Shopping Cart

No products in the cart.

IEEE 1901-2020(Redline)

$373.75

IEEE Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications (Redline)

Published By Publication Date Number of Pages
IEEE 2020 1622
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Revision Standard – Active. Physical (PHY) and media access control (MAC) layers of a broadband powerline communication technology for local area networks (LANs), Smart Energy, Smart Grid, Internet of Things, transportation platforms (vehicle) applications, and other data distribution are defined in this standard. The balanced and efficient use of the power line communications channel by all classes of BPL devices is the main focus of this standard, defining detailed mechanisms for coexistence and interoperability between different BPL devices, and ensuring that desired bandwidth and quality of service may be delivered. The necessary security questions are addressed to ensure the privacy of communications between users and to allow the use of BPL for security sensitive services.

PDF Catalog

PDF Pages PDF Title
1 IEEE Std 1901™-2020 Front Cover
2 Title Page
4 Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents
7 Participants
15 Introduction
17 Contents
21 1 Overview
1.1 Scope
1.2 Purpose
1.3 Protocols
22 1.4 Overview of annexes
24 1.5 Word usage
2 Normative references
26 3 Definitions, acronyms, and abbreviations
3.1 Definitions
42 3.2 Acronyms and abbreviations
51 4 General description
4.1 Overall requirement
4.2 General description of IEEE 1901 networks
4.2.1 How the power line medium is different
4.2.1.1 Pre-existent medium
52 4.2.1.2 Adverse medium
4.2.1.3 Open medium
4.2.1.4 Regulatory variation
4.2.2 Destination address does not equal destination location
4.2.3 The medium’s impact on design and performance
53 4.2.4 The impact of nomadic stations
4.2.5 Power management impact on a station’s status
4.2.6 Support of standard interactions
4.2.6.1 Interaction with IEEE 802 layers
4.2.6.2 Interaction with non-IEEE protocols
4.3 General description of an IEEE 1901 network architecture
54 4.3.1 In-home background
55 4.3.2 The basic service set (BSS)
56 4.3.3 BSS concepts
4.3.3.1 Physical network
58 4.3.3.2 SubBSSs (FFT only)
4.3.3.3 Communication inside a BSS
4.3.4 Access background
60 4.3.4.1 Access cell
4.3.4.1.1 Core cell (FFT only)
4.3.4.1.2 Core cell (wavelet only)
4.3.4.2 SubBSSs/subcells (FFT only)
4.3.4.2.1 Access subcell
61 4.3.4.2.2 In-home subcell
62 4.3.4.2.3 Differences between access subcell and in-home subcell
4.3.4.3 Access gateway (AG)
63 4.3.5 Station roles
4.3.5.1 FFT in-home stations
64 4.3.5.2 Wavelet in-home and access stations
4.3.5.3 FFT access stations
4.3.5.4 STA membership in a BSS is dynamic
65 4.3.5.5 Station addressing for 1901 wavelet stations
4.3.5.6 Station addressing for 1901 FFT stations
4.3.6 MPDU OSTEI/ODTEI/SNID addressing on FFT access control and data plane
66 4.3.7 Differences between an FFT in-home BSS and FFT access cell
4.3.8 Multi-BSS concepts
4.3.8.1 Distribution system concepts
67 4.3.8.2 Portals
68 4.3.8.3 Extended service set (ESS)—Large area coverage network
70 4.3.9 IEEE 1901 QoS facility
71 4.3.10 Multiple logical address spaces
4.3.11 Logical service interfaces
4.3.11.1 In-home logical service interfaces
72 4.3.11.1.1 Station service (SS)
4.3.11.1.2 Distribution system service (DSS)
73 4.3.12 Overview of the services
74 4.3.12.1 Distribution of frames within a DS
4.3.12.1.1 Distribution
4.3.12.1.2 Integration
75 4.3.12.1.3 QoS traffic scheduling
4.3.12.2 Services that support the distribution service
4.3.12.2.1 Portability types
76 4.3.12.2.2 Association
4.3.12.2.3 Reassociation
77 4.3.12.2.4 Disassociation
4.3.12.3 Access control and data confidentiality services
4.3.12.3.1 Authentication
78 4.3.12.3.2 Preauthentication
4.3.12.3.3 Deauthentication
79 4.3.12.3.4 Data confidentiality
4.3.12.3.5 Key management
4.3.12.3.6 Data origin authenticity
4.3.12.3.7 Replay detection
4.3.12.4 Range management services
4.3.12.4.1 TPC
80 4.3.12.4.2 DFS
4.3.12.5 Support for higher layer timer synchronization
4.3.12.6 Reliable frame delivery
81 4.3.12.7 Traffic differentiation, traffic reservation, and QoS support
4.3.12.7.1 BM controlled medium access scheduling
82 4.3.12.7.2 FFT access network medium access scheduling
4.3.12.7.3 Priority
83 4.3.12.7.4 QoS summary
4.3.13 Reference model
4.3.14 Security systems
84 4.3.14.1 Device-based security network (DSN)
4.3.14.2 Pairwise security network (PSN)
4.3.14.3 Robust security network (RSN)
85 4.3.14.3.1 RSN usage of IEEE Std 802.1X-2020
4.3.15 IEEE 1901 operation under various regulatory jurisdictions
4.4 General description of the coexistence architecture
86 4.4.1 Overview of 1901 coexistence mechanisms
4.4.2 Frequency bands
87 4.4.3 ISP signaling
4.5 Conventions
4.5.1 FFT message nomenclature
88 4.5.2 Message sequence charts (MSCs)
89 4.5.3 Text conventions
4.5.3.1 Binary representation
4.5.3.2 Hexadecimal representation
4.5.3.3 Decimal representation
5 MAC service definition
5.1 Overview of MAC services
5.1.1 Data service
90 5.1.1.1 Two types of link
5.1.1.1.1 Link connection
91 5.1.1.1.2 Link Stream
5.1.1.2 Determination of UP
5.1.1.3 Interpretation of the Priority parameter in MAC service primitives
92 5.1.1.4 Interpretation of Service Class parameter in MAC service primitives in a STA
5.1.2 Security services
93 5.1.3 MSDU ordering
5.1.4 MSDU format
5.1.5 MAC data service architecture
94 5.1.6 MAC management service architecture
95 5.2 Detailed MAC data services specification
5.2.1 MA-UNITDATA.request
5.2.1.1 Function
96 5.2.1.2 Semantics of the service primitive
98 5.2.1.3 When generated
5.2.1.4 Effect of receipt
5.2.2 MA-UNITDATA.indication
5.2.2.1 Function
5.2.2.2 Semantics of the service primitive
99 5.2.2.3 When generated
100 5.2.2.4 Effect of receipt
5.2.3 MA-UNITDATA.confirm
5.2.3.1 Function
5.2.3.2 Semantics of the service primitive
101 5.2.3.3 When generated
5.2.3.4 Effect of receipt
6 Frame formats
6.1 MAC frame formats
6.2 Documentation conventions
102 6.2.1 Bit and octet transmission order at the MAC-PHY interface
103 6.2.2 Reserved fields
6.3 General FFT MAC frame format
104 6.3.1 MAC Frame Header
105 6.3.2 2-level concatenation FLAGS (2LFLAGS)
6.3.2.1 Ethernet Header Not Present Flag (EHNPF)
6.3.2.2 RSVD
6.3.3 The Arrival Timestamp (ATS)/Confounder (ATS/CONFOUNDER)
6.3.4 Original Destination Terminal Equipment Identifier (ODTEI)
106 6.3.5 Traffic Class Identifier (TCID)
6.3.6 Original Source Terminal Equipment Identifier (OSTEI)
6.3.7 Connection Identifier (CID)
6.3.8 HOP Count (HOP_CNT)
6.3.9 End-to-end Encryption Flag (EE_EF)
6.3.10 End-to-end Encryption Key Select (EE_EKS)
6.3.11 End-to-end Encryption Reserved Field (EE_RSVD)
107 6.3.12 End-to-end Initialization Vector (EE_IV)
6.3.13 Original Destination Address (ODA)
6.3.14 Original Source Address (OSA)
6.3.15 VLAN Tag
6.3.16 The EtherType/LEN (EType/LEN)
6.3.17 Payload
6.3.18 Integrity Check Value (ICV)
6.4 FFT MPDU formats
6.4.1 In-home FFT MPDU formats
109 6.4.1.1 MPDU Frame Control fields
6.4.1.1.1 TIA-1113 Frame Control field
6.4.1.1.2 Delimiter Type (DT_IH)
110 6.4.1.1.3 Access field (ACCESS)
6.4.1.1.4 Short Network ID (SNID)
6.4.1.1.5 Variant fields (VF_IH)
111 6.4.1.1.5.1 Beacon fields
6.4.1.1.5.1.1 Beacon Timestamp (BTS)
6.4.1.1.5.1.2 Beacon Transmission Offset (0 to 3)
112 6.4.1.1.5.2 Start-of-Frame (SOF) fields
113 6.4.1.1.5.2.1 Source Terminal Equipment Identifier (STEI)
6.4.1.1.5.2.2 Destination Terminal Equipment Identifier (DTEI)
6.4.1.1.5.2.3 Link Identifier (LID)
6.4.1.1.5.2.4 Contention-Free Session (CFS)
6.4.1.1.5.2.5 Beacon Detect Flag (BDF)
6.4.1.1.5.2.6 TIA-1113 Detect Flag (HP10DF)
114 6.4.1.1.5.2.7 1901-aware-TIA-1113 Detect Flag (HP11DF)
6.4.1.1.5.2.8 Encryption Key Select (EKS)
6.4.1.1.5.2.9 Pending PHY Blocks (PPBs)
115 6.4.1.1.5.2.10 Bit Loading Estimate (BLE)
6.4.1.1.5.2.11 PHY Block Size (PBSz)
6.4.1.1.5.2.12 Number of Symbols (NumSym)
116 6.4.1.1.5.2.13 Tone Map Index (TMI)
6.4.1.1.5.2.14 Frame Length (FL)
117 6.4.1.1.5.2.15 MPDU Count (MPDUCnt)
6.4.1.1.5.2.16 Burst Count (BurstCnt)
118 6.4.1.1.5.2.17 Bidirectional Burst Flag (BBF)
6.4.1.1.5.2.18 Maximum Reverse Transmission Frame Length (MRTFL)
6.4.1.1.5.2.19 Different CP PHY Clock Flag (DCPPCF)
6.4.1.1.5.2.20 Multicast Flag (MCF)
119 6.4.1.1.5.2.21 Multi-Network Broadcast Flag (MNBF)
6.4.1.1.5.2.22 Request SACK Retransmission (RSR)
6.4.1.1.5.2.23 MAC SAP Type (MST)
6.4.1.1.5.2.24 Management MAC Frame Stream Command (MFSCmdMgmt)
120 6.4.1.1.5.2.25 Data MAC Frame Stream Command (MFSCmdData)
6.4.1.1.5.2.26 Management MAC Frame Stream Response (MFSRspMgmt)
6.4.1.1.5.2.27 Data MAC Frame Stream Response (MFSRspData)
6.4.1.1.5.2.28 Bit Map SACK Information (BM-SACKI)
121 6.4.1.1.5.3 Selective Acknowledgment (SACK) fields
122 6.4.1.1.5.3.1 Destination Terminal Equipment Identifier (DTEI)
6.4.1.1.5.3.2 Contention-Free Session (CFS)
6.4.1.1.5.3.3 Beacon Detect Flag (BDF)
6.4.1.1.5.3.4 SACK Version Number (SVN)
6.4.1.1.5.3.5 Request Reverse Transmission Flag (RRTF)
6.4.1.1.5.3.6 Data MAC Frame Stream Response (MFSRspData)
6.4.1.1.5.3.7 Management MAC Frame Stream Response (MFSRspMgmt)
123 6.4.1.1.5.3.8 SACK Data (SACKD)
6.4.1.1.5.3.8.1 SACK Type (SACKT[3] – SACKT[0])
6.4.1.1.5.3.8.2 SACK Information (SACKI[3] – SACKI[0])
6.4.1.1.5.3.8.3 Bit Map SACK Information (SACKT = 0b00)
6.4.1.1.5.3.8.4 Compressed Bitmap SACK Information (SACKT = 0b01)
124 6.4.1.1.5.3.8.5 Uniform SACK Information (SACKT = 0b11)
125 6.4.1.1.5.3.9 Bit Pad (BitPad)
6.4.1.1.5.3.10 Receive Window Size (RxWSz)
6.4.1.1.5.3.11 Request Reverse Transmission Length (RRTL)
126 6.4.1.1.5.4 Request to Send/Clear To Send (RTS/CTS) fields
127 6.4.1.1.5.4.1 Source Terminal Equipment Identifier (STEI)
6.4.1.1.5.4.2 Destination Terminal Equipment Identifier (DTEI)
6.4.1.1.5.4.3 Link Identifier (LID)
6.4.1.1.5.4.4 Contention-Free Session (CFS)
6.4.1.1.5.4.5 Beacon Detect Flag (BDF)
6.4.1.1.5.4.6 TIA-1113 Detect Flag (HP10DF)
6.4.1.1.5.4.7 1901-aware-TIA-1113 Detect Flag (HP11DF)
128 6.4.1.1.5.4.8 RTS Flag (RTSF)
6.4.1.1.5.4.9 Immediate Grant Flag (IGF)
6.4.1.1.5.4.10 Multi-Network Broadcast Flag (MNBF)
6.4.1.1.5.4.11 Multicast Flag (MCF)
6.4.1.1.5.4.12 Duration (DUR)
130 6.4.1.1.5.5 Sound MPDU fields
131 6.4.1.1.5.5.1 Source Terminal Equipment Identifier (STEI)
6.4.1.1.5.5.2 Destination Terminal Equipment Identifier (DTEI)
6.4.1.1.5.5.3 Contention-Free Session (CFS)
6.4.1.1.5.5.4 PHY Block Size (PBSz)
6.4.1.1.5.5.5 Beacon Detect Flag (BDF)
132 6.4.1.1.5.5.6 Sound ACK Flag (SAF)
6.4.1.1.5.5.7 Sound Complete Flag (SCF)
6.4.1.1.5.5.8 Tone Maps Requested (REQ_TM)
6.4.1.1.5.5.9 Frame Length (FL)
6.4.1.1.5.5.10 MPDU Count (MPDUCnt)
6.4.1.1.5.5.11 Pending PHY Blocks (PPBs)
133 6.4.1.1.5.5.12 Link Identifier (LID)
6.4.1.1.5.5.13 Sound Reason Code
6.4.1.1.5.5.14 Additional Tone Maps Requested (ADD_REQ_TM)
6.4.1.1.5.5.15 Extended Carriers Support Flag (ECSF)
6.4.1.1.5.5.16 Extended Carriers Used Flag (ECUF)
134 6.4.1.1.5.5.17 Maximum PBs per Symbol (MAX_PB_SYM)
6.4.1.1.5.6 Reverse SOF fields
135 6.4.1.1.5.6.1 Destination Terminal Equipment Identifier (DTEI)
6.4.1.1.5.6.2 Contention-Free Session (CFS)
6.4.1.1.5.6.3 Beacon Detect Flag (BDF)
6.4.1.1.5.6.4 SACK Version Number (SVN)
6.4.1.1.5.6.5 Receive Window Size (RxWSz)
6.4.1.1.5.6.6 Request Reverse Transmission Flag (RRTF)
136 6.4.1.1.5.6.7 Data MAC Frame Stream Response (MFSRspData)
6.4.1.1.5.6.8 Management MAC Frame Stream Response (MFSRspMgmt)
6.4.1.1.5.6.9 SACK Data (SACKD)
6.4.1.1.5.6.10 Request Reverse Transmission Length (RRTL)
6.4.1.1.5.6.11 Reverse SOF Frame Length (RSOF_FL)
6.4.1.1.5.6.12 Tone Map Index (TMI)
6.4.1.1.5.6.13 PHY Block Size (PBSz)
6.4.1.1.5.6.14 Number of Symbols (NumSym)
137 6.4.1.1.5.6.15 Management MAC Frame Stream Command (MFSCmdMgmt)
6.4.1.1.5.6.16 Data MAC Frame Stream Command (MFSCmdData)
6.4.1.1.6 Frame Control Check Sequence (FCCS)
6.4.1.2 Format of long MPDU payload
138 6.4.1.2.1 Format of PHY blocks
6.4.1.2.1.1 PHY Block Header
139 6.4.1.2.1.1.1 Segment Sequence Number (SSN)
6.4.1.2.1.1.2 MAC Frame Boundary Offset (MFBO)
6.4.1.2.1.1.3 Valid PHY Block Flag (VPBF)
6.4.1.2.1.1.4 Management Message Queue Flag (MMQF)
140 6.4.1.2.1.1.5 MAC Frame Boundary Flag (MFBF)
6.4.1.2.1.1.6 Oldest Pending Segment Flag (OPSF)
6.4.1.2.1.2 PHY Block Body
6.4.1.2.1.3 PHY Body Check Sequence (PBCS)
6.4.1.2.2 MAC frame format for 2-level concatenation
141 6.4.1.2.2.1 MAC Frame Header
6.4.1.2.2.1.1 MAC Frame Type (MFT)
143 6.4.1.2.2.1.2 MAC Frame Length (MFL)
6.4.1.2.2.2 2-level concatenation FLAGS (2LFLAGS)
6.4.1.2.2.3 The Arrival Timestamp (ATS) / Confounder (CONFOUNDER)
6.4.1.2.2.4 Original Destination Address (ODA)
6.4.1.2.2.5 Original Source Address (OSA)
6.4.1.2.2.6 VLAN Tag
6.4.1.2.2.7 The EtherType/LEN (EType/LEN)
6.4.1.2.2.8 Payload
6.4.1.2.2.9 Integrity Check Value
6.4.1.2.3 Management Message format
144 6.4.1.2.3.1 Original Destination Address (ODA)
6.4.1.2.3.2 Original Source Address (OSA)
6.4.1.2.3.3 VLAN Tag
6.4.1.2.3.4 MTYPE
6.4.1.2.3.5 Management Message Version (MMV)
145 6.4.1.2.3.6 Management Message Type (MMTYPE)
6.4.1.2.3.7 Fragment Management Information (FMI)
146 6.4.1.2.3.8 Management Message Entry Data (MME)
152 6.4.1.2.3.9 MME PAD
153 6.4.1.3 Format of sound MPDU payload
6.4.1.3.1 Zero Pad (ZPAD)
6.4.1.3.2 Sound Payload Check Sequence (SPCS)
6.4.1.4 Format of Beacon MPDU payload
154 6.4.1.4.1 Network Identifier (NID)
155 6.4.1.4.2 1901 FFT Hybrid Mode (HM)
6.4.1.4.3 Source Terminal Equipment Identifier (STEI)
6.4.1.4.4 Beacon Type (BT)
156 6.4.1.4.5 Uncoordinated Networks Reported (UCNR)
6.4.1.4.6 Network Power-Saving Mode (NPSM)
6.4.1.4.7 Number of Beacon Slots (NumSlots)
6.4.1.4.8 Beacon Slot Usage (SlotUsage)
157 6.4.1.4.9 Beacon Slot ID (SlotID)
6.4.1.4.10 AC Line Cycle Synchronization Status (ACLSS)
6.4.1.4.11 Handover In Progress (HOIP)
6.4.1.4.12 RTS Broadcast Flag (RTSBF)
6.4.1.4.13 Network Mode (NM)
158 6.4.1.4.14 BM Capability (BMCap)
6.4.1.4.15 Reusable SNID Flag (RSF)
6.4.1.4.16 Proxy Level (Plevel)
6.4.1.4.17 Beacon Management Information (BMI)
159 6.4.1.4.17.1 Number of Beacon Entries (NBE)
6.4.1.4.17.2 Beacon Entry Header (BEHDR)
161 6.4.1.4.17.3 Beacon Entry Length (BELEN)
162 6.4.1.4.17.4 Beacon Entry (BENTRY)
6.4.1.4.17.5 Nonpersistent Schedule BENTRY
6.4.1.4.17.5.1 Number of Sessions (NS)
6.4.1.4.17.5.2 Session Allocation Information (SAI)
163 6.4.1.4.17.5.2.1 Start Time Present Flag (STPF)
6.4.1.4.17.5.2.2 Global Link Identifier (GLID)
6.4.1.4.17.5.2.3 Start Time (ST)
6.4.1.4.17.5.2.4 End Time (ET)
6.4.1.4.17.6 Persistent Schedule BENTRY
164 6.4.1.4.17.6.1 Preview Schedule Countdown (PSCD)
6.4.1.4.17.6.2 Current Schedule Countdown (CSCD)
165 6.4.1.4.17.6.3 Number of Sessions (NS)
6.4.1.4.17.6.4 Session Allocation Information (SAI)
6.4.1.4.17.7 Regions BENTRY
6.4.1.4.17.7.1 Number of Regions (NR)
166 6.4.1.4.17.7.2 Region Type (RT)
6.4.1.4.17.7.3 Region End Time (RET)
6.4.1.4.17.8 MAC Address BENTRY
167 6.4.1.4.17.9 Discover BENTRY
6.4.1.4.17.10 Discovered Info BENTRY
168 6.4.1.4.17.10.1 Updated
6.4.1.4.17.10.2 BM Capability
6.4.1.4.17.10.3 Proxy Networking Capability
6.4.1.4.17.10.4 Backup BM Capability
169 6.4.1.4.17.10.5 BM Status
6.4.1.4.17.10.6 PBM Status
6.4.1.4.17.10.7 Backup BM Status
6.4.1.4.17.10.8 NumDisSTA
6.4.1.4.17.10.9 NumDisNet
6.4.1.4.17.11 Beacon Period Start Time Offset (BPSTO) BENTRY
170 6.4.1.4.17.12 Encryption Key Change BENTRY
6.4.1.4.17.12.1 Key Change Countdown (KCCD)
6.4.1.4.17.12.2 Key Being Changed (KBC)
6.4.1.4.17.12.3 New Key’s EKS (NewEKS)
171 6.4.1.4.17.13 BM Handover BENTRY
6.4.1.4.17.13.1 Handover Countdown (HCD)
6.4.1.4.17.13.2 New BM TEI (NCTEI)
6.4.1.4.17.14 Beacon Relocation BENTRY
6.4.1.4.17.14.1 Relocation Countdown (RCD)
172 6.4.1.4.17.14.2 Relocation Type (RLT)
6.4.1.4.17.14.3 Leaving Group Flag (LGF)
6.4.1.4.17.14.4 Relocation Offset (RLO)
173 6.4.1.4.17.14.5 Relocation SlotID (RLSlotID)
6.4.1.4.17.15 AC Line Sync Countdown BENTRY
6.4.1.4.17.16 Change NumSlots BENTRY
6.4.1.4.17.16.1 NumSlot Change Countdown (NSCCD)
174 6.4.1.4.17.16.2 New NumSlot Value (NewNumSlot)
6.4.1.4.17.17 Change HM BENTRY
6.4.1.4.17.17.1 1901 FFT Hybrid Mode Change Countdown (HMCCD)
6.4.1.4.17.17.2 New 1901 FFT Hybrid Mode Value (NewHM)
6.4.1.4.17.18 Change SNID BENTRY
175 6.4.1.4.17.18.1 SNID Change Countdown (SCCD)
6.4.1.4.17.18.2 New SNID Value
6.4.1.4.17.19 RSN Information Element BENTRY
6.4.1.4.17.20 ISP BENTRY
6.4.1.4.17.20.1 ISP Offset (ISPOFST)
176 6.4.1.4.17.20.2 ISP State Access (ISPSTA)
6.4.1.4.17.20.3 ISP State Wavelet (ISPSTW)
6.4.1.4.17.20.4 ISP State G.hn (ISPSTG)
6.4.1.4.17.20.5 ISP Signal Type (ISPST)
6.4.1.4.17.20.6 Number of TEI Entries (Num TEI)
177 6.4.1.4.17.21 Extended Band Stay Out BENTRY
6.4.1.4.17.22 AG Assignment BENTRY
6.4.1.4.17.23 Extended Carriers Support BENTRY
6.4.1.4.17.24 Vendor-Specific BENTRY
6.4.1.4.18 Octet Pad (OPAD)
6.4.1.4.19 Beacon Payload Check Sequence (BPCS)
178 6.4.2 Access system FFT MPDU formats
6.4.2.1 Beacon MPDU fields
6.4.2.1.1 Beacon Level (BL)
6.4.2.1.2 Beacon Period Count (BPC)
6.4.2.1.3 Station Capability (STACAP)
6.4.2.1.4 HOP Count (HOP_CNT)
6.4.2.1.5 Effective Bit Loading Estimate for Downstream (EBLE_DOWN)
179 6.4.2.1.6 Effective Bit Loading Estimate for Upstream (EBLE_UP)
6.4.2.1.7 Beacon Period Start Time Offset BENTRY
6.4.2.1.8 TDMA Schedule BENTRY
182 6.4.2.1.9 Backup HE Status BENTRY
183 6.4.2.2 MPDU Frame Control fields
184 6.4.2.2.1 TIA-1113 Frame Control
6.4.2.2.2 Delimiter Type (DT_AC)
6.4.2.2.3 Access field (ACCESS)
6.4.2.2.4 Short Network ID (SNID)
185 6.4.2.2.5 Variant fields (VF_Access)
6.4.2.2.5.1 Beacon fields
186 6.4.2.2.5.1.1 Beacon Timestamp (BTS)
6.4.2.2.5.1.2 Beacon Level (BL)
6.4.2.2.5.1.3 PHY Block Size (PBSz)
6.4.2.2.5.1.4 SNID Extension (SNID_EXT)
6.4.2.2.5.1.5 Beacon Period Count (BPC)
187 6.4.2.2.5.1.6 Station Capability (STACAP)
6.4.2.2.5.1.7 Encryption Key Select (EKS)
6.4.2.2.5.1.8 HOP Count (HOP_CNT)
6.4.2.2.5.1.9 Effective Bit Loading Estimate for Downstream (EBLE_DOWN)
6.4.2.2.5.1.10 Effective Bit Loading Estimate for Upstream (EBLE_UP)
6.4.2.2.5.1.11 Fixed Guard Interval Selection (FGIS)
6.4.2.2.5.2 Start-of-Frame (SOF) fields
188 6.4.2.2.5.2.1 Source Terminal Equipment Identifier (STEI)
6.4.2.2.5.2.2 Destination Terminal Equipment Identifier (DTEI)
6.4.2.2.5.2.3 Traffic Class Identifier (TCID)
6.4.2.2.5.2.4 SNID EXTENSION (SNID_EXT)
189 6.4.2.2.5.2.5 Bit Map SACK Information # 1 (BM-SACK #1)
6.4.2.2.5.2.6 Encryption Key Select (EKS)
6.4.2.2.5.2.7 PHY Block Size (PBSz)
6.4.2.2.5.2.8 Number of Symbols (NumSym)
6.4.2.2.5.2.9 Tone Map Index (TMI_Access)
6.4.2.2.5.2.10 Frame Length (FL)
6.4.2.2.5.2.11 MPDU Count (MPDUCnt)
6.4.2.2.5.2.12 Burst Count (BurstCnt)
6.4.2.2.5.2.13 Bidirectional Burst Flag (BBF)
6.4.2.2.5.2.14 Maximum Reverse Transmission Frame Length (MRTFL)
