IEEE 605-2008
$71.50
IEEE Guide for Bus Design in Air Insulated Substations (Superseded Redline)
| Published By | Publication Date | Number of Pages |
| IEEE | 2008 |
Revision Standard – Inactive-Reserved. A proper design of the substation bus ensures a safe and reliable operation of the substation and the power system. Two different types of buses are used in substations, the rigid bus and the strain (cable). This guide provides information on the different bus arrangements used in substations stating the advantages and disadvantages of each. Also it provides information as related to each bus type and construction. Once the bus type is selected, this guide provides the calculation tools for each bus type. Based on these calculations, the engineer can specify the bus size, forces acting on the bus structure, number of mounting structures required, and hardware requirements.
Related products
-
IEEE C37.118 2006
IEEE Standard for Synchrophasors for Power Systems Published By Publication Date Number of Pages IEEEā¦
-
IEEE C37.16-2009
IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V andā¦
-
IEEE 605-2008
IEEE Guide for Bus Design in Air Insulated Substations (Superseded Redline) Published By Publication Dateā¦
-
IEEE 1591.2 2017:2018 Edition
IEEE Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cableā¦
-
IEEE C50.13 2006
IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA andā¦
-
IEEE 386-2006
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V Publishedā¦
-
IEEE 386 2007
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V Publishedā¦
-
IEEE 205-2001
IEEE Standard on Television: Measurement of Luminance Signal Levels Published By Publication Date Number ofā¦
-
IEEE C37.16-2009
IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V andā¦
-
IEEE 635 2004
IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables Published By Publicationā¦
-
IEEE 603 2009
IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations Published By Publication Dateā¦
-
IEEE C57.12.23-2018
IEEE Standard for Submersible Single-Phase Transformers:250 kVA and Smaller; High Voltage 34 500 GrdY/19 920ā¦
-
IEEE C57.12.24 2009
IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19ā¦
-
IEEE 1653.2-2009
IEEE Standard for Uncontrolled Traction Power Rectifiers for Substation Applications Up to 1500 V DCā¦
-
IEEE C37.16-2009
IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V andā¦
-
IEEE C57.12.23-2018(Redline)
IEEE Standard for Submersible Single-Phase Transformers:250 kVA and Smaller; High Voltage 34 500 GrdY/19 920ā¦
-
IEEE 605-2008
IEEE Guide for Bus Design in Air Insulated Substations (Superseded Redline) Published By Publication Dateā¦
-
IEEE 602 2007
IEEE Recommended Practice for Electric Systems in Health Care Facilities Published By Publication Date Numberā¦
-
IEEE 386-2006
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V Publishedā¦
-
IEEE 1100 2006
IEEE Recommended Practice for Powering and Grounding Electronic Equipment Published By Publication Date Number ofā¦
-
IEEE 1653.2-2009
IEEE Standard for Uncontrolled Traction Power Rectifiers for Substation Applications Up to 1500 V DCā¦
-
IEEE 605-2008
IEEE Guide for Bus Design in Air Insulated Substations (Inactive Reserved) Published By Publication Dateā¦
-
IEEE STD 1100 2005:2006 Edition
IEEE Std 1100-2005 (Revision of IEEE Std 1100-1999) IEEE Recommended Practice for Powering and Groundingā¦
-
IEEE 1610 2008
IEEE Guide for the Application of Faulted Circuit Indicators for 200 / 600 A, Three-phaseā¦
-
IEEE 1512.3 2002
IEEE Standard for Hazardous Material Incident Management Message Sets for Use by Emergency Management Centersā¦
-
IEEE 1147-2005
IEEE Guide for the Rehabilitation of Hydroelectric Power Plants (Superseded) Published By Publication Date Numberā¦
-
IEEE C62.23 2017:2018 Edition
IEEE Application Guide for Surge Protection of Electric Generating Plants Published By Publication Date Numberā¦
-
IEEE 603 2018
IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations Published By Publication Dateā¦
-
IEEE 344 2005
IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stationsā¦
-
IEEE C37.16 2009
IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V andā¦
-
IEEE C57.12.23 2009
IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 Vā¦
-
IEEE C57.12.51-2008
IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-ā¦
-
IEEE C57.12.24-2009
IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19ā¦
-
IEEE C37.16-2009
IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V andā¦
-
IEEE 650 2006
IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Powerā¦
-
IEEE 386-2006
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V Publishedā¦
-
IEEE 650-2006
IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Powerā¦
-
IEEE 605-2008
IEEE Guide for Bus Design in Air Insulated Substations (Inactive Reserved) Published By Publication Dateā¦
-
IEEE 605-2008
IEEE Guide for Bus Design in Air Insulated Substations (Superseded Redline) Published By Publication Dateā¦
-
IEEE C57.12.23-2009
IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 Vā¦
