IEEE 802.1Q-2018
$272.92
IEEE Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks (Superseded Redline)
Published By | Publication Date | Number of Pages |
IEEE | 2018 |
Revision Standard – Superseded. This standard specifies how the Media Access Control (MAC) Service is supported by Bridged Networks, the principles of operation of those networks, and the operation of MAC Bridges and VLAN Bridges, including management, protocols, and algorithms. Supersedes 802.1Q-2014. IEEE 802.1Qcd-2015, IEEE 802.1Qca-2015,IEEE 802.1Q-2014_Cor-1-2015, IEEE 802.1Qbv-2015, IEEE 802.1Qbu-2016, IEEE 802-1Qbz-2016, IEEE 802.1Qci-2017 and IEEE 802.1Qch-2017. (The PDF of this standard is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page)
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | IEEE Std 802.1Q™-2018 Front cover |
2 | Title page |
4 | Important Notices and Disclaimers Concerning IEEE Standards Documents |
7 | Participants |
9 | Historical participants |
16 | Introduction |
18 | Contents |
50 | Figures |
57 | Tables |
62 | 1. Overview 1.1 Scope 1.2 Purpose |
63 | 1.3 Introduction |
70 | 2. Normative references |
74 | 3. Definitions |
96 | 4. Abbreviations |
102 | 5. Conformance 5.1 Requirements terminology 5.2 Conformant components and equipment |
103 | 5.3 Protocol Implementation Conformance Statement (PICS) 5.4 VLAN Bridge component requirements |
104 | 5.4.1 VLAN Bridge component options |
109 | 5.4.2 Multiple VLAN Registration Protocol (MVRP) requirements 5.4.3 VLAN Bridge requirements for congestion notification |
110 | 5.4.4 Multiple Stream Registration Protocol (MSRP) requirements 5.4.5 Shortest Path Bridging (SPB) operation (optional) |
111 | 5.4.6 Path Control and Reservation (PCR) (optional) |
112 | 5.5 C-VLAN component conformance 5.5.1 C-VLAN component options 5.6 S-VLAN component conformance |
113 | 5.6.1 S-VLAN component options 5.6.2 S-VLAN component requirements for Provider Backbone Bridge Traffic Engineering (PBB-TE) 5.6.3 S-VLAN component requirements for PBB-TE IPS |
114 | 5.6.4 S-VLAN component requirements for ECMP with flow filtering 5.7 I-component conformance 5.7.1 I-component options 5.8 B-component conformance |
115 | 5.8.1 B-component options 5.8.2 B-component requirements for PBB-TE 5.8.3 B-component requirements for PBB-TE IPS |
116 | 5.8.4 B-component requirements for ECMP with flow filtering 5.9 C-VLAN Bridge conformance 5.9.1 C-VLAN Bridge options 5.10 Provider Bridge conformance 5.10.1 S-VLAN Bridge conformance |
117 | 5.10.2 Provider Edge Bridge conformance 5.11 System requirements for Priority-based Flow Control (PFC) 5.12 Backbone Edge Bridge (BEB) conformance |
118 | 5.12.1 BEB requirements for PBB-TE 5.13 MAC Bridge component requirements 5.13.1 MAC Bridge component options |
119 | 5.14 MAC Bridge conformance 5.14.1 MAC Bridge options 5.15 TPMR component conformance |
120 | 5.15.1 TPMR component options 5.16 TPMR conformance 5.16.1 TPMR options 5.17 T-component conformance |
121 | 5.17.1 T-component options 5.18 End station requirements for MMRP, MVRP, and MSRP 5.18.1 MMRP requirements and options |
122 | 5.18.2 MVRP requirements and options 5.18.3 MSRP requirements and options |
123 | 5.19 VLAN-aware end station requirements for CFM 5.20 End station requirements—FQTSS |
124 | 5.21 End station requirements for congestion notification 5.22 MAC-specific bridging methods 5.23 EVB Bridge requirements |
125 | 5.24 EVB station requirements |
126 | 5.24.1 Edge relay (ER) requirements |
127 | 5.25 End station requirements—enhancements for scheduled traffic 5.26 End station requirements—enhancements for frame preemption |
128 | 5.27 End-station requirements—PSFP 5.28 End station requirements—Cyclic queuing and forwarding |