6.4.2.2.5.2.15 Multicast Flag (MCF)
6.4.2.2.5.2.16 Multi-Network Broadcast Flag (MNBF)
6.4.2.2.5.2.17 Request SACK Retransmission (RSR)
190 6.4.2.2.5.2.18 MAC SAP Type (MST)
6.4.2.2.5.2.19 Management MAC Frame Stream Command (MFSCmdMgmt)
6.4.2.2.5.2.20 Data MAC Frame Stream Command (MFSCmdData)
6.4.2.2.5.2.21 Management MAC Frame Stream Response (MFSRspMgmt)
6.4.2.2.5.2.22 Data MAC Frame Stream Response (MFSRspData)
6.4.2.2.5.2.23 Bit Map SACK Information (BM-SACKI #1 and #2)
6.4.2.2.5.3 Selective Acknowledgment (SACK) fields
191 6.4.2.2.5.3.1 Destination Terminal Equipment Identifier (DTEI)
6.4.2.2.5.3.2 SNID Extension (SNID_EXT)
6.4.2.2.5.3.3 Request Reverse Transmission Flag (RRTF)
192 6.4.2.2.5.3.4 Data MAC Frame Stream Response (MFSRspData)
6.4.2.2.5.3.5 Management MAC Frame Stream Response (MFSRspMgmt)
6.4.2.2.5.3.6 SACK Data (SACKD)
6.4.2.2.5.3.7 Bit Pad (BitPad)
6.4.2.2.5.3.8 Receive Window Size (RxWSz)
6.4.2.2.5.3.9 Request Reverse Transmission Length (RRTL)
6.4.2.2.5.4 Request to Send/Clear to Send (RTS/CTS) fields
193 6.4.2.2.5.4.1 Source Terminal Equipment Identifier (STEI)
6.4.2.2.5.4.2 Destination Terminal Equipment Identifier (DTEI)
6.4.2.2.5.4.3 Traffic Class Identifier (TCID)
6.4.2.2.5.4.4 RTS Flag (RTSF)
6.4.2.2.5.4.5 Multi-Network Broadcast Flag (MNBF)
6.4.2.2.5.4.6 Multicast Flag (MCF)
6.4.2.2.5.4.7 Duration (DUR)
6.4.2.2.5.4.8 SNID Extension (SNID_EXT)
6.4.2.2.5.5 Sound MPDU fields
195 6.4.2.2.5.5.1 Source Terminal Equipment Identifier (STEI)
6.4.2.2.5.5.2 Destination Terminal Equipment Identifier (DTEI)
6.4.2.2.5.5.3 PHY Block Size (PBSz)
6.4.2.2.5.5.4 Sound ACK Flag (SAF)
6.4.2.2.5.5.5 Sound Complete Flag (SCF)
6.4.2.2.5.5.6 Tone Maps Requested (REQ_TM)
196 6.4.2.2.5.5.7 Frame Length (FL)
6.4.2.2.5.5.8 MPDU Count (MPDUCnt)
6.4.2.2.5.5.9 Sound Reason Code
6.4.2.2.5.5.10 Traffic Class Identifier (TCID)
6.4.2.2.5.5.11 SNID Extension (SNID_EXT)
6.4.2.2.5.5.11.1 Additional Tone Maps Requested (ADD_REQ_TM)
6.4.2.2.5.5.11.2 Maximum PBs per symbol (MAX_PB_SYM)
6.4.2.2.5.6 Reverse SOF fields
197 6.4.2.2.5.6.1 Destination Terminal Equipment Identifier (DTEI)
6.4.2.2.5.6.2 SNID Extension (SNID_EXT)
6.4.2.2.5.6.3 Receive Window Size (RxWSz)
6.4.2.2.5.6.4 Request Reverse Transmission Flag (RRTF)
6.4.2.2.5.6.5 Data MAC Frame Stream Response (MFSRspData)
6.4.2.2.5.6.6 Management MAC Frame Stream Response (MFSRspMgmt)
6.4.2.2.5.6.7 SACK Data (SACKD)
6.4.2.2.5.6.8 Request Reverse Transmission Length (RRTL)
198 6.4.2.2.5.6.9 Reverse SOF Frame Length (RSOF_FL)
6.4.2.2.5.6.10 Tone Map Index (TMI_Access)
6.4.2.2.5.6.11 PHY Block Size (PBSz)
6.4.2.2.5.6.12 Number of Symbols (NumSym)
6.4.2.2.5.6.13 Management MAC Frame Stream Command (MFSCmdMgmt)
6.4.2.2.5.6.14 Data MAC Frame Stream Command (MFSCmdData)
6.4.2.2.5.6.15 Frame Control Check Sequence (FCCS)
6.4.2.3 Format of long MPDU payload
199 6.4.2.3.1 MAC frame format for 2-level concatenation
200 6.4.2.3.1.1 MAC Frame Header
6.4.2.3.1.1.1 MAC Frame Type (MFT)
201 6.4.2.3.1.1.2 MAC Frame Length (MFL)
6.4.2.3.1.2 2-Level Concatenation FLAGS (2LFLAGS)
6.4.2.3.1.3 The Arrival Timestamp (ATS)
6.4.2.3.1.4 Confounder (CONFOUNDER)
6.4.2.3.1.5 Original Destination Terminal Equipment Identifier (ODTEI)
6.4.2.3.1.6 Original Source Terminal Equipment Identifier (OSTEI)
6.4.2.3.1.7 Connection Identifier (CID)
6.4.2.3.1.8 Traffic Class Identifier (TCID)
6.4.2.3.1.9 HOP Count (HOP_CNT)
6.4.2.3.1.10 End-to-end Encryption Flag (EE_EF)
202 6.4.2.3.1.11 End-to-end Encryption Key Select (EE_EKS)
6.4.2.3.1.12 End-to-end Encryption Reserved Field (EE_RSVD)
6.4.2.3.1.13 End-to-end Initialization Vector (EE_IV)
6.4.2.3.1.14 Original Destination Address (ODA)
6.4.2.3.1.15 Original Source Address (OSA)
6.4.2.3.1.16 VLAN Tag
6.4.2.3.1.17 The EtherType/LEN (EType/LEN)
6.4.2.3.1.18 Payload
6.4.2.3.1.19 Integrity Check Value
6.4.2.3.2 Management Message format
203 6.4.2.3.2.1 Original Destination Address (ODA)
6.4.2.3.2.2 Original Source Address (OSA)
6.4.2.3.2.3 VLAN Tag
6.4.2.3.2.4 MTYPE
6.4.2.3.2.5 Management Message Version (MMV)
204 6.4.2.3.2.6 Management Message Type (MMTYPE)
6.4.2.3.2.7 Fragment management information
206 6.4.2.3.2.8 Management Message Entry Data (MME)
209 6.4.2.3.2.9 MME PAD
6.4.2.4 Clause intentionally left blank
6.4.2.5 Format of beacon MPDU payload
6.4.2.5.1 Network Identifier (NID)
210 6.4.2.5.2 1901 FFT Hybrid Mode (HM)
6.4.2.5.3 Beacon Type (BT)
6.4.2.5.4 Source Terminal Equipment Identifier (STEI)
6.4.2.5.5 Beacon Management Information (BMI)
6.4.2.5.5.1 Number of Beacon Entries (NBE)
6.4.2.5.5.2 Beacon Entry Header (BEHDR)
211 6.4.2.5.5.3 Beacon Entry Length (BELEN)
6.4.2.5.5.4 Beacon Entry (BENTRY)
6.4.2.5.5.4.1 Change SNID_Ext BENTRY
6.4.2.5.5.4.2 Beacon Period Start Time Offset BENTRY
212 6.4.2.5.5.4.3 MAC Address BENTRY
6.4.2.5.5.4.4 TDMA Schedule BENTRY
6.4.2.5.5.4.5 Backup HE Status BENTRY
6.4.2.5.5.4.6 Next Beacon Schedule BENTRY
6.4.2.5.5.4.7 Stay Awake List BENTRY
6.4.2.5.5.4.8 TDMA Clock Reference BENTRY
213 6.4.2.5.5.4.9 RSN Information Element BENTRY
6.4.2.5.5.4.10 Extended Carriers Support BENTRY
6.4.2.5.5.4.11 PRS Signaling BENTRY
6.4.2.5.5.4.12 Vendor-Specific BENTRY
6.4.2.5.6 Octet Pad (OPAD)
6.4.2.5.7 Beacon Payload Check Sequence (BPCS)
214 6.4.2.6 Format of sound MPDU payload
6.5 FFT management messages
6.5.1 In-home FFT management messages
6.5.1.1 Coexistence (CX) Change Channel message
6.5.1.1.1 Channel field
6.5.1.2 Station—BSS manager (BM) messages
6.5.1.2.1 CC_BM_APPOINT.request
215 6.5.1.2.2 CC_BM_APPOINT.confirm
6.5.1.2.3 CC_BACKUP_APPOINT.request
216 6.5.1.2.4 CC_BACKUP_APPOINT.confirm
6.5.1.2.5 CC_LINK_INFO.request
6.5.1.2.6 CC_LINK_INFO.confirm
217 6.5.1.2.7 CC_LINK_INFO.indication
6.5.1.2.8 CC_LINK_INFO.response
6.5.1.2.9 CC_HANDOVER.request
6.5.1.2.10 CC_HANDOVER.confirm
218 6.5.1.2.11 CC_HANDOVER_INFO.indication
6.5.1.2.12 CC_HANDOVER_INFO.response
219 6.5.1.2.13 CC_DISCOVER_LIST.request
6.5.1.2.14 CC_DISCOVER_LIST.confirm
221 6.5.1.2.15 CC_DISCOVER_LIST.indication
6.5.1.2.16 CC_LINK_NEW.request
222 6.5.1.2.16.1 Initiating MAC Address
6.5.1.2.16.2 Terminating MAC Address
6.5.1.2.16.3 Connection Identifier (CID)
6.5.1.2.16.4 Traffic Specification
6.5.1.2.16.5 Forward Link and Reverse Link Bit Loading Estimates
6.5.1.2.16.5.1 Number of Intervals
6.5.1.2.16.5.2 Interval End Time # 1–N
223 6.5.1.2.16.5.3 Bit Loading Estimate # 1–N
6.5.1.2.17 CC_LINK_NEW.confirm
6.5.1.2.17.1 Result
6.5.1.2.17.2 Proposed TSPEC
6.5.1.2.18 CC_LINK_MOD.request
224 6.5.1.2.19 CC_LINK_MOD.confirm
6.5.1.2.20 CC_LINK_SQZ.request
225 6.5.1.2.21 CC_LINK_SQZ.confirm
6.5.1.2.22 CC_LINK_REL.request
6.5.1.2.23 CC_LINK_REL.indication
226 6.5.1.2.24 CC_DETECT_REPORT.request
227 6.5.1.2.25 CC_DETECT_REPORT.confirm
228 6.5.1.2.26 CC_WHO_RU.request
6.5.1.2.27 CC_WHO_RU.confirm
6.5.1.2.28 CC_ASSOC.request
229 6.5.1.2.28.1 ReqType
6.5.1.2.28.2 NID
6.5.1.2.28.3 BM Capability
6.5.1.2.28.4 Proxy Networking Capability
6.5.1.2.28.5 RSN Information Element
6.5.1.2.29 CC_ASSOC.confirm
230 6.5.1.2.29.1 Result
6.5.1.2.29.2 NID
6.5.1.2.29.3 SNID
6.5.1.2.29.4 STA TEI
6.5.1.2.29.5 Lease Time
6.5.1.2.30 CC_LEAVE.request
231 6.5.1.2.31 CC_LEAVE.confirm
6.5.1.2.32 CC_LEAVE.indication
6.5.1.2.33 CC_LEAVE.response
6.5.1.2.34 CC_SET_TEI_MAP.requests
6.5.1.2.35 CC_SET_TEI_MAP.indication
232 6.5.1.2.35.1 Mode
6.5.1.2.36 CC_RELAY.request
233 6.5.1.2.36.1 FDA
6.5.1.2.36.2 FTEI
6.5.1.2.36.3 LEN
6.5.1.2.36.4 Payload
6.5.1.2.37 CC_RELAY.indication
6.5.1.2.37.1 OSA
234 6.5.1.2.37.2 OTEI
6.5.1.2.37.3 LEN
6.5.1.2.37.4 Payload
6.5.1.2.38 CC_BEACON_RELIABILITY.request
6.5.1.2.39 CC_BEACON_RELIABILITY.confirm
6.5.1.2.39.1 Number of Beacon Periods (NBP)
6.5.1.2.39.2 Number of Missed Beacons (NMB)
235 6.5.1.2.40 CC_ALLOC_MOVE.request
6.5.1.2.41 CC_ALLOC_MOVE.confirm
236 6.5.1.2.42 CC_ACCESS_NEW.request
6.5.1.2.43 CC_ACCESS_NEW.confirm
237 6.5.1.2.44 CC_ACCESS_NEW.indication
238 6.5.1.2.45 CC_ACCESS_NEW.response
6.5.1.2.46 CC_ACCESS_REL.request
239 6.5.1.2.47 CC_ACCESS_REL.confirm
6.5.1.2.48 CC_ACCESS_REL.indication
6.5.1.2.49 CC_ACCESS_REL.response
6.5.1.2.50 CC_DCPPC.indication
240 6.5.1.2.51 CC_DCPPC.response
6.5.1.2.52 CC_HP1_DET.request
6.5.1.2.53 CC_HP1_DET.confirm
6.5.1.2.54 CC_BLE_UPDATE.indication
241 6.5.1.2.55 CC_BCAST_REPEAT.indication
6.5.1.2.56 CC_BCAST_REPEAT.response
6.5.1.2.57 CC_MH_LINK_NEW.request
242 6.5.1.2.57.1 Initiating MAC Address
6.5.1.2.57.2 Terminating MAC Address
6.5.1.2.57.3 Connection Identifier
6.5.1.2.57.4 Original Source TEI (OSTEI)
6.5.1.2.57.5 Original Destination TEI (ODTEI)
6.5.1.2.57.6 Multi-hop Connection Identifier (MH_CID)
6.5.1.2.57.7 Traffic Specification
243 6.5.1.2.57.8 Forward Link and Reverse Link Bit Loading Estimates
6.5.1.2.57.9 Number of Intervals
6.5.1.2.57.10 Interval End Time # 1–N
6.5.1.2.57.11 Bit Loading Estimate # 1–N
6.5.1.2.58 CC_MH_LINK_NEW.confirm
6.5.1.2.59 CC_ISP_DetectionReport.indication
244 6.5.1.2.59.1 ISP State Access (ISPSTA)
6.5.1.2.59.2 ISP State Wavelet (ISPSTW)
6.5.1.2.59.3 ISP State G.hn (ISPSTG)
245 6.5.1.2.59.4 Number of Out-of-Sync Sequences (NumOSYN)
6.5.1.2.59.5 Out-of-Sync Sequence (OSYN_Seq[0] to OSYN_Seq[N-1])
6.5.1.2.59.5.1 ISP Offset (ISPOFST)
6.5.1.2.59.5.2 ISP State Access (ISPSTA)
6.5.1.2.59.5.3 ISP State Wavelet (ISPSTW)
246 6.5.1.2.59.5.4 ISP State G.hn (ISPSTG)
6.5.1.2.60 CC_ISP_StartReSync.request
6.5.1.2.61 CC_ISP_FinishReSync.request
6.5.1.2.62 CC_ISP_ReSyncDetected.indication
6.5.1.2.63 CC_ISP_ReSyncTransmission.request
6.5.1.2.63.1 Number of Resync Signals (NumReSync)
247 6.5.1.3 Proxy BSS manager (PBM) messages
6.5.1.3.1 CP_PROXY_APPOINT.request
6.5.1.3.1.1 ReqType
6.5.1.3.1.2 ReqID
248 6.5.1.3.1.3 GLID
6.5.1.3.1.4 Num HSTA
6.5.1.3.1.5 HSTA SA[1] to HSTA SA[N]
6.5.1.3.1.6 HSTA TEI[1] to HSTA TEI[N]
6.5.1.3.1.7 HSTA State[1] to HSTA State[N]
6.5.1.3.2 CP_PROXY_APPOINT.confirm
6.5.1.3.2.1 ReqID
6.5.1.3.2.2 Result
249 6.5.1.3.3 PH_PROXY_APPOINT.indication
6.5.1.3.3.1 PBM SA
6.5.1.3.3.2 PBM TEI
6.5.1.3.3.3 BM SA
6.5.1.3.3.4 BM TEI
6.5.1.3.3.5 GLID
6.5.1.3.4 CP_PROXY_WAKE.request
6.5.1.4 BM–BM messages
250 6.5.1.4.1 NN_INL.request and NN_INL.confirm
252 6.5.1.4.2 NN_NEW_NET.request
6.5.1.4.3 NN_NEW_NET.confirm
254 6.5.1.4.4 NN_NEW_NET.indication
255 6.5.1.4.5 NN_ADD_ALLOC.request
6.5.1.4.6 NN_ADD_ALLOC.confirm
256 6.5.1.4.7 NN_ADD_ALLOC.indication
6.5.1.4.8 NN_REL_ALLOC.request
257 6.5.1.4.9 NN_REL_ALLOC.confirm
258 6.5.1.4.10 NN_REL_NET.indication
259 6.5.1.5 Station—Station messages
6.5.1.5.1 CM_UNASSOCIATED_STA.indication
6.5.1.5.2 CM_ENCRYPTED_PAYLOAD.indication
260 6.5.1.5.2.1 Payload Encryption Key Select (PEKS)
6.5.1.5.2.2 BSS Status
261 6.5.1.5.2.3 Protocol ID (PID)
6.5.1.5.2.4 Protocol Run Number (PRN)
6.5.1.5.2.5 Protocol Message Number (PMN)
262 6.5.1.5.2.6 Initialization Vector (IV) or Universally Unique Identifier (UUID)
6.5.1.5.2.7 Length (LEN)
6.5.1.5.2.8 Random Filler (RF)
6.5.1.5.2.9 Management Message (MM) or HLE Payload
6.5.1.5.2.10 Cyclic Redundancy Code (CRC)
6.5.1.5.2.11 Protocol ID (PID)
6.5.1.5.2.12 Protocol Run Number (PRN)
6.5.1.5.2.13 Protocol Message Number (PMN)
6.5.1.5.2.14 Padding—Encrypted
6.5.1.5.2.15 RF Length (RFLen—encrypted)
263 6.5.1.5.3 CM_ENCRYPTED_PAYLOAD.response
6.5.1.5.3.1 Result field
6.5.1.5.4 CM_SET_KEY.request
264 6.5.1.5.4.1 Key Type
6.5.1.5.4.2 PID
6.5.1.5.4.3 NID
265 6.5.1.5.4.4 New_EKS
6.5.1.5.4.5 NewKEY
6.5.1.5.5 CM_SET_KEY.confirm
6.5.1.5.6 CM_GET_KEY.request
266 6.5.1.5.6.1 Request Type
6.5.1.5.6.2 Requested Key Type
6.5.1.5.6.3 NID
6.5.1.5.7 CM_GET_KEY.confirm
267 6.5.1.5.7.1 Requested Key Type
6.5.1.5.8 CM_SC_JOIN.request
6.5.1.5.9 CM_SC_JOIN.confirm
268 6.5.1.5.10 CM_CHAN_EST.indication
270 6.5.1.5.10.1 MaxFL
271 6.5.1.5.10.2 RIFS
6.5.1.5.10.3 RIFS_TwoSym
6.5.1.5.10.4 RIFS_G2Sym
6.5.1.5.10.5 FEC Type/Code Rate (FECTYPE)
6.5.1.5.10.6 Guard Interval Length (GIL)
272 6.5.1.5.10.7 Carrier Bit Loading Data Encoding (CBD_ENC)
6.5.1.5.10.8 Carrier Bit Loading Data (CBD)
6.5.1.5.10.8.1 Binary Encoding (CBD_ENC = 0x00)
6.5.1.5.10.8.2 Run Length Encoding (CBD_ENC = 0x01)
273 6.5.1.5.10.8.3 Alternative Run Length Encoding (CBD_ENC = 0x02)
274 6.5.1.5.11 CM_TM_UPDATE.indication
276 6.5.1.5.12 CM_AMP_MAP.request
6.5.1.5.13 CM_AMP_MAP.confirm
277 6.5.1.5.14 CM_BRG_INFO.request
6.5.1.5.15 CM_BRG_INFO.confirm
6.5.1.5.15.1 Bridge TEI (BTEI)
6.5.1.5.15.2 Number of Bridge Destination Addresses (NBDA)
278 6.5.1.5.15.3 Bridged Destination Address [i] (BDA[i])
6.5.1.5.16 CM_CONN_NEW.request
6.5.1.5.16.1 Traffic Specification (TSPEC)
284 6.5.1.5.16.1.1 Connection Descriptor (CDESC)
285 6.5.1.5.16.1.2 Vendor-specific QoS and MAC parameters
6.5.1.5.16.1.3 Ordering of fields within the TSPEC
6.5.1.5.16.1.4 Surplus bandwidth
286 6.5.1.5.16.1.5 Minimum set of QoS and MAC parameters
6.5.1.5.16.1.6 TSPEC reconfigurability
6.5.1.5.17 CM_CONN_NEW.confirm
287 6.5.1.5.18 CM_CONN_REL.indication
6.5.1.5.19 CM_CONN_REL.response
288 6.5.1.5.20 CM_CONN_MOD.request
6.5.1.5.21 CM_CONN_MOD.confirm
6.5.1.5.22 CM_CONN_INFO.request
289 6.5.1.5.23 CM_CONN_INFO.confirm
290 6.5.1.5.24 CM_STA_CAP.request
6.5.1.5.25 CM_STA_CAP.confirm
291 6.5.1.5.26 CM_NW_INFO.request
6.5.1.5.27 CM_NW_INFO.confirm
292 6.5.1.5.28 CM_GET_BEACON.request
6.5.1.5.29 CM_GET_BEACON.confirm
6.5.1.5.30 CM_HFID.request
293 6.5.1.5.31 CM_HFID.confirm
6.5.1.5.32 CM_MME_ERROR.indication
294 6.5.1.5.33 CM_NW_STATS.request
6.5.1.5.34 CM_NW_STATS.confirm
6.5.1.5.35 CM_LINK_STATS.request
295 6.5.1.5.36 CM_LINK_STATS.confirm
297 6.5.1.5.37 CM_ROUTE_INFO.request
298 6.5.1.5.38 CM_ROUTE_INFO.confirm
6.5.1.5.38.1 Route data rate (RDR[i])
6.5.1.5.39 CM_ROUTE_INFO.indication
299 6.5.1.5.40 CM_UNREACHABLE.indication
6.5.1.5.40.1 Unreachable Timestamp (UnrchTS)
6.5.1.5.41 CM_MH_CONN_NEW.request
300 6.5.1.5.41.1 Original source TEI (OSTEI)
6.5.1.5.41.2 Original destination TEI (ODTEI)
6.5.1.5.41.3 Multi-hop Connection Identifier (MH_CID)
6.5.1.5.41.4 Connection Identifier (CID)
6.5.1.5.41.5 TSPEC
6.5.1.5.42 CM_MH_CONN_NEW.confirm
6.5.1.5.43 CM_EXTENDEDTONEMASK.request
301 6.5.1.5.44 CM_EXTENDEDTONEMASK.confirm
302 6.5.1.6 Manufacturer-specific messages
6.5.1.7 Vendor-specific messages
6.5.2 Access system FFT management message formats
6.5.2.1 Network configuration
6.5.2.1.1 NC_ASSOC.request
303 6.5.2.1.1.1 ReqType
6.5.2.1.1.2 NID/BSSID
6.5.2.1.1.3 HE Capability/Activity
6.5.2.1.1.4 Repeater Capability/Activity
304 6.5.2.1.1.5 NTU Capability
6.5.2.1.1.6 RSN Information Element
6.5.2.1.2 NC_ASSOC.confirm
6.5.2.1.2.1 Result
6.5.2.1.2.2 NID/BSSID
305 6.5.2.1.2.3 SNID_ext
6.5.2.1.2.4 STA TEI
6.5.2.1.2.5 Lease Time
6.5.2.1.3 NC_LEAVE.request
6.5.2.1.4 NC_LEAVE.confirm
6.5.2.1.5 NC_LEAVE.indication
306 6.5.2.1.6 NC_LEAVE.response
6.5.2.1.7 NC_MAC_TEI_MAP.request
6.5.2.1.8 NC_MAC_TEI_MAP.confirm
6.5.2.1.8.1 RESULT
307 6.5.2.1.8.2 MAC
6.5.2.1.8.3 TEI
6.5.2.1.8.4 SNID_ext
6.5.2.1.9 HE Search messages
6.5.2.1.9.1 HE Search Request message
6.5.2.1.9.1.1 BSS Name field
6.5.2.1.9.2 HE Search Response message
6.5.2.1.9.2.1 BSSID/NID field
308 6.5.2.1.9.2.2 BSS Name/HFID field
6.5.2.2 Connection messages
6.5.2.2.1 CN_CONN_NEW.request
6.5.2.2.2 CN_CONN_NEW.confirm
6.5.2.2.3 CN_CONN_NEW.indication
309 6.5.2.2.4 CN_CONN_NEW.response
6.5.2.2.5 CN_TDMA_ALLOC.request
311 6.5.2.2.6 CN_TDMA_ALLOC.confirm
6.5.2.2.7 CN_ALLOC_ERROR.indication
6.5.2.2.8 CN_CONN_MOD.request
6.5.2.2.9 CN_CONN_MOD.confirm
312 6.5.2.2.10 CN_CONN_REL.request
6.5.2.2.11 CN_CONN_REL.confirm
6.5.2.2.12 CN_TDMA_SCH.request
6.5.2.2.13 CN_TDMA_SCH.confirm
6.5.2.2.14 CN_TDMA_SCH.indication
313 6.5.2.2.15 CN_ALLOC_MOD.indication
6.5.2.2.16 CN_ALLOC_MOD.response
6.5.2.2.17 CN_CSMA_GROUP.indication
314 6.5.2.2.18 CN_CSMA_GROUP.response
6.5.2.3 Repeating and routing messages
6.5.2.3.1 RR_BRG_INFO.request
6.5.2.3.2 RR_BRG_INFO.confirm
315 6.5.2.3.2.1 Bridge TEI (BTEI)
6.5.2.3.2.2 Number of Bridge Destination Addresses (NBDA)
6.5.2.3.2.3 Bridged Destination Address [i] (BDA[i])
6.5.2.3.2.4 Bridged Destination Port Identifier [i] (BDPID[i])
6.5.2.3.3 RR_ROUTE_REFRESH.request
6.5.2.3.4 RR_ROUTE_REFRESH.confirm
6.5.2.3.5 RR_ROUTE_UPDATE.request
316 6.5.2.3.6 RR_ROUTE_UPDATE.confirm
6.5.2.3.7 RR_DV_ROUTE_UPDATE.indication
6.5.2.3.7.1 NUM_ENTRIES
317 6.5.2.3.7.2 TEI i
6.5.2.3.7.3 EBLE i
6.5.2.3.7.4 HOP_CNT i
6.5.2.3.8 RR_DV_ROUTE_UPDATE.response
6.5.2.3.9 RR_DV_ROUTE_UPDATE.request
6.5.2.3.10 RR_DV_ROUTE_UPDATE.confirm
6.5.2.3.10.1 NUM_ENTRIES
6.5.2.3.10.2 TEI i
318 6.5.2.3.10.3 EBLE i
6.5.2.3.10.4 HOP_CNT i
6.5.2.3.10.5 RR_LOOP_DIAG.request
6.5.2.3.11 RR_LOOP_DIAG.confirm
319 6.5.2.3.12 RR_BASIC_RTG_TABLE.request
6.5.2.3.13 RR_BASIC_RTG_TABLE.confirm
6.5.2.3.13.1 EBLE_UP
6.5.2.3.13.2 EBLE_DOWN
320 6.5.2.3.13.3 HOP_CNT
6.5.2.3.13.4 PH TEI
6.5.2.3.13.5 NUM_STAS
6.5.2.3.13.6 TEI i
6.5.2.3.14 RR_DV_RTG_TABLE.request
6.5.2.3.15 RR_DV_RTG_TABLE.confirm
6.5.2.3.15.1 NUM_ENTRIES
321 6.5.2.3.15.2 TEI i
6.5.2.3.15.3 EBLE i
6.5.2.3.15.4 HOP_CNT i
6.5.2.3.15.5 NH TEI n
6.5.2.3.16 GE_GET_PFP_LIST.request
6.5.2.3.17 GE_GET_PFP_LIST.confirm
322 6.5.2.3.18 GE_ADD_PFP.request
323 6.5.2.3.19 GE_ADD_PFP.confirm
6.5.2.3.20 GE_REMOVE_PFP.request
6.5.2.3.21 GE_REMOVE_PFP.confirm
6.5.2.3.22 GE_GET_PORT_PFP.request
6.5.2.3.23 GE_GET_PORT_PFP.confirm
324 6.5.2.3.24 GE_SET_PORT_PFP.request
6.5.2.3.25 GE_SET_PORT_PFP.confirm
6.5.2.3.26 GE_VLAN_SET_VLAN_PORT.request
325 6.5.2.3.27 GE_VLAN_SET_VLAN_PORT.confirm
6.5.2.3.28 GE_VLAN_ADD_VLAN.request
6.5.2.3.29 GE_VLAN_ADD_VLAN.confirm
326 6.5.2.3.30 GE_VLAN_REMOVE_VLAN.request
6.5.2.3.31 GE_VLAN_REMOVE_VLAN.confirm
6.5.2.3.32 GE_VLAN_PORTS_STATUS.request
6.5.2.3.33 GE_VLAN_PORTS_STATUS.confirm
327 6.5.2.3.34 GE_VLAN_PORT_VLAN_IDS.request
6.5.2.3.35 GE_VLAN_PORT_VLAN_IDS.confirm
328 6.5.2.4 General messages
6.5.2.4.1 GE_STA_CAP.request
6.5.2.4.2 GE_STA_CAP.confirm
329 6.5.2.4.3 GE_DISCOVER_LIST.request
6.5.2.4.4 GE_DISCOVER_LIST.confirm
331 6.5.2.4.5 GE_GET_SERVICE_SPEC.request
6.5.2.4.6 GE_GET_SERVICE_SPEC.confirm
332 6.5.2.4.7 GE_SET_SERVICE_SPEC.request
6.5.2.4.8 GE_SET_SERVICE_SPEC.confirm
333 6.5.2.4.9 GE_Name/HFID.request
6.5.2.4.10 GE_Name/HFID.confirm
6.5.2.4.11 GE_GET_IP_PARAMS.request
6.5.2.4.12 GE_GET_IP_PARAMS.confirm
334 6.5.2.4.13 GE_SET_IP_PARAMS.request
6.5.2.4.14 GE_SET_IP_PARAMS.confirm
6.5.2.4.15 GE_GET_SW_MGT_PARAMS.request
6.5.2.4.16 GE_GET_SW_MGT_PARAMS.confirm
335 6.5.2.4.17 GE_SET_SW_MGT_PARAMS.request
6.5.2.4.18 GE_SET_SW_MGT_PARAMS.confirm
336 6.5.2.4.19 GE_AIFS_UPDATE.request
6.5.2.4.20 GE_AIFS_UPDATE.confirm
6.5.2.4.21 GE_LINECYCLE_ANNOUNCEMENT.indication
337 6.5.2.4.22 GE_SLEEP_ANNOUNCEMENT.indication
6.5.2.4.23 GE_ARQ_WFC_UPDATE.request
6.5.2.4.24 GE_ARQ_WFC_UPDATE.confirm
338 6.5.2.4.25 GE_ARQ_WFC_UPDATE.indication
6.5.2.4.25.1 ARQ MODE FLAG
6.5.2.4.25.2 STOP RESUME FLAG
6.5.2.4.25.3 PDU SEQUENCE NUMBER
6.5.2.4.26 GE_SET_TONE_MASK.request
6.5.2.4.27 GE_SET_TONE_MASK.confirm
339 6.5.2.5 CX Change Channel message
6.5.2.5.1 Channel field
6.5.2.6 Network configuration MMEs
