IEEE 716 1985

$35.21

IEEE Standard C/ATLAS Test Language

Published By	Publication Date	Number of Pages
IEEE	1985	439

Guaranteed Safe Checkout

Category: IEEE

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

– Inactive – Superseded. The intent of this document, ANSI/IEEE Std 716-1985, IEEE Standard Common ATLAS (ClATLAS), is to define a high order language which is a subset of Level 18 of IEEE Std 416, Abbreviated Test Language for All Systems (ATLAS). The language described in this document is to be used for the writing of test programs for Units Under Test (UUTs), so that these programs can operate on various makes and models of Automatic Test Equipment (ATE). The subset is defined in terms of two sections. Section A consists of essential verbs and syntax structures; Section B consists of nouns, noun modifiers and units that are selectable, depending upon the application.

PDF Catalog

PDF Pages	PDF Title
19	1.0 Purpose Language Processors 1.2 Document Control 2.0 Reference Material 2.1 Applicable Documents
20	2.2 Document Precedence 2.3 Document Organization and Conventions
22	3.0 Complete ATLAS Test Program Complete ATLAS Test Program Structure
24	3.2 Basic Statement Elements
28	6.0 Preamble Statements 6.1
29	6.2
38	6.4 DEFINE Statements Definition
39	6.5 DEFINE MESSAGE Statement
40	6.6 DEFINE Statement
44	6.7 PROCEDURE Definition 6.7.1 DEFINE PROCEDURE Structure
45	6.7.2 DEFINE PROCEDURE Statement
46	6.7.3 PROCEDURE Body
47	6.7.4 LEAVE Statement
48	6.7.5 END PROCEDURE Statement 6.8 REQUIRE Statement
54	6.9 INCLUDE Statement
68	9.2 INPUT Statement
69	9.3 OUTPUT Statement
72	10.0 Procedural Statements Control
73	10.1 IF-THEN-ELSE Capability 10.1.1 IF-THEN-ELSE Structure
76	10.1.3 (IF-THEN-ELSE)
77	10.1.4 LEAVE IF Statement
78	10.1.5 ELSE Statement 10.1.6 END IF Statement
79	10.2 WHILE-THEN Capability 10.2.1 WHILE-THEN Structure
80	10.2.2 WHILE-THEN Statement 10.2.3 (WHILE-THEN)
81	10.2.4 LEAVE WHILE Statement
82	10.2.5 END WHILE Statement
83	10.3 FOR-THEN Capability 10.3.1 FOR-THEN Structure
84	10.3.2 FOR-THEN Statement
85	10.3.3 (FOR-THEN)
86	10.3.4 LEAVE FOR Statement 10.3.5 END FOR Statement
87	10.4 GO TO Statement
88	10.5 PERFORM Statement
89	10.6 FINISH Statement
90	11.0 Procedural Statements Signal 11.1 Signal Oriented Statements
92	1 1.2 Single-Action Verbs 1 1.2.1 Single-Action Verbs General Description
95	1 1.2.2 SETUP Statement
96	11.2.3 CONNECT Statement
97	11.2.4 DISCONNECT Statement
98	1 1.2.5 CLOSE Statement
99	11.2.6 OPEN Statement
100	11.2.7 INITIATE Statement
101	11.2.8 FETCH Statement
102	11.2.9 COUPLE Statement 11.2.10 UNCOUPLE Statement 11.3 APPLY Statement
