAS PRESSURE REGULATOR FIGURE G2421.1(3) – GAS PRESSURE REGULATOR
1082	FIGURE G2421.1(4) – SYSTEM PRESSURES FIGURE G2421.1(4) – SYSTEM PRESSURES
1083	FIGURE G2421.2(1) – SYSTEM PRESSURES FIGURE G2421.2(1) – SYSTEM PRESSURES FIGURE G2421.2(2) – PRESSURE REGULATOR/OVERPRESSURE PROTECTION DEVICE ASSEMBLIES FIGURE G2421.2(2) – PRESSURE REGULATOR/OVERPRESSURE PROTECTION DEVICE ASSEMBLIES
1084	FIGURE G2421.3(1 ) – REGULATOR WITH VENT PROTECTION FIGURE G2421.3(1 ) – REGULATOR WITH VENT PROTECTION FIGURE G2421.3(2) – PRESSURE REGULATOR WITH VENT-LIMITING DEVICE FIGURE G2421.3(2) – PRESSURE REGULATOR WITH VENT-LIMITING DEVICE SECTION G2422 (411) – APPLIANCE CONNECTIONS SECTION G2422 (411) – APPLIANCE CONNECTIONS
1085	FIGURE G2422.1(1) PIPING SYSTEM SIZING AND APPLIANCE CONNECTION AND CONNECTOR SIZING FIGURE G2422.1(1) PIPING SYSTEM SIZING AND APPLIANCE CONNECTION AND CONNECTOR SIZING FIGURE G2422.1(2) QUICK-DISCONNECT DEVICE FOR USE WITH COMMERCIAL APPLIANCE CONNECTORS FIGURE G2422.1(2) QUICK-DISCONNECT DEVICE FOR USE WITH COMMERCIAL APPLIANCE CONNECTORS
1086	FIGURE G2422.1(3) QUICK-DISCONNECT DEVICE FOR USE WITH COMMERCIAL APPLIANCE CONNECTORS FIGURE G2422.1(3) QUICK-DISCONNECT DEVICE FOR USE WITH COMMERCIAL APPLIANCE CONNECTORS FIGURE G2422.1(4) CSST DIRECTLY CONNECTED TO NONMOVABLE APPLIANCE FIGURE G2422.1(4) CSST DIRECTLY CONNECTED TO NONMOVABLE APPLIANCE
1087	FIGURE G2422.1(5) CSST TERMINATED TO APPLIANCE LOCATION FIGURE G2422.1(5) CSST TERMINATED TO APPLIANCE LOCATION FIGURE G2422.1(6) SEMI-RIGID (FLEXIBLE) APPLIANCE CONNECTOR FIGURE G2422.1(6) SEMI-RIGID (FLEXIBLE) APPLIANCE CONNECTOR FIGURE G2422.1(7) OUTDOOR MOBILE HOME CONNECTOR FIGURE G2422.1(7) OUTDOOR MOBILE HOME CONNECTOR
1089	FIGURE G2422.1.2.1(1) APPLIANCE FUEL CONNECTOR FIGURE G2422.1.2.1(1) APPLIANCE FUEL CONNECTOR
1090	FIGURE G2422.1.2.1(2) APPLIANCE FUEL CONNECTO FIGURE G2422.1.2.1(2) APPLIANCE FUEL CONNECTO FIGURE G2422.1.2.3 CONNECTOR PIPING DOWNSTREAM OF SHUTOFF VALVE FIGURE G2422.1.2.3 CONNECTOR PIPING DOWNSTREAM OF SHUTOFF VALVE
1091	SECTION G2423 (413) CNG GAS-DISPENSING SYSTEMS SECTION G2423 (413) CNG GAS-DISPENSING SYSTEMS SECTION G2424 (415) PIPING SUPPORT INTERVALS SECTION G2424 (415) PIPING SUPPORT INTERVALS TABLE G2424.1 SUPPORT OF PIPING TABLE G2424.1 SUPPORT OF PIPING
1092	FIGURE G2422.2(1) EXAMPLE OF ONE MANUFACTURER’S INSTALLATION INSTRUCTIONS FIGURE G2422.2(1) EXAMPLE OF ONE MANUFACTURER’S INSTALLATION INSTRUCTIONS FIGURE G2422.2(2) END VIEW OF FIGURE G2422.2(1) FIGURE G2422.2(2) END VIEW OF FIGURE G2422.2(1)
1093	SECTION G2425 (501) – GENERAL SECTION G2425 (501) – GENERAL
1094	FIGURE G2425.6 VENT DESIGNED FOR CATEGORY III AND IVPOSITIVE PRESSURE) APPLICATIONS FIGURE G2425.6 VENT DESIGNED FOR CATEGORY III AND IVPOSITIVE PRESSURE) APPLICATIONS
1096	FIGURE G2425.13(1) MASONRY CHIMNEY RELINING SYSTEM FIGURE G2425.13(1) MASONRY CHIMNEY RELINING SYSTEM FIGURE G2425.13(2) MASONRY CHIMNEY RELINING SYSTEM FIGURE G2425.13(2) MASONRY CHIMNEY RELINING SYSTEM FIGURE G2425.13(3) MASONRY CHIMNEY RELINING BY INSTALLATION OF TYPE B VENT SYSTEM FIGURE G2425.13(3) MASONRY CHIMNEY RELINING BY INSTALLATION OF TYPE B VENT SYSTEM
1097	FIGURE G2425.13(4) MASONRY CHIMNEY RELINING SYSTEM FIGURE G2425.13(4) MASONRY CHIMNEY RELINING SYSTEM FIGURE G2425.14 SPECIAL VENT SYSTEM FOR CATEGORYII, III AND IV APPLIANCES FIGURE G2425.14 SPECIAL VENT SYSTEM FOR CATEGORYII, III AND IV APPLIANCES
1098	FIGURE G2425.15 APPLIANCE REPLACEMENTS AFFECTING EXISTING APPLIANCES FIGURE G2425.15 APPLIANCE REPLACEMENTS AFFECTING EXISTING APPLIANCES
1099	SECTION G2426 (502) – VENTS SECTION G2426 (502) – VENTS
1100	FIGURE G2426.1(1) CATEGORY I FAN-ASSISTED FURNA FIGURE G2426.1(1) CATEGORY I FAN-ASSISTED FURNA FIGURE G2426.1(2) CATEGORY IV APPLIANCE (FURNACE FIGURE G2426.1(2) CATEGORY IV APPLIANCE (FURNACE
1101	FIGURE G2426.1(3) TYPE B GAS VENT SERVING TWO CATEGORY I APPLIANCES FIGURE G2426.1(3) TYPE B GAS VENT SERVING TWO CATEGORY I APPLIANCES FIGURE G2426.1(4) TYPE B VENT SECTIONS WITH AIR SPACE BETWEEN PIPE WALLS FIGURE G2426.1(4) TYPE B VENT SECTIONS WITH AIR SPACE BETWEEN PIPE WALLS
1102	SECTION G2427 (503) VENTING OF APPLIANCES SECTION G2427 (503) VENTING OF APPLIANCES
1103	FIGURE G2426.7 PLAN VIEW OF STUD WALL FIGURE G2426.7 PLAN VIEW OF STUD WALL
1104	FIGURE G2427.2.1(1) DIRECT-VENT APPLIANCE FIGURE G2427.2.1(1) DIRECT-VENT APPLIANCE FIGURE G2427.2.1(2) DIRECT-VENT(SEPARATED COMBUSTION) UNIT HEATERS FIGURE G2427.2.1(2) DIRECT-VENT(SEPARATED COMBUSTION) UNIT HEATERS FIGURE G2427.2.1(3) EXAMPLE OF MANUFACTURER’S DETAIL FORDIRECT-VENT APPLIANCE CONCENTRIC VENT-AIR INTAKE TERMINAL FIGURE G2427.2.1(3) EXAMPLE OF MANUFACTURER’S DETAIL FORDIRECT-VENT APPLIANCE CONCENTRIC VENT-AIR INTAKE TERMINAL FIGURE G2427.2.1(4) DIRECT-VENT APPLIANCES FIGURE G2427.2.1(4) DIRECT-VENT APPLIANCES
1105	FIGURE G2427.2.1(5) GRAVITY DIRECT-VENT WATER HEATER FIGURE G2427.2.1(5) GRAVITY DIRECT-VENT WATER HEATER FIGURE G2427.2.1(6) DIRECT-VENT SYSTEM COMPONENTS FIGURE G2427.2.1(6) DIRECT-VENT SYSTEM COMPONENTS FIGURE G2427.2.2(1) HOT WATER BOILER WITH INTEGRAL VENT FOR OUTDOOR INSTALLATION FIGURE G2427.2.2(1) HOT WATER BOILER WITH INTEGRAL VENT FOR OUTDOOR INSTALLATION
1106	FIGURE G2427.2.2(2) OUTDOOR DUCT FURNACE WITH INTEGRAL POWER VENTING FIGURE G2427.2.2(2) OUTDOOR DUCT FURNACE WITH INTEGRAL POWER VENTING FIGURE G2427.2.2(3) ROOFTOP HVAC UNIT WITH INTEGRAL POWER VENT FIGURE G2427.2.2(3) ROOFTOP HVAC UNIT WITH INTEGRAL POWER VENT
1107	FIGURE G2427.3.3(1) VERTICAL DRAFT INDUCER FIGURE G2427.3.3(1) VERTICAL DRAFT INDUCER FIGURE G2427.3.3(2) HORIZONTAL POWER EXHAUSTER FIGURE G2427.3.3(2) HORIZONTAL POWER EXHAUSTER
1108	FIGURE G2427.3.3(3) HORIZONTAL POWER EXHAUSTERS FIGURE G2427.3.3(3) HORIZONTAL POWER EXHAUSTERS FIGURE G2427.3.3(4) POWER EXHAUSTER OUTDOOR TERMINAL-TYPE UNIT FIGURE G2427.3.3(4) POWER EXHAUSTER OUTDOOR TERMINAL-TYPE UNIT
1109	FIGURE G2427.3.3(5) EXHAUSTER AND CONTROL PACKAGE FIGURE G2427.3.3(5) EXHAUSTER AND CONTROL PACKAGE FIGURE G2427.3.3(6) TYPICAL POWER EXHAUSTER FIGURE G2427.3.3(6) TYPICAL POWER EXHAUSTER
1110	FIGURE G2427.3.3(7) TYPICAL EXHAUSTER APPLICATIONS FIGURE G2427.3.3(7) TYPICAL EXHAUSTER APPLICATIONS FIGURE G2427.3.3(8) DRAFT INDUCER FIGURE G2427.3.3(8) DRAFT INDUCER FIGURE G2427.3.3(9) DRAFT INDUCER FIGURE G2427.3.3(9) DRAFT INDUCER
1111	FIGURE G2427.3.3(10) POWER VENTED WATER HEATER FIGURE G2427.3.3(10) POWER VENTED WATER HEATER FIGURE G2427.3.3(11) SIMPLIFIED SAMPLE INTERLOCK DIAGRAM FOR APPLIANCE S FIGURE G2427.3.3(11) SIMPLIFIED SAMPLE INTERLOCK DIAGRAM FOR APPLIANCE S
1112	FIGURE G2427.3.5 VENTS THROUGH AIR PLENUMS FIGURE G2427.3.5 VENTS THROUGH AIR PLENUMS
1113	TABLE G2427.4 TYPE OF VENTING SYSTEM TO BE USED TABLE G2427.4 TYPE OF VENTING SYSTEM TO BE USED FIGURE G2427.4 DETERMINING VENT HEIGHT FIGURE G2427.4 DETERMINING VENT HEIGHT
1115	FIGURE G2427.5.3 TYPICAL TERMINATION LOCATIONS FOR CHIMNEYS AND SINGLE-WALL METAL PIPES FIGURE G2427.5.3 TYPICAL TERMINATION LOCATIONS FOR CHIMNEYS AND SINGLE-WALL METAL PIPES
1116	FIGURE G2427.5.3(1) LOW-HEAT CHIMNEY TERMINATIONS FIGURE G2427.5.3(1) LOW-HEAT CHIMNEY TERMINATIONS
1117	FIGURE G2427.5.3(2) – DECORATIVE SHROUDS FIGURE G2427.5.3(2) – DECORATIVE SHROUDS FIGURE G2427.5.5.1(1) CHIMNEY LINING SYSTEM FOR GAS APPLIANCES FIGURE G2427.5.5.1(1) CHIMNEY LINING SYSTEM FOR GAS APPLIANCES
1118	FIGURE G2427.5.5.1(2) DIRECT-VENT GAS APPLIANCE FOR INSTALLATION IN SOLID FUEL FIREPLACE FIGURE G2427.5.5.1(2) DIRECT-VENT GAS APPLIANCE FOR INSTALLATION IN SOLID FUEL FIREPLACE
1120	FIGURE G2427.6.3 (503.6.4) GAS VENT TERMINATION LOCATIONS FOR LISTED CAPS 12 INCHES OR LESS IN SIZE AT LEAST 8 FEET FROM A VERTICAL WALL FIGURE G2427.6.3 (503.6.4) GAS VENT TERMINATION LOCATIONS FOR LISTED CAPS 12 INCHES OR LESS IN SIZE AT LEAST 8 FEET FROM A VERTICAL WALL
1121	FIGURE G2427.6.3 TOP LOCATION RULES FIGURE G2427.6.3 TOP LOCATION RULES
1122	FIGURE G2427.6.3.1 DECORATIVE SHROUDS FIGURE G2427.6.3.1 DECORATIVE SHROUDS
1123	FIGURE G2427.6.6 GAS VENT TERMINATIONS WITH RESPECT TO FORCED AIR INTAKES FIGURE G2427.6.6 GAS VENT TERMINATIONS WITH RESPECT TO FORCED AIR INTAKES
1125	FIGURE G2427.6.11 FASTENER PENETRATIO FIGURE G2427.6.11 FASTENER PENETRATIO
1128	FIGURE G2427.8(1) MECHANICAL DRAFT VENTING SYSTEM EXHAUSTER TERMINATIONS FIGURE G2427.8(1) MECHANICAL DRAFT VENTING SYSTEM EXHAUSTER TERMINATIONS
1129	FIGURE G2427.8(2) EXAMPLE OF MANUFACTURER’S DETAIL FOR DIRECT-VENT APPLIANCE TERMINAL FIGURE G2427.8(2) EXAMPLE OF MANUFACTURER’S DETAIL FOR DIRECT-VENT APPLIANCE TERMINAL FIGURE G2427.8(3) EXAMPLE OF MANUFACTURER’S DETAIL FOR DIRECT-VENT APPLIANCE TERMINAL FIGURE G2427.8(3) EXAMPLE OF MANUFACTURER’S DETAIL FOR DIRECT-VENT APPLIANCE TERMINAL
1130	FIGURE G2427.8(4) DIRECT-VENT HOT WATER BOILER FIGURE G2427.8(4) DIRECT-VENT HOT WATER BOILER
1131	FIGURE G2427.10.2.2 LISTED BENDABLE DOUBLE-WALL CONNECTOR FIGURE G2427.10.2.2 LISTED BENDABLE DOUBLE-WALL CONNECTOR TABLE G2427.10.2.4 (503.10.2.4) MINIMUM THICKNESS FOR GALVANIZED STEEL VENT CONNECTORS FOR LOW-HEAT APPLIANCES TABLE G2427.10.2.4 (503.10.2.4) MINIMUM THICKNESS FOR GALVANIZED STEEL VENT CONNECTORS FOR LOW-HEAT APPLIANCES
1133	FIGURE G2427.10.3.4(1) MANIFOLD SIZING FIGURE G2427.10.3.4(1) MANIFOLD SIZING FIGURE G2427.10.3.4(2) COMMON VENT OFFSET AND MANIFOLD FIGURE G2427.10.3.4(2) COMMON VENT OFFSET AND MANIFOLD
1134	FIGURE G2427.10.4.1 OPPOSING OPENINGS IN CHIMNEY FIGURE G2427.10.4.1 OPPOSING OPENINGS IN CHIMNEY TABLE G2427.10.5 (503.10.5)a CLEARANCES FOR CONNECTORS TABLE G2427.10.5 (503.10.5)a CLEARANCES FOR CONNECTORS
1135	FIGURE G2427.10.9 VENT HEIGHT FIGURE G2427.10.9 VENT HEIGHT
1137	FIGURE G2427.10.14 TYPE B VENT CONNECTOR PENETRATIONS FIGURE G2427.10.14 TYPE B VENT CONNECTOR PENETRATIONS
1138	FIGURE G2427.12.1 DRAFT-HOOD-EQUIPPED APPLIANCE FIGURE G2427.12.1 DRAFT-HOOD-EQUIPPED APPLIANCE
1140	FIGURE G2427.14 AUTOMATIC VENT DAMPERS FIGURE G2427.14 AUTOMATIC VENT DAMPERS
1141	SECTION G2428 (504) – SIZING OF CATEGORY I APPLIANC EVENTING SYS SECTION G2428 (504) – SIZING OF CATEGORY I APPLIANC EVENTING SYS
1142	FIGURE G2428.1(1) COMBUSTION PROCESS FOR NATURAL GAS FIGURE G2428.1(1) COMBUSTION PROCESS FOR NATURAL GAS FIGURE G2428.1(2) FUEL GAS COMPOSITION FIGURE G2428.1(2) FUEL GAS COMPOSITION FIGURE G2428.1(3) DRAFT-HOOD APPLIANCE COMPARED TO FAN-ASSISTED APPLIANCE FIGURE G2428.1(3) DRAFT-HOOD APPLIANCE COMPARED TO FAN-ASSISTED APPLIANCE FIGURE G2428.1(4) ILLUSTRATION OF THE BASIC PRINCIPLE OF FAN-ASSISTED COMBUSTIO FIGURE G2428.1(4) ILLUSTRATION OF THE BASIC PRINCIPLE OF FAN-ASSISTED COMBUSTIO
