IEEE 1904.1-2013

$194.58

IEEE Standard for Service Interoperability in Ethernet Passive Optical Networks (SIEPON)

Published By	Publication Date	Number of Pages
IEEE	2013	834

Guaranteed Safe Checkout

Category: IEEE

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

New IEEE Standard – Superseded. This standard describes the system-level requirements needed to ensure service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment. The specifications complement the existing IEEE 802.3 and IEEE 802.1 standards, which ensure the interoperability at the Physical Layer (PHY) and Data Link Layer. Specifically included in this specification are – EPON system-level interoperability specifications covering equipment functionality, traffic engineering, and service-level quality of service/class of service (QoS/CoS) mechanisms; – Management specifications covering equipment management, service management, and EPON power‐saving mechanism.

PDF Catalog

PDF Pages	PDF Title
1	IEEE Std 1904.1-2013 Front Cover
3	Title page
6	Notice to users Laws and regulations Copyrights Updating of IEEE documents Errata Patents
7	Participants
9	Introduction
10	Contents
33	Important notice 1 Overview 1.1 Scope 1.2 Purpose
34	1.3 Coverage 1.4 Overview of clauses
36	2 Normative references
39	3 Definitions, acronyms, and abbreviations 3.1 Definitions
42	3.2 0BAcronyms and abbreviations
47	3.3 Special terms
48	3.4 Primitives in SIEPON 3.5 Notation for state diagrams 3.5.1 General conventions
49	3.5.1.1 Representation of states 3.5.1.2 Transitions
50	3.5.2 State diagrams and accompanying text 3.5.3 Actions inside state blocks 3.5.4 State diagram variables 3.5.5 Operators
51	3.5.6 Timers 3.5.7 Hexadecimal notation 3.5.8 Binary notation 3.6 Notation for PICS
52	3.6.1 Abbreviations and special symbols 3.6.2 Instructions for completing the PICS proforma
53	3.6.3 Additional information 3.6.4 Exception information 3.6.5 Conditional items
54	4 Specification packages 4.1 Introduction 4.2 SIEPON packages
57	4.3 Compliance with IEEE Std 802.3 4.4 Extended OAM
58	5 Scope and architecture 5.1 Introduction 5.2 Coverage 5.3 EPON system architecture 5.3.1 Introduction
59	5.3.2 ODN
60	5.3.3 ONU architecture 5.3.3.1 L-ONU
62	5.3.3.2 C-ONU 5.3.3.3 S-ONU 5.3.4 OLT architecture
63	5.3.4.1 L-OLT
65	5.3.4.2 C-OLT 5.3.4.3 S-OLT 5.3.5 Interfaces 5.3.5.1 ONU_MDI
66	5.3.5.2 OLT_MDI 5.3.5.3 ONU_LI 5.3.5.4 OLT_LI 5.3.5.5 ONU_CI 5.3.5.6 OLT_CI
67	5.3.5.7 Internal Interfaces
68	6 MAC Client reference model 6.1 Introduction 6.2 MAC Client reference model definition
70	6.2.1 Reference model naming nomenclature 6.2.1.1 Functional blocks 6.2.1.2 Actionable entries
71	6.2.1.3 Functional elements
72	6.3 EPON Service Path definition 6.3.1 ESP examples
74	6.3.2 ESP_CTRL definition 6.3.2.1 ESP_VECTOR signal
75	6.3.2.2 ESP_COLOR signal 6.4 Frame flow through reference model
76	6.4.1 Frame flow through EPON OLT 6.4.1.1 Downstream frames through OLT
77	6.4.1.2 Upstream frames through OLT
78	6.4.2 Frame flow through EPON ONU 6.4.2.1 Downstream frames through ONU 6.4.2.2 Upstream frames through ONU
79	6.5 Blocks in the reference model 6.5.1 Input 6.5.2 Classifier
80	6.5.2.1 Classification element (rule) structure
81	6.5.2.1.1 Classification fields
84	6.5.2.1.1.1 Flexible access mechanism 6.5.2.1.2 Comparison operators
85	6.5.2.2 Classifier provisioning model and parameters 6.5.2.2.1 Default configuration 6.5.2.2.2 Adding one or more rules
86	6.5.2.2.3 Deleting one or more rules 6.5.2.2.4 Querying one or more rules 6.5.2.2.5 Clearing all rules
87	6.5.2.2.6 Learning function for the Classifier 6.5.2.2.7 Multicast forwarding table at the Classifier 6.5.3 Modifier
89	6.5.3.1 Modifier provisioning model and parameters
90	6.5.3.1.1 Default configuration 6.5.4 Policer/Shaper
91	6.5.4.1 Policer/Shaper actionable entry 6.5.4.2 Policer/Shaper functional elements 6.5.4.3 Policer/Shaper provisioning model and parameters
92	6.5.4.3.1 Default configuration 6.5.5 CrossConnect
93	6.5.6 Queues 6.5.6.1 Default configuration
94	6.5.7 Scheduler 6.5.8 Output
96	7 Connectivity configurations 7.1 Introduction 7.2 VLAN configurations 7.2.1 VLAN operations
97	7.2.1.1 Add Tag operation 7.2.1.1.1 Add C-Tag operation
98	7.2.1.1.2 Add S-Tag operation 7.2.1.1.3 Add VLAN0 operation
99	7.2.1.1.4 Add VLAN1 operation
100	7.2.1.2 Remove Tag operation 7.2.1.2.1 Remove C-Tag operation 7.2.1.2.2 Remove S-Tag operation
101	7.2.1.2.3 Remove VLAN0 operation
102	7.2.1.2.4 Remove VLAN1 operation
103	7.2.1.3 Replace Tag Field operation 7.2.1.3.1 Replace C-Tag operation
104	7.2.1.3.2 Replace S-Tag operation
105	7.2.1.3.3 Replace VLAN0 operation 7.2.1.3.4 Replace VLAN1 operation
106	7.2.1.4 Double-tagging operations 7.2.2 VLAN modes
107	7.2.2.1 Device-based VLAN modes 7.2.2.1.1 OLT Transparent VLAN mode
108	7.2.2.1.2 ONU Transparent VLAN mode
110	7.2.2.1.3 OLT Tagging VLAN mode
112	7.2.2.1.4 ONU Tagging VLAN mode
114	7.2.2.1.5 OLT Translation VLAN mode
116	7.2.2.1.6 ONU ToS/CoS Conversion VLAN mode
118	7.2.2.1.7 Default configuration 7.2.2.1.8 Device-based VLAN management 7.2.2.2 Port-based VLAN modes
119	7.2.2.2.1 Transparent VLAN mode
120	7.2.2.2.2 Tagging VLAN mode
122	7.2.2.2.3 Translation VLAN mode
124	7.2.2.2.4 Filtering VLAN mode
126	7.2.2.2.5 N:1 Aggregation VLAN mode
128	7.2.2.2.6 Default configuration
129	7.2.2.2.7 Port-based VLAN management 7.2.2.2.8 MAC aging function
130	7.2.2.3 Provider Bridging (PB) VLAN modes 7.2.2.3.1 Transport PB VLAN mode
132	7.2.2.3.2 Encapsulation PB VLAN mode
133	7.2.2.3.3 MAC-Source-Address‐based admission control function 7.3 Tunneling configurations
134	7.3.1 Tunneling operations 7.3.1.1 Add Tag operation 7.3.1.1.1 Add I-Header operation
135	7.3.1.1.2 Add B-Tag operation 7.3.1.2 Remove Tag operation 7.3.1.2.1 Remove I-Header operation
136	7.3.1.2.2 Remove B-Tag operation 7.3.1.3 Replace Tag operation
137	7.3.1.3.1 Replace I-Header operation 7.3.1.3.2 Replace I-Tag operation
138	7.3.1.3.3 Replace B-Tag operation 7.3.1.4 Double-tagging operations
139	7.3.2 Tunneling modes 7.3.2.1 Transport mode
142	7.3.2.2 Encapsulation mode
144	7.4 Multicast configurations 7.4.1 Introduction
146	7.4.1.1 Multicast transport 7.4.1.1.1 Multicast ESP
149	7.4.1.1.2 1G-EPON/10G-EPON coexistence requirements
