Shopping Cart

No products in the cart.

IEEE 802.16q 2015

$61.75

IEEE Standard for Air Interface for Broadband Wireless Access Systems– Amendment 3: Multi-tier Networks

Published By Publication Date Number of Pages
IEEE 2015 117
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Amendment Standard – Active. MAC/PHY protocol enhancements for cooperation among base stations in multi-tier networks to enhance interference mitigation, mobility management, and base station power management are specified in this amendment. Enhanced base stations shall support legacy mobile stations. PHY changes to any mobile stations are out of scope. In addition, these protocol enhancements include management messaging between base stations, and between base stations and mobile stations.

PDF Catalog

PDF Pages PDF Title
11 1. Overview
1.9 Support for Multi-tier Networks
12 2. Normative references
13 3. Definitions
14 4. Abbreviations and acronyms
15 6. MAC common part sublayer
6.3.2 MAC PDU formats
6.3.2.3 MAC management messages
6.3.2.3.5 RNG-REQ (ranging request) message
6.3.2.3.6 RNG-RSP (ranging response) message
16 6.3.2.3.23 SBC-REQ (SS and RS basic capability request) message
6.3.2.3.24 SBC-RSP (SS and RS basic capability response) message
6.3.2.3.42 MOB_NBR-ADV (neighbor advertisement) message
6.3.2.3.43 MOB_SCN-REQ (scanning interval allocation request) message
6.3.2.3.44 MOB_SCN-RSP (scanning interval allocation response) message
17 6.3.2.3.45 MOB_SCN-REP (scanning result report) message
6.3.2.3.103 IM_CT-REQ (IM Multi-BS CT request) message
22 6.3.2.3.104 IM_CT-RSP (IM Multi-BS CT response) message
25 6.3.2.3.105 IM_CT-CH-REQ (IM Multi-BS CT PHY Channel Measurement Request) message
26 6.3.2.3.106 IM-CT-CH-RSP (IM Multi-BS CT PHY Channel Measurement Response) message
28 10. Parameters and constants
29 11. TLV encodings
11.1 Common encodings
11.1.19 CSGID
11.3 UCD management message encodings
11.3.1 UCD channel encodings
30 11.4.1 DCD management encodings
33 11.8 SBC-REQ/RSP management message encodings
34 11.8.25 Multi-BS CT support
11.18 MOB_NBR-ADV management message encodings
11.18.3 Neighbor FA information
11.19 MOB_SCN-REP management message encodings
35 11.19.3 Neighbor request
11.19.4 Scanning result
36 11.20 MOB_SCN-REQ/RSP message encodings
11.20.4 Recommended SBS information
37 11.33 IM-CT-CH-REQ management encodings
38 11.34 IM-CT-CH-RSP management encodings
40 14. Management interface and procedures
14.1 Service primitive template
14.1.1 Universal naming schema for SAP service primitive
41 14.1.2 SAP service primitive object format
14.1.2.1 M-SAP/C-SAP operation service primitive
42 14.1.2.2 M-SAP/C-SAP notification service primitive
43 14.1.3 SAP service primitive flow diagram template
44 14.2 Management and control functions
14.2.12 SBS power management
45 14.2.12.1 M-BPM-REQ
46 14.2.12.1.1 M-BPM-REQ (Action_Type = Duty-cycle mode)
14.2.12.1.1.1 Function
14.2.12.1.1.2 Semantics
14.2.12.1.1.3 When generated
47 14.2.12.1.1.4 Effect of receipt
14.2.12.1.2 M-BPM-REQ (Action_Type = Standby mode)
14.2.12.1.2.1 Function
14.2.12.1.2.2 Semantics
48 14.2.12.1.2.3 When generated
14.2.12.1.2.4 Effect of receipt
14.2.12.2 M-BPM-RSP
14.2.12.2.1 M-BPM-RSP (Action_Type = Duty-cycle mode)
14.2.12.2.1.1 Function
14.2.12.2.1.2 Semantics
49 14.2.12.2.1.3 When generated
14.2.12.2.1.4 Effect of receipt
14.2.12.2.2 M-BPM-RSP (Action_Type = Standby mode)
