IEEE 2030.1.1-2015
$53.63
IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles
| Published By | Publication Date | Number of Pages |
| IEEE | 2015 | 97 |
New IEEE Standard – Active. Direct-current (dc) charging is a method of charging that facilitates rapid energy transfer from the electric grid to plug-in vehicles. This method of charging allows significantly more current to be drawn by the vehicle versus lower rated alternating-current (ac) systems. A combination of vehicles that can accept high-current dc charge and the dc supply equipment that provides it has led to the use of terminology such as “fast charging,” “fast charger,” “dc charger,” “quick charger,” etc. DC charging and ac charging vary by the location at which ac current is converted to dc current. For typical dc charging, the current is converted at the off-board charger, which is separate from the vehicle. For ac charging, the current is converted inside the vehicle, by means of an on-board charger. The location of the ac to dc conversion equipment, or converter, shapes the complexity of the equipment design. Regarding ac charging, as previously mentioned, the conversion is on board the vehicle. This allows the original equipment maker (OEM) designed systems to control the charging operation in its entirety. The on-board charger (converter) and battery controller solution is under direct control of the vehicle manufacturer. For dc charging, an entirely new challenge exists for OEMs. The dc charger is now external to the vehicle and requires the vehicle engineers to control an external power device. For the reason of necessary interoperability, standards such as IEEE Std 2030.1.1 are provided to assist developers.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 2 | IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles |
| 3 | Acknowledgments |
| 4 | Important Notices and Disclaimers Concerning IEEE Standards Documents Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents Translations |
| 5 | Official statements Comments on standards Laws and regulations Copyrights Photocopies |
| 6 | Updating of IEEE Standards documents Errata Patents |
| 7 | Participants |
| 8 | Introduction |
| 9 | Contents |
| 11 | IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles 1. Scope 2. Normative references |
| 12 | 3. Definitions 3.1 Vehicle terms 3.2 Charger terms |
| 13 | 3.3 Communications terms 4. Conventions 4.1 General |
| 14 | 4.2 Binary representation 4.3 Hexadecimal representation |
| 15 | 4.4 Decimal representation 4.5 Transmission sequence 4.6 Formulas 4.7 Units of measure 5. Common requirements 5.1 Background |
| 16 | 5.2 Requirements |
| 17 | Annex A (normative)CHAdeMO specifications A.1 Scope of application A.2 Vehicle coupler A.3 Installation conditions and main specifications |
| 19 | A.4 Requirements for basic design of the charger and the vehicle |
| 21 | A.5 Circuit requirements |
| 35 | A.6 Communication control |
| 41 | A.7 Charging Control |
| 51 | A.8 Error definition |
| 56 | A.9 EMC performance (emission) |
| 64 | A.10 Welding detection procedure by the vehicle |
| 66 | A.11 Charging Sequence |
| 76 | A.12 Introduction of unintended current flow through “Connector proximity detection” line and countermeasures to prevent it |
| 77 | A.13 Guideline for the user instruction using screen display of charger A.14 Guideline for the emergency stop of charger |
| 80 | A.15 Regulation regarding the charger output voltage (Japan) A.16 Pin assignment of the charging connector |
| 82 | A.17 Shape and dimensions of the charging connector |
| 89 | Annex B (normative)Technical specifications for combination ac/dc charging systems for use with electric vehicles B.1 Overview B.2 Applicable normative references |
| 90 | Annex C (informative)Charging connector temperature rise testing C.1 Overview C.2 Test description |
| 92 | C.3 Test procedure |
| 94 | Annex D (informative)Bibliography |
Related products
-
IEEE 2030.2.1 2019
IEEE-2030.2.1-2019: IEEE Guide for Design, Operation, and Maintenance of Battery Energy Storage Systems, both Stationary…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
IEEE 802.11u-2011
IEEE Standard for Information Technology-Telecommunications and information exchange between systems-Local and Metropolitan networks-specific requirements-Part II:…
-
IEEE 1394-2008(Redline)