1144	FIGURE G2428.1(5) FAN-ASSISTED HOT WATER BOILER FIGURE G2428.1(5) FAN-ASSISTED HOT WATER BOILER FIGURE G2428.2(1) EXAMPLE OF INDIVIDUAL VENT DIMENSIONS FIGURE G2428.2(1) EXAMPLE OF INDIVIDUAL VENT DIMENSIONS
1145	FIGURE G2428.2(2) INDIVIDUAL VENT—LATERAL AND HEIGHT FIGURE G2428.2(2) INDIVIDUAL VENT—LATERAL AND HEIGHT
1146	FIGURE 2428.2.1 CATEGORY I NATURAL DRAFT HOT WATER BOILER WITH DRAFT HOOD AND AUTOMATIC VENT DAMPER FIGURE 2428.2.1 CATEGORY I NATURAL DRAFT HOT WATER BOILER WITH DRAFT HOOD AND AUTOMATIC VENT DAMPER
1148	TABLE G2428.2(1) [504.2(1)] TYPE B DOUBLE-WALL GAS VENT TABLE G2428.2(1) [504.2(1)] TYPE B DOUBLE-WALL GAS VENT
1149	TABLE G2428.2(1) [504.2(1)]—continued TYPE B DOUBLE-WALL GAS VENT TABLE G2428.2(1) [504.2(1)]—continued TYPE B DOUBLE-WALL GAS VENT
1150	TABLE G2428.2(2) [504.2(2)]TYPE B DOUBLE-WALL GAS VENT TABLE G2428.2(2) [504.2(2)]TYPE B DOUBLE-WALL GAS VENT
1151	TABLE G2428.2(2) [504.2(2)]—continued TYPE B DOUBLE-WALL GAS VENT TABLE G2428.2(2) [504.2(2)]—continued TYPE B DOUBLE-WALL GAS VENT
1152	FIGURE G2428.2.9(1) MASONRY CHIMNEY COMPARED TO TYPE B VENT FIGURE G2428.2.9(1) MASONRY CHIMNEY COMPARED TO TYPE B VENT
1155	FIGURE G2428.3(1) COMBINED VENT DIMENSIONS FIGURE G2428.3(1) COMBINED VENT DIMENSIONS
1157	FIGURE G2428.3(2) FAN AND NAT VENT SIZING EXAMPLE FIGURE G2428.3(2) FAN AND NAT VENT SIZING EXAMPLE
1159	TABLE G2428.3.2 (504.3.2) MAXIMUM VENT CONNECTOR LENGTH TABLE G2428.3.2 (504.3.2) MAXIMUM VENT CONNECTOR LENGTH
1160	FIGURE G2428.3.5 COMMON VENT OFFSET IN ATTIC FOR THE PURPOSE OF AVOIDING A STREET-SIDE ROOF PENETRATION FIGURE G2428.3.5 COMMON VENT OFFSET IN ATTIC FOR THE PURPOSE OF AVOIDING A STREET-SIDE ROOF PENETRATION
1161	FIGURE G2428.3.6(1) OFFSET IN COMMON VENT AND CONNECTORS FIGURE G2428.3.6(1) OFFSET IN COMMON VENT AND CONNECTORS
1162	FIGURE G2428.3.6(2) TYPE B VENT ADJUSTABLE 45-DEGREE ELBOW FITTING FIGURE G2428.3.6(2) TYPE B VENT ADJUSTABLE 45-DEGREE ELBOW FITTING FIGURE G2428.3.6(3) TYPE B VENT ADJUSTABLE 90-DEGREE ELBOW FITTING FIGURE G2428.3.6(3) TYPE B VENT ADJUSTABLE 90-DEGREE ELBOW FITTING
1163	FIGURE G2428.3.9(1) TYPE B VENT REDUCING TEE FIGURE G2428.3.9(1) TYPE B VENT REDUCING TEE FIGURE G2428.3.9(2) TYPE B VENT REDUCING WYE FIGURE G2428.3.9(2) TYPE B VENT REDUCING WYE FIGURE G2428.3.9.1 SINGLE-WALL TEES AND WYES PROHIBITED IN TYPE B COMMON VENT SYSTEMS FIGURE G2428.3.9.1 SINGLE-WALL TEES AND WYES PROHIBITED IN TYPE B COMMON VENT SYSTEMS
1164	FIGURE G2428.3.11 CONNECTOR RISE FIGURE G2428.3.11 CONNECTOR RISE
1166	TABLE G2428.3(1) [504.3(1)] TYPE B DOUBLE-WALL VENT TABLE G2428.3(1) [504.3(1)] TYPE B DOUBLE-WALL VENT
1167	TABLE G2428.3(2) [504.3(2)] TYPE B DOUBLE-WALL TABLE G2428.3(2) [504.3(2)] TYPE B DOUBLE-WALL
1168	TABLE G2428.3(3) [504.3(3)] MASONRY CHIMNEY TABLE G2428.3(3) [504.3(3)] MASONRY CHIMNEY
1169	TABLE G2428.3(4) [504.3(4)] MASONRY CHIMNEY TABLE G2428.3(4) [504.3(4)] MASONRY CHIMNEY
1170	SECTION G2429 (505) – DIRECT-VENT, INTEGRAL VENT, MECHANICAL VENT AND VENTILATION/EXHAUSTHOOD VENTING SECTION G2429 (505) – DIRECT-VENT, INTEGRAL VENT, MECHANICAL VENT AND VENTILATION/EXHAUSTHOOD VENTING SECTION G2430 (506) – FACTORY-BUILT CHIMNEYS SECTION G2430 (506) – FACTORY-BUILT CHIMNEYS FIGURE G2430.1(1) FACTORY-BUILT CHIMNEY FIGURE G2430.1(1) FACTORY-BUILT CHIMNEY FIGURE G2430.1(2) FACTORY BUILT AIR-COOLED CHIMNEY SYSTEM FIGURE G2430.1(2) FACTORY BUILT AIR-COOLED CHIMNEY SYSTEM SECTION G2431 (601) – GENERAL SECTION G2431 (601) – GENERAL
1171	SECTION G2432 (602) – DECORATIVE APPLIANCES FOR INSTALLATION IN FIREPLACES SECTION G2432 (602) – DECORATIVE APPLIANCES FOR INSTALLATION IN FIREPLACES FIGURE G2432.1 VENTED GAS LOG SET FIGURE G2432.1 VENTED GAS LOG SET
1172	SECTION G2433 (603) – LOG LIGHTERS SECTION G2433 (603) – LOG LIGHTERS
1173	FIGURE G2432.2(1) COMBINATION GAS CONTROL FIGURE G2432.2(1) COMBINATION GAS CONTROL FIGURE G2432.2(2) COMBINATION GAS CONTROL FOR APPLIANCES FIGURE G2432.2(2) COMBINATION GAS CONTROL FOR APPLIANCES SECTION G2434 (604) – VENTED GAS FIREPLACES (DECORATIVE APPLIANCES) SECTION G2434 (604) – VENTED GAS FIREPLACES (DECORATIVE APPLIANCES)
1174	FIGURE G2434.1(1) VENTED DECORATIVE APPLIANCE FIGURE G2434.1(1) VENTED DECORATIVE APPLIANCE FIGURE G2434.1(2) DIRECT-VENT DECORATIVE APPLIANCE FIGURE G2434.1(2) DIRECT-VENT DECORATIVE APPLIANCE FIGURE G2434.1(3) DIRECT-VENT DECORATIVE APPLIANCE FIGURE G2434.1(3) DIRECT-VENT DECORATIVE APPLIANCE SECTION G2435 (605) VENTED GAS FIREPLACE HEATERS SECTION G2435 (605) VENTED GAS FIREPLACE HEATERS
1175	FIGURE G2435.1 VENTED GAS FIREPLACE HEATER FIGURE G2435.1 VENTED GAS FIREPLACE HEATER SECTION G2436 (608) – VENTED WALL FURNACES SECTION G2436 (608) – VENTED WALL FURNACES SECTION G2437 (609) – FLOOR FURNACES SECTION G2437 (609) – FLOOR FURNACES
1176	FIGURE G2437.1 FLOOR FURNACE FIGURE G2437.1 FLOOR FURNACE
1177	SECTION G2438 (613) – CLOTHES DRYERS SECTION G2438 (613) – CLOTHES DRYERS FIGURE G2438.1 TYPE I CLOTHES DRYER LABEL FIGURE G2438.1 TYPE I CLOTHES DRYER LABEL SECTION G2439 (614) – CLOTHES DRYER EXHAUST SECTION G2439 (614) – CLOTHES DRYER EXHAUST
1180	FIGURE G2439.5.3 DRYER EXHAUST DUCT PROTECTION FIGURE G2439.5.3 DRYER EXHAUST DUCT PROTECTION
1181	FIGURE G2439.5.6 LENGTH LABEL FIGURE G2439.5.6 LENGTH LABEL TABLE G2439.5.5.1 (TABLE 614.6.5.1) DRYER EXHAUST DUCT FITTING EQUIVALENT LENGTH TABLE G2439.5.5.1 (TABLE 614.6.5.1) DRYER EXHAUST DUCT FITTING EQUIVALENT LENGTH SECTION G2440 (615) – SAUNA HEATERS SECTION G2440 (615) – SAUNA HEATERS
1182	SECTION G2441 (617) – POOL AND SPA HEATERS SECTION G2441 (617) – POOL AND SPA HEATERS SECTION G2442 (618) – FORCED-AIR WARM-AIR FURNACES SECTION G2442 (618) – FORCED-AIR WARM-AIR FURNACES
1184	SECTION G2443 (619) – CONVERSION BURNERS SECTION G2443 (619) – CONVERSION BURNERS SECTION G2444 (620) – UNIT HEATERS SECTION G2444 (620) – UNIT HEATERS
1185	FIGURE G2444.1(1) DIRECT-VENT UNIT HEATER FIGURE G2444.1(1) DIRECT-VENT UNIT HEATER FIGURE G2444.1(2) POWER-VENTED UNIT HEATER FIGURE G2444.1(2) POWER-VENTED UNIT HEATER
1186	FIGURE G2444.1(3) UNIT HEATER VENTING (TYPICAL) FIGURE G2444.1(3) UNIT HEATER VENTING (TYPICAL) FIGURE G2444.1(4) DRAFT-HOOD-EQUIPPED UNIT HEATER FIGURE G2444.1(4) DRAFT-HOOD-EQUIPPED UNIT HEATER FIGURE G2444.1(5) FUNDAMENTAL COMPONENTS OF UNIT HEATER FIGURE G2444.1(5) FUNDAMENTAL COMPONENTS OF UNIT HEATER
1187	SECTION G2445 (621) – UNVENTED ROOM HEATERS SECTION G2445 (621) – UNVENTED ROOM HEATERS FIGURE G2445.1(1) UNVENTED ROOM HEATER FIGURE G2445.1(1) UNVENTED ROOM HEATER FIGURE G2445.1(2) UNVENTED ROOM HEATER FIGURE G2445.1(2) UNVENTED ROOM HEATER
1188	FIGURE G2445.7.1 FIREBOX FOR UNVENTED ROOM HEATER FIGURE G2445.7.1 FIREBOX FOR UNVENTED ROOM HEATER
1189	SECTION G2446 (622) VENTED ROOM HEATERS SECTION G2446 (622) VENTED ROOM HEATERS FIGURE G2446.1 VENTED ROOM HEATER FIGURE G2446.1 VENTED ROOM HEATER SECTION G2447 (623) COOKING APPLIANCES SECTION G2447 (623) COOKING APPLIANCES
1190	FIGURE G2447.3(1) DOMESTIC (HOUSEHOLD) RANGE FIGURE G2447.3(1) DOMESTIC (HOUSEHOLD) RANGE FIGURE G2447.3(2) HOUSEHOLD-TYPE COOKING APPLIANCE LABEL FIGURE G2447.3(2) HOUSEHOLD-TYPE COOKING APPLIANCE LABEL SECTION G2448 (624) – WATER HEATERS SECTION G2448 (624) – WATER HEATERS
1191	FIGURE G2448.2(1) DIRECT-VENT WATER HEATER DESIGNED FOR BOTH POTABLE WATER HEATING AND SPACE HEATING APPLICATIONS FIGURE G2448.2(1) DIRECT-VENT WATER HEATER DESIGNED FOR BOTH POTABLE WATER HEATING AND SPACE HEATING APPLICATIONS FIGURE G2448.2(2) WATER HEATER LABEL INDICATING SUITABILITY FOR BOTH POTABLE WATER HEATING AND SPACE HEATING FIGURE G2448.2(2) WATER HEATER LABEL INDICATING SUITABILITY FOR BOTH POTABLE WATER HEATING AND SPACE HEATING
1192	SECTION G2449 (627) – AIR CONDITIONING APPLIANCES SECTION G2449 (627) – AIR CONDITIONING APPLIANCES SECTION G2450 (628) – ILLUMINATING APPLIANCES SECTION G2450 (628) – ILLUMINATING APPLIANCES
1193	SECTION G2451 (630) – INFRARED RADIANT HEATERS SECTION G2451 (630) – INFRARED RADIANT HEATERS FIGURE G2451.1(1) CERAMIC BURNER INFRARED RADIANT HEATER FIGURE G2451.1(1) CERAMIC BURNER INFRARED RADIANT HEATER FIGURE G2451.1(2) CERAMIC BURNER INFRARED RADIANT HEATER FIGURE G2451.1(2) CERAMIC BURNER INFRARED RADIANT HEATER
1194	FIGURE G2451.1(3) TUBE-TYPE INFRARED RADIANT HEATER FIGURE G2451.1(3) TUBE-TYPE INFRARED RADIANT HEATER FIGURE G2451.1(4) SAMPLE LABEL INFRARED RADIANT TUBE HEATER FIGURE G2451.1(4) SAMPLE LABEL INFRARED RADIANT TUBE HEATER
1195	SECTION G2452 (631) – BOILERS SECTION G2452 (631) – BOILERS FIGURE G2452.1 STEAM HEATING BOILER WITH GAUGE-GLASS,LOW WATER CUTOFF CONTROL, PRESSURE GAUGE, PRESSURE LIMIT CONTROL AND AUTOMATIC VENT DAMPER FIGURE G2452.1 STEAM HEATING BOILER WITH GAUGE-GLASS,LOW WATER CUTOFF CONTROL, PRESSURE GAUGE, PRESSURE LIMIT CONTROL AND AUTOMATIC VENT DAMPER FIGURE G2452.2(1) ELECTRONIC PROBE-TYPE LOW-WATER CUTOFF CONTROL WITH GAUGE GLASS AND TRI-COCKS FOR STEAM BOILER APPLICATION FIGURE G2452.2(1) ELECTRONIC PROBE-TYPE LOW-WATER CUTOFF CONTROL WITH GAUGE GLASS AND TRI-COCKS FOR STEAM BOILER APPLICATION
1196	FIGURE G2452.2(2) ELECTRONIC PROBE-TYPE LOW-WATER CUTOFF CONTROL FOR HOT WATER BOILER APPLICATIO FIGURE G2452.2(2) ELECTRONIC PROBE-TYPE LOW-WATER CUTOFF CONTROL FOR HOT WATER BOILER APPLICATIO FIGURE G2452.2(3) ELECTRONIC PROBE-TYPE LOW-WATER CUTOFF CONTROL FOR HOT WATER BOILER APPLICATION FIGURE G2452.2(3) ELECTRONIC PROBE-TYPE LOW-WATER CUTOFF CONTROL FOR HOT WATER BOILER APPLICATION TABLE G2453.1 (634.1) FREE OPENING AREA OF CHIMNEY DAMPER FOR VENTING FLUE GASES FROM UNLISTED DECORATIVE APPLIANCES FOR INSTALLATION IN VENTED FIREPLACES TABLE G2453.1 (634.1) FREE OPENING AREA OF CHIMNEY DAMPER FOR VENTING FLUE GASES FROM UNLISTED DECORATIVE APPLIANCES FOR INSTALLATION IN VENTED FIREPLACES
1197	BIBLIOGRAPHY BIBLIOGRAPHY
1199	PART VII – PLUMBING PART VII – PLUMBING CHAPTER 25: PLUMBING ADMINISTRATION CHAPTER 25: PLUMBING ADMINISTRATION GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION P2501 – GENERAL SECTION P2501 – GENERAL SECTION P2502 – EXISTING PLUMBING SYSTEMS SECTION P2502 – EXISTING PLUMBING SYSTEMS
1200	SECTION P2503 – INSPECTION AND TESTS SECTION P2503 – INSPECTION AND TESTS
1202	FIGURE P2503.6(1) TESTING OF FIELD-FABRICATED SHOWER LINER FIGURE P2503.6(1) TESTING OF FIELD-FABRICATED SHOWER LINER FIGURE P2503.6(2) INSTALLED SHOWER LINER READY FOR TESTING FIGURE P2503.6(2) INSTALLED SHOWER LINER READY FOR TESTING