6.5.2.6.1 NC_ENCRYPTED_PAYLOAD.indication
340 6.5.2.6.1.1 Payload Encryption Key Select (PEKS)
341 6.5.2.6.1.2 Protocol ID (PID)
6.5.2.6.1.3 Protocol Run Number (PRN)
6.5.2.6.1.4 Protocol Message Number (PMN)
6.5.2.6.1.5 Initialization Vector (IV) or Universally Unique Identifier (UUID)
6.5.2.6.1.6 Length (LEN)
6.5.2.6.1.7 Random Filler (RF)
342 6.5.2.6.1.8 Management Message (MM) or HLE Payload/EAPOL Message
6.5.2.6.1.9 Cyclic Redundancy Code (CRC)
6.5.2.6.1.10 Protocol ID (PID Encrypted)
6.5.2.6.1.11 Protocol Run Number (PRN Encrypted)
6.5.2.6.1.12 Protocol Message Number (PMN Encrypted)
6.5.2.6.1.13 Padding Encrypted
6.5.2.6.1.14 RF length (RFLen Encrypted)
6.5.2.6.2 NC_ENCRYPTED_PAYLOAD.response
343 6.5.2.6.2.1 Result
6.5.2.6.3 NC_AUTHRZ.request
6.5.2.6.3.1 NID
6.5.2.6.3.2 MAC
6.5.2.6.3.3 MME
344 6.5.2.6.4 NC_AUTHRZ.confirm
6.5.2.6.5 NC_SET_KEY.request
345 6.5.2.6.5.1 Key Type
6.5.2.6.5.2 NID
6.5.2.6.5.3 MAC
346 6.5.2.6.5.4 New_EKS
6.5.2.6.5.5 CTR
6.5.2.6.6 NC_SET_KEY.confirm
6.5.2.6.7 NC_GET_KEY.request
347 6.5.2.6.7.1 Request Type
6.5.2.6.7.2 Requested Key Type
6.5.2.6.7.3 NID
6.5.2.6.8 NC_GET_KEY.confirm
6.5.2.6.8.1 Requested Key Type
348 6.5.2.6.9 NC_EE_AUTHRZ.indication
6.5.2.6.9.1 NID
6.5.2.6.9.2 MAC1
6.5.2.6.9.3 MAC2
6.5.2.6.9.4 STA1 Nonce
6.5.2.6.9.5 STA2 Nonce
349 6.5.2.6.9.6 MME
6.5.2.6.10 NC_EEK_ERROR.indication
6.5.2.7 Connection management MMEs
6.5.2.7.1 CN_CSMA_PRM.indication
350 6.5.2.7.2 CN_CSMA_PRM.response
6.5.2.8 General messages
6.5.2.8.1 GE_CHAN_EST.indication
352 6.5.2.8.1.1 MaxFL
6.5.2.8.1.2 RIFS
353 6.5.2.8.1.3 RIFS_TwoSym
6.5.2.8.1.4 RIFS_G2Sym
6.5.2.8.1.5 FEC Type/Code Rate (FECTYPE)
6.5.2.8.1.6 Guard Interval Length (GIL)
354 6.5.2.8.1.7 Carrier Bit Loading Data Encoding (CBD_ENC)
6.5.2.8.1.8 Carrier Bit Loading Data (CBD)
6.5.2.8.1.8.1 Binary Encoding (CBD_ENC = 0x00)
6.5.2.8.1.8.2 Run Length Encoding (CBD_ENC = 0x01)
355 6.5.2.8.1.8.3 Alternative Run Length Encoding (CBD_ENC = 0x02)
356 6.5.2.8.2 GE_TM_UPDATE.indication
358 6.5.2.8.3 GE_AMP_MAP.request
6.5.2.8.4 GE_AMP_MAP.confirm
359 6.5.2.8.5 GE_GET_BEACON.request
6.5.2.8.6 GE_GET_BEACON.confirm
6.5.2.8.7 GE_BRG_INFO.request
6.5.2.8.8 GE_BRG_INFO.confirm
360 6.5.2.8.8.1 Bridge TEI (BTEI)
6.5.2.8.8.2 Number of Bridge Destination Addresses (NBDA)
6.5.2.8.8.3 Bridged Destination Address [i] (BDA[i])
6.5.2.8.9 GE_CHANGE_SW_VERSION.request
6.5.2.8.10 GE_CHANGE_SW_VERSION.confirm
6.5.2.8.11 GE_CHAN_USE.request
361 6.5.2.8.12 GE_CHAN_USE.confirm
6.5.2.8.13 GE_LINK_STATS.request
6.5.2.8.14 GE_LINK_STATS.confirm
362 6.5.2.8.15 GE_XMIT_TEST_MODE.request
363 6.5.2.8.16 GE_XMIT_TEST_MODE.confirm
6.5.2.8.17 GE_XMIT_TEST_MODE.indication
6.5.2.8.18 GE_COEX_ALLOC.request
6.5.2.8.18.1 Allocation Start Time (AST)
6.5.2.8.18.2 Allocation End Time (AET)
6.5.2.8.19 GE_COEX_ALLOC.confirm
364 6.5.2.8.20 GE_HE_STA_POW_SAVE.request
6.5.2.8.21 GE_HE_STA_POW_SAVE.confirm
6.5.2.8.22 GE_STA_STA_POW_SAVE.indication
6.5.2.8.23 GE_STA_STA_POW_SAVE.response
6.5.2.8.24 GE_CPE_POW_SAVE.request
365 6.5.2.8.25 GE_CPE_POW_SAVE.confirm
6.5.2.8.26 GE_STA_WAKE_UP.request
6.5.2.8.27 GE_ISP_MODE.indication
6.5.2.8.27.1 ISP Mode (ISPMODE)
366 6.5.2.8.27.2 Beacon period count (BPC)
6.5.2.8.27.3 ISP Offset (ISPOFST)
6.5.2.8.28 GE_ISP_STATUS.indication
6.5.2.8.28.1 ISP state wavelet (ISPSTW)
6.5.2.8.28.2 ISP state OFDM (ISPSTO)
6.5.2.8.28.3 ISP State G.hn (ISPSTG)
367 6.5.2.8.28.4 Number of Out-of-Sync Sequences (NumOSYN)
6.5.2.8.28.5 Out-of-Sync Sequence (OSYN_Seq[0] to OSYN_Seq[N-1])
6.5.2.8.28.5.1 ISP Offset (ISPOFST)
6.5.2.8.28.5.2 ISP State Access (ISPSTA)
6.5.2.8.28.5.3 ISP State Wavelet (ISPSTW)
368 6.5.2.8.28.5.4 ISP State G.hn (ISPSTG)
6.5.2.8.29 GE_STA_WAKE_UP.confirm
6.5.2.8.30 GE_EXTENDEDTONEMASK.request
369 6.5.2.8.31 GE_EXTENDEDTONEMASK.confirm
6.5.2.9 Manufacturer-specific messages
370 6.5.2.10 Vendor-specific messages
6.6 In-home and access Single Channel Wavelet MPDU formats
6.6.1 General SCW MPDU format
371 6.6.1.1 Frame Control field
6.6.1.1.1 Address fields
6.6.1.1.1.1 Address representation
6.6.1.1.1.2 Address designation
6.6.1.1.1.3 BSS ID field
372 6.6.1.1.1.4 Destination Address (DA) field
6.6.1.1.1.5 Source Address field
6.6.1.1.2 SCW Frame Type (FT) field
6.6.1.1.3 Station ID field
6.6.1.1.4 Robust Control field
373 6.6.1.1.5 Variant field (VF)
6.6.1.1.6 Frame Control Check Sequence (FCCS) field
6.6.1.2 Frame Body field
6.6.1.2.1 Subframe Header field
374 6.6.1.2.1.1 Initialization Vector (IV) field
6.6.1.2.1.2 Timestamp field
6.6.1.2.1.3 Length field
6.6.1.2.1.4 Data Body Structure Information (DBSI) field
6.6.1.2.1.5 Sequence Number field
6.6.1.2.1.6 Subframe Number field
375 6.6.1.2.1.7 Receive Sequence Control (RSC) field
6.6.1.2.1.8 Padding Flag field
6.6.1.2.1.9 Extension Flag field
6.6.1.2.1.10 Network Key Index (NKI) field
6.6.1.2.1.11 Subframe Header Check Sequence (SHCS) field
6.6.1.2.2 Subframe Body field
6.6.1.2.2.1 Data Body field
376 6.6.1.2.2.2 Encryption Padding (E-PAD) field
6.6.1.2.2.3 Integrity Check Value (ICV) field
6.6.1.2.2.4 Subframe Body Check Sequence (SBCS) field
6.6.1.2.3 C-Mark field format
6.6.1.3 Padding field
6.6.2 Concatenation of subframes
6.6.3 Concatenation formats inside subframes
6.6.3.1 Extended Ethernet frame concatenation format
377 6.6.3.1.1 MAC Common Unit Length
6.6.3.1.2 Original Destination Address (ODA)
6.6.3.1.3 Original Source Address (OSA)
6.6.3.1.4 VLAN Tag
6.6.3.1.5 EtherType/LEN (Type/LEN)
6.6.3.1.6 User Data
6.6.3.1.7 Padding
6.6.3.2 MSDU concatenation format
378 6.6.4 SCW Beacon frame format
6.6.4.1 Variant field
379 6.6.4.2 Subframe Header
380 6.6.4.3 Data Body
6.6.4.3.1 Schedule Information Block
381 6.6.4.3.2 Extended Information Block (EIB)
382 6.6.4.4 Extended Information Blocks
6.6.4.4.1 DVTP Information type
6.6.4.4.2 Current NEK type
383 6.6.4.4.3 ISP Information type
6.6.4.4.3.1 Basic Information (ISP Info ID = 0)
384 6.6.4.4.3.2 Synchronization Information (ISP Info ID = 1)
385 6.6.4.4.3.3 Search Information (ISP Info ID = 2)
6.6.4.4.3.4 Coexistence PHY List Information (ISP Info ID = 3)
387 6.6.4.4.4 RSN Information type
6.6.4.4.5 Camellia Information type
6.6.4.4.6 End of Blocks type
388 6.6.5 SCW ACK frame format
6.6.5.1 Variant field
389 6.6.6 SCW Request Channel Estimation (RCE) frame format
6.6.6.1 Variant field
390 6.6.6.2 Evaluation sequence
6.6.7 SCW Channel Estimation Response (CER) frame format
6.6.7.1 Variant field
391 6.6.7.2 Subframe Header field
6.6.7.3 Data Body field
392 6.6.8 SCW Stream End frame format
393 6.6.8.1 Variant field
6.6.9 SCW Data MPDU format
6.6.9.1 Variant field
394 6.6.9.2 Subframe format
6.6.9.2.1 Single MSDU subframe
6.6.9.2.1.1 Subframe Header
395 6.6.9.2.1.2 Data Body
6.6.9.2.2 Concatenated MSDU frames
6.6.9.2.2.1 Subframe Header
396 6.6.9.2.2.2 Data Body
6.6.9.2.3 Subframe for fragmented MSDU
6.6.9.2.3.1 Subframe Header
397 6.6.9.2.3.2 Data Body
398 6.6.10 SCW RTS/CTS frame format
6.6.10.1 Variant field
399 6.6.11 SCW Management frames
6.6.11.1 SCW Management frame format
6.6.11.1.1 Variant field
400 6.6.11.1.2 Data Body
401 6.6.11.2 Bandwidth reservation
6.6.11.2.1 Bandwidth Reservation Request
6.6.11.2.1.1 SID/LID field
6.6.11.2.1.2 NEW_REQ field
402 6.6.11.2.1.3 Acknowledgment field
6.6.11.2.1.4 FEC field
6.6.11.2.1.5 Symbol bit field
6.6.11.2.1.6 Source Address field
6.6.11.2.1.7 Destination Address field
6.6.11.2.1.8 TSPEC field
6.6.11.2.1.8.1 MSInfo field
403 6.6.11.2.1.8.2 Other subfields
6.6.11.2.2 Bandwidth Reservation Response
404 6.6.11.2.2.1 Stream ID/Link ID field
6.6.11.2.2.2 NEW_REQ field
6.6.11.2.2.3 Res field
405 6.6.11.2.2.4 Assigned Link ID field
6.6.11.2.2.5 TSPEC_TYPE field
6.6.11.2.2.6 TSPEC_VALUE field
6.6.11.2.3 Bandwidth Release Request
406 6.6.11.2.3.1 Link ID field
6.6.11.2.3.2 Aging Flag field
6.6.11.2.4 Bandwidth Release Response
6.6.11.2.4.1 Link ID field
6.6.11.2.4.2 Result field
407 6.6.11.2.5 Schedule Aging Notice
6.6.11.2.5.1 LID field
6.6.11.2.6 Schedule Aging Notice Response
6.6.11.2.6.1 Link ID field
408 6.6.11.2.6.2 Result field
6.6.11.3 Authentication
6.6.11.3.1 Authentication Request
6.6.11.3.1.1 QCFLAG field
6.6.11.3.1.2 DNKC field
6.6.11.3.1.3 CE Mode field
6.6.11.3.1.4 EIBs field
409 6.6.11.3.2 Authentication Response
6.6.11.3.2.1 Result field
6.6.11.3.2.2 PERIOD field
410 6.6.11.3.2.3 Network Key Index field
6.6.11.3.2.4 Key Length field
6.6.11.3.2.5 Network Key field
6.6.11.3.2.6 EIBs field
6.6.11.3.3 Challenge Text Request
6.6.11.3.3.1 Challenge Text Length field
6.6.11.3.3.2 Challenge Text field
6.6.11.3.4 Challenge Text Response
411 6.6.11.3.4.1 Encrypted Text Length field
6.6.11.3.4.2 Encrypted Text field
6.6.11.3.5 Disassociation frame format
6.6.11.3.5.1 ReasonCode field
412 6.6.11.3.6 Association Request frame format
413 6.6.11.3.7 Association Response frame format
6.6.11.3.8 Reassociation Request frame format
6.6.11.3.9 Reassociation Response Frame Body
6.6.11.3.9.1 StatusCode field
415 6.6.11.3.9.2 Association ID field
6.6.11.3.9.3 Timestamp field
6.6.11.3.10 Deauthentication Request
6.6.11.3.11 Deauthentication Notice
416 6.6.11.3.11.1 MAC Address field
6.6.11.3.12 Deauthentication Notice Response
6.6.11.4 Channel estimation
6.6.11.4.1 Channel Estimation Region Request
6.6.11.4.1.1 MAC Address field
6.6.11.4.2 Channel Estimation Region Response
6.6.11.4.2.1 RES field
417 6.6.11.4.2.2 CEID field
6.6.11.4.2.3 Regions field
6.6.11.4.2.4 CeLength field
6.6.11.4.3 Channel Estimation Region Release
6.6.11.4.4 Invalid TMI Notification
6.6.11.4.4.1 Valid TMI field
418 6.6.11.4.4.2 Invalid TMI Number field
6.6.11.4.4.3 Invalid TMI field
6.6.11.5 Probe
6.6.11.5.1 Probe Request
6.6.11.5.1.1 BSS Name field
6.6.11.5.1.2 RSN Information Element
6.6.11.5.1.3 Request Information Elements
6.6.11.5.2 Probe Response
419 6.6.11.5.2.1 BSSID field
6.6.11.5.2.2 BSS Name field
6.6.11.5.2.3 RSN Information Element field
6.6.11.6 NEK update
6.6.11.6.1 NEK Distribution Indication
420 6.6.11.6.1.1 NKI
6.6.11.6.1.2 KLEN
6.6.11.6.1.3 SEQ
6.6.11.6.1.4 NEK
6.6.11.6.2 NEK Distribution Confirmation
6.6.11.6.2.1 NKI field
6.6.11.6.2.2 Result field
6.6.11.7 EAPOL
421 6.6.11.7.1 EAPOL field
6.6.11.8 ISP Information Indication
6.6.11.8.1 Detection Report Indication (ISP InformationType ID = 0)
422 6.6.11.8.1.1 Transaction ID field
6.6.11.8.1.2 Access State field
6.6.11.8.1.3 IH-O State field
6.6.11.8.1.4 IH-G State field
6.6.11.8.1.5 IH-W State field
6.6.11.8.1.6 Flags field
423 6.6.11.8.1.7 Number of Out-of-sync Sequences field
6.6.11.8.1.8 Out-of-sync Sequences List field
424 6.6.11.8.2 Start Resync frame (ISP Message ID = 1)
6.6.11.8.2.1 Transaction ID field
6.6.11.8.2.2 ZeroX Counter field and SP Counter field
425 6.6.11.8.3 Resync Finished frame (ISP Message ID = 2)
6.6.11.8.3.1 Transaction ID field
6.6.11.8.3.2 Fields for the coexistence information
426 6.6.11.8.3.3 Fields for the resync signals transmission
6.6.11.8.4 Resync Detected frame (ISP Message ID = 3)
427 6.6.11.8.5 Resync Transmission Request frame (ISP Message ID = 4)
6.6.11.8.6 Network Status Request frame (ISP Message ID = 5)
6.6.11.8.6.1 Transaction ID field
6.6.11.8.7 Change Frequency frame (ISP Message ID = 6)
428 6.6.11.8.7.1 Frequency field
6.6.11.8.7.2 ZeroX Counter field and SP Counter field
6.6.11.9 PHY Capabilities
6.6.11.9.1 PHY Capabilities Request
6.6.11.9.2 PHY Capabilities Response
429 6.6.11.9.2.1 1024_CARRIERS
6.6.11.9.2.2 2048_CARRIERS
6.6.11.9.2.3 16K_SYMBOL
430 6.6.11.9.2.4 32K_SYMBOL
6.6.11.9.2.5 BANDPASS
6.6.11.9.2.6 START_FREQUENCY_X
6.6.11.9.2.7 END_FREQUENCY_X
6.6.11.9.3 PHY Mode Request
431 6.6.11.10 Vendor-Specific Management frame
6.7 Flexible Channel Wavelet MPDU formats
6.7.1 FCW MPDU format
432 6.7.1.1 Frame Control field
6.7.1.1.1 Address fields
6.7.1.1.1.1 Address representation
6.7.1.1.1.2 Address designation
6.7.1.1.1.3 BSS ID field
6.7.1.1.1.4 Destination Address (DA) field
6.7.1.1.1.5 Source Address field
6.7.1.1.2 FCW Frame Type (FT) field
433 6.7.1.1.3 Station ID field
6.7.1.1.4 Robust Control field
6.7.1.1.5 Variant field (VF)
6.7.1.1.6 Frame Control Check Sequence (FCCS) field
6.7.1.1.7 Frame Info field
6.7.1.2 Frame Body field
6.7.1.3 Padding field
6.7.2 Concatenation of subframes
434 6.7.3 Concatenation formats inside subframes
6.7.4 FCW Beacon frame format
6.7.4.1 Variant field
6.7.4.2 Subframe Header
6.7.4.3 Data Body
6.7.4.4 Extended Information Blocks
6.7.5 FCW ACK frame format
435 6.7.5.1 Variant field
6.7.6 FCW Request Channel Estimation (RCE) frame format
6.7.6.1 Variant field
6.7.6.2 Evaluation sequence
6.7.7 FCW Channel Estimation Response (CER) frame format
6.7.7.1 Variant field
6.7.7.2 Subframe Header field
436 6.7.7.3 Data Body field
6.7.8 FCW Stream End frame format
6.7.8.1 Variant field
6.7.9 FCW Data MPDU format
6.7.9.1 Variant field
437 6.7.9.2 Subframe format
6.7.10 FCW RTS/CTS frame format
6.7.10.1 Variant field
6.7.11 FCW Management frames
6.7.11.1 FCW Management frame format
6.7.11.1.1 Variant field
438 6.7.11.2 Bandwidth reservation
6.7.11.3 Authentication
6.7.11.4 Channel estimation
6.7.11.5 Probe
6.7.11.6 NEK update
6.7.11.7 EAPOL
6.7.11.8 ISP Information Indication
6.7.11.9 PHY Capabilities
6.7.11.10 Vendor-Specific Management frame
7 Security
7.1 Framework
439 7.1.1 Security methods
7.2 Device-based security network (DSN) data confidentiality protocol
7.2.1 DSNA cipher block chaining (CBC) mode overview
440 7.2.2 PHY block body encryption bit order
7.2.3 Initialization vector generation and bit order
7.2.3.1.1 IV fields from Start-of-Frame delimiter (IV_SOF)
7.2.3.1.2 PB Count (PBC)
7.2.3.1.3 IV fields from PHY Block Header (IV_PBH)
7.2.4 PHY block body encryption key bit order
441 7.2.5 DSNA CBC Mode frame format
442 7.2.6 Integrity check value (ICV)
7.2.7 DSNA CBC mode encryption process
7.2.8 DSNA CBC mode decryption process
443 7.3 Pairwise security network (PSN) data confidentiality protocol
7.3.1 PSN association (PSNA) CBC overview
7.3.2 Data Body encryption bit order
7.3.3 Initialization vector generation and bit order
444 7.3.4 PSNA CBC subframe format
7.3.5 PSNA CBC mode cryptographic encapsulation
445 7.3.5.1 Construct nonce
7.3.5.2 Calculate CRC-16
7.3.5.3 AES-CBC encryption
446 7.3.5.4 Calculate CRC-32
7.3.6 PSNA CBC mode de-encapsulation
447 7.3.6.1 CRC-32 check
7.3.6.2 AES-CBC decryption
7.3.6.3 Integrity check
7.3.6.4 Replay check
448 7.4 Robust security network (RSN)
7.4.1 Overview
7.4.2 RSNA equipment and RSNA capabilities
7.4.3 RSNA establishment
449 7.4.3.1 Infrastructure functional model overview
7.4.3.1.1 AKM operations with AS
450 7.4.3.1.2 Operations with PSK
451 7.4.3.1.3 Disassociation
452 7.4.3.2 Authenticator-to-AS protocol
7.4.3.3 PMKSA caching
7.4.3.4 RSN information element
453 7.4.3.4.1 Cipher suites
454 7.4.3.4.2 AKM suites
7.4.3.4.3 RSN capabilities
455 7.4.3.4.4 PMKID
7.4.4 RSNA PeerKey support
456 7.4.5 RSNA assumptions and constraints
457 7.5 RSNA data confidentiality protocol
7.5.1 Overview
7.5.2 CTR with CBC-MAC Protocol (CCMP)
7.5.2.1 CCMP overview
7.5.2.2 CCMP MPDU format
458 7.5.2.3 CCMP cryptographic encapsulation
459 7.5.2.3.1 PN processing
7.5.2.3.2 Construct AAD
460 7.5.2.3.3 Construct CCM nonce
7.5.2.3.4 Construct CCMP header
7.5.2.3.5 CCM originator processing
461 7.5.2.4 CCMP decapsulation
462 7.5.2.4.1 CCM recipient processing
7.5.2.4.2 Decrypted CCMP MPDU
7.5.2.4.3 PN and replay detection
463 7.6 RSNA security association management
7.6.1 Security associations
7.6.1.1 Security association definitions
7.6.1.1.1 PMKSA
7.6.1.1.2 PTKSA
464 7.6.1.1.3 GTKSA
7.6.1.1.4 SMKSA
465 7.6.1.1.5 STKSA
7.6.1.2 Security association life cycle
7.6.1.2.1 Security association in an ESS
466 7.6.2 RSNA selection
467 7.6.3 RSNA policy selection in an ESS
468 7.6.4 RSN management of the IEEE 802.1X Controlled Port
7.6.5 RSNA authentication in an ESS
469 7.6.5.1 Preauthentication and RSNA key management
470 7.6.5.2 Cached PMKSAs and RSNA key management
7.6.6 RSNA key management in an ESS
471 7.6.7 RSNA security association termination
7.7 DSN, PSN, and RSN keys and key distribution
7.7.1 Key hierarchy
472 7.7.1.1 PRF
473 7.7.1.2 Pairwise key hierarchy
474 7.7.1.3 Group key hierarchy
476 7.7.1.4 PeerKey key hierarchy
477 7.7.2 EAPOL-Key frames
484 7.7.2.1 EAPOL-Key frame notation
485 7.7.3 4-way handshake
486 7.7.3.1 4-way handshake message 1
487 7.7.3.2 4-way handshake message 2
489 7.7.3.3 4-way handshake message 3
490 7.7.3.4 4-way handshake message 4
491 7.7.3.5 4-way handshake implementation considerations
492 7.7.3.6 Sample 4-way handshake
493 7.7.3.7 4-way handshake analysis
495 7.7.4 Group key handshake
7.7.4.1 Group key handshake message 1
496 7.7.4.2 Group key handshake message 2
7.7.4.3 Group key handshake implementation considerations
497 7.7.4.4 Sample group key handshake
7.7.5 RSNA supplicant key management state machine
498 7.7.5.1 Supplicant state machine states
7.7.5.2 Supplicant state machine variables
499 7.7.5.3 Supplicant state machine procedures
501 7.7.5.4 Supplicant PeerKey state machine procedures
503 7.7.5.5 Supplicant PeerKey state machine variables
7.7.6 RSNA authenticator key management state machine
506 7.7.6.1 Authenticator state machine states
7.7.6.1.1 Authenticator state machine: 4-way handshake (per STA)
507 7.7.6.1.2 Authenticator state machine: group key handshake (per STA)
7.7.6.1.3 Authenticator state machine: group key handshake (global)
7.7.6.2 Authenticator state machine variables
509 7.7.6.3 Authenticator state machine procedures
7.7.7 Nonce generation
7.7.8 PeerKey handshake
510 7.7.8.1 SMK handshake
7.7.8.1.1 SMK handshake message 1
511 7.7.8.1.2 SMK handshake message 2
512 7.7.8.1.3 SMK handshake message 3
513 7.7.8.1.4 SMK handshake message 4
514 7.7.8.1.5 SMK handshake message 5
515 7.7.8.2 PeerKey setup and handshake error conditions
516 7.7.8.3 STKSA rekeying
7.7.8.4 Error reporting
517 7.7.8.4.1 Error ERR_STA_NR
7.7.8.4.2 Error ERR_STA_NRSN
7.7.8.4.3 Error ERR_CPHR_NS
518 7.7.8.4.4 Error ERR_NO_STSL
7.8 RSN: mapping EAPOL keys to 1901 keys
7.8.1 Mapping EAPOL keys to CCMP keys
7.8.1.1 Mapping PTK to CCMP keys
7.8.1.2 Mapping GTK to CCMP keys
7.8.1.3 Mapping STK to CCMP keys
7.8.2 Mapping EAPOL keys to CBC DSNA keys
7.8.2.1 Mapping PTK to CBC DSNA keys
7.8.2.2 Mapping GTK to CBC DSNA keys
7.8.2.3 Mapping STK to CBC DSNA keys
519 7.8.3 Mapping EAPOL KEYS to PSNA CBC mode keys
7.8.3.1 Mapping PTK to PSNA CBC mode keys
7.8.3.2 Mapping GTK to PSNA CBC mode keys
7.8.3.3 Mapping STK to PSNA CBC mode keys
7.9 RSN: per-frame pseudo-code
7.9.1 RSNA frame pseudo-code
7.9.1.1 Per-MSDU Tx pseudo-code
520 7.9.1.2 Per-MPDU Tx pseudo-code
7.9.1.3 Per-MPDU Rx pseudo-code
521 7.9.1.4 Per-MSDU Rx pseudo-code
7.10 Shared key DSNA
7.10.1 Common shared key DSNA elements
7.10.1.1 Overview
7.10.1.2 Encryption keys, pass phrases, nonces, and their uses
522 7.10.1.2.1 Device access key (DAK)
7.10.1.2.2 Network membership key (NMK)