150	7.4.1.1.3 ONU-sourced multicast transport 7.4.2 Multicast based on VLAN and/or MAC group address 7.4.2.1 Operation outline
151	7.4.2.1.1 OLT-based multicast management 7.4.2.2 MLD-based multicast control 7.4.2.2.1 ONU requirements 7.4.2.2.2 OLT requirements
152	7.4.2.3 Multicast transport based on VLAN 7.4.2.3.1 OLT forwarding behavior
154	7.4.2.3.2 ONU forwarding behavior 7.4.2.4 Multicast transport based on MAC group address 7.4.2.4.1 Static MAC address registration
155	7.4.2.4.2 Dynamic MAC address registration
156	7.4.3 Multicast based on combined VLAN and group address with no authorization control 7.4.3.1 Operation outline 7.4.3.1.1 OLT operation 7.4.3.1.2 ONU operation
157	7.4.3.2 Multicast management and control 7.4.3.2.1 ONU requirements 7.4.3.2.2 OLT requirements 7.4.3.3 Multicast transport based on VLAN and MAC group address
158	7.4.3.3.1 OLT forwarding behavior 7.4.3.3.2 ONU forwarding behavior
159	7.4.3.4 Multicast transport based on VLAN and IP multicast address
160	7.4.3.4.1 OLT forwarding behavior
161	7.4.3.4.2 ONU forwarding behavior
163	7.4.4 Multicast based on combined VLAN and group address with authorization control 7.4.4.1 Operation outline 7.4.4.1.1 OLT operation 7.4.4.1.2 ONU operation
164	7.4.4.2 Multicast management and control 7.4.4.2.1 ONU requirements 7.4.4.2.2 OLT requirements
165	7.4.4.3 Multicast transport based on VLAN and MAC group address 7.4.4.3.1 OLT forwarding behavior 7.4.4.3.2 ONU forwarding behavior 7.4.4.4 Multicast transport based on VLAN and IP multicast address 7.4.4.4.1 OLT forwarding behavior
166	7.4.4.4.2 ONU forwarding behavior 7.4.4.5 Examples of multicast with authorization control 7.4.4.5.1 Multicast client prohibited from accessing multicast content 7.4.4.5.2 Multicast client permitted to access multicast content
168	7.4.4.5.3 Multicast client permitted to temporarily access multicast content
170	7.4.5 Multicast based on combined LLID and IP group addresses 7.4.5.1 Operation outline 7.4.5.2 IGMP-based and MLD-based multicast control 7.4.5.2.1 ONU requirements 7.4.5.2.2 OLT requirements
171	7.4.5.3 Multicast forwarding based on LLID and IP address 7.4.5.3.1 OLT forwarding behavior
173	7.4.5.3.2 ONU forwarding behavior
174	8 Service performance and QoS guarantees 8.1 Introduction 8.2 Traffic types and services 8.2.1 Real-time flows with periodic fixed-size data frames 8.2.1.1 Circuit emulation service 8.2.1.2 Mobile backhaul service 8.2.2 Real-time flows with variable-size data frames or with periodic inactivity
175	8.2.2.1 VoIP service 8.2.2.2 IPTV service 8.2.3 Non-real-time flows that require throughput/frame loss guarantees 8.2.3.1 Guaranteed data service 8.2.4 Non-real-time, non-guaranteed flows 8.2.4.1 Best effort service 8.3 QoS parameters and metrics
176	8.3.1 Committed Information Rate and Committed Burst Size parameters 8.3.2 Excess Information Rate and Excess Burst Size parameters 8.3.2.1 Excess Information Rate Weight parameter
177	8.3.3 Peak Information Rate and Peak Burst Size parameters 8.3.4 Bandwidth assignment methodologies
178	8.3.5 Frame delay
179	8.3.6 Frame Delay Variation (FDV) 8.3.7 Frame Loss Ratio (FLR)
180	8.4 QoS mechanisms and configurations 8.4.1 Configuration supporting DPoE QoS model 8.4.1.1 Queue service discipline 8.4.1.2 Report queue length calculation
184	8.4.1.3 REPORT MPCPDU format 8.4.1.3.1 Number of Queue Sets 8.4.1.3.2 Number of queues per Queue Set
185	8.4.1.3.3 Queue #n Report 8.4.1.3.4 Ordering of Queue #n Reports across multiple Queue Sets 8.4.2 Configuration supporting dedicated thresholds 8.4.2.1 Queue service discipline
186	8.4.2.2 Report queue length calculation
188	8.4.2.3 REPORT MPCPDU format with dedicated thresholds
189	8.4.2.3.1 Queue #n Report
190	8.4.2.3.2 Maximum value of the Queue #n Report 8.4.2.3.3 Ordering of Queue #n Report across multiple Queue Sets 8.4.2.3.4 Interpretation of the last Queue Set 8.4.2.3.5 Number of queues per Queue Set 8.4.2.3.6 Number of Queue Sets
191	8.4.2.4 Queue management 8.4.3 Configuration supporting aggregated thresholds 8.4.3.1 Queue service discipline
192	8.4.3.2 Report queue length calculation
194	8.4.3.3 REPORT MPCPDU format with cumulative thresholds
195	8.4.3.3.1 Queue #n Report
196	8.4.3.3.2 Maximum value of the Queue #n Report 8.4.3.3.3 Ordering of Queue #n Report across multiple Queue Sets 8.4.3.3.4 Interpretation of the first or last Queue Set 8.4.3.3.5 Number of queues per Queue Set
197	8.4.3.3.6 Number of Queue Sets 8.4.3.4 Discovery and configuration of queue parameters
198	8.5 Performance monitoring and verification 8.5.1 General requirements 8.5.2 Management monitoring requirements
199	8.5.3 Performance monitoring parameters
203	9 Service availability 9.1 Device and transceiver status monitoring and diagnostic functions 9.1.1 Introduction 9.1.2 IEEE Std 802.3-defined monitoring parameters 9.1.2.1 Errored symbol period 9.1.2.2 Errored frames 9.1.2.3 Errored frame period
204	9.1.2.4 Errored frame seconds 9.1.2.5 1G-EPON corrected FEC block counter 9.1.2.6 1G-EPON uncorrected FEC block counter 9.1.2.7 10/1GBASE-PRX and 10GBASE-PR corrected FEC codewords counter 9.1.2.8 10/1GBASE-PRX and 10GBASE-PR uncorrected FEC codewords counter
205	9.1.3 Transceiver status monitoring for SFF-8472– and SFF-8077i–compliant DPoE devices 9.1.3.1 Optical transceiver temperature 9.1.3.2 Optical transceiver supply voltage 9.1.3.3 Optical transmitter bias current 9.1.3.4 Optical transmitter output power 9.1.3.5 Optical receiver input power 9.1.4 Transceiver status monitoring, with sampling time requirements 9.1.4.1 Management requirements for ONUs
206	9.1.4.2 Management requirements for OLTs 9.1.4.3 Measurement and monitoring requirements 9.1.4.4 Optical transceiver temperature 9.1.4.5 Optical transceiver supply voltage 9.1.4.6 Optical transmitter bias current 9.1.4.7 Optical transmitter output power
207	9.1.4.8 Optical receiver input power for ONUs 9.1.4.9 Optical receiver input power for OLTs 9.1.4.10 Minimum sampling time for OLTs 9.1.5 Transceiver status monitoring requirements 9.1.5.1 Management requirements
208	9.1.5.2 Measurement and monitoring requirements 9.1.5.3 Optical transceiver temperature 9.1.5.4 Optical transceiver supply voltage 9.1.5.5 Optical transmitter unit bias current 9.1.5.6 Optical transmitter output power 9.1.5.7 Optical receiver input power