1203	FIGURE P2503.9 – IMPROPER GAUGE FOR TEST(DIAL INCREMENTS TOO LARGE) FIGURE P2503.9 – IMPROPER GAUGE FOR TEST(DIAL INCREMENTS TOO LARGE)
1204	BIBIOGRAPHY BIBIOGRAPHY
1205	CHAPTER 26: GENERAL PLUMBING REQUIRMENTS CHAPTER 26: GENERAL PLUMBING REQUIRMENTS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION P2601 – GENERAL SECTION P2601 – GENERAL SECTION P2602 – INDIVIDUAL WATER SUPPLY AND SEWAGE DISPOSAL SECTION P2602 – INDIVIDUAL WATER SUPPLY AND SEWAGE DISPOSAL
1206	SECTION P2603 – STRUCTURAL AND PIPING PROTECTION SECTION P2603 – STRUCTURAL AND PIPING PROTECTION
1207	FIGURE P2603.2(1) NOTCHING AND BORING IN A WOOD STUD WALL FIGURE P2603.2(1) NOTCHING AND BORING IN A WOOD STUD WALL
1208	FIGURE P2603.2(2) VIOLATION: NOTCHES TOO DEEP IN STUD FIGURE P2603.2(2) VIOLATION: NOTCHES TOO DEEP IN STUD FIGURE P2603.2(3) VIOLATION: EXTERIOR STUD NOTCHED TOO DEEP FIGURE P2603.2(3) VIOLATION: EXTERIOR STUD NOTCHED TOO DEEP
1209	FIGURE P2603.2(4) VIOLATION: EXTERIOR STUD COMPLETELY SEVERED FIGURE P2603.2(4) VIOLATION: EXTERIOR STUD COMPLETELY SEVERED FIGURE P2603.2(5) VIOLATION: WALL TOP PLATE NOT REINFORCED FIGURE P2603.2(5) VIOLATION: WALL TOP PLATE NOT REINFORCED
1210	FIGURE P2603.2(6) VIOLATION: WALL TOP PLATE NOT REINFORCED FIGURE P2603.2(6) VIOLATION: WALL TOP PLATE NOT REINFORCED
1211	FIGURE P2603.2(7) LAMINATED VENEER LUMBER BEAM FIGURE P2603.2(7) LAMINATED VENEER LUMBER BEAM FIGURE P2603.2(8) VIOLATION: TOP CHORD OF TRUSS NOTCHED FIGURE P2603.2(8) VIOLATION: TOP CHORD OF TRUSS NOTCHED
1212	FIGURE P2603.2(9) VIOLATION: HOLE IN BOTTOM CHORD OF ROOF TRUSS FIGURE P2603.2(9) VIOLATION: HOLE IN BOTTOM CHORD OF ROOF TRUSS FIGURE P2603.2(10) VIOLATION: TOP CHORD OF I-JOIST COMPLETELY SEVERED FIGURE P2603.2(10) VIOLATION: TOP CHORD OF I-JOIST COMPLETELY SEVERED
1213	FIGURE P2603.2(11) VIOLATION: I-JOIST WEB HOLES IRREGULAR SHAPE, TOO LARGE, TOO CLOSE TOGETHER FIGURE P2603.2(11) VIOLATION: I-JOIST WEB HOLES IRREGULAR SHAPE, TOO LARGE, TOO CLOSE TOGETHER
1214	FIGURE P2603.2.1(1) REQUIRED SHIELD PLATES FIGURE P2603.2.1(1) REQUIRED SHIELD PLATES FIGURE P2603.2.1(2) PIPE PROTECTION VIOLATION FIGURE P2603.2.1(2) PIPE PROTECTION VIOLATION
1215	FIGURE P2603.4(1) PIPE PROTECTION FIGURE P2603.4(1) PIPE PROTECTION FIGURE P2603.4(2) ANNULAR SPACE PROTECTION FIGURE P2603.4(2) ANNULAR SPACE PROTECTION
1216	FIGURE P2603.5 PIPE PROTECTION FIGURE P2603.5 PIPE PROTECTION SECTION P2604 – TRENCHING AND BACKFILLING SECTION P2604 – TRENCHING AND BACKFILLING
1217	FIGURE P2603.6 PROTECTION AGAINST FREEZING FIGURE P2603.6 PROTECTION AGAINST FREEZING SECTION P2605 – SUPPORT SECTION P2605 – SUPPORT
1218	FIGURE P2604.4 PIPE LOCATION WITH RESPECT TO FOOTINGS FIGURE P2604.4 PIPE LOCATION WITH RESPECT TO FOOTINGS SECTION P2606 – WATERPROOFING OF OPENINGS SECTION P2606 – WATERPROOFING OF OPENINGS FIGURE P2606.1 ROOF PENETRATIONS FIGURE P2606.1 ROOF PENETRATIONS
1219	TABLE P2605.1 PIPING SUPPORT TABLE P2605.1 PIPING SUPPORT
1220	FIGURE P2605.1(1) SWAY BRACING FIGURE P2605.1(1) SWAY BRACING FIGURE P2605.1(2) POINT OF SAG BETWEEN HANGERS FIGURE P2605.1(2) POINT OF SAG BETWEEN HANGERS FIGURE P2605.1(3) LOCATION OF HANGERS FIGURE P2605.1(3) LOCATION OF HANGERS
1221	SECTION P2607 – WORKMANSHIP SECTION P2607 – WORKMANSHIP FIGURE P2607.1 PREPARATION OF PIPE END FIGURE P2607.1 PREPARATION OF PIPE END SECTION P2608 – MATERIALS EVALUATION AND LISTING SECTION P2608 – MATERIALS EVALUATION AND LISTING
1222	TABLE P2608.4 PRODUCTS AND MATERIALS REQUIRING THIRD-PARTY TESTING AND THIRD-PARTY CERTIFICATION TABLE P2608.4 PRODUCTS AND MATERIALS REQUIRING THIRD-PARTY TESTING AND THIRD-PARTY CERTIFICATION FIGURE P2608.4 SAMPLE MARKING OF PVC PRESSURE PIPE FIGURE P2608.4 SAMPLE MARKING OF PVC PRESSURE PIPE
1223	BIBLIOGRAPHY BIBLIOGRAPHY
1225	CHAPTER 27: PLUMBING FIXTURES CHAPTER 27: PLUMBING FIXTURES GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION P2701 – FIXTURES, FAUCETS AND FIXTURE FITTINGS SECTION P2701 – FIXTURES, FAUCETS AND FIXTURE FITTINGS SECTION P2702 – FIXTURE ACCESSORIES SECTION P2702 – FIXTURE ACCESSORIES
1226	TABLE P2701.1 PLUMBING FIXTURES, FAUCETS AND FIXTURE FITTINGS TABLE P2701.1 PLUMBING FIXTURES, FAUCETS AND FIXTURE FITTINGS
1227	FIGURE P2702.4 WALL-MOUNTED WATER CLOSET FIGURE P2702.4 WALL-MOUNTED WATER CLOSET SECTION P2703 – TAIL PIECES SECTION P2703 – TAIL PIECES SECTION P2704 – ACCESS TO CONNECTIONS SECTION P2704 – ACCESS TO CONNECTIONS
1228	SECTION P2705 – INSTALLATION SECTION P2705 – INSTALLATION FIGURE P2705.1 FIXTURES CLEARANCES FIGURE P2705.1 FIXTURES CLEARANCES
1229	SECTION P2706 – WASTE RECEPTORS SECTION P2706 – WASTE RECEPTORS FIGURE P2706.1 WASTE RECEPTOR FIGURE P2706.1 WASTE RECEPTOR
1230	FIGURE P2706.2 STANDPIPES FIGURE P2706.2 STANDPIPES FIGURE P2706.2.1 LAUNDRY TUB CONNECTION TO STANDPIPE FIGURE P2706.2.1 LAUNDRY TUB CONNECTION TO STANDPIPE
1231	SECTION P2707 – DIRECTIONAL FITTINGS SECTION P2707 – DIRECTIONAL FITTINGS SECTION P2708 – SHOWERS SECTION P2708 – SHOWERS
1232	FIGURE P2708.1 SHOWER COMPARTMENT FIGURE P2708.1 SHOWER COMPARTMENT FIGURE P2708.2(1) SECURING SHOWER RISER FIGURE P2708.2(1) SECURING SHOWER RISER
1233	FIGURE P2708.2(2) SPECIAL BRACKET FOR SHOWER RISER (Photo courtesy of Holdrite-Hubbard Enterprises) FIGURE P2708.2(2) SPECIAL BRACKET FOR SHOWER RISER (Photo courtesy of Holdrite-Hubbard Enterprises) FIGURE P2708.3 TEMPERATURE BURN CHART FIGURE P2708.3 TEMPERATURE BURN CHART
1234	SECTION P2709 – SHOWER RECEPTORS SECTION P2709 – SHOWER RECEPTORS FIGURE P2709.1 SHOWER DRAIN AND PAN CONNECTION FIGURE P2709.1 SHOWER DRAIN AND PAN CONNECTION
1235	SECTION P2710 – SHOWER WALLS SECTION P2710 – SHOWER WALLS SECTION P2711 – LAVATORIES SECTION P2711 – LAVATORIES
1236	SECTION P2712 – WATER CLOSETS SECTION P2712 – WATER CLOSETS
1237	SECTION P2713 – BATHTUBS SECTION P2713 – BATHTUBS
1238	FIGURE P2713 3 HOT WATER TEMPERATURE LIMITS FIGURE P2713 3 HOT WATER TEMPERATURE LIMITS SECTION P2714 – SINKS SECTION P2714 – SINKS SECTION P2715 – LAUNDRY TUBS SECTION P2715 – LAUNDRY TUBS SECTION P2716 – FOOD WASTE GRINDER SECTION P2716 – FOOD WASTE GRINDER
1239	SECTION P2717 – DISHWASHING MACHINES SECTION P2717 – DISHWASHING MACHINES FIGURE P2717.2 DISHWASHER WASTE CONNECTIONS FIGURE P2717.2 DISHWASHER WASTE CONNECTIONS SECTION P2718 – CLOTHES WASHING MACHINE SECTION P2718 – CLOTHES WASHING MACHINE
1240	SECTION P2719 – FLOOR DRAINS SECTION P2719 – FLOOR DRAINS SECTION P2720 – WHIRLPOOL BATHTUBS SECTION P2720 – WHIRLPOOL BATHTUBS FIGURE P2720.1(1) NONCOMPLIANT WHIRLPOOL BATHTUB PUMP ACCESS FIGURE P2720.1(1) NONCOMPLIANT WHIRLPOOL BATHTUB PUMP ACCESS
1241	FIGURE P2720.1(2) NONCOMPLIANT WHIRLPOOL BATHTUB PUMP ACCESS FIGURE P2720.1(2) NONCOMPLIANT WHIRLPOOL BATHTUB PUMP ACCESS SECTION P2721 – BIDET INSTALLATIONS SECTION P2721 – BIDET INSTALLATIONS SECTION P2722 – FIXTURE FITTING SECTION P2722 – FIXTURE FITTING
1242	SECTION P2723 – MACERATING TOILET SYSTEMS SECTION P2723 – MACERATING TOILET SYSTEMS SECTION P2724 – SPECIALTY TEMPERATURE CONTROL DEVICES AND VALVES SECTION P2724 – SPECIALTY TEMPERATURE CONTROL DEVICES AND VALVES
1243	BIBLIOGRAPHY BIBLIOGRAPHY
1245	CHAPTER 28: WATER HEATERS CHAPTER 28: WATER HEATERS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION P2801 – GENERAL SECTION P2801 – GENERAL
1246	FIGURE P2801.5 WATER HEATER IN DRAIN PAN FIGURE P2801.5 WATER HEATER IN DRAIN PAN
1248	SECTION P2802 – WATER HEATERS USED FOR SPACE HEATING SECTION P2802 – WATER HEATERS USED FOR SPACE HEATING SECTION P2803 – RELIEF VALVES SECTION P2803 – RELIEF VALVES
1249	FIGURE P2801.7 EXAMPLE OF SEISMIC RESTRAINT FOR SMALL WATER HEATERS FIGURE P2801.7 EXAMPLE OF SEISMIC RESTRAINT FOR SMALL WATER HEATERS
1250	FIGURE P2803.4 TEMPERATURE AND PRESSURE RELIEF VALVE INSTALLATION FIGURE P2803.4 TEMPERATURE AND PRESSURE RELIEF VALVE INSTALLATION
1252	FIGURE P2803.7 BOTTOM FED WATER HEATER FIGURE P2803.7 BOTTOM FED WATER HEATER BIBLIOGRAPHY BIBLIOGRAPHY
1255	CHAPTER 29: WATER SUPPLY AND DISTRIBUTION CHAPTER 29: WATER SUPPLY AND DISTRIBUTION GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION P2901 – GENERAL SECTION P2901 – GENERAL SECTION P2902 – PROTECTION OF POTABLE WATER SUPPLY SECTION P2902 – PROTECTION OF POTABLE WATER SUPPLY
1256	FIGURE P2902.1(1) EXAMPLE OF A SIMPLE SIPHON FIGURE P2902.1(1) EXAMPLE OF A SIMPLE SIPHON
1257	FIGURE P2902.1(2) EXAMPLE OF ASPIRATION OR VENTURI PRINCIPLE FIGURE P2902.1(2) EXAMPLE OF ASPIRATION OR VENTURI PRINCIPLE FIGURE P2902.1(3) EXAMPLE OF PUMP CAUSING NEGATIVE PRESSURE FIGURE P2902.1(3) EXAMPLE OF PUMP CAUSING NEGATIVE PRESSURE
1258	TABLE P2902.3 APPLICATION FOR BACKFLOW PREVENTERS TABLE P2902.3 APPLICATION FOR BACKFLOW PREVENTERS
1259	TABLE P2902.3.1 MINIMUM AIR GAPS TABLE P2902.3.1 MINIMUM AIR GAPS FIGURE P2902.3.1(1) AIR GAP FOR A LAVATORY FAUCET FIGURE P2902.3.1(1) AIR GAP FOR A LAVATORY FAUCET
1260	FIGURE P2902.3.1(2) AIR GAPS—LOCATED NEAR SINGLE WALL FIGURE P2902.3.1(2) AIR GAPS—LOCATED NEAR SINGLE WALL FIGURE P2902.3.1(3) AIR GAPS—LOCATED NEAR INTERSECTING WALLS FIGURE P2902.3.1(3) AIR GAPS—LOCATED NEAR INTERSECTING WALLS
1262	FIGURE P2902.3.4 PRESSURE VACUUM BREAKER FIGURE P2902.3.4 PRESSURE VACUUM BREAKER
1263	FIGURE P2902.3.5 REDUCED PRESSURE PRINCIPLE BACKFLOW PREVENTER FIGURE P2902.3.5 REDUCED PRESSURE PRINCIPLE BACKFLOW PREVENTER
1264	FIGURE P2902.4.3 HOSE CONNECTION VACUUM BREAKER FIGURE P2902.4.3 HOSE CONNECTION VACUUM BREAKER
1266	SECTION P2903 – WATER-SUPPLY SYSTEM SECTION P2903 – WATER-SUPPLY SYSTEM
1267	TABLE P2903.1 REQUIRED CAPACITIES AT POINT OF OUTLET DISCHARGE TABLE P2903.1 REQUIRED CAPACITIES AT POINT OF OUTLET DISCHARGE TABLEP2903.2 MAXIMUM FLOW RATES AND CONSUMPTION FOR PLUMBING FIXTURES AND FIXTURE FITTINGSb TABLEP2903.2 MAXIMUM FLOW RATES AND CONSUMPTION FOR PLUMBING FIXTURES AND FIXTURE FITTINGSb
1268	FIGURE P2903.4 EXAMPLE METHOD OF THERMAL EXPANSION FIGURE P2903.4 EXAMPLE METHOD OF THERMAL EXPANSION
1269	FIGURE 2903.5 EXAMPLE OF MECHANICAL WATER HAMMER ARRESTORS FIGURE 2903.5 EXAMPLE OF MECHANICAL WATER HAMMER ARRESTORS
1270	TABLE P2903.6 WATER-SUPPLY FIXTURE-UNIT VALUES FOR VARIOUS PLUMBING FIXTURES AND FIXTURE GROUPS TABLE P2903.6 WATER-SUPPLY FIXTURE-UNIT VALUES FOR VARIOUS PLUMBING FIXTURES AND FIXTURE GROUPS
1271	TABLE P2903.6(1) CONVERSIONS FROM WATER SUPPLY FIXTURE UNIT TO GALLON PER MINUTE FLOW RATES TABLE P2903.6(1) CONVERSIONS FROM WATER SUPPLY FIXTURE UNIT TO GALLON PER MINUTE FLOW RATES
1272	FIGURE P2903.8 SIMPLIFIED SCHEMATIC OF PARALLEL WATER DISTRIBUTION FIGURE P2903.8 SIMPLIFIED SCHEMATIC OF PARALLEL WATER DISTRIBUTION TABLE P2903.8.1 MANIFOLD SIZING TABLE P2903.8.1 MANIFOLD SIZING