129 | 6. Support of the MAC Service |
130 | 6.1 Basic architectural concepts and terms 6.2 Provision of the MAC Service |
131 | 6.2.1 Point-to-point, multipoint-to-multipoint, and rooted-multipoint connectivity 6.3 Support of the MAC Service |
132 | 6.4 Preservation of the MAC Service 6.5 Quality of service (QoS) maintenance 6.5.1 Service availability |
133 | 6.5.2 Frame loss 6.5.3 Frame misordering |
134 | 6.5.4 Frame duplication |
135 | 6.5.5 Transit delay |
136 | 6.5.6 Frame lifetime 6.5.7 Undetected frame error rate 6.5.8 Maximum Service Data Unit Size 6.5.9 Priority |
137 | 6.5.10 Throughput |
138 | 6.6 Internal Sublayer Service (ISS) 6.7 Support of the ISS by specific MAC procedures 6.7.1 Support of the ISS by IEEE Std 802.3 (Ethernet) 6.7.2 Frame preemption |
139 | 6.8 Enhanced Internal Sublayer Service (EISS) 6.8.1 Service primitives |
140 | 6.8.2 Status parameters 6.8.3 Point-to-point parameters 6.8.4 Control primitives and parameters |
141 | 6.9 Support of the EISS |
142 | 6.9.1 Data indications |
143 | 6.9.2 Data requests 6.9.3 Priority Code Point encoding |
145 | 6.9.4 Regenerating priority |
146 | 6.10 Support of the ISS/EISS by PIPs |
148 | 6.10.1 Data indications |
149 | 6.10.2 Data requests 6.10.3 Priority Code Point encoding |
150 | 6.11 Support of the EISS by CBPs |
151 | 6.11.1 Data indications |
152 | 6.11.2 Data requests |
153 | 6.11.3 Priority Code Point decoding 6.11.4 Regenerating priority 6.12 Protocol VLAN classification |
155 | 6.12.1 Protocol Templates 6.12.2 Protocol Group Identifiers 6.12.3 Protocol Group Database |
156 | 6.13 Support of the ISS for attachment to a PBN |
157 | 6.13.1 Data requests |
158 | 6.13.2 Data indications 6.14 Support of the ISS within a system 6.15 Support of the ISS by additional technologies |
159 | 6.16 Filtering services in Bridged Networks 6.16.1 Purpose(s) of filtering service provision 6.16.2 Goals of filtering service provision |
160 | 6.16.3 Users of filtering services 6.16.4 Basis of service 6.16.5 Categories of service 6.16.6 Service configuration |
161 | 6.16.7 Service definition for Extended Filtering Services |
162 | 6.17 EISS Multiplex Entity |
163 | 6.18 Backbone Service Instance Multiplex Entity |
164 | 6.18.1 Demultiplexing direction |
165 | 6.18.2 Multiplexing direction |
166 | 6.18.3 Priority Code Point encoding 6.18.4 Status parameters 6.19 TESI Multiplex Entity |
167 | 6.20 Support of the ISS with signaled priority |
168 | 6.20.1 Data indications 6.20.2 Data requests 6.21 Infrastructure Segment Multiplex Entity |
170 | 6.22 PDU and protocol discrimination and media |
171 | 7. Principles of Virtual Bridged Network operation 7.1 Network overview |
172 | 7.2 Use of VLANs 7.3 Active topology |
173 | 7.4 VLAN topology |
174 | 7.5 Locating end stations |
175 | 7.6 Ingress, forwarding, and egress rules |
176 | 8. Principles of Bridge operation 8.1 Bridge operation 8.1.1 Relay |
177 | 8.1.2 Filtering and relaying information 8.1.3 Duplicate frame prevention 8.1.4 Traffic segregation |
178 | 8.1.5 Traffic reduction 8.1.6 Traffic expediting 8.1.7 Conversion of frame formats |
179 | 8.2 Bridge architecture |
181 | 8.3 Model of operation |
185 | 8.4 Active topologies, learning, and forwarding |
186 | 8.5 Bridge Port Transmit and Receive 8.5.1 Bridge Port connectivity |
187 | 8.5.2 TPMR Port connectivity |
188 | 8.5.3 Support of Higher Layer Entities 8.6 The Forwarding Process |
189 | 8.6.1 Active topology enforcement |
191 | 8.6.2 Ingress filtering 8.6.3 Frame filtering |
194 | 8.6.4 Egress filtering 8.6.5 Flow classification and metering |
198 | 8.6.6 Queuing frames |
200 | 8.6.7 Queue management 8.6.8 Transmission selection |
206 | 8.6.9 Scheduled traffic state machines |