209	9.1.6 Alarms and warnings associated with ONU transmitter status monitoring 9.1.7 Management for ONU alarms, warnings, and transceiver status 9.1.8 UNI port loop detection 9.1.8.1 Introduction
210	9.1.8.2 Functional requirements 9.1.8.3 Management and operational requirements
211	9.1.8.4 UNI-UNI loop conditions 9.1.9 Loopback function
212	9.2 Definitions of events 9.2.1 Introduction 9.2.2 Event-related management operations 9.2.2.1 Event set/clear
213	9.2.3 Events associated with the PON Port object
214	9.2.3.1 RXPowerAlarmH 9.2.3.2 RXPowerAlarmL 9.2.3.3 TXPowerAlarmH
215	9.2.3.4 TXPowerAlarmL 9.2.3.5 TXBiasAlarmH 9.2.3.6 TXBiasAlarmL 9.2.3.7 VccAlarmH 9.2.3.8 VccAlarmL 9.2.3.9 TempAlarmH 9.2.3.10 TempAlarmL 9.2.3.11 RXPowerWarningH 9.2.3.12 RXPowerWarningL
216	9.2.3.13 TXPowerWarningH 9.2.3.14 TXPowerWarningL 9.2.3.15 TXBiasWarningH 9.2.3.16 TXBiasWarningL 9.2.3.17 VccWarningH 9.2.3.18 VccWarningL 9.2.3.19 TempWarningH 9.2.3.20 TempWarningL 9.2.3.21 DownstreamDropEventsAlarm
217	9.2.3.22 UpstreamDropEventsAlarm 9.2.3.23 DownstreamCRCErrorFramesAlarm 9.2.3.24 UpstreamCRCErrorFramesAlarm 9.2.3.25 DownstreamOversizeFrameAlarm 9.2.3.26 UpstreamOversizeFrameAlarm 9.2.3.27 DownstreamDiscardsAlarm 9.2.3.28 UpstreamDiscardsAlarm 9.2.3.29 DownstreamErrorsAlarm 9.2.3.30 UpstreamErrorsAlarm
218	9.2.3.31 DownstreamDropEventsWarning 9.2.3.32 UpstreamDropEventsWarning 9.2.3.33 DownstreamCRCErrorFramesWarning 9.2.3.34 UpstreamCRCErrorFramesWarning 9.2.3.35 DownstreamOversizeFramesWarning 9.2.3.36 UpstreamOversizeFramesWarning 9.2.3.37 DownstreamDiscardsWarning 9.2.3.38 UpstreamDiscardsWarning 9.2.3.39 DownstreamErrorsWarning
219	9.2.3.40 UpstreamErrorsWarning 9.2.4 Events associated with the ONU object 9.2.4.1 EquipmentAlarm 9.2.4.2 PowerAlarm
220	9.2.4.3 BatteryMissing 9.2.4.4 BatteryFailure 9.2.4.5 BatteryVoltLow 9.2.4.6 IntrusionAlarm 9.2.4.7 SelfTestFailure 9.2.4.8 ONUTempHighAlarm and ONUTempLowAlarm
221	9.2.4.9 PON_IF_Switch 9.2.4.10 SleepStatusUpdate 9.2.4.11 ActivationSuccessEvent 9.2.4.12 ActivationFailureEvent 9.2.5 Events associated with the UNI Port object
222	9.2.5.1 EthPortAutoNegFailure 9.2.5.2 EthPortLOS
223	9.2.5.3 EthPortConnectionFailure 9.2.5.4 EthPortLoopback 9.2.5.5 EthPortCongestion 9.2.5.6 DownstreamDropEventsAlarm 9.2.5.7 UpstreamDropEventsAlarm 9.2.5.8 DownstreamCRCErrorFramesAlarm 9.2.5.9 UpstreamCRCErrorFramesAlarm 9.2.5.10 DownstreamUndersizeFramesAlarm 9.2.5.11 UpstreamUndersizeFramesAlarm 9.2.5.12 DownstreamOversizeFrameAlarm
224	9.2.5.13 UpstreamOversizeFrameAlarm 9.2.5.14 DownstreamFragmentsAlarm 9.2.5.15 UpstreamFragmentsAlarm 9.2.5.16 DownstreamJabbersAlarm 9.2.5.17 UpstreamJabbersAlarm 9.2.5.18 DownstreamDiscardsAlarm 9.2.5.19 UpstreamDiscardsAlarm 9.2.5.20 DownstreamErrorsAlarm 9.2.5.21 UpstreamErrorsAlarm
225	9.2.5.22 StatusChangeTimesAlarm 9.2.5.23 DownstreamDropEventsWarning 9.2.5.24 UpstreamDropEventsWarning 9.2.5.25 DownstreamCRCErrorFramesWarning 9.2.5.26 UpstreamCRCErrorFramesWarning 9.2.5.27 DownstreamUndersizeFramesWarning 9.2.5.28 UpstreamUndersizeFramesWarning 9.2.5.29 DownstreamOversizeFramesWarning 9.2.5.30 UpstreamOversizeFramesWarning
226	9.2.5.31 DownstreamFragmentsWarning 9.2.5.32 UpstreamFragmentsWarning 9.2.5.33 DownstreamJabbersWarning 9.2.5.34 UpstreamJabbersWarning 9.2.5.35 DownstreamDiscardsWarning 9.2.5.36 UpstreamDiscardsWarning 9.2.5.37 DownstreamErrorsWarning 9.2.5.38 UpstreamErrorsWarning 9.2.5.39 StatusChangeTimesWarning
227	9.2.6 Events defined in IEEE Std 802.3, Clause 57 9.2.6.1 Downstream link fault 9.2.6.2 Upstream link fault 9.2.6.3 Dying Gasp 9.2.6.4 ONU critical event
228	9.2.6.5 OLT critical event 9.2.7 Event definitions derived from ITU-T G.984.3 9.2.7.1 Downstream Signal Failure (SF-D) alarm 9.2.7.2 Upstream Signal Failure (SF-U) alarm 9.2.7.3 Downstream Signal Degradation (SD-D) alarm
229	9.2.7.4 Upstream Signal Degradation (SD-U) alarm 9.2.7.5 Configuring errored frame event parameters 9.2.7.6 Alarm setting and clearing process 9.2.7.6.1 Variables
230	9.2.7.6.2 Timers 9.2.7.6.3 Primitives
231	9.2.7.6.4 State diagrams
232	9.2.8 Loss of service 9.3 Optical link protection 9.3.1 Introduction 9.3.1.1 Terminology
233	9.3.2 Device architecture and requirements 9.3.2.1 Line and Client protection
234	9.3.2.1.1 Line device protection 9.3.2.1.2 Client device protection
235	9.3.2.2 Line fault detection 9.3.2.2.1 OLT detection conditions 9.3.2.2.2 ONU detection conditions
236	9.3.3 Trunk protection scheme
237	9.3.3.1 Functional requirements
238	9.3.3.2 C-OLT requirements
239	9.3.3.3 C-ONU requirements 9.3.3.4 Configuration messages 9.3.3.5 Trunk switching process 9.3.3.5.1 Variables
240	9.3.3.5.2 Timers 9.3.3.5.3 Functions
241	9.3.3.5.4 Primitives 9.3.3.5.5 State diagrams
243	9.3.4 Tree protection scheme
244	9.3.4.1 Functional requirements
245	9.3.4.2 C-OLT requirements
246	9.3.4.3 C-ONU requirements
247	9.3.4.4 Examples of tree protection switching 9.3.4.4.1 NMS-driven tree line switchover event
248	9.3.4.4.2 Automated tree line switching with line failure detection
249	9.3.4.4.3 Automated tree line switching with upstream line failure detection 9.3.4.4.4 Automated tree line switching with downstream line failure detection
250	9.3.4.5 Configuration messages
251	9.3.4.6 Tree protection process 9.3.4.6.1 Constants 9.3.4.6.2 Variables
252	9.3.4.6.3 Functions
253	9.3.4.6.4 Primitives
255	9.3.4.6.5 State diagrams
257	9.3.5 Trunk protection scheme with explicit messaging 9.3.5.1 Functional requirements 9.3.5.2 HOLDOVER message for trunk protection scheme
258	9.3.5.3 Examples of trunk protection switching 9.3.5.3.1 Automated trunk protection switching 9.3.5.3.2 NMS-driven trunk protection switching
260	9.3.5.4 C-OLT requirements 9.3.5.5 C-ONU requirements
261	9.3.5.6 Configuration messages 9.3.5.7 Trunk switching process 9.3.5.7.1 Primitives 9.3.5.7.2 State diagrams
263	9.4 Remote ONU transmitter power supply control function 9.4.1 Introduction 9.4.2 Remote ONU transmitter power supply control function 9.4.2.1 OLT requirements
264	9.4.2.2 ONU requirements 9.4.2.3 Coexistence requirements
265	10 Power saving 10.1 Introduction 10.1.1 Terminology