1273	FIGURE P2903.9.1(1) CURB VALVE ON WATER SUPPLY FIGURE P2903.9.1(1) CURB VALVE ON WATER SUPPLY
1274	FIGURE P2903.9.1(2) VALVE AT ENTRANCE TO THE BUILDING AND ON THE DISCHARGE SIDE OF THE METER FIGURE P2903.9.1(2) VALVE AT ENTRANCE TO THE BUILDING AND ON THE DISCHARGE SIDE OF THE METER FIGURE P2903.9.1(3) DWELLING UNIT VALVE FIGURE P2903.9.1(3) DWELLING UNIT VALVE
1275	FIGURE P2903.9.5(1) FROST-PROOF YARD HYDRANT WITH STOP-AND-WASTE VALVE BELOW GRADE FIGURE P2903.9.5(1) FROST-PROOF YARD HYDRANT WITH STOP-AND-WASTE VALVE BELOW GRADE
1276	FIGURE P2903.9.5(2) VIOLATION: FROSTPROOF YARD HYDRANT CONNECTED TO WATER SERVICE LINE FIGURE P2903.9.5(2) VIOLATION: FROSTPROOF YARD HYDRANT CONNECTED TO WATER SERVICE LINE FIGURE P2903.9.5(3) SANITARY FROSTPROOF YARD HYDRANT FIGURE P2903.9.5(3) SANITARY FROSTPROOF YARD HYDRANT
1277	FIGURE P2903.9.5(4) PROPER INSTALLATION OF FROSTPROOF YARD HYDRANT WITH STOP-AND-WASTE VALVE BELOW GRADE FIGURE P2903.9.5(4) PROPER INSTALLATION OF FROSTPROOF YARD HYDRANT WITH STOP-AND-WASTE VALVE BELOW GRADE FIGURE P2903.10 TYPICAL FREEZE-PROOF HOSE BIBB INSTALLATION NOT REQUIRING SEPARATE VALVE FIGURE P2903.10 TYPICAL FREEZE-PROOF HOSE BIBB INSTALLATION NOT REQUIRING SEPARATE VALVE
1278	SECTION P2904 – DWELLING UNIT FIRE SPRINKLER SYSTEMS SECTION P2904 – DWELLING UNIT FIRE SPRINKLER SYSTEMS
1279	FIGURE P2904.2(1) PENDANT SPRINKLER FIGURE P2904.2(1) PENDANT SPRINKLER FIGURE P2904.2(2) HORIZONTAL SIDEWALL SPRINKLER FIGURE P2904.2(2) HORIZONTAL SIDEWALL SPRINKLER
1280	FIGURE P2904.2.2 SPRINKLER PLACEMENT NEAR CEILING-MOUNTED WARM AIR REGISTER FIGURE P2904.2.2 SPRINKLER PLACEMENT NEAR CEILING-MOUNTED WARM AIR REGISTER TABLE P2904.2.2 LOCATIONS WHERE INTERMEDIATE TEMPERATURE SPRINKLERS ARE REQUIRED TABLE P2904.2.2 LOCATIONS WHERE INTERMEDIATE TEMPERATURE SPRINKLERS ARE REQUIRED
1283	TABLE SPRINKLER MODE A, PENDENT, K = 3.1 TABLE SPRINKLER MODE A, PENDENT, K = 3.1 TABLE SPRINKLER MODEL B, PENDENT, K = 4.3 TABLE SPRINKLER MODEL B, PENDENT, K = 4.3 TABLE SPRINKLER MODEL C, HORIZONTAL SIDEWALL, DEFLECTOR, 4-6 INCHES FROM CEILING, K = 4.0 TABLE SPRINKLER MODEL C, HORIZONTAL SIDEWALL, DEFLECTOR, 4-6 INCHES FROM CEILING, K = 4.0 TABLE SPRINKLER MODEL D, HORIZONTAL SIDEWALL, DEFLECTOR 4-6 INCHES FROM CEILING, K = 4.3 TABLE SPRINKLER MODEL D, HORIZONTAL SIDEWALL, DEFLECTOR 4-6 INCHES FROM CEILING, K = 4.3
1285	EQUATION 29-1 EQUATION 29-1
1286	TABLE P2904.6.2(1) WATER SERVICE PRESSURE LOSS TABLE P2904.6.2(1) WATER SERVICE PRESSURE LOSS
1287	TABLE P2904.6.2(2) MINIMUM WATER METER PRESSURE LOSS (PLm) TABLE P2904.6.2(2) MINIMUM WATER METER PRESSURE LOSS (PLm)
1288	TABLE P2904.6.2(3) ELEVATION LOSS (PLe) TABLE P2904.6.2(3) ELEVATION LOSS (PLe)
1290	TABLE P2904.6.2(4) ALLOWABLE PIPE LENGTH FOR 3/4-INCH TYPE M COPPER WATER TUBING TABLE P2904.6.2(4) ALLOWABLE PIPE LENGTH FOR 3/4-INCH TYPE M COPPER WATER TUBING
1291	TABLE P2904.6.2(5) ALLOWABLE PIPE LENGTH FOR 1-INCH TYPE M COPPER WATER TUBING TABLE P2904.6.2(5) ALLOWABLE PIPE LENGTH FOR 1-INCH TYPE M COPPER WATER TUBING
1292	TABLE P2904.6.2(6) ALLOWABLE PIPE LENGTH FOR 3/4-INCH CPVC PIPE TABLE P2904.6.2(6) ALLOWABLE PIPE LENGTH FOR 3/4-INCH CPVC PIPE
1293	TABLE P2904.6.2(7) ALLOWABLE PIPE LENGTH FOR 1-INCH CPVC PIPE TABLE P2904.6.2(7) ALLOWABLE PIPE LENGTH FOR 1-INCH CPVC PIPE
1294	TABLE P2904.6.2(8) ALLOWABLE PIPE LENGTH FOR 3/4-INCH PEX TUBING TABLE P2904.6.2(8) ALLOWABLE PIPE LENGTH FOR 3/4-INCH PEX TUBING
1295	TABLE P2904.6.2(9) ALLOWABLE PIPE LENGTH FOR 1-INCH PEX TUBING TABLE P2904.6.2(9) ALLOWABLE PIPE LENGTH FOR 1-INCH PEX TUBING
1296	FIGURE P2904.6.2.2(1) BUILDING PLAN FIGURE P2904.6.2.2(1) BUILDING PLAN FIGURE P2904.6.2.2(2) LOCATIONS OF SPRINKLER FIGURE P2904.6.2.2(2) LOCATIONS OF SPRINKLER
1297	FIGURE P2904.6.2.2(3) PIPING TO SPRINKLER FIGURE P2904.6.2.2(3) PIPING TO SPRINKLER
1298	FIGURE P2904.8.1(1) SPRINKLER SYSTEM ROUGH-IN FIGURE P2904.8.1(1) SPRINKLER SYSTEM ROUGH-IN SECTION P2905 MATERIALS, JOINTS AND CONNECTIONS SECTION P2905 MATERIALS, JOINTS AND CONNECTIONS
1299	FIGURE P2904.8.1(2) SPRINKLER SHOWN WITHOUT TEMPORARY PROTECTIVE COVER INSTALLED FIGURE P2904.8.1(2) SPRINKLER SHOWN WITHOUT TEMPORARY PROTECTIVE COVER INSTALLED
1300	FIGURE P2905.3 BENDING FIGURE P2905.3 BENDING
1301	TABLE P2905.4 WATER SERVICE PIPE TABLE P2905.4 WATER SERVICE PIPE FIGURE P2905.4(1) WATER SERVICE MATERIAL TRANSITIONS FIGURE P2905.4(1) WATER SERVICE MATERIAL TRANSITIONS
1303	FIGURE P2905.4(2) SAMPLE MARKING OF PEX TUBING FIGURE P2905.4(2) SAMPLE MARKING OF PEX TUBING
1305	FIGURE P2905.4.2(1) SEPARATION OF WATER SERVICE AND BUILDING SEWER FIGURE P2905.4.2(1) SEPARATION OF WATER SERVICE AND BUILDING SEWER FIGURE P2905.4.2(2) WATER SERVICE CROSSING OVER BUILDING SEWER FIGURE P2905.4.2(2) WATER SERVICE CROSSING OVER BUILDING SEWER
1306	TABLE P2905.5 WATER DISTRIBUTION PIPE TABLE P2905.5 WATER DISTRIBUTION PIPE
1307	TABLE P2905.6 PIPE FITTINGS TABLE P2905.6 PIPE FITTINGS
1310	FIGURE P2905.14 PREPARATION OF PIPE END FIGURE P2905.14 PREPARATION OF PIPE END FIGURE P2905.15 TYPICAL FLARED JOINT FIGURE P2905.15 TYPICAL FLARED JOINT
1311	FIGURE P2905.15 HEAT APPLICATION OF BRAZED JOINT FIGURE P2905.15 HEAT APPLICATION OF BRAZED JOINT FIGURE P2905.17.1 DIELECTRIC UNION FIGURE P2905.17.1 DIELECTRIC UNION
1312	SECTION P2906 – CHANGES IN DIRECTION SECTION P2906 – CHANGES IN DIRECTION SECTION P2907 – SUPPORT SECTION P2907 – SUPPORT SECTION P2908 – DRINKING WATER TREATMENT UNITS SECTION P2908 – DRINKING WATER TREATMENT UNITS
1313	BIBLIOGRAPHY BIBLIOGRAPHY
1315	CHAPTER 30: SANITARY DRAINAGE CHAPTER 30: SANITARY DRAINAGE GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION P3001 – GENERAL SECTION P3001 – GENERAL
1316	SECTION P3002 – MATERIALS SECTION P3002 – MATERIALS
1317	TABLE P3002.1(1) ABOVE-GROUND DRAINAGE AND VENT PIPE TABLE P3002.1(1) ABOVE-GROUND DRAINAGE AND VENT PIPE TABLE P3002.1(2) UNDERGROUND BUILDING DRAINAGE AND VENT PIPE TABLE P3002.1(2) UNDERGROUND BUILDING DRAINAGE AND VENT PIPE
1318	TABLE P3002.2 BUILDING SEWER PIPE TABLE P3002.2 BUILDING SEWER PIPE
1319	TABLE P3002.3 PIPE FITTINGS TABLE P3002.3 PIPE FITTINGS SECTION P3003 – JOINTS AND CONNECTIONS SECTION P3003 – JOINTS AND CONNECTIONS
1327	SECTION P3004 – DETERMINING DRAINAGE FIXTURE UNITS SECTION P3004 – DETERMINING DRAINAGE FIXTURE UNITS SECTION P3005 – DRAINAGE SYSTEM SECTION P3005 – DRAINAGE SYSTEM TABLE P3005.1 FITTINGS FOR CHANGE IN DIRECTION TABLE P3005.1 FITTINGS FOR CHANGE IN DIRECTION
1328	TABLE P3004.1 DRAINAGE FIXTURE UNIT (d.f.u.) VALUES FOR VARIOUS PLUMBING FIXTURES TABLE P3004.1 DRAINAGE FIXTURE UNIT (d.f.u.) VALUES FOR VARIOUS PLUMBING FIXTURES
1329	FIGURE P3005.1(1) COMPARISON OF DIFFERENT 11/2-INCH LONG SWEEPS FOR VARIOUS PIPING MATERIALS FIGURE P3005.1(1) COMPARISON OF DIFFERENT 11/2-INCH LONG SWEEPS FOR VARIOUS PIPING MATERIALS FIGURE P3005.1(2) COMPARISON FOR 3-INCH COMBINATION WYE AND EIGHTH BEND FOR VARIOUS PIPING MATERIA FIGURE P3005.1(2) COMPARISON FOR 3-INCH COMBINATION WYE AND EIGHTH BEND FOR VARIOUS PIPING MATERIA
1330	FIGURE P3005.1(3) DRAINAGE PATTERN FITTINGS FIGURE P3005.1(3) DRAINAGE PATTERN FITTINGS FIGURE P3005.1(4) DRAINAGE PATTERN FITTINGS FIGURE P3005.1(4) DRAINAGE PATTERN FITTINGS
1331	FIGURE P3005.1(5) DIFFERENCE BETWEEN PVC PLASTIC 1/4-BEND SHORT SWEEP AND 1/4-BEND VENT ELBOW FIGURE P3005.1(5) DIFFERENCE BETWEEN PVC PLASTIC 1/4-BEND SHORT SWEEP AND 1/4-BEND VENT ELBOW FIGURE P3005.1(6) COMBINATION TEES FIGURE P3005.1(6) COMBINATION TEES FIGURE P3005.1(7) FITTING USES FIGURE P3005.1(7) FITTING USES
1332	FIGURE P3005.1.1 DOUBLE SANITARY TEE APPLICATION WITH WATER CLOSETS FIGURE P3005.1.1 DOUBLE SANITARY TEE APPLICATION WITH WATER CLOSETS
1333	FIGURE P3005.1.2(1) HEEL-INLET FITTINGS FIGURE P3005.1.2(1) HEEL-INLET FITTINGS FIGURE P3005.1.2(2) IMPROPER PIPING INSTALLATION FIGURE P3005.1.2(2) IMPROPER PIPING INSTALLATION
1335	FIGURE P3005.2.3(1) CLEANOUT LOCATIONS FIGURE P3005.2.3(1) CLEANOUT LOCATIONS FIGURE P3005.2.2 CLEANOUT LOCATIONS FIGURE P3005.2.2 CLEANOUT LOCATIONS
1336	FIGURE P3005.2.3(2) CLEANOUTS ON CONCEALED PIPING FIGURE P3005.2.3(2) CLEANOUTS ON CONCEALED PIPING FIGURE P3005.2.4 CLEANOUTS AT CHANGE OF DIRECTION FIGURE P3005.2.4 CLEANOUTS AT CHANGE OF DIRECTION
1337	FIGURE P3005.2.5 CLEARANCE FOR CLEANOUTS FIGURE P3005.2.5 CLEARANCE FOR CLEANOUTS FIGURE P3005.2.6 CLEANOUT AT BASE OF STACK FIGURE P3005.2.6 CLEANOUT AT BASE OF STACK
1338	FIGURE P3005.2.7 CLEANOUTS AT SEWER JUNCTION FIGURE P3005.2.7 CLEANOUTS AT SEWER JUNCTION
1340	FIGURE P3005.4 DRAIN LINE LAYOUT FIGURE P3005.4 DRAIN LINE LAYOUT TABLE P3005.4.1 MAXIMUM FIXTURE UNITS ALLOWEDTO BE CONNECTED TO BRANCHES AND STACKS TABLE P3005.4.1 MAXIMUM FIXTURE UNITS ALLOWEDTO BE CONNECTED TO BRANCHES AND STACKS
1341	TABLE P3005.4.2 MAXIMUM NUMBER OF FIXTURE UNITS ALLOWED TO BE CONNECTED TO THE BUILDING DRAIN,BUILDING DRAIN BRANCHES OR THE BUILDING SEWER TABLE P3005.4.2 MAXIMUM NUMBER OF FIXTURE UNITS ALLOWED TO BE CONNECTED TO THE BUILDING DRAIN,BUILDING DRAIN BRANCHES OR THE BUILDING SEWER SECTION P3006 – SIZING OF DRAIN PIPE OFFSETS SECTION P3006 – SIZING OF DRAIN PIPE OFFSETS
1342	SECTION P3007 – SUMPS AND EJECTORS SECTION P3007 – SUMPS AND EJECTORS FIGURE P3007.1 SUBMERSIBLE SEWAGE PUMP FIGURE P3007.1 SUBMERSIBLE SEWAGE PUMP
1343	FIGURE P3007.2 VERTICAL SUSPENDED WET-PIT SEWAGE PUMP FIGURE P3007.2 VERTICAL SUSPENDED WET-PIT SEWAGE PUMP
1345	FIGURE P3007.5(1) MACERATING TOILET SYSTEMS FIGURE P3007.5(1) MACERATING TOILET SYSTEMS
1346	SECTION P3008 – BACKWATER VALVES SECTION P3008 – BACKWATER VALVES FIGURE P3007.5(2) MACERATING TOILET SYSTEMS FIGURE P3007.5(2) MACERATING TOILET SYSTEMS TABLE 3007.6 MINIMUM CAPACITY OF SEWAGE PUMP OR SEWAGE EJECTOR TABLE 3007.6 MINIMUM CAPACITY OF SEWAGE PUMP OR SEWAGE EJECTOR
1347	FIGURE P3008.1(1) BACKWATER VALVE LOCATION FIGURE P3008.1(1) BACKWATER VALVE LOCATION
1348	FIGURE P3008.1(2) BACKWATER VALVES FIGURE P3008.1(2) BACKWATER VALVES BIBLIOGRAPHY BIBLIOGRAPHY
1351	CHAPTER 31: VENTS CHAPTER 31: VENTS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION P3101 – VENT SYSTEMS SECTION P3101 – VENT SYSTEMS
1352	SECTION P3102 – VENT STACKS AND STACK VENTS SECTION P3102 – VENT STACKS AND STACK VENTS FIGURE P3102.2 AT LEAST ONE VENT TO THE OUTDOORS FIGURE P3102.2 AT LEAST ONE VENT TO THE OUTDOORS
1353	SECTION P3103 – VENT TERMINALS SECTION P3103 – VENT TERMINALS FIGURE P3103.1 VENT TERMINAL FIGURE P3103.1 VENT TERMINAL