IEEE Standard for a High-Performance Serial Bus (Redline) Published By Publication Date Number of Pages…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
IEEE 802.1Q-2018
IEEE Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks (Superseded Redline) Published By…
-
IEEE 1149.7-2022
IEEE Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture Published By Publication…
-
IEEE 1394 2008
IEEE Standard for a High-Performance Serial Bus Published By Publication Date Number of Pages IEEE…
-
IEEE 45.1-2017
IEEE Recommended Practice for Electrical Installations on Shipboard–Design Published By Publication Date Number of Pages…
-
IEEE 802.11ac 2013
IEEE Standard for Information technology– Telecommunications and information exchange between systemsLocal and metropolitan area networks–…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
IEEE/ISO/IEC 8802 3:2017/Amd6 2018
ISO/IEC/IEEE International Standard – Information technology – Telecommunications and information exchange between systems – Local…
-
IEEE 8802-3-2014
ISO/IEC/IEEE International Standard for Ethernet Published By Publication Date Number of Pages IEEE 2014 3754
-
IEEE 8802-3:2017/Amd 6-2018
ISO/IEC/IEEE International Standard – Information technology – Telecommunications and information exchange between systems – Local…
-
IEEE 802.1Q-2014
IEEE Standard for Local and metropolitan area networks–Bridges and Bridged Networks Published By Publication Date…
-
IEEE 8802-3-2014
ISO/IEC/IEEE International Standard for Ethernet Published By Publication Date Number of Pages IEEE 2014 3754
-
IEEE 802.3bn 2016
IEEE Standard for Ethernet Amendment 6: Physical Layer Specifications and Management Parameters for Ethernet Passive…
-
IEEE 2030.101 2018
IEEE Guide for Designing a Time Synchronization System for Power Substations Published By Publication Date…
-
IEEE P1149.7:2022 Edition
IEEE Approved Draft Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture Published…
-
IEEE 1149.7-2022
IEEE Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture Published By Publication…
-
IEEE 802.3bn-2016
IEEE Standard for Ethernet Amendment 6: Physical Layer Specifications and Management Parameters for Ethernet Passive…
-
IEEE P802.1Q REV D2.0 January2014 DRAFT
IEEE Draft Standard for Local and metropolitan area networks–Bridges and Bridged Networks Published By Publication…
-
IEEE 1149.7-2022(Redline)
IEEE Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture (Redline) Published By…
-
RI EnergyCode 2019 1stptg
Rhode Island Energy Conservation Code, 1st Printing Published By Publication Date Number of Pages RI…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
IEEE ISO IEC 8802 3:2017 Amd6 2018
ISO/IEC/IEEE International Standard – Information technology – Telecommunications and information exchange between systems – Local…
-
IEEE 1394-2008
IEEE Standard for a High-Performance Serial Bus Published By Publication Date Number of Pages IEEE…
-
IEEE 802.3-2018
IEEE Standard for Ethernet (Superseded Redline) Published By Publication Date Number of Pages IEEE 2018…
-
IEEE 802.1Q-2018(Redline)
IEEE Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks (Redline) Published By Publication…
-
IEEE 802.11af 2014
IEEE Standard for Information technology – Telecommunications and information exchange between systems – Local and…
-
IEEE 802.15.4m-2014
IEEE Standard for Local and metropolitan area networks – Part 15.4: Low-Rate Wireless Personal Area…
-
IEEE 802.3-2018
IEEE Standard for Ethernet (Superseded Redline) Published By Publication Date Number of Pages IEEE 2018
-
IEEE 2030.100 2017
IEEE Recommended Practice for Implementing an IEC 61850-Based Substation Communications, Protection, Monitoring, and Control System…
-
IEEE 45.1 2017
IEEE Recommended Practice for Electrical Installations on Shipboard–Design Published By Publication Date Number of Pages…
-
IEEE 2030.1.1 2016
IEEE Approved Draft Standard Technical Specifications of a DC Quick Charger for Use with Electric…
-
IEEE ISO IEC 8802 3 2014
ISO/IEC/IEEE International Standard for Ethernet Published By Publication Date Number of Pages IEEE 2014 3754
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Approved Draft) Published By…
-
IEEE 1149.7-2022
IEEE Standard for Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture Published By Publication…
-
IEEE P802.1Q REV D2.2 July2014 DRAFT
IEEE Draft Standard for Local and metropolitan area networks–Bridges and Bridged Networks Published By Publication…
