šŸ”„šŸ”„ Donā€™t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

šŸ”
IEEE 802.16-2009

IEEE 802.16-2009

$237.08

IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Broadband Wireless Access Systems

Published By Publication Date Number of Pages
IEEE 2009 2082
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. Weā€™re here to assist you 24/7.
Email:[email protected]

Revision Standard – Superseded. This standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile point-to-multipoint broadband wireless access (BWA) systems providing multiple services. The MAC is structured to support multiple physical layer (PHY) specifications, each suited to a particular operational environment. The standard enables rapid worldwide deployment of innovative, cost effective, and interoperable multivendor broadband wireless access products, facilitates competition in broadband access by providing alternatives to wireline broadband access, encourages consistent worldwide spectrum allocations and accelerates the commercialization of broadband wireless access systems. The standard is a revision of IEEE Std 802.16-2004, and consolidates material from IEEE 802.16eTM-2005, IEEE 802.16-2004/Cor1-2005, IEEE 802.16fTM-2005 and IEEE 802.16gTM-2007, along with additional maintenance items and enhancements to the management information base specifications. This revision supersedes and makes obsolete IEEE Std 802.16-2004 and all of its subsequent amendments and corrigenda.

PDF Catalog

PDF Pages PDF Title
1 IEEE Std 802.16ā„¢-2009, Front cover
3 Title page
6 Introduction
Conformance test methodology
Notice to users
Laws and regulations
Copyrights
Updating of IEEE documents
7 Errata
Interpretations
Patents
8 Participants
23 Contents
55 List of figures
65 List of tables
79 Important Notice
1. Overview
1.1 Scope
1.2 Purpose
1.3 Variants and frequency bands
80 1.3.1 10ā€“66 GHz licensed bands
1.3.2 Frequencies below 11 GHz
1.3.3 License-exempt frequencies below 11 GHz (primarily 5ā€“6 GHz)
1.3.4 Air interface variant nomenclature and compliance
81 1.4 Reference models
83 1.4.1 Management reference model
1.4.2 Handover (HO) process
1.4.3 IEEE 802.16 entity
84 1.4.4 Network reference model
1.4.4.1 SS/MS and BS Interface
1.4.4.2 IEEE 802.16 entity to NCMS Interface
85 1.4.5 Management SAP (M-SAP)
1.4.6 Control SAP (C-SAP)
1.5 Managed objects
87 2. Normative references
91 3. Definitions
99 4. Abbreviations and acronyms
105 5. Service-specific CS
5.1 ATM CS
5.1.1 CS service definition
5.1.2 Data/Control plane
5.1.2.1 PDU formats
106 5.1.2.2 Classification
107 5.1.2.2.1 VP-switched mode
5.1.2.2.2 VC-switched mode
5.1.2.3 PHS
5.1.2.3.1 PHS for VP-switched ATM connections
108 5.1.2.3.2 PHS for VC-switched ATM connections
5.1.2.4 Signaling procedure
109 5.2 Packet CS
5.2.1 MAC SDU format
110 5.2.2 Classification
111 5.2.3 Payload header suppression (PHS)
112 5.2.3.1 PHS operation
114 5.2.3.2 PHS signaling
115 5.2.4 IEEE 802.3/Ethernet-specific part
5.2.4.1 IEEE 802.3/Ethernet CS PDU format
116 5.2.4.2 IEEE 802.3/Ethernet CS classification rules
5.2.5 IP specific part
5.2.5.1 IP CS PDU format
117 5.2.5.2 IP classification rules
118 5.3 Generic Packet Convergence Sublayer (GPCS)
119 5.3.1 Mapping of the GPCS service to upper layers
5.3.2 Operation of GPCS with SSs that do not support the GPCS
120 5.3.3 GPCS SAP parameters
5.3.4 GPCS_DATA.request
5.3.4.1 Function
5.3.4.2 Semantics of the service primitive
5.3.4.3 When generated
5.3.4.4 Effect of receipt
121 5.3.5 GPCS_DATA.indication
5.3.5.1 Function
5.3.5.2 Semantics of the service primitive
5.3.5.3 When generated
5.3.5.4 Effect of receipt
5.3.6 PHS operation
123 6. MAC common part sublayer
6.1 Point-to-multipoint (PMP) operation overview
124 6.2 Reserved
6.3 Data/Control plane
6.3.1 Addressing and connections
6.3.1.1 Point-to-multipoint (PMP)
125 6.3.2 MAC PDU formats
126 6.3.2.1 MAC header formats
128 6.3.2.1.1 Generic MAC header
129 6.3.2.1.2 MAC header without payload
130 6.3.2.1.2.1 MAC signaling header type I
131 6.3.2.1.2.1.1 Bandwidth request (BR) header
132 6.3.2.1.2.1.2 Bandwidth request and UL Tx power report header
133 6.3.2.1.2.1.3 BR and CINR report header
134 6.3.2.1.2.1.4 CQICH allocation request header
135 6.3.2.1.2.1.5 PHY channel report header
136 6.3.2.1.2.1.6 BR and UL sleep control header
138 6.3.2.1.2.1.7 SN report header
139 6.3.2.1.2.2 MAC signaling header type II
6.3.2.1.2.2.1 Feedback header
143 6.3.2.1.2.2.1.1 MIMO channel feedback header
146 6.3.2.2 MAC subheaders and special payloads
147 6.3.2.2.1 Fragmentation subheader (FSH)
6.3.2.2.2 Grant management subheader (GMSH)
149 6.3.2.2.3 Packing subheader (PSH)
6.3.2.2.4 ARQ feedback
150 6.3.2.2.5 Reserved
6.3.2.2.6 Fast-feedback allocation subheader (FFSH)
6.3.2.2.7 Extended subheader format
153 6.3.2.2.7.1 SDU SN extended subheader
6.3.2.2.7.2 DL sleep control extended subheader
6.3.2.2.7.3 Feedback request extended subheader
154 6.3.2.2.7.4 MIMO mode feedback extended subheader
155 6.3.2.2.7.5 UL Tx power report extended subheader
6.3.2.2.7.6 Mini-feedback extended subheader
6.3.2.2.7.7 SN request extended subheader
156 6.3.2.2.7.8 PDU SN extended subheader
6.3.2.2.7.9 ertPS resumption bitmap extended subheader
6.3.2.2.7.10 Persistent Allocation Error Event
157 6.3.2.3 MAC management messages
160 6.3.2.3.1 DCD (DL channel descriptor) message
161 6.3.2.3.2 DL-MAP (Downlink map) message
162 6.3.2.3.3 UCD (UL channel descriptor) message
164 6.3.2.3.4 UL-MAP (UL map) message
166 6.3.2.3.5 RNG-REQ (ranging request) message
169 6.3.2.3.6 RNG-RSP (ranging response) message
173 6.3.2.3.7 REG-REQ (registration request) message
174 6.3.2.3.8 REG-RSP (registration response) message
177 6.3.2.3.9 Privacy key management (PKM) messages (PKM-REQ/PKM-RSP)
181 6.3.2.3.9.1 SA Add message
6.3.2.3.9.2 Auth Request (authorization request) message
182 6.3.2.3.9.3 Auth Reply (authorization reply) message
183 6.3.2.3.9.4 Auth Reject (authorization reject) message
6.3.2.3.9.5 Key Request message
184 6.3.2.3.9.6 Key Reply message
6.3.2.3.9.7 Key Reject message
185 6.3.2.3.9.8 Authorization Invalid message
186 6.3.2.3.9.9 TEK Invalid message
6.3.2.3.9.10 Auth Info (authentication information) message
187 6.3.2.3.9.11 PKMv2 RSA-Request message
6.3.2.3.9.12 PKMv2 RSA-Reply message
188 6.3.2.3.9.13 PKMv2 RSA-Reject message
6.3.2.3.9.14 PKMv2 RSA-Acknowledgement message
189 6.3.2.3.9.15 PKMv2 EAP-Start message
6.3.2.3.9.16 PKMv2 EAP-Transfer message
190 6.3.2.3.9.17 PKMv2 SA-TEK-Challenge message
191 6.3.2.3.9.18 PKMv2 SA-TEK-Request message
6.3.2.3.9.19 PKMv2 SA-TEK-Response message
192 6.3.2.3.9.20 PKMv2 Key-Request message
6.3.2.3.9.21 PKMv2 Key-Reply message
193 6.3.2.3.9.22 PKMv2 Key-Reject message
194 6.3.2.3.9.23 PKMv2 SA-Addition message
6.3.2.3.9.24 PKMv2 TEK-Invalid message
195 6.3.2.3.9.25 PKMv2 Group-Key-Update-Command message
196 6.3.2.3.9.26 MIH Initial Request message
197 6.3.2.3.9.27 MIH Acknowledge
6.3.2.3.9.28 MIH Comeback Response
198 6.3.2.3.10 DSA-REQ message
6.3.2.3.10.1 SS-Initiated DSA
199 6.3.2.3.10.2 BS-Initiated DSA
6.3.2.3.11 DSA-RSP message
200 6.3.2.3.11.1 SS-Initiated DSA
6.3.2.3.11.2 BS-Initiated DSA
6.3.2.3.12 DSA-ACK message
201 6.3.2.3.13 DSC-REQ (DSC request) message
202 6.3.2.3.14 DSC-RSP (DSC response) message
203 6.3.2.3.15 DSC-ACK (DSC acknowledge) message
204 6.3.2.3.16 DSD-REQ message
205 6.3.2.3.17 DSD-RSP message
206 6.3.2.3.18 MCA-REQ (multicast polling assignment request) message
6.3.2.3.19 MCA-RSP (multicast polling assignment response) message
207 6.3.2.3.20 DBPC-REQ (DL burst profile change request) message
6.3.2.3.21 DBPC-RSP (DL burst profile change response) message
208 6.3.2.3.22 RES-CMD (reset command) message
209 6.3.2.3.23 SBC-REQ (SS basic capability request) message
210 6.3.2.3.24 SBC-RSP (SS basic capability response) message
211 6.3.2.3.25 CLK-CMP (clock comparison) message
212 6.3.2.3.26 DREG-CMD (de/reregister command) message
214 6.3.2.3.27 DSX-RVD (DSx received) message
215 6.3.2.3.28 TFTP-CPLT (Config File TFTP complete) message
216 6.3.2.3.29 TFTP-RSP (Config File TFTP complete response) message
6.3.2.3.30 ARQ-Feedback message
217 6.3.2.3.31 ARQ-Discard message
6.3.2.3.32 ARQ-Reset message
218 6.3.2.3.33 Channel Measurement REP-REQ/RSP (report request/response)
219 6.3.2.3.34 FPC (fast power control) message
220 6.3.2.3.35 AAS-FBCK-REQ/RSP (AAS channel feedback request/response) messages
221 6.3.2.3.36 AAS_Beam_Select message
222 6.3.2.3.37 DREG-REQ (SS deregistration request) message
223 6.3.2.3.38 HARQ MAP message
6.3.2.3.38.1 HARQ MAP message format
225 6.3.2.3.38.2 Format Configuration IE
227 6.3.2.3.38.3 Reduced CID
229 6.3.2.3.38.4 HARQ Control IE
230 6.3.2.3.38.5 CQICH Control IE
232 6.3.2.3.38.6 Compact DL-MAP IE
6.3.2.3.38.6.1 Compact DL-MAP IE for normal subchannel
233 6.3.2.3.38.6.2 Compact DL-MAP IE for band AMC subchannel
235 6.3.2.3.38.6.3 Compact DL-MAP IE for safety subchannel
237 6.3.2.3.38.6.4 Compact DL-MAP IE for DIUC subchannel
238 6.3.2.3.38.6.5 Compact DL-MAP IE for HARQ ACK bitmap
239 6.3.2.3.38.6.6 Compact DL-MAP IE for extension
240 6.3.2.3.38.6.7 MIMO Compact DL-MAP IE format
247 6.3.2.3.38.6.8 HARQ Compact DL-MAP IE format for switch HARQ mode
6.3.2.3.38.6.9 HARQ Compact MBS MAP IE
249 6.3.2.3.38.7 Compact UL-MAP IE
6.3.2.3.38.7.1 Compact UL-MAP IE for normal subchannel
250 6.3.2.3.38.7.2 Compact UL-MAP IE for band AMC subchannel
252 6.3.2.3.38.7.3 Compact UL-MAP IE for safety subchannel
253 6.3.2.3.38.7.4 Compact UL-MAP IE for UIUC subchannel
254 6.3.2.3.38.7.5 Compact UL-MAP IE for HARQ region allocation
255 6.3.2.3.38.7.6 Compact UL-MAP IE for CQICH region allocation
257 6.3.2.3.38.7.7 Compact UL-MAP IE for extension
258 6.3.2.3.38.7.8 Compact UL-MAP IE for allocation start offset
6.3.2.3.38.7.9 MIMO Compact UL-MAP IE format
260 6.3.2.3.38.7.10 SDMA Compact UL-MAP IE format
261 6.3.2.3.39 MOB_SLP-REQ (sleep request) message
264 6.3.2.3.40 MOB_SLP-RSP (sleep response) message
269 6.3.2.3.41 MOB_TRF-IND (traffic indication) message
271 6.3.2.3.42 MOB_NBR-ADV (neighbor advertisement) message
279 6.3.2.3.43 MOB_SCN-REQ (scanning interval allocation request) message
282 6.3.2.3.44 MOB_SCN-RSP (scanning interval allocation response) message
290 6.3.2.3.45 MOB_SCN-REP (scanning result report) message
296 6.3.2.3.46 MOB_ASC-REP (association result report) message
299 6.3.2.3.47 MOB_BSHO-REQ (BS HO request) message
310 6.3.2.3.48 MOB_MSHO-REQ (MS HO request) message
314 6.3.2.3.49 MOB_BSHO-RSP (BS HO response) message
325 6.3.2.3.50 MOB_HO-IND (HO indication) message
327 6.3.2.3.51 MOB_PAG-ADV (BS broadcast paging) message
329 6.3.2.3.52 MBS_MAP (multicast and broadcast service map) message
335 6.3.2.3.53 PMC_REQ (power control mode change request) message
336 6.3.2.3.54 PMC_RSP (power control mode change response) message
338 6.3.2.3.55 OFDMA SUB-DL-UL-MAP message
341 6.3.2.3.56 MIMO precoding setup/tear-down messages
342 6.3.2.3.57 MIH Payload Transfer (MOB_MIH-MSG) message
6.3.2.3.58 Service Identity Information (SII-ADV) message
343 6.3.2.3.59 Location Based Services (LBS-ADV) message
345 6.3.3 Construction and transmission of MAC PDUs
346 6.3.3.1 Conventions
6.3.3.2 Concatenation
6.3.3.3 Fragmentation
347 6.3.3.3.1 Non-ARQ connections
6.3.3.3.2 ARQ-enabled connections
6.3.3.4 Packing
6.3.3.4.1 Packing for non-ARQ connections