1354	FIGURE P3103.5 VENT TERMINAL CLEARANCES FIGURE P3103.5 VENT TERMINAL CLEARANCES
1355	FIGURE P3103.6 VENT TERMINATION THROUGH EXTERIOR WALL FIGURE P3103.6 VENT TERMINATION THROUGH EXTERIOR WALL SECTION P3104 – VENT CONNECTIONS AND GRADES SECTION P3104 – VENT CONNECTIONS AND GRADES
1356	FIGURE P3104.2 GRADE OF VENTS FIGURE P3104.2 GRADE OF VENTS FIGURE P3104.3 VENT CONNECTIONS FIGURE P3104.3 VENT CONNECTIONS
1357	FIGURE P3104.4 PROHIBITED HORIZONTAL VENT PIPING FIGURE P3104.4 PROHIBITED HORIZONTAL VENT PIPING
1358	FIGURE P3104.5(1) IMPROPERLY CONNECTED VENT SERVING A DRAIN FIGURE P3104.5(1) IMPROPERLY CONNECTED VENT SERVING A DRAIN FIGURE P3104.5(2) HORIZONTAL OFFSET OF BRANCH VENT FIGURE P3104.5(2) HORIZONTAL OFFSET OF BRANCH VENT SECTION P3105 – FIXTURE VENTS SECTION P3105 – FIXTURE VENTS
1359	TABLE P3105.1 MAXIMUM DISTANCE OF FIXTURE TRAP FROM VENT TABLE P3105.1 MAXIMUM DISTANCE OF FIXTURE TRAP FROM VENT FIGURE P3105.1(1) TRAP TO VENT DISTANCE FOR WET VENT BRANCH FIGURE P3105.1(1) TRAP TO VENT DISTANCE FOR WET VENT BRANCH
1360	FIGURE P3105.1(2) TRAP TO VENT DISTANCE FOR WATER CLOSETS FIGURE P3105.1(2) TRAP TO VENT DISTANCE FOR WATER CLOSETS FIGURE P3105.2 MAXIMUM FALL OF FIXTURE DRAIN BETWEEN TRAP AND VENT FIGURE P3105.2 MAXIMUM FALL OF FIXTURE DRAIN BETWEEN TRAP AND VENT
1361	FIGURE P3105.3(1) CROWN VENTING FIGURE P3105.3(1) CROWN VENTING FIGURE P3105.3(2) CROWN VENTING FIGURE P3105.3(2) CROWN VENTING SECTION P3106 – INDIVIDUAL VENT SECTION P3106 – INDIVIDUAL VENT FIGURE P3106.1(1) INDIVIDUAL VENTS FIGURE P3106.1(1) INDIVIDUAL VENTS FIGURE P3106.1(2) IMPROPERLY INSTALLED INDIVIDUAL VENTS FIGURE P3106.1(2) IMPROPERLY INSTALLED INDIVIDUAL VENTS SECTION P3107 – COMMON VENT SECTION P3107 – COMMON VENT
1362	TABLE P3107.3 COMMON VENT SIZES TABLE P3107.3 COMMON VENT SIZES FIGURE P3107.2 COMMON VENTS WITH FIXTURE DRAINS CONNECTING AT SAME LEVEL FIGURE P3107.2 COMMON VENTS WITH FIXTURE DRAINS CONNECTING AT SAME LEVEL
1363	FIGURE P3107.3 COMMON VENTS WITH FIXTURE DRAINS CONNECTING AT DIFFERENT LEVELS FIGURE P3107.3 COMMON VENTS WITH FIXTURE DRAINS CONNECTING AT DIFFERENT LEVELS SECTION P3108 – WET VENTING SECTION P3108 – WET VENTING
1364	FIGURE 3108.1(1) ACCEPTABLE FIXTURE CONNECTIONS TO WET VENTS FIGURE 3108.1(1) ACCEPTABLE FIXTURE CONNECTIONS TO WET VENTS
1365	FIGURE P3108.1(2) PROHIBITED FIXTURE CONNECTIONS TO WET VENTS FIGURE P3108.1(2) PROHIBITED FIXTURE CONNECTIONS TO WET VENTS
1366	FIGURE P3108.2.1(1) HORIZONTAL WET VENT WITH INDIVIDUAL VENT FIGURE P3108.2.1(1) HORIZONTAL WET VENT WITH INDIVIDUAL VENT FIGURE P3108.1(2) DRY VENT FOR COMMON VENTED BATHTUBS SERVES AS DRY VENT FOR HORIZONTAL WET VENT FIGURE P3108.1(2) DRY VENT FOR COMMON VENTED BATHTUBS SERVES AS DRY VENT FOR HORIZONTAL WET VENT FIGURE P3108.2.1(3) PROHIBITED CONNECTION OF TWO FIXTURES UPSTREAM OF DRY-VENTED FIXTURE CONNECTION FIGURE P3108.2.1(3) PROHIBITED CONNECTION OF TWO FIXTURES UPSTREAM OF DRY-VENTED FIXTURE CONNECTION FIGURE P3108.2.1(4) PROHIBITED CONNECTION OF TWO FIXTURES UPSTREAM OF DRY-VENTED FIXTURE CONNECTION FIGURE P3108.2.1(4) PROHIBITED CONNECTION OF TWO FIXTURES UPSTREAM OF DRY-VENTED FIXTURE CONNECTION
1367	TABLE P3108.3 WET VENT SIZE TABLE P3108.3 WET VENT SIZE SECTION P3109 – WASTE STACK VENT SECTION P3109 – WASTE STACK VENT
1368	FIGURE P3109.2 WASTE STACK VENT SYSTEM FIGURE P3109.2 WASTE STACK VENT SYSTEM TABLE P3109.4 WASTE STACK VENT SIZE TABLE P3109.4 WASTE STACK VENT SIZE SECTION P3110 – CIRCUIT VENTING SECTION P3110 – CIRCUIT VENTING
1369	SECTION P3111 – COMBINATION WASTE AND VENT SYSTEM SECTION P3111 – COMBINATION WASTE AND VENT SYSTEM
1370	FIGURE P3111.2(1) COMBINATION DRAIN AND VENT FIGURE P3111.2(1) COMBINATION DRAIN AND VENT FIGURE P3111.2(2) COMBINATION DRAIN AND VENT FIGURE P3111.2(2) COMBINATION DRAIN AND VENT
1371	FIGURE P3111.2.2 COMBINATION DRAIN AND VENT FIGURE P3111.2.2 COMBINATION DRAIN AND VENT TABLE P3111.3 SIZE OF COMBINATION WASTE AND VENT PIPE TABLE P3111.3 SIZE OF COMBINATION WASTE AND VENT PIPE SECTION P3112 – ISLAND FIXTURE VENTING SECTION P3112 – ISLAND FIXTURE VENTING
1372	FIGURE P3112.2 ISLAND FIXTURE VENT FIGURE P3112.2 ISLAND FIXTURE VENT SECTION P3113 – VENT PIPE SIZING SECTION P3113 – VENT PIPE SIZING
1373	FIGURE P3113.2 DEVELOPED LENGTH OF VENTS FIGURE P3113.2 DEVELOPED LENGTH OF VENTS
1374	SECTION P3114 – AIR ADMITTANCE VALVES SECTION P3114 – AIR ADMITTANCE VALVES TABLE P3113.4.1 SIZE AND LENGTH OF SUMP VENTS TABLE P3113.4.1 SIZE AND LENGTH OF SUMP VENTS
1375	FIGURE P3114.3(1) AIR ADMITTANCE VALVES—INDIVIDUAL VENT FIGURE P3114.3(1) AIR ADMITTANCE VALVES—INDIVIDUAL VENT FIGURE P3114.3(2) COMMON VENT FIGURE P3114.3(2) COMMON VENT FIGURE P3114.3(3) WET VENT FIGURE P3114.3(3) WET VENT FIGURE P3114.3(4) CIRCUIT VENT FIGURE P3114.3(4) CIRCUIT VENT
1376	FIGURE P3114.3(5) VENT CONNECTION NOT PERMITTED FIGURE P3114.3(5) VENT CONNECTION NOT PERMITTED FIGURE P3114.4 DISTANCE ABOVE DRAIN FIGURE P3114.4 DISTANCE ABOVE DRAIN
1377	FIGURE P3114.8 PROHIBITED USE OF AIR ADMITTANCE VALVE FIGURE P3114.8 PROHIBITED USE OF AIR ADMITTANCE VALVE BIBLIOGRAPHY BIBLIOGRAPHY
1379	CHAPTER 32: TRAPS CHAPTER 32: TRAPS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION P3201 – FIXTURE TRAPS SECTION P3201 – FIXTURE TRAPS FIGURE P3201.1(1) SLIP JOINTS IN TRAPS FIGURE P3201.1(1) SLIP JOINTS IN TRAPS
1380	FIGURE P3201.1(2) TRAP REQUIREMENTS FIGURE P3201.1(2) TRAP REQUIREMENTS FIGURE P3201.2 TRAP SUBJECT TO EVAPORATION FIGURE P3201.2 TRAP SUBJECT TO EVAPORATION
1381	FIGURE P3201.3 INSTALLATION OF TRAP FIGURE P3201.3 INSTALLATION OF TRAP
1382	TABLE P3201.7 SIZE OF TRAPS AND TRAP ARMS FOR PLUMBING FIXTURES TABLE P3201.7 SIZE OF TRAPS AND TRAP ARMS FOR PLUMBING FIXTURES
1383	BIBLIOGRAPHY BIBLIOGRAPHY
1385	CHAPTER 33: STORM DRAINAGE CHAPTER 33: STORM DRAINAGE GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION P3301 – GENERAL SECTION P3301 – GENERAL SECTION P3302 – SUBSOIL DRAINS SECTION P3302 – SUBSOIL DRAINS SECTION P3303 – SUMPS AND PUMPING SYSTEMS SECTION P3303 – SUMPS AND PUMPING SYSTEMS
1386	FIGURE P3302.1 SUBSOIL DRAIN SUBJECT TO BACKFLOW FIGURE P3302.1 SUBSOIL DRAIN SUBJECT TO BACKFLOW
1387	TABLE P3302.1 SUBSOIL DRAIN PIPE TABLE P3302.1 SUBSOIL DRAIN PIPE
1389	PART VIII – ELECTRICAL PART VIII – ELECTRICAL CHAPTER 34: GENERAL REQUIREMENTS CHAPTER 34: GENERAL REQUIREMENTS GENERAL COMMENTS GENERAL COMMENTS
1390	PURPOSE PURPOSE SECTION E3401 – GENERAL SECTION E3401 – GENERAL
1391	SECTION E3402 – BUILDING STRUCTURE PROTECTION SECTION E3402 – BUILDING STRUCTURE PROTECTION
1392	SECTION E3403 – INSPECTION AND APPROVAL SECTION E3403 – INSPECTION AND APPROVAL SECTION E3404 – GENERAL EQUIPMENT REQUIREMENTS SECTION E3404 – GENERAL EQUIPMENT REQUIREMENTS
1394	TABLE E3404.4 ENCLOSURE SELECTION TABLE E3404.4 ENCLOSURE SELECTION
1396	SECTION E3405 – EQUIPMENT LOCATION AND CLEARANCES SECTION E3405 – EQUIPMENT LOCATION AND CLEARANCES
1397	FIGURE E3405.1 WORKING SPACE AND CLEARANCES FIGURE E3405.1 WORKING SPACE AND CLEARANCES
1399	SECTION E3406 – ELECTRICAL CONDUCTORS AND CONNECTIONS SECTION E3406 – ELECTRICAL CONDUCTORS AND CONNECTIONS
1402	FIGURE E3406.10.2 MULTIWIRE BRANCH CIRCUITS WITH SHARED NEUTRAL FIGURE E3406.10.2 MULTIWIRE BRANCH CIRCUITS WITH SHARED NEUTRAL
1403	FIGURE E3406.10.3 MEASURING CONDUCTOR LENGTH AT OUTLET BOX FIGURE E3406.10.3 MEASURING CONDUCTOR LENGTH AT OUTLET BOX
1404	SECTION E3407 – CONDUCTOR AND TERMINAL IDENTIFICATION SECTION E3407 – CONDUCTOR AND TERMINAL IDENTIFICATION
1406	BIBLIOGRAPHY BIBLIOGRAPHY
1407	CHAPTER 35: ELECTRICAL DEFINITIONS CHAPTER 35: ELECTRICAL DEFINITIONS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION E3501 – GENERAL SECTION E3501 – GENERAL
1412	FIGURE E3501(1) CONDUCTOR TERMINOLOGY FIGURE E3501(1) CONDUCTOR TERMINOLOGY
1423	FIGURE E3401(2) POWER SUPPLY VOLTAGES FIGURE E3401(2) POWER SUPPLY VOLTAGES BIBLIOGRAPHY BIBLIOGRAPHY
1425	CHAPTER 36: SERVICES CHAPTER 36: SERVICES GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION E3601 – GENERAL SERVICES SECTION E3601 – GENERAL SERVICES
1426	FIGURE E3601.3 ONE BUILDING NOT TO BE SUPPLIED THROUGH ANOTHER FIGURE E3601.3 ONE BUILDING NOT TO BE SUPPLIED THROUGH ANOTHER
1428	FIGURE E3601.6.2(1) METER AND MAIN DISCONNECT ON OUTSIDE OF HOUSE FIGURE E3601.6.2(1) METER AND MAIN DISCONNECT ON OUTSIDE OF HOUSE FIGURE E3601.6.2(2) METER ON OUTSIDE OF HOUSE; MAIN DISCONNECT ON INSIDE OF HOUSE FIGURE E3601.6.2(2) METER ON OUTSIDE OF HOUSE; MAIN DISCONNECT ON INSIDE OF HOUSE
1429	FIGURE E3601.7 SERVICE DISCONNECTING MEANS CONSISTING OF SIX OR FEWER SWITCHES OR CIRCUIT BREAKERS FIGURE E3601.7 SERVICE DISCONNECTING MEANS CONSISTING OF SIX OR FEWER SWITCHES OR CIRCUIT BREAKERS SECTION E3602 – SERVICE SIZE AND RATING SECTION E3602 – SERVICE SIZE AND RATING
1430	TABLE E3602.2 MINIMUM SERVICE LOAD CALCULATION TABLE E3602.2 MINIMUM SERVICE LOAD CALCULATION
1433	SECTION E3603 – SERVICE, FEEDER AND GROUNDING ELECTRODE CONDUCTOR SIZING SECTION E3603 – SERVICE, FEEDER AND GROUNDING ELECTRODE CONDUCTOR SIZING
1434	TABLE E3603.1 SERVICE CONDUCTOR AND GROUNDING ELECTRODE CONDUCTOR SIZING TABLE E3603.1 SERVICE CONDUCTOR AND GROUNDING ELECTRODE CONDUCTOR SIZING
1436	FIGURE E3603.3.3 SERVICE OVERCURRENT DEVICE INTEGRAL WITH SERVICE DISCONNECTING FIGURE E3603.3.3 SERVICE OVERCURRENT DEVICE INTEGRAL WITH SERVICE DISCONNECTING SECTION E3604 – OVERHEAD SERVICE-DROP AND SERVICE CONDUCTOR INSTALLATION SECTION E3604 – OVERHEAD SERVICE-DROP AND SERVICE CONDUCTOR INSTALLATION
1437	FIGURE E3604.1 CLEARANCES FROM BUILDING OPENINGS FIGURE E3604.1 CLEARANCES FROM BUILDING OPENINGS
1438	FIGURE E3604.1 CLEARANCES FROM BUILDING OPENINGS FIGURE E3604.1 CLEARANCES FROM BUILDING OPENINGS FIGURE E3604.2.1 CLEARANCES FROM ROOFS FIGURE E3604.2.1 CLEARANCES FROM ROOFS
1439	SECTION E3605 – SERVICE-ENTRANCE CONDUCTORS SECTION E3605 – SERVICE-ENTRANCE CONDUCTORS
1440	SECTION E3606 – SERVICE EQUIPMENT—GENERAL SECTION E3606 – SERVICE EQUIPMENT—GENERAL
1441	SECTION E3607 – SYSTEM GROUNDING SECTION E3607 – SYSTEM GROUNDING
1442	FIGURE E3607.2 SERVICE EQUIPMENT AND EQUIPMENT ON THE LOAD SIDE OF THE DISCONNECTING MEANS FIGURE E3607.2 SERVICE EQUIPMENT AND EQUIPMENT ON THE LOAD SIDE OF THE DISCONNECTING MEANS
1443	FIGURE E3607.3.1 TWO BUILDINGS SUPPLIED FROM A COMMON SERVICE FIGURE E3607.3.1 TWO BUILDINGS SUPPLIED FROM A COMMON SERVICE
1444	FIGURE E3607.3.2 TWO BUILDINGS SUPPLIED FROM A COMMON SERVICE FIGURE E3607.3.2 TWO BUILDINGS SUPPLIED FROM A COMMON SERVICE
