IEEE 386-1985
$31.96
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V
| Published By | Publication Date | Number of Pages |
| IEEE | 1985 | 30 |
New IEEE Standard – Superseded. Service conditions, ratings, interchangeable construction features, and tests for load-break and dead-break separable insulated connector systems rated 601 V and above, 600 A or less, for use on power distribution systems, are established. Included are: corona voltage-level tests, dielectric tests, short-time current test, switching test, fault-closure test, current-cycling tests, accelerated sealing-life test, cable pull-out test, operating-force test, operating-eye test, test-point cap test, test-point tests, and shielding test.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 4 | 200A Load-Break Interface 15.2 kV and 15.2 kV/26.3 kV 200A Load-Break Interface No |
| 9 | 1 Scope 2 References 3 Definitions |
| 10 | Typical Components of 200A Separable Insulated Connector System |
| 11 | Typical Components of 600A Separable Insulated Connector System |
| 12 | 4 Service Conditions 4.1 Usual Service Conditions 4.2 Unusual Service Conditions 5 Ratings and Characteristics 5.1 Voltage Ratings 5.2 Current Ratings Table 1 Voltage Ratings and Characteristics |
| 13 | 6 Construction 6.1 Identification 6.2 Operating Means 6.3 Shielding 6.4 Interchangeability 6.5 Test Point 6.6 HOld-DoW Bails Table 2 Current Ratings and Characteristics |
| 14 | 200A Bushing-Well Interface 8.3 kV 15.2 kV and 21.1 kV |
| 15 | 200A Dead-Break Interface 8.3 kV and 152 kV |
| 16 | 200A Load-Break Interface 8.3 kV and 8.3 kV114.4 kV |
| 17 | 200A Load-Break Probe and Elbow 8.3 kV and 8.3 kV114.4 kV |
| 18 | 21.1kV and 21.1kV/36.6kV |
| 19 | 200A Load-Break Interface No 1 21.1 kV and 21.1 kV/36.6kV |
| 20 | 200 A Dead-Break Interface 21.1 kV |
| 21 | Fig 10 600A Dead-Break Interface 8.3 kV and 15.2 kV |
| 22 | Fig 11 600A Dead-Break Interface 21.1 kV |
| 23 | 7 Testing 7.1 Production Tests 7.2 Design Tests 7.3 Test Conditions Corona Voltage Level 7.5 Dielectric Tests Table 3 Design Tests |
| 24 | 7.6 Short-Time Current Test 7.7 Switching Test Table 4 Voltage Conditions for Switching Test Table 5 Elbow Spacing for Switching and Fault-Closure Tests |
| 25 | Fig 12 Circuit Diagrams for Switching Current Tests |
| 26 | 7.8 Fault-Closure Test Fig 13 Circuit Diagrams for Fault-Closure Tests Table 6 Voltage Conditions for Fault-Closure Test |
| 27 | Current-Cycling Test for Uninsulated Components of 200 A and 600 A Connectors 7.10 Current-Cycling Test for 200 A Insulated Connectors |
| 28 | 7.1 1 Current-Cycling Test for 600 A Insulated Connectors Fig 14 Operating Force Test for Option B |
| 29 | 7.12 Accelerated Sealing Life Test 7.13 Cable Pull-out Test 7.14 Operating-Force Test 7.15 Operating-Eye Test |
| 30 | 7.16 Test-Point Cap Test 7.17 Test-Point Tests 7.18 Shielding Test |
Related products
-
IEEE 382 1985
IEEE Standard for Qualification of Actuators for Power Operated Valve Assemblies with Safety-Related Functions for…
-
IEEE 286 1975
IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation Published…
-
IEEE 1028-1988
IEEE Standard Software Reviews and Audits Published By Publication Date Number of Pages IEEE 1988…
-
IEEE 382 1980
IEEE Standard for Qualification of Safety Related Valve Actuators Published By Publication Date Number of…
-
IEEE 386 1985
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V Published…
-
IEEE 622 1987
IEEE Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear…
-
IEEE 586 1980
IEEE Standard Definitions of Laser-Maser Terms Published By Publication Date Number of Pages IEEE 1980…
-
IEEE 690 1984
IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in…
-
IEEE 446-1995
IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications Published…