6.3.3.4.1.1 Packing fixed-length MAC SDUs
348 6.3.3.4.1.2 Packing variable-length MAC SDUs
349 6.3.3.4.2 Packing for ARQ-enabled connections
350 6.3.3.4.3 Packing ARQ Feedback IEs
351 6.3.3.5 CRC calculation
6.3.3.5.1 CRC32 calculation for SC and OFDM mode
6.3.3.5.1.1 CRC32 test vectors for SC and OFDM mode
352 6.3.3.5.2 CRC32 calculation for OFDMA mode
6.3.3.5.2.1 CRC32 test vectors for OFDMA mode
6.3.3.6 Encryption of MAC PDUs
353 6.3.3.7 Padding
6.3.4 ARQ mechanism
354 6.3.4.1 ARQ block usage
355 6.3.4.2 ARQ Feedback IE format
357 6.3.4.2.1 ARQ Feedback IE format with extended capability
361 6.3.4.3 ARQ parameters
6.3.4.3.1 ARQ_BSN_MODULUS
6.3.4.3.2 ARQ_WINDOW_SIZE
6.3.4.3.3 ARQ_BLOCK_LIFETIME
6.3.4.3.4 ARQ_RETRY_TIMEOUT
6.3.4.3.5 ARQ_SYNC_LOSS_TIMEOUT
6.3.4.3.6 ARQ_RX_PURGE_TIMEOUT
362 6.3.4.3.7 ARQ_BLOCK_SIZE
6.3.4.4 ARQ procedures
6.3.4.4.1 ARQ state machine variables
6.3.4.4.1.1 Transmitter variables
6.3.4.4.1.2 Receiver variables
6.3.4.5 ARQ-enabled connection setup and negotiation
6.3.4.6 ARQ operation
6.3.4.6.1 Sequence number comparison
363 6.3.4.6.2 Transmitter state machine
367 6.3.4.6.3 Receiver state machine
369 6.3.5 Scheduling services
371 6.3.5.1 Outbound transmission scheduling
6.3.5.2 UL request/grant scheduling
6.3.5.2.1 Unsolicited grant service (UGS)
372 6.3.5.2.2 Real-time polling service (rtPS)
6.3.5.2.2.1 Extended rtPS
373 6.3.5.2.3 Non-real-time polling service (nrtPS)
6.3.5.2.4 Best effort (BE) service
6.3.6 Bandwidth allocation and request mechanisms
6.3.6.1 Requests
374 6.3.6.2 Grants
6.3.6.3 Polling
6.3.6.3.1 Unicast polling
376 6.3.6.3.2 Multicast and broadcast polling
378 6.3.6.3.3 PM bit
6.3.6.4 Contention-based focused BRs for WirelessMAN-OFDM
379 6.3.6.5 Contention-based CDMA BRs for WirelessMAN-OFDMA
6.3.7 MAC support of PHY
6.3.7.1 Frequency division duplexing (FDD)
6.3.7.2 Time division duplexing (TDD)
6.3.7.3 DL-MAP message
380 6.3.7.4 UL-MAP message
381 6.3.7.4.1 UL timing
6.3.7.4.2 UL allocations
6.3.7.4.3 UL interval definition
6.3.7.4.3.1 Request IE
6.3.7.4.3.2 Initial Ranging IE
6.3.7.4.3.3 Data Grant Burst Type IEs
382 6.3.7.4.3.4 End Of Map IE
6.3.7.4.3.5 Gap IE
6.3.7.5 Map relevance and synchronization
384 6.3.7.5.1 WirelessMAN-SC PHY
6.3.7.5.2 WirelessMAN-OFDM PHY
6.3.7.5.3 WirelessMAN-OFDMA PHY
6.3.7.6 Optional MAC AAS support of OFDM and OFDMA
6.3.7.6.1 AAS MAC services
385 6.3.7.6.2 MAC control functions
386 6.3.7.6.3 AAS DL synchronization
6.3.7.6.4 Alerting the BS about presence of a new SS in an AAS system
6.3.7.6.5 FDD/TDD support
387 6.3.7.6.6 Requesting bandwidth
6.3.8 Contention resolution
388 6.3.8.1 Transmission opportunities
389 6.3.9 Network entry and initialization
390 6.3.9.1 Scanning and synchronization to the DL
6.3.9.2 Obtain DL parameters
392 6.3.9.3 Obtain UL parameters
394 6.3.9.4 Message flows during scanning and UL parameter acquisition
395 6.3.9.5 Initial ranging and automatic adjustments
396 6.3.9.5.1 Contention-based initial ranging and automatic adjustments
399 6.3.9.6 Ranging parameter adjustment
404 6.3.9.7 Negotiate basic capabilities
407 6.3.9.8 SS authorization and key exchange
6.3.9.9 Registration
412 6.3.9.9.1 IP version negotiation
413 6.3.9.10 Establishing IP connectivity
6.3.9.11 Establishing time of day
414 6.3.9.12 Transferring operational parameters
416 6.3.9.13 Establishing provisioned connections
6.3.9.14 Forcing MSs to perform network entry at once
6.3.10 Ranging
6.3.10.1 DL burst profile management
419 6.3.10.2 UL periodic ranging
422 6.3.10.3 OFDMA-based ranging
423 6.3.10.3.1 Contention-based initial ranging and automatic adjustments
430 6.3.10.3.2 Periodic ranging and automatic adjustments
435 6.3.10.4 CDMA HO ranging and automatic adjustment
6.3.10.4.1 Dedicated ranging and automatic adjustments
436 6.3.11 Update of channel descriptors
438 6.3.12 Assigning SSs to multicast groups
441 6.3.13 Establishment of multicast connections
6.3.14 Quality of service (QoS)
6.3.14.1 Theory of operation
442 6.3.14.2 Service flows
444 6.3.14.3 Object model
445 6.3.14.4 Service classes
446 6.3.14.4.1 Global service classes
451 6.3.14.5 Authorization
6.3.14.6 Types of service flows
6.3.14.6.1 Provisioned service flows
452 6.3.14.6.2 Admitted service flows
6.3.14.6.3 Active service flows
453 6.3.14.7 Service flow creation
6.3.14.7.1 Dynamic service flow creation
6.3.14.7.1.1 Dynamic service flow creationā€”SS-initiated
454 6.3.14.7.1.2 Dynamic service flow creationā€”BS-initiated
6.3.14.8 Dynamic service flow modification and deletion
6.3.14.9 Service flow management
6.3.14.9.1 Overview
455 6.3.14.9.2 Dynamic service flow state transitions
464 6.3.14.9.3 Dynamic service addition (DSA)
6.3.14.9.3.1 SS-initiated DSA
465 6.3.14.9.3.2 BS-initiated DSA
466 6.3.14.9.3.3 DSA state transition diagrams
474 6.3.14.9.4 Dynamic service change (DSC)
475 6.3.14.9.4.1 SS-initiated DSC
6.3.14.9.4.2 BS-initiated DSC
476 6.3.14.9.4.3 DSC state transition diagrams
485 6.3.14.9.5 Connection release
6.3.14.9.5.1 SS-initiated DSD
6.3.14.9.5.2 BS-initiated DSD
486 6.3.14.9.5.3 DSD state transition diagrams
490 6.3.15 Procedures for shared frequency band usage
6.3.15.1 Introduction
491 6.3.15.2 Testing channels for other users (including specific spectrum users)
6.3.15.3 Discontinuing operations after detecting specific spectrum users
6.3.15.4 Detecting specific spectrum users
6.3.15.5 Scheduling for channel testing
492 6.3.15.6 Requesting and reporting of measurements
6.3.15.7 Selecting and advertising a new channel
6.3.16 MAC support for HARQ
494 6.3.16.1 Subpacket generation
495 6.3.16.2 DL/UL ACK/NAK signaling
6.3.16.3 HARQ parameter signaling
6.3.17 DL CINR report operation
6.3.17.1 DL CINR report with REP-RSP MAC message
496 6.3.17.2 Periodic CINR report with fast-feedback (CQICH) channel
498 6.3.17.2.1 Conditions of transition triggering
6.3.18 Optional band AMC operations using 6-bit CQICH encoding
6.3.18.1 Call flows for mode transitions between normal subchannel and band AMC
499 6.3.18.2 Conditions of transition triggering
6.3.19 Data delivery services for mobile network
500 6.3.19.1 Types of data delivery services
6.3.19.1.1 Unsolicited grant service (UGS)
501 6.3.19.1.2 Real-time variable-rate (RT-VR) service
6.3.19.1.2.1 Description of the service
6.3.19.1.3 Non-real-time variable-rate (NRT-VR) service
502 6.3.19.1.3.1 Description of the service
6.3.19.1.4 Best effort (BE) service
6.3.19.1.5 Extended real-time variable-rate (ERT-VR) service
503 6.3.20 Sleep mode for mobility-supporting MS
6.3.20.1 Introduction
506 6.3.20.2 Power saving classes of type I
507 6.3.20.3 Power saving classes of type II
508 6.3.20.4 Power saving classes of type III
509 6.3.20.5 Periodic ranging in sleep mode
6.3.20.5.1 Periodic ranging in sleep mode for PHYs (SC and OFDM)
510 6.3.20.5.2 Periodic ranging in sleep mode for OFDMA PHY
6.3.20.6 MDHO/FBSS diversity set maintenance in sleep mode
6.3.20.7 Keep-alive check in sleep mode
6.3.20.7.1 OFDMA message-based keep-alive check in sleep mode
511 6.3.20.7.2 OFDMA keep alive check by UL data grants in sleep mode
6.3.20.8 Sleep mode supporting co-located coexistence
512 6.3.20.9 MAP relevance for Sleep Mode
513 6.3.21 MAC HO procedures
6.3.21.1 Network topology acquisition
6.3.21.1.1 Network topology advertisement
514 6.3.21.1.2 MS scanning of neighbor BSs
515 6.3.21.1.3 Association procedure
516 6.3.21.1.3.1 Association level 0ā€”Scan/Association without coordination
6.3.21.1.3.2 Association level 1ā€”Association with coordination
517 6.3.21.1.3.3 Association level 2ā€”Network-assisted association reporting
518 6.3.21.2 HO process
520 6.3.21.2.1 Cell reselection
521 6.3.21.2.2 HO decision and initiation
524 6.3.21.2.3 HO cancellation
6.3.21.2.4 Fast ranging
525 6.3.21.2.5 Termination with the serving BS
6.3.21.2.6 Drops during HO
526 6.3.21.2.7 Network entry/reentry
528 6.3.21.2.8 MS-assisted coordination of DL transmission at target BS for HO
529 6.3.21.2.8.1 Context management during optimized HO
6.3.21.2.8.1.1 BS PHY settings
6.3.21.2.8.1.2 BS Channel descriptor settings
6.3.21.2.8.1.3 Ranging settings
530 6.3.21.2.8.1.4 Basic capabilities settings:
6.3.21.2.8.1.5 Registration settings
6.3.21.2.8.1.6 Service flows settings
6.3.21.2.8.1.6.1 Service flowsā€”static context
6.3.21.2.8.1.6.2 Service flowsā€”dynamic context, non-ARQ enabled connections
531 6.3.21.2.8.1.6.3 Service flowsā€”dynamic context, ARQ enabled connections
532 6.3.21.2.8.1.6.4 Service flows – dynamic context, HARQ enabled connections
6.3.21.2.8.1.6.5 Outstanding bandwidth requests
6.3.21.2.8.1.6.6 Security settings
533 6.3.21.2.8.1.6.7 Power Saving Class settings
6.3.21.2.8.1.7 Scanningā€”dynamic and static context
534 6.3.21.2.9 HO process
537 6.3.21.2.10 HO optimization rules and scenarios
539 6.3.21.2.11 Seamless HO
541 6.3.21.3 Macro diversity handover (MDHO) and fast BS switching
6.3.21.3.1 MDHO decision and initiation
543 6.3.21.3.2 FBSS decision and initiation
544 6.3.21.3.3 Diversity set update for MDHO/FBSS
6.3.21.3.4 Anchor BS update for MDHO/FBSS
6.3.21.3.4.1 HO MAC management message method
545 6.3.21.3.4.2 Fast anchor BS selection feedback mechanism
547 6.3.21.3.5 MS-assisted coordination of DL transmission at new anchor BS
6.3.22 Multicast and broadcast service (MBS)
549 6.3.22.1 Establishment and maintenance of MBSs
550 6.3.22.1.1 Inter-MBS Zone transition
6.3.22.2 Performance enhancement with macro diversity
6.3.22.3 Power saving operation
6.3.22.4 Multicast and broadcast zone (MBS_Zone)
551 6.3.23 MS idle mode (optional)
552 6.3.23.1 MS idle mode initiation
553 6.3.23.2 Cell selection
554 6.3.23.3 MS Broadcast Paging message time synchronization
6.3.23.4 MS paging unavailable interval
6.3.23.5 MS paging listening interval
6.3.23.6 BS Broadcast Paging message
555 6.3.23.7 Paging availability mode termination
6.3.23.7.1 MS side
556 6.3.23.7.2 BS side
6.3.23.8 Location update
6.3.23.8.1 Location update conditions
557 6.3.23.8.1.1 Paging group update
6.3.23.8.1.2 Timer update
6.3.23.8.1.3 Power down update
6.3.23.8.1.4 MAC hash skip threshold update
6.3.23.8.1.5 MBS update
6.3.23.8.2 Location update process
558 6.3.23.8.2.1 Secure location update process
6.3.23.8.2.2 Unsecure location update process
6.3.23.9 Network reentry from idle mode
559 6.3.24 MIHF support
560 6.3.25 Location Based Services
6.3.25.1 Time Difference of Arrival (TDOA)
561 6.3.26 Persistent Scheduling
6.3.26.1 Persistent Region ID
6.3.26.1.1 Downlink operation
6.3.26.1.1.1 BS operation
6.3.26.1.1.2 MS operation
6.3.26.1.2 Uplink operation
6.3.26.1.2.1 BS operation
562 6.3.26.1.2.2 MS operation
6.3.26.2 Resource shifting
563 6.3.26.3 HARQ retransmission
6.3.26.4 Error handling procedures
6.3.26.4.1 Maximum Number of Persistent Allocations
564 6.3.26.4.2 MAP ACK channel
6.3.26.4.3 MAP NACK channel
6.3.26.4.3.1 Downlink operation
565 6.3.26.4.3.2 Uplink operation
6.3.26.4.4 Error Correction Information
6.3.26.4.5 Change indicator
6.3.26.4.6 Retransmission flag
566 6.3.26.4.7 Error recovery
6.3.26.4.7.1 Downlink persistent allocation error recovery
6.3.26.4.7.2 Uplink persistent allocation error recovery
567 6.3.27 Emergency Service
569 7. Security sublayer
7.1 Architecture
570 7.1.1 Secure encapsulation of MAC PDUs
7.1.2 Key management protocol
571 7.1.3 Authentication protocol
7.1.3.1 PKM RSA authentication
7.1.3.2 PKM EAP authentication
7.1.4 Mapping of connections to SAs
