IEEE 517 1974
$118.08
IEEE Standard Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating Gyros
| Published By | Publication Date | Number of Pages |
| IEEE | 1974 | 79 |
New IEEE Standard – Active. A specification format guide for the preparation of a rate-integrating gyro specification that provides a common meeting ground of terminology and practice for manufacturers and users is presented. A compilation of recommended procedures for testing a rate-integrating gyro is given. An errata is available at http://standards.ieee.org/reading/ieee/updates/errata/517-1974_errata.pdf
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Title Page |
| 3 | Introduction |
| 4 | Participants |
| 5 | CONTENTS |
| 7 | Part I—Specification Format 1. Scope 2. Applicable Documents 2.1 Specifications |
| 8 | 2.2 Standards 2.3 Drawings 2.4 Bulletins 2.5 Other Publications 3. Requirements 3.1 Description 3.2 General Requirements |
| 9 | 3.3 Performance |
| 16 | 3.4 Mechanical Requirements |
| 17 | 3.5 Electrical Requirements |
| 19 | 3.6 Environmental Requirements |
| 23 | 3.7 Reliability |
| 24 | 4. Quality Assurance Provisions 4.1 Classification of Tests 4.2 Acceptance Tests |
| 25 | 4.3 Qualification Tests |
| 26 | 4.4 Reliability Tests 4.5 Test Conditions and Equipment 4.6 Test Methods |
| 29 | 4.7 Data Submittal |
| 30 | 5. Preparation for Delivery 6. Notes 6.1 Intended Use 6.2 Ordering Data 6.3 Model Equation |
| 32 | Part II—Test Procedure 7. Scope 8. Description 8.1 Angular Displacement Sensing 8.2 Angular Rate Sensing 8.3 Model Equation 9. Test Conditions and Test Equipment 9.1 Standard Test Conditions |
| 35 | 9.2 Standard Operating and Test Equipment 10. Test Procedures 10.1 Examination of Product (Mechanical) 10.2 Examination of Product (Electrical) |
| 37 | 10.3 Leak Test |
| 38 | 10.4 Polarity |
| 39 | 10.5 Operating Temperature Test Series |
| 42 | 10.6 Pickoff Test Series |
| 43 | 10.7 Torquer Test Series |
| 45 | 10.8 Rotor Rotation Detector |
| 46 | 10.9 Spin Motor Test Series |
| 47 | 10.10 Axis Alignment |
| 49 | 10.11 Input Angle Test Series |
| 50 | 10.12 Gyro Transfer Characteristic Test Series |
| 53 | 10.13 Drift Rate Test Series |
| 62 | 10.14 Output Noise |
| 64 | 10.15 Dynamic Response Test Series |
| 66 | 10.16 Angular Acceleration Sensitivity About the Output Axis |
| 67 | 10.17 Generated Fields |
| 68 | 10.18 Environmental Test Series |
| 70 | Annex A—Rate-integrating Gyro Design Features |
| 71 | Annex B—Equatorial Tumble Test Suggested Data Reduction Procedure |
Related products
-
IEEE 465.1 1977
IEEE Standard Test Specifications for Gas Tube Surge Protecting Devices Published By Publication Date Number…
-
IEEE 176-1978
IEEE Standard On piezoelectricity Published By Publication Date Number of Pages IEEE 1978 57
-
IEEE C57.12.80 1978
Standard Terminology for Power and Distribution Transformers Published By Publication Date Number of Pages IEEE…
-
IEEE 960 1177 1994
IEEE Standard FASTBUS Modular High-Speed Data Acquisition and Control System and IEEE FASTBUS Standard Routines…
-
IEEE 517-1974
IEEE Standard Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating Gyros Published By Publication…
-
IEEE 311 1970
IEEE Standard Specification of General-Purpose Laboratory Cathode-Ray Oscilloscopes Published By Publication Date Number of Pages…
-
IEEE 518 1977
IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers…
-
IEEE 317 1972
IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations Published…
-
IEEE 511-1979
IEEE Standard on Video Signal Transmission Measurement of Linear Waveform Distortion Published By Publication Date…
-
IEEE 336 1971
IEEE Standard Installation, Inspection, and Testing requirements for Instrumentation, and Electric Equipment During the Construction…
-
IEEE C57.12.80-1978
IEEE Standard Terminology for Power and Distribution Transformers Published By Publication Date Number of Pages…
-
IEEE 387 1977
IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating…
-
IEEE 117-1974
IEEE Standard Test Procedure for Evaluation of Systems of Insulating Materials for Random-Wound AC Electric…
-
IEEE 577-1976
IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for…
-
IEEE 978 1984
IEEE Guide for In-Service Maintenance and Electrical Testing of Live-Line Tools Published By Publication Date…
-
IEEE 511-1974
IEEE Trial-Use Standard on Video Signal Transmission Measurement of Linear Waveform Distortion Published By Publication…
-
IEEE 563 1978
IEEE Guide on Conductor Self-Damping Measurements Published By Publication Date Number of Pages IEEE 1978…
-
IEEE 511 1974
IEEE Trial-Use Standard on Video Signal Transmission Measurement of Linear Waveform Distortion Published By Publication…
-
IEEE 117-1974
IEEE Standard Test Procedure for Evaluation of Systems of Insulating Materials for Random-Wound AC Electric…
-
IEEE 618 1984
IEEE Standard Measurement of Luminance Signal-to-Noise Ratio in Video Magnetic-Tape Recording Systems Published By Publication…
-
IEEE 529 1981
Supplement for Strapdown Applications to IEEE Standard Specification Format Guide and Test Procedure for Single-Degree-of-Freedom…
-
IEEE 317-1971
IEEE Standard for Electrical Penetration Assemblies in Containment Structures for Nuclear Fueled Power Generating Stations…
-
IEEE C57.12.44-1994
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEE…
-
IEEE 309-1970
IEEE Standard Test Procedure for Geiger-Müller Counters Published By Publication Date Number of Pages IEEE…
-
IEEE 351 1972
IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part II – Characterization…
-
IEEE C57.12.44 1994
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEE…
-
IEEE 309 1970
IEEE Standard Test Procedure for Geiger-Mller Counters Published By Publication Date Number of Pages IEEE…
-
IEEE 269 1971
IEEE Standard Method for Measuring Transmission Performance of Telephone Sets Published By Publication Date Number…
-
IEEE 511 1979
IEEE Standard on Video Signal Transmission Measurement of Linear Waveform Distortion Published By Publication Date…
-
IEEE 1353 1994
IEEE Standard for Information Technology–ASCE and Presentation Layer Services–Application Program Interface (API) [C Language Binding]…
-
IEEE 392 1976
IEEE Recommended Practice for Achieving High Reliability in Electronics Transformers and Inductors Published By Publication…
-
IEEE 317 1976
IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations Published…
-
IEEE 577 1976
IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for…
-
IEEE 317-1972
IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations Published…
-
IEEE 465.1-1977
IEEE Standard Test Specifications for Gas Tube Surge Protecting Devices Published By Publication Date Number…
-
IEEE 117 1974
IEEE Standard Test Procedure for Evaluation of Systems of Insulating Materials for Random-Wound AC Electric…
-
IEEE 336-1971
IEEE Standard Installation, Inspection, and Testing requirements for Instrumentation, and Electric Equipment During the Construction…
-
IEEE 117-1974
IEEE Standard Test Procedure for Evaluation of Systems of Insulating Materials for Random-Wound AC Electric…
-
IEEE 317-1976
IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations Published…
-
IEEE 351-1972
IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part II – Characterization…