7.10.1.2.3 Network encryption key (NEK)
7.10.1.2.4 Temporary encryption key (TEK)
523 7.10.1.2.5 Point-to-point encryption key (PPEK)
7.10.1.2.6 End-to-end encryption key (EEK)
7.10.1.2.7 EEK distribution key (EDK)
7.10.1.2.8 Nonces and counters
524 7.10.1.3 Encryption key uses and protocol failures
525 7.10.1.4 AES encryption algorithm and mode
7.10.1.4.1 PHY block-level encryption
7.10.1.4.2 Payload-level encryption
7.10.1.4.2.1 CM_ENCRYPTED_PAYLOAD.indication message encryption
526 7.10.1.4.2.1.1 Encrypted payload encryption bit order
7.10.1.4.2.1.2 Encrypted payload initialization vector bit order
7.10.1.4.2.1.3 Encrypted payload encryption key bit order
7.10.1.5 Generation of AES encryption keys and nonces
7.10.1.5.1 Generation of AES keys from passwords
7.10.1.5.2 Automatic generation of AES keys
527 7.10.1.5.3 Generation of nonces
7.10.1.6 Encrypted payload message
529 7.10.2 In-home shared key DSNA
7.10.2.1 Methods for authorization (NMK provisioning)
530 7.10.2.1.1 Security level
531 7.10.2.1.1.1 Secure security level
7.10.2.1.1.2 Consumer mode security level
532 7.10.2.1.1.3 Changing the security level
7.10.2.1.2 User Interface Station (UIS)
7.10.2.1.3 Preloaded NMK
7.10.2.1.4 Direct entry of the NMK
7.10.2.1.5 Distribution of NMK using DAK
534 7.10.2.1.6 Distribution of NMK using unicast key exchange (UKE)
537 7.10.2.1.7 Distribution of NMK using other key management protocols
538 7.10.2.1.8 Changing the NMK
7.10.2.2 NEK provisioning
7.10.2.2.1 Provision NEK for new STA (authentication)
540 7.10.2.2.2 Provision new NEK for part or all of the BSS
7.10.3 Access shared key DSNA
7.10.3.1 Methods for authorization (NMK provisioning)
541 7.10.3.1.1 Direct entry of the NMK
7.10.3.1.2 Distribution of NMK using DAK
7.10.3.2 NEK provisioning
542 7.10.3.3 PPEK provisioning
7.11 Shared key PSNA
7.11.1 Overview
7.11.2 Encryption keys and nonce
7.11.2.1 Key generation requirements
7.11.2.2 Pairwise key (PWK)
543 7.11.2.3 Pairwise password (PPW)
7.11.2.4 Network encryption key (NEK)
7.11.2.5 Nonce
7.11.3 Methods for sharing PWK
7.11.3.1 HLE loading PWK
544 7.11.4 Authentication method
545 7.11.4.1 Generation of network encryption key
7.11.5 Payload encryption
7.11.5.1 Encryption algorithm
7.11.5.2 Network encryption key index
7.11.5.3 Encryption key utilization
546 7.11.6 Deauthentication of STA
7.11.7 Network encryption key update
7.11.7.1 Generation of new network encryption key
7.11.7.2 Distribution of new network encryption key
548 7.11.7.3 Notification of new network encryption key
7.12 Key generation from passwords
7.13 Camellia based encryption
549 8 MAC sublayer functional description
8.1 MAC architecture
8.1.1 Carrier sense multiple access with collision avoidance (CSMA/CA)
8.1.2 Time division multiple access (TDMA) channel access
8.1.3 Concatenation and fragmentation overview
550 8.1.4 FFT BM selection
8.1.4.1 FFT in-home BM selection
8.1.4.2 FFT access HE selection
8.1.5 Wavelet BM selection
8.2 MAC functions common to in-home and access systems
8.2.1 CSMA/CA
551 8.2.1.1 PRS based prioritized CSMA/CA
552 8.2.1.1.1 Carrier sense mechanism
553 8.2.1.1.2 MAC-level acknowledgments
8.2.1.1.3 Setting of virtual carrier sense (VCS) timer
554 8.2.1.1.4 Basic access
555 8.2.1.1.5 RTS/CTS
8.2.1.1.6 CSMA/CA priorities
8.2.1.1.6.1 Channel access priority
556 8.2.1.1.7 In-home interframe spaces
558 8.2.1.1.7.1 In-home measurement of interframe spaces
8.2.1.1.8 Access system interframe spaces
560 8.2.1.1.8.1 Access system measurement of interframe spaces
561 8.2.1.1.9 Random backoff procedure
562 8.2.1.2 IFS based prioritized CSMA/CA
8.2.1.2.1 Carrier sense mechanism
563 8.2.1.2.2 Medium access mechanism
8.2.1.2.3 Contention period
8.2.1.2.4 Acknowledgments
564 8.2.1.2.5 Interframe space (IFS)
565 8.2.1.2.5.1 CIFS
8.2.1.2.5.2 SIFS
8.2.1.2.5.3 RIFS
8.2.1.2.6 NAV
566 8.2.1.2.6.1 Data/Management frame expecting an acknowledgment
8.2.1.2.6.2 ACK frame
8.2.1.2.6.3 RTS/CTS frame
567 8.2.1.2.6.4 Other frames
8.2.1.2.7 Collisions
8.2.1.2.8 Basic CSMA/CA process
8.2.1.2.8.1 Parameters
568 8.2.1.2.8.1.1 User priority (UP)
8.2.1.2.8.1.2 Internal priority (INTP)
8.2.1.2.8.1.3 Contention window (CW)
569 8.2.1.2.8.1.4 Backoff counter (BC)
8.2.1.2.8.1.5 Frame Length Limit (FLL)
8.2.1.2.8.2 Backoff procedure
570 8.2.1.2.8.3 Decision for send trial
8.2.1.2.9 CSMA/CA with priority control
572 8.2.1.2.10 RTS/CTS procedure
8.2.2 Concatenation and buffer management
8.2.2.1 FFT PHY 2-level concatenation and buffer management
8.2.2.1.1 In-home 2-level concatenation
573 8.2.2.1.1.1 Communication between associated and authenticated STAs
8.2.2.1.1.1.1 MAC frame generation
574 8.2.2.1.1.1.2 MAC frame streams
575 8.2.2.1.1.1.2.1 PLID of management streams
8.2.2.1.1.1.3 Fragmentation
576 8.2.2.1.1.1.4 Long MPDU generation
577 8.2.2.1.1.1.5 Defragmentation
578 8.2.2.1.1.2 Communication between associated but unauthenticated STAs
579 8.2.2.1.1.3 Communication between STAs not associated with the same BSS
580 8.2.2.1.1.3.1 Multi-network broadcast
581 8.2.2.1.1.4 Summary of the MAC frame streams at STA
582 8.2.2.1.2 Access system 2-level concatenation
583 8.2.2.1.2.1 Communication between associated and authenticated STAs
8.2.2.1.2.1.1 MAC frame generation
584 8.2.2.1.2.1.2 MAC frame streams
585 8.2.2.1.2.1.2.1 Priority-based TCID of management streams
586 8.2.2.1.2.1.3 Segmentation
587 8.2.2.1.2.1.4 Long MPDU generation
588 8.2.2.1.2.1.5 Reassembly
8.2.2.1.2.2 Communications between associated but unauthenticated STAs
589 8.2.2.1.2.3 Communication between STAs not associated with the same access network
590 8.2.2.1.2.3.1 Multi-network broadcast
591 8.2.2.1.3 2-level buffer management
8.2.2.1.3.1 Transmit buffer management
594 8.2.2.1.3.2 Receive buffer management
597 8.2.2.2 Wavelet PHY 1-level concatenation and buffer management
8.2.2.2.1 Concatenation
8.2.2.2.1.1 Subframe concatenation
598 8.2.2.2.1.2 Data body format of aggregated type
599 8.2.2.2.1.3 Data Body format of single type
600 8.2.2.2.2 Fragmentation
601 8.2.2.2.3 1-Level buffer management
8.2.2.2.3.1 Reordering function
8.2.2.2.3.2 Reordering
8.2.2.2.3.3 No reordering
602 8.2.2.2.3.4 Duplication check
8.2.3 Management message fragmentation
603 8.2.4 Automatic Repeat reQuest (ARQ) mechanisms
8.2.4.1 Reliable frame delivery
604 8.2.4.1.1 Selective ACK (SACK)
8.2.4.2 Request SACK retransmission
605 8.2.4.3 Broadcast/multicast and partial acknowledgment
8.2.4.4 No acknowledgment (No ACK)
606 8.2.4.5 Retransmission
8.2.4.5.1 MAC retransmission strategies
8.2.4.6 Error control ARQ
607 8.2.4.6.1 ARQ BFC and WFC modes control
609 8.2.5 Transmission modes (optional)
8.2.5.1 MPDU bursting
610 8.2.5.2 Bidirectional bursting
612 8.2.5.2.1 Bidirectional bursting during CSMA
613 8.2.5.2.2 RTS/CTS and bidirectional bursts
8.2.5.2.3 In-home connections and links during bidirectional bursts
614 8.2.5.2.4 Encryption of RSOF payload
8.2.5.3 Bidirectional transmission
616 8.2.6 Broadcast/multicast communication
8.2.6.1 Multiple transmission
617 8.2.6.2 Unicast conversion
619 8.2.6.3 Multicast tone map
8.2.7 In-home FFT channel estimation
8.2.7.1 Channel estimation procedure
620 8.2.7.2 Initial channel estimation
622 8.2.7.2.1 Restrictions on using the sound MPDU in the CP during initial channel estimation
8.2.7.2.2 Special use of ROBO mode in the CP
8.2.7.3 Dynamic channel adaptation
8.2.7.3.1 Sound MPDU transmission
623 8.2.7.3.2 Dynamic channel adaptation procedure
625 8.2.7.4 Maintenance of tone maps
626 8.2.7.5 Tone map intervals
627 8.2.7.6 Priority of channel estimation response
8.2.7.7 Channel estimation with respect to the AC line cycle
8.2.8 Access system FFT channel estimation
628 8.2.9 Wavelet channel estimation (optional)
8.2.9.1 Basic procedure
8.2.9.2 Tone map release
8.2.9.3 Execution standards
629 8.2.9.4 Conditions for tone map invalidation
8.2.9.5 Restrictions on channel estimation execution
8.2.9.6 Channel estimation region (optional)
631 8.2.9.7 Optional PHY Capabilities
8.2.10 Status functions
8.2.10.1 Network status function
8.2.10.2 Activity status function
632 8.2.11 TDMA channel access
8.2.11.1 Beacon intervals and synchronization with or without AC line cycle support
8.2.11.2 Scheduling and margin bandwidth allocation
633 8.2.11.3 Schedule notification
634 8.2.11.4 Schedule front loading
8.2.11.4.1 Mechanism
635 8.2.11.4.2 Schedule change
636 8.2.11.5 Dynamic time allocation for contention-free access
637 8.2.11.5.1 Redundancy assignment
638 8.2.11.5.2 Obtaining traffic information
8.2.11.5.3 Schedule optimization algorithm
639 8.2.11.6 Link status function
640 8.2.12 Dynamic virtual token passing (optional)
8.2.12.1 Basic access mechanism
8.2.12.1.1 Contention period
641 8.2.12.1.2 Arbitration period
8.2.12.2 Acknowledgments
642 8.2.12.3 NAV
8.2.12.3.1 Calculation of the NAV by the frame reception
8.2.12.3.1.1 Data/Management frame expecting an acknowledgment
8.2.12.3.1.2 ACK frame
643 8.2.12.3.1.3 Other frames
8.2.12.4 Random backoff
8.2.12.4.1 Random backoff procedure
8.2.12.4.2 Random backoff value
8.2.12.5 Arbitration control
8.2.12.5.1 Waiting time W(n)
644 8.2.12.5.1.1 W(n) when there is no neighboring BSS
645 8.2.12.5.1.2 W(n) when there are one or more neighboring BSSs
646 8.2.12.6 Station ID (STID) management
8.2.12.6.1 Assignment
8.2.12.6.2 STID indication
8.2.12.6.2.1 Indication by STA
8.2.12.6.2.2 Indication by BM
647 8.2.12.6.3 Deletion of assigned STID
8.2.12.6.3.1 Deletion by STA
8.2.12.6.3.2 Abandonment by STA
8.2.12.6.4 Information update count
8.2.12.7 Priority
8.2.13 FCW channel selection
8.2.13.1 Initial channel and mode of operation
648 8.2.13.2 Changing channel and mode of operation
8.2.13.3 Selection of optimum channel and mode of operation
8.2.13.4 Example of intelligent channel selection (informative)
8.3 MAC functions specific to in-home FFT systems
8.3.1 TDMA channel access
8.3.1.1 Beacon interval and AC line cycle synchronization
649 8.3.1.1.1 Line cycle synchronization
650 8.3.1.1.2 No AC line cycle support
8.3.1.2 Beacon interval structure
8.3.1.2.1 FFT beacon interval structure
654 8.3.1.2.1.1 Allocation boundaries
8.3.1.2.2 Wavelet beacon interval structure
8.3.1.2.2.1 Scheduling
8.3.1.2.2.1.1 Margin bandwidth allocation
8.3.1.2.2.2 Schedule notification
656 8.3.1.2.2.3 Schedule change
8.3.1.3 Beacon relocation procedure
657 8.3.1.4 TDMA admission control and scheduling
8.3.2 Automatic BM selection and management
658 8.3.2.1 BM selection procedure
8.3.2.1.1 Selection of BM
8.3.2.1.1.1 BM selection for a new BSS
8.3.2.1.1.2 User-appointed BM
660 8.3.2.1.1.3 Autoselection of BM
8.3.2.1.1.3.1 BM capability
661 8.3.2.1.1.3.2 Order for selection of BM
662 8.3.2.2 Transfer (or handover) of BM
663 8.3.2.3 Backup BM and BM failure recovery
8.3.2.3.1 Backup BM
664 8.3.2.3.2 BM failure recovery
8.3.3 Discover process
8.3.3.1 Overview
665 8.3.3.1.1 Discover Beacons
8.3.3.1.2 Discovered STA list and discovered network list
666 8.3.3.1.3 Topology table
8.3.3.1.4 Discovery period
667 8.3.3.2 Procedures
8.3.4 Proxy networking
668 8.3.4.1 Identification of hidden stations
669 8.3.4.2 Association of hidden station
671 8.3.4.3 Instantiation of proxy network
8.3.4.3.1 Selecting a PBM
8.3.4.3.2 PBM-required tasks
672 8.3.4.4 Proxy beacons
8.3.4.5 Provisioning the NMK to hidden stations
8.3.4.6 Provisioning NEK for hidden stations (authenticating the HSTA)
8.3.4.7 Exchange of MMEs through a PBM
673 8.3.4.8 Transitioning from being a STA to being an HSTA
8.3.4.9 Transitioning from being an HSTA to being a STA
8.3.4.10 Recovering from the loss of a PBM
8.3.4.11 Proxy network shutdown
8.3.4.12 Proxy network limitations
674 8.3.5 Detect-and-report procedure
675 8.4 MAC functions specific to access FFT systems
8.4.1 TDMA channel access
8.4.1.1 Beacon period structure and channel access mechanism
676 8.4.1.2 Line cycle synchronization
8.4.1.3 TDMA period structure
677 8.4.1.4 TDMA allocations and schedules
678 8.4.1.4.1 TDMA transmit allocation
8.4.1.4.2 TDMA receive allocation
681 8.4.1.5 Beacon transmission frequency
8.4.1.6 No AC line cycle support
8.4.1.6.1 HE behavior when no zero crossing is detected
682 8.4.1.6.2 STA behavior when no zero crossing is detected
8.4.1.7 TDMA channel access
683 8.4.1.8 Dynamic polling
8.4.1.8.1 Introduction
8.4.1.8.2 TDMA polling and new devices joining using CP
685 8.4.1.8.3 Dynamic polling
686 8.4.1.8.4 Polling for multi-hopping network
8.4.2 HE selection and management
8.4.2.1 Network selection
687 8.4.2.2 Interaccess cells—Multi-zone STAs
688 8.4.2.3 Head-end failure recovery and back-up head end
8.4.2.3.1 Backup HE mechanism description
689 8.4.2.3.1.1 Stateless failover
8.4.2.3.1.2 Stateful failover
8.4.2.3.2 Backup process activity
691 8.4.2.3.3 Access network aspects
8.4.2.4 Discovery process
8.4.3 Frequency division
8.4.4 VLAN support
693 9 Layer management
9.1 Overview of management model
694 9.2 Generic management primitives
695 9.3 MLME SAP interface
9.3.1 General security primitives
9.3.1.1 MLME-SETPROTECTION.request
9.3.1.1.1 Function
9.3.1.1.2 Semantics of the service primitive
9.3.1.1.3 When generated
696 9.3.1.1.4 Effect of receipt
9.3.1.2 MLME-SETPROTECTION.confirm
9.3.1.2.1 Function
9.3.1.2.2 Semantics of the service primitive
9.3.1.2.3 When generated
9.3.1.2.4 Effect of receipt
9.3.1.3 MLME-PROTECTEDFRAMEDROPPED.indication
9.3.1.3.1 Function
9.3.1.3.2 Semantics of the service primitive
697 9.3.1.3.3 When generated
9.3.1.3.4 Effect of receipt
9.3.1.4 MLME-AUTHENTICATE.request
9.3.1.4.1 Function
9.3.1.4.2 Semantics of the service primitive
9.3.1.4.3 When generated
9.3.1.4.4 Effect of receipt
698 9.3.1.5 MLME-AUTHENTICATE.confirm
9.3.1.5.1 Function
9.3.1.5.2 Semantics of the service primitive
9.3.1.5.3 When generated
9.3.1.5.4 Effect of receipt
699 9.3.1.6 MLME-AUTHENTICATE.indication
9.3.1.6.1 Function
9.3.1.6.2 Semantics of the service primitive
9.3.1.6.3 When generated
9.3.1.6.4 Effect of receipt
9.3.1.7 MLME-AUTHENTICATE.response
9.3.1.7.1 Function
9.3.1.7.2 Semantics of the service primitive
700 9.3.1.7.3 When generated
9.3.1.7.4 Effect of receipt
9.3.1.8 MLME-DEAUTHENTICATE.request
9.3.1.8.1 Function
9.3.1.8.2 Semantics of the service primitive
9.3.1.8.3 When generated
9.3.1.8.4 Effect of receipt
701 9.3.1.9 MLME-DEAUTHENTICATE.confirm
9.3.1.9.1 Function
9.3.1.9.2 Semantics of the service primitive
9.3.1.9.3 When generated
9.3.1.9.4 Effect of receipt
9.3.1.10 MLME-DEAUTHENTICATE.indication
9.3.1.10.1 Function
9.3.1.10.2 Semantics of the service primitive
702 9.3.1.10.3 When generated
9.3.1.10.4 Effect of receipt
9.3.1.11 MLME-ASSOCIATE.request
9.3.1.11.1 Function
9.3.1.11.2 Semantics of the service primitive
703 9.3.1.11.3 When generated
9.3.1.11.4 Effect of receipt
9.3.1.12 MLME-ASSOCIATE.confirm
9.3.1.12.1 Function
9.3.1.12.2 Semantics of the service primitive
704 9.3.1.12.3 When generated
9.3.1.12.4 Effect of receipt
9.3.1.13 MLME-ASSOCIATE.indication
9.3.1.13.1 Function
9.3.1.13.2 Semantics of the service primitive
705 9.3.1.13.3 When generated
9.3.1.13.4 Effect of receipt
9.3.1.14 MLME-ASSOCIATE.response
9.3.1.14.1 Function
9.3.1.14.2 Semantics of the service primitive
706 9.3.1.14.3 When generated
9.3.1.14.4 Effect of receipt
9.3.1.15 MLME-REASSOCIATE.request
9.3.1.15.1 Function
9.3.1.15.2 Semantics of the service primitive
707 9.3.1.15.3 When generated
9.3.1.15.4 Effect of receipt
9.3.1.16 MLME-REASSOCIATE.confirm
9.3.1.16.1 Function
9.3.1.16.2 Semantics of the service primitive
708 9.3.1.16.3 When generated
9.3.1.16.4 Effect of receipt
9.3.1.17 MLME-REASSOCIATE.indication
9.3.1.17.1 Function
9.3.1.17.2 Semantics of the service primitive
709 9.3.1.17.3 When generated
9.3.1.17.4 Effect of receipt
9.3.1.18 MLME-REASSOCIATE.response
9.3.1.18.1 Function
9.3.1.18.2 Semantics of the service primitive
710 9.3.1.18.3 When generated
9.3.1.18.4 Effect of receipt
9.3.1.19 MLME-DISASSOCIATE.request
9.3.1.19.1 Function
9.3.1.19.2 Semantics of the service primitive
711 9.3.1.19.3 When generated
9.3.1.19.4 Effect of receipt
9.3.1.20 MLME-DISASSOCIATE.confirm
9.3.1.20.1 Function
9.3.1.20.2 Semantics of the service primitive
9.3.1.20.3 When generated
9.3.1.20.4 Effect of receipt
9.3.1.21 MLME-DISASSOCIATE.indication
9.3.1.21.1 Function
712 9.3.1.21.2 Semantics of the service primitive
9.3.1.21.3 When generated
9.3.1.21.4 Effect of receipt
9.3.1.22 MLME-EAPOL.request
9.3.1.22.1 Function
9.3.1.22.2 Semantics of the service primitive
713 9.3.1.22.3 When generated
9.3.1.22.4 Effect of receipt
9.3.1.23 MLME-EAPOL.confirm
9.3.1.23.1 Function
9.3.1.23.2 Semantics of the service primitive
9.3.1.23.3 When generated
9.3.1.23.4 Effect of receipt
9.3.2 Robust Security Network Association (RSNA)
9.3.2.1 MLME-RSNASCAN.request
9.3.2.1.1 Function
714 9.3.2.1.2 Semantics of the service primitive
9.3.2.1.3 When generated
9.3.2.1.4 Effect of receipt
9.3.2.2 MLME-RSNASCAN.confirm
9.3.2.2.1 Function
715 9.3.2.2.2 Semantics of the service primitive
716 9.3.2.2.3 When generated
9.3.2.2.4 Effect of receipt
9.3.2.3 MLME-RSNASETKEYS.request
9.3.2.3.1 Function
9.3.2.3.2 Semantics of the service primitive
717 9.3.2.3.3 When generated
9.3.2.3.4 Effect of receipt
9.3.2.4 MLME-RSNASETKEYS.confirm
9.3.2.4.1 Function
9.3.2.4.2 Semantics of the service primitive
9.3.2.4.3 When generated
9.3.2.4.4 Effect of receipt
9.3.2.5 MLME-RSNADELETEKEYS.request
9.3.2.5.1 Function
718 9.3.2.5.2 Semantics of the service primitive
9.3.2.5.3 When generated
9.3.2.5.4 Effect of receipt
9.3.2.6 MLME-RSNADELETEKEYS.confirm
9.3.2.6.1 Function
9.3.2.6.2 Semantics of the service primitive
9.3.2.6.3 When generated
9.3.2.6.4 Effect of receipt
719 9.3.2.7 MLME-RSNAPeerKeySTART.request
9.3.2.7.1 Function
9.3.2.7.2 Semantics of the service primitive
9.3.2.7.3 When generated
9.3.2.7.4 Effect of receipt
9.3.3 Device-based Security Network Association (DSNA)
9.3.3.1 MLME-AUTHORIZE.request
9.3.3.1.1 Function
9.3.3.1.2 Semantics of the service primitive
720 9.3.3.1.3 When generated
9.3.3.1.4 Effect of receipt
9.3.3.2 MLME-AUTHORIZE.confirm
9.3.3.2.1 Function
9.3.3.2.2 Semantics of the service primitive
721 9.3.3.2.3 When generated
9.3.3.2.4 Effect of receipt
9.3.3.3 MLME-AUTHORIZE.indication
9.3.3.3.1 Function
9.3.3.3.2 Semantics of the service primitive
9.3.3.3.3 When generated
9.3.3.3.4 Effect of receipt
9.3.3.4 MLME-APNC_AUTHORIZE.indication
9.3.3.4.1 Function
722 9.3.3.4.2 Semantics of the service primitive
9.3.3.4.3 When generated
9.3.3.4.4 Effect of receipt
9.3.3.5 MLME-APNC_AUTHORIZE.response
9.3.3.5.1 Function
9.3.3.5.2 Semantics of the service primitive
723 9.3.3.5.3 When generated
9.3.3.5.4 Effect of receipt
9.3.3.6 MLME-APNC_NEW_CPE.indication
9.3.3.6.1 Function
9.3.3.6.2 Semantics of the service primitive
9.3.3.6.3 When generated
724 9.3.3.6.4 Effect of receipt
9.3.3.7 MLME-APNC_NEW_CPE_AUTHORIZE.request
9.3.3.7.1 Function
9.3.3.7.2 Semantics of the service primitive