572 7.1.5 Cryptographic suite
7.2 PKM protocol
7.2.1 PKM version 1
7.2.1.1 Security associations (SAs)
573 7.2.1.2 SS authorization and AK exchange overview
7.2.1.2.1 Authorization via RSA authentication protocol
574 7.2.1.3 TEK exchange overview
7.2.1.3.1 TEK exchange overview for PMP topology
575 7.2.1.4 Security capabilities selection
7.2.1.5 Authorization state machine
576 7.2.1.5.1 States
577 7.2.1.5.2 Messages
578 7.2.1.5.3 Events
579 7.2.1.5.4 Parameters
7.2.1.5.5 Actions
581 7.2.1.6 TEK state machine
7.2.1.6.1 States
582 7.2.1.6.2 Messages
583 7.2.1.6.3 Events
584 7.2.1.6.4 Parameters
7.2.1.6.5 Actions
586 7.2.2 PKM Version 2
7.2.2.1 TEK exchange overview for PMP topology
587 7.2.2.2 Key derivation
588 7.2.2.2.1 RSA-based authorization
7.2.2.2.2 EAP authentication
7.2.2.2.3 AK derivation
589 7.2.2.2.4 KEK derivation
7.2.2.2.5 GKEK derivation
7.2.2.2.6 Traffic encryption key (TEK)
7.2.2.2.6.1 Counter-based TEK Generation for HO
590 7.2.2.2.7 Group traffic encryption key (GTEK)
7.2.2.2.8 MBS traffic key (MTK)
591 7.2.2.2.9 Message authentication keys (HMAC/CMAC) and KEK derivation
7.2.2.2.9.1 CMAC_KEY_COUNT_ management
7.2.2.2.9.1.1 Maintenance of CMAC_KEY_COUNTM by the MS
7.2.2.2.9.1.1.1 CMAC_KEY_LOCK state
592 7.2.2.2.9.1.2 Processing of CMAC_KEY_COUNTB by the BS
7.2.2.2.9.2 Derivation of message authentication codes
594 7.2.2.2.10 Key hierarchy
597 7.2.2.2.11 Maintenance of PMK and AK
7.2.2.2.12 PKMv2 PMK and AK switching methods
7.2.2.3 Associations
598 7.2.2.3.1 Security associations (SAs)
7.2.2.3.2 Group security associations (GSAs)
7.2.2.3.3 Multicast and broadcast service group security associations (MBSGSAs)
7.2.2.4 Security context
599 7.2.2.4.1 AK context
600 7.2.2.4.2 GKEK context
7.2.2.4.3 PMK context
601 7.2.2.4.4 PAK context
7.2.2.5 Authentication state machine
604 7.2.2.5.1 States
605 7.2.2.5.2 Messages
606 7.2.2.5.3 Events
607 7.2.2.5.4 Parameters
7.2.2.5.5 Actions
609 7.2.2.6 TEK state machine
611 7.2.2.6.1 States
612 7.2.2.6.2 Messages
7.2.2.6.3 Events
613 7.2.2.6.4 Parameters
7.2.2.6.5 Actions
616 7.3 Dynamic SA creation and mapping
7.3.1 Dynamic SA creation
7.3.2 Dynamic mapping of SA
7.4 Key usage
7.4.1 BS key usage
7.4.1.1 AK key lifetime
7.4.1.2 AK transition period on BS side
617 7.4.1.3 BS usage of AK
619 7.4.1.4 TEK lifetime
7.4.1.5 BS usage of TEK
620 7.4.2 SS key usage
621 7.4.2.1 SS reauthorization
7.4.2.2 SS usage of AK
7.4.2.3 SS usage of TEK
622 7.5 Cryptographic methods
7.5.1 Data Encryption methods
7.5.1.1 Data encryption with DES in CBC mode
623 7.5.1.2 Data encryption with AES in CCM mode
7.5.1.2.1 PDU payload format
7.5.1.2.2 Packet number (PN)
624 7.5.1.2.3 CCM algorithm
625 7.5.1.2.4 Receive processing rules
7.5.1.2.5 AES-CCM mode example encrypted MAC PDUs
626 7.5.1.3 Data encryption with AES in CTR mode
7.5.1.3.1 Encrypted MBS PDU payload format
627 7.5.1.4 Data encryption with AES in CBC mode
628 7.5.1.4.1 CBC IV generation
629 7.5.2 Encryption of TEK
7.5.2.1 Encryption of TEK with 3-DES
630 7.5.2.2 Encryption of TEK with RSA
7.5.2.3 Encryption of TEK-128 with AES
7.5.2.4 Encryption of TEK-128 with AES key wrap
631 7.5.3 Calculation of HMAC-Digests
7.5.4 Derivation of TEKs, KEKs, and message authentication keys
7.5.4.1 DES keys
7.5.4.2 Key encryption keys (KEKs)
632 7.5.4.3 HMAC authentication keys
7.5.4.4 Cipher-based message authentication code (CMAC)
7.5.4.4.1 Calculation of CMAC value
633 7.5.4.5 Derivation of TEKs, KEKs, message authentication keys and GKEKs in PKMv2
7.5.4.5.1 AES KEKs in PKMv2
634 7.5.4.5.2 Encryption of GKEK in PKMv2
7.5.4.5.2.1 Encryption of GKEK with 3-DES in PKMv2
7.5.4.5.2.2 Encryption of GKEK with RSA in PKMv2
7.5.4.5.2.3 Encryption of GKEK with ECB mode AES in PKMv2
7.5.4.5.2.4 Encryption of GKEK with AES key wrap in PKMv2
635 7.5.4.6 Key derivation functions for PKMv2
7.5.4.6.1 Dot16KDF for PKMv2
636 7.5.5 Public-key encryption of AK
7.5.6 Digital signatures
7.6 Certificate profile
7.6.1 Certificate format
637 7.6.1.1 tbsCertificate.validity.notBefore and tbsCertificate.validity.notAfter
7.6.1.2 tbsCertificate.serialNumber
7.6.1.3 tbsCertificate.signature and signatureAlgorithm
7.6.1.4 tbsCertificate.issuer and tbsCertificate.subject
638 7.6.1.4.1 Manufacturer certificate
7.6.1.4.2 SS certificate
639 7.6.1.4.3 BS certificate
7.6.1.5 tbsCertificate.subjectPublicKeyInfo
7.6.1.6 tbsCertificate.issuerUniqueID and tbsCertificate.subjectUniqueID
7.6.1.7 tbsCertificate.extensions
7.6.1.7.1 SS certificates
640 7.6.1.7.2 Manufacturer certificates
7.6.1.8 signatureValue
7.6.2 SS certificate storage and management in the SS
7.6.3 Certificate processing and management in the BS
7.7 Preauthentication
7.8 PKMv2
7.8.1 PKMv2 SA-TEK 3-way handshake
642 7.8.2 BS and SS RSA mutual authentication and AK exchange overview
644 7.8.3 Multicast and broadcast service (MBS) support
7.8.3.1 MBS security associations
7.8.3.2 MBS key management
7.8.3.2.1 MAK establishment
7.8.3.2.2 MGTEK establishment
7.8.3.2.3 MTK establishment
7.9 Multicast and broadcast rekeying algorithm (MBRA)
645 7.9.1 MBRA flow
647 7.9.1.1 BS usage of GTEK
7.9.1.2 SS usage of GTEK
7.9.2 Messages
648 7.9.3 Encryption of GKEK
7.9.4 Message authentication keys for the Key Update Command message
649 8. Physical layer (PHY)
8.1 WirelessMAN-SC PHY specification
8.1.1 Overview
8.1.2 Framing
650 8.1.2.1 Supported frame durations
8.1.3 Duplexing techniques and PHY Type parameter encodings
8.1.3.1 FDD operation
651 8.1.3.2 TDD operation
8.1.3.2.1 TTG
652 8.1.3.2.2 RTG
8.1.4 DL PHY
8.1.4.1 DL subframe
653 8.1.4.1.1 DL burst preambles
654 8.1.4.1.2 Frame control section
655 8.1.4.1.2.1 DL-MAP elements
8.1.4.1.2.2 DL-MAP PHY synchronization field definition
656 8.1.4.1.2.3 UL-MAP allocation start time definition
8.1.4.1.2.4 Required DCD parameters
8.1.4.1.2.5 Downlink_Burst_Profile
658 8.1.4.2 DL burst allocation
659 8.1.4.3 DL TCS
660 8.1.4.4 DL PMD sublayer
661 8.1.4.4.1 Burst profile definitions
8.1.4.4.2 DL PHY SS capability set parameters
662 8.1.4.4.3 Randomization
8.1.4.4.4 DL FEC
663 8.1.4.4.4.1 Outer code for Code Types 1ā€“3, DL
664 8.1.4.4.4.2 Inner code for Code Type 2, DL
665 8.1.4.4.4.3 Inner code for Code Type 3, DL
8.1.4.4.4.4 Code Type 4, DL
670 8.1.4.4.5 Definition of parameters for burst profile (DIUC = 0)
8.1.4.4.6 Coding of the control portion of the frame
8.1.4.4.7 DL modulation
675 8.1.4.4.8 Baseband pulse shaping
8.1.4.4.9 Transmitted waveform
676 8.1.5 UL PHY
8.1.5.1 UL subframe
677 8.1.5.1.1 UL burst preamble
678 8.1.5.1.2 UL-MAP IE definition
679 8.1.5.1.2.1 UL-MAP Extended IE format
8.1.5.1.2.2 UL-MAP Power Control IE format
680 8.1.5.1.3 Required UCD parameters
8.1.5.1.4 UL channel
8.1.5.1.5 Uplink_Burst_Profile
681 8.1.5.2 UL TCS
8.1.5.3 UL PMD sublayer
8.1.5.3.1 Randomization for spectrum shaping
682 8.1.5.3.2 UL FEC
8.1.5.3.2.1 Outer code for Code Types 1ā€“3, UL
683 8.1.5.3.2.2 Inner code for Code Type 2, UL
8.1.5.3.2.3 Inner code for Code Type 3, UL
8.1.5.3.2.4 Code Type 4, UL
684 8.1.5.3.3 Shortening of FEC blocks in UL
8.1.5.3.4 Number of scheduled UL bursts per frame
8.1.5.3.5 Coding of the Request IE Uplink_Burst_Profile
8.1.5.3.6 Coding of the initial ranging Uplink_Burst_Profile
8.1.5.3.7 UL modulation
8.1.5.3.8 Baseband pulse shaping
8.1.5.3.9 Transmitted waveform
8.1.6 Baud rates and channel bandwidths
685 8.1.7 Radio subsystem control
8.1.7.1 Synchronization technique
8.1.7.2 Frequency control
8.1.7.3 Power control
686 8.1.8 Minimum performance
688 8.1.8.1 Propagation conditions
8.1.8.1.1 Propagation models
689 8.1.8.1.2 Rain fades
690 8.1.8.2 Transmitter characteristics
8.1.8.2.1 Output power
8.1.8.2.1.1 BS
8.1.8.2.1.2 SS
8.1.8.2.2 Emission mask and adjacent channel performance (NFD)
691 8.1.8.2.3 Modulation accuracy and error vector magnitude (EVM)
692 8.1.9 Channel quality measurements
8.1.9.1 Introduction
693 8.1.9.2 RSSI mean and standard deviation
694 8.1.9.3 CINR mean and standard deviation
695 8.2 Reserved
8.3 WirelessMAN-OFDM PHY
8.3.1 Introduction
8.3.1.1 OFDM symbol description
8.3.1.1.1 Time domain
696 8.3.1.1.2 Frequency domain
697 8.3.2 OFDM symbol parameters and transmitted signal
8.3.2.1 Primitive parameter definitions
8.3.2.2 Derived parameter definitions
8.3.2.3 Transmitted signal
8.3.2.4 Parameters of transmitted signal
8.3.3 Channel coding
699 8.3.3.1 Randomization
700 8.3.3.2 FEC
8.3.3.2.1 Concatenated Reed-Solomon-convolutional code (RS-CC)
702 8.3.3.2.2 Block turbo coding (BTC) (optional)
705 8.3.3.2.3 Convolutional turbo codes (CTC) (optional)
8.3.3.2.3.1 CTC encoder
706 8.3.3.2.3.2 CTC interleaver
707 8.3.3.2.3.3 Determination of CTC circulation states
8.3.3.2.3.4 CTC puncturing
8.3.3.3 Interleaving
708 8.3.3.4 Modulation
8.3.3.4.1 Data modulation
710 8.3.3.4.2 Pilot modulation
8.3.3.4.3 Rate ID encodings
8.3.3.5 Example OFDM UL RS-CC encoding
711 8.3.3.5.1 Full bandwidth (16 subchannels)
712 8.3.3.5.2 Subchannelization (2 subchannels)
713 8.3.3.5.3 Subchannelization (1 subchannel)
8.3.3.6 Preamble structure and modulation
716 8.3.4 Transmission convergence sublayer (TCS)
8.3.5 Frame structure
8.3.5.1 PMP
721 8.3.5.1.1 PMP DL subchannelization zone
723 8.3.5.2 PMP-AAS Zone
728 8.3.5.3 Frame duration codes
8.3.5.4 Burst profile format
729 8.3.6 Map message fields and IEs
8.3.6.1 DL-MAP PHY synchronization field
8.3.6.2 DL-MAP IE format
730 8.3.6.2.1 DIUC allocations
731 8.3.6.2.2 DL-MAP Extended IE format
8.3.6.2.3 Channel Measurement IE format
8.3.6.2.4 DL-MAP AAS IE format
732 8.3.6.2.5 DL-MAP STC IE format
8.3.6.2.6 DL-MAP Concurrent Transmission IE format
733 8.3.6.2.7 DL-MAP Physical Modifier IE format
734 8.3.6.2.8 DL-MAP Dummy IE format
8.3.6.2.9 DL SUBCH IE format
8.3.6.3 UL-MAP IE format
736 8.3.6.3.1 UIUC allocations
8.3.6.3.2 UL-MAP Focused Contention IE format
737 8.3.6.3.3 Subchannelized Network Entry IE
8.3.6.3.4 UL-MAP Extended IE format
738 8.3.6.3.5 UL-MAP Power Control IE format
8.3.6.3.6 UL-MAP AAS IE format
739 8.3.6.3.7 UL-MAP Physical Modifier IE
740 8.3.6.3.8 UL-MAP Dummy IE format
8.3.6.3.9 Fast Ranging IE
741 8.3.6.3.10 UL-MAP Fast Tracking IE
8.3.6.4 AAS-FBCK-REQ/RSP message bodies
743 8.3.6.5 AAS-BEAM-REQ/RSP message
746 8.3.6.6 Compressed private maps
8.3.6.6.1 Compressed private DL-MAP
748 8.3.6.6.2 Compressed Private UL-MAP
8.3.6.7 Reduced private maps
749 8.3.6.7.1 Reduced private DL-MAP
751 8.3.6.7.2 Reduced private UL-MAP
752 8.3.7 Control mechanisms
8.3.7.1 Synchronization
8.3.7.1.1 Network synchronization
8.3.7.2 Ranging
753 8.3.7.2.1 Initial ranging in AAS systems
755 8.3.7.3 Bandwidth requesting
757 8.3.7.3.1 Parameter selection
8.3.7.3.2 Full Contention transmission
759 8.3.7.3.3 Focused Contention transmission
760 8.3.7.4 Power control
8.3.7.4.1 Closed-loop power control mode
761 8.3.7.4.2 Open loop power control mode (optional)
763 8.3.8 Tx diversity: space-time coding (STC) (optional)
8.3.8.1 Multiple input single output channel estimation and synchronization
8.3.8.2 STC encoding
764 8.3.8.3 STC decoding
765 8.3.9 Channel quality measurements
8.3.9.1 Introduction
8.3.9.2 RSSI mean and standard deviation
766 8.3.9.3 CINR mean and standard deviation
767 8.3.10 Transmitter requirements
8.3.10.1 Tx power level control
8.3.10.2 Transmitter spectral flatness
768 8.3.10.3 Transmitter constellation error and test method
769 8.3.10.4 Transmitter channel bandwidth and RF carrier frequencies