266	10.2 Objectives of power saving in EPON 10.3 Scope of power-saving specifications for EPON
267	10.4 EPON service and power-saving management requirements 10.4.1 EPON compliance requirements 10.4.2 EPON service requirements 10.4.3 Timing requirements
268	10.4.4 EPON power-saving management requirements 10.5 Active mechanisms of power saving for EPON 10.5.1 Introduction 10.5.2 OLT-driven power-saving mechanism 10.5.2.1 Introduction 10.5.2.2 EPON system-level requirements
269	10.5.2.3 ONU requirements 10.5.2.4 OLT requirements
270	10.5.2.5 Power-saving mechanism 10.5.2.5.1 Signaling protocol 10.5.2.5.2 Initiation stage
271	10.5.2.5.3 Early wake-up
272	10.5.2.5.4 Synchronized wake-up
273	10.5.2.5.5 State diagrams and variable definitions 10.5.2.5.5.1 Variables
275	10.5.2.5.5.2 Timers 10.5.2.5.5.3 Functions 10.5.2.5.5.4 Primitives
277	10.5.2.5.5.5 State diagrams
278	10.5.3 Power-saving mechanism with support for ONU initiation/response 10.5.3.1 Introduction 10.5.3.2 EPON system-level requirements 10.5.3.2.1 Sleep modes
279	10.5.3.3 Power-saving mechanism 10.5.3.3.1 Signaling protocol 10.5.3.3.2 Initiation stage
280	10.5.3.3.2.1 OLT-initiated power-saving mode 10.5.3.3.2.2 ONU-initiated power-saving mode 10.5.3.3.3 Termination stage
282	10.5.3.3.4 Early wake-up 10.5.3.3.5 Active mode resync wake-up mechanism
283	10.5.3.3.6 State diagrams and variables definitions 10.5.3.3.6.1 Variables
287	10.5.3.3.6.2 Timers
288	10.5.3.3.6.3 Functions 10.5.3.3.6.4 State diagrams
291	10.5.3.4 Management based on Extension MAC Control frames 10.5.3.4.1 Extension MAC Control frame structure for power saving 10.5.3.4.2 Extension MAC Control frame types for power saving 10.5.3.4.2.1 Extension MAC Control frame type codes for power saving 10.5.3.4.2.2 SLEEP_ALLOW message
292	10.5.3.4.2.3 SLEEP_ACK message 10.5.3.4.2.4 SLEEP_INDICATION message
293	10.5.4 OLT-driven power-saving mechanism with multiple sleep periods 10.5.4.1 Functional requirements 10.5.4.2 EPON compliance requirements 10.5.4.3 EPON system-level requirements
294	10.5.4.4 ONU requirements
295	10.5.4.5 OLT requirements 10.5.4.6 Power-saving mechanism 10.5.4.6.1 Signaling protocol 10.5.4.6.2 Initiation stage
296	10.5.4.6.3 Early wake-up 10.5.4.6.4 Synchronized wake-up
297	10.5.4.6.5 Refresh mechanism 10.5.4.6.6 State diagrams and variable definitions 10.5.4.6.6.1 Variables
299	10.5.4.6.6.2 Timers 10.5.4.6.6.3 Functions 10.5.4.6.6.4 Primitives
301	10.5.4.6.6.5 State diagrams
304	11 Security-oriented mechanisms 11.1 Introduction 11.2 Data encryption and integrity protection 11.2.1 Introduction 11.2.2 Data encryption in DPoE 11.2.3 IEEE 802.1AE data encryption 11.2.3.1 Ciphersuite 11.3 ONU authentication and secure provisioning 11.3.1 Introduction 11.3.2 MAC-address-based, Logical-ID-based, and hybrid authentication 11.3.2.1 Introduction
305	11.3.2.2 Scope 11.3.2.3 Threat model 11.3.2.4 Authentication mechanisms 11.3.2.4.1 Requirements
306	11.3.2.4.2 Operation of the OLT authentication function 11.3.2.4.3 MAC-address-based authentication
308	11.3.2.4.4 Logical-ID-based authentication
310	11.3.2.4.5 Hybrid authentication 11.3.2.4.6 Registration deference mechanism
311	11.3.2.4.7 Authentication state diagrams 11.3.2.4.7.1 Constants 11.3.2.4.7.2 Variables
312	11.3.2.4.7.3 Timers 11.3.2.4.7.4 Functions
313	11.3.2.4.7.5 Primitives
316	11.3.2.4.7.6 State diagrams
320	11.3.3 ONU authentication in DPoE 11.3.4 IEEE 802.1X ONU authentication 11.3.4.1 IEEE 802.1X authentication in EPON
321	11.3.4.1.1 Control frame flow to/from the Authentication agent 11.3.4.1.2 Control of user traffic according to authentication state
322	11.3.4.2 Authentication mechanisms 11.3.4.2.1 IEEE Std 802.1X-2004 and EAP-MD5
323	11.3.4.2.1.1 EAP framing and method 11.3.4.2.1.2 Authentication sequence 11.3.4.2.2 IEEE Std 802.1X-2010 and EAP-GPSK
324	11.3.4.2.2.1 EAP framing and method 11.3.4.2.2.2 Use of EAP-GPSK
325	12 Discovery and maintenance 12.1 Introduction 12.2 Device discovery and capability discovery 12.2.1 Non-SNMP-optimized eOAM management 12.2.1.1 MPCP/OAM discovery process 12.2.1.2 eOAM discovery process
326	12.2.1.2.1 Ordering of Organization Specific Information TLVs 12.2.1.2.1.1 Source OAM Client requirements 12.2.1.2.1.2 Destination OAM Client requirements 12.2.1.2.2 Message flow during eOAM discovery process
327	12.2.1.2.2.1 Constants
328	12.2.1.2.2.2 Variables
329	12.2.1.2.2.3 Timers 12.2.1.2.2.4 Functions 12.2.1.2.2.5 Primitives
332	12.2.1.2.2.6 State diagrams
333	12.2.1.3 OAM and eOAM keep-alive process 12.2.1.4 Client ONUs with multiple Line ONUs 12.2.1.4.1 Introduction
334	12.2.1.4.2 OLT-initiated mL-ONU discovery and registration
335	12.2.1.4.3 Initialization and mode-negotiation: detailed requirements
337	12.2.2 SNMP-optimized eOAM management 12.2.2.1 MPCP/OAM discovery process
338	12.2.2.2 eOAM discovery process 12.2.3 DPoE eOAM management 12.2.3.1 MPCP/OAM discovery process
339	12.2.3.2 eOAM discovery process 12.2.3.2.1 Requirements
340	12.2.3.2.2 Ordering of Organization Specific Information TLVs 12.2.3.2.2.1 Source OAM Client requirements 12.2.3.2.2.2 Destination OAM Client requirements 12.2.3.2.3 Message flow during eOAM discovery process 12.2.3.3 OAM and eOAM keep-alive process
341	12.3 Software updates 12.3.1 Software upgrade using non-SNMP-optimized eOAM mechanism
342	12.3.1.1 Software upgrade process 12.3.1.2 Software download process 12.3.1.2.1 Software image transfer modes 12.3.1.2.2 Software image download process
343	12.3.1.2.2.1 Software image download initiation
344	12.3.1.2.2.2 Software image download 12.3.1.2.2.3 Software image verification
345	12.3.1.3 Software image activation process 12.3.1.4 Software image committing process
346	12.3.1.5 Boot Loader process
347	12.3.1.6 State diagrams 12.3.1.6.1 Constants
348	12.3.1.6.2 Variables
350	12.3.1.6.3 Timers
351	12.3.1.6.4 Functions
354	12.3.1.6.5 Primitives
362	12.3.1.6.6 State diagrams
368	12.3.2 Software upgrade using SNMP-optimized eOAM management 12.3.2.1 Software upgrade types 12.3.2.2 Software upgrade procedure 12.3.2.2.1 Push-type upgrade
370	12.3.2.2.2 Pull-type upgrade
372	12.3.3 Software upgrade using DPoE eOAM management 12.3.3.1 Software image download process
374	12.3.3.1.1 Download initiation step 12.3.3.1.2 Download step