-
IEEE 635 1989
IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables Published By Publication…
-
IEEE 384 1981
IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits Published By Publication Date…
-
IEEE 387 1995:1996 Edition
IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating…
-
IEEE 386-1995
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V Published…
-
ANSI IEEE C57.12.00 1980
American National Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers Published By Publication…
-
IEEE 336-1985
IEEE Standard Installation, Inspection and Testing Requirements for Power, Instrumentation, and Control Equipment at Nuclear…
-
IEEE 387 1984
IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating…
-
IEEE 376-1975
IEEE Standard for the Measurement of Impulse Strength and Impulse Bandwidth Published By Publication Date…
-
IEEE 113 1984
IEEE Guide: Test Procedures for Direct-Current Machines Published By Publication Date Number of Pages IEEE…
-
IEEE 336-1980
IEEE Standard Installation, Inspection, and Testing Requirements for Class 1E Power, Instrumentation and Electric Equipment…
-
IEEE 113-1985
IEEE Guide: Test Procedures for Direct-Current Machines Published By Publication Date Number of Pages IEEE…
-
IEEE 753 1983
IEEE Standard Functional Methods and Equipment for Measuring the Performance of Dial-Pulse (DP) Address Signaling…
-
IEEE C37.34 1995
IEEE Standard Test Code for High-Voltage Air Switches Published By Publication Date Number of Pages…
-
IEEE 575 1987
IEEE Guide for Application of Sheath-Bonding Methods for Single-Conductor Cables and the Calculation of Induced…
-
IEEE 382-1980
IEEE Standard for Qualification of Safety Related Valve Actuators Published By Publication Date Number of…
-
IEEE 1028 1989
IEEE Standard Software Reviews and Audits Published By Publication Date Number of Pages IEEE 1989…
-
IEEE C37.20.1-1987
IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit-Breaker Switchgear Published By Publication Date Number of Pages…
-
ANSI IEEE 336 1980
IEEE Standard Installation, Inspection, and Testing Requirements for Class 1E Power, Instrumentation and Electric Equipment…
-
IEEE 930 1987
IEEE Guide for the Statistical Analysis of Electrical Insulation Voltage Endurance Data Published By Publication…
-
IEEE 387-1995
IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating…
-
IEEE 1344 1995
Standard for Synchrophasors for Power Systems Published By Publication Date Number of Pages IEEE 1995…
-
IEEE 382-1985
IEEE Standard for Qualification of Actuators for Power Operated Valve Assemblies with Safety-Related Functions for…
-
IEEE 386 1995
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V Published…
-
IEEE 12207.1 1997:1998 Edition
IEEE/EIA Guide – Industry Implementation of International Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) –…
-
IEEE C37.20.1 1987
IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit-Breaker Switchgear Published By Publication Date Number of Pages…
-
IEEE 380 1975
IEEE Definitions of Terms Used in IEEE Standards on Nuclear Power Generating Stations Published By…
-
IEEE 376 1975
IEEE Standard for the Measurement of Impulse Strength and Impulse Bandwidth Published By Publication Date…
-
IEEE 1003.1-1988
IEEE Standard Portable Operating System Interface for Computer Environments Published By Publication Date Number of…
-
IEEE 336 1985
IEEE Standard Installation, Inspection and Testing Requirements for Power, Instrumentation, and Control Equipment at Nuclear…
-
IEEE 951 1988
IEEE Guide to the Assembly and Erection of Metal Transmission Structures Published By Publication Date…
-
IEEE 1184 1995
IEEE Guide for the Selection and Sizing of Batteries for Uninterruptible Power Systems Published By…