8.3.11 Receiver requirements
770 8.3.11.1 Receiver sensitivity
771 8.3.11.2 Receiver adjacent and alternate channel rejection
8.3.11.3 Receiver maximum input signal
8.3.11.4 Receiver maximum tolerable signal
772 8.3.11.5 Receiver image rejection
8.3.12 Frequency and timing requirements
8.4 WirelessMAN-OFDMA PHY
8.4.1 Introduction
8.4.2 OFDMA symbol description, symbol parameters and transmitted signal
8.4.2.1 Time domain description
773 8.4.2.2 Frequency domain description
774 8.4.2.3 Primitive parameters
8.4.2.4 Derived parameters
8.4.2.5 Transmitted signal
775 8.4.3 OFDMA basic terms definition
8.4.3.1 Slot and data region
8.4.3.2 Segment
8.4.3.3 Permutation zone
8.4.3.4 OFDMA data mapping
778 8.4.4 Frame structure
8.4.4.1 TDD frame structure
779 8.4.4.2 FDD frame structure
782 8.4.4.2.1 Group Switching
783 8.4.4.2.2 Frame partition signaling
784 8.4.4.2.3 Full Duplex Support
8.4.4.2.3.1 Full Duplex Support with FDD paired allocation IE
8.4.4.2.3.2 Full Duplex Support with aggregated HARQ channels
785 8.4.4.2.4 DCD
8.4.4.2.5 UCD
8.4.4.3 OFDMA Frame Parameters and Operations
787 8.4.4.4 DL frame prefix
789 8.4.4.5 Allocation of subchannels for FCH and DL-MAP and logical subchannel numbering
792 8.4.4.6 UL transmission allocations
794 8.4.4.7 Optional AAS support
8.4.4.7.1 AAS frame structure
795 8.4.4.7.2 Optional Diversity-Map scan
796 8.4.4.7.3 AAS diversity scan map network entry procedure
8.4.4.7.4 AAS preambles
799 8.4.4.7.4.1 AAS DL preamble
800 8.4.4.7.4.2 AAS UL preamble
801 8.4.5 Map message fields and IEs
8.4.5.1 DL-MAP PHY Synchronization field
802 8.4.5.2 Frame duration codes
8.4.5.3 DL-MAP IE format
804 8.4.5.3.1 DIUC allocation
805 8.4.5.3.2 DL-MAP Extended IE format
8.4.5.3.2.1 DL-MAP Extended IE encoding format
806 8.4.5.3.2.2 DL-MAP Extended-2 IE encoding format
807 8.4.5.3.2.3 DL-MAP Extended-3 IE encoding format
8.4.5.3.3 AAS DL IE format
809 8.4.5.3.4 STC DL Zone IE format
812 8.4.5.3.5 Channel Measurement IE
8.4.5.3.6 Data Location In Another BS IE
813 8.4.5.3.7 CID Switch IE
814 8.4.5.3.8 MIMO DL Basic IE format
817 8.4.5.3.9 MIMO DL Enhanced IE format
819 8.4.5.3.10 HARQ and Sub-MAP Pointer IE
821 8.4.5.3.11 DL-MAP Physical Modifier IE
822 8.4.5.3.12 MBS MAP IE
825 8.4.5.3.13 DL PUSC Burst Allocation in Other Segment IE
826 8.4.5.3.14 HO Anchor Active DL MAP IE
827 8.4.5.3.15 HO Active Anchor DL MAP IE
828 8.4.5.3.16 HO CID Translation MAP IE
8.4.5.3.17 MIMO in Another BS IE
830 8.4.5.3.18 Macro-MIMO DL Basic IE format
831 8.4.5.3.19 UL Noise and Interference Level IE format
834 8.4.5.3.20 Dedicated DL Control IE
8.4.5.3.20.1 Reduced CID IE
836 8.4.5.3.20.2 Skip IE
837 8.4.5.3.21 HARQ DL MAP IE
853 8.4.5.3.21.1 Dedicated MIMO DL Control IE format
855 8.4.5.3.22 DL HARQ ACK IE
856 8.4.5.3.23 Enhanced DL MAP IE
857 8.4.5.3.24 Closed-loop MIMO DL enhanced IE format
859 8.4.5.3.25 Broadcast Control Pointer IE
860 8.4.5.3.26 AAS SDMA DL IE format
863 8.4.5.3.27 PUSC ASCA Allocation IE
864 8.4.5.3.28 H-FDD Group Switch IE
865 8.4.5.3.29 Persistent HARQ DL MAP Allocation IE
898 8.4.5.3.30 Power Boosting IE
899 8.4.5.3.31 Extended Broadcast Control Pointer IE
900 8.4.5.4 UL-MAP IE format
903 8.4.5.4.1 UIUC allocation
904 8.4.5.4.2 PAPR Reduction/Safety Zone/Sounding Zone Allocation IE
8.4.5.4.3 CDMA Allocation UL-MAP IE format
905 8.4.5.4.4 UL-MAP Extended IE
8.4.5.4.4.1 UL-MAP Extended IE format
906 8.4.5.4.4.2 UL-MAP Extended-2 IE format
907 8.4.5.4.4.3 UL-MAP Extended-3 IE format
908 8.4.5.4.5 Power Control IE format
909 8.4.5.4.6 AAS UL IE format
910 8.4.5.4.7 UL Zone Switch IE format
912 8.4.5.4.8 Mini-Subchannel Allocation IE
913 8.4.5.4.9 Fast-Feedback Allocation IE
914 8.4.5.4.10 MIMO UL Basic IE format
916 8.4.5.4.11 CQICH Allocation IE Format
920 8.4.5.4.12 UL-MAP Physical Modifier IE
921 8.4.5.4.13 UL Allocation Start IE
922 8.4.5.4.14 CQICH Enhanced Allocation IE format
925 8.4.5.4.15 UL PUSC Burst Allocation in Other Segment IE
926 8.4.5.4.16 HO Anchor Active UL-MAP IE
927 8.4.5.4.17 HO Active Anchor UL MAP IE
8.4.5.4.18 MIMO UL Enhanced IE format
928 8.4.5.4.19 OFDMA Fast Ranging IE format
929 8.4.5.4.20 UL-MAP Fast Tracking IE
931 8.4.5.4.21 Anchor BS Switch IE
933 8.4.5.4.22 HARQ UL-MAP IE
944 8.4.5.4.22.1 Dedicated UL Control IE
945 8.4.5.4.22.2 Dedicated MIMO UL Control IE format
8.4.5.4.23 HARQ ACK Region Allocation IE
946 8.4.5.4.24 UL Sounding Command IE
8.4.5.4.25 AAS SDMA UL IE format
949 8.4.5.4.26 Feedback Polling IE
951 8.4.5.4.27 Uplink Power Control Bitmap IE
952 8.4.5.4.28 Persistent HARQ UL MAP Allocation IE
979 8.4.5.4.29 FDD Paired Allocation IE
980 8.4.5.5 Burst profile format
982 8.4.5.6 Compressed maps
983 8.4.5.6.1 Compressed DL-MAP
985 8.4.5.6.2 Compressed UL-MAP
8.4.5.7 AAS-FBCK-REQ/RSP message bodies
987 8.4.5.8 Optional reduced AAS private maps
988 8.4.5.9 Reduced AAS private maps
8.4.5.9.1 Reduced AAS private DL-MAP
992 8.4.5.9.2 Reduced AAS private UL-MAP
994 8.4.6 OFDMA subcarrier allocations
8.4.6.1 Downlink (DL)
995 8.4.6.1.1 Preamble
1015 8.4.6.1.1.1 Common SYNC symbol (optional)
8.4.6.1.1.2 Common SYNC symbol sequence
1016 8.4.6.1.2 Symbol structure
8.4.6.1.2.1 Symbol structure for PUSC
1019 8.4.6.1.2.1.1 DL subchannels subcarrier allocation in PUSC
1020 8.4.6.1.2.2 Symbol structure for FUSC
1024 8.4.6.1.2.2.1 DL subchannels subcarrier allocation
8.4.6.1.2.2.2 Partitioning of data subcarriers into subchannels in DL FUSC
1025 8.4.6.1.2.3 Additional optional symbol structure for FUSC
8.4.6.1.2.3.1 DL subchannels subcarrier allocation
1028 8.4.6.1.2.4 Optional DL tile usage of subchannelsā€”TUSC1
8.4.6.1.2.4.1 Symbol structure for TUSC1 subchannels
8.4.6.1.2.4.2 Partitioning of subcarriers into TUSC1 subchannels
8.4.6.1.2.5 Optional DL tile usage of subchannelsā€”TUSC2
1029 8.4.6.1.2.5.1 Symbol structure for TUSC2 subchannels
8.4.6.1.2.5.2 Partitioning of subcarriers into TUSC2 subchannels
8.4.6.1.2.6 TUSC1/TUSC2 support for SDMA
8.4.6.2 Uplink (UL)
1031 8.4.6.2.1 Symbol structure for subchannel (PUSC)
8.4.6.2.2 Partitioning of subcarriers into subchannels in the UL
1032 8.4.6.2.3 UL permutation example
1033 8.4.6.2.4 Partition a slot to mini-subchannels
1034 8.4.6.2.5 Additional optional symbol structure for PUSC
1036 8.4.6.2.5.1 Symbol structure for subchannel
8.4.6.2.5.2 Partitioning of subcarriers into subchannels in the UL
1037 8.4.6.2.6 Data subchannel rotation scheme
1038 8.4.6.2.7 Optional UL channel sounding in TDD systems
8.4.6.2.7.1 Channel sounding
1046 8.4.6.2.7.2 Power assignment
8.4.6.2.7.3 Direct transmission of DL channel coefficients
1048 8.4.6.2.7.4 Feedback of received pilot coefficients
1049 8.4.6.3 Optional adjacent subcarrier permutations for AMC
1051 8.4.6.3.1 AMC optional permutation
1053 8.4.6.3.2 Band-AMC operation in normal DL/UL-MAP
8.4.6.3.3 AMC support for SDMA
1054 8.4.6.4 Optional permutations for PUSC
8.4.6.4.1 Optional permutation for PUSC adjacent subcarrier allocation (PUSC-ASCA)
8.4.6.4.1.1 Allocation using adjacent clusters
1055 8.4.6.4.1.1.1 Allocation of subcarriers to subchannels
1056 8.4.6.4.1.2 Allocation using distributed clusters
8.4.6.4.1.2.1 Allocation of subcarriers to subchannels
8.4.7 OFDMA ranging
1057 8.4.7.1 Initial ranging and HO ranging transmissions
1058 8.4.7.2 Periodic ranging and BR transmissions
1059 8.4.7.3 Ranging codes
1060 8.4.7.4 Ranging and BR opportunity size
1061 8.4.8 Space-time coding (STC) (optional)
8.4.8.1 STC using two antennas
1062 8.4.8.1.1 Multiple-input, single-output channel estimation and synchronization
8.4.8.1.2 STC using two antennas
8.4.8.1.2.1 STC encoding
1063 8.4.8.1.2.1.1 STC using 2 antennas in PUSC
1064 8.4.8.1.2.1.2 STC using two antennas in FUSC
1065 8.4.8.1.2.1.3 STC data mapping
8.4.8.1.2.2 STC decoding
8.4.8.1.3 Frequency hopping diversity coding (FHDC)
1066 8.4.8.1.4 STC/FHDC configurations
8.4.8.1.5 UL using STC
1068 8.4.8.1.6 STC of two antennas using directivity through four antennas
8.4.8.2 STC for four antennas
1069 8.4.8.2.1 STC for four antennas using PUSC
8.4.8.2.2 STC for four antennas using FUSC
8.4.8.2.3 STC configurations
1071 8.4.8.2.4 MIMO MDHO-based macro-diversity transmission
8.4.8.3 STC for the optional zones in the DL
1074 8.4.8.3.1 Symbol structure for optional AMC and optional FUSC
8.4.8.3.1.1 Allocation of pilot subcarriers
1076 8.4.8.3.1.2 Allocation of data subchannels
8.4.8.3.1.2.1 STC Mapping for optional AMC permutation
1078 8.4.8.3.1.2.2 STC Mapping for optional FUSC permutation
1080 8.4.8.3.1.2.3 Burst packing of spatial multiplexed streams with CTC HARQ
8.4.8.3.2 Symbol structure for the optional PUSC-ASCA
8.4.8.3.3 Transmission schemes for 2-antenna BS in DL
8.4.8.3.4 Transmission schemes for 3-antenna BS in DL
1082 8.4.8.3.4.1 Enhanced 3-Tx Matrix A with Antenna Grouping
8.4.8.3.4.2 Enhanced 3-Tx Matrix B with antenna grouping
1083 8.4.8.3.4.3 3-Tx Matrix C with antenna selection
1084 8.4.8.3.5 Transmission schemes for 4-antenna BS
1085 8.4.8.3.5.1 Enhanced 4-Tx Matrix A with antenna grouping
1086 8.4.8.3.5.2 Enhanced 4-Tx Matrix B with antenna grouping
1088 8.4.8.3.5.3 4-Tx Matrix C with antenna selection
8.4.8.3.6 MIMO precoding
1089 8.4.8.4 STC for the optional zones in the UL
1090 8.4.8.4.1 Allocation of pilot subcarriers
1091 8.4.8.4.2 Allocation of data subchannels
1092 8.4.8.4.3 Transmission schemes for 2-antenna MS in UL
8.4.8.5 MIMO midamble
1093 8.4.8.5.1 Midamble sequence
1094 8.4.8.5.1.1 PAPR reduction sequence for BS with two antennas
1100 8.4.8.5.1.2 PAPR reduction sequence for BS with three or four antennas
1105 8.4.8.6 STC subpacket combining
1106 8.4.8.7 Cyclic delay diversity (CDD)
1107 8.4.9 Channel coding
8.4.9.1 Randomization
1108 8.4.9.2 Encoding
1109 8.4.9.2.1 Convolutional coding (CC)
1110 8.4.9.2.1.1 Incremental redundancy HARQ support (optional)
1112 8.4.9.2.2 Block turbo coding (BTC) (optional)
1113 8.4.9.2.3 Convolutional turbo codes (CTCs) (optional)
8.4.9.2.3.1 CTC encoder
1117 8.4.9.2.3.2 CTC interleaver
1118 8.4.9.2.3.3 Determination of CTC circulation states
8.4.9.2.3.4 Subpacket generation
1119 8.4.9.2.3.4.1 Bit separation
1120 8.4.9.2.3.4.2 Subblock interleaving
8.4.9.2.3.4.3 Bit grouping
1122 8.4.9.2.3.4.4 Bit selection
8.4.9.2.3.5 Optional IR HARQ support
1123 8.4.9.2.3.5.1 Padding
8.4.9.2.3.5.2 CRC encoding
8.4.9.2.3.5.3 Fragmentation
8.4.9.2.3.5.4 Randomization
1124 8.4.9.2.3.5.5 CTC encoding and subpacket generation
8.4.9.2.3.5.6 Modulation order of DL traffic burst
1129 8.4.9.2.3.5.7 Modulation order of UL traffic burst
1134 8.4.9.2.4 Zero tailed convolutional coding (optional)
1135 8.4.9.2.5 Low density parity check (LDPC) code (optional)
8.4.9.2.5.1 Code description
1138 8.4.9.2.5.2 Code rate and block size adjustment
8.4.9.2.5.3 Packet encoding
1139 8.4.9.3 Interleaving
1140 8.4.9.3.1 Optional interleaver for convolutional coding
8.4.9.4 Modulation
8.4.9.4.1 Subcarrier randomization
1141 8.4.9.4.2 Data modulation
1142 8.4.9.4.3 Pilot modulation
1143 8.4.9.4.3.1 Preamble pilot modulation
8.4.9.4.3.2 Ranging pilot modulation
8.4.9.4.4 Example of OFDMA UL CC encoding
1145 8.4.9.5 Repetition
8.4.9.6 Zone boosting
1146 8.4.9.7 Multiple HARQ (optional)
8.4.9.7.1 Generic chase HARQ
1147 8.4.9.7.2 CC-IR HARQ
8.4.10 Control mechanisms
8.4.10.1 Synchronization
8.4.10.1.1 Network synchronization
8.4.10.1.2 SS synchronization
8.4.10.2 Ranging
1148 8.4.10.3 Power control
1150 8.4.10.3.1 Closed-loop power control
