IEEE 1035 1989
$23.29
IEEE Recommended Practice: Test Procedure for Utility-Interconnected Static Power Converters
| Published By | Publication Date | Number of Pages |
| IEEE | 1989 | 28 |
New IEEE Standard – Inactive – Withdrawn. A test procedure that applies to single- and three-phase units rated from 1 kW to 500 kW and may also be applied in principle to larger units is given. The objective is the measurement of electrical parameters at the ac terminals of the power converter. The procedure may serve as a basis for factory or acceptance testing. It focuses on equipment that lends itself to mass production and is readily interconnected to an electric utility, rather than on equipment subject to site-specific design and testing. Test results may be used in evaluating or comparing different types of static power converters. Only equipment with the primary function of delivering electric energy to circuits interconnected with the electric utility is covered by this procedure.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 9 | Scope and References 1.1 Scope 1.2 References Terms and Definitions Static Power Converter (SPC) 2.2 Islanding 2.3 Utility Interconnection Point 2.4 Total Harmonic Distortion (THD) 2.5 Total Distortion (TD) Testing Overview |
| 10 | Test Procedures-Power Factor and Harmonics Measurements 4.1 General |
| 12 | 4.1.1 Total Harmonic Distortion (THD) versus Total Distortion (TD) 4.1.2 Power Factor |
| 13 | 4.2 Test Equipment |
| 14 | 4.3 Test Requirements and Setup 4.3.1 Total Harmonic Distortion (THD) 4.3.2 Power Factor 4.4 Circuit Descriptions and Block Diagrams |
| 15 | Sample Current Harmonic Distortion Data Form Using Percent Amplitudes |
| 16 | 4.5 Test Procedures Sample Harmonics Spectrum Using Decibel (dB) Amplitudes |
| 17 | 5.1 General Block Diagram for Utility Voltagemequency Tests |
| 18 | 5.3 Test EquipmentSystem and Subsystem Tests 5.4 Circuit Descriptions and Block Diagrams 5.5 Test Procedures Instrumentation for Utility VoltageD™requency Tests |
| 19 | Test Procedures-Time for SPC Disconnect 6.1 General |
| 20 | 6.2 Test Equipment 6.3 Test Requirements 6.4 Circuit Descriptions and Block Diagrams Block Diagram for Utility Voltage ï¬rip and Threshold Tests |
| 21 | Instrument Connections for Voltage Trip and Threshold Tests Block Diagram for Multiple SPC Islanding Tests |
| 22 | 6.5 Test ProceduresCPC Time to TripBhutdown Instrument Connections for Multiple SPC Islanding Tests |
| 23 | Sample Chart Recording for a Utility Disconnect Test |
| 24 | 7 Test Procedureoonducted and Radiated EM1 Detection 7.1 General Oscillograph Recording for a Multiple SPC Islanding Test |
| 25 | 7.2 Test Equipment 7.3 Test Requirements Circuit Descriptions and Block Diagrams 7.5 Test Procedures |
| 26 | 8 Bibliography |
| 28 | Appendix Total Harmonic Distortion (THD) and Total Distortion (TD) Measurements |
Related products
-
IEEE 1005-1998
IEEE Standard for Definitions, Symbols, and Characterization of Floating Gate Memory Arrays Published By Publication…
-
IEEE 8802-3-2014
ISO/IEC/IEEE International Standard for Ethernet Published By Publication Date Number of Pages IEEE 2014 3754
-
IEEE 802.3-2005
IEEE Standard for Information Technology – Telecommunications and Information Exchange Between Systems – Local and…
-
IEEE 802.11-2020
IEEE Standard for Information Technology–Telecommunications and Information Exchange between Systems – Local and Metropolitan Area…
-
IEEE 802.3-2018
IEEE Standard for Ethernet (Superseded Redline) Published By Publication Date Number of Pages IEEE 2018…
-
IEEE 802.11-2020(Redline)
IEEE Standard for Information Technology–Telecommunications and Information Exchange between Systems – Local and Metropolitan Area…
-
IEEE 1445 1998:1999 Edition
IEEE Standard for Digital Test Interchange Format (DTIF) Published By Publication Date Number of Pages…
-
IEEE 1030 1988
IEEE Guide for Specification of High-Voltage Direct-Current Systems: Part 1 – Steady State Performance Published…
-