9.3.3.7.3 When generated
9.3.3.7.4 Effect of receipt
725 9.3.3.8 MLME-APNC_NEW_CPE_AUTHORIZE.confirm
9.3.3.8.1 Function
9.3.3.8.2 Semantics of the service primitive
9.3.3.8.3 When generated
9.3.3.8.4 Effect of receipt
9.3.3.9 MLME-APNC_NEW_CPE_AUTHORIZE.indication
9.3.3.9.1 Function
726 9.3.3.9.2 Semantics of the service primitive
9.3.3.9.3 When generated
9.3.3.9.4 Effect of receipt
9.3.3.10 MLME-APNC_CPE_NMK.indication
9.3.3.10.1 Function
9.3.3.10.2 Semantics of the service primitive
727 9.3.3.10.3 When generated
9.3.3.10.4 Effect of receipt
9.3.3.11 MLME-APNC_CPE_NMK.response
9.3.3.11.1 Function
9.3.3.11.2 Semantics of the service primitive
9.3.3.11.3 When generated
728 9.3.3.11.4 Effect of receipt
9.3.3.12 MLME-SETKEY.request
9.3.3.12.1 Function
9.3.3.12.2 Semantics of the service primitive
9.3.3.12.3 When generated
9.3.3.12.4 Effect of receipt
9.3.3.13 MLME-SETKEY.confirm
9.3.3.13.1 Function
729 9.3.3.13.2 Semantics of the service primitive
9.3.3.13.3 When generated
9.3.3.13.4 Effect of receipt
9.3.3.14 MLME-GETKEY.request
9.3.3.14.1 Function
9.3.3.14.2 Semantics of the service primitive
9.3.3.14.3 When generated
9.3.3.14.4 Effect of receipt
9.3.3.15 MLME-GETKEY.confirm
9.3.3.15.1 Function
730 9.3.3.15.2 Semantics of the service primitive
9.3.3.15.3 When generated
9.3.3.15.4 Effect of receipt
9.3.3.16 MLME-APNC_SET_KEY.request
9.3.3.16.1 Function
9.3.3.16.2 Semantics of the service primitive
731 9.3.3.16.3 When generated
9.3.3.16.4 Effect of receipt
9.3.3.17 MLME-APNC_SET_KEY.confirm
9.3.3.17.1 Function
9.3.3.17.2 Semantics of the service primitive
9.3.3.17.3 When generated
9.3.3.17.4 Effect of receipt
9.3.3.18 MLME-APCM_GET_SECURITY_MODE.request
9.3.3.18.1 Function
9.3.3.18.2 Semantics of the service primitive
732 9.3.3.18.3 When generated
9.3.3.18.4 Effect of receipt
9.3.3.19 MLME-APCM_GET_SECURITY_MODE.confirm
9.3.3.19.1 Function
9.3.3.19.2 Semantics of the service primitive
9.3.3.19.3 When generated
9.3.3.19.4 Effect of receipt
9.3.3.20 MLME-APCM_SET_SECURITY_MODE.request
9.3.3.20.1 Function
9.3.3.20.2 Semantics of the service primitive
733 9.3.3.20.3 When generated
9.3.3.20.4 Effect of receipt
9.3.3.21 MLME-APCM_SET_SECURITY_MODE.confirm
9.3.3.21.1 Function
9.3.3.21.2 Semantics of the service primitive
9.3.3.21.3 When generated
9.3.3.21.4 Effect of receipt
9.3.3.22 MLME-APCM_SET_KEY.request
9.3.3.22.1 Function
734 9.3.3.22.2 Semantics of the service primitive
9.3.3.22.3 When generated
9.3.3.22.4 Effect of receipt
9.3.3.23 MLME-APCM_SET_KEY.confirm
9.3.3.23.1 Function
9.3.3.23.2 Semantics of the service primitive
9.3.3.23.3 When generated
9.3.3.23.4 Effect of receipt
735 9.3.3.24 MLME-APCM_SET_PPKEYS.request
9.3.3.24.1 Function
9.3.3.24.2 Semantics of the service primitive
9.3.3.24.3 When generated
9.3.3.24.4 Effect of receipt
9.3.3.25 MLME-APCM_SET_PPKEYS.confirm
9.3.3.25.1 Function
9.3.3.25.2 Semantics of the service primitive
736 9.3.3.25.3 When generated
9.3.3.25.4 Effect of receipt
9.3.3.26 MLME-APCM_GET_KEY.request
9.3.3.26.1 Function
9.3.3.26.2 Semantics of the service primitive
9.3.3.26.3 When generated
9.3.3.26.4 Effect of receipt
9.3.3.27 MLME-APCM_GET_KEY.confirm
9.3.3.27.1 Function
9.3.3.27.2 Semantics of the service primitive
9.3.3.27.3 When generated
9.3.3.27.4 Effect of receipt
737 9.3.4 Pairwise Security Network Association (PSNA)
9.3.4.1 MLME-PSNASCAN.request
9.3.4.1.1 Function
9.3.4.1.2 Semantics of the service primitive
738 9.3.4.1.3 When generated
9.3.4.1.4 Effect of receipt
9.3.4.2 MLME-PSNASCAN.confirm
9.3.4.2.1 Function
9.3.4.2.2 Semantics of the service primitive
739 9.3.4.2.3 When generated
9.3.4.2.4 Effect of receipt
9.3.4.3 MLME-PSNAAUTHENTICATE.request
9.3.4.3.1 Function
9.3.4.3.2 Semantics of the service primitive
740 9.3.4.3.3 When generated
9.3.4.3.4 Effect of receipt
9.3.4.4 MLME-PSNAAUTHENTICATE.confirm
9.3.4.4.1 Function
9.3.4.4.2 Semantics of the service primitive
741 9.3.4.4.3 When generated
9.3.4.4.4 Effect of receipt
9.3.4.5 MLME-PSNAAUTHENTICATE.indication
9.3.4.5.1 Function
9.3.4.5.2 Semantics of the service primitive
742 9.3.4.5.3 When generated
9.3.4.5.4 Effect of receipt
9.3.4.6 MLME-PSNAAUTHENTICATE.response
9.3.4.6.1 Function
9.3.4.6.2 Semantics of the service primitive
9.3.4.6.3 When generated
9.3.4.6.4 Effect of receipt
9.3.4.7 MLME-PSNADEAUTHENTICATE.request
9.3.4.7.1 Function
743 9.3.4.7.2 Semantics of the service primitive
9.3.4.7.3 When generated
9.3.4.7.4 Effect of receipt
9.3.4.8 MLME-PSNADEAUTHENTICATE.confirm
9.3.4.8.1 Function
9.3.4.8.2 Semantics of the service primitive
744 9.3.4.8.3 When generated
9.3.4.8.4 Effect of receipt
9.3.4.9 MLME-PSNADEAUTHENTICATE.indication
9.3.4.9.1 Function
9.3.4.9.2 Semantics of the service primitive
745 9.3.4.9.3 When generated
9.3.4.9.4 Effect of receipt
9.3.4.10 MLME-PSNASETNEK.request
9.3.4.10.1 Function
9.3.4.10.2 Semantics of the service primitive
9.3.4.10.3 When generated
746 9.3.4.10.4 Effect of receipt
9.3.4.11 MLME-PSNASETNEK.confirm
9.3.4.11.1 Function
9.3.4.11.2 Semantics of the service primitive
9.3.4.11.3 When generated
9.3.4.11.4 Effect of receipt
747 9.3.4.12 MLME-PSNADELNEK.request
9.3.4.12.1 Function
9.3.4.12.2 Semantics of the service primitive
9.3.4.12.3 When generated
9.3.4.12.4 Effect of receipt
748 9.3.4.13 MLME-PSNADELNEK.confirm
9.3.4.13.1 Function
9.3.4.13.2 Semantics of the service primitive
9.3.4.13.3 When generated
9.3.4.13.4 Effect of receipt
9.3.4.14 MLME-PSNASETPWK.request
9.3.4.14.1 Function
749 9.3.4.14.2 Semantics of the service primitive
9.3.4.14.3 When generated
9.3.4.14.4 Effect of receipt
9.3.4.15 MLME-PSNASETPWK.confirm
9.3.4.15.1 Function
9.3.4.15.2 Semantics of the service primitive
9.3.4.15.3 When generated
750 9.3.4.15.4 Effect of receipt
9.3.4.16 MLME-PSNADELPWK.request
9.3.4.16.1 Function
9.3.4.16.2 Semantics of the service primitive
9.3.4.16.3 When generated
9.3.4.16.4 Effect of receipt
751 9.3.4.17 MLME-PSNADELPWK.confirm
9.3.4.17.1 Function
9.3.4.17.2 Semantics of the service primitive
9.3.4.17.3 When generated
9.3.4.17.4 Effect of receipt
9.3.5 Station and BM primitives
9.3.5.1 MLME-APPOINTBM.request
9.3.5.1.1 Function
9.3.5.1.2 Semantics of the service primitive
752 9.3.5.1.3 When generated
9.3.5.1.4 Effect of receipt
9.3.5.2 MLME-APPOINTBM.confirm
9.3.5.2.1 Function
9.3.5.2.2 Semantics of the service primitive
753 9.3.5.2.3 When generated
9.3.5.2.4 Effect of receipt
9.3.5.3 MLME-APPOINTBACKUPBM.request
9.3.5.3.1 Function
754 9.3.5.3.2 Semantics of the service primitive
9.3.5.3.3 When generated
9.3.5.3.4 Effect of receipt
9.3.5.4 MLME-APPOINTBACKUPBM.confirm
9.3.5.4.1 Function
9.3.5.4.2 Semantics of the service primitive
755 9.3.5.4.3 When generated
9.3.5.4.4 Effect of receipt
9.3.5.5 MLME-LINKINFORMATION.request
9.3.5.5.1 Function
9.3.5.5.2 Semantics of the service primitive
9.3.5.5.3 When generated
9.3.5.5.4 Effect of receipt
756 9.3.5.6 MLME-LINKINFORMATION.confirm
9.3.5.6.1 Function
9.3.5.6.2 Semantics of the service primitive
757 9.3.5.6.3 When generated
9.3.5.6.4 Effect of receipt
9.3.5.7 MLME-LINKINFORMATION.indication
9.3.5.7.1 Function
9.3.5.7.2 Semantics of the service primitive
758 9.3.5.7.3 When generated
9.3.5.7.4 Effect of receipt
759 9.3.5.8 MLME-LINKINFORMATION.response
9.3.5.8.1 Function
9.3.5.8.2 Semantics of the service primitive
9.3.5.8.3 When generated
9.3.5.8.4 Effect of receipt
9.3.5.9 MLME-BMHANDOVER.request
9.3.5.9.1 Function
9.3.5.9.2 Semantics of the service primitive
760 9.3.5.9.3 When generated
9.3.5.9.4 Effect of receipt
9.3.5.10 MLME-BMHANDOVER.confirm
9.3.5.10.1 Function
9.3.5.10.2 Semantics of the service primitive
9.3.5.10.3 When generated
761 9.3.5.10.4 Effect of receipt
9.3.5.11 MLME-HANDOVERINFORMATION.indication
9.3.5.11.1 Function
9.3.5.11.2 Semantics of the service primitive
762 9.3.5.11.3 When generated
9.3.5.11.4 Effect of receipt
9.3.5.12 MLME-HANDOVERINFORMATION.response
9.3.5.12.1 Function
9.3.5.12.2 Semantics of the service primitive
763 9.3.5.12.3 When generated
9.3.5.12.4 Effect of receipt
9.3.5.13 MLME-DISCOVERLIST.request
9.3.5.13.1 Function
9.3.5.13.2 Semantics of the service primitive
9.3.5.13.3 When generated
9.3.5.13.4 Effect of receipt
9.3.5.14 MLME-DISCOVERLIST.confirm
9.3.5.14.1 Function
764 9.3.5.14.2 Semantics of the service primitive
766 9.3.5.14.3 When generated
9.3.5.14.4 Effect of receipt
9.3.5.15 MLME-DISCOVERLIST.indication
9.3.5.15.1 Function
9.3.5.15.2 Semantics of the service primitive
767 9.3.5.15.3 When generated
9.3.5.15.4 Effect of receipt
9.3.5.16 MLME-NEWLINK.request
9.3.5.16.1 Function
9.3.5.16.2 Semantics of the service primitive
769 9.3.5.16.2.1 Number of Intervals
9.3.5.16.2.2 Interval End Time # 1–N
9.3.5.16.2.3 Bit Loading Estimate # 1–N
9.3.5.16.3 When generated
9.3.5.16.4 Effect of receipt
9.3.5.17 MLME-NEWLINK.confirm
9.3.5.17.1 Function
9.3.5.17.2 Semantics of the service primitive
770 9.3.5.17.3 When generated
9.3.5.17.4 Effect of receipt
9.3.5.18 MLME-MODIFYLINK.request
9.3.5.18.1 Function
771 9.3.5.18.2 Semantics of the service primitive
772 9.3.5.18.2.1 Number of Intervals
9.3.5.18.2.2 Interval End Time # 1–N
9.3.5.18.2.3 Bit Loading Estimate # 1–N
773 9.3.5.18.3 When generated
9.3.5.18.4 Effect of receipt
9.3.5.19 MLME-MODIFYLINK.confirm
9.3.5.19.1 Function
9.3.5.19.2 Semantics of the service primitive
9.3.5.19.3 When generated
774 9.3.5.19.4 Effect of receipt
9.3.5.20 MLME-SQUEEZELINK.request
9.3.5.20.1 Function
9.3.5.20.2 Semantics of the service primitive
9.3.5.20.3 When generated
9.3.5.20.4 Effect of receipt
9.3.5.21 MLME-SQUEEZELINK.confirm
9.3.5.21.1 Function
775 9.3.5.21.2 Semantics of the service primitive
9.3.5.21.3 When generated
9.3.5.21.4 Effect of receipt
9.3.5.22 MLME-RELEASELINK.request
9.3.5.22.1 Function
776 9.3.5.22.2 Semantics of the service primitive
9.3.5.22.3 When generated
9.3.5.22.4 Effect of receipt
777 9.3.5.23 MLME-RELEASELINK.indication
9.3.5.23.1 Function
9.3.5.23.2 Semantics of the service primitive
778 9.3.5.23.3 When generated
9.3.5.23.4 Effect of receipt
9.3.5.24 MLME-DETECTANDREPORT.request
9.3.5.24.1 Function
9.3.5.24.2 Semantics of the service primitive
779 9.3.5.24.3 When generated
9.3.5.24.4 Effect of receipt
9.3.5.25 MLME-DETECTANDREPORT.confirm
9.3.5.25.1 Function
9.3.5.25.2 Semantics of the service primitive
780 9.3.5.25.3 When generated
9.3.5.25.4 Effect of receipt
781 9.3.5.26 MLME-IDENTIFYBSS.request
9.3.5.26.1 Function
9.3.5.26.2 Semantics of the service primitive
9.3.5.26.3 When generated
9.3.5.26.4 Effect of receipt
9.3.5.27 MLME-IDENTIFYBSS.confirm
9.3.5.27.1 Function
782 9.3.5.27.2 Semantics of the service primitive
9.3.5.27.3 When generated
9.3.5.27.4 Effect of receipt
9.3.5.28 MLME-ASSOC.request
9.3.5.28.1 Function
9.3.5.28.2 Semantics of the service primitive
783 9.3.5.28.3 When generated
9.3.5.28.4 Effect of receipt
9.3.5.29 MLME-ASSOC.confirm
9.3.5.29.1 Function
9.3.5.29.2 Semantics of the service primitive
9.3.5.29.3 When generated
9.3.5.29.4 Effect of receipt
9.3.5.30 MLME-LEAVE.request
9.3.5.30.1 Function
784 9.3.5.30.2 Semantics of the service primitive
9.3.5.30.3 When generated
9.3.5.30.4 Effect of receipt
9.3.5.31 MLME-LEAVE.confirm
9.3.5.31.1 Function
9.3.5.31.2 Semantics of the service primitive
9.3.5.31.3 When generated
9.3.5.31.4 Effect of receipt
785 9.3.5.32 MLME-LEAVE.indication
9.3.5.32.1 Function
9.3.5.32.2 Semantics of the service primitive
9.3.5.32.3 When generated
9.3.5.32.4 Effect of receipt
9.3.5.33 MLME-LEAVE.response
9.3.5.33.1 Function
9.3.5.33.2 Semantics of the service primitive
786 9.3.5.33.3 When generated
9.3.5.33.4 Effect of receipt
9.3.5.34 MLME-SETTEIMAP.request
9.3.5.34.1 Function
9.3.5.34.2 Semantics of the service primitive
9.3.5.34.3 When generated
9.3.5.34.4 Effect of receipt
9.3.5.35 MLME-SETTEIMAP.indication
9.3.5.35.1 Function
787 9.3.5.35.2 Semantics of the service primitive
9.3.5.35.2.1 TEI_Info structure
9.3.5.35.2.2 Mode
788 9.3.5.35.2.3 Addr_i
9.3.5.35.3 When generated
9.3.5.35.4 Effect of receipt
9.3.5.36 MLME-RELAY.request
9.3.5.36.1 Function
789 9.3.5.36.2 Semantics of the service primitive
9.3.5.36.3 When generated
9.3.5.36.4 Effect of receipt
9.3.5.37 MLME-RELAY.indication
9.3.5.37.1 Function
790 9.3.5.37.2 Semantics of the service primitive
9.3.5.37.3 When generated
9.3.5.37.4 Effect of receipt
9.3.5.38 MLME-BEACONRELIABILITY.request
9.3.5.38.1 Function
791 9.3.5.38.2 Semantics of the service primitive
9.3.5.38.3 When generated
9.3.5.38.4 Effect of receipt
9.3.5.39 MLME-BEACONRELIABILITY.confirm
9.3.5.39.1 Function
9.3.5.39.2 Semantics of the service primitive
792 9.3.5.39.3 When generated
9.3.5.39.4 Effect of receipt
9.3.5.40 MLME-MOVEALLOCATION.request
9.3.5.40.1 Function
9.3.5.40.2 Semantics of the service primitive
793 9.3.5.40.3 When generated
9.3.5.40.4 Effect of receipt
9.3.5.41 MLME-MOVEALLOCATION.confirm
9.3.5.41.1 Function
794 9.3.5.41.2 Semantics of the service primitive
9.3.5.41.3 When generated
9.3.5.41.4 Effect of receipt
9.3.5.42 MLME-NEWACCESS.request
9.3.5.42.1 Function
9.3.5.42.2 Semantics of the service primitive
795 9.3.5.42.3 When generated
9.3.5.42.4 Effect of receipt
9.3.5.43 MLME-NEWACCESS.confirm
9.3.5.43.1 Function
9.3.5.43.2 Semantics of the service primitive
796 9.3.5.43.3 When generated
9.3.5.43.4 Effect of receipt
797 9.3.5.44 MLME-NEWACCESS.indication
9.3.5.44.1 Function
9.3.5.44.2 Semantics of the service primitive
798 9.3.5.44.3 When generated
9.3.5.44.4 Effect of receipt
9.3.5.45 MLME-NEWACCESS.response
9.3.5.45.1 Function
9.3.5.45.2 Semantics of the service primitive
799 9.3.5.45.3 When generated
9.3.5.45.4 Effect of receipt
9.3.5.46 MLME-RELEASEACCESS.request
9.3.5.46.1 Function
800 9.3.5.46.2 Semantics of the service primitive
9.3.5.46.3 When generated
9.3.5.46.4 Effect of receipt
9.3.5.47 MLME-RELEASEACCESS.confirm
9.3.5.47.1 Function
801 9.3.5.47.2 Semantics of the service primitive
9.3.5.47.3 When generated
9.3.5.47.4 Effect of receipt
9.3.5.48 MLME-RELEASEACCESS.indication
9.3.5.48.1 Function
802 9.3.5.48.2 Semantics of the service primitive
9.3.5.48.3 When generated
9.3.5.48.4 Effect of receipt
9.3.5.49 MLME-RELEASEACCESS.response
9.3.5.49.1 Function
803 9.3.5.49.2 Semantics of the service primitive
9.3.5.49.3 When generated
9.3.5.49.4 Effect of receipt
9.3.5.50 MLME-DIFFERENTPHYCLOCK.indication
9.3.5.50.1 Function
804 9.3.5.50.2 Semantics of the service primitive
9.3.5.50.3 When generated
9.3.5.50.4 Effect of receipt
9.3.5.51 MLME-DIFFERENTPHYCLOCK.response
9.3.5.51.1 Function
9.3.5.51.2 Semantics of the service primitive
805 9.3.5.51.3 When generated
9.3.5.51.4 Effect of receipt
9.3.5.52 MLME-BITLOADINGESTIMATEUPDATE.indication
9.3.5.52.1 Function
9.3.5.52.2 Semantics of the service primitive
806 9.3.5.52.3 When generated
9.3.5.52.4 Effect of receipt
9.3.5.53 MLME-REPEATBROADCAST.indication
9.3.5.53.1 Function
9.3.5.53.2 Semantics of the service primitive
9.3.5.53.3 When generated
9.3.5.53.4 Effect of receipt
807 9.3.5.54 MLME-REPEATBROADCAST.response
9.3.5.54.1 Function
9.3.5.54.2 Semantics of the service primitive
9.3.5.54.3 When generated
9.3.5.54.4 Effect of receipt
9.3.5.55 MLME-NEWMULTIHOPLINK.request
9.3.5.55.1 Function
808 9.3.5.55.2 Semantics of the service primitive
809 9.3.5.55.2.1 Forward link and reverse link bit loading estimates
810 9.3.5.55.2.2 Number of intervals
9.3.5.55.2.3 Interval Structure
9.3.5.55.2.3.1 Interval End Time
9.3.5.55.2.3.2 Bit Loading Estimate
9.3.5.55.3 When generated
9.3.5.55.4 Effect of receipt
9.3.5.56 MLME-NEWMULTIHOPLINK.confirm
9.3.5.56.1 Function
811 9.3.5.56.2 Semantics of the service primitive
9.3.5.56.3 When generated
9.3.5.56.4 Effect of receipt
9.3.5.57 MLME-ISP.indication
9.3.5.57.1 Function
9.3.5.57.2 Semantics of the service primitive
9.3.5.57.3 When generated
812 9.3.5.57.4 Effect of receipt
9.3.5.58 MLME-APPOINTPROXY.request
9.3.5.58.1 Function
9.3.5.58.2 Semantics of the service primitive
813 9.3.5.58.3 When generated
9.3.5.58.4 Effect of receipt
9.3.5.59 MLME-APPOINTPROXY.confirm
9.3.5.59.1 Function
9.3.5.59.2 Semantics of the service primitive
814 9.3.5.59.3 When generated
9.3.5.59.4 Effect of receipt
9.3.5.60 MLME-APPOINTPROXY.indication
9.3.5.60.1 Function
9.3.5.60.2 Semantics of the service primitive
815 9.3.5.60.3 When generated
9.3.5.60.4 Effect of receipt
9.3.5.61 MLME-WAKEPROXY.request
9.3.5.61.1 Function
9.3.5.61.2 Semantics of the service primitive
9.3.5.61.3 When generated
9.3.5.61.4 Effect of receipt
9.3.5.62 MLME-NEIGHBORNETWORKLIST.request
9.3.5.62.1 Function
816 9.3.5.62.2 Semantics of the service primitive
818 9.3.5.62.3 When generated
9.3.5.62.4 Effect of receipt
9.3.5.63 MLME-NEIGHBORNETWORKLIST.confirm
9.3.5.63.1 Function
819 9.3.5.63.2 Semantics of the service primitive
821 9.3.5.63.3 When generated
9.3.5.63.4 Effect of receipt
9.3.5.64 MLME-NEWNETWORK.request
9.3.5.64.1 Function
822 9.3.5.64.2 Semantics of the service primitive
823 9.3.5.64.3 When generated
9.3.5.64.4 Effect of receipt
824 9.3.5.65 MLME-NEWNETWORK.confirm
9.3.5.65.1 Function
9.3.5.65.2 Semantics of the service primitive
825 9.3.5.65.3 When generated
9.3.5.65.4 Effect of receipt
826 9.3.5.66 MLME-NEWNETWORK.indication
9.3.5.66.1 Function
9.3.5.66.2 Semantics of the service primitive
827 9.3.5.66.3 When generated
9.3.5.66.4 Effect of receipt
9.3.5.67 MLME-ADDALLOCATION.request
9.3.5.67.1 Function
9.3.5.67.2 Semantics of the service primitive
828 9.3.5.67.3 When generated
9.3.5.67.4 Effect of receipt
829 9.3.5.68 MLME-ADDALLOCATION.confirm
9.3.5.68.1 Function
9.3.5.68.2 Semantics of the service primitive
9.3.5.68.3 When generated
9.3.5.68.4 Effect of receipt
830 9.3.5.69 MLME-ADDALLOCATION.indication
9.3.5.69.1 Function
9.3.5.69.2 Semantics of the service primitive
9.3.5.69.3 When generated
831 9.3.5.69.4 Effect of receipt
9.3.5.70 MLME-RELEASEALLOCATION.request
9.3.5.70.1 Function
9.3.5.70.2 Semantics of the service primitive
832 9.3.5.70.3 When generated
9.3.5.70.4 Effect of receipt
9.3.5.71 MLME-RELEASEALLOCATION.confirm
9.3.5.71.1 Function
9.3.5.71.2 Semantics of the service primitive
833 9.3.5.71.3 When generated
9.3.5.71.4 Effect of receipt
9.3.5.72 MLME-RELEASENETWORK.indication
9.3.5.72.1 Function
9.3.5.72.2 Semantics of the service primitive
834 9.3.5.72.3 When generated
9.3.5.72.4 Effect of receipt
9.3.5.73 MLME-UNASSOCIATEDSTA.indication
9.3.5.73.1 Function
835 9.3.5.73.2 Semantics of the service primitive
9.3.5.73.3 When generated
9.3.5.73.4 Effect of receipt
9.3.5.74 MLME-ENCRYPTEDPAYLOAD.indication
9.3.5.74.1 Function
836 9.3.5.74.2 Semantics of the service primitive
838 9.3.5.74.2.1 Payload Encryption Key Select (PayloadEncryptKeySel parameter)
9.3.5.74.2.2 BSS Status (BSS_Status parameter)
9.3.5.74.2.3 Protocol ID (PID parameter)
9.3.5.74.2.4 Protocol Run Number (ProtocolRunNum parameter)
9.3.5.74.2.5 Protocol Message Number (ProtocolMsgNum parameter)
839 9.3.5.74.2.6 Initialization Vector or Universally Unique Identifier (IV_UUID parameter)
9.3.5.74.2.7 Length (MgmtMsgLen parameter)