1445	SECTION E3608 – GROUNDING ELECTRODE SYSTEM SECTION E3608 – GROUNDING ELECTRODE SYSTEM
1446	FIGURE E3608.1 GROUNDING ELECTRODE SYSTEM FIGURE E3608.1 GROUNDING ELECTRODE SYSTEM
1449	FIGURE E3608.4(1) FALL OF POTENTIAL EARTH RESISTANCE TEST SETUP FIGURE E3608.4(1) FALL OF POTENTIAL EARTH RESISTANCE TEST SETUP
1450	FIGURE E3608.4(2) TYPICAL GRAPH FOR FALL-OF-POTENTIAL EARTH RESISTANCE TEST FIGURE E3608.4(2) TYPICAL GRAPH FOR FALL-OF-POTENTIAL EARTH RESISTANCE TEST SECTION E3609 – BONDING SECTION E3609 – BONDING
1453	SECTION E3610 – GROUNDING ELECTRODE CONDUCTORS SECTION E3610 – GROUNDING ELECTRODE CONDUCTORS
1454	SECTION E3611 – GROUNDING ELECTRODE CONDUCTOR CONNECTION TO THE GROUNDING ELECTRODES SECTION E3611 – GROUNDING ELECTRODE CONDUCTOR CONNECTION TO THE GROUNDING ELECTRODES BIBLIOGRAPHY BIBLIOGRAPHY
1455	CHAPTER 37: BRANCH CIRCUIT AND FEEDER REQUIREMENTS CHAPTER 37: BRANCH CIRCUIT AND FEEDER REQUIREMENTS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION E3701 – GENERAL SECTION E3701 – GENERAL
1457	SECTION E3702 – BRANCH CIRCUIT RATINGS SECTION E3702 – BRANCH CIRCUIT RATINGS
1460	TABLE E3702.13 BRANCH-CIRCUIT REQUIREMENTS—SUMMARY TABLE E3702.13 BRANCH-CIRCUIT REQUIREMENTS—SUMMARY SECTION E3703 – REQUIRED BRANCH CIRCUITS SECTION E3703 – REQUIRED BRANCH CIRCUITS
1464	SECTION E3704 – FEEDER REQUIREMENTS SECTION E3704 – FEEDER REQUIREMENTS
1465	TABLE E3704.2(1) FEEDER LOAD CALCULATION TABLE E3704.2(1) FEEDER LOAD CALCULATION
1466	TABLE E3704.2(2) DEMAND LOADS FOR ELECTRIC RANGES, WALL-MOUNTED OVENS, COUNTER-MOUNTED COOKING UNITS AND OTHER COOKING APPLIANCES OVER 13/4 kVA RATINGa TABLE E3704.2(2) DEMAND LOADS FOR ELECTRIC RANGES, WALL-MOUNTED OVENS, COUNTER-MOUNTED COOKING UNITS AND OTHER COOKING APPLIANCES OVER 13/4 kVA RATINGa
1467	SECTION E3705 – CONDUCTOR SIZING AND OVERCURRENT PROTECTION SECTION E3705 – CONDUCTOR SIZING AND OVERCURRENT PROTECTION
1468	TABLE E3705.1 ALLOWABLE AMPACITIES TABLE E3705.1 ALLOWABLE AMPACITIES
1469	TABLE E3705.2 AMBIENT TEMPERATURE CORRECTION FACTORS TABLE E3705.2 AMBIENT TEMPERATURE CORRECTION FACTORS
1470	FIGURE E3705.3 MULTICONDUCTOR CABLES BUNDLED TOGETHER FIGURE E3705.3 MULTICONDUCTOR CABLES BUNDLED TOGETHER
1471	TABLE E3705.3 CONDUCTOR PROXIMITY ADJUSTMENT FACTORS TABLE E3705.3 CONDUCTOR PROXIMITY ADJUSTMENT FACTORS
1473	TABLE E3705.5.3 OVERCURRENT-PROTECTION RATING TABLE E3705.5.3 OVERCURRENT-PROTECTION RATING SECTION E3706 – PANELBOARDS SECTION E3706 – PANELBOARDS
1474	FIGURE E3706.2 PANELBOARD CIRCUIT IDENTIFICATION FIGURE E3706.2 PANELBOARD CIRCUIT IDENTIFICATION
1475	BIBLIOGRAPHY BIBLIOGRAPHY
1477	CHAPTER 38: WIRING METHODS CHAPTER 38: WIRING METHODS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION E3801 – GENERAL REQUIREMENTS SECTION E3801 – GENERAL REQUIREMENTS TABLE E3801.2 ALLOWABLE WIRING METHODS TABLE E3801.2 ALLOWABLE WIRING METHODS
1478	TABLE E3801.4 ALLOWABLE APPLICATIONS FOR WIRING METHODS TABLE E3801.4 ALLOWABLE APPLICATIONS FOR WIRING METHODS
1479	SECTION E3802 – ABOVE-GROUND INSTALLATION REQUIREMENTS SECTION E3802 – ABOVE-GROUND INSTALLATION REQUIREMENTS
1480	TABLE E3802.1 GENERAL INSTALLATION AND SUPPORT REQUIREMENTS FOR WIRING METHODS TABLE E3802.1 GENERAL INSTALLATION AND SUPPORT REQUIREMENTS FOR WIRING METHODS
1481	FIGURE E3802.1 CABLES HELD 1 1/4 INCHES BACK FROM EDGE OF FRAMING MEMBER FIGURE E3802.1 CABLES HELD 1 1/4 INCHES BACK FROM EDGE OF FRAMING MEMBER
1482	FIGURE E3802.3.1(1) PROHIBITED APPLICATION OF TYPE NM CABLE FIGURE E3802.3.1(1) PROHIBITED APPLICATION OF TYPE NM CABLE
1483	FIGURE E3802.3.1(2) PROHIBITED APPLICATION OF TYPE NM CABLE FIGURE E3802.3.1(2) PROHIBITED APPLICATION OF TYPE NM CABLE FIGURE E3802.4 PROHIBITED INSTALLATION OF TYPE MM CABLE ACROSS THE BOTTOM OF FLOOR JOISTS FIGURE E3802.4 PROHIBITED INSTALLATION OF TYPE MM CABLE ACROSS THE BOTTOM OF FLOOR JOISTS
1484	SECTION E3803 – UNDERGROUND INSTALLATION REQUIREMENTS SECTION E3803 – UNDERGROUND INSTALLATION REQUIREMENTS
1485	TABLE E3803.1 MINIMUM COVER REQUIREMENTS, BURIAL IN INCHES TABLE E3803.1 MINIMUM COVER REQUIREMENTS, BURIAL IN INCHES
1486	BIBLIOGRAPHY BIBLIOGRAPHY
1487	CHAPTER 39: POWER AND LIGHTING DISTRIBUTION CHAPTER 39: POWER AND LIGHTING DISTRIBUTION GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION E3901 – RECEPTACLE OUTLETS SECTION E3901 – RECEPTACLE OUTLETS
1488	FIGURE E3901.2 GENERAL USE RECEPTACLE DISTRIBUTION FIGURE E3901.2 GENERAL USE RECEPTACLE DISTRIBUTION
1489	FIGURE E3901.4 COUNTERTOP RECEPTACLES FIGURE E3901.4 COUNTERTOP RECEPTACLES
1490	FIGURE E3901.4.1 DETERMINATION OF AREA BEHIND SINK OR RANGE FIGURE E3901.4.1 DETERMINATION OF AREA BEHIND SINK OR RANGE
1491	FIGURE E3901.4.2 ISLAND WITH TWO COUNTER SPACES FIGURE E3901.4.2 ISLAND WITH TWO COUNTER SPACES
1493	SECTION E3902 – GROUND-FAULT AND ARC-FAULT CIRCUIT-INTERRUPTER PROTECTION SECTION E3902 – GROUND-FAULT AND ARC-FAULT CIRCUIT-INTERRUPTER PROTECTION FIGURE E3902.1 BASIC PRINCIPLES OF OPERATION OF GFCI RECEPTACLE DEVICE AND DEVICE TESTER FIGURE E3902.1 BASIC PRINCIPLES OF OPERATION OF GFCI RECEPTACLE DEVICE AND DEVICE TESTER
1495	FIGURE E3902.12 AFCI TYPE CIRCUIT BREAKER FIGURE E3902.12 AFCI TYPE CIRCUIT BREAKER
1496	SECTION E3903 – LIGHTING OUTLETS SECTION E3903 – LIGHTING OUTLETS SECTION E3904 – GENERAL INSTALLATION REQUIREMENTS SECTION E3904 – GENERAL INSTALLATION REQUIREMENTS
1498	TABLE E3904.6(1) MAXIMUM NUMBER OF CONDUCTORS IN ELECTRICAL METALLIC TUBING (EMT) TABLE E3904.6(1) MAXIMUM NUMBER OF CONDUCTORS IN ELECTRICAL METALLIC TUBING (EMT)
1499	TABLE E3904.6(2) MAXIMUM NUMBER OF CONDUCTORS IN ELECTRICAL NONMETALLIC TUBING (ENT)a TABLE E3904.6(2) MAXIMUM NUMBER OF CONDUCTORS IN ELECTRICAL NONMETALLIC TUBING (ENT)a
1500	TABLE E3904.6(3) MAXIMUM NUMBER OF CONDUCTORS IN FLEXIBLE METALLIC CONDUIT (FMC)a TABLE E3904.6(3) MAXIMUM NUMBER OF CONDUCTORS IN FLEXIBLE METALLIC CONDUIT (FMC)a
1501	TABLE E3904.6(4) MAXIMUM NUMBER OF CONDUCTORS IN INTERMEDIATE METALLIC CONDUIT (IMC)a TABLE E3904.6(4) MAXIMUM NUMBER OF CONDUCTORS IN INTERMEDIATE METALLIC CONDUIT (IMC)a
1502	TABLE E3904.6(5) MAXIMUM NUMBER OF CONDUCTORS IN LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT (FNMC-B)a TABLE E3904.6(5) MAXIMUM NUMBER OF CONDUCTORS IN LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT (FNMC-B)a
1503	TABLE E3904.6(6) MAXIMUM NUMBER OF CONDUCTORS IN LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT (FNMC-A)a TABLE E3904.6(6) MAXIMUM NUMBER OF CONDUCTORS IN LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT (FNMC-A)a
1504	TABLE E3904.6(7) MAXIMUM NUMBER OF CONDUCTORS IN LIQUID-TIGHT FLEXIBLE METAL CONDUIT (LFMC)a TABLE E3904.6(7) MAXIMUM NUMBER OF CONDUCTORS IN LIQUID-TIGHT FLEXIBLE METAL CONDUIT (LFMC)a
1505	TABLE E3904.6(8) MAXIMUM NUMBER OF CONDUCTORS IN RIGID METAL CONDUIT (RMC)a TABLE E3904.6(8) MAXIMUM NUMBER OF CONDUCTORS IN RIGID METAL CONDUIT (RMC)a
1506	TABLE E3904.6(9) MAXIMUM NUMBER OF CONDUCTORS IN RIGID PVC CONDUIT, SCHEDULE 80 (PVC-80)a TABLE E3904.6(9) MAXIMUM NUMBER OF CONDUCTORS IN RIGID PVC CONDUIT, SCHEDULE 80 (PVC-80)a
1507	TABLE E3904.6(10) MAXIMUM NUMBER OF CONDUCTORS IN RIGID PVC CONDUIT SCHEDULE 40 (PVC-40)a TABLE E3904.6(10) MAXIMUM NUMBER OF CONDUCTORS IN RIGID PVC CONDUIT SCHEDULE 40 (PVC-40)a
1508	SECTION E3905 – BOXES, CONDUIT BODIES AND FITTINGS SECTION E3905 – BOXES, CONDUIT BODIES AND FITTINGS
1513	TABLE E3905.13.1 MAXIMUM NUMBER OF CONDUCTORS IN METAL BOXE TABLE E3905.13.1 MAXIMUM NUMBER OF CONDUCTORS IN METAL BOXE
1514	TABLE E3905.13.2.1 VOLUME ALLOWANCE REQUIRED PER CONDUCTOR TABLE E3905.13.2.1 VOLUME ALLOWANCE REQUIRED PER CONDUCTOR SECTION E3906 – INSTALLATION OF BOXES, CONDUIT BODIES AND FITTINGS SECTION E3906 – INSTALLATION OF BOXES, CONDUIT BODIES AND FITTINGS
1517	SECTION E3907 – CABINETS AND PANELBOARDS SECTION E3907 – CABINETS AND PANELBOARDS
1519	TABLE E3907.8 PERCENT OF CROSS SECTION OF CONDUIT AND TUBING FOR CONDUCTORS TABLE E3907.8 PERCENT OF CROSS SECTION OF CONDUIT AND TUBING FOR CONDUCTORS FIGURE E3907.8 CABLES SECURED TO PANELBOARD ENCLOSURES FIGURE E3907.8 CABLES SECURED TO PANELBOARD ENCLOSURES SECTION E3908 – GROUNDING SECTION E3908 – GROUNDING
1521	FIGURE E3908.7 PROHIBITED USE OF GROUNDED CIRCUIT CONDUCTOR FIGURE E3908.7 PROHIBITED USE OF GROUNDED CIRCUIT CONDUCTOR
1523	TABLE E3908.12 EQUIPMENT GROUNDING CONDUCTOR SIZING TABLE E3908.12 EQUIPMENT GROUNDING CONDUCTOR SIZING
1524	SECTION E3909 – FLEXIBLE CORDS SECTION E3909 – FLEXIBLE CORDS
1525	TABLE E3909.2 MAXIMUM AMPERE LOAD FOR FLEXIBLE CORDS TABLE E3909.2 MAXIMUM AMPERE LOAD FOR FLEXIBLE CORDS BIBLIOGRAPHY BIBLIOGRAPHY
1527	CHAPTER 40: DEVICES AND LUMINAIRES CHAPTER 40: DEVICES AND LUMINAIRES GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION E4001 – SWITCHES SECTION E4001 – SWITCHES
1529	SECTION E4002 – RECEPTACLES SECTION E4002 – RECEPTACLES
1530	TABLE E4002.1.2 RECEPTACLE RATINGS FOR VARIOUS SIZE MULTI-OUTLET CIRCUITS TABLE E4002.1.2 RECEPTACLE RATINGS FOR VARIOUS SIZE MULTI-OUTLET CIRCUITS
1532	FIGURE E4002.14 TYPICAL TAMPER-RESISTANT RECEPTACLE FIGURE E4002.14 TYPICAL TAMPER-RESISTANT RECEPTACLE SECTION E4003 – FIXTURES SECTION E4003 – FIXTURES
1534	FIGURE E4003.12 CLOSET STORAGE SPACE FIGURE E4003.12 CLOSET STORAGE SPACE
1535	SECTION E4004 – LUMINAIRE INSTALLATION SECTION E4004 – LUMINAIRE INSTALLATION
1536	SECTION E4005 – TRACK LIGHTING SECTION E4005 – TRACK LIGHTING
1537	BIBLIOGRAPHY BIBLIOGRAPHY
1539	CHAPTER 41: APPLIANCE INSTALLATION CHAPTER 41: APPLIANCE INSTALLATION GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION E4101 – GENERAL SECTION E4101 – GENERAL TABLE E4101.3 FLEXIBLE CORD LENGTH TABLE E4101.3 FLEXIBLE CORD LENGTH
1540	FIGURE E4101.5 TYPICAL APPLIANCE DISCONNECTING MEANS FIGURE E4101.5 TYPICAL APPLIANCE DISCONNECTING MEANS
1541	TABLE E4101.5 DISCONNECTING MEANS TABLE E4101.5 DISCONNECTING MEANS
1542	BIBLIOGRAPHY BIBLIOGRAPHY
1543	CHAPTER 42: SWIMMING POOLS CHAPTER 42: SWIMMING POOLS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION E4201 – GENERAL SECTION E4201 – GENERAL
1545	SECTION E4202 – WIRING METHODS FOR POOLS, SPAS, HOT TUBS AND HYDROMASSAGE BATHTUBS SECTION E4202 – WIRING METHODS FOR POOLS, SPAS, HOT TUBS AND HYDROMASSAGE BATHTUBS TABLE E4202.1 ALLOWABLE APPLICATIONS FOR WIRING METHODS TABLE E4202.1 ALLOWABLE APPLICATIONS FOR WIRING METHODS
1546	SECTION E4203 – EQUIPMENT LOCATION AND CLEARANCES SECTION E4203 – EQUIPMENT LOCATION AND CLEARANCES
1549	TABLE E4203.5 OVERHEAD CONDUCTOR CLEARANCES TABLE E4203.5 OVERHEAD CONDUCTOR CLEARANCES SECTION E4204 – BONDING SECTION E4204 – BONDING