103	11.4 REMOVE Statement
105	11.5 MEASURE Statement
106	11.6 MONITOR Statement
107	11.7 VERIFY Statement
108	11.8 READ Statement
109	12.0 Procedural Statements Timing 12.1 TIMING Statements (General)
111	12.2 DELAY Statement
113	12.4 WAIT FOR Event Statement
114	12.5 TIME INTERVAL Measurement Capability 12.5.1 TIME INTERVAL Measurement Structure
115	12.5.2 START Statement 12.5.3 START WHEN Statement
116	12.5.4 STOP Statement
117	12.5.5 STOP WHEN Statement 12.5.6 DISABLE TIME INTERVAL Statement
118	12.6 Synchronization Capability SYNC WHEN Statement
121	13.0 Procedural Statements Macros 13.1 DO DIGITAL TEST
126	13.2 The STIM-ONLY Function
129	13.3 The RESP-COMP Function
132	13.4 The STIM-RESP-SAVE Function
134	13.5 The STIM-RESP-COMP Function
138	13.6 The RESP-ONLY Function
140	13.7 The RESP-SELECT Function
142	13.8 Illustrations of DO Statements
143	13.9 Ancillary Source and Sensor Statements
144	13.10 Illustration of Test Function Sequences
146	14.0 Field and Subfield Definitions 14.1
148	14.2
150	14.4 14.5 <real errlid (Real Error Limit)
153	14.6 <dim lid (Dimension Limit) 14.7 (Percent Limit)
154	14.8
155	14.9
161	Statement Characteristic) 14.1 1
162	14.12 14.13
163	14.14 14.15
164	14.16
165	14.17 14.18 <con& (Connnection Field)
167	14.19 (Connection Set)
174	14.20 14.21
175	14.22 14.23
176	14.24 14.25
177	14.26 14.27
178	14.28
179	14.29 14.30
180	14.31 14.32 Uist range>
181	14.33
182	14.34 14.35
183	14.36 14.37
184	14.38
185	14.40
186	14.41
187	14.42 14.43
188	14.44
190	14.47 14.48
191	14.49 14.50
193	15.0 Language Component Specification 15.1 Authorized Characters
194	15.2 Number Representations
195	15.3 Flag and Statement Numbers
197	15.4 Blank Space Requirements 15.5 Labels
198	15.6 Retention of Labelled Information
200	15.7 Range Subfield
201	15.8 Dimensions
204	15.9 Character Code Definitions
207	15.10 Special Character Sets
211	16.0 Nouns and Their Modifiers
213	16.1 AC SIGNAL (Alternating Current Signal)
216	16.3 COMMON
218	16.4 Deleted 16.5 DC SIGNAL
220	16.6 DIGITAL TEST
221	16.7 DISPLACEMENT
222	16.8 DME (Distance Measuring Equipment)
223	16.9 DOPPLER 16.10 EARTH
224	16.11 EVENTS
225	16.12 FM SIGNAL (Frequency Modulation Signal)
226	16.13 HEAT 16.14 ILS (Instrument Landing System)
229	16.15 IMPEDANCE 16.16 LIGHT
230	16.17 LOGIC CONTROL
234	16.18 LOGIC DATA
235	16.19 LOGIC LOAD
236	16.20 LOGIC REFERENCE
237	16.21 MANOMETRIC
238	16.22 PAM (Pulse Amplitude Modulation)
239	16.23 PULSED AC (Pulsed Alternating Current Signal)
240	16.24 PULSED DC (Pulsed Direct Current Signal)
241	16.25 PULSED DOPPLER
242	16.26 RAMP SIGNAL