9.3.5.74.2.8 Random Filler (RandomFiller parameter)
9.3.5.74.2.9 Management Message (MM_SMEPayload parameter)
9.3.5.74.2.10 Cyclic Redundancy Code (CRC parameter)
9.3.5.74.2.11 Protocol ID (ProtocolID parameter — Encrypted)
9.3.5.74.2.12 Protocol Run Number (ProtocolRunNum parameter — Encrypted)
9.3.5.74.2.13 Protocol Message Number (ProtocolMsgNum parameter — Encrypted)
9.3.5.74.2.14 Padding (EncryptPad parameter — Encrypted)
840 9.3.5.74.2.15 Random Filler Length (RandomFillerLen parameter — Encrypted)
9.3.5.74.3 When generated
9.3.5.74.4 Effect of receipt
9.3.5.75 MLME-ENCRYPTEDPAYLOAD.response
9.3.5.75.1 Function
9.3.5.75.2 Semantics of the service primitive
9.3.5.75.2.1 ResultCode
841 9.3.5.75.2.2 Protocol ID (ProtocolID parameter)
9.3.5.75.2.3 Protocol Run Number (ProtocolRunNum parameter)
9.3.5.75.3 When generated
9.3.5.75.4 Effect of receipt
9.3.5.76 MLME-SIMPLECONNECTJOIN.request
9.3.5.76.1 Function
9.3.5.76.2 Semantics of the service primitive
9.3.5.76.3 When generated
9.3.5.76.4 Effect of receipt
842 9.3.5.77 MLME-SIMPLECONNECTJOIN.confirm
9.3.5.77.1 Function
9.3.5.77.2 Semantics of the service primitive
9.3.5.77.3 When generated
843 9.3.5.77.4 Effect of receipt
9.3.5.78 MLME-WAVELETCHANNELESTIMATION.indication
9.3.5.78.1 Function
9.3.5.78.2 Semantics of the service primitive
9.3.5.78.3 When generated
9.3.5.78.4 Effect of receipt
9.3.5.79 MLME-FFTCHANNELESTIMATION.indication
9.3.5.79.1 Function
844 9.3.5.79.2 Semantics of the service primitive
846 9.3.5.79.2.1 MaxFL
847 9.3.5.79.2.2 RIFS_OneSym
9.3.5.79.2.3 RIFS_TwoSym
9.3.5.79.2.4 RIFS_G2Sym
9.3.5.79.2.5 Carrier Bit Loading Data (CBD)
9.3.5.79.2.5.1 Binary Encoding (CBD_ENC = 0x00)
848 9.3.5.79.2.5.2 Run Length Encoding (CBD_ENC = 0x01)
849 9.3.5.79.3 When generated
9.3.5.79.4 Effect of receipt
9.3.5.80 MLME-TONEMAPUPDATE.indication
9.3.5.80.1 Function
850 9.3.5.80.2 Semantics of the service primitive
852 9.3.5.80.3 When generated
9.3.5.80.4 Effect of receipt
9.3.5.81 MLME-AMP_MAP.request
9.3.5.81.1 Function
9.3.5.81.2 Semantics of the service primitive
853 9.3.5.81.3 When generated
9.3.5.81.4 Effect of receipt
9.3.5.82 MLME-AMP_MAP.confirm
9.3.5.82.1 Function
9.3.5.82.2 Semantics of the service primitive
9.3.5.82.3 When generated
9.3.5.82.4 Effect of receipt
9.3.5.83 MLME-NEWCONNECTION.request
9.3.5.83.1 Function
854 9.3.5.83.2 Semantics of the service primitive
9.3.5.83.3 When generated
9.3.5.83.4 Effect of receipt
9.3.5.84 MLME-NEWCONNECTION.confirm
9.3.5.84.1 Function
855 9.3.5.84.2 Semantics of the service primitive
9.3.5.84.3 When generated
9.3.5.84.4 Effect of receipt
856 9.3.5.85 MLME-RELEASECONNECTION.indication
9.3.5.85.1 Function
9.3.5.85.2 Semantics of the service primitive
9.3.5.85.3 When generated
9.3.5.85.4 Effect of receipt
857 9.3.5.86 MLME-RELEASECONNECTION.response
9.3.5.86.1 Function
9.3.5.86.2 Semantics of the service primitive
9.3.5.86.3 When generated
9.3.5.86.4 Effect of receipt
9.3.5.87 MLME-MODIFYCONNECTION.request
9.3.5.87.1 Function
858 9.3.5.87.2 Semantics of the service primitive
9.3.5.87.3 When generated
9.3.5.87.4 Effect of receipt
9.3.5.88 MLME-MODIFYCONNECTION.confirm
9.3.5.88.1 Function
9.3.5.88.2 Semantics of the service primitive
859 9.3.5.88.3 When generated
9.3.5.88.4 Effect of receipt
9.3.5.89 MLME-CONNECTIONINFORMATION.request
9.3.5.89.1 Function
9.3.5.89.2 Semantics of the service primitive
860 9.3.5.89.3 When generated
9.3.5.89.4 Effect of receipt
9.3.5.90 MLME-CONNECTIONINFORMATION.confirm
9.3.5.90.1 Function
9.3.5.90.2 Semantics of the service primitive
861 9.3.5.90.3 When generated
9.3.5.90.4 Effect of receipt
9.3.5.91 MLME-NEWMULTIHOPCONNECTION.request
9.3.5.91.1 Function
862 9.3.5.91.2 Semantics of the service primitive
9.3.5.91.3 When generated
863 9.3.5.91.4 Effect of receipt
9.3.5.92 MLME-NEWMULTIHOPCONNECTION.confirm
9.3.5.92.1 Function
9.3.5.92.2 Semantics of the service primitive
9.3.5.92.3 When generated
9.3.5.92.4 Effect of receipt
9.3.5.93 MLME-STATIONCAPABILITY.request
9.3.5.93.1 Function
864 9.3.5.93.2 Semantics of the service primitive
9.3.5.93.3 When generated
9.3.5.93.4 Effect of receipt
9.3.5.94 MLME-STATIONCAPABILITY.confirm
9.3.5.94.1 Function
9.3.5.94.2 Semantics of the service primitive
865 9.3.5.94.3 When generated
9.3.5.94.4 Effect of receipt
866 9.3.5.95 MLME-NETWORKINFORMATION.request
9.3.5.95.1 Function
9.3.5.95.2 Semantics of the service primitive
9.3.5.95.3 When generated
9.3.5.95.4 Effect of receipt
9.3.5.96 MLME-NETWORKINFORMATION.confirm
9.3.5.96.1 Function
867 9.3.5.96.2 Semantics of the service primitive
868 9.3.5.96.3 When generated
9.3.5.96.4 Effect of receipt
9.3.5.97 MLME-NETWORKSTATISTICS.request
9.3.5.97.1 Function
9.3.5.97.2 Semantics of the service primitive
9.3.5.97.3 When generated
9.3.5.97.4 Effect of receipt
869 9.3.5.98 MLME-NETWORKSTATISTICS.confirm
9.3.5.98.1 Function
9.3.5.98.2 Semantics of the service primitive
870 9.3.5.98.3 When generated
9.3.5.98.4 Effect of receipt
9.3.5.99 MLME-GETBEACON.request
9.3.5.99.1 Function
9.3.5.99.2 Semantics of the service primitive
9.3.5.99.3 When generated
9.3.5.99.4 Effect of receipt
9.3.5.100 MLME-GETBEACON.confirm
9.3.5.100.1 Function
871 9.3.5.100.2 Semantics of the service primitive
9.3.5.100.3 When generated
9.3.5.100.4 Effect of receipt
9.3.5.101 MLME-HUMANFRIENDLYID.request
9.3.5.101.1 Function
9.3.5.101.2 Semantics of the service primitive
872 9.3.5.101.3 When generated
9.3.5.101.4 Effect of receipt
9.3.5.102 MLME-HUMANFRIENDLYID.confirm
9.3.5.102.1 Function
9.3.5.102.2 Semantics of the service primitive
873 9.3.5.102.3 When generated
9.3.5.102.4 Effect of receipt
9.3.5.103 MLME-MANAGEMENTFRAMEERROR.indication
9.3.5.103.1 Function
9.3.5.103.2 Semantics of the service primitive
874 9.3.5.103.3 When generated
9.3.5.103.4 Effect of receipt
9.3.5.104 MLME-LINKSTATISTICS.request
9.3.5.104.1 Function
9.3.5.104.2 Semantics of the service primitive
875 9.3.5.104.3 When generated
9.3.5.104.4 Effect of receipt
9.3.5.105 MLME-LINKSTATISTICS.confirm
9.3.5.105.1 Function
876 9.3.5.105.2 Semantics of the service primitive
879 9.3.5.105.3 When generated
9.3.5.105.4 Effect of receipt
9.3.6 Connection and link control
9.3.6.1 MLME-APCM_CONN_ADD.request
9.3.6.1.1 Function
9.3.6.1.2 Semantics of the service primitive
880 9.3.6.1.3 When generated
9.3.6.1.4 Effect of receipt
9.3.6.2 MLME-APCM_CONN_ADD.confirm
9.3.6.2.1 Function
9.3.6.2.2 Semantics of the service primitive
881 9.3.6.2.3 When generated
9.3.6.2.4 Effect of receipt
9.3.6.3 MLME-APCM_CONN_ADD.indication
9.3.6.3.1 Function
9.3.6.3.2 Semantics of the service primitive
9.3.6.3.3 When generated
882 9.3.6.3.4 Effect of receipt
9.3.6.4 MLME-APCM_CONN_ADD.response
9.3.6.4.1 Function
9.3.6.4.2 Semantics of the service primitive
9.3.6.4.3 When generated
9.3.6.4.4 Effect of receipt
9.3.6.5 MLME-APCM_CONN_MOD.request
9.3.6.5.1 Function
883 9.3.6.5.2 Semantics of the service primitive
9.3.6.5.3 When generated
9.3.6.5.4 Effect of receipt
9.3.6.6 MLME-APCM_CONN_MOD.confirm
9.3.6.6.1 Function
9.3.6.6.2 Semantics of the service primitive
884 9.3.6.6.3 When generated
9.3.6.6.4 Effect of receipt
9.3.6.7 MLME-APCM_CONN_MOD.indication
9.3.6.7.1 Function
9.3.6.7.2 Semantics of the service primitive
9.3.6.7.3 When generated
885 9.3.6.7.4 Effect of receipt
9.3.6.8 MLME-APCM_CONN_MOD.response
9.3.6.8.1 Function
9.3.6.8.2 Semantics of the service primitive
9.3.6.8.3 When generated
9.3.6.8.4 Effect of receipt
9.3.6.9 MLME-APCM_CONN_REL.request
9.3.6.9.1 Function
886 9.3.6.9.2 Semantics of the service primitive
9.3.6.9.3 When generated
9.3.6.9.4 Effect of receipt
9.3.6.10 MLME-APCM_CONN_REL.confirm
9.3.6.10.1 Function
9.3.6.10.2 Semantics of the service primitive
9.3.6.10.3 When generated
9.3.6.10.4 Effect of receipt
9.3.6.11 MLME-APCM_CONN_REL.indication
9.3.6.11.1 Function
887 9.3.6.11.2 Semantics of the service primitive
9.3.6.11.3 When generated
9.3.6.11.4 Effect of receipt
9.3.6.12 MLME-APCN_CONN_ADD.request
9.3.6.12.1 Function
888 9.3.6.12.2 Semantics of the service primitive
9.3.6.12.3 When generated
9.3.6.12.4 Effect of receipt
9.3.6.13 MLME-APCN_CONN_ADD.confirm
9.3.6.13.1 Function
889 9.3.6.13.2 Semantics of the service primitive
9.3.6.13.3 When generated
9.3.6.13.4 Effect of receipt
9.3.6.14 MLME-APCN_CONN_ADD.indication
9.3.6.14.1 Function
890 9.3.6.14.2 Semantics of the service primitive
9.3.6.14.3 When generated
9.3.6.14.4 Effect of receipt
9.3.6.15 MLME-APCN_CONN_ADD.response
9.3.6.15.1 Function
9.3.6.15.2 Semantics of the service primitive
891 9.3.6.15.3 When generated
9.3.6.15.4 Effect of receipt
9.3.6.16 MLME-APCN_CONN_MOD.request
9.3.6.16.1 Function
9.3.6.16.2 Semantics of the service primitive
9.3.6.16.3 When generated
9.3.6.16.4 Effect of receipt
892 9.3.6.17 MLME-APCN_CONN_MOD.confirm
9.3.6.17.1 Function
9.3.6.17.2 Semantics of the service primitive
9.3.6.17.3 When generated
9.3.6.17.4 Effect of receipt
893 9.3.6.18 MLME-APCN_CONN_MOD.indication
9.3.6.18.1 Function
9.3.6.18.2 Semantics of the service primitive
9.3.6.18.3 When generated
9.3.6.18.4 Effect of receipt
9.3.6.19 MLME-APCN_CONN_MOD.response
9.3.6.19.1 Function
9.3.6.19.2 Semantics of the service primitive
894 9.3.6.19.3 When generated
9.3.6.19.4 Effect of receipt
9.3.6.20 MLME-APCN_CONN_REL.request
9.3.6.20.1 Function
9.3.6.20.2 Semantics of the service primitive
9.3.6.20.3 When generated
9.3.6.20.4 Effect of receipt
895 9.3.6.21 MLME-APCN_CONN_REL.confirm
9.3.6.21.1 Function
9.3.6.21.2 Semantics of the service primitive
9.3.6.21.3 When generated
9.3.6.21.4 Effect of receipt
9.3.6.22 MLME-APCN_CONN_REL.indication
9.3.6.22.1 Function
9.3.6.22.2 Semantics of the service primitive
896 9.3.6.22.3 When generated
9.3.6.22.4 Effect of receipt
9.3.6.23 MLME-APGE_GET_SERVICE_SPEC.request
9.3.6.23.1 Function
9.3.6.23.2 Semantics of the service primitive
9.3.6.23.3 When generated
9.3.6.23.4 Effect of receipt
897 9.3.6.24 MLME-APGE_GET_SERVICE_SPEC.confirm
9.3.6.24.1 Function
9.3.6.24.2 Semantics of the service primitive
9.3.6.24.3 When generated
9.3.6.24.4 Effect of receipt
9.3.6.25 MLME-APGE_SET_SERVICE_SPEC.request
9.3.6.25.1 Function
9.3.6.25.2 Semantics of the service primitive
898 9.3.6.25.3 When generated
9.3.6.25.4 Effect of receipt
9.3.6.26 MLME-APGE_SET_SERVICE_SPEC.confirm
9.3.6.26.1 Function
9.3.6.26.2 Semantics of the service primitive
9.3.6.26.3 When generated
9.3.6.26.4 Effect of receipt
9.3.6.27 MLME-APCM_LINK_STATS.request
9.3.6.27.1 Function
899 9.3.6.27.2 Semantics of the service primitive
9.3.6.27.3 When generated
9.3.6.27.4 Effect of receipt
9.3.6.28 MLME-APCM_LINK_STATS.confirm
9.3.6.28.1 Function
9.3.6.28.2 Semantics of the service primitive
9.3.6.28.3 When generated
900 9.3.6.28.4 Effect of receipt
9.3.6.29 MLME-APGE_LINK_STATS.request
9.3.6.29.1 Function
9.3.6.29.2 Semantics of the service primitive
9.3.6.29.3 When generated
9.3.6.29.4 Effect of receipt
9.3.6.30 MLME-APGE_LINK_STATS.confirm
9.3.6.30.1 Function
901 9.3.6.30.2 Semantics of the service primitive
9.3.6.30.3 When generated
9.3.6.30.4 Effect of receipt
9.3.7 FFT access network discovery
9.3.7.1 MLME-ACCESSSCAN.request
9.3.7.1.1 Function
9.3.7.1.2 Semantics of the service primitive
902 9.3.7.1.3 When generated
9.3.7.1.4 Effect of receipt
9.3.7.2 MLME-ACCESSSCAN.confirm
9.3.7.2.1 Function
9.3.7.2.2 Semantics of the service primitive
904 9.3.7.2.3 When generated
9.3.7.2.4 Effect of receipt
9.3.8 In-home network control
9.3.8.1 MLME-SETNETWORKS.request
9.3.8.1.1 Function
9.3.8.1.2 Semantics of the service primitive
9.3.8.1.3 When generated
9.3.8.1.4 Effect of receipt
905 9.3.8.2 MLME-SETNETWORKS.confirm
9.3.8.2.1 Function
9.3.8.2.2 Semantics of the service primitive
9.3.8.2.3 When generated
9.3.8.2.4 Effect of receipt
9.3.8.3 MLME-APCM_NET_EXIT.request
9.3.8.3.1 Function
9.3.8.3.2 Semantics of the service primitive
9.3.8.3.3 When generated
9.3.8.3.4 Effect of receipt
9.3.8.4 MLME-APCM_NET_EXIT.confirm
9.3.8.4.1 Function
906 9.3.8.4.2 Semantics of the service primitive
9.3.8.4.3 When generated
9.3.8.4.4 Effect of receipt
9.3.8.5 MLME-NETWORKINFO.request
9.3.8.5.1 Function
9.3.8.5.2 Semantics of the service primitive
9.3.8.5.3 When generated
9.3.8.5.4 Effect of receipt
9.3.8.6 MLME-NETWORKINFO.confirm
9.3.8.6.1 Function
907 9.3.8.6.2 Semantics of the service primitive
9.3.8.6.3 When generated
9.3.8.6.4 Effect of receipt
9.3.8.7 MLME-APCM_GET_BEACON.request
9.3.8.7.1 Function
9.3.8.7.2 Semantics of the service primitive
9.3.8.7.3 When generated
9.3.8.7.4 Effect of receipt
9.3.8.8 MLME-APCM_GET_BEACON.confirm
9.3.8.8.1 Function
9.3.8.8.2 Semantics of the service primitive
908 9.3.8.8.3 When generated
9.3.8.8.4 Effect of receipt
9.3.8.9 MLME-APGE_GET_BEACONS.request
9.3.8.9.1 Function
9.3.8.9.2 Semantics of the service primitive
9.3.8.9.3 When generated
9.3.8.9.4 Effect of receipt
9.3.8.10 MLME-APGE_GET_BEACONS.confirm
9.3.8.10.1 Function
9.3.8.10.2 Semantics of the service primitive
9.3.8.10.3 When generated
9.3.8.10.4 Effect of receipt
909 9.3.8.11 MLME-DISCOVERLIST.request
9.3.8.11.1 Function
9.3.8.11.2 Semantics of the service primitive
9.3.8.11.3 When generated
9.3.8.11.4 Effect of receipt
9.3.8.12 MLME-DISCOVERLIST.confirm
9.3.8.12.1 Function
9.3.8.12.2 Semantics of the service primitive
910 9.3.8.12.3 When generated
9.3.8.12.4 Effect of receipt
9.3.9 Station control
9.3.9.1 MLME-APCM_GET_NTB.request
9.3.9.1.1 Function
9.3.9.1.2 Semantics of the service primitive
9.3.9.1.3 When generated
9.3.9.1.4 Effect of receipt
9.3.9.2 MLME-APCM_GET_NTB.confirm
9.3.9.2.1 Function
911 9.3.9.2.2 Semantics of the service primitive
9.3.9.2.3 When generated
9.3.9.2.4 Effect of receipt
9.3.9.3 MLME-APGE_GET_NTB.request
9.3.9.3.1 Function
9.3.9.3.2 Semantics of the service primitive
9.3.9.3.3 When generated
9.3.9.3.4 Effect of receipt
9.3.9.4 MLME-APGE_GET_NTB.confirm
9.3.9.4.1 Function
912 9.3.9.4.2 Semantics of the service primitive
9.3.9.4.3 When generated
9.3.9.4.4 Effect of receipt
9.3.9.5 MLME-APCM_GET_NEWSTA.request
9.3.9.5.1 Function
9.3.9.5.2 Semantics of the service primitive
9.3.9.5.3 When generated
9.3.9.5.4 Effect of receipt
9.3.9.6 MLME-APCM_GET_NEWSTA.confirm
9.3.9.6.1 Function
913 9.3.9.6.2 Semantics of the service primitive
9.3.9.6.3 When generated
9.3.9.6.4 Effect of receipt
9.3.9.7 MLME-APCM_GET_NEWSTA.indication
9.3.9.7.1 Function
9.3.9.7.2 Semantics of the service primitive
914 9.3.9.7.3 When generated
9.3.9.7.4 Effect of receipt
9.3.9.8 MLME-APNC_GET_NEWSTA.request
9.3.9.8.1 Function
9.3.9.8.2 Semantics of the service primitive
9.3.9.8.3 When generated
9.3.9.8.4 Effect of receipt
9.3.9.9 MLME-APNC_GET_NEWSTA.confirm
9.3.9.9.1 Function
915 9.3.9.9.2 Semantics of the service primitive
9.3.9.9.3 When generated
9.3.9.9.4 Effect of receipt
9.3.9.10 MLME-APNC_GET_NEWSTA.indication
9.3.9.10.1 Function
9.3.9.10.2 Semantics of the service primitive
916 9.3.9.10.3 When generated
9.3.9.10.4 Effect of receipt
9.3.9.11 MLME-APCM_STA_RESTART.request
9.3.9.11.1 Function
9.3.9.11.2 Semantics of the service primitive
9.3.9.11.3 When generated
9.3.9.11.4 Effect of receipt
9.3.9.12 MLME-APCM_STA_RESTART.confirm
9.3.9.12.1 Function
9.3.9.12.2 Semantics of the service primitive
917 9.3.9.12.3 When generated
9.3.9.12.4 Effect of receipt
9.3.9.13 MLME-APCM_STA_CAP.request
9.3.9.13.1 Function
9.3.9.13.2 Semantics of the service primitive
9.3.9.13.3 When generated
9.3.9.13.4 Effect of receipt
9.3.9.14 MLME-APCM_STA_CAP.confirm
9.3.9.14.1 Function
9.3.9.14.2 Semantics of the service primitive
9.3.9.14.3 When generated
9.3.9.14.4 Effect of receipt
918 9.3.9.15 MLME-APGE_STA_CAP.request
9.3.9.15.1 Function
9.3.9.15.2 Semantics of the service primitive
9.3.9.15.3 When generated
9.3.9.15.4 Effect of receipt
9.3.9.16 MLME-APGE_STA_CAP.confirm
9.3.9.16.1 Function
9.3.9.16.2 Semantics of the service primitive
9.3.9.16.3 When generated
9.3.9.16.4 Effect of receipt
9.3.9.17 MLME-APCM_GET_HFID.request
9.3.9.17.1 Function
9.3.9.17.2 Semantics of the service primitive
9.3.9.17.3 When generated
919 9.3.9.17.4 Effect of receipt
9.3.9.18 MLME-APGE_Name/HFID.request
9.3.9.18.1 Function
9.3.9.18.2 Semantics of the service primitive
9.3.9.18.3 When generated
9.3.9.18.4 Effect of receipt
9.3.9.19 MLME-GET_HFID.confirm
9.3.9.19.1 Function
9.3.9.19.2 Semantics of the service primitive
9.3.9.19.3 When generated
9.3.9.19.4 Effect of receipt
9.3.9.20 MLME-APCM_SET_HFID.request
9.3.9.20.1 Function
920 9.3.9.20.2 Semantics of the service primitive
9.3.9.20.3 When generated
9.3.9.20.4 Effect of receipt
9.3.9.21 MLME-APCM_SET_HFID.confirm
9.3.9.21.1 Function
9.3.9.21.2 Semantics of the service primitive
9.3.9.21.3 When generated
9.3.9.21.4 Effect of receipt
9.3.9.22 MLME-APGE_CHAN_USE.request
9.3.9.22.1 Function
9.3.9.22.2 Semantics of the service primitive
921 9.3.9.22.3 When generated
9.3.9.22.4 Effect of receipt
9.3.9.23 MLME-APGE_CHAN_USE.confirm
9.3.9.23.1 Function
9.3.9.23.2 Semantics of the service primitive
922 9.3.9.23.3 When generated
9.3.9.23.4 Effect of receipt
9.3.10 Reset
9.3.10.1 MLME-RESET.request
9.3.10.1.1 Function
9.3.10.1.2 Semantics of the service primitive
9.3.10.1.3 When generated
9.3.10.1.4 Effect of receipt
9.3.10.2 MLME-RESET.confirm
9.3.10.2.1 Function
923 9.3.10.2.2 Semantics of the service primitive
9.3.10.2.3 When generated
9.3.10.2.4 Effect of receipt
9.3.11 Start
9.3.11.1 MLME-START.request
9.3.11.1.1 Function
9.3.11.1.2 Semantics of the service primitive
924 9.3.11.1.3 When generated
9.3.11.1.4 Effect of receipt
9.3.11.2 MLME-START.confirm
9.3.11.2.1 Function
925 9.3.11.2.2 Semantics of the service primitive
9.3.11.2.3 When generated
9.3.11.2.4 Effect of receipt
9.3.12 Traffic stream (TS) management interface
9.3.12.1 MLME-ADDTS.request
9.3.12.1.1 Function
926 9.3.12.1.2 Semantics of the service primitive
927 9.3.12.1.3 When generated
9.3.12.1.4 Effect of receipt
9.3.12.2 MLME-ADDTS.confirm
9.3.12.2.1 Function
9.3.12.2.2 Semantics of the service primitive
928 9.3.12.2.3 When generated
9.3.12.2.4 Effect of receipt
9.3.12.3 MLME-ADDTS.indication
9.3.12.3.1 Function
9.3.12.3.2 Semantics of the service primitive
929 9.3.12.3.3 When generated
9.3.12.3.4 Effect of receipt
9.3.12.4 MLME-ADDTS.response
9.3.12.4.1 Function
930 9.3.12.4.2 Semantics of the service primitive
931 9.3.12.4.3 When generated
9.3.12.4.4 Effect of receipt
9.3.12.5 MLME-DELTS.request
9.3.12.5.1 Function
9.3.12.5.2 Semantics of the service primitive
9.3.12.5.3 When generated
9.3.12.5.4 Effect of receipt
932 9.3.12.6 MLME-DELTS.confirm
9.3.12.6.1 Function
9.3.12.6.2 Semantics of the service primitive
9.3.12.6.3 When generated
9.3.12.6.4 Effect of receipt
9.3.12.7 MLME-DELTS.indication
9.3.12.7.1 Function
933 9.3.12.7.2 Semantics of the service primitive
9.3.12.7.3 When generated
9.3.12.7.4 Effect of receipt
9.3.13 Classification Setup
9.3.13.1 MLME-ADDRULE.request
9.3.13.1.1 Function
934 9.3.13.1.2 Semantics of the service primitive
9.3.13.1.3 When generated
935 9.3.13.1.4 Effect of receipt