8.4.10.3.2 Optional open-loop power control
1152 8.4.10.3.2.1 UL Tx power and Headroom transmission condition
1153 8.4.10.3.2.2 Power control in handoff
1154 8.4.11 Fast-feedback channels
1156 8.4.11.1 Fast DL measurement feedback
1160 8.4.11.2 Fast MIMO feedback
1161 8.4.11.3 Mode selection feedback
1162 8.4.11.4 Effective CINR feedback for fast-feedback channel
1163 8.4.11.5 Enhanced fast-feedback channels
1166 8.4.11.6 Fast DL measurement feedback for enhanced fast-feedback channel
1167 8.4.11.7 Fast MIMO feedback of quantized precoding weight for enhanced fast-feedback channel
1168 8.4.11.8 MIMO mode feedback for enhanced fast-feedback channel
1171 8.4.11.9 Anchor BS report
8.4.11.10 UEP fast-feedback
1173 8.4.11.11 Band AMC differential CINR feedback for enhanced fast-feedback channel
8.4.11.12 Indication flag feedback
1174 8.4.11.13 Primary and secondary fast-feedback channels
1176 8.4.11.14 Extended rtPS BR
8.4.11.15 MIMO feedback for Tx beamforming
1185 8.4.11.16 MAP ACK Channel
8.4.11.17 MAP NACK Channel
1186 8.4.12 Channel quality measurements
8.4.12.1 Introduction
8.4.12.2 RSSI mean and standard deviation
1187 8.4.12.3 CINR mean and standard deviation
1190 8.4.12.4 Optional frequency selectivity characterization
8.4.13 Transmitter requirements
8.4.13.1 Tx power level control
1191 8.4.13.2 Transmitter spectral flatness
8.4.13.3 Transmitter constellation error and test method
1192 8.4.13.3.1 RMS constellation error measurement for BS (DL)
8.4.13.3.2 RMS constellation error measurement for SS
8.4.13.3.3 Calculation of RMS constellation error
1193 8.4.13.3.4 Unmodulated subcarrier errors for SS
1194 8.4.13.4 Transmitter reference timing accuracy
8.4.14 Receiver requirements
8.4.14.1 OFDMA PHY requirements for enhanced HO performance
8.4.14.1.1 Receiver sensitivity
1196 8.4.14.1.2 MS UL Tx time tracking accuracy
8.4.14.1.3 MS autonomous neighbor cell scanning
8.4.14.2 Receiver adjacent and nonadjacent channel rejection
8.4.14.3 Receiver maximum input signal
8.4.14.3.1 SS receiver maximum input signal
1197 8.4.14.3.2 BS receiver maximum input signal
8.4.14.4 Receiver maximum tolerable signal
8.4.14.4.1 SS receiver maximum tolerable signal
8.4.14.4.2 BS receiver maximum tolerable signal
8.4.15 Frequency control requirements
8.4.15.1 Center frequency and symbol clock frequency tolerance
8.4.16 Optional HARQ support
8.4.16.1 Optional Chase HARQ support
1198 8.4.16.1.1 HARQ retransmission process
8.4.16.1.2 CRC
8.4.16.1.3 Concurrent transmission of UL HARQ bursts
8.4.16.1.4 Encoding
8.4.16.2 Optional IR HARQ for convolutional code
8.4.16.3 UL ACK channel
1201 8.5 WirelessHUMAN specific components
8.5.1 Channelization
1204 8.5.2 Tx spectral mask
1205 9. Configuration
9.1 SS IP addressing used on secondary management connection
9.1.1 DHCP fields used by the SS
9.1.2 Mobile IP v4 fields used by the MS
1206 9.2 SS Configuration file
9.2.1 SS binary configuration file format
1207 9.2.2 Configuration file settings
9.2.3 Configuration file creation
1208 9.2.3.1 SS MIC calculation
9.3 ASN.1 Management Information Base
1209 9.3.1 WMAN-IF-MIB module
9.3.2 WMAN-DEV-MIB module
1210 9.3.3 WMAN-IF2-BS-MIB module
9.3.4 WMAN-IF2M-BS-MIB module
9.3.5 WMAN-IF2F-BS-MIB module
9.3.6 WMAN-IF2-SS-MIB module
1211 9.3.7 WMAN-IF2-TC-MIB module
9.4 Management protocols
9.4.1 SNMP
9.4.1.1 Relationship with interface MIB
9.4.1.1.1 MIB-2 integration
1212 9.4.1.1.2 Usage of MIB-II tables
1215 9.4.1.2 Events and traps
1217 10. Parameters and constants
10.1 Global values
1226 10.2 PKM parameter values
1228 10.3 PHY-specific values
10.3.1 WirelessMAN-SC parameter and constant definitions
10.3.1.1 PS
10.3.1.2 Symbol rate
10.3.1.3 UL center frequency
10.3.1.4 DL center frequency
10.3.1.5 Tolerated poll jitter
10.3.1.6 Allocation Start Time
1229 10.3.1.7 Timing Adjust Units
10.3.2 Reserved
10.3.3 WirelessMAN-OFDM parameters and constant definitions
10.3.3.1 Uplink Allocation Start Time
10.3.3.2 PS
10.3.3.3 Timing adjust units
10.3.4 WirelessMAN-OFDMA parameters and constant definitions
10.3.4.1 Uplink Allocation Start Time
10.3.4.2 PS
10.3.4.3 Timing adjust units
10.4 Well-known addresses and identifiers
1231 11. TLV encodings
11.1 Common encodings
1232 11.1.1 Current Tx power
1233 11.1.2 Authentication tuples
11.1.2.1 HMAC tuple
11.1.2.2 CMAC Tuple
1234 11.1.2.3 Short-HMAC tuple
1235 11.1.3 MAC version encoding
11.1.4 Service flow descriptors
1236 11.1.5 Vendor ID encoding
11.1.6 Vendor-specific information
1237 11.1.7 Sleep mode specific information
11.1.7.1 Enabled-Action-Triggered
11.1.7.2 SLPID_Update
11.1.7.3 Next Periodic Ranging
1238 11.1.8 Idle mode specific information
11.1.8.1 MAC Hash Skip Threshold
11.1.8.2 Paging Controller ID
11.1.8.3 Paging information
11.1.9 SA-TEK-Update
1240 11.1.10 NSP List encodings
11.1.10.1 NSP List
11.1.10.2 Verbose NSP Name List
1241 11.1.11 MIH message encodings
11.1.11.1 MIHF frame
11.1.11.2 MIHF frame type
1242 11.1.11.3 Query ID
11.1.12 MCID Update Management encoding
11.1.12.1 MCID pre-allocation and transmission info
1243 11.1.12.2 MCID Continuity and Transmission Info
1244 11.2 Configuration file encodings
1245 11.2.1 SS MIC configuration setting
11.2.2 Software upgrade descriptors
11.2.2.1 Vendor ID
11.2.2.2 Hardware ID
1246 11.2.2.3 Software version
11.2.2.4 Upgrade filename
11.2.3 Software upgrade TFTP server
11.2.4 TFTP Server Timestamp
11.2.5 MIB object write-access control
1247 11.2.6 Set MIB Object
1248 11.3 UCD management message encodings
11.3.1 UCD channel encodings
1258 11.3.1.1 Uplink burst profile encodings
1260 11.4 DCD management message encodings
1261 11.4.1 DCD channel encodings
1271 11.4.2 Downlink burst profile encodings
1274 11.5 RNG-REQ management message encodings
1277 11.6 RNG-RSP management message encodings
1282 11.7 REG-REQ/RSP management message encodings
1283 11.7.1 ARQ Parameters
1284 11.7.2 SS management support
11.7.3 IP management mode
11.7.4 IP version
1285 11.7.5 Secondary Management CID
11.7.6 Number of CIDs supported
11.7.6.1 Number of Uplink Transport CIDs Supported field
11.7.6.2 Number of Downlink Transport CIDs Supported field
11.7.7 CS capabilities
11.7.7.1 Classification/PHS options and SDU encapsulation support
1286 11.7.7.2 Maximum number of classification rules
1287 11.7.7.3 PHS support
11.7.7.4 ROHC support
11.7.8 SS capabilities encodings
11.7.8.1 ARQ Support
11.7.8.2 DSx flow control
1288 11.7.8.3 MCA flow control
11.7.8.4 Multicast polling group CID support
11.7.8.5 Maximum MAC data per frame support
11.7.8.5.1 Maximum amount of MAC level data per DL frame
1289 11.7.8.5.2 Maximum amount of MAC level data per UL frame
11.7.8.6 Packing support
11.7.8.7 MAC Extended rtPS support
11.7.8.8 Maximum number of bursts transmitted concurrently to the MS
1290 11.7.8.9 Co-located coexistence capability supported
11.7.8.10 H-FDD sleep capabilities
11.7.8.11 Extended capability
1291 11.7.9 CID Update Encodings field
11.7.9.1 Compressed CID Update Encodings field
1292 11.7.10 Method for allocating IP address for the secondary management connection
11.7.11 Reserved
11.7.12 HO Support
11.7.12.1 System Resource_Retain_Time
11.7.12.2 HO Process Optimization MS Timer
1293 11.7.12.3 MS Handover Retransmission Timer
11.7.12.4 HO parameters processing time
11.7.12.5 Handover Supported field
11.7.12.6 Handover indication readiness timer
1294 11.7.12.7 BS switching timer
11.7.13 Mobility parameters support
11.7.13.1 Mobility features supported
1295 11.7.13.2 Power saving class capability
11.7.14 Sleep mode recovery time
11.7.15 MS-PREV-IP-ADDR
1296 11.7.16 SKIP-ADDR-ACQUISITION
11.7.17 SAID Update Encodings field
11.7.18 Total number of provisioned service flow
1297 11.7.19 Idle mode
11.7.19.1 Idle mode timeout
11.7.20 ARQ-ACK Type
1298 11.7.21 MAC header and extended subheader support
11.7.22 SN Reporting Base
11.7.23 MS periodic ranging timer information
1299 11.7.24 MBS capabilities
11.8 SBC-REQ/RSP management message encodings
1300 11.8.1 Bandwidth Allocation Support
1301 11.8.2 Capabilities for Construction and Transmission of MAC PDUs
11.8.3 Physical Parameters Supported
11.8.3.1 Subscriber transition gaps
11.8.3.2 Maximum Tx power
1302 11.8.3.3 WirelessMAN-SC specific parameters
11.8.3.3.1 SC SS demodulator types
11.8.3.3.2 SC SS modulator types
11.8.3.3.3 SC SS Downlink FEC Types field
1303 11.8.3.3.4 SC SS Uplink FEC Types field
11.8.3.4 WirelessMAN-OFDM specific parameters
11.8.3.4.1 OFDM SS FFT sizes
11.8.3.4.2 OFDM SS demodulator
1304 11.8.3.4.3 OFDM SS modulator
11.8.3.4.4 OFDM SS TC sublayer support
11.8.3.4.5 OFDM private map support
1305 11.8.3.4.6 OFDM SS UL power control support
11.8.3.5 WirelessMAN-OFDMA specific parameters
11.8.3.5.1 OFDMA MS FFT sizes
11.8.3.5.2 OFDMA SS demodulator
1306 11.8.3.5.3 OFDMA SS modulator
1307 11.8.3.5.4 OFDMA SS permutation support
11.8.3.5.5 OFDMA SS demodulator for MIMO support
1309 11.8.3.5.6 OFDMA AAS private map support
11.8.3.5.7 OFDMA AAS capabilities
1310 11.8.3.5.8 OFDMA SS CINR measurement capability
11.8.3.5.9 OFDMA SS UL power control support
11.8.3.5.10 OFDMA MAP capability
1311 11.8.3.5.11 UL control channel support
11.8.3.5.12 OFDMA MS CSIT capability
1312 11.8.3.5.13 Maximum number of bursts per frame capability in HARQ
11.8.3.5.14 OFDMA SS modulator for MIMO support
1313 11.8.3.5.15 SDMA Pilot capability
11.8.3.5.16 OFDMA multiple DL burst profile capability
11.8.3.5.17 HARQ buffer capability
1314 11.8.3.5.17.1 HARQ incremental redundancy buffer capability
11.8.3.5.17.2 HARQ Chase combining and CC-IR buffer capability
11.8.3.5.18 OFDMA parameters sets
1320 11.8.3.5.19 Extended OFDMA SS CINR measurement capability
1321 11.8.4 Security negotiation parameters
11.8.4.1 PKM version support
11.8.4.2 Authorization policy support
1323 11.8.4.3 MAC (message authentication code) mode
1324 11.8.4.4 PN window size
11.8.4.5 PKM flow control
11.8.4.6 Maximum number of supported security associations
11.8.5 Extended subheader capability
1325 11.8.6 HO trigger metric support
11.8.7 Association type support
11.8.9 Service Information Query (SIQ)
1326 11.8.10 MIH Capability Supported
11.8.11 Visited NSP ID
1327 11.8.12 Auth Type for Single EAP
11.8.13 Visited NSP Realm
11.8.14 SII-ADV Message Pointer
1328 11.8.15 SDU MTU capability
11.8.16 DL Coordinated Zone capability
11.9 PKM-REQ/RSP management message encodings
1330 11.9.1 Display string
1331 11.9.2 AUTH-Key
11.9.3 TEK
1332 11.9.4 Key lifetime
11.9.5 Key sequence number
1333 11.9.6 HMAC digest
11.9.6.1 Short-HMAC digest
11.9.7 SAID
11.9.8 TEK parameters
1334 11.9.9 CBC-IV attribute
11.9.10 Error code
1335 11.9.11 CA certificate
1336 11.9.12 SS certificate
11.9.13 Security capabilities
11.9.14 Cryptographic suite
1338 11.9.15 Cryptographic-Suite-List parameter
11.9.16 SA-Descriptor attributer
1339 11.9.17 SA-Type attribute
11.9.18 PKM Configuration Settings field
1340 11.9.18.1 Authorize Wait Timeout field
11.9.18.2 Reauthorize Wait Timeout field
11.9.18.3 Authorization Grace Time field
11.9.18.4 Operational Wait Timeout field
11.9.18.5 Rekey Wait Timeout field
1341 11.9.18.6 TEK Grace Time field
11.9.18.7 Authorize Reject Wait Timeout field
11.9.19 Nonce attribute
11.9.20 SS_RANDOM attribute
11.9.21 BS_RANDOM attribute
1342 11.9.22 Encrypted Pre-PAK attribute
11.9.23 BS-Certificate attribute
11.9.24 SigBS attribute
11.9.25 MS-MAC Address attribute