243	16.27 RANDOM NOISE 16.28 RESOLVER
244	16.29 ROTATION
250	16.30 SHORT
251	16.31 SQUARE WAVE
253	16.34 SYNCHRO
260	16.36 TIME INTERVAL 16.37 TRIANGULAR WAVE SIGNAL
261	16.38 VOR (VHF Omnidirectional Radio Range)
263	16.39 WAVEFORM
265	16.40 ADF (Automatic Direction Finder)
266	16.41 ATC (Air Traffic Control)
269	16.42 IFF Identification, Friend or Foe)
271	16.43 PM SIGNAL (Phase Modulated Signal)
272	16.44 PULSED AC TRAIN
275	16.45 PULSED DCTRAIN
278	16.46 EM MAGNETIC FIELD (Magnetic Field) 16.47 RADAR SIGNAL
279	16.48 AMBIENT CONDITIONS
280	16.49 FLUID SIGNAL
282	16.50 STEPPER MOTOR (Non-Preferred)
283	TURBINE ENGINE DATA
285	16.52 VIBRATION
286	16.53 Input/Output DEVICE
287	17.0 Noun-Modifier Definitions 17.1 Mnemonics for Pulsed-Type Signals
288	17.2 Modifier Prefixes and Suffixes
291	17.3 Digital Noun Modifiers
292	17.4 AC-COMP (AC Component) 17.5 AC-COMP-FREQ (AC-Component Frequency) 17.6 ALT-RATE (Altitude Rate) 17.7 AMPL-MOD.-C F (Amplitude Modulation; Coarse Fine) 17.8 ANGLE ANGLE-s 17.9 BANDWITH 17.10 BIT-RATE
293	17.11 BURST 17.12 CAP (Capacitance) 17.13 CAR-AMPL (Carrier Amplitude) 17.14 CAR-FREQ (Carrier Frequency) 17.15 CAR-HARMONICS (Carrier Harmonics) 17.16 CAR-PHASE (Carrier Phase)
294	17.17 CAR-RESID (Carrier Residual) 17.18 CIRCULATE/ CIRCULATE CONTINUOUSLY 17.19 COUNT 17.20 CURRENT 17.21 CURRENT-LMT (Current Limit)
295	17.22 CURRENT-ONE/CURRENT-ZERO/ CURRENT-QUIES
297	17.23 DATE 17.24 DC-OFFSET 17.25 DELAY 17.26 DISS-FACTOR (Dissipation Factor) 17.27 DISTANCE 17.28 DISTORTION 17.29 DOPPLER 17.30 DOPPLER-BANDWITH 17.31 DOPPLER-FREQ
298	17.32 DROOP 17.33 DUTY-CYCLE 17.34 EFF (Efficiency) 17.35 ERROR 17.36 ERROR-INDEX 17.37 FALL-TIME 17.38 FAULT-COUNT 17.39 FORMAT (As Used with Input/Output Statements)
299	17.40 FORMAT (As Used with the LOGIC or DIGITAL TEST Nouns)
300	17.41 FREQ (Frequency) 17.42 FREQ-DEV (Frequency Deviation) FREQ-QUIES (Frequency-Quiescent) 17.44 HARMONICS 17.45 ILLUM (Illumination)
301	17.46 IND (Inductance) 17.47 1DENT.SIG IDENT-SIG-EP (Identification Signal)
302	17.48 LUMINANCE 17.49 LUM-FLUX (Luminous Flux) 17.50 LUM-INT (Luminous Intensity) 17.51 LUM-TEMP (Luminous Temperature) 17.52 MASK-ONE 17.53 MASK-ZERO 17.54 MAX-TIME (Maximum Time) 17.55 MOD-AMPL (Modulation Amplitude)
303	17.56 MOD-AMPL-PP (Modulation Amplitude Peak to Peak) 17.57 MOD-DIST (Modulation Distortion) 17.58 MOD-FREQ (Modulation Frequency) 17.59 MOD-OFFSET (Modulation Offset) 17.60 MOD-PHASE (Modulation Phase) 17.61 NEG-SLOPE (Negative Slope) 17.62 NOISE 17.63 NOISE-P (Noise Peak)