375	12.3.3.1.3 Verification step 12.3.3.1.4 Committing step
376	12.3.3.2 State diagrams 12.3.3.2.1 Constants
377	12.3.3.2.2 Variables
379	12.3.3.2.3 Timers 12.3.3.2.4 Functions
380	12.3.3.2.5 Primitives
383	12.3.3.2.6 State diagrams
386	13 Extended OAM for EPON 13.1 Profile-independent eOAM management 13.1.1 Requirements 13.1.1.1 Functional requirements 13.1.1.2 Frame size requirements 13.1.1.3 Frame rate requirements 13.1.1.4 eOAMPDU structure 13.2 Non-SNMP-optimized eOAM management 13.2.1 Timing requirements
387	13.2.2 eOAMPDU structure 13.2.2.1 eOAMPDU frame format
388	13.2.2.2 TLV-oriented structure 13.2.2.2.1 Variable Descriptor TLV
389	13.2.2.2.2 Variable Container TLV
390	13.2.2.3 TLVs for 802.3 OAMPDUs 13.2.2.3.1 Extended Information TLV
391	13.2.2.3.2 Event Notification TLV
394	13.2.3 eOAMPDU 13.2.3.1 eOAMPDU codes 13.2.3.2 eOAM_Get_Request eOAMPDU
395	13.2.3.3 eOAM_Get_Response eOAMPDU
396	13.2.3.4 eOAM_Set_Request eOAMPDU
397	13.2.3.5 eOAM_Set_Response eOAMPDU 13.2.3.6 eOAM_Authentication eOAMPDU
398	13.2.3.6.1 eOAM_Authentication_Request eOAMPDU
399	13.2.3.6.2 eOAM_Authentication_Response eOAMPDU 13.2.3.6.3 eOAM_Authentication_Success eOAMPDU
400	13.2.3.6.4 eOAM_Authentication_Failure eOAMPDU 13.2.3.7 eOAM_Software eOAMPDU
401	13.2.3.7.1 eOAM_Software_FileWriteRequest eOAMPDU
402	13.2.3.7.2 eOAM_Software_FileTransferData eOAMPDU
403	13.2.3.7.3 eOAM_Software_FileTransferACK eOAMPDU
404	13.2.3.7.4 eOAM_Software_FileTransferError eOAMPDU 13.2.3.7.5 eOAM_Software_EndDownloadRequest eOAMPDU
405	13.2.3.7.6 eOAM_Software_EndDownloadResponse eOAMPDU
406	13.2.3.7.7 eOAM_Software_ActivateImageRequest eOAMPDU
407	13.2.3.7.8 eOAM_Software_ActivateImageResponse eOAMPDU 13.2.3.7.9 eOAM_Software_CommitImageRequest eOAMPDU
408	13.2.3.7.10 eOAM_Software_CommitImageResponse eOAMPDU
409	13.2.3.8 eOAM_QueueConfig eOAMPDU
410	13.2.3.8.1 eOAM_QueueThreshold_Get eOAMPDU 13.2.3.8.2 eOAM_QueueThreshold_Info eOAMPDU
411	13.2.3.8.3 eOAM_QueueThreshold_Set eOAMPDU
413	13.2.3.8.4 eOAM_QueueThreshold_ACK eOAMPDU
414	13.2.3.9 eOAM_Event eOAMPDU
415	13.2.3.9.1 eOAM_EventStatus_Request eOAMPDU
416	13.2.3.9.2 eOAM_EventStatus_Set eOAMPDU
417	13.2.3.9.3 eOAM_EventStatus_Response eOAMPDU
418	13.2.3.9.4 eOAM_EventThreshold_Request eOAMPDU 13.2.3.9.5 eOAM_EventThreshold_Set eOAMPDU
419	13.2.3.9.6 eOAM_EventThreshold_Response eOAMPDU
420	13.2.4 eOAMPDU return codes
422	13.3 SNMP-optimized eOAM management 13.3.1 eOAMPDU structure 13.3.1.1 eOAMPDU frame format
423	13.3.1.2 PDU type 13.3.1.3 RequestId
424	13.3.1.4 ErrorStatus 13.3.1.5 TLV-oriented structure 13.3.1.5.1 Variable Descriptor TLV
425	13.3.1.5.2 Variable Container TLV
426	13.3.2 eOAM sequences
427	13.3.3 eOAMPDU 13.3.3.1 GetRequest eOAMPDU
428	13.3.3.2 GetResponse eOAMPDU
429	13.3.3.3 SetRequest eOAMPDU
430	13.3.3.4 SetResponse eOAMPDU
431	13.3.3.5 UserDatagram eOAMPDU 13.3.3.5.1 TFTP packet format
432	13.3.3.6 QueueConfig eOAMPDU 13.3.3.6.1 ReportParameter_Get eOAMPDU
433	13.3.3.6.2 ReportParameter_Info eOAMPDU
435	13.3.3.6.3 ReportParameter_Set eOAMPDU
437	13.3.3.6.4 ReportParameter_ACK eOAMPDU
438	13.3.3.6.5 QueueThreshold_Get eOAMPDU 13.3.3.6.6 QueueThreshold_Info eOAMPDU
441	13.3.3.6.7 QueueThreshold_Set eOAMPDU
443	13.3.3.6.8 QueueThreshold_ACK eOAMPDU
445	13.3.3.7 OnuMIB eOAMPDU
446	13.3.3.8 DefaultFilter eOAMPDU
447	13.3.3.8.1 DefaultFilter_Get eOAMPDU
448	13.3.3.8.2 DefaultFilter_Info eOAMPDU
449	13.3.3.8.3 DefaultFilter_Set eOAMPDU
450	13.3.3.8.4 DefaultFilter_Ack eOAMPDU 13.3.4 eOAMPDU return codes
451	13.4 DPoE eOAM management 13.4.1 eOAMPDU structure 13.4.1.1 eOAMPDU frame format
452	13.4.1.2 TLV-oriented structure 13.4.1.2.1 Variable Descriptor TLV 13.4.1.2.2 Variable Container TLV
454	13.4.1.2.3 TLVs carrying large values 13.4.1.3 TLVs for 802.3 OAMPDUs 13.4.1.3.1 Extended Information TLV
455	13.4.1.3.2 Event Notification TLV
457	13.4.1.3.2.1 LoS (0x11) 13.4.1.3.2.2 Key Exchange Failure (0x12) 13.4.1.3.2.3 Port Disabled (0x21) 13.4.1.3.2.4 Power Failure (0x41) 13.4.1.3.2.5 Statistics Alarm (0x81)
458	13.4.1.3.2.6 ONU Busy (0x82) 13.4.1.3.2.7 MAC Table Overflow (0x83) 13.4.1.4 Multipart eOAMPDU response sequence
459	13.4.2 eOAMPDU 13.4.2.1 eOAMPDU codes
460	13.4.2.2 eOAM_Get_Request eOAMPDU 13.4.2.3 eOAM_Get_Response eOAMPDU
461	13.4.2.4 eOAM_Set_Request eOAMPDU 13.4.2.5 eOAM_Set_Response eOAMPDU
462	13.4.2.6 eOAM_MC_Control eOAMPDU
463	13.4.2.7 eOAM_MC_Register eOAMPDU
464	13.4.2.8 eOAM_MC_Response eOAMPDU 13.4.2.9 eOAM_MC_ControlResponse eOAMPDU
465	13.4.2.10 eOAM_Software eOAMPDU 13.4.2.10.1 eOAM_Software eOAMPDU structure
466	13.4.2.10.2 eOAM_Software_WriteRequest eOAMPDU
467	13.4.2.10.3 eOAM_Software_FileTransferData eOAMPDU 13.4.2.10.4 eOAM_Software_FileTransferAck eOAMPDU
468	13.4.2.11 eOAM_KeyExchange eOAMPDU
469	13.4.2.11.1 eOAM_KeyExchange eOAMPDU structure 13.4.2.11.2 eOAM_KeyExchange_Assign eOAMPDU
470	13.4.2.11.3 eOAM_KeyExchange_ACK eOAMPDU
471	13.4.2.12 eOAM_Early_WakeUpOLT eOAMPDU 13.4.2.13 eOAM_Early_WakeUpONU eOAMPDU
472	13.4.2.14 eOAM_Sleep_Allowed eOAMPDU 13.4.3 eOAMPDU return codes
474	14 Management entities 14.1 Introduction 14.2 Management entities for non-SNMP-optimized eOAM profile 14.2.1 Branch 0x07 “basic attributes” 14.2.1.1 Attribute aPhyAdminState (0x07/0x00-25)
475	14.2.1.2 Attribute aAutoNegAdminState (0x07/0x00-4F) 14.2.1.3 Attribute aAutoNegLocalTechnologyAbility (0x07/0x00-52)
476	14.2.1.4 Attribute aAutoNegAdvertisedTechnologyAbility (0x07/0x00-53) 14.2.1.5 Attribute aFECAbility (0x07/0x01-39) 14.2.1.6 Attribute aFECmode (0x07/0x01-3A)
477	14.2.2 Branch 0xC7 “extended attributes”
478	14.2.2.1 Attribute aOnuSerialNumber (0xC7/0x00-01)
479	14.2.2.2 Attribute aOnuChipsetFwVer (0xC7/0x00-02)
480	14.2.2.3 Attribute aOnuChipsetId (0xC7/0x00-03)
481	14.2.2.4 Attribute aOnuTRxStatus (0xC7/0x00-05)
482	14.2.2.5 Attribute aOnuCapabilities (0xC7/0x00-07)
484	14.2.2.6 Attribute aOnuConfigTimeDrift (0xC7/0x00-08)
485	14.2.2.7 Attribute aOnuConfigSnmpGlobal1 (0xC7/0x00-09)
487	14.2.2.8 Attribute aOnuConfigSnmpGlobal2 (0xC7/0x00-0A)
488	14.2.2.9 Attribute aOnuConfigPonActive (0xC7/0x00-0B)
489	14.2.2.10 Attribute aOnuCapabilitiesExt (0xC7/0x00-0C)
490	14.2.2.11 Attribute aOnuCapabilitiesPwrSav (0xC7/0x00-0D)
491	14.2.2.12 Attribute aOnuConfigPwrSav (0xC7/0x00-0E)
