IEEE 1007 1992
$109.96
IEEE Standard Methods and Equipment for Measuring the Transmission Characteristics of Pulse-Code Modulation (PCM) Telecommunications Circuits and Systems
| Published By | Publication Date | Number of Pages |
| IEEE | 1992 | 146 |
New IEEE Standard – Inactive – Withdrawn. Test equipment requirements and methods for testing the transmission characteristics of PCM telecommunications equipment, circuits, and systems are set forth. The requirements are intended for certification, installation, pre-service, out-of-service operational, and in-service operational tests of the PCM transmission facilities. The PCM equipment that may be tested includes primary multiplex equipment containing analog-digital conversion devices, digital multiplex equipment, digital links, and digital sections. This standard is limited to testing at the analog interfaces of the primary multiplex equipment and the digital interfaces at DS1, DS1C, DS2, and DS3 levels of the North American digital hierarchy. Synchronous multiplex equipment and equipment offering other than 64 kb/s coded voiceband channels are not covered in this standard, nor is signaling parameter measurement.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Title Page |
| 3 | Foreword |
| 4 | Participants |
| 5 | CONTENTS |
| 6 | 1. Introduction 1.1 Scope and Objectives 1.2 References |
| 8 | 2. Terms and Definitions 2.1 Digital Terms and Definitions |
| 14 | 2.2 Voice Frequency Analog Terms and Definitions |
| 15 | 3. General Overview of Standard 3.1 Testing Configurations |
| 16 | 3.2 Test Objectives 3.3 Basic Measurements |
| 17 | 3.4 Test Equipment Functions 4. Standards for Digital Multiplex Equipment Testing and Test Equipment 4.1 Introduction 4.1 Introduction |
| 18 | 4.2 Test Parameters |
| 68 | 4.3 Test Equipment Functions |
| 87 | 4.4 Testing Configurations |
| 105 | 5. Standards for Digital Link Testing, Section Testing, and Test Equipment 5.1 Introduction |
| 106 | 5.2 Test Parameters |
| 110 | 5.3 Test Equipment Functions |
| 124 | 5.4 Testing Configurations |
| 130 | 6. Test Equipment Physical Characteristics and Environment 6.1 Physical Characteristics |
| 132 | 6.2 Identification of Equipment 6.3 Safety Requirements |
| 133 | 6.4 Operating Power |
| 134 | 6.5 Output of Measurement Results |
| 135 | 6.6 Functional Requirements |
| 139 | 6.7 Miscellaneous Requirements |
| 140 | 6.8 Environment |
| 142 | Annex A Transmission Level Points and Digital Milliwatt |
| 146 | Annex B Return Loss |
Related products
-
IEEE 1037-1992
IEEE Standard Terms and Definitions for Surface Acoustic Wave (SAW) Devices Published By Publication Date…
-
IEEE 1327.2 1994
IEEE Standard for Information Technology–Directory Services C Language Interfaces–Binding for Application Program Interface (API) Published…
-
IEEE 1450.3-2007
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Tester…
-
IEEE PC37.41
IEEE Draft Standard for Design Tests and Specifications for High-Voltage (> 1000 V) Fuses and…
-
IEEE 81.2-1991
IEEE Guide for Measurement of Impedance and Safety Characteristics of Large, Extended or Interconnected Grounding…
-
IEEE 1017 1992
IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable Published By Publication Date Number…
-
IEEE 1017-1991
IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable Published By Publication Date Number…
-
IEEE 802.3ab-1999
IEEE Standard for Information Technology – Telecommunications and information exchange between systems – Local and…
-
IEEE 1027-1996
IEEE Standard Method for Measurement of the Magnetic Field in the Vicinity of a Telephone…
-
IEEE 1005-1998
IEEE Standard for Definitions, Symbols, and Characterization of Floating Gate Memory Arrays Published By Publication…
-
IEEE C37.37 1996
IEEE Loading Guide for AC High-Voltage Air Switches (in Excess of 1000 V) Published By…
-
IEEE 1450.3 2007
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Tester…
-
IEEE/ISO/IEC 14515 1:2000/Amd.1 2003
ISO/IEC Standard for Information Technology — Portable Operating System Interface (POSIX(TM)) — Test methods for…
-
IEEE 1307 1996
IEEE Trial Use Guide for Fall Protection for the Utility Industry Published By Publication Date…
-
IEEE 1037 1993
IEEE Standard Terms and Definitions for Surface Acoustic Wave (SAW) Devices Published By Publication Date…
-
IEEE P802.3bm D3.2 Sept2014 DRAFT
IEEE Draft Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 40 Gb/s…
-
IEEE 802.3x-1997
IEEE Standards for Local and Metropolitan Area Networks: Supplements to Carrier Sense Multiple Access With…
-
IEEE 1005 1991
IEEE Standard Definitions and Characterization of Floating Gate Semiconductor Arrays Published By Publication Date Number…
-
IEEE 1307-1996
IEEE Trial Use Guide for Fall Protection for the Utility Industry Published By Publication Date…
-
IEEE C57.115-1991
IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers Rated in Excess of 100 MVA (65C Winding…
-
IEEE 1067 1996
IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on…
-
IEEE 81.2 1992
IEEE Guide for Measurement of Impedance and Safety Characteristics of Large, Extended or Interconnected Grounding…
-
IEEE C37.48 1987
IEEE Guide for Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches,…
-
IEEE 1057-1994
IEEE Standard for Digitizing Waveform Recorders Published By Publication Date Number of Pages IEEE 1994…
-
IEEE 802.12 1995
IEEE Standards for Local and Metropolitan Networks: Demand Priority Access Method, Physical Layer and Repeater…
-
IEEE 1407 1999
IEEE Guide for Accelerated Aging Tests for Medium-Voltage Extruded Electric Power Cables Using Water-Filled Tanks…
-
IEEE 1070 1996
IEEE Guide for the Design and Testing of Transmission Modular Restoration Structure Components Published By…
-
IEEE PC37.41
IEEE Draft Standard for Design Tests and Specifications for High-Voltage (> 1000 V) Fuses and…
-
IEEE ISO IEC 14515 1 2000
ISO/IEC 14515-1:2000, Information Technology — Portable Operating System Interface (POSIX(R)) — Test methods for measuring…
-
IEEE C57.115 1991
IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers Rated in Excess of 100 MVA (65C Winding…
-
IEEE 1450.3-2007
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Tester…
-
IEEE C62.42 1993
IEEE Guide for the Application of Gas Tube and Air Gap Arrester Low-Voltage (Equal to…
-
IEEE 1005 1999
IEEE Standard for Definitions, Symbols, and Characterization of Floating Gate Memory Arrays Published By Publication…
-
IEEE 802.12-1995
IEEE Standards for Local and Metropolitan Networks: Demand Priority Access Method, Physical Layer and Repeater…
-
IEEE 1027 1996
IEEE Standard Method for Measurement of the Magnetic Field in the Vicinity of a Telephone…
-
IEEE 1007-1991
IEEE Standard Methods and Equipment for Measuring the Transmission Characteristics of Pulse-Code Modulation (PCM) Telecommunications…
-
IEEE STD 142 2007
(Revision of IEEE Std 142-1991) IEEE Recommended Practice for Grounding of Industrial and Commercial Power…
-
IEEE 1067 1991
IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on…
-
IEEE 1057 1994
IEEE Standard for Digitizing Waveform Recorders Published By Publication Date Number of Pages IEEE 1994…
-
IEEE 1107 1996
IEEE Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing…