304	17.64 NON-HARMONICS 17.65 NON-LIN 17.66 OVERSHOOT 17.67 P-AMPL (Pulse Amplitude) 17.68 PEAK-DEGEN (Peak Degeneration) 17.69 PERIOD
305	17.70 PHASE-ANGLE 17.71 PHASE-JIT (Phase Jitter) 17.72 PHASE-SHIFT 17.73 POS-SLOPE (Positive Slope) 17.74 POWER 17.75 PRESHOOT 17.76 PRESS-A p-PRESS-A Pressure, absolute)
306	17.77 PRESS-G p-PRESS-G Pressure, Gauge) 17.78 PRF (Pulse Repetition Frequency)
307	17.79 PULSE-CLASS
312	17.80 PULSE-SPECT (Pulse Spectrum)
313	17.81 PULSE-WIDTH 17.82 PWR-LMT (Power Limit) 17.83 Q 17.84 QUAD (Quadrature)
314	17.85 REF (Reference) 17.86 REF-PULSES.-INCL,-EXCL DEV (Reference Pulses)
315	17.87 REF-VOLT (Reference Voltage) 17.88 RES (Resistance) 17.89 RESP (Response)
316	17.90 RESP-COMP (Response Compare) 17.9 1 RESP-DELAY (Response Delay) 17.92 RINGING 17.93 RISE-TIME 17.94 RMS-VOLTS (Root Mean Square Voltage) 17.95 ROUNDING 17.96 SAMPLE 17.97 SAMPLE-WIDTH
317	17.98 SETTLE-TIME 17.99 SKEW-TIME 17.100 SLEW-RATE 17.101 STIM (Stimulus) 17.102 STIM-ONLY (Stimulus Only) 17.103 STIM-RESP-COMP (Stimulus Response Compare) 17.104 STIM-RESP-SAVE (Stimulus Response Save)
318	17.105 SYNC (Synchronization)
320	17.106 TEMP p-TEMP-s (Temperature)
321	17.107 TIME 17.108 TIME-ASYM (Time Asymmetry) 17.109 TIME-JIT (Time Jitter) TRANS-SYNC (Transition Synchronization)
324	17.111 TRIG(Trigger) 17.1 12 TYPE 17.113 UNDERSHOOT
325	17.1 14 VALUE
331	17.1 17 VOLTAGE-RAMPED
333	17.127 AM-SHIFT (Amplitude Modulation Shift)
335	17.142 IDENT-SIG-MOD (Identification Signal Modulation)
336	17.143 INT-JITTER (Interrogation Jitter) 17.144 INT-RATE (Interrogation Rate) 17.145 LO-MOD-FREQ (Low Modulation Frequency) 17.146 LOCALIZER 17.147 MAG-BEARING (Magnetic Bearing)
337	17.148 MAG-BEARING-RATE (Magnetic Bearing Rate) 17.149 MARKER-BEACON 17.150 MEAN-MOD (Mean Modulation) 17.151 MOD-INDEX (Modulation Index)
338	17.152 MODE
339	17.153 P3-DEV (P3 Pulse Deviation) 17.154 P3-LEVEL (P3 Pulse Level) 17.155 PAIR-DROOP 17.156 PAIR-SPACING 17.157 PHASE-DEV (Phase Deviation) 17.158 POWER-DIFF (Power Differential) 17.159 PULSE-IDENT (Pulse Identification)
340	17.160 PULSE-POSN-x (Pulse Position of Pulse 17.161 PULSE-SPECT-THRESHOLD 17.162 PULSES-INCL EXCL (Pulses Included Excluded) 17.163 SLANT-RANGE
341	17.164 SLANT-RANGE-ACCEL (Range Acceleration) 17.165 SLANT-RANGE-RATE 17.166 RANGE-PULSE-DEV (Range Pulse Deviation)
342	17.167 RANGE-PULSE-ECHO 17.168 REF-PHASE-FREQ (Reference Phase Modulation Frequency) 17.169 REPLY-EFF (Reply Efficiency)
343	17.170 SLS-DEV (Side-Lobe-Suppression Deviation) 17.17 1 SLS-LEVEL (Side-Lobe-Suppression Level)