492	14.2.2.13 Attribute aOnuConfigProtection (0xC7/0x00-0F)
493	14.2.2.14 Attribute aOnuConfigHguTr069 (0xC7/0x00-C1)
494	14.2.2.15 Attribute aPortEthStatus (0xC7/0x00-11)
495	14.2.2.16 Attribute aPortEthFlowControl (0xC7/0x00-12) 14.2.2.17 Attribute aPortEthPolicingUs (0xC7/0x00-13)
497	14.2.2.18 Attribute aPortEthPolicingDs (0xC7/0x00-16)
498	14.2.2.19 Attribute aPortLoopDetection (0xC7/0x00-17) 14.2.2.20 Attribute aPortDisableLooped (0xC7/0x00-18)
499	14.2.2.21 Attribute aPortVLAN (0xC7/0x00-21)
503	14.2.2.22 Attribute aPortClassAndMark (0xC7/0x00-31)
507	14.2.2.23 Attribute aMulticastVidConfig (0xC7/0x00-41)
508	14.2.2.24 Attribute aMulticastVlanOpConfig (0xC7/0x00-42)
510	14.2.2.25 Attribute aMulticastControlMode (0xC7/0x00-43) 14.2.2.26 Attribute aMulticastControlTable (0xC7/0x00-44)
515	14.2.2.27 Attribute aMulticastGroupCountMax (0xC7/0x00-45) 14.2.2.28 Attribute aFastLeaveCapab (0xC7/0x00-46)
516	14.2.2.29 Attribute aFastLeaveAdminStatus (0xC7/0x00-47)
517	14.2.2.30 Attribute aOnuTxPowerSupplyControl (0xC7/0x00-A1)
518	14.2.2.31 Attribute aOnuEdpConfigM (0xC7/0x00-A2)
519	14.2.2.32 Attribute aOnuEdpConfigS (0xC7/0x00-A3)
521	14.2.2.33 Attribute aMacAgeTimeConfig (0xC7/0x00-A4)
522	14.2.2.34 Attribute aPerfMonAdminStatus (0xC7/0x00-B1)
523	14.2.2.35 Attribute aPerfMonDataCurrent (0xC7/0x00-B2)
529	14.2.2.36 Attribute aPerfMonDataHistory (0xC7/0x00-B3)
536	14.2.3 Branch 0x37 “identification” 14.2.3.1 Object_ID TLV
537	14.2.3.1.1 ObjectType field 14.2.3.1.2 ObjectInstance field
538	14.2.3.2 Examples of Object_ID TLV use cases (informative)
540	14.2.4 Branch 0x09 “basic actions” 14.2.4.1 Action acOnuUniAdminStatus (0x09/0x00-05)
541	14.2.4.2 Action acOnuUniAutoNegRestart (0x09/0x00-0B) 14.2.4.3 Action acOnuUniNegAdminStatus (0x09/0x00-0C)
542	14.2.5 Branch 0xC9 “extended actions” 14.2.5.1 Action acOnuReboot (0xC9/0x00-01) 14.2.5.2 Action acOnuSleepControl (0xC9/0x00-02)
543	14.2.5.3 Action acFastLeaveAdminControl (0xC9/0x00-48)
544	14.2.5.4 Action acMLOnuMode (0xC9/0x02-02)
545	14.3 Management entities for SNMP-optimized eOAM profile 14.3.1 Branch 0xB7 “extended attributes”
546	14.3.1.1 Attribute aOnuEncryptionConfig (0xB7/0x00-01) 14.3.1.2 Attribute aQosQueueSetLimit (0xB7/0x00-05)
547	14.3.1.3 Attribute aQosFlowControl (0xB7/0x00-09)
548	14.3.1.4 Attribute aQueueSize (0xB7/0x00-0A)
550	14.3.1.5 Attribute aVlanMode (0xB7/0x00-0B) 14.3.1.6 Attribute aOnuErroredFrameWindow (0xB7/0x00-0C)
551	14.3.1.7 Attribute aOnuErroredFrameThr (0xB7/0x00-0D) 14.3.1.8 Attribute aQosPolicerRate (0xB7/0x00-0F)
552	14.3.1.9 Attribute aQosPolicerBurst (0xB7/0x00-10)
553	14.3.1.10 Attribute aUnipLinkMode (0xB7/0x00-11)
554	14.3.1.11 Attribute aVlanTagFilter (0xB7/0x00-13)
555	14.3.1.12 Attribute aVlanTagValue (0xB7/0x00-14)
556	14.3.1.13 Attribute aVlanPonVIDValue (0xB7/0x00-15)
557	14.3.1.14 Attribute aOnuFEC (0xB7/0x00-16)
558	14.3.1.15 Attribute aMcastFilterOperation (0xB7/0x00-17)
559	14.3.1.16 Attribute aOnuMACAddressLearning (0xB7/0x00-1C)
560	14.3.1.17 Attribute aPsEligibleModesCapability (0xB7/0x00-20) 14.3.1.18 Attribute aPsEarlyWakeupCapability (0xB7/0x00-21)
561	14.3.1.19 Attribute aPsSleepIndCapability (0xB7/0x00-22) 14.3.1.20 Attribute aPsAckCapability (0xB7/0x00-23)
562	14.3.1.21 Attribute aPsPowerOnDelay (0xB7/0x00-24)
563	14.3.1.22 Attribute aPsEarlyWakeupConfig (0xB7/0x00-27) 14.3.1.23 Attribute aPsSleepIndConfig (0xB7/0x00-28)
564	14.3.1.24 Attribute aPsAckEnableConfig (0xB7/0x00-29) 14.3.1.25 Attribute aPsSleepDurationConfig (0xB7/0x00-2A)
565	14.3.1.26 Attribute aPsActiveDurationConfig (0xB7/0x00-2B) 14.3.1.27 Attribute aPsHoldDurationConfig (0xB7/0x00-2C)
566	14.3.1.28 Attribute aPonpTemperature (0xB7/0x00-30) 14.3.1.29 Attribute aPonpOpticalTRxSupplyVoltage (0xB7/0x00-31)
567	14.3.1.30 Attribute aPonpOpticalTxBiasCurrent (0xB7/0x00-32) 14.3.1.31 Attribute aPonpOpticalTxOutputPower (0xB7/0x00-33)
568	14.3.1.32 Attribute aPonpOpticalRxInputPower (0xB7/0x00-34) 14.3.1.33 Attribute aUnipTosCosConversion (0xB7/0x00-35)
570	14.3.1.34 Attribute aPtHoldOverTimeOut (0xB7/0x00-38) 14.3.1.35 Attribute aPtTLoSOptical (0xB7/0x00-39)
571	14.3.1.36 Attribute aPtTLoSMAC (0xB7/0x00-3A) 14.3.1.37 Attribute aOnuSystemInfo (0xB7/0x00-40)
574	14.3.1.38 Attribute aUnipInfo (0xB7/0x00-41)
575	14.3.1.39 Attribute aOnuPriorityQueueCount (0xB7/0x00-42) 14.3.1.40 Attribute aUnipTargetQueuePriority (0xB7/0x00-43)
577	14.3.1.41 Attribute aOnuSoftwareDownloadInfo (0xB7/0x00-44)
578	14.3.1.42 Attribute aOnuConfig (0xB7/0x00-45)
579	14.3.2 Branch 0xB6 “object identification” 14.3.2.1 Object_ID TLV 14.3.2.1.1 ObjectType field
580	14.3.2.1.2 ObjectInstance field 14.3.2.2 Example of Object_ID TLV use cases (informative)
583	14.3.3 Branch 0xB9 “extended actions” 14.3.3.1 Action acOnuRestart (0xB9/0x00-0E) 14.3.3.2 Action acSoftwareDownload (0xB9/0x00-12)
584	14.4 Management entities for DPoE eOAM profile 14.4.1 Branch 0xD6 “identification” 14.4.1.1 Object Context TLV
585	14.4.1.1.1 ObjectType field 14.4.1.1.2 ObjectInstance field 14.4.1.1.2.1 ObjectInstance field for ONU (0xD6/0x00-00)
586	14.4.1.1.2.2 ObjectInstance field for PON Port (0xD6/0x00-01) 14.4.1.1.2.3 ObjectInstance field for LLID (0xD6/0x00-02) 14.4.1.1.2.4 ObjectInstance field for UNI Port (0xD6/0x00-03)
587	14.4.1.1.2.5 ObjectInstance field for Queue (0xD6/0x00-04) 14.4.2 Branch 0x07 “basic attributes”
589	14.4.3 Branch 0xD7 “extended attributes”
591	14.4.3.1 ONU management 14.4.3.1.1 Sequence TLV (0xD7/0x00-01)
592	14.4.3.1.2 Attribute aOnuId (0xD7/0x00-02) 14.4.3.1.3 Attribute aOnuFwVersion (0xD7/0x00-03)
593	14.4.3.1.4 Attribute aOnuInfoChipset (0xD7/0x00-04)
594	14.4.3.1.5 Attribute aOnuInfoDateManufacture (0xD7/0x00-05)
595	14.4.3.1.6 Attribute aOnuInfoManufacturer (0xD7/0x00-06) 14.4.3.1.7 Attribute aOnuLlidCount (0xD7/0x00-07)
596	14.4.3.1.8 Attribute aOnuPonPortCount (0xD7/0x00-08) 14.4.3.1.9 Attribute aOnuUniPortCount (0xD7/0x00-09)
597	14.4.3.1.10 Attribute aOnuInfoPacketBuffer (0xD7/0x00-0A)
598	14.4.3.1.11 Attribute aLlidReportThresholds (0xD7/0x00-0B)
599	14.4.3.1.12 Attribute aLlidForwardState (0xD7/0x00-0C)
600	14.4.3.1.13 Attribute aLlidOamFrameRate (0xD7/0x00-0D)
601	14.4.3.1.14 Attribute aOnuManOrgName (0xD7/0x00-0E) 14.4.3.1.15 Attribute aOnuCvcCvsValidity (0xD7/0x00-0F)