1343 11.9.26 CMAC Digest attribute
11.9.27 Key push modes
1344 11.9.28 Key push counter
11.9.29 GKEK
1345 11.9.30 SigSS
11.9.31 Authorization key identifier (AKID)
11.9.32 EAP payload
11.9.33 Auth result code
1346 11.9.34 SA service type
11.9.35 Frame number
11.9.36 Associated GKEK Sequence Number
11.9.37 GKEK-Parameters
1347 11.9.38 MIH Cycle
11.9.39 MIH Delivery Method and Status Code
1348 11.10 MCA-REQ management message encodings
11.11 REP-REQ management message encodings
1351 11.12 REP-RSP management message encodings
1357 11.13 Service flow management encodings
1360 11.13.1 SFID
1361 11.13.2 CID
11.13.3 Service Class Name
11.13.4 QoS parameter set type
1363 11.13.5 Traffic Priority parameter
11.13.6 Maximum Sustained Traffic Rate parameter
11.13.7 Maximum Traffic Burst parameter
1364 11.13.8 Minimum Reserved Traffic Rate parameter
11.13.9 Vendor-specific QoS parameters
11.13.10 UL Grant Scheduling Type parameter
1365 11.13.11 Request/Transmission Policy parameter
11.13.12 Tolerated Jitter parameter
11.13.13 Maximum Latency parameter
1366 11.13.14 Fixed-Length Versus Variable-Length SDU Indicator parameter
11.13.15 SDU Size parameter
11.13.16 Target SAID parameter
1367 11.13.17 ARQ TLVs for ARQ-enabled connections
11.13.17.1 ARQ Enable TLV
11.13.17.2 ARQ_WINDOW_SIZE TLV
11.13.17.3 ARQ_RETRY_TIMEOUT TLV
1368 11.13.17.4 ARQ_BLOCK_LIFETIME TLV
11.13.17.5 ARQ_SYNC_LOSS_TIMEOUT TLV
11.13.17.6 ARQ_DELIVER_IN_ORDER TLV
1369 11.13.17.7 ARQ_RX_PURGE_TIMEOUT TLV
11.13.17.8 ARQ_BLOCK_SIZE TLV
11.13.17.9 RECEIVER_ARQ_ACK_PROCESSING_TIME TLV
1370 11.13.18 CS-specific service flow encodings
11.13.18.1 CS Specification parameter
11.13.18.2 CS parameter encoding rules
1371 11.13.18.3 Packet CS encodings for configuration and MAC messaging
11.13.18.3.1 QoS-related encodings
11.13.18.3.2 Classifier DSC Action
11.13.18.3.3 Packet Classification Rule parameter
1372 11.13.18.3.3.1 Classification Rule Priority field
11.13.18.3.3.2 Reserved
11.13.18.3.3.3 Protocol field
11.13.18.3.3.4 IP Masked Source Address parameter
1373 11.13.18.3.3.5 IP Masked Destination Address parameter
11.13.18.3.3.6 Protocol Source Port Range field
11.13.18.3.3.7 Protocol Destination Port Range field
1374 11.13.18.3.3.8 IEEE 802.3/Ethernet Destination MAC Address parameter
11.13.18.3.3.9 IEEE 802.3/Ethernet Source MAC Address parameter
11.13.18.3.3.10 Ethertype/IEEE 802.2 SAP
1375 11.13.18.3.3.11 IEEE 802.1D User Priority field
11.13.18.3.3.12 IEEE 802.1Q VLAN ID field
11.13.18.3.3.13 Associated PHSI field
1376 11.13.18.3.3.14 Packet Classification Rule Index field
11.13.18.3.3.15 Vendor-specific classification parameters
11.13.18.3.3.16 IPv6 Flow Label field
11.13.18.3.3.17 Classification Action Rule
1377 11.13.18.3.3.18 IP Type of Service
11.13.18.3.4 PHS DSC Action field
11.13.18.3.5 PHS Rule field
11.13.18.3.5.1 PHSI field
1378 11.13.18.3.5.2 PHSF field
11.13.18.3.5.3 PHSM field
11.13.18.3.5.4 PHSS field
1379 11.13.18.3.5.5 PHSV field
11.13.18.3.5.6 Vendor-specific PHS parameters
11.13.18.4 ATM CS encodings for configuration and MAC messaging
11.13.18.4.1 ATM Switching Encoding field
1380 11.13.18.4.2 ATM Classifier TLV field
11.13.18.4.2.1 VPI Classifier field
11.13.18.4.2.2 VCI Classification field
1381 11.13.18.4.2.3 ATM Classifier ID field
11.13.18.4.3 ATM Classifier DSC Action field
11.13.18.5 GPCS CS encodings for configuration and MAC messaging
11.13.18.5.1 GPCS PROTOCOL_TYPE encoding
1382 11.13.19 Unsolicited Grant Interval parameter
11.13.20 Unsolicited Polling Interval parameter
1383 11.13.21 FSN size TLV
11.13.22 MBS service TLV
11.13.23 Global Service Class Name field
1384 11.13.24 Type of Data Delivery Services parameter
11.13.25 SDU Inter-Arrival Interval parameter
11.13.26 Time Base parameter
11.13.27 MBS Zone Identifier Assignment parameter
1385 11.13.28 Paging Preference parameter
11.13.29 SN Feedback Enabled field
11.13.30 HARQ Service Flows field
1386 11.13.31 .CID Allocation for Active BSs field
11.13.32 Authorization Token field
11.13.33 HARQ Channel Mapping TLV
1387 11.13.34 PDU SN Extended Subheader for HARQ Reordering TLV
11.13.35 MBS contents IDs
1388 11.13.36 ROHC Parameter
11.13.36.1 ROHC Max Context ID
11.13.36.2 Large Context IDs
11.13.36.3 ROHC Profiles
11.13.36.4 ROHC Feedback Channel
1389 11.13.36.5 ROHC MRRU
11.13.37 Packet Error Rate (PER)
1390 11.13.38 PSC assignment
11.13.39 Group parameter Create/Change TLV
1392 11.13.40 Aggregated HARQ channels TLV
11.13.41 Priority indication
11.13.42 Regional Emergency Indication parameter
1394 11.14 DREG-CMD/REQ message encodings
1395 11.15 HO management encodings
11.15.1 Resource_Retain_Time
11.15.2 Alternate Target BS
11.15.3 Additional Action Time
1396 11.16 Sleep mode management encodings
11.16.1 Co-located-coexistence-enabled
11.16.2 Sleep mode functions enabled in H-FDD
11.17 MOB_PAG-ADV management message encodings
1397 11.17.1 CDMA code and transmission opportunity assignment
11.17.2 Page-Response window
11.18 MOB_NBR-ADV management message encodings
1398 11.18.1 MOB_NBR-ADV message encodings
1401 11.18.2 PHY mode ID
1402 11.19 MOB_SCN-REP message encodings
11.20 MOB_SCN-REQ/RSP message encodings
11.20.1 Recommended start frame
11.20.2 Sleep mode reactivation information
1403 11.21 LBS-ADV message encodings
11.21.1 Absolute Position TLV (Long Format)
1404 11.21.2 Absolute Position TLV (Short Format)
11.21.3 Relative Position TLV
1405 11.21.4 GPS Time TLV
1406 11.21.5 Frequency Accuracy TLV
1407 12. System profiles
12.1 WirelessMAN-SC Release 1.0
12.1.1 WirelessMAN-SC MAC system profiles
12.1.1.1 Basic ATM MAC system profile
1408 12.1.1.2 Basic Packet MAC system profile
12.1.1.3 Conventions for MAC management messages for profiles profM1 and profM2
12.1.1.4 MAC management message parameter transmission order
12.1.1.4.1 DCD
12.1.1.4.2 DL-MAP
1409 12.1.1.4.3 UCD
12.1.1.4.4 UL-MAP
12.1.1.4.5 RNG-REQ
12.1.1.4.6 RNG-RSP
12.1.1.4.7 REG-REQ
12.1.1.4.8 REG-RSP
1410 12.1.1.4.9 PKM-REQ: Auth Info
12.1.1.4.10 PKM-REQ: Auth Request
12.1.1.4.11 PKM-REQ: Key Request
12.1.1.4.12 PKM-RSP: SA Add
12.1.1.4.13 PKM-RSP: Auth Reply
12.1.1.4.14 PKM-RSP: Auth Reject
1411 12.1.1.4.15 PKM-RSP: Key Reply
12.1.1.4.16 PKM-RSP: Key Reject
12.1.1.4.17 PKM-RSP: Auth Invalid
12.1.1.4.18 PKM-RSP: TEK Invalid
12.1.1.4.19 DSA-REQ: BS Initiated Service Addition
1412 12.1.1.4.20 DSA-RSP: BS-initiated service addition
12.1.1.4.21 DSA-ACK
12.1.1.4.22 DSC-REQ: BS-initiated service change
1413 12.1.1.4.23 DSC-RSP: BS-initiated service change
12.1.1.4.24 DSC-ACK
12.1.1.4.25 DSD-REQ
12.1.1.4.26 DSD-RSP
12.1.1.4.27 MCA-REQ
12.1.1.4.28 MCA-RSP
12.1.1.4.29 DBPC-REQ
12.1.1.4.30 DBPC-RSP
12.1.1.4.31 RES-CMD
12.1.1.4.32 SBC-REQ
12.1.1.4.33 SBC-RSP
1414 12.1.1.4.34 CLK-CMP
12.1.1.4.35 DREG-CMD
12.1.1.4.36 DSX-RVD
12.1.1.4.37 TFTP-CPLT
12.1.1.4.38 TFTP-RSP
12.1.1.5 Message parameters specific to profM1
12.1.1.5.1 ATM CS Parameters for DSA-REQ: BS Initiated
12.1.1.5.2 ATM CS Parameters for DSA-RSP: BS Initiated
12.1.1.5.3 ATM CS Parameters for DSC-REQ: BS Initiated
12.1.1.5.4 ATM CS Parameters for DSC-RSP: BS Initiated
1415 12.1.1.6 Message parameters specific to profM2
12.1.1.6.1 Packet CS parameters for DSA-REQ: BS-initiated
12.1.1.6.2 Packet CS parameters for DSA-RSP: BS-initiated
12.1.1.6.3 Packet CS Parameters for DSC-REQ: BS Initiated
1416 12.1.1.6.4 Packet CS Parameters for DSC-RSP: BS Initiated
12.1.2 WirelessMAN-SC PHY Profiles
12.1.2.1 WirelessMAN-SC 25 MHz Channel PHY Profile
1421 12.1.2.1.1 FDD Specific WirelessMAN-SC 25 MHz Channel PHY Profile features
12.1.2.1.2 TDD Specific WirelessMAN-SC 25 MHz Channel PHY Profile features
12.1.2.2 WirelessMAN-SC 28 MHz Channel PHY Profile
1426 12.1.2.2.1 FDD Specific WirelessMAN-SC 28 MHz Channel PHY Profile features
12.1.2.2.2 TDD Specific WirelessMAN-SC 28 MHz Channel PHY Profile features
12.1.2.3 Conventions for MAC Management messages for profiles profP1 and profP2
12.1.2.4 UCD and DCD parameter transmission order for profP1 and profP2
12.1.2.4.1 DCD
12.1.2.4.2 UCD
1427 12.1.2.5 Initial Ranging IE usage for profP1 and profP2
12.2 Reserved
12.3 Fixed WirelessMan-OFDM
1428 12.3.1 WirelessMAN-OFDM and WirelessHUMAN(-OFDM) MAC profiles
12.3.1.1 ProfM3_PMP: Basic Packet PMP MAC System profile
1429 12.3.1.1.1 Conventions for MAC Management messages
1430 12.3.1.1.2 MAC Management Message Parameter Transmission Order
12.3.1.2 Reserved
12.3.2 WirelessMAN-OFDM and WirelessHUMAN(-OFDM) PHY profiles
12.3.2.1 ProfP3_1.75: WirelessMAN-OFDM PHY profile for 1.75MHz channelization
1431 12.3.2.2 ProfP3_3.5: WirelessMAN-OFDM PHY profile for 3.5 MHz channelization
1432 12.3.2.3 ProfP3_7: WirelessMAN-OFDM PHY profile for 7 MHz channelization
1433 12.3.2.4 ProfP3_3: WirelessMAN-OFDM PHY profile for 3 MHz channelization
1434 12.3.2.5 ProfP3_5.5: WirelessMAN-OFDM PHY profile for 5.5 MHz channelization
12.3.2.6 profP3_10: WirelessHUMAN(-OFDM) PHY profile for 10 MHz channelization
1435 12.3.3 WirelessMAN-OFDM RF profiles
12.3.3.1 RF profiles for 10 MHz channelization
12.3.3.1.1 ProfR10_1
12.3.3.1.2 profR10_2
12.3.3.1.3 profR10_3
1436 12.4 Fixed WirelessMAN-OFDMA
12.4.1 WirelessMAN-OFDMA Power class profiles
1437 12.4.2 WirelessMAN-OFDMA and WirelessHUMAN(-OFDMA) MAC profiles
12.4.2.1 Basic packet PMP MAC profile
12.4.2.1.1 Conventions for MAC management messages
12.4.2.1.2 MAC management message parameter transmission order
12.4.3 WirelessMAN-OFDMA and WirelessHUMAN(-OFDMA) system PHY profiles
12.4.3.1 Common features of PHY profiles
1438 12.4.3.1.1 General implementation requirements
12.4.3.1.2 FDD-Specific PHY profiles features
12.4.3.1.3 TDD-Specific PHY profiles features
12.4.3.1.4 WirelessHUMAN PHY profiles features
12.4.3.1.5 Minimum performance requirements
1440 12.4.3.2 WirelessMAN-OFDMA 1.25 MHz channel basic PHY profile
12.4.3.3 WirelessMAN-OFDMA 3.5 MHz channel basic PHY profile
1441 12.4.3.4 WirelessMAN-OFDMA 7 MHz channel basic PHY profile
1442 12.4.3.5 WirelessMAN-OFDMA 8.75 MHz channel basic PHY profile
12.4.3.6 WirelessMAN-OFDMA 14 MHz channel basic PHY profile
1443 12.4.3.7 WirelessMAN-OFDMA 17.5 MHz channel basic PHY profile
1444 12.4.3.8 WirelessMAN-OFDMA 28 MHz channel basic PHY profile
12.4.3.9 WirelessHUMAN(-OFDMA) 10 MHz channel basic PHY profile
1445 12.4.3.10 WirelessHUMAN(-OFDMA) 20 MHz channel basic PHY profile
12.4.4 WirelessMAN-OFDMA RF profiles
1447 12.5 WirelessMAN-OFDMA TDD Release 1
12.6 WirelessMAN-OFDMA TDD Release 1.5
12.7 WirelessMAN-OFDMA FDD Release 1.5
1449 13. MIB Modules
13.1 Structure of MIB modules
13.1.1 wmanIfMib (Obsolete)
13.1.2 wmanDevMib
13.1.2.1 wmanDevBsObjects
13.1.2.1.1 wmanDevBsSoftwareUpgradeTable
13.1.2.1.2 wmanDevBsNotification
1450 13.1.2.1.2.1 wmanDevBsTrapControl
13.1.2.1.2.2 wmanDevBsTrapDefinitions
13.1.2.2 wmanDevSsObjects
13.1.2.2.1 wmanDevSsConfigFileEncodingTable
13.1.2.2.2 wmanDevSsNotification
13.1.2.2.2.1 wmanDevSsTrapControl
13.1.2.2.2.2 wmanDevBsTrapDefinitions
1451 13.1.2.3 wmanDevCommonObjects
13.1.2.3.1 wmanDevCmnEventLog
13.1.2.3.1.1 wmanDevCmnEventLogConfigTable
13.1.2.3.1.2 wmanDevCmnEventTable
13.1.2.3.1.3 wmanDevCmnEventLogTable
1452 13.1.2.3.2 wmanDevCmnSnmpAgent
13.1.2.3.2.1 wmanDevCmnSnmpV1V2TrapDestTable
13.1.2.3.3 wmanDevCmnDeviceConfig
13.1.3 wmanIf2BsMib
13.1.3.1 wmanIf2BsFm
1453 13.1.3.1.1 wmanIf2BsTrapControl
13.1.3.1.1.1 wmanIf2BsTrapControlRegister
13.1.3.1.1.2 wmanIf2BsStatusTrapControlRegister