344	17.172 SPACING 17.173 SQTR-DIST,SQTR-DIS T-*** (Squitter Distribution) 17.174 SQTR-RATE (Squitter Rate) 17.175 SUB-CAR-FREQ (Sub-carrier Frequency) 17.176 SUB-CAR-MOD (Sub-carrier Modulation) 17.177 SWR (Standing Wave Ratio)
345	17.178 THREE-PHASE-DELTA 17.179 THREE-PHASE-WYE 17.180 VAR-PHASE-FREQ (Variable Phase Frequency) 17.181 VAR-PHASE-MOD (Variable Phase Modulation) 17.182 TRUE
346	17.183 COMPL (Complement) 17.184 RESP-ONLY (Response Only) 17.185 RESP-SELECT (Response Select) 17.186 ALT (Altitude) 17.187 ANGLE-RATE ANGLE-RATE-w 17.188 ANGLE-ACCEL ANGLE-ACCEL-w (Angle Acceleration) 17.189 ATMOS (Standard Model Atmosphere)
347	17.190 ATTEN (Attenuation) FLUX-DENS (Flux Density) 17.192 IAS (Indicated Airspeed) 17.193 RADIAL 17.194 RADIAL-RATE 17.195 REF-INERTIAL Reference, Inertial) 17.196 REF-UUT Reference. UUT)
348	17.197 REL-BEARING (Relative Bearing) 17.198 REL-BEARING-RATE (Relative Bearing Rate) 17.199 TAS (True Airspeed) 17.200 BAROMETRIC-PRESS (Barometric Pressure) 17.20 1 DEBRIS-COUNT
349	17.202 DEBRIS-SIZE 17.203 DEWPOINT 17.204 FLUID-TYPE 17.205 FORCE 17.206 FORCE-RATE 17.207 FUEL-SUPPLY 17.208 HUMIDITY
350	17.209 INCREMENT 17.210 INCREMENT-CONTINUOUS 17.21 1 MASS-FLOW 17.212 PLA (Power Level Angle) 17.213 PLA-RATE (Power Level Angle Rate)
351	17.214 PRESS-RATE p-PRESS-RATE (Pressure Rate) 17.2 15 RELATIVE-HUMIDITY 17.216 RELATIVE-WIND 17.217 ROTOR-SPEED 17.218 SHAFT-SPEED 17.219 SPEC-GRAV (Specific Gravity)
352	17.220 STEPS-PER-REV (Steps per Revolution) 17.221 TARGET-RANGE 17.222 TARGET-RANGE-ACCEL (Target Range Acceleration) 17.223 TARGET-RANGE-RATE 17.224 THRUST 17.225 TORQUE 17.226 VIBRATION-AMPL (Vibration Amplitude) 17.227 VIBRATION-ACCEL (Vibration Acceleration) 17.228 VIBRATION-RATE
353	17.229 VOLUME-FLOW 17.230 WIND-SPEED 17.23 1 FILE-SIZE 17.232 LINE-LENGTH 17.233 PAGE-SIZE
354	17.234 HARD-COPY 17.235 VERT-POSITION 17.236 HORIZ-POSITION 17.237 AM-COMP 17.238 FM-COMP
355	18.0 Standard C/ATLAS Syntax 18.1 Introduction 18.1.1 Purpose 18.1.2 Organization
356	18.1.3 References to the Formal Syntax Definition
357	18.2 Syntax Notation 18.2.1 Syntax Language Elements
361	18.3 Program Structure Syntax 18.3.1 Range and Order of the Definition 18.3.2 Name Conventions 18.3.3 Syntax Definition
365	18.4 Statements and Fields Syntax 18.4.1 Range and Order of the Definition 18.4.2 Name Conventions
366	18.4.3 Notes 18.4.4 Syntax Definition
391	18.5 Lexical Symbols Syntax 18.5.1 Range and Order of the Definition 18.5.2 Name Conventions 18.5.3 Classes of Lexical Symbols
392	18.5.4 Syntax Definition
412	18.6 Cross-Reference Listing of Syntax-Variables and Symbols Cross-reference-list of Rule Names
421	18.6.2 Cross-reference-list of Literals