602	14.4.3.1.16 Attribute aOnuUniPortType (0xD7/0x00-10)
603	14.4.3.2 Bridging 14.4.3.2.1 Attribute aUniDynMacTableSize (0xD7/0x01-01)
604	14.4.3.2.2 Attribute aUniDynMacAgeLimit (0xD7/0x01-02) 14.4.3.2.3 Attribute aUniDynMacTable (0xD7/0x01-03)
605	14.4.3.2.4 Attribute aUniStatMacTable (0xD7/0x01-04)
606	14.4.3.2.5 Attribute aUniPortAutoNeg (0xD7/0x01-05)
607	14.4.3.2.6 Attribute aUniAdmissionControl (0xD7/0x01-06)
608	14.4.3.2.7 Attribute aUniMinLearnMacCount (0xD7/0x01-07) 14.4.3.2.8 Attribute aUniMaxLearnMacCount (0xD7/0x01-08)
609	14.4.3.2.9 Attribute aOnuMaxLearnMacCount (0xD7/0x01-09) 14.4.3.2.10 Attribute aUniLengthDiscard (0xD7/0x01-0A)
610	14.4.3.2.11 Attribute aUniFloodUnknown (0xD7/0x01-0B) 14.4.3.2.12 Attribute aUniLocalSwitching (0xD7/0x01-0C)
611	14.4.3.2.13 Attribute aOnuLlidQueueConfig (0xD7/0x01-0D)
613	14.4.3.2.14 Attribute aOnuFwFileName (0xD7/0x01-0E) 14.4.3.2.15 Attribute aUniMacTableFull (0xD7/0x01-0F)
614	14.4.3.3 Statistics and counters 14.4.3.3.1 Attribute aCountRxFramesGreen (0xD7/0x02-01) 14.4.3.3.2 Attribute aCountTxFramesGreen (0xD7/0x02-02)
615	14.4.3.3.3 Attribute aCountRxFrames2Short (0xD7/0x02-03) 14.4.3.3.4 Attribute aCountRxFrames64 (0xD7/0x02-04)
616	14.4.3.3.5 Attribute aCountRxFrames65to127 (0xD7/0x02-05) 14.4.3.3.6 Attribute aCountRxFrames128to255 (0xD7/0x02-06)
617	14.4.3.3.7 Attribute aCountRxFrames256to511 (0xD7/0x02-07) 14.4.3.3.8 Attribute aCountRxFrames512to1023 (0xD7/0x02-08)
618	14.4.3.3.9 Attribute aCountRxFrames1024to1518 (0xD7/0x02-09)
619	14.4.3.3.10 Attribute aCountRxFrames1519 (0xD7/0x02-0A) 14.4.3.3.11 Attribute aCountTxFrames64 (0xD7/0x02-0B)
620	14.4.3.3.12 Attribute aCountTxFrames65to127 (0xD7/0x02-0C) 14.4.3.3.13 Attribute aCountTxFrames128to255 (0xD7/0x02-0D)
621	14.4.3.3.14 Attribute aCountTxFrames256to511 (0xD7/0x02-0E) 14.4.3.3.15 Attribute aCountTxFrames512to1023 (0xD7/0x02-0F)
622	14.4.3.3.16 Attribute aCountTxFrames1024to1518 (0xD7/0x02-10) 14.4.3.3.17 Attribute aCountTxFrames1519 (0xD7/0x02-11)
623	14.4.3.3.18 Attribute aQueueDelayThr (0xD7/0x02-12) 14.4.3.3.19 Attribute aQueueDelayValue (0xD7/0x02-13)
624	14.4.3.3.20 Attribute aCountFramesDropped (0xD7/0x02-14) 14.4.3.3.21 Attribute aCountOctetsDropped (0xD7/0x02-15)
625	14.4.3.3.22 Attribute aCountOctetsDelayed (0xD7/0x02-16) 14.4.3.3.23 Attribute aCountUsOctetsUnused (0xD7/0x02-17)
626	14.4.3.3.24 Attribute aPonOptMonitTemp (0xD7/0x02-1D) 14.4.3.3.25 Attribute aPonOptMonitVcc (0xD7/0x02-1E)
627	14.4.3.3.26 Attribute aPonOptMonitBias (0xD7/0x02-1F) 14.4.3.3.27 Attribute aPonOptMonitTxPower (0xD7/0x02-20)
628	14.4.3.3.28 Attribute aPonOptMonitRxPower (0xD7/0x02-21) 14.4.3.3.29 Attribute aCounterRxFramesY (0xD7/0x02-22)
629	14.4.3.3.30 Attribute aCounterTxFramesY (0xD7/0x02-23) 14.4.3.3.31 Attribute aCounterTxOctetsG (0xD7/0x02-24)
630	14.4.3.3.32 Attribute aCounterRxOctetsY (0xD7/0x02-25) 14.4.3.3.33 Attribute aCounterRxOctetsG (0xD7/0x02-26)
631	14.4.3.3.34 Attribute aCounterTxOctetsY (0xD7/0x02-27) 14.4.3.3.35 Attribute aCounterTxFramesL2Unicast (0xD7/0x02-28)
632	14.4.3.3.36 Attribute aCounterTxFramesL2Multicast (0xD7/0x02-29) 14.4.3.3.37 Attribute aCounterTxFramesL2Broadcast (0xD7/0x02-2A)
633	14.4.3.3.38 Attribute aCounterRxFramesL2Unicast (0xD7/0x02-2B) 14.4.3.3.39 Attribute aCounterRxFramesL2Multicast (0xD7/0x02-2C)
634	14.4.3.3.40 Attribute aCounterRxFramesL2Broadcast (0xD7/0x02-2D) 14.4.3.3.41 Attribute aOnuCounterNumber (0xD7/0x02-2E)
635	14.4.3.3.42 Attribute aCounterRxFramesL2CP (0xD7/0x02-2F) 14.4.3.3.43 Attribute aCounterRxOctetsL2CP (0xD7/0x02-30)
636	14.4.3.3.44 Attribute aCounterTxFramesL2CP (0xD7/0x02-31) 14.4.3.3.45 Attribute aCounterTxOctetsL2CP (0xD7/0x02-32)
637	14.4.3.3.46 Attribute aCounterDiscardFramesL2CP (0xD7/0x02-33) 14.4.3.3.47 Attribute aCounterDiscardOctetsL2CP (0xD7/0x02-34)
638	14.4.3.3.48 Attribute aCounterL2TxErrors (0xD7/0x02-35) 14.4.3.3.49 Attribute aCounterL2RxErrors (0xD7/0x02-36)
639	14.4.3.4 Alarms 14.4.3.4.1 Attribute aAlarmPortStatThr (0xD7/0x03-01)
640	14.4.3.4.2 Attribute aAlarmLlidStatThr (0xD7/0x03-02)
641	14.4.3.4.3 Attribute aAlarmStatusControl (0xD7/0x03-03)
643	14.4.3.5 Encryption 14.4.3.5.1 Attribute aEncryptionKeyExpiration (0xD7/0x04-01)
644	14.4.3.5.2 Attribute aEncryptionMode (0xD7/0x04-02) 14.4.3.6 Frame processing 14.4.3.6.1 Attribute aRuleSetConfig (0xD7/0x05-01)
645	14.4.3.6.1.1 aRuleSetConfig.sClause sub-attribute
648	14.4.3.6.1.2 aRuleSetConfig.sResult sub-attribute
651	14.4.3.6.1.3 Port Ingress Rule TLV
655	14.4.3.6.2 Attribute aRuleCustomField (0xD7/0x05-02)
657	14.4.3.6.2.1 Preamble/L2 Header layer
658	14.4.3.6.2.2 IEEE 802.1ah layer 14.4.3.6.2.3 EtherType layer 14.4.3.6.2.4 S-VLAN layer
659	14.4.3.6.2.5 C-VLAN layer 14.4.3.6.2.6 Multiprotocol Label Switching (MPLS) layer 14.4.3.6.2.7 IPv4 layer
660	14.4.3.6.2.8 IPv6 field 14.4.3.6.2.9 Generic L3 layer 14.4.3.6.2.10 TCP/UDP layer
661	14.4.3.6.2.11 Generic L4 layer 14.4.3.6.3 Attribute aRuleTpidCAlter (0xD7/0x05-03)
662	14.4.3.6.4 Attribute aRuleTpidSAlter (0xD7/0x05-04)
663	14.4.3.6.5 Attribute aRuleIpmcFwrConfig (0xD7/0x05-05)
664	14.4.3.6.6 Attribute aRuleTpidIAlter (0xD7/0x05-06)
665	14.4.3.6.7 Attribute aRuleTpidBAlter (0xD7/0x05-07)
666	14.4.3.7 Service-level agreements (SLAs) 14.4.3.7.1 Attribute aRateLimitBroadcast (0xD7/0x06-01) 14.4.3.7.2 Attribute aQueueCIR (0xD7/0x06-04)
667	14.4.3.7.3 Attribute aFecMode (0xD7/0x06-05)
668	14.4.3.7.4 Attribute aQueueEIR (0xD7/0x06-06)
669	14.4.3.7.5 Attribute aQueueColorMarking (0xD7/0x06-07)
671	14.4.3.7.6 Attribute aQueueRateLimiterCap (0xD7/0x06-08)
673	14.4.3.7.7 Attribute aCouplingFlag (0xD7/0x06-09) 14.4.3.8 Power saving 14.4.3.8.1 Attribute aOnuPwrSavingCap (0xD7/0xFF-FF)
674	14.4.3.9 Clock transport 14.4.3.9.1 Attribute aClockTranspCapab (0xD7/0x07-01)
675	14.4.3.9.2 Attribute aClockTranspStatus (0xD7/0x07-02)
676	14.4.3.9.3 Attribute aClockTranspTransfer (0xD7/0x07-03)
677	14.4.3.9.4 Attribute aClockTranspPropagParam (0xD7/0x07-04)
678	14.4.3.9.5 Attribute aClockTranspRtt (0xD7/0x07-05) 14.4.3.10 Demarc auto-configuration 14.4.3.10.1 Attribute aDacConfig (0xD7/0x08-00)
679	14.4.3.10.2 Attribute aDacConfigFlags (0xD7/0x08-01)
681	14.4.3.10.3 Attribute aDacPassChallenge (0xD7/0x08-02) 14.4.3.10.4 Attribute aDacStatus (0xD7/0x08-03)