14.2.12.2.2.1 Function
50 14.2.12.2.2.2 Semantics
14.2.12.2.2.3 When generated
14.2.12.2.2.4 Effect of receipt
14.2.13 Interference management
52 14.2.13.1 C-IM-REQ
14.2.13.1.1 C-IM-REQ (Action_Type = IM_RM_Configuration)
14.2.13.1.1.1 Function
14.2.13.1.1.2 Semantics
55 14.2.13.1.1.3 When generated
14.2.13.1.1.4 Effect of receipt
14.2.13.1.2 C-IM-REQ (Action_Type = IM_CT_Configuration)
14.2.13.1.2.1 Function
14.2.13.1.2.2 Semantics
59 14.2.13.1.2.3 When generated
14.2.13.1.2.4 Effect of receipt
60 14.2.13.2 C-IM-RSP
14.2.13.2.1 C-IM-RSP (Action_Type = IM_RM_Configuration)
14.2.13.2.1.1 Function
14.2.13.2.1.2 Semantics
63 14.2.13.2.1.3 When generated
14.2.13.2.1.4 Effect of receipt
14.2.13.2.2 C-IM-RSP (Action_Type = IM_CT_Configuration)
14.2.13.2.2.1 Function
14.2.13.2.2.2 Semantics
66 14.2.13.2.2.3 When generated
14.2.13.2.2.4 Effect of receipt
14.2.13.3 C-IM-IND
14.2.13.3.1 C-IM-IND (Event_Type = IM_RM_Report)
14.2.13.3.1.1 Function
14.2.13.3.1.2 Semantics
69 14.2.13.3.1.3 When generated
14.2.13.3.1.4 Effect of receipt
14.2.13.3.2 C-IM-IND (Event_Type = IM_CT_Report)
14.2.13.3.2.1 Function
14.2.13.3.2.2 Semantics
71 14.2.13.3.2.3 When generated
14.2.13.3.2.4 Effect of receipt
14.2.13.3.3 C-IM-IND (Event_Type = IM_CT_Indication)
14.2.13.3.3.1 Function
14.2.13.3.3.2 Semantics
72 14.2.13.3.3.3 When generated
14.2.13.3.3.4 Effect of receipt
73 17. Support for Multi-tier Networks
17.1 General
17.1.1 SBS subscription types
17.1.2 SBS state diagram
74 17.1.3 Closed subscription group identifier (CSGID)
17.1.3.1 CSG white list
17.1.4 SBS initialization and network exit
17.1.4.1 SBS initialization
75 17.1.4.2 SBS network exit
17.1.5 Network synchronization
17.1.6 Network entry
17.1.6.1 MS network entry with SBS
17.1.6.2 SBS reselection by the MS
76 17.2 Mobility management
17.2.1 Handover (HO)
17.2.1.1 Network topology acquisition
17.2.1.1.1 Network topology advertisement
17.2.1.1.2 MS scanning neighbor SBSs
77 17.2.1.2 HO decision
17.2.2 Idle mode
17.3 Interference management
17.3.1 Resource Management
78 17.3.1.1 Fractional Frequency Reuse (FFR)
17.3.1.1.1 DL FFR
17.3.1.1.2 UL FFR
79 17.3.1.2 Time-Division Multiplexed Resource Scheduling
80 17.3.1.3 Trigger Conditions
81 17.3.2 Multi-BS cooperative transmission
17.3.2.1 DL Multi-BS cooperative transmission
82 17.3.2.1.1 Multi-BS CT decision and initiation
83 17.3.2.1.2 Multi-BS CT set management
17.3.2.1.3 Multi-BS CT Anchor BS management
17.3.2.1.4 STC encoding/decoding for Multi-BS CT
84 17.3.2.1.5 Multi-BS diversity
17.3.2.1.6 DL single-BS precoding with multi-BS coordination
85 17.3.2.1.7 DL multi-BS joint processing
86 17.3.2.1.8 Channel feedback for closed-loop transmit precoding
17.3.2.1.8.1 Sounding-based feedback
17.3.2.1.8.2 MIMO-coefficient-based feedback
87 17.3.2.1.8.3 Codebook-based feedback
17.3.2.1.9 Channel quality measurement and report
17.3.2.1.9.1 MIMO midamble measurement for Multi-BS CT
88 17.3.2.1.9.2 Sounding based estimation for Multi-BS CT
17.3.2.1.10 Trigger conditions
89 17.3.2.2 UL Multi-BS MIMO
17.3.2.2.1 UL multi-BS joint processing
17.3.2.2.2 Trigger conditions
90 17.4 SBS power management
17.4.1 General Description
17.4.2 Duty-cycle Mode
92 17.4.2.1 Duty-cycle pattern
17.4.3 Standby Mode
17.4.3.1 Standby mode initiation
93 17.4.3.2 Standby mode termination
17.4.4 Cooperation of Base Stations for Power Management
IEEE 802.16q 2015
$61.75