1550	TABLE E4203.7 MINIMUM BURIAL DEPTHS TABLE E4203.7 MINIMUM BURIAL DEPTHS
1552	SECTION E4205 – GROUNDING SECTION E4205 – GROUNDING
1554	SECTION E4206 – EQUIPMENT INSTALLATION SECTION E4206 – EQUIPMENT INSTALLATION
1557	SECTION E4207 – STORABLE SWIMMING POOLS SECTION E4207 – STORABLE SWIMMING POOLS
1558	SECTION E4208 – SPAS AND HOT TUBS SECTION E4208 – SPAS AND HOT TUBS
1559	SECTION E4209 – HYDROMASSAGE BATHTUBS SECTION E4209 – HYDROMASSAGE BATHTUBS BIBLIOGRAPHY BIBLIOGRAPHY
1561	CHAPTER 43: CLASS 2 REMOTE-CONTROL, SIGNALING AND POWER-LIMITED CIRCUITS CHAPTER 43: CLASS 2 REMOTE-CONTROL, SIGNALING AND POWER-LIMITED CIRCUITS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION E4301 – GENERAL SECTION E4301 – GENERAL SECTION E4302 – POWER SOURCES SECTION E4302 – POWER SOURCES
1562	SECTION E4303 – WIRING METHODS SECTION E4303 – WIRING METHODS TABLE E4303.2 CABLE USES AND PERMITTED SUBSTITUTI TABLE E4303.2 CABLE USES AND PERMITTED SUBSTITUTI
1563	SECTION E4304 – INSTALLATION REQUIREMENTS SECTION E4304 – INSTALLATION REQUIREMENTS
1564	BIBLIOGRAPHY BIBLIOGRAPHY
1565	PART IX – REFERENCED STANDARDS PART IX – REFERENCED STANDARDS CHAPTER 44: REFERENCED STANDARDS CHAPTER 44: REFERENCED STANDARDS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE
1566	FIGURE 44 REFERENCE STANDARDS FIGURE 44 REFERENCE STANDARDS
1567	AAMA AAMA ACI ACI ACCA ACCA AFPA AFPA AISI AISI
1568	AITC AITC ANSI ANSI
1569	APA APA APSP APSP ASCE/SEI ASCE/SEI
1570	ASHRAE ASHRAE ASME ASME
1571	ASSE ASSE
1572	ASTM ASTM
1579	AWPA AWPA AWS AWS
1580	AWWA AWWA CGSB CGSB CISPI CISPI CPA CPA CPSC CPSC
1581	CSA CSA
1582	CSSB CSSB DASMA DASMA DOC DOC DOTn DOTn FEMA FEMA
1583	FM FM GA GA HPVA HPVA ICC ICC ISO ISO
1584	MSS MSS NAIMA NAIMA NCMA NCMA NFPA NFPA NFRC NFRC
1585	NSF NSF PCA PCA SMACNA SMACNA TMS TMS TPI TPI
1586	UL UL
1587	ULC ULC US-FTC US-FTC WDMA WDMA
1589	APPENDIX A – SIZING AND CAPACITIES OF GAS PIPING APPENDIX A – SIZING AND CAPACITIES OF GAS PIPING A.1 GENERAL PIPING CONSIDERATIONS A.1 GENERAL PIPING CONSIDERATIONS A.2 DESCRIPTION OF TABLES A.2 DESCRIPTION OF TABLES
1590	TABLE A.2.2 EQUIVALENT LENGTHS OF PIPE FITTINGS AND VALVES TABLE A.2.2 EQUIVALENT LENGTHS OF PIPE FITTINGS AND VALVES
1591	TABLE A.2.2—continued EQUIVALENT LENGTHS OF PIPE FITTINGS AND VALVES TABLE A.2.2—continued EQUIVALENT LENGTHS OF PIPE FITTINGS AND VALVES
1592	TABLE A.2.4 MULTIPLIERS TO BE USED WITH TABLES G2413.4(1)THROUGH G2413.4(8) WHERE THE SPECIFIC GRAVITYOF THE GAS IS OTHER THAN 0.60 TABLE A.2.4 MULTIPLIERS TO BE USED WITH TABLES G2413.4(1)THROUGH G2413.4(8) WHERE THE SPECIFIC GRAVITYOF THE GAS IS OTHER THAN 0.60 A.3 USE OF CAPACITY TABLES A.3 USE OF CAPACITY TABLES
1594	TABLE A.3.4 THOUSANDS OF Btu/h (MBH) OF NATURAL GAS PER 100 FEET OF PIPE AT VARIOUS PRESSURE DROPS AND PIPE DIAMETERS TABLE A.3.4 THOUSANDS OF Btu/h (MBH) OF NATURAL GAS PER 100 FEET OF PIPE AT VARIOUS PRESSURE DROPS AND PIPE DIAMETERS A.4 USE OF SIZING EQUATIONS A.4 USE OF SIZING EQUATIONS A.5 PIPE AND TUBE DIAMETERS A.5 PIPE AND TUBE DIAMETERS
1595	TABLE A.5.1 SCHEDULE 40 STEEL PIPE STANDARD SIZES TABLE A.5.1 SCHEDULE 40 STEEL PIPE STANDARD SIZES TABLE A.5.2 COPPER TUBE STANDARD SIZES TABLE A.5.2 COPPER TUBE STANDARD SIZES A.6 USE OF SIZING CHARTS A.6 USE OF SIZING CHARTS
1596	FIGURE A.6(a) CAPACITY OF NATURAL GAS PIPING, LOW PRESSURE (0.60 WC) FIGURE A.6(a) CAPACITY OF NATURAL GAS PIPING, LOW PRESSURE (0.60 WC) FIGURE A.6 (b) CAPACITY OF NATURAL GAS PIPING, HIGH PRESSURE (1.5 psi and above) FIGURE A.6 (b) CAPACITY OF NATURAL GAS PIPING, HIGH PRESSURE (1.5 psi and above)
1597	A.7 EXAMPLES OF PIPING SYSTEM DESIGN AND SIZING A.7 EXAMPLES OF PIPING SYSTEM DESIGN AND SIZING FIGURE A.7.1 PIPING PLAN SHOWING A STEEL PIPING SYSTEM FIGURE A.7.1 PIPING PLAN SHOWING A STEEL PIPING SYSTEM FIGURE A.7.2 PIPING PLAN SHOWING A CSST SYSTEM FIGURE A.7.2 PIPING PLAN SHOWING A CSST SYSTEM
1598	FIGURE A.7.3 PIPING PLAN SHOWING A COPPER TUBING SYSTEM FIGURE A.7.3 PIPING PLAN SHOWING A COPPER TUBING SYSTEM
1599	FIGURE A.7.4 PIPING PLAN SHOWING A MODIFICATION TO EXISTING PIPING SYST FIGURE A.7.4 PIPING PLAN SHOWING A MODIFICATION TO EXISTING PIPING SYST
1601	APPENDIX B – SIZING OF VENTING SYSTEMS SERVING APPLIANCES EQUIPPED WITH DRAFT HOODS, CATEGORY I APPLIANCES, AND APPLIANCES LISTED FOR USE WITH TYPE B VENTS APPENDIX B – SIZING OF VENTING SYSTEMS SERVING APPLIANCES EQUIPPED WITH DRAFT HOODS, CATEGORY I APPLIANCES, AND APPLIANCES LISTED FOR USE WITH TYPE B VENTS EXAMPLES USING SINGLE APPLIANCE VENTING TABLES EXAMPLES USING SINGLE APPLIANCE VENTING TABLES FIGURE B-1 TYPE B DOUBLE-WALL VENT SYSTEM SERVING A SINGLE APPLIANCE WITH A TYPE B DOUBLE-WALL VENT FIGURE B-1 TYPE B DOUBLE-WALL VENT SYSTEM SERVING A SINGLE APPLIANCE WITH A TYPE B DOUBLE-WALL VENT FIGURE B-2 TYPE B DOUBLE-WALL VENT SYSTEM SERVING A SINGLE APPLIANCE WITH A SINGLE-WALL METAL VENT CONNECTOR FIGURE B-2 TYPE B DOUBLE-WALL VENT SYSTEM SERVING A SINGLE APPLIANCE WITH A SINGLE-WALL METAL VENT CONNECTOR
1602	FIGURE B-3 VENT SYSTEM SERVING A SINGLE APPLIANCE WITH A MASONRY CHIMNEY OF TYPE BDOUBLE-WALL VENT CONNECTOR FIGURE B-3 VENT SYSTEM SERVING A SINGLE APPLIANCE WITH A MASONRY CHIMNEY OF TYPE BDOUBLE-WALL VENT CONNECTOR FIGURE B-4 VENT SYSTEM SERVING A SINGLE APPLIANCE USING A MASONRY CHIMNEY AND A SINGLE-WALL METAL VENT CONNECTOR FIGURE B-4 VENT SYSTEM SERVING A SINGLE APPLIANCE USING A MASONRY CHIMNEY AND A SINGLE-WALL METAL VENT CONNECTOR FIGURE B-5 ASBESTOS CEMENT TYPE B OR SINGLE-WALL METAL VENT SYSTEM SERVING A SINGLE DRAFT-HOOD-EQUIPPED APPLIANCE FIGURE B-5 ASBESTOS CEMENT TYPE B OR SINGLE-WALL METAL VENT SYSTEM SERVING A SINGLE DRAFT-HOOD-EQUIPPED APPLIANCE FIGURE B-6 VENT SYSTEM SERVING TWO OR MORE APPLIANCES WITH TYPE B DOUBLE-WALL VENT AND TYPE B DOUBLE-WALL VENT CONNECTOR FIGURE B-6 VENT SYSTEM SERVING TWO OR MORE APPLIANCES WITH TYPE B DOUBLE-WALL VENT AND TYPE B DOUBLE-WALL VENT CONNECTOR
1603	FIGURE B-7 VENT SYSTEM SERVING TWO OR MORE APPLIANCES WITH TYPE B DOUBLE-WALL VENT AND SINGLE-WALL METAL VENT CONNECTORS FIGURE B-7 VENT SYSTEM SERVING TWO OR MORE APPLIANCES WITH TYPE B DOUBLE-WALL VENT AND SINGLE-WALL METAL VENT CONNECTORS FIGURE B-8 MASONRY CHIMNEY SERVING TWO OR MORE APPLIANCES WITH TYPE B DOUBLE-WALL VENT CONNECTOR FIGURE B-8 MASONRY CHIMNEY SERVING TWO OR MORE APPLIANCES WITH TYPE B DOUBLE-WALL VENT CONNECTOR FIGURE B-9 MASONRY CHIMNEY SERVING TWO OR MORE APPLIANCES WITH SINGLE-WALL METAL VENT CONNECTORS FIGURE B-9 MASONRY CHIMNEY SERVING TWO OR MORE APPLIANCES WITH SINGLE-WALL METAL VENT CONNECTORS FIGURE B-10 ASBESTOS CEMENT TYPE B OR SINGLE-WALL METAL VENT SYSTEM SERVING TWO OR MORE DRAFT-HOOD-EQUIPPED APPLIANCES FIGURE B-10 ASBESTOS CEMENT TYPE B OR SINGLE-WALL METAL VENT SYSTEM SERVING TWO OR MORE DRAFT-HOOD-EQUIPPED APPLIANCES
1604	FIGURE B-11 USE OF MANIFOLD COMMON VENT CONNECTOR FIGURE B-11 USE OF MANIFOLD COMMON VENT CONNECTOR FIGURE B-12 USE OF OFFSET COMMON VENT FIGURE B-12 USE OF OFFSET COMMON VENT FIGURE B-13 MULTISTORY GAS VENT DESIGN PROCEDURE FOR EACH SEGMENT OF SYSTEM FIGURE B-13 MULTISTORY GAS VENT DESIGN PROCEDURE FOR EACH SEGMENT OF SYSTEM FIGURE B-14 MULTISTORY VENT SYSTEMS FIGURE B-14 MULTISTORY VENT SYSTEMS
1605	FIGURE B-15 (EXAMPLE 1) SINGLE DRAFT-HOOD-EQUIPPED APPLIANCE FIGURE B-15 (EXAMPLE 1) SINGLE DRAFT-HOOD-EQUIPPED APPLIANCE FIGURE B-16 (EXAMPLE 2) SINGLE FAN-ASSISTED APPLIANCE FIGURE B-16 (EXAMPLE 2) SINGLE FAN-ASSISTED APPLIANCE
1606	EXAMPLES USING COMMON VENTING TABLES EXAMPLES USING COMMON VENTING TABLES FIGURE B-17 (EXAMPLE 4) COMMON VENTING TWO DRAFTHOOD-EQUIPPED APPLIANCES FIGURE B-17 (EXAMPLE 4) COMMON VENTING TWO DRAFTHOOD-EQUIPPED APPLIANCES FIGURE B-18 (EXAMPLE 5A) COMMON VENTING A DRAFT HOOD WITH A FAN-ASSISTED FURNACE INTO A TYPE B DOUBLE-WALL COMMON VENT FIGURE B-18 (EXAMPLE 5A) COMMON VENTING A DRAFT HOOD WITH A FAN-ASSISTED FURNACE INTO A TYPE B DOUBLE-WALL COMMON VENT
1608	TABLE B-1 MASONRY CHIMNEY LINER DIMENSIONS WITH CIRCULAR EQUIVALENTSa TABLE B-1 MASONRY CHIMNEY LINER DIMENSIONS WITH CIRCULAR EQUIVALENTSa
1609	FIGURE B-19 FIGURE B-19
1611	APPENDIX C – EXIT TERMINALS OF MECHANICAL DRAFT AND DIRECT-VENT VENTING SYSTEMS APPENDIX C – EXIT TERMINALS OF MECHANICAL DRAFT AND DIRECT-VENT VENTING SYSTEMS FIGURE C-1 EXIT TERMINALS OF MECHANICAL DRAFT AND DIRECT-VENT VENTING SYSTEMS FIGURE C-1 EXIT TERMINALS OF MECHANICAL DRAFT AND DIRECT-VENT VENTING SYSTEMS
1613	APPENDIX D – RECOMMENDED PROCEDURE FOR SAFETY INSPECTION OF AN EXISTING APPLIANCE INSTALLATION APPENDIX D – RECOMMENDED PROCEDURE FOR SAFETY INSPECTION OF AN EXISTING APPLIANCE INSTALLATION
1615	APPENDIX E – MANUFACTURED HOUSING USED AS DWELLINGS APPENDIX E – MANUFACTURED HOUSING USED AS DWELLINGS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION AE101 – SCOPE SECTION AE101 – SCOPE
1616	SECTION AE102 – APPLICATION TO EXISTING MANUFACTURED HOMES AND BUILDING SERVICE EQUIPMENT SECTION AE102 – APPLICATION TO EXISTING MANUFACTURED HOMES AND BUILDING SERVICE EQUIPMENT
1617	SECTION AE201 – DEFINITIONS SECTION AE201 – DEFINITIONS SECTION AE301 – PERMITS SECTION AE301 – PERMITS
1618	SECTION AE302 – APPLICATION FOR PERMIT SECTION AE302 – APPLICATION FOR PERMIT SECTION AE303 – PERMITS ISSUANCE SECTION AE303 – PERMITS ISSUANCE
1619	SECTION AE304 – FEES SECTION AE304 – FEES
1620	SECTION AE305 – INSPECTIONS SECTION AE305 – INSPECTIONS
1622	SECTION AE306 – SPECIAL INSPECTIONS SECTION AE306 – SPECIAL INSPECTIONS SECTION AE307 – UTILITY SERVICE SECTION AE307 – UTILITY SERVICE SECTION AE401 – OCCUPANCY CLASSIFICATION SECTION AE401 – OCCUPANCY CLASSIFICATION SECTION AE40 2LOCATION ON PROPERTY SECTION AE40 2LOCATION ON PROPERTY SECTION AE501 – DESIGN SECTION AE501 – DESIGN
1623	SECTION AE502 – FOUNDATION SYSTEMS SECTION AE502 – FOUNDATION SYSTEMS SECTION AE503 – SKIRTING AND PERIMETER ENCLOSURES SECTION AE503 – SKIRTING AND PERIMETER ENCLOSURES
1624	SECTION AE504 – STRUCTURAL ADDITIONS SECTION AE504 – STRUCTURAL ADDITIONS SECTION AE505 – BUILDING SERVICE EQUIPMENT SECTION AE505 – BUILDING SERVICE EQUIPMENT SECTION AE506 – EXITS SECTION AE506 – EXITS SECTION AE507 – OCCUPANCY, FIRE SAFETY AND ENERGY CONSERVATION STANDARDS SECTION AE507 – OCCUPANCY, FIRE SAFETY AND ENERGY CONSERVATION STANDARDS SECTION AE600 – SPECIAL REQUIREMENTS FOR FOUNDATION SYSTEMS SECTION AE600 – SPECIAL REQUIREMENTS FOR FOUNDATION SYSTEMS SECTION AE601 – FOOTINGS AND FOUNDATIONS SECTION AE601 – FOOTINGS AND FOUNDATIONS