682	14.4.4 Branch 0x09 “basic actions” 14.4.5 Branch 0xD9 “extended actions”
683	14.4.5.1 ONU management 14.4.5.1.1 Action acOnuReboot (0xD9/0x00-01) 14.4.5.2 Bridging 14.4.5.2.1 Action acMacClearDynamicTable (0xD9/0x01-01) 14.4.5.2.2 Action acMacAddDynamicAddress (0xD9/0x01-02)
684	14.4.5.2.3 Action acMacDeleteDynamicAddress (0xD9/0x01-03)
685	14.4.5.2.4 Action acMacClearStaticTable (0xD9/0x01-04) 14.4.5.2.5 Action acMacAddStaticAddress (0xD9/0x01-05)
686	14.4.5.2.6 Action acMacDeleteStaticAddress (0xD9/0x01-06)
687	14.4.5.3 Statistics and counters 14.4.5.3.1 Action acCountersClear (0xD9/0x02-01) 14.4.5.4 Alarms 14.4.5.4.1 Action acAlarmGetCurrentSummary (0xD9/0x03-01)
688	14.4.5.5 Frame processing 14.4.5.5.1 Action acRulesClearAll (0xD9/0x05-01) 14.4.5.5.2 Action acRulesAddOne (0xD9/0x05-02) 14.4.5.5.3 Action acRulesDeleteOne (0xD9/0x05-03) 14.4.5.6 Transmission control 14.4.5.6.1 Action acEnableUserTraffic (0xD9/0x06-01)
689	14.4.5.6.2 Action acDisableUserTraffic (0xD9/0x06-02) 14.4.5.6.3 Action acLoopbackEnable (0xD9/0x06-03)
690	14.4.5.6.4 Action acLoopbackDisable (0xD9/0x06-04) 14.4.5.6.5 Action acLaserTxPowerOff (0xD9/0x06-05)
691	14.4.6 Branch 0xD8 “programmable counters” 14.4.6.1 Attribute aCounterGeneralN (0xD8/0x00-00 to 0xD8/0x7F-FF)
692	Annex 4A (normative) Protocol implementation conformance statement (PICS) for Package A 4A.1 Introduction
693	4A.2 ONU-specific PICS 4A.2.1 Implementation identification 4A.2.2 Protocol summary 4A.2.3 REPORT MPCP format
694	4A.2.4 Report queue length calculation 4A.2.5 Queue service discipline 4A.2.6 ONU transceiver status monitoring
695	4A.2.7 Events
696	4A.2.8 Data encryption 4A.2.9 ONU authentication 4A.2.10 Management
699	4A.2.11 Device and capability discovery
700	4A.2.12 Software update 4A.2.13 Management entities
713	4A.2.14 Port-specific loopback
714	4A.2.15 Power saving
715	4A.2.16 ONU VLAN modes 4A.2.17 ONU tunneling modes
716	4A.2.18 Multicast connectivity
717	4A.3 OLT-specific PICS 4A.3.1 Implementation identification 4A.3.2 Protocol summary 4A.3.3 REPORT MPCP format
718	4A.3.4 OLT transceiver status monitoring
719	4A.3.5 Events 4A.3.6 Data encryption 4A.3.7 ONU authentication 4A.3.8 Management
722	4A.3.9 Device and capability discovery
723	4A.3.10 Software update 4A.3.11 Management entities
733	4A.3.12 Port-specific loopback 4A.3.13 Power saving
734	4A.3.14 OLT VLAN modes 4A.3.15 OLT tunneling modes
735	4A.3.16 Multicast connectivity
736	4A.3.17 Multicast connectivity, coexistence
737	Annex 4B (normative) PICS for Package B 4B.1 Introduction
738	4B.2 ONU-specific PICS 4B.2.1 Implementation identification 4B.2.2 Protocol summary 4B.2.3 REPORT MPCP format
740	4B.2.4 Report queue length calculation 4B.2.5 Queue service discipline
741	4B.2.6 Discovery and configuration of queue parameters
742	4B.2.7 ONU transceiver status monitoring
743	4B.2.8 Events 4B.2.9 Optical link protection, trunk type 4B.2.10 Data encryption 4B.2.11 ONU authentication
744	4B.2.12 Management
749	4B.2.13 Device and capability discovery 4B.2.14 Software update
750	4B.2.15 Management entities
753	4B.2.16 Power saving
754	4B.2.17 ONU VLAN modes
756	4B.2.18 Multicast connectivity
757	4B.3 OLT-specific PICS 4B.3.1 Implementation identification 4B.3.2 Protocol summary 4B.3.3 REPORT MPCP format
758	4B.3.4 Report queue length calculation 4B.3.5 Queue service discipline
759	4B.3.6 Discovery and configuration of queue parameters 4B.3.7 OLT transceiver status monitoring
760	4B.3.8 Events 4B.3.9 Optical link protection, trunk type
761	4B.3.10 Data encryption 4B.3.11 ONU authentication
762	4B.3.12 Management
764	4B.3.13 Device and capability discovery
765	4B.3.14 Software update 4B.3.15 Management entities
768	4B.3.16 Power saving
769	4B.3.17 OLT VLAN modes
770	4B.3.18 Multicast connectivity
771	4B.3.19 Multicast connectivity, coexistence
772	Annex 4C (normative) PICS for Package C 4C.1 Introduction
773	4C.2 ONU-specific PICS 4C.2.1 Implementation identification 4C.2.2 Protocol summary 4C.2.3 Support for EDP
774	4C.2.4 REPORT MPCP format 4C.2.5 Report queue length calculation
775	4C.2.6 Queue service discipline 4C.2.7 ONU transceiver status monitoring 4C.2.8 UNI port loop detection
776	4C.2.9 Remote ONU transmitter power supply control 4C.2.10 Events
778	4C.2.11 Trunk protection 4C.2.12 Tree protection
779	4C.2.13 ONU authentication
780	4C.2.14 Management
785	4C.2.15 Device and capability discovery
786	4C.2.16 Software update
787	4C.2.17 Management entities
794	4C.2.18 Power saving
795	4C.2.19 Performance monitoring
796	4C.2.20 ONU VLAN modes
798	4C.2.21 Multicast connectivity
800	4C.2.22 MAC aging
801	4C.3 OLT-specific PICS 4C.3.1 Implementation identification 4C.3.2 Protocol summary 4C.3.3 Support for EDP
802	4C.3.4 REPORT MPCP format 4C.3.5 OLT transceiver status monitoring 4C.3.6 UNI port loop detection
803	4C.3.7 Remote ONU transmitter power supply control 4C.3.8 Events
804	4C.3.9 Trunk protection 4C.3.10 Tree protection
805	4C.3.11 ONU authentication
806	4C.3.12 Management
809	4C.3.13 Device and capability discovery
810	4C.3.14 Software update
811	4C.3.15 Management entities
816	4C.3.16 Power saving
818	4C.3.17 Performance monitoring 4C.3.18 OLT VLAN modes
820	4C.3.19 Multicast connectivity
823	4C.3.20 Multicast connectivity, coexistence
824	4C.3.21 MAC aging
825	Annex 5A (informative) Relation to other architecture models 5A.1 Introduction 5A.2 Relation to the BBF TR-200 architecture model 5A.2.1 A single-customer ONU architecture
826	5A.2.2 A multi-customer ONU architecture
827	5A.3 Relation to the MEF 10.2 architecture model
828	Annex 7A (normative) EPON Data Path (EDP) of BBF TR-200 7A.1 Introduction 7A.2 EDP definition 7A.3 EDP identification 7A.4 EDP implementation
831	7A.5 EDP management
832	Annex 9A (informative) Measurement of bRTT in trunk-protected EPON 9A.1 Introduction 9A.2 Method 1: dynamic measurement of bRTT
833	9A.3 Method 2: post-switchover measurement of bRTT

Additional information

Standard Title	IEEE Standard for Service Interoperability in Ethernet Passive Optical Networks (SIEPON)
Published Code	IEEE
Publication Date	2013
Pages Count	834

Preview PDF


PDF Format	Searchable	Printable	Preview Now

IEEE 1904.1-2013

PDF Catalog

Related products