IEC 60384-13:2011
$56.55
Fixed capacitors for use in electronic equipment – Part 13: Sectional specification – Fixed polypropylene film dielectric metal foil d.c. capacitors
Published By | Publication Date | Number of Pages |
IEC | 2011-12-09 | 58 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
IEC 60384-13:2011 applies to fixed direct current capacitors, using as dielectric a polypropylene film with electrodes of thin metal foils. The capacitors covered by this standard are intended for use in electronic equipment. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14. This fourth edition cancels and replaces the third edition published in 2006 and contains the following significant technical changes with respect to the previous edition.
– Table 3, Sampling plan together with numbers of permissible non-conformance for qualification approval test, has been adjusted.
– Table 5, Lot-by-lot inspection, has been changed, highlighting assessment level EZ only.
– Table 6, Periodic inspection, has been changed, highlighting assessment level EZ only.
Published Code | IEC |
---|---|
Published By | International Electrotechnical Commission |
Publication Date | 2011-12-09 |
Pages Count | 58 |
Language | France |
Edition | 4.0 |
File Size | 1.2 MB |
ICS Codes | 31.060.30 - Paper and plastics capacitors |
Related products
-
IEC 60384-13:2020
Fixed capacitors for use in electronic equipment – Part 13: Sectional specification – Fixed polypropylene…
-
BS EN 60384-14-2:2016
Fixed capacitors for use in electronic equipment – Blank detail specification. Fixed capacitors for electromagnetic…
-
AS 61347.2.13:2018
Lamp controlgear – Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules…
-
BS EN 60384-14:2005:2006 Edition
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed capacitors for electromagnetic interference…
-
BS EN 60384-26:2010
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed aluminium electrolytic capacitors with…
-
BS EN 60384-17-1:2005:2006 Edition
Fixed capacitors for use in electronic equipment – Blank detail specification. Fixed metallized polypropylene film…
-
BS EN 60384-23:2015
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed surface mount metallized polyethylene…
-
BS EN IEC 60584-3:2021
Thermocouples – Extension and compensating cables. Tolerances and identification system Published By Publication Date Number…
-
BS EN IEC 60384-21:2019
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed surface mount multilayer capacitors…
-
BS EN 60384-21:2012
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed surface mount multilayer capacitors…
-
BS EN IEC 61439-7:2020
Low-voltage switchgear and controlgear assemblies – Assemblies for specific applications such as marinas, camping sites,…
-
BS EN 60384-3:2016 – TC:2020 Edition
Tracked Changes. Fixed capacitors for use in electronic equipment – Sectional specification. Surface mount fixed…
-
BS EN 60730-1:2011:2012 Edition
Automatic electrical controls for household and similar use – General requirements Published By Publication Date…
-
BS EN 60384-14-1:2016
Fixed capacitors for use in electronic equipment – Blank detail specification. Fixed capacitors for electromagnetic…
-
BS EN 60749-40:2011
Semiconductor devices. Mechanical and climatic test methods – Board level drop test method using a…
-
BS EN 60384-14:2013+A1:2016
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed capacitors for electromagnetic interference…
-
BS EN IEC 60384-26:2018
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed aluminium electrolytic capacitors with…
-
BS EN 61300-1:2011
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures – General and…
-
BS EN 60384-13:2006:2010 Edition
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed polypropylene film dielectric metal…
-
BS EN IEC 61557-5:2021:2022 Edition
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1…
-
BSI 19/30372509 DC:2019 Edition
BS EN IEC 60384-13. Fixed capacitors for use in electronic equipment – Part 13. Sectional…
-
BS EN 60384-25:2015
Fixed capacitors for use in electronic equipment – Sectional specification. Surface mount fixed aluminium electrolytic…
-
BS EN IEC 60684-3-283:2019
Flexible insulating sleeving – Specifications for individual types of sleeving. Sheet 283: Heat-shrinkable, polyolefin sleeving…
-
BS EN 60384-18:2016
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed aluminium electrolytic surface mount…
-
BS EN IEC 60384-21:2024
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed surface mount multilayer capacitors…
-
CSA C22.2 NO. 61347-2-13:21:2021 Edition
Appareillage de lampes – Partie 2-13 : Exigences particulières pour les appareillages électroniques alimentés en…
-
BS EN 60601-2-29:1999
Medical electrical equipment. Particular requirements for safety – Particular requirements for the safety of radiotherapy…
-
BS EN 60929:2011+A1:2016
AC and/or DC-supplied electronic control gear for tubular fluorescent lamps. Performance requirements Published By Publication…
-
BS EN 61000-4-20:2010:2011 Edition
Electromagnetic compatibility (EMC) – Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic…
-
BS EN 60384-17:2005:2006 Edition
Fixed capacitors for use in electronic equipment – Sectional specification: Fixed metallized polypropylene film dielectric…
-
BS EN 62541-5:2011:2012 Edition
OPC unified architecture – Information model Published By Publication Date Number of Pages BSI 2012…
-
BS EN IEC 60384-22:2019
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed surface mount multilayer capacitors…
-
BS EN 60384-13:2012
Fixed capacitors for use in electronic equipment – Sectional specification/ Fixed polypropylene film dielectric metal…
-
BS EN 60749-40:2011
Semiconductor devices. Mechanical and climatic test methods – Board level drop test method using a…
-
BS EN 62541-4:2011:2012 Edition
OPC unified architecture – Services Published By Publication Date Number of Pages BSI 2012 178
-
BS EN 60384-13-1:2006:2009 Edition
Fixed capacitors for use in electronic equipment – Blank detail specification. Fixed polypropylene film dielectric…
-
BS EN 60384-19:2015
Fixed capacitors for use in electronic equipment – Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric…
-
BS EN 60384-1:2001
Fixed capacitors for use in electronic equipment – Generic specification Published By Publication Date Number…
-
BS EN 60384-20:2015
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed metallized polyphenylene sulfide film…
-
BS EN 60384-22:2012
Fixed capacitors for use in electronic equipment – Sectional specification. Fixed surface mount multilayer capacitors…