13.1.3.1.1.3 wmanIf2BsThresholdConfigTable
13.1.3.1.2 wmanIf2BsTrapDefinitions
13.1.3.1.2.1 wmanIf2BsTrapPrefix
13.1.3.1.2.2 wmanIf2BsSsNotificationObjectsTable
13.1.3.2 wmanIf2BsCm
1454 13.1.3.2.1 wmanIf2BsRegisteredSsTable
13.1.3.2.2 wmanIf2BsConfigurationTable
13.1.3.2.3 wmanIf2BsSsReqCapabilitiesTable
13.1.3.2.4 wmanIf2BsSsRspCapabilitiesTable
13.1.3.2.5 wmanIf2BsBasicCapabilitiesTable
13.1.3.2.6 wmanIf2BsCapabilitiesConfigTable
1455 13.1.3.2.7 wmanIf2BsSsActionsTable
13.1.3.2.8 wmanIf2BsMulticastPollingTable
13.1.3.2.9 wmanIf2BsMbsContentTable
13.1.3.2.10 wmanIf2BsPhy
13.1.3.2.10.1 wmanIf2BsCmnPhy
1456 13.1.3.2.10.1.1 wmanIf2BsCmnPhyUplinkChannelTable
13.1.3.2.10.1.2 wmanIf2BsCmnPhyDownlinkChannelTable
13.1.3.2.10.2 wmanIf2BsOfdmPhy
13.1.3.2.10.2.1 wmanIf2BsOfdmUplinkChannelTable
13.1.3.2.10.2.2 wmanIf2BsOfdmDownlinkChannelTable
13.1.3.2.10.2.3 wmanIf2BsOfdmUcdBurstProfileTable
13.1.3.2.10.2.4 wmanIf2BsOfdmDcdBurstProfileTable
13.1.3.2.10.3 wmanIf2BsOfdmaPhy
13.1.3.2.10.3.1 wmanIf2BsOfdmaUplinkChannelTable
13.1.3.2.10.3.2 wmanIf2BsOfdmaDownlinkChannelTable
13.1.3.2.10.3.3 wmanIf2BsOfdmaUcdBurstProfileTable
13.1.3.2.10.3.4 wmanIf2BsOfdmaDcdBurstProfileTable
1457 13.1.3.3 wmanIf2BsAm
13.1.3.3.1 wmanIf2BsOtaUsageDataRecordTable
13.1.3.4 wmanIf2BsPm
13.1.3.4.1 wmanIf2BsPmConfigurationTable
13.1.3.4.2 wmanIf2BsRssiCinrMetricsTable
1458 13.1.3.4.3 wmanIf2BsStartupMetricsTable
13.1.3.4.4 wmanIf2BsThroughputMetricsTable
13.1.3.4.5 wmanIf2BsNetworkEntryMetricsTable
13.1.3.4.6 wmanIf2BsPacketErrorRateTable
13.1.3.4.7 wmanIf2BsHandoverMetricsTable
13.1.3.4.8 wmanIf2BsUserMetricsTable
13.1.3.4.9 wmanIf2BsCidMetricsTable
13.1.3.4.10 wmanIf2BsServiceFlowMetricsTable
13.1.3.4.11 wmanIf2BsArqHarqMetricsTable
13.1.3.4.12 wmanIf2BsAuthenticationMetricsTable
13.1.3.5 wmanIf2BsSm
1459 13.1.3.5.1 wmanIf2BsPkmSecurityCapabilityTable
13.1.3.5.2 wmanIf2BsSsPkmSecurityCapabilityTable
13.1.3.5.3 wmanIf2BsPkmV1Objects
13.1.3.5.3.1 wmanIf2BsPkmV1ConfigTable
13.1.3.5.3.2 wmanIf2BsSsPkmV1AuthorizationTable
13.1.3.5.3.3 wmanIf2BsSsPkmV1TekTable
13.1.3.5.4 wmanIf2BsPkmV2Objects
13.1.3.5.4.1 wmanIf2BsPkmV2ConfigTable
1460 13.1.3.5.4.2 wmanIf2BsSsPkmV2RsaAuthTable
13.1.3.5.4.3 wmanIf2BsSsPkmV2TekTable
13.1.3.5.4.4 wmanIf2BsSsPkmV23wayHandshakeTable
13.1.4 wmanIf2mBsMib
13.1.4.1 wmanIf2mBsCm
13.1.4.1.1 wmanIf2mBsConfiguration
1461 13.1.4.1.1.1 wmanIf2mBsConfigurationTable
13.1.4.1.1.2 wmanIf2mBsSsReqCapabilitiesTable
13.1.4.1.1.3 wmanIf2mBsSsRspCapabilitiesTable
13.1.4.1.1.4 wmanIf2mBsBasicCapabilitiesTable
13.1.4.1.1.5 wmanIf2mBsCapabilitiesConfigTable
13.1.4.1.1.6 wmanIf2mBsSsCidUpdateTable
1462 13.1.4.1.1.7 wmanIf2mBsNetworkServiceProviderTable
13.1.4.1.2 wmanIf2mBsPowerSavingMode
13.1.4.1.2.1 wmanIf2mBsSsPwrSaving2CidMapTable
13.1.4.1.2.2 wmanIf2mBsSsPowerSavingClassesTable
13.1.4.1.3 wmanIf2mBsNeighborAdv
13.1.4.1.3.1 wmanIf2mBsNeighborAdvCommonTable
13.1.4.1.3.2 wmanIf2mBsNeighborAdvertizementTable
1463 13.1.4.1.3.3 wmanIf2mBsNeighborBsOfdmaUcdTable
13.1.4.1.3.4 wmanIf2mBsNeighborBsOfdmaDcdTable
13.1.4.1.3.5 wmanIf2mBsLbsAdvNeighborBsTable
13.1.4.1.4 wmanIf2mBsPaging
13.1.4.1.4.1 wmanIf2mBsPagingAdvertizementTable
13.1.4.1.4.2 wmanIf2mBsMsPagedTable
13.1.4.1.4.3 wmanIf2mBsPagingGroupsTable
13.1.4.1.5 wmanIf2mBsServiceFlow
1464 13.1.4.1.5.1 wmanIf2mBsServiceFlowTable
13.1.4.1.5.2 wmanIf2mBsClassifierRuleTable
13.1.4.1.5.3 wmanIf2mBsPhsRuleTable
13.1.4.1.5.4 wmanIf2mBsQoSProfileTable
13.1.4.1.5.5 wmanIf2mBsArqAttributeTable
13.1.4.2 wmanIf2mBsPm
1465 13.1.4.2.1 wmanIf2mBsSsSleepModeStatisticsTable
13.1.4.2.2 wmanIf2mBsMobileScanRequestTable
13.1.4.2.3 wmanIf2mBsMobileScanResponseTable
13.1.4.2.4 wmanIf2mBsNeighborBsInfoTable
13.1.4.2.5 wmanIf2mBsDiversityBsInfoTable
13.1.5 wmanIf2fBsMib
1466 13.1.5.1 wmanIf2fBsProvServiceFlowTable
13.1.5.2 wmanIf2fBsProvServiceClassTable
13.1.5.3 wmanIf2fBsServiceFlowTable
13.1.5.4 wmanIf2fBsProvClassifierRuleTable
13.1.5.5 wmanIf2fBsProvPhsRuleTable
13.1.5.6 wmanIf2fBsClassifierRuleTable
13.1.5.7 wmanIf2fBsPhsRuleTable
13.1.6 wmanIf2SsMib
1467 13.1.6.1 wmanIf2SsConfigurationTable
13.1.6.2 wmanIf2mSsConfigurationTable
13.1.6.3 wmanIf2SsTrapControl
13.1.6.3.1 wmanIf2SsTrapControlRegister
13.1.6.3.2 wmanIf2SsThresholdConfigTable
13.1.6.4 wmanIf2SsTrapDefinitions
13.1.6.4.1 wmanIf2SsTrapPrefix
13.1.6.4.2 wmanIf2SsNotificationObjectsTable
13.1.7 wmanIf2TcMib
13.2 ASN.1 Definitions of MIB Modules
13.2.1 wmanIfMib (Obsolete)
13.2.2 wmanDevMib
1485 13.2.3 wmanIf2BsMib
1669 13.2.4 wmanIf2mBsMib
1780 13.2.5 wmanIf2fBsMib
1822 13.2.6 wmanIf2SsMib
1842 13.2.7 wmanIf2TcMib
1863 14. Management interfaces and procedures
14.1 Service primitive template
14.1.1 Universal naming schema for SAP service primitive
1864 14.1.2 SAP service primitive object format
14.1.2.1 M-SAP/C-SAP operation service primitive
1865 14.1.2.2 M-SAP/C-SAP notification service primitive:
14.1.3 SAP service primitive flow diagram template
1866 14.2 Management and control functions
14.2.1 Accounting management
14.2.1.1 Accounting procedure
1868 14.2.1.2 Service primitives for accounting management
14.2.1.2.1 M-ACM-REQ
14.2.1.2.1.1 Function
14.2.1.2.1.2 Semantics of the service primitive
14.2.1.2.1.3 When generated
14.2.1.2.1.4 Effect of receipt
14.2.1.2.2 M-ACM-RSP
14.2.1.2.2.1 Function
14.2.1.2.2.2 Semantics of the service primitive
1869 14.2.1.2.2.3 When generated
14.2.1.2.2.4 Effect of receipt
14.2.1.2.3 M-ACM-IND
14.2.1.2.3.1 Function
1870 14.2.1.2.3.2 Semantics of the service primitive
14.2.1.2.3.3 When generated
14.2.1.2.3.4 Effect of receipt
14.2.2 Security management
14.2.2.1 EAP-based authentication procedure
1871 14.2.2.1.1 C-SM-IND
14.2.2.1.1.1 C-SM-IND (Event_Type = EAP_Start)
14.2.2.1.1.1.1 Function
1872 14.2.2.1.1.1.2 Semantics of the service primitives
14.2.2.1.1.1.3 When generated
14.2.2.1.1.1.4 Effect of receipt
14.2.2.1.1.2 Reserved
14.2.2.1.1.3 C-SM-IND (Event_Type = AK Transfer)
14.2.2.1.1.3.1 Function
14.2.2.1.1.3.2 Semantics of the service primitives
1873 14.2.2.1.1.3.3 When generated
14.2.2.1.1.3.4 Effect of receipt
14.2.2.1.1.4 C-SM-IND (Event_Type = EAP_Transfer)
14.2.2.1.1.4.1 Function
14.2.2.1.1.4.2 Semantics of the service primitives
1874 14.2.2.1.1.4.3 When generated
14.2.2.1.1.4.4 Effect of receipt
14.2.2.1.1.5 Reserved
14.2.2.2 RSA-based authentication procedure
1875 14.2.2.2.1 C-SM-IND
14.2.2.2.1.1 Function
14.2.2.2.1.2 Semantics of the service primitives
1876 14.2.2.2.1.3 When generated
14.2.2.2.1.4 Effect of receipt
14.2.2.2.2 C-SM-REQ
14.2.2.2.2.1 Function
14.2.2.2.2.2 Semantics of the service primitives
1877 14.2.2.2.2.3 When generated
14.2.2.2.2.4 Effect of receipt
14.2.2.2.3 C-SM-RSP
14.2.2.2.3.1 Function
14.2.2.2.3.2 Semantics of the service primitives
1878 14.2.2.2.3.3 When generated
14.2.2.2.3.4 Effect of receipt
14.2.2.3 Security for handoffs (EAP only)
1879 14.2.2.3.1 Service primitives
14.2.2.3.1.1 C-SM-REQ
14.2.2.3.1.1.1 Function
14.2.2.3.1.1.2 Semantics of the service primitives
1880 14.2.2.3.1.1.3 When generated
14.2.2.3.1.1.4 Effect of receipt
14.2.2.3.1.2 C-SM-RSP
14.2.2.3.1.2.1 Function
14.2.2.3.1.2.2 Semantics of the service primitives
1881 14.2.2.3.1.2.3 When generated
14.2.2.3.1.2.4 Effect of receipt
14.2.3 IP management with Secondary Management Connection
1882 14.2.3.1 M-SMC-IND
14.2.3.1.1 M-SMC-IND (Event_Type = SMC-PAYLOAD)
14.2.3.1.1.1 Function
14.2.3.1.1.2 Semantics of the service primitives
1883 14.2.3.1.1.3 When generated
14.2.3.1.1.4 Effect of receipt
14.2.3.1.2 M-SMC-IND(Event_Type = IP_ALLOCATION)
14.2.3.1.2.1 Function
14.2.3.1.2.2 Semantics of the service primitives
1884 14.2.3.1.2.3 When generated
14.2.3.1.2.4 Effect of receipt
14.2.4 Subscriber mode management
14.2.4.1 Managing device states
1886 14.2.4.2 Idle mode management primitives
1888 14.2.4.2.1 C-IMM-REQ
14.2.4.2.1.1 C-IMM-REQ (Action_Type = Idle_Mode_Initiation)
14.2.4.2.1.1.1 Function
14.2.4.2.1.1.2 Semantics of the service primitive
1889 14.2.4.2.1.1.3 When generated
14.2.4.2.1.1.4 Effect of receipt
14.2.4.2.1.2 C-IMM-REQ (Action_Type = Network_Re-Entry_from_Idle_Mode)
14.2.4.2.1.2.1 Function
14.2.4.2.1.2.2 Semantics of the service primitive
1890 14.2.4.2.1.2.3 When generated
14.2.4.2.1.2.4 Effect of receipt
14.2.4.2.2 C-IMM-RSP
1891 14.2.4.2.2.1 C-IMM-RSP (Action_Type = Idle_Mode_Initiation)
14.2.4.2.2.1.1 Function
14.2.4.2.2.1.2 Semantics of the service primitive
14.2.4.2.2.1.3 When generated
1892 14.2.4.2.2.1.4 Effect of receipt
14.2.4.2.2.2 C-IMM-RSP (Action_Type = Network_Re-Entry_from_Idle_Mode)
14.2.4.2.2.2.1 Function
14.2.4.2.2.2.2 Semantics of the service primitive
14.2.4.2.2.2.3 When generated
1893 14.2.4.2.2.2.4 Effect of receipt
14.2.4.2.3 C-IMM-ACK
14.2.4.2.3.1 Function
14.2.4.2.3.2 Semantics of the service primitive
1894 14.2.4.2.3.3 When generated
14.2.4.2.3.4 Effect of receipt
14.2.4.2.4 C-IMM-IND
14.2.4.2.4.1 Function
14.2.4.2.4.2 Semantics of the service primitive
14.2.4.2.4.3 When generated
1895 14.2.4.2.4.4 Effect of receipt
14.2.4.3 Location update procedure
1896 14.2.4.3.1 C-IMM-REQ
14.2.4.3.1.1 Function
14.2.4.3.1.2 Semantics of the service primitive
1897 14.2.4.3.1.3 When generated
14.2.4.3.1.4 Effect of receipt
14.2.4.3.2 C-IMM-RSP
1898 14.2.4.3.2.1 Function
14.2.4.3.2.2 Semantics of the service primitive
1899 14.2.4.3.2.3 When generated
14.2.4.3.2.4 Effect of receipt
14.2.4.3.3 C-IMM-IND
14.2.4.3.3.1 Function
14.2.4.3.3.2 Semantics of the service primitive
1900 14.2.4.3.3.3 When generated
14.2.4.3.3.4 Effect of receipt
14.2.5 Handover management
14.2.5.1 Handover context for connections
14.2.5.2 Handover control protocol procedures
1905 14.2.5.2.1 C-HO-REQ
14.2.5.2.1.1 C-HO-REQ(Action_Type = HO-Serving)
14.2.5.2.1.1.1 Function
14.2.5.2.1.1.2 Semantics of the service primitive
1906 14.2.5.2.1.1.3 When generated
14.2.5.2.1.1.4 Effect of receipt
1907 14.2.5.2.1.2 C-HO-REQ(Action_Type = HO-Target)
14.2.5.2.1.2.1 Function
14.2.5.2.1.2.2 Semantics of the service primitive
14.2.5.2.1.2.3 When generated
14.2.5.2.1.2.4 Effect of receipt
1908 14.2.5.2.1.3 C-HO-REQ(Action_Type = HO-Scan)
14.2.5.2.1.3.1 Function
14.2.5.2.1.3.2 Semantics of the service primitive
14.2.5.2.1.3.3 When generated
1909 14.2.5.2.1.3.4 Effect of receipt
14.2.5.2.1.4 C-HO-REQ(Action_Type = HO-Mobile)
14.2.5.2.1.4.1 Function
14.2.5.2.1.4.2 Semantics of the service primitive
1910 14.2.5.2.1.4.3 When generated
14.2.5.2.1.4.4 Effect of receipt
14.2.5.2.2 C-HO-RSP
14.2.5.2.2.1 C-HO-RSP(Action_Type = HO-Serving)
14.2.5.2.2.1.1 Function
1911 14.2.5.2.2.1.2 Semantics of the service primitive
14.2.5.2.2.1.3 When generated
14.2.5.2.2.1.4 Effect of receipt
14.2.5.2.2.2 C-HO-RSP(Action_Type = HO-Target)
14.2.5.2.2.2.1 Function
1912 14.2.5.2.2.2.2 Semantics of the service primitive
14.2.5.2.2.2.3 When generated
14.2.5.2.2.2.4 Effect of receipt
14.2.5.2.2.3 C-HO-RSP(Action_Type = HO-Scan)
14.2.5.2.2.3.1 Function
1913 14.2.5.2.2.3.2 Semantics of the service primitive
1914 14.2.5.2.2.3.3 When generated
14.2.5.2.2.3.4 Effect of receipt
14.2.5.2.2.4 C-HO-RSP(Action_Type = HO-Mobile)
14.2.5.2.2.4.1 Function
14.2.5.2.2.4.2 Semantics of the service primitive
1915 14.2.5.2.2.4.3 When generated
14.2.5.2.2.4.4 Effect of receipt
14.2.5.2.3 C-HO-IND
14.2.5.2.3.1 C-HO-IND (Event_Type = HO-Start)
14.2.5.2.3.1.1 Function
14.2.5.2.3.1.2 Semantics of the service primitive
1916 14.2.5.2.3.1.3 When generated
14.2.5.2.3.1.4 Effect of receipt