1625	SECTION AE602 – PIER CONSTRUCTION SECTION AE602 – PIER CONSTRUCTION SECTION AE603 – HEIGHT OF PIERS SECTION AE603 – HEIGHT OF PIERS SECTION AE604 – ANCHORAGE INSTALLATIONS SECTION AE604 – ANCHORAGE INSTALLATIONS
1626	SECTION AE605 – TIES, MATERIALS AND INSTALLATION SECTION AE605 – TIES, MATERIALS AND INSTALLATION SECTION AE606 – REFERENCED STANDARDS SECTION AE606 – REFERENCED STANDARDS BIBLIOGRAPHY BIBLIOGRAPHY
1629	APPENDIX F – RADON CONTROL METHODS APPENDIX F – RADON CONTROL METHODS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION AF101 – SCOPE SECTION AF101 – SCOPE SECTION AF102 – DEFINITIONS SECTION AF102 – DEFINITIONS
1630	SECTION AF103 – REQUIREMENTS SECTION AF103 – REQUIREMENTS
1634	FIGURE AF101 – EPA MAP OF RADON ZONES FIGURE AF101 – EPA MAP OF RADON ZONES
1635	TABLE AF101(1) HIGH RADON POTENTIAL (ZONE 1) COUNTIESa TABLE AF101(1) HIGH RADON POTENTIAL (ZONE 1) COUNTIESa
1636	TABLE AF101(1)—continued HIGH RADON POTENTIAL (ZONE 1) COUNTIESa TABLE AF101(1)—continued HIGH RADON POTENTIAL (ZONE 1) COUNTIESa
1637	FIGURE AF102 -RADON-RESISTANT CONSTRUCTION DETAILS FOR FOUR FOUNDATION TYPES FIGURE AF102 -RADON-RESISTANT CONSTRUCTION DETAILS FOR FOUR FOUNDATION TYPES
1639	APPENDIX G – SWIMMING POOLS, SPAS AND HOT TUBS APPENDIX G – SWIMMING POOLS, SPAS AND HOT TUBS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION AG101 – GENERAL SECTION AG101 – GENERAL
1640	SECTION AG102 – DEFINITIONS SECTION AG102 – DEFINITIONS
1641	SECTION AG103 – SWIMMING POOLS SECTION AG103 – SWIMMING POOLS SECTION AG104 – SPAS AND HOT TUBS SECTION AG104 – SPAS AND HOT TUBS SECTION AG105 – BARRIER REQUIREMENTS SECTION AG105 – BARRIER REQUIREMENTS
1642	FIGURE AG105.2(1) OPENING LIMITATIONS FIGURE AG105.2(1) OPENING LIMITATIONS
1643	FIGURE AG105.2(2) PRIVATE SWIMMING POOL BARRIER CONSTRUCTION FIGURE AG105.2(2) PRIVATE SWIMMING POOL BARRIER CONSTRUCTION
1644	FIGURE AG105.2(3) CHAIN-LINK FENCE MESH FOR PRIVATE SWIMMING POOLS FIGURE AG105.2(3) CHAIN-LINK FENCE MESH FOR PRIVATE SWIMMING POOLS
1645	SECTION AG106 – ENTRAPMENT PROTECTION FOR SWIMMING POOL AND SPA SUCTION OUTLETS SECTION AG106 – ENTRAPMENT PROTECTION FOR SWIMMING POOL AND SPA SUCTION OUTLETS SECTION AG107 – ABBREVIATIONS SECTION AG107 – ABBREVIATIONS SECTION AG108 – STANDARDS SECTION AG108 – STANDARDS
1647	APPENDIX H – PATIO COVERS APPENDIX H – PATIO COVERS GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION AH101 – GENERAL SECTION AH101 – GENERAL SECTION AH102 – DEFINITION SECTION AH102 – DEFINITION SECTION AH103 – PERMITTED USES SECTION AH103 – PERMITTED USES SECTION AH104 – DESIGN LOADS SECTION AH104 – DESIGN LOADS
1648	SECTION AH105 – LIGHT AND VENTILATION/EMERGENCY EGRESS SECTION AH105 – LIGHT AND VENTILATION/EMERGENCY EGRESS SECTION AH106 – FOOTINGS SECTION AH106 – FOOTINGS SECTION AH107 – SPECIAL PROVISIONS FOR ALUMINUM SCREEN ENCLOSURES IN HURRICANE-PRONE REGIONS SECTION AH107 – SPECIAL PROVISIONS FOR ALUMINUM SCREEN ENCLOSURES IN HURRICANE-PRONE REGIONS
1649	TABLE AH107.4(1) DESIGN WIND PRESSURES FOR ALUMINUM SCREEN ENCLOSURE FRAMING WITH AN IMPORTANCE FACTOR OF TABLE AH107.4(1) DESIGN WIND PRESSURES FOR ALUMINUM SCREEN ENCLOSURE FRAMING WITH AN IMPORTANCE FACTOR OF
1650	TABLE AH107.4(2) HEIGHT ADJUSTMENT FACTORS TABLE AH107.4(2) HEIGHT ADJUSTMENT FACTORS BIBLIOGRAPHY BIBLIOGRAPHY
1651	APPENDIX I – PRIVATE SEWAGE DISPOSAL APPENDIX I – PRIVATE SEWAGE DISPOSAL SECTION AI101 – GENERAL SECTION AI101 – GENERAL
1653	APPENDIX J – EXISTING BUILDINGS AND STRUCTURES APPENDIX J – EXISTING BUILDINGS AND STRUCTURES GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION AJ101 – PURPOSE AND INTENT SECTION AJ101 – PURPOSE AND INTENT
1654	SECTION AJ102 – COMPLIANCE SECTION AJ102 – COMPLIANCE
1655	SECTION AJ103 – PRELIMINARY MEETING SECTION AJ103 – PRELIMINARY MEETING SECTION AJ104 – EVALUATION OF AN EXISTING BUILDING SECTION AJ104 – EVALUATION OF AN EXISTING BUILDING
1656	SECTION AJ105 – PERMIT SECTION AJ105 – PERMIT SECTION AJ201 – DEFINITIONS SECTION AJ201 – DEFINITIONS
1657	SECTION AJ301 – REPAIRS SECTION AJ301 – REPAIRS
1658	SECTION AJ401 – RENOVATIONS SECTION AJ401 – RENOVATIONS
1659	SECTION AJ501 – ALTERATIONS SECTION AJ501 – ALTERATIONS
1661	SECTION AJ601 – RECONSTRUCTION SECTION AJ601 – RECONSTRUCTION
1662	BIBLIOGRAPHY BIBLIOGRAPHY
1663	APPENDIX K – SOUND TRANSMISSION APPENDIX K – SOUND TRANSMISSION GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION AK101 – GENERAL SECTION AK101 – GENERAL SECTION AK102 – AIR-BORNE SOUND SECTION AK102 – AIR-BORNE SOUND
1664	SECTION AK103 – STRUCTURAL-BORNE SOUND SECTION AK103 – STRUCTURAL-BORNE SOUND SECTION AK104 – REFERENCED STANDARDS SECTION AK104 – REFERENCED STANDARDS BIBLIOGRAPHY BIBLIOGRAPHY
1665	APPENDIX L – PERMIT FEES APPENDIX L – PERMIT FEES
1667	APPENDIX M – HOME DAY CARE—R-3 OCCUPANCY APPENDIX M – HOME DAY CARE—R-3 OCCUPANCY GENERAL COMMENTS GENERAL COMMENTS PURPOSE PURPOSE SECTION AM101 – GENERAL SECTION AM101 – GENERAL SECTION AM102 – DEFINITIONS SECTION AM102 – DEFINITIONS SECTION AM103 – MEANS OF EGRESS SECTION AM103 – MEANS OF EGRESS
1668	SECTION AM104 – SMOKE DETECTION SECTION AM104 – SMOKE DETECTION
1669	APPENDIX N – VENTING METHODS APPENDIX N – VENTING METHODS FIGURE N1 TYPICAL SINGLE-BATH WET-VENT ARRANGEMENTS FIGURE N1 TYPICAL SINGLE-BATH WET-VENT ARRANGEMENTS
1670	FIGURE N2 TYPICAL DOUBLE-BATH WET-VENT ARRANGEMENTS FIGURE N2 TYPICAL DOUBLE-BATH WET-VENT ARRANGEMENTS
1671	FIGURE N3 TYPICAL HORIZONTAL WET VENTING FIGURE N3 TYPICAL HORIZONTAL WET VENTING
1672	FIGURE N4 TYPICAL METHODS OF WET VENTING FIGURE N4 TYPICAL METHODS OF WET VENTING
1673	FIGURE N5 SINGLE STACK SYSTEM FOR A TWO-STORY DWELLING FIGURE N5 SINGLE STACK SYSTEM FOR A TWO-STORY DWELLING
1674	FIGURE N6 WASTE STACK VENTING FIGURE N6 WASTE STACK VENTING
1675	FIGURE N7 CIRCUIT VENT WITH ADDITIONAL NONCIRCUIT VENTED BRANCH FIGURE N7 CIRCUIT VENT WITH ADDITIONAL NONCIRCUIT VENTED BRANCH
1677	APPENDIX O – GRAY WATER RECYCLING SYSTEMS APPENDIX O – GRAY WATER RECYCLING SYSTEMS SECTION AO101 – GENERAL SECTION AO101 – GENERAL SECTION AO102 – SYSTEMS FOR FLUSHING WATER CLOSETS AND URINALS SECTION AO102 – SYSTEMS FOR FLUSHING WATER CLOSETS AND URINALS
1678	FIGURE AO101.1(1) GRAY WATER RECYCLING SYSTEM FOR FLUSHING WATER CLOSETS AND URINALS FIGURE AO101.1(1) GRAY WATER RECYCLING SYSTEM FOR FLUSHING WATER CLOSETS AND URINALS FIGURE AO101.1(2) GRAY WATER RECYCLING SYSTEM FOR SUBSURFACE LANDSCAPE IRRIGATION FIGURE AO101.1(2) GRAY WATER RECYCLING SYSTEM FOR SUBSURFACE LANDSCAPE IRRIGATION
1679	SECTION AO103 – SUBSURFACE LANDSCAPE IRRIGATION SYSTEMS SECTION AO103 – SUBSURFACE LANDSCAPE IRRIGATION SYSTEMS EQUATION AO-1 EQUATION AO-1
1680	TABLE AO103.8 LOCATION OF GRAY WATER SYSTEM TABLE AO103.8 LOCATION OF GRAY WATER SYSTEM TABLE AO103.9.1 DESIGN LOADING RATE TABLE AO103.9.1 DESIGN LOADING RATE
1681	TABLE AO103.10 DISTRIBUTION PIPE TABLE AO103.10 DISTRIBUTION PIPE
1683	APPENDIX P – SIZING OF WATER PIPING SYSTEM APPENDIX P – SIZING OF WATER PIPING SYSTEM SECTION AP101 – GENERAL SECTION AP101 – GENERAL SECTION AP102 – INFORMATION REQUIRED SECTION AP102 – INFORMATION REQUIRED SECTION AP103 – SELECTION OF PIPE SIZE SECTION AP103 – SELECTION OF PIPE SIZE
1687	TABLE AP.1 TABLE AP.1 TABLE AP.2 TABLE AP.2
1688	FIGURE AP103.3(1) EXAMPLE-SIZING FIGURE AP103.3(1) EXAMPLE-SIZING
1689	TABLE AP103.3(1) RECOMMENDED TABULAR ARRANGEMENT FOR USE IN SOLVING PIPE SIZING PROBL TABLE AP103.3(1) RECOMMENDED TABULAR ARRANGEMENT FOR USE IN SOLVING PIPE SIZING PROBL
1690	TABLE AP103.3(2) LOAD VALUES ASSIGNED TO FIXTURESa TABLE AP103.3(2) LOAD VALUES ASSIGNED TO FIXTURESa
1691	TABLE AP103.3(3) TABLE FOR ESTIMATING DEMAND TABLE AP103.3(3) TABLE FOR ESTIMATING DEMAND
1692	TABLE AP103.3(3)—continued TABLE FOR ESTIMATING DEMAND TABLE AP103.3(3)—continued TABLE FOR ESTIMATING DEMAND TABLE AP103.3(4) LOSS OF PRESSURE THROUGH TAPS AND TEES IN POUNDS PER SQUARE INCH (psi) TABLE AP103.3(4) LOSS OF PRESSURE THROUGH TAPS AND TEES IN POUNDS PER SQUARE INCH (psi)
1693	TABLE AP103.3(5) ALLOWANCE IN EQUIVALENT LENGTHS OF PIPE FOR FRICTION LOSS IN VALVES AND THREADED FITTINGS (feet) TABLE AP103.3(5) ALLOWANCE IN EQUIVALENT LENGTHS OF PIPE FOR FRICTION LOSS IN VALVES AND THREADED FITTINGS (feet) TABLE AP103.3(6) PRESSURE LOSS IN FITTINGS AND VALVES EXPRESSED AS EQUIVALENT LENGTH OF TUBEa (feet) TABLE AP103.3(6) PRESSURE LOSS IN FITTINGS AND VALVES EXPRESSED AS EQUIVALENT LENGTH OF TUBEa (feet)
1694	FIGURE AP103.3(2) FRICTION LOSS IN SMOOTH PIPEa (TYPE K, ASTM B 88 COPPER TUBING) FIGURE AP103.3(2) FRICTION LOSS IN SMOOTH PIPEa (TYPE K, ASTM B 88 COPPER TUBING)
1695	FIGURE AP103.3(3) FRICTION LOSS IN SMOOTH PIPEa (TYPE L, ASTM B 88 COPPER TUBING) FIGURE AP103.3(3) FRICTION LOSS IN SMOOTH PIPEa (TYPE L, ASTM B 88 COPPER TUBING)
1696	FIGURE AP103.3(4) FRICTION LOSS IN SMOOTH PIPEa (TYPE M, ASTM B 88 COPPER TUBING) FIGURE AP103.3(4) FRICTION LOSS IN SMOOTH PIPEa (TYPE M, ASTM B 88 COPPER TUBING)
1697	FIGURE AP103.3(5) FRICTION LOSS IN FAIRLY SMOOTH PIPEa FIGURE AP103.3(5) FRICTION LOSS IN FAIRLY SMOOTH PIPEa
1698	FIGURE AP103.3(6) FRICTION LOSS IN FAIRLY ROUGH PIPEa FIGURE AP103.3(6) FRICTION LOSS IN FAIRLY ROUGH PIPEa
1699	FIGURE AP103.3(7) FRICTION LOSS IN FAIRLY ROUGH PIPEa FIGURE AP103.3(7) FRICTION LOSS IN FAIRLY ROUGH PIPEa
1700	SECTION AP201 – SELECTION OF PIPE SIZE SECTION AP201 – SELECTION OF PIPE SIZE
1701	TABLE AP201.1 MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES (w.s.f.u.) TABLE AP201.1 MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES (w.s.f.u.)
1702	TABLE AP201.1—continued MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES (w.s.f.u. TABLE AP201.1—continued MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES (w.s.f.u.
1703	APPENDIX Q – ICC INTERNATIONAL RESIDENTIAL CODE ELECTRICAL PROVISIONS/NATIONAL ELECTRICAL CODE CROSS-REFEREN APPENDIX Q – ICC INTERNATIONAL RESIDENTIAL CODE ELECTRICAL PROVISIONS/NATIONAL ELECTRICAL CODE CROSS-REFEREN
1717	INDEX INDEX
1729	MEMBERSHIP BENEFITS MEMBERSHIP BENEFITS
1730	MUST HAVE TOOLS FOR YOUR IRC® MUST HAVE TOOLS FOR YOUR IRC®
1731	NEW GUIDELINES FOR GOING GREEN NEW GUIDELINES FOR GOING GREEN
1732	GO-TO RESOURCES FOR YOUR I-CODE GO-TO RESOURCES FOR YOUR I-CODE

Published By	Publication Date	Number of Pages
ICC	2009	1732


PDF Format	Searchable	Printable	Preview Now

Standard Title	International Residential Code and Commentary
Published Code	ICC
Publication Date	2009
Pages Count	1732

IRC Commentary 09 2009

PDF Catalog

Related products