9.3.13.2 MLME-ADDRULE.confirm
9.3.13.2.1 Function
9.3.13.2.2 Semantics of the service primitive
9.3.13.2.3 When generated
9.3.13.2.4 Effect of receipt
9.3.13.3 MLME-DELRULES.request
9.3.13.3.1 Function
936 9.3.13.3.2 Semantics of the service primitive
9.3.13.3.3 When generated
9.3.13.3.4 Effect of receipt
9.3.13.4 MLME-DELRULES.confirm
9.3.13.4.1 Function
9.3.13.4.2 Semantics of the service primitive
937 9.3.13.4.3 When generated
9.3.13.4.4 Effect of receipt
9.3.13.5 MLME-FINDRULES.request
9.3.13.5.1 Function
9.3.13.5.2 Semantics of the service primitive
938 9.3.13.5.3 When generated
9.3.13.5.4 Effect of receipt
9.3.13.6 MLME-FINDRULES.confirm
9.3.13.6.1 Function
9.3.13.6.2 Semantics of the service primitive
9.3.13.6.3 When generated
9.3.13.6.4 Effect of receipt
939 9.3.13.7 MLME-CLEARRULESET.request
9.3.13.7.1 Function
9.3.13.7.2 Semantics of the service primitive
9.3.13.7.3 When generated
9.3.13.7.4 Effect of receipt
9.3.13.8 MLME-CLEARRULESET.confirm
9.3.13.8.1 Function
9.3.13.8.2 Semantics of the service primitive
940 9.3.13.8.3 When generated
9.3.13.8.4 Effect of receipt
9.3.14 Asynchronous Data Negotiation Service
9.3.14.1 MLME-ADDTC.request
9.3.14.1.1 Function
9.3.14.1.2 Semantics of the service primitive
9.3.14.1.3 When generated
9.3.14.1.4 Effect of receipt
941 9.3.14.2 MLME-ADDTC.confirm
9.3.14.2.1 Function
9.3.14.2.2 Semantics of the service primitive
9.3.14.2.3 When generated
9.3.14.2.4 Effect of receipt
9.3.14.3 MLME-DELTC.request
9.3.14.3.1 Function
9.3.14.3.2 Semantics of the service primitive
942 9.3.14.3.3 When generated
9.3.14.3.4 Effect of receipt
9.3.14.4 MLME-DELTC.confirm
9.3.14.4.1 Function
9.3.14.4.2 Semantics of the service primitive
9.3.14.4.3 When generated
9.3.14.4.4 Effect of receipt
943 9.3.14.5 MLME-DELTC.indication
9.3.14.5.1 Function
9.3.14.5.2 Semantics of the service primitive
9.3.14.5.3 When generated
9.3.14.5.4 Effect of receipt
9.3.15 Power management
944 9.3.15.1 MLME-POWERMGT.request
9.3.15.1.1 Function
9.3.15.1.2 Semantics of the service primitive
9.3.15.1.3 When generated
9.3.15.1.4 Effect of receipt
9.3.15.2 MLME-POWERMGT.confirm
9.3.15.2.1 Function
9.3.15.2.2 Semantics of the service primitive
9.3.15.2.3 When generated
945 9.3.15.2.4 Effect of receipt
9.3.16 CX support
9.3.16.1 MLME-CXSLOT.request
9.3.16.1.1 Function
9.3.16.1.2 Semantics of the service primitive
9.3.16.1.3 When generated
9.3.16.1.4 Effect of receipt
9.3.16.2 MLME-CXSLOT.confirm
9.3.16.2.1 Function
946 9.3.16.2.2 Semantics of the service primitive
9.3.16.2.3 When generated
9.3.16.2.4 Effect of receipt
9.3.16.3 MLME-CXCHANNEL.request
9.3.16.3.1 Function
9.3.16.3.2 Semantics of the service primitive
9.3.16.3.3 When generated
947 9.3.16.3.4 Effect of receipt
9.3.16.4 MLME-CXCHANNEL.confirm
9.3.16.4.1 Function
9.3.16.4.2 Semantics of the service primitive
9.3.16.4.3 When generated
9.3.16.4.4 Effect of receipt
9.3.17 Vendor-specific services
9.3.17.1 MLME-VENDORSPECIFIC.request
9.3.17.1.1 Function
9.3.17.1.2 Semantics of the service primitive
948 9.3.17.1.3 When generated
9.3.17.1.4 Effect of receipt
9.3.17.2 MLME-VENDORSPECIFIC.confirm
9.3.17.2.1 Function
9.3.17.2.2 Semantics of the service primitive
9.3.17.2.3 When generated
949 9.3.17.2.4 Effect of receipt
9.3.17.3 MLME-VENDORSPECIFIC.indication
9.3.17.3.1 Function
9.3.17.3.2 Semantics of the service primitive
9.3.17.3.3 When generated
9.3.17.3.4 Effect of receipt
9.4 PLME SAP interface
9.4.1 Tone Map Control
9.4.1.1 PLME-SETTONEMASK.request
950 9.4.1.2 PLME-SETTONEMASK.confirm
951 9.4.1.3 PLME-SETAMPLITUDEMAP.request
9.4.1.3.1 Function
9.4.1.4 PLME-SETAMPLITUDEMAP.confirm
9.4.1.4.1 Function
952 9.4.1.4.2 Semantics of the service primitive
9.4.1.4.3 When generated
9.4.1.4.4 Effect of receipt
9.4.2 Reset
9.4.2.1 Reset by PLME service
9.4.2.2 PLME-RESET.request
9.4.2.2.1 Function
9.4.2.2.2 Semantics of the service primitive
9.4.2.2.3 When generated
9.4.2.2.4 Effect of receipt
953 9.4.3 PHY-dependent characteristics
9.4.3.1 PLME-CHARACTERISTICS.request
9.4.3.1.1 Function
9.4.3.1.2 Semantics of the service primitive
9.4.3.1.3 When generated
9.4.3.1.4 Effect of receipt
9.4.3.2 PLME-CHARACTERISTICS.confirm
9.4.3.2.1 Function
9.4.3.2.2 Semantics of the service primitive
955 9.4.3.2.3 When generated
9.4.3.2.4 Effect of receipt
9.4.4 TXTIME Calculation
9.4.4.1 PLME-TXTIME.request
9.4.4.1.1 Function
9.4.4.1.2 Semantics of the service primitive
956 9.4.4.1.3 When generated
9.4.4.1.4 Effect of receipt
9.4.4.2 PLME-TXTIME.confirm
9.4.4.2.1 Function
9.4.4.2.2 Semantics of the service primitive
9.4.4.2.3 When generated
9.4.4.2.4 Effect of receipt
10 MLME
10.1 Synchronization
10.1.1 Network time base (NTB) synchronization function
957 10.1.2 FFT in-home synchronization
10.1.2.1 Accuracy
958 10.1.2.1.1 BTS in Proxy Beacons
10.1.2.1.2 BTS in Discover Beacons
10.1.2.2 PHY clock correction
10.1.2.2.1 PHY clock correction when participating in more than one network
959 10.1.2.2.2 Allocation boundaries
10.1.3 FFT access system synchronization
960 10.1.3.1 BTS in repeater access beacons
961 10.1.3.2 Arrival Timestamp for MSDU jitter and delay control
10.1.3.3 PHY clock correction
10.1.4 Wavelet PHY/MAC in-home and access synchronization
10.1.4.1 Maintaining NTB synchronization
962 10.1.4.2 Accuracy
10.1.4.3 BSS synchronization function
10.1.4.3.1 BSF
10.1.4.3.2 Maintaining synchronization
10.1.4.3.3 Beacon generation in BSS
963 10.1.4.4 Beacon synchronization among BSSs
964 10.2 Power management
10.2.1 FFT in-home network power save
965 10.2.2 FFT access network power management
10.2.2.1 Centralized FFT power management
10.2.2.1.1 Core cell STA’s behavior
10.2.2.1.2 CPE’s behavior
966 10.2.2.1.3 Exiting the power save mode
10.2.2.2 Distributed FFT power management
967 10.2.2.2.1 Going into sleep mode
10.2.2.2.2 Normal wake up
968 10.2.2.2.3 Urgent wake up
10.2.2.2.4 Sleep and awake transitions
10.2.3 Wavelet in-home and access higher layer controlled power save
10.3 Forming and joining an FFT in-home network
10.3.1 BSS overview
969 10.3.1.1 Network identification
10.3.1.2 Human-friendly station and BSS names
10.3.1.3 Get full BSS information
970 10.3.1.4 Get full STA information
10.3.2 Power-on network discovery procedure
972 10.3.3 STA behavior after power-on
10.3.3.1 Unassociated STA behavior
973 10.3.3.2 Unassociated BM behavior
10.3.3.3 Behavior as a STA in a BSS
974 10.3.3.4 Behavior as a BM in a BSS
975 10.3.3.5 Deciding 1901 FFT-only or extended header network mode
10.3.4 Association
976 10.3.4.1 TEI assignment and renewal
977 10.3.4.2 Disambiguated TEIs
10.3.4.3 TEI leases and renewals
978 10.3.4.4 When to stop using a TEI
10.3.4.5 Updating STAs with the TEI map
10.3.4.6 Disassociation
979 10.3.5 DSN-based authentication and authorization
10.3.5.1 Authentication
10.3.5.2 Forming a new BSS
10.3.5.2.1 Two unassociated STAs with matching NIDs
981 10.3.5.2.2 Two unassociated STAs form a BSS using a DAK-based authorization
10.3.5.2.3 Two unassociated STAs—One in SC-add and one in SC-join
982 10.3.5.2.4 Two unassociated STAs—Both in SC-join
983 10.3.5.3 Joining an existing BSS
10.3.5.3.1 Matching NIDs
984 10.3.5.3.2 DAK-encrypted NMK
10.3.5.3.3 SC-join and SC-add
985 10.3.5.4 Removing a station from a BSS
10.4 Forming and joining an FFT access network
10.4.1 Power-on network discovery procedure
986 10.4.1.1 Core cell association
988 10.4.1.1.1 TEI renewal
10.4.1.2 Leaving the core cell
989 10.4.1.3 Access subcell association
991 10.4.1.3.1 TEI renewal
10.4.1.4 Leaving the access subcell
992 10.4.1.5 NTU failure handling
10.4.2 FFT forming or joining a BSS
10.4.2.1 Forming or joining access core cell
10.4.2.1.1 Core cell association
993 10.4.2.1.2 Authorization
994 10.4.2.1.3 Authentication
10.4.2.1.3.1 Updating the NEK
995 10.4.2.1.4 Leaving the core cell
10.4.2.2 Joining an access subcell
10.4.2.2.1 Access subcell association
10.4.2.2.2 Authorization
996 10.4.2.2.2.1 In-band service sign-up
10.4.2.2.2.2 Distribution of NMK to the CPE
10.4.2.2.2.2.1 NMK distribution during service sign-up
997 10.4.2.2.2.2.2 DAK-based distribution of NMK to CPE
10.4.2.2.2.3 Distribution of NMK to NTUs
999 10.4.2.2.3 Authentication
1000 10.4.2.2.3.1 Updating the NEK
10.4.2.2.4 Leaving the access subcell
10.4.2.2.5 Overview of CPE joining an access network
1001 10.4.2.3 In-home STA joining the in-home subcell
1002 10.4.2.3.1 Association
10.4.2.3.2 Authorization
10.4.2.3.3 Authentication
10.4.2.3.3.1 Updating the NEK
10.4.2.3.4 Leaving the network
10.4.2.4 Human-friendly station and access network names
10.4.2.5 Point-to-point security
1003 10.4.2.5.1 MAC address to TEI mapping
10.4.2.5.2 Authorization
1004 10.4.2.5.3 Authentication
10.4.2.5.3.1 Delivering the EEK
1005 10.4.2.5.3.2 EEK rotation
10.4.2.5.4 Issues related to point-to-point security
10.4.2.5.4.1 Collisions
10.4.2.5.4.2 EE_EKS not found
10.5 Forming and joining a wavelet in-home network or access network
10.5.1 Scanning
1006 10.5.1.1 Passive scanning
10.5.1.2 Active scanning
10.5.1.2.1 Sending a probe response
1007 10.5.1.2.2 Active scanning procedure
10.5.2 Beacon reception
1008 10.5.3 PSN-based station registration and authentication
10.5.3.1 Station registration
10.5.3.1.1 BMs
10.5.3.1.2 Non-BM STAs
10.5.3.2 Procedure for station authentication
10.5.3.2.1 Initial authentication
1011 10.5.3.2.2 Reauthentication
1012 10.5.3.3 Procedure for deauthentication
10.5.3.3.1 Deauthentication by non-BM station
1013 10.5.3.3.2 Deauthentication by BM
10.5.3.3.2.1 Deauthentication notification specifying a STA (using broadcast)
1014 10.5.3.3.2.2 Deauthentication notification specifying a STA (using unicast)
1015 10.5.3.3.2.3 Deauthentication notification for all non-BM STAs
1016 10.6 FFT in-home traffic streams
10.6.1 Connections, links, and streams
10.6.1.1 Connections and links
1017 10.6.1.1.1 Global links
10.6.1.1.2 Local links
10.6.1.1.3 Connectionless “links”
10.6.1.1.4 Link and connection identifiers
1018 10.6.1.1.4.1 Link identifiers
10.6.1.1.4.2 Assignment of LIDs
1019 10.6.1.1.4.3 Connection identifiers
1020 10.6.1.1.5 Transport services
10.6.1.1.5.1 Connectionless service (CLS)
10.6.1.1.5.2 Connection-oriented service (COS)
10.6.2 Traffic stream reservation procedures
10.6.2.1 Pre-negotiation oriented reservations
10.6.2.1.1 Connection services
1021 10.6.2.1.1.1 Connection setup
1023 10.6.2.1.1.2 Global link setup
10.6.2.1.1.3 Latency effects on global link setup
10.6.2.1.1.4 Connection monitoring
10.6.2.1.1.4.1 CM behavior under inactivity interval
1024 10.6.2.1.1.5 Connection teardown
1026 10.6.2.1.1.5.1 Latency effect on teardown frames
10.6.2.1.1.5.2 Hostile connection teardown
10.6.2.1.1.6 Connections and network modes
1027 10.6.2.1.1.7 Connection reconfiguration
1028 10.6.2.1.1.7.1 HLE- or autoconnect-initiated reconfiguration
10.6.2.1.1.7.2 CM-initiated reconfiguration
1029 10.6.2.1.1.8 Global link reconfiguration triggered by BM
10.6.2.1.1.8.1 Squeeze and de-squeeze
1030 10.6.2.1.2 Connection services for broadcast/multicast
1031 10.6.2.1.2.1 Broadcast/multicast connection using multiple unicast connections
10.6.2.1.3 Bandwidth manager
10.6.2.1.3.1 Scheduler and bandwidth allocation
1033 10.6.2.1.3.2 Connection admission control
10.6.2.1.3.3 Beacon interval configuration
10.6.3 FFT Traffic Stream Management
10.6.4 Traffic specification (TSPEC)
10.7 FFT access system traffic streams
1034 10.7.1 Traffic classes
1035 10.7.2 Connection setup
1036 10.7.2.1 Connection setup initiated by HE
1037 10.7.2.2 TDMA allocation setup
1038 10.7.2.3 TDMA allocation maintenance
1039 10.7.2.4 TDMA allocations and route changes
1040 10.7.3 Connection teardown
1041 10.7.3.1 Hostile connection teardown
10.7.4 Connection reconfiguration
1042 10.7.4.1 TDMA allocation reconfiguration
10.7.5 Bandwidth management
1043 10.7.5.1 Bandwidth allocation and admission control for connections
10.7.5.2 Bandwidth allocation and admission for control service level
10.7.5.2.1 Provisioning a CPE’s service level
1044 10.7.5.2.2 Service level enforcement and monitoring
10.7.5.2.3 Traffic throttling
1045 10.7.6 FFT traffic stream management
10.7.6.1 Autoconnect service
10.7.6.1.1 Evaluation of data flow
1046 10.7.6.1.2 ACS processing
10.7.6.1.2.1 Data flow evaluation
10.7.6.1.2.2 After data flow evaluation is complete
10.7.6.1.2.3 Monitoring automatic connections
1047 10.7.6.2 Smoothing (delay compensation, jitter control)
10.7.6.2.1 Point-to-point smoothing
10.7.6.2.2 End-to-end smoothing
10.7.6.2.3 Smoothing control
1048 10.7.7 Traffic specification (TSPEC)
1049 10.8 DFS procedures
1050 10.8.1 Association based on supported channels
1051 10.8.2 Quieting channels for testing
10.8.3 Testing channels for specific types of interference
10.8.3.1 Discontinuing operations after detecting specific interference patterns
10.8.3.2 Detecting specific interference patterns
10.8.4 Requesting and reporting measurements
1052 10.8.5 Selecting and advertising a new channel
1053 10.8.5.1 Selecting and advertising a new channel in a BSS
10.9 Wavelet in-home and access traffic streams
10.9.1 Streams and links
10.9.1.1 Stream
10.9.1.2 Link
1054 10.9.1.2.1 Reservation procedure
10.9.1.2.1.1 Time requirement calculation
10.9.1.2.1.2 Decision to accept/reject
10.9.1.2.1.3 Reservation sequence
1056 10.9.1.2.2 Release procedure
10.9.1.2.2.1 Normal bandwidth release procedure
1057 10.9.1.2.2.2 Bandwidth resource usage monitored by the BM
10.9.1.2.3 Bandwidth change procedure
1059 10.9.2 Traffic specification (TSPEC)
1060 10.10 Traffic classifiers
1061 10.10.1 Classifier configuration
10.10.2 Classifier rules
1063 10.10.3 Classifier rule set format
1064 10.10.4 Supported classifier rules
11 Multiple networks using the FFT PHY
11.1 Multiple in-home FFT networks (optional)
1065 11.1.1 Network modes
11.1.1.1 Overview of FFT network operation modes
11.1.1.2 Overview of FFT BM capability modes
11.1.1.2.1 CSMA-only mode
1067 11.1.1.2.2 Uncoordinated mode
1068 11.1.1.2.3 Coordinated mode
1070 11.1.1.2.4 Overview of beacon period structure
1071 11.1.1.2.5 Minimum CSMA region requirement
11.1.2 Coordinated mode
11.1.2.1 Interfering network list
1072 11.1.2.2 Group of networks
11.1.2.3 Determining a compatible schedule
11.1.2.3.1 Computing the INL allocation
1073 11.1.2.3.2 INL allocation rules
1074 11.1.2.4 Communication between neighboring BMs
1075 11.1.2.5 Neighbor network instantiation
11.1.2.5.1 Procedure to establish a new network in coordinated mode
1077 11.1.2.5.2 New network instantiation amid two groups of networks
1078 11.1.2.5.3 Changing the number of beacon slots
1079 11.1.2.5.4 Setting the value of SlotUsage field
1080 11.1.2.6 Procedure to share bandwidth in coordinated mode
1081 11.1.2.7 Scheduling policy
11.1.2.8 Procedure to release bandwidth
1082 11.1.2.9 Procedure to shut down a BSS
1083 11.1.2.10 AC line cycle synchronization in coordinated mode
11.1.3 Passive coordination in CSMA-only mode
11.1.4 Network mode transition
1084 11.1.4.1 Network mode of a newly established BSS
11.1.4.2 CSMA-only mode transitions
11.1.4.3 Uncoordinated mode transitions
1085 11.1.4.4 Coordinated mode transitions
1086 11.1.5 Neighboring networks with matching network IDs
11.2 Multiple access system FFT networks (optional)
1087 11.2.1 Multiple HE/core cell environments
1089 11.2.2 Multiple HE/core cell communication
1090 12 PHY service specification
12.1 Scope
12.2 PHY functions
12.3 Detailed PHY service specifications
12.3.1 Scope and field of application
12.3.2 Overview of the service
12.3.3 Overview of interactions
1091 12.3.4 Basic service and options
12.3.4.1 PHY-SAP peer-to-peer service primitives
12.3.4.2 PHY-SAP sublayer-to-sublayer service primitives
12.3.4.3 PHY-SAP service primitives parameters
1092 12.3.4.4 Vector descriptions
12.3.4.4.1 TXVECTOR description
12.3.4.4.1.1 TXVECTOR TMI_TX
12.3.4.4.1.2 TXVECTOR TMI_RX
12.3.4.4.1.3 TXVECTOR TEI
12.3.4.4.1.4 TXVECTOR HYBRID_FLAG
1093 12.3.4.4.1.5 TXVECTOR LENGTH
12.3.4.4.1.6 TXVECTOR TXPWR_LEVEL
12.3.4.4.1.7 TXVECTOR BIT_INT
12.3.4.4.1.8 TXVECTOR PILOT_SYM
12.3.4.4.1.9 TXVECTOR CLK_CORRECTION
12.3.4.4.1.10 TXVECTOR FEC_BLOCK_SIZE
12.3.4.4.2 PHY RXVECTOR description
12.3.4.4.2.1 RXVECTOR TMI
12.3.4.4.2.2 RXVECTOR TEI
1094 12.3.4.4.2.3 RXVECTOR HYBRID_FLAG
12.3.4.4.2.4 RXVECTOR LENGTH
12.3.4.4.2.5 RXVECTOR RSSI
12.3.4.4.2.6 RXVECTOR PHYCLK
12.3.5 PHY-SAP detailed service specification
12.3.5.1 PHY-DATA.request
12.3.5.1.1 Function
1095 12.3.5.1.2 Semantics of the service primitive
12.3.5.1.3 When generated
12.3.5.1.4 Effect of receipt
12.3.5.2 PHY-DATA.indication
12.3.5.2.1 Function
12.3.5.2.2 Semantics of the service primitive
12.3.5.2.3 When generated
12.3.5.2.4 Effect of receipt
1096 12.3.5.3 PHY-DATA.confirm
12.3.5.3.1 Function
12.3.5.3.2 Semantics of the service primitive
12.3.5.3.3 When generated
12.3.5.3.4 Effect of receipt
12.3.5.4 PHY-TXSTART.request
12.3.5.4.1 Function
12.3.5.4.2 Semantics of the service primitive
12.3.5.4.3 When generated
1097 12.3.5.4.4 Effect of receipt
12.3.5.5 PHY-TXSTART.confirm
12.3.5.5.1 Function
12.3.5.5.2 Semantics of the service primitive
12.3.5.5.3 When generated
12.3.5.5.4 Effect of receipt
12.3.5.6 PHY-TXEND.request
12.3.5.6.1 Function
12.3.5.6.2 Semantics of the service primitive
12.3.5.6.3 When generated
1098 12.3.5.6.4 Effect of receipt
12.3.5.7 PHY-TXEND.confirm
12.3.5.7.1 Function
12.3.5.7.2 Semantics of the service primitive
12.3.5.7.3 When generated
12.3.5.7.4 Effect of receipt
12.3.5.8 PHY-TXPRS.request
12.3.5.8.1 Function
12.3.5.8.2 Semantics of the service primitive
1099 12.3.5.8.3 When generated
12.3.5.8.4 Effect of receipt
12.3.5.9 PHY-TXPRS.confirm
12.3.5.9.1 Function
12.3.5.9.2 Semantics of the service primitive
12.3.5.9.3 When generated
12.3.5.9.4 Effect of receipt
12.3.5.10 PHY-TXISP.request
12.3.5.10.1 Function
12.3.5.10.2 Semantics of the service primitive
1100 12.3.5.10.3 When generated
12.3.5.10.4 Effect of receipt
12.3.5.11 PHY-TXISP.confirm
12.3.5.11.1 Function
12.3.5.11.2 Semantics of the service primitive
12.3.5.11.3 When generated
12.3.5.11.4 Effect of receipt
12.3.5.12 PHY-CCARESET.request
12.3.5.12.1 Function
12.3.5.12.2 Semantics of the service primitive
12.3.5.12.3 When generated
1101 12.3.5.12.4 Effect of receipt
12.3.5.13 PHY-CCARESET.confirm
12.3.5.13.1 Function
12.3.5.13.2 Semantics of the service primitive
12.3.5.13.3 When generated
12.3.5.13.4 Effect of receipt
12.3.5.14 PHY-CCA.indication
12.3.5.14.1 Function
12.3.5.14.2 Semantics of the service primitive
12.3.5.14.3 When generated
1102 12.3.5.14.4 Effect of receipt
12.3.5.15 PHY-RXSTART.indication
12.3.5.15.1 Function
12.3.5.15.2 Semantics of the service primitive
12.3.5.15.3 When generated
12.3.5.15.4 Effect of receipt
12.3.5.16 PHY-RXEND.indication
12.3.5.16.1 Function
1103 12.3.5.16.2 Semantics of the service primitive
12.3.5.16.3 When generated
12.3.5.16.4 Effect of receipt
12.3.5.17 PHY-RXPRS.request
12.3.5.17.1 Function