ASME NQA.TR 2020
ASME NQA.TR-2020: Evolution of Quality Assurance Principles and Requirements in the U.S. Nuclear Industry Published…
-
IEEE 1301.2 1993
IEEE Recommended Practices for the Implementation of a Metric Equipment Practice (IEEE Std 1301-1991) Published…
-
IEEE 45 1998
IEEE Recommended Practice for Electric Installations on Shipboard Published By Publication Date Number of Pages…
-
IEEE C37.14-2002
IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures Published By Publication Date…
-
IEEE 149 1977:1979 Edition
IEEE Standard Test Procedures for Antennas Published By Publication Date Number of Pages IEEE 1979…
-
BICSI TDMM 15 v1 2024
BICSI Telecommunications Distribution Methods Manual (TDMM), 15th Edition Published By Publication Date Number of Pages…
-
IEEE 595 1982
IEEE Standard Serial Highway Interface System (CAMAC) (Computer Automated Measurement and Control) Published By Publication…
-
IEEE 595-1982
IEEE Standard Serial Highway Interface System (CAMAC) (Computer Automated Measurement and Control) Published By Publication…
-
IEEE 802.3-2008
IEEE Standard for Information technology–Telecommunications and information exchange between systems–Local and metropolitan area networks–Specific requirements…
-
IEEE 493 1998
IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (Gold Book)…
-
IEEE 802.3-2018(Redline)
IEEE Standard for Ethernet (Redline) Published By Publication Date Number of Pages IEEE 2018
-
IEEE ISO IEC 21451 1 2010
ISO/IEC/IEEE Standard for Information technology — Smart transducer interface for sensors and actuators — Part…
-
IEEE 649 1991:1992 Edition
IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations Published…
-
IEEE 142-1982
IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems (IEEE Green Book) Published…
-
IEEE 1003.1-2008
IEEE Standard for Information Technology – Portable Operating System Interface (POSIX(TM)) Published By Publication Date…
-
IEEE P1450.1
IEEE Draft Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for…
-
IEEE 1033 1984
IEEE Recommended Practice for Application of IEEE Std 828 to Nuclear Power Generating Stations Published…
-
IEEE 8802-3-2014
ISO/IEC/IEEE International Standard for Ethernet Published By Publication Date Number of Pages IEEE 2014 3754
-
IEEE ANSI C37.1 1987
IEEE Standard Definition, Specification, and Analysis of Systems Used for Supervisory Control, Data Acquisition, and…
-
IEEE ISO IEC 8802 3 2014
ISO/IEC/IEEE International Standard for Ethernet Published By Publication Date Number of Pages IEEE 2014 3754
-
IEEE 1005 1999
IEEE Standard for Definitions, Symbols, and Characterization of Floating Gate Memory Arrays Published By Publication…
-
IEEE 1149.7 2010
IEEE Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture Published By Publication…
-
IEEE 1800-2012
IEEE Standard for SystemVerilog–Unified Hardware Design, Specification, and Verification Language Published By Publication Date Number…
-
IEEE 802.3-2018
IEEE Standard for Ethernet (Superseded Redline) Published By Publication Date Number of Pages IEEE 2018
-
IEEE 142-1982
IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems (IEEE Green Book) Published…
-
IEEE P802.11 REVmc D3.0 June2014 DRAFT
IEEE Draft Standard for Information technology–Telecommunications and information exchange between systems Local and metropolitan area…
-
IEEE 802.11-2020
IEEE Standard for Information Technology–Telecommunications and Information Exchange between Systems – Local and Metropolitan Area…
-
IEEE 142 1982
IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems (IEEE Green Book) Published…
-
IEEE 1149.7-2009
IEEE Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture (Inactive Reserved) Published…
-
IEEE 802.3 2018
IEEE Standard for Ethernet Published By Publication Date Number of Pages IEEE 2018
-
IEEE 1149.7-2009
IEEE Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture Published By Publication…
-
IEEE 649-1991
IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations Published…