14.2.5.2.3.2 C-HO-IND (Event_Type = HO-Cancel)
14.2.5.2.3.2.1 Function
14.2.5.2.3.2.2 Semantics of the service primitive
1917 14.2.5.2.3.2.3 When generated
14.2.5.2.3.2.4 Effect of receipt
14.2.5.2.3.3 C-HO-IND (Event_Type = HO-Scan)
14.2.5.2.3.3.1 Function
14.2.5.2.3.3.2 Semantics of the service primitive
1918 14.2.5.2.3.3.3 When generated
14.2.5.2.3.3.4 Effect of receipt
14.2.5.2.3.4 C-HO-IND (Event_Type = HO-CMPLT)
14.2.5.2.3.4.1 Function
14.2.5.2.3.4.2 Semantics of the service primitive
1919 14.2.5.2.3.4.3 When generated
14.2.5.2.3.4.4 Effect of receipt
14.2.5.3 MIH control protocol procedures
1920 14.2.5.3.1 C-MIH-IND
14.2.5.3.1.1 Function
14.2.5.3.1.2 Semantics of the service primitive
1921 14.2.5.3.1.3 When generated
14.2.5.3.1.4 Effect of receipt
14.2.6 Radio resource management
1922 14.2.6.1 C-RRM-REQ
1923 14.2.6.1.1 C-RRM-REQ (Action_Type = Spare Capacity Report)
14.2.6.1.1.1 Function
14.2.6.1.1.1.1 Semantics of the service primitive:
1924 14.2.6.1.1.1.2 When generated
14.2.6.1.1.1.3 Effect of receipt
14.2.6.1.2 C-RRM-REQ (Action_Type = PHY report)
14.2.6.1.2.1 Function
14.2.6.1.2.2 Semantics of the service primitive:
14.2.6.1.2.3 When generated
14.2.6.1.2.4 Effect of receipt
14.2.6.2 C-RRM-RSP
1925 14.2.6.2.1 C-RRM-RSP(Action_Type = Spare Capacity Report)
14.2.6.2.1.1 Function
14.2.6.2.1.2 Semantics of the service primitive:
1926 14.2.6.2.1.3 When generated
14.2.6.2.1.4 Effect of receipt
14.2.6.2.2 C-RRM-RSP(Action_Type = PHY Report)
14.2.6.2.2.1 Function
14.2.6.2.2.2 Semantics of the service primitive:
1927 14.2.6.2.2.3 When generated
14.2.6.2.2.4 Effect of receipt
14.2.6.3 C-RRM-IND
1928 14.2.6.3.1 C-RRM-IND (Event_Type = Spare Capacity Report)
14.2.6.3.1.1 Function
14.2.6.3.1.2 Semantics of the service primitive:
1929 14.2.6.3.1.3 When generated
14.2.6.3.1.4 Effect of receipt
14.2.6.3.2 C-RRM-IND (Event_Type = Neighbor-BS Radio Resource Status Update)
14.2.6.3.2.1 Function
14.2.6.3.2.2 Semantics of the service primitive:
1931 14.2.6.3.2.3 When generated
14.2.6.3.2.4 Effect of receipt
14.2.7 Network entry & exit management
1935 14.2.7.1 C-NEM-REQ
14.2.7.1.1 C-NEM-REQ (Action_Type = Ranging)
14.2.7.1.1.1 SS side
14.2.7.1.1.1.1 Function
14.2.7.1.1.1.2 Semantics:
14.2.7.1.1.1.3 When generated
14.2.7.1.1.1.4 Effect of receipt
1936 14.2.7.1.1.2 BS side
14.2.7.1.1.2.1 Function
14.2.7.1.1.2.2 Semantics:
14.2.7.1.1.2.3 When generated
14.2.7.1.1.2.4 Effect of receipt
1937 14.2.7.1.2 C-NEM-REQ (Action_Type = SS Basic Capability)
14.2.7.1.2.1 Function
14.2.7.1.2.2 Semantics:
14.2.7.1.2.3 When generated
14.2.7.1.2.4 Effect of receipt
14.2.7.1.3 C-NEM-REQ (Action_Type = Registration)
14.2.7.1.3.1 SS side
14.2.7.1.3.1.1 Function
14.2.7.1.3.1.2 Semantics:
1938 14.2.7.1.3.1.3 When generated
14.2.7.1.3.1.4 Effect of receipt
14.2.7.1.3.2 BS side
14.2.7.1.3.2.1 Function
14.2.7.1.3.2.2 Semantics:
1939 14.2.7.1.3.2.3 When generated
14.2.7.1.3.2.4 Effect of receipt
14.2.7.1.4 C-NEM-REQ (Action_Type = Deregistration)
14.2.7.1.4.1 Function
14.2.7.1.4.2 Semantics:
1940 14.2.7.1.4.3 When generated
14.2.7.1.4.4 Effect of receipt
14.2.7.2 C-NEM-RSP
1941 14.2.7.2.1 C-NEM-RSP (Action_Type = Ranging)
14.2.7.2.1.1 BS side
14.2.7.2.1.1.1 Function
14.2.7.2.1.1.2 Semantics:
14.2.7.2.1.1.3 When generated
14.2.7.2.1.1.4 Effect of receipt
14.2.7.2.1.2 SS side
14.2.7.2.1.2.1 Function
14.2.7.2.1.2.2 Semantics:
1942 14.2.7.2.1.2.3 When generated
14.2.7.2.1.2.4 Effect of receipt
14.2.7.2.2 C-NEM-RSP (Action_Type = SS Basic Capability)
14.2.7.2.2.1 Function
14.2.7.2.2.2 Semantics:
1943 14.2.7.2.2.3 When generated
14.2.7.2.2.4 Effect of receipt
14.2.7.2.3 C-NEM-RSP (Action_Type = Registration)
14.2.7.2.3.1 BS side
14.2.7.2.3.1.1 Function
14.2.7.2.3.1.2 Semantics:
1944 14.2.7.2.3.1.3 When generated
14.2.7.2.3.1.4 Effect of receipt
14.2.7.2.3.2 SS side
14.2.7.2.3.2.1 Function
14.2.7.2.3.2.2 Semantics:
1945 14.2.7.2.3.2.3 When generated
14.2.7.2.3.2.4 Effect of receipt
14.2.7.2.4 C-NEM-RSP (Action_Type = Deregistration)
14.2.7.2.4.1 Function
14.2.7.2.4.2 Semantics:
14.2.7.2.4.3 When generated
1946 14.2.7.2.4.4 Effect of receipt
14.2.7.3 C-NEM-IND (Event_Type = NBR_BS_Update)
14.2.7.3.1 Function
14.2.7.3.2 Semantics:
1947 14.2.7.3.3 When generated
14.2.7.3.4 Effect of receipt
14.2.7.4 C-NEM-IND (Event_Type = network attached)
14.2.7.4.1 Function
14.2.7.4.2 Semantics of the service primitive:
14.2.7.4.3 When generated
14.2.7.4.4 Effect of receipt
14.2.8 Subscriber Station Management
1950 14.2.8.1 M-SSM-REQ
14.2.8.1.1 M-SSM-REQ (Action_Type = Power On)
14.2.8.1.1.1 Function
14.2.8.1.1.2 Semantics of the service primitive:
14.2.8.1.1.3 When generated
14.2.8.1.1.4 Effect of receipt
14.2.8.1.2 M-SSM-REQ (Action_Type = Power Down)
14.2.8.1.2.1 Function
1951 14.2.8.1.2.2 Semantics of the service primitive:
14.2.8.1.2.3 When generated
14.2.8.1.2.4 Effect of receipt
14.2.8.1.3 M-SSM-REQ (Action_Type = Reset)
14.2.8.1.3.1 Function
14.2.8.1.3.2 Semantics of the service primitive:
14.2.8.1.3.3 When generated
14.2.8.1.3.4 Effect of receipt
1952 14.2.8.1.4 M-SSM-REQ (Action_Type = Hold)
14.2.8.1.4.1 Function
14.2.8.1.4.2 Semantics of the service primitive:
14.2.8.1.4.3 When generated
14.2.8.1.4.4 Effect of receipt
14.2.8.1.5 M-SSM-REQ (Action_Type = Normal)
14.2.8.1.5.1 Function
14.2.8.1.5.2 Semantics of the service primitive:
1953 14.2.8.1.5.3 When generated
14.2.8.1.5.4 Effect of receipt
14.2.8.2 M-SSM-RSP
14.2.8.2.1 M-SSM- RSP (Action_Type = Power On)
14.2.8.2.1.1 Function
14.2.8.2.1.2 Semantics of the service primitive:
1954 14.2.8.2.1.3 When generated
14.2.8.2.1.4 Effect of receipt
14.2.8.2.2 M-SSM- RSP (Action_Type = Power Down)
14.2.8.2.2.1 Function
14.2.8.2.2.2 Semantics of the service primitive:
14.2.8.2.2.3 When generated
14.2.8.2.2.4 Effect of receipt
14.2.8.2.3 M-SSM- RSP (Action_Type = Reset)
14.2.8.2.3.1 Function
14.2.8.2.3.2 Semantics of the service primitive:
1955 14.2.8.2.3.3 When generated
14.2.8.2.3.4 Effect of receipt
14.2.8.2.4 M-SSM-RSP (Action_Type = Hold)
14.2.8.2.4.1 Function
14.2.8.2.4.2 Semantics of the service primitive:
14.2.8.2.4.3 When generated
14.2.8.2.4.4 Effect of receipt
14.2.8.2.5 M-SSM-RSP (Action_Type = Normal)
14.2.8.2.5.1 Function
1956 14.2.8.2.5.2 Semantics of the service primitive:
14.2.8.2.5.3 When generated
14.2.8.2.5.4 Effect of receipt
14.2.8.3 M-SSM-IND
14.2.8.3.1 M-SSM-IND (Event_Type = Reset)
14.2.8.3.1.1 Function
14.2.8.3.1.2 Semantics of the service primitive:
1957 14.2.8.3.1.3 When generated
14.2.8.3.1.4 Effect of receipt
14.2.8.3.2 M-SSM-IND (Event_Type = Hold)
14.2.8.3.2.1 Function
14.2.8.3.2.2 Semantics of the service primitive:
14.2.8.3.2.3 When generated
14.2.8.3.2.4 Effect of receipt
14.2.8.3.3 M-SSM-IND (Event_Type = Normal)
14.2.8.3.3.1 Function
1958 14.2.8.3.3.2 Semantics of the service primitive:
14.2.8.3.3.3 When generated
14.2.8.3.3.4 Effect of receipt
14.2.9 QoS management
1961 14.2.9.1 C-SFM-REQ
1962 14.2.9.1.1 C-SFM-REQ (Operation_Type = Create)
14.2.9.1.1.1 Function
14.2.9.1.1.2 Semantics of the service primitive:
14.2.9.1.1.3 When generated
14.2.9.1.1.4 Effect of receipt
1963 14.2.9.1.2 C-SFM-REQ (Operation_Type = Set)
14.2.9.1.2.1 Function
14.2.9.1.2.2 Semantics of the service primitive:
14.2.9.1.2.3 When generated
1964 14.2.9.1.2.4 Effect of receipt
14.2.9.1.3 C-SFM-REQ (Operation_Type = Delete)
14.2.9.1.3.1 Function
14.2.9.1.3.2 Semantics of the service primitive:
14.2.9.1.3.3 When generated
14.2.9.1.3.4 Effect of receipt
1965 14.2.9.2 C-SFM-RSP
14.2.9.2.1 C-SFM-RSP (Operation_Type = Create)
14.2.9.2.1.1 Function
14.2.9.2.1.2 Semantics of the service primitive:
1966 14.2.9.2.1.3 When generated
14.2.9.2.1.4 Effect of receipt
14.2.9.2.2 C-SFM-RSP (Operation_Type = Set)
14.2.9.2.2.1 Function
14.2.9.2.2.2 Semantics of the service primitive:
1967 14.2.9.2.2.3 When generated
14.2.9.2.2.4 Effect of receipt
14.2.9.2.3 C-SFM-RSP(Operation_Type = Delete)
14.2.9.2.3.1 Function
14.2.9.2.3.2 Semantics of the service primitive:
1968 14.2.9.2.3.3 When generated
14.2.9.2.3.4 Effect of receipt
14.2.10 Multicast and Broadcast Service Management
14.2.10.1 MBS Capability Discovery
1969 14.2.10.1.1 C-MBS-REQ (Operation_Type = Get)
14.2.10.1.1.1 Function
14.2.10.1.1.2 Semantics of this primitive
14.2.10.1.1.3 When generated
14.2.10.1.1.4 Effect of receipt
14.2.10.1.2 C-MBS-RSP (Operation_Type = Get)
14.2.10.1.2.1 Function
14.2.10.1.2.2 Semantics of this primitive
14.2.10.1.2.3 When generated
14.2.10.1.2.4 Effect of receipt
1970 14.2.10.2 MBS Configuration Management Setting
14.2.10.2.1 C-MBS-REQ (Operation_Type = Set)
14.2.10.2.1.1 Function
14.2.10.2.1.2 Semantics of this primitive
1971 14.2.10.2.1.3 When generated
14.2.10.2.1.4 Effect of receipt
14.2.10.2.2 C-MBS-RSP (Operation_Type = Set)
14.2.10.2.2.1 Function
14.2.10.2.2.2 Semantics of this primitive
14.2.10.2.2.3 When generated
14.2.10.2.2.4 Effect of receipt
1972 14.2.10.3 MBS Configuration Management Layout
1973 14.2.10.3.1 C-MBS-IND (MBS Portion Layout)
14.2.10.3.1.1 Function
14.2.10.3.1.2 Semantics of this primitive
1974 14.2.10.3.1.3 When generated
14.2.10.3.1.4 Effect of receipt
1975 14.2.10.3.2 C-MBS-REQ
14.2.10.3.2.1 C-MBS-REQ (Operation_Type = Create)
14.2.10.3.2.1.1 Function
14.2.10.3.2.1.2 Semantics of the service primitive:
14.2.10.3.2.1.3 When generated
14.2.10.3.2.1.4 Effect of receipt
14.2.10.3.2.2 C-MBS-REQ (Operation_Type = Delete)
14.2.10.3.2.2.1 Function
1976 14.2.10.3.2.2.2 Semantics of the service primitive:
14.2.10.3.2.2.3 When generated
14.2.10.3.2.2.4 Effect of receipt
14.2.10.3.3 C-MBS-RSP
14.2.10.3.3.1 C-MBS-RSP (Operation_Type = Create)
14.2.10.3.3.1.1 Function
14.2.10.3.3.1.2 Semantics of the service primitive:
1977 14.2.10.3.3.1.2.1 When generated
14.2.10.3.3.1.3 Effect of receipt
14.2.10.3.3.2 C-MBS-RSP (Operation_Type = Delete)
14.2.10.3.3.2.1 Function
14.2.10.3.3.2.2 Semantics of the service primitive:
14.2.10.3.3.2.3 When generated
14.2.10.3.3.2.4 Effect of receipt
1978 14.2.11 LBS Management
14.2.11.1 C-LBS-REQ
14.2.11.1.1 Function
14.2.11.1.2 Semantics of the service primitive:
1979 14.2.11.1.3 When generated
14.2.11.1.4 Effect of receipt
14.2.11.2 C-LBS-ACK
14.2.11.2.1 Function
14.2.11.2.2 Semantics of the service primitive
14.2.11.2.3 When generated
14.2.11.2.4 Effect of receipt
1980 14.2.11.3 C-LBS-RSP
14.2.11.3.1 Function
14.2.11.3.2 Semantics of the service primitive:
14.2.11.3.3 When generated
14.2.11.3.4 Effect of receipt
1983 Annex A (informative) Bibliography
1987 Annex B (informative) Supporting material for frequencies below 11 GHz
1995 Annex C (informative) Example MAC common part sublayer service definition
2007 Annex D (informative) Message sequence charts (MSCs)
2017 Annex E (informative) HO block diagrams
2023 Annex F (informative) Test vectors
2045 Annex G (informative) LDPC direct encoding
2049 Annex H (informative) Definitions of wmanPriMib
2057 Annex I (informative) Alternative variation of replay protection for management messages in limited mobility environment
2059 Annex J (informative) Handover, Ranging, and MIH procedures
2067 Annex K (informative) U-TDOA measurement
2073 Annex L (informative) Example Encapsulation of an IEEE 802.16 entity
2075 Annex M (informative) Network Control and Management System (NCMS)
2077 Annex N (informative) Processing of CMAC_KEY_COUNT by the authenticator
2079 Annex O (informative) PAPR for given preamble modulation index

Related products

IEEE 802.16-2009
$237.08