12.3.5.17.2 Semantics of the service primitive
1104 12.3.5.17.3 When generated
12.3.5.17.4 Effect of receipt
12.3.5.18 PHY-RXPRS.confirm
12.3.5.18.1 Function
12.3.5.18.2 Semantics of the service primitive
12.3.5.18.3 When generated
12.3.5.18.4 Effect of Receipt
12.3.5.19 PHY-RXISP.request
12.3.5.19.1 Function
12.3.5.19.2 Semantics of the service primitive
1105 12.3.5.19.3 When generated
12.3.5.19.4 Effect of receipt
12.3.5.20 PHY-RXISP.confirm
12.3.5.20.1 Function
12.3.5.20.2 Semantics of the service primitive
12.3.5.20.3 When generated
12.3.5.20.4 Effect of Receipt
12.3.5.21 PHY-SEARCHPPDU.request
12.3.5.21.1 Function
12.3.5.21.2 Semantics of the service primitive
1106 12.3.5.21.3 When generated
12.3.5.21.4 Effect of receipt
13 FFT physical layer
13.1 Physical layer convergence protocol (PLCP)
13.1.1 In-home MAC parameters
1107 13.1.2 Access MAC parameters
1108 13.2 FFT system
1109 13.2.1 FFT outline description
1110 13.2.2 FFT PHY frames
13.2.3 FFT PHY functions
1111 13.2.3.1 PLCP sublayer
13.2.3.2 PMD sublayer
13.2.3.3 PLME
13.2.3.4 Service specification method
13.3 Cyclic redundancy check calculation
13.3.1 CRC-32
1112 13.3.2 CRC-24
13.4 PPDU structure and generation
13.4.1 PPDU formats
1113 13.4.2 PPDU structure
1114 13.4.3 Symbol timing
1115 13.5 TIA-1113 frame control FEC
13.5.1 Product encoder
1116 13.5.2 Frame control interleaving
1119 13.5.3 TIA-1113 tone mask
13.6 Frame control forward error correction
13.6.1 Frame control bits flow
1120 13.6.2 Turbo-convolutional code encoder
13.6.3 FFT frame control interleaver
13.6.4 Diversity copier
1121 13.7 Payload forward error correction (FEC) processing
13.7.1 Scrambler
1122 13.7.2 Turbo-convolutional encoder
13.7.2.1 Constituent encoders
13.7.2.2 Termination
1123 13.7.2.3 Puncturing
1124 13.7.2.4 Turbo interleaving
1125 13.7.3 Channel interleaver
1127 13.7.4 ROBO modes
1128 13.7.4.1 ROBO interleaver
1130 13.8 Mapping
13.8.1 Empty tone filling
1131 13.8.2 Last symbol padding
1132 13.8.3 Mapping reference
1138 13.8.4 Mapping for FFT frame control coherent QPSK
1139 13.8.5 Mapping for BPSK, QPSK, 8-QAM, 16-QAM, 64-QAM, 256-QAM, 1024-QAM, and 4096-QAM
1142 13.8.6 Mapping for ROBO-FFT
13.9 Symbol generation
13.9.1 Preamble
1146 13.9.2 TIA-1113 frame control
1147 13.9.3 Full 1901 frame control
13.9.4 Payload symbols
1148 13.9.5 Priority resolution symbol
1149 13.9.6 Relative power levels
13.9.7 Tone mask
1151 13.9.8 Amplitude map
1152 13.10 Transmitter electrical specification
13.10.1 Transmit spectrum mask
1153 13.10.2 Spurious transmission
13.10.3 Transmitter accuracy
13.10.3.1 PHY clock frequency tolerance
13.10.3.2 Transmit constellation error
13.10.4 Transmit modulation accuracy test
1154 13.10.4.1 Transmit modulation Frame Control TIA-1113 accuracy test
1155 13.10.4.2 Transmit modulation Frame Control FFT and PPDU data accuracy tests
1156 13.10.4.3 Transmit Preamble Distortion Test
1157 13.10.4.4 Transmit Priority Resolution Symbol Accuracy
1158 13.11 Receiver electrical specification
13.11.1 Receiver sensitivity
13.11.1.1 Receiver minimum input voltage
13.11.1.2 Receiver maximum input voltage
13.11.2 Receiver input impedance
1159 13.11.3 Immunity to narrowband interference
13.11.4 Physical carrier sense
13.11.4.1 Detection of priority resolution symbols
13.11.4.2 Detection of preamble symbols
1160 13.12 PMD sublayer service
13.12.1 Scope and field of application
13.12.2 Overview of service
1161 13.12.3 Overview of interactions
13.12.4 Basic service and options
13.12.4.1 PMD_SAP peer-to-peer service primitives
13.12.4.2 PMD_SAP sublayer-to-sublayer service primitives
13.12.4.3 PMD_SAP service primitive parameters
1162 13.12.5 PMD_SAP detailed service specification
13.12.5.1 PMD_DATA.request
13.12.5.1.1 Function
13.12.5.1.2 Semantic of the service primitive
13.12.5.1.3 When generated
13.12.5.1.4 Effect of receipt
13.12.5.2 PMD_DATA.indication
13.12.5.2.1 Function
13.12.5.2.2 Semantic of the service primitive
13.12.5.2.3 When generated
1163 13.12.5.2.4 Effect of receipt
13.12.5.3 PMD_TXSTART.request
13.12.5.3.1 Function
13.12.5.3.2 Semantic of the service primitive
13.12.5.3.3 When generated
13.12.5.3.4 Effect of receipt
13.12.5.4 PMD_TXEND.request
13.12.5.4.1 Function
13.12.5.4.2 Semantic of the service primitive
13.12.5.4.3 When generated
13.12.5.4.4 Effect of receipt
1164 13.12.5.5 PMD_TX_TMI_T.request
13.12.5.5.1 Function
13.12.5.5.2 Semantic of the service primitive
13.12.5.5.3 When generated
13.12.5.5.4 Effect of receipt
13.12.5.6 PMD_TX_TMI_R.request
13.12.5.6.1 Function
13.12.5.6.2 Semantic of the service primitive
13.12.5.6.3 When generated
13.12.5.6.4 Effect of receipt
1165 13.12.5.7 PMD_RX_TMI.request
13.12.5.7.1 Function
13.12.5.7.2 Semantic of the service primitive
13.12.5.7.3 When generated
13.12.5.7.4 Effect of receipt
14 Single Channel Wavelet physical layer
14.1 Introduction
1166 14.1.1 Characteristics
14.1.2 PHY functions
14.1.2.1 PLCP sublayer
14.1.2.2 PMD sublayer
14.1.2.3 PLME
14.1.3 Service specification method
1167 14.1.4 SCW MAC parameters
1168 14.2 PLCP sublayer
14.2.1 Introduction
14.2.2 PLCP frame format
1169 14.2.2.1 Overview of the PPDU encoding/decoding process
1170 14.2.2.2 Modulation-dependent parameters
1172 14.3 PHY encoder
14.3.1 Generator for RCE frame
14.3.2 Scrambler
14.3.3 CRC encoder for FL
1173 14.3.4 Concatenated encoder
14.3.4.1 Reed–Solomon encoder
14.3.4.2 Convolutional encoder/puncturing
1174 14.3.5 Convolutional codes defined by low-density parity-check polynomials (optional)
1175 14.3.5.1 Polynomials for encoding LDPC-CCs
1179 14.3.5.2 Encoding termination
14.3.6 FEC type field
1180 14.3.7 Interleaver
14.3.7.1 Bit interleaver for one SCW OFDM symbol
14.3.7.2 Bit interleaver for multiple SCW OFDM symbols (optional)
1182 14.3.8 SCW process
14.3.8.1 Mapping
1183 14.3.8.1.1 2PAM, 4PAM, 8PAM, 16PAM, and optional 32PAM mapping
1187 14.3.8.1.2 Diversity mode
14.3.8.1.2.1 Frame control diversity mode
1188 14.3.8.1.2.2 TMI/FL diversity mode
14.3.8.1.2.3 Frame Body diversity mode
14.3.8.1.2.4 DOF mode
1189 14.3.8.1.2.5 D2PAM mode
14.3.8.2 Baseband symbol generation
1190 14.3.8.2.1 Ramp process
14.3.8.2.2 Short preamble (optional)
1191 14.3.8.2.3 Preamble
1192 14.3.8.2.4 TMI symbol
14.3.8.2.5 Frame control
1193 14.3.8.2.6 FL symbol
14.3.8.2.7 Frame Body
14.3.8.2.8 Frame Termination
1194 14.3.8.2.9 Postamble (optional)
14.3.8.2.10 Pilot symbol (optional)
1195 14.3.8.3 Bandpass symbol generation (optional)
14.3.8.3.1 Short preamble (optional)
1196 14.3.8.3.2 Preamble
14.3.8.3.3 TMI symbol
1197 14.3.8.3.4 Frame control
1198 14.3.8.3.5 FL symbol
14.3.8.3.6 Frame Body
1199 14.3.8.3.7 Frame termination
14.3.8.3.8 Postamble (optional)
1200 14.3.8.3.9 Pilot signal (optional)
1201 14.3.8.4 IDWT
1225 14.4 PMD
14.4.1 Block diagram of the SCW transmitter and receiver
1226 14.4.2 Major specifications
1227 14.4.3 Transmission relative power levels (Informative)
14.4.4 Transmission spectrum
1230 14.4.5 Notch and power control
1231 14.4.6 STA stand-alone dynamic notching (optional)
1232 14.4.7 System clock frequency tolerance
14.5 PLME
14.5.1 PLME-SAP sublayer management primitives
14.5.2 PHY MIB
1234 14.5.3 TXTIME calculation
14.6 PMD sublayer service
14.6.1 Scope and field of application
1235 14.6.2 Overview of service
14.6.3 Overview of interactions
14.6.4 Basic service and options
14.6.4.1 PMD_SAP peer-to-peer service primitives
14.6.4.2 PMD_SAP sublayer-to-sublayer service primitives
14.6.4.3 PMD_SAP service primitive parameters
1236 14.6.5 PMD_SAP detailed service specification
14.6.5.1 PMD_DATA.request
14.6.5.1.1 Function
14.6.5.1.2 Semantic of the service primitive
14.6.5.1.3 When generated
14.6.5.1.4 Effect of receipt
14.6.5.2 PMD_DATA.indication
14.6.5.2.1 Function
1237 14.6.5.2.2 Semantic of the service primitive
14.6.5.2.3 When generated
14.6.5.2.4 Effect of receipt
14.6.5.3 PMD_TXSTART.request
14.6.5.3.1 Function
14.6.5.3.2 Semantic of the service primitive
14.6.5.3.3 When generated
14.6.5.3.4 Effect of receipt
14.6.5.4 PMD_TXEND.request
14.6.5.4.1 Function
1238 14.6.5.4.2 Semantic of the service primitive
14.6.5.4.3 When generated
14.6.5.4.4 Effect of receipt
14.6.5.5 PMD_TX_TMI_T.request
14.6.5.5.1 Function
14.6.5.5.2 Semantic of the service primitive
14.6.5.5.3 When generated
14.6.5.5.4 Effect of receipt
14.6.5.6 PMD_TX_TMI_R.request
14.6.5.6.1 Function
1239 14.6.5.6.2 Semantic of the service primitive
14.6.5.6.3 When generated
14.6.5.6.4 Effect of receipt
14.6.5.7 PMD_RX_TMI.request
14.6.5.7.1 Function
14.6.5.7.2 Semantic of the service primitive
14.6.5.7.3 When generated
14.6.5.7.4 Effect of receipt
14.6.5.8 PMD_RSSI.indication
14.6.5.8.1 Function
1240 14.6.5.8.2 Semantic of the service primitive
14.6.5.8.3 When generated
14.6.5.8.4 Effect of receipt
15 Coexistence
15.1 Introduction
15.2 Overview
1241 15.3 Coexistence signaling
1242 15.4 Coexistence resource allocation
15.5 Start-up and resynchronization procedures
15.6 Coexistence management messages
1243 15.6.2 System-specific massages
15.6.2.1 Network Status Request
15.6.2.1.1 Function
15.6.2.1.2 When generated
1244 15.6.2.1.3 Effect of receipt
15.6.2.2 Change Frequency
15.6.2.2.1 Function
15.6.2.2.2 When generated
15.6.2.2.3 Effect of receipt
16 Inter-system protocol (ISP)
16.1 ISP overview
16.1.1 Coexistence signaling
1245 16.1.2 Network status
16.1.3 Resource allocation
16.1.3.1 Frequency domain multiplexing (FDM)
16.1.3.2 Time domain multiplexing (TDM)
16.1.4 Start-up and resynchronization procedures
16.2 Coexistence signal definition
1246 16.2.1 Signal generation
1248 16.2.2 Phase vectors
1250 16.2.3 Sync point
1251 16.3 Coexistence signaling scheme
16.3.1 The ISP window
1252 16.3.2 ISP fields
1253 16.3.2.1 Access system
16.3.2.2 In-home systems
1254 16.3.2.3 ISP signal placement
16.3.3 Network status
1255 16.4 Coexistence resources
16.4.1 ISP coexistence resources
1256 16.4.1.1 Frequency domain multiplex (FDM)
16.4.1.2 Time domain multiplex (TDM)
1257 16.4.2 Parameters
1258 16.4.3 ISP FDM/TDM modes
16.5 ISP resource allocation
16.5.1 TDM resource allocation for the access systems
1259 16.5.2 TDM general resource allocation
16.6 Start-up and resynchronization procedures
1260 16.6.1 Start-up procedure
16.6.1.1 Start-up procedure for an access system
16.6.1.2 Start-up procedure for an in-home system
1262 16.6.2 ISP Resynchronization procedure
16.6.2.1 Access requests resynchronization
16.6.2.2 In-home detects a resynchronization signal in its window
1263 16.6.2.3 In-home system detects an unsynchronized access system
1264 16.6.2.4 In-home system detects unsynchronized in-home systems
16.7 ISP EMI control procedures
1265 16.8 ISP time slot reuse
16.9 Generic management messages
16.9.1 State indication messages
16.9.1.1 ISP_IndicateState
16.9.1.1.1 Function
1266 16.9.1.1.2 When generated
16.9.1.1.3 Effect of receipt
16.9.1.2 ISP_DetectionReport
16.9.1.2.1 Function
16.9.1.2.2 When generated
16.9.1.2.3 Effect of receipt
1267 16.9.2 Resynchronization messages
16.9.2.1 ISP_StartResync
16.9.2.1.1 Function
16.9.2.1.2 When generated
16.9.2.1.3 Effect of receipt
16.9.2.2 ISP_ResyncFinished
16.9.2.2.1 Function
16.9.2.2.2 When generated
16.9.2.2.3 Effect of receipt
1268 16.9.2.3 ISP_ResyncDetected
16.9.2.3.1 Function
16.9.2.3.2 When generated
16.9.2.3.3 Effect of receipt
16.9.2.4 ISP_DirectResyncTransmission
16.9.2.4.1 Function
16.9.2.4.2 When generated
16.9.2.4.3 Effect of receipt
16.10 Signal transmission and detection
16.10.1 Signal transmission
16.10.1.1 Transmit PSD
1269 16.10.1.2 Clock frequency tolerance
16.10.2 Signal detection
16.11 LRWBS coexistence
1270 16.11.1 Operational overview of operation coexistence with LRWBS policy
16.11.2 Phase Vectors
1271 16.11.3 LRWBS signaling scheme
1272 16.11.4 LRWBS Resource Allocation
1273 16.11.5 LRWBS Transmit PSD
1274 17 Flexible Channel Wavelet physical layer
17.1 Introduction
17.1.1 Characteristics
17.1.2 PHY functions
17.1.2.1 PLCP sublayer
1275 17.1.2.2 PMD sublayer
17.1.2.3 PLME
17.1.3 Service specification method
17.1.4 SCW and FCW MAC parameters
1277 17.2 PLCP sublayer
17.2.1 Introduction
17.2.2 PLCP frame format
1278 17.2.2.1 Overview of the PPDU encoding/decoding process
17.2.2.2 Modulation-dependent parameters
1280 17.3 PHY encoder
17.3.1 RCE frame generation
1281 17.3.2 Scrambler
17.3.3 CRC encoder for FL
17.3.4 Concatenated encoder
17.3.4.1 Reed–Solomon encoder
17.3.4.2 Convolutional encoder/puncturing
17.3.5 Convolutional codes defined by low-density parity-check polynomials (optional)
17.3.6 FEC type field
17.3.7 Interleaver
17.3.7.1 Bit interleaver for one FCW OFDM symbol
1282 17.3.7.2 Bit interleaver for multiple FCW OFDM symbols (optional)
17.3.8 FCW process
17.3.8.1 Mapping
17.3.8.1.1 2PAM, 4PAM, optional 8PAM, optional 16PAM, and optional 32PAM mapping
1283 17.3.8.1.2 Diversity mode
17.3.8.1.2.1 Frame header diversity mode
1284 17.3.8.1.2.2 TMI/FL diversity mode
17.3.8.1.2.3 Frame Body diversity mode
17.3.8.1.2.4 DOF mode
1285 17.3.8.1.2.5 D2PAM mode
17.3.8.2 Baseband symbol generation
17.3.8.2.1 Ramp process
17.3.8.2.2 Short preamble (optional)
17.3.8.2.3 Preamble
17.3.8.2.4 TMI symbol
17.3.8.2.5 Frame control and frame header
17.3.8.2.6 FL symbol
17.3.8.2.7 Frame Body
1286 17.3.8.2.8 Frame Termination
17.3.8.2.9 Postamble (optional)
17.3.8.2.10 Pilot symbol (optional)
17.3.8.3 Bandpass symbol generation
17.3.8.4 IDWT
1287 17.3.8.5 Channel plan
17.3.8.5.1 Resampling example
17.3.8.5.2 Channel plan and Channel ID
1335 17.4 PMD
17.4.1 Block diagram of the FCW transmitter and receiver
1336 17.4.2 Major specifications
1337 17.4.3 Transmission relative power levels (informative)
17.4.4 Transmission spectrum
17.4.5 Notch and power control
1338 17.4.6 STA stand-alone dynamic notching (optional)
17.4.7 System clock frequency tolerance
17.5 PLME
17.5.1 PLME-SAP sublayer management primitives
17.5.2 PHY MIB
17.5.3 TXTIME calculation
17.6 PMD sublayer service
17.6.1 Scope and field of application
1339 17.6.2 Overview of service
17.6.3 Overview of interactions
17.6.4 Basic service and options
17.6.4.1 PMD_SAP peer-to-peer service primitives
17.6.4.2 PMD_SAP sublayer-to-sublayer service primitives
17.6.4.3 PMD_SAP service primitive parameters
1340 17.6.5 PMD_SAP detailed service specification
17.6.5.1 PMD_DATA.request
17.6.5.2 PMD_DATA.indication
17.6.5.3 PMD_TXSTART.request
17.6.5.4 PMD_TXEND.request
17.6.5.5 PMD_TX_TMI_T.request
17.6.5.6 PMD_TX_TMI_R.request
17.6.5.7 PMD_RX_TMI.request
1341 17.6.5.8 PMD_RSSI.indication
17.6.5.9 PMD_TX_FH_FC_SELECT.request
17.6.5.9.1 Function
17.6.5.9.2 Semantic of the service primitive
17.6.5.9.3 When generated
17.6.5.9.4 Effect of receipt
17.6.5.10 PMD_RX_FH_LEN.indication
17.6.5.10.1 Function
17.6.5.10.2 Semantic of the service primitive
17.6.5.10.3 When generated
1342 17.6.5.10.4 Effect of receipt
18 Extended inter-system protocol (E-ISP)
18.1 E-ISP overview
18.1.1 Coexistence signaling
18.1.2 Network status
18.1.3 Resource allocation
18.1.3.1 Frequency domain multiplexing (FDM)
18.1.3.2 Time domain multiplexing (TDM)
18.1.4 Start-up and resynchronization procedures
1343 18.2 Coexistence signal definition
18.2.1 Signal generation
18.2.2 Phase vectors
18.2.3 Sync point
18.3 Coexistence signaling scheme
18.3.1 The E-ISP window
1344 18.3.2 E-ISP fields
1345 18.3.2.1 Access system
18.3.2.2 In-home systems
1346 18.3.2.3 E-ISP signal placement
18.3.3 Network status
1347 18.4 Coexistence resources
18.4.1 E-ISP coexistence resources
18.4.1.1 Frequency domain multiplex (FDM)
18.4.1.2 Time domain multiplex (TDM)
1348 18.4.2 Parameters
18.4.3 E-ISP FDM/TDM modes
18.5 E-ISP resource allocation
18.5.1 TDM resource allocation for the access systems
18.5.2 TDM general resource allocation
1349 18.6 Start-up and resynchronization procedures
18.6.1 Start-up procedure
18.6.1.1 Start-up procedure for an access system
18.6.1.2 Start-up procedure for an in-home system
18.6.2 ISP Resynchronization procedure
18.6.2.1 Access requests resynchronization
1350 18.6.2.2 In-home detects a resynchronization signal in its window
18.6.2.3 In-home system detects an unsynchronized access system
18.6.2.4 In-home system detects unsynchronized in-home systems
18.7 E-ISP EMI control procedures
18.8 E-ISP time slot reuse
18.9 Generic management messages
18.9.1 State indication messages
18.9.1.1 ISP_IndicateState
18.9.1.1.1 Function
18.9.1.1.2 When generated
18.9.1.1.3 Effect of receipt
18.9.1.2 ISP_DetectionReport
18.9.1.2.1 Function
18.9.1.2.2 When generated
18.9.1.2.3 Effect of receipt
1351 18.9.2 Resynchronization messages
18.9.2.1 ISP_StartResync
18.9.2.1.1 Function
18.9.2.1.2 When generated
18.9.2.1.3 Effect of receipt
18.9.2.2 ISP_ResyncFinished
18.9.2.2.1 Function
18.9.2.2.2 When generated
18.9.2.2.3 Effect of receipt
18.9.2.3 ISP_ResyncDetected
18.9.2.3.1 Function
18.9.2.3.2 When generated
18.9.2.3.3 Effect of receipt
18.9.2.4 ISP_DirectResyncTransmission
18.9.2.4.1 Function
18.9.2.4.2 When generated
1352 18.9.2.4.3 Effect of receipt
18.10 Signal transmission and detection
18.10.1 Signal transmission
18.10.1.1 Transmit PSD
18.10.1.2 Clock frequency tolerance
18.10.2 Signal detection
1353 Annex A (normative) List of the IEEE 1901 MAC and PHY management variables
1361 Annex B (normative) Optional filters for the bandpass wavelet OFDM
1400 Annex C (informative) Beacon-triggered TDMA scheduling examples
1406 Annex D (informative) RSNA reference implementations and test vectors
1415 Annex E (informative) Integration function
1417 Annex F (informative) Channel and noise analysis and models for BPL systems
1433 Annex G (informative) Priority mapping
1435 Annex H (informative) DSN in-home security—User experiences (UEs)
1440 Annex I (informative) DSN in-home security—State transition diagrams
1443 Annex J (informative) DSN in-home security—Test vectors
1454 Annex K (informative) Bridging and routing that use 1901 FFT stations as one or more of their portals
1482 Annex L (informative) FFT parameters
1492 Annex M (informative) 1901 FFT and TIA-1113 coexistence
1516 Annex N (informative) Fair share between 1901 access and 1901 in-home using the same PHY
1521 Annex O (informative) 1901 access and 1901 in-home synchronization and interoperability
1526 Annex P (normative) Optional coexistence protocol
1570 Annex Q (informative) Resource request and allocation
1581 Annex R (informative) Resynchronization examples
1590 Annex S (informative) Examples of the coexistence protocol handling hidden node systems
1596 Annex T (informative) Flowcharts of CX Protocol
1611 Annex U (informative) Zero-cross point detection circuit
1613 Annex V (informative) Transmit spectrum mask example
1615 Annex W (informative) CDCF signals
1618 Annex X (informative) Bibliography
1620 Annex Y (informative) Multi-hop communication in 1901 networks
1621 Annex Z (informative) Technical corrections, clarifications and enhancements
1622 Back cover
IEEE 1901-2020
$373.75