214 | 8.6.10 Stream gate control state machines |
216 | 8.7 The Learning Process 8.7.1 Default filtering utility criteria |
217 | 8.7.2 Enhanced filtering utility criteria 8.7.3 Ageing of Dynamic Filtering Entries |
218 | 8.8 The Filtering Database (FDB) |
221 | 8.8.1 Static Filtering Entries |
222 | 8.8.2 Static VLAN Registration Entries 8.8.3 Dynamic Filtering Entries |
223 | 8.8.4 MAC Address Registration Entries |
224 | 8.8.5 Dynamic VLAN Registration Entries 8.8.6 Default Group filtering behavior |
225 | 8.8.7 Dynamic Reservation Entries |
226 | 8.8.8 Allocation of VIDs to FIDs 8.8.9 Querying the FDB |
230 | 8.8.10 Determination of the member set for a VID |
231 | 8.8.11 Permanent Database 8.8.12 Connection_Identifier 8.9 MST, SPB, and ESP configuration information |
232 | 8.9.1 MST Configuration Table 8.9.2 MST configuration identification |
233 | 8.9.3 FID to MSTI Allocation Table 8.9.4 SPT Configuration Identification |
234 | 8.10 Spanning Tree Protocol Entity 8.11 MRP entities 8.12 Bridge Management Entity 8.13 Addressing 8.13.1 End stations |
235 | 8.13.2 Bridge Ports 8.13.3 Use of LLC by Spanning Tree Protocol Entities 8.13.4 Reserved MAC addresses |
236 | 8.13.5 Group MAC addresses for spanning tree entity |
238 | 8.13.6 Group MAC addresses for MRP Applications 8.13.7 Bridge Management Entities 8.13.8 Unique identification of a Bridge |
239 | 8.13.9 Points of attachment and connectivity for Higher Layer Entities |
242 | 8.13.10 VLAN attachment and connectivity for Higher Layer Entities |
243 | 8.13.11 CFM entities |
245 | 9. Tagged frame format 9.1 Purpose of tagging 9.2 Representation and encoding of tag fields |
246 | 9.3 Tag format 9.4 TPID formats 9.5 Tag Protocol identification |
247 | 9.6 VLAN Tag Control Information (TCI) |
248 | 9.7 Backbone Service Instance Tag Control Information (I-TAG TCI) |
250 | 10. Multiple Registration Protocol (MRP) and Multiple MAC Registration Protocol (MMRP) 10.1 MRP overview |
253 | 10.2 MRP architecture |
254 | 10.3 MRP Attribute Propagation (MAP) |
255 | 10.3.1 MAP Context |
256 | 10.4 Requirements to be met by MRP |
257 | 10.5 Requirements for interoperability between MRP Participants |
258 | 10.6 Protocol operation |
262 | 10.7 Protocol specification |
263 | 10.7.1 Notational conventions and abbreviations |
265 | 10.7.2 Registrar Administrative Controls 10.7.3 Applicant Administrative Controls 10.7.4 Protocol timers |
266 | 10.7.5 Protocol event definitions |
269 | 10.7.6 Protocol Action definitions |
271 | 10.7.7 Applicant state machine |
272 | 10.7.8 Registrar state machine 10.7.9 LeaveAll state machine |
273 | 10.7.10 PeriodicTransmission state machine 10.7.11 Timer values |
274 | 10.7.12 Operational reporting and statistics 10.7.13 Interoperability considerations |
275 | 10.8 Structure and encoding of Multiple Registration Protocol Data Units (MRPDUs) 10.8.1 Structure |
277 | 10.8.2 Encoding of MRPDU parameters |
280 | 10.8.3 Packing and parsing MRPDUs |
282 | 10.9 Multiple MAC Registration Protocol (MMRP)—Purpose |
283 | 10.10 Model of operation |
284 | 10.10.1 Propagation of Group Membership information |
285 | 10.10.2 Propagation of Group service requirement information 10.10.3 Source pruning 10.10.4 Use of Group service requirement registration by end stations 10.11 Default Group filtering behavior and MMRP propagation |
287 | 10.12 Definition of the MMRP application 10.12.1 Definition of MRP elements |
289 | 10.12.2 Provision and support of Extended Filtering Services |
291 | 10.12.3 Use of “new” declaration capability 10.12.4 Attribute value support requirements |
292 | 11. VLAN topology management 11.1 Static and dynamic VLAN configuration |
293 | 11.2 Multiple VLAN Registration Protocol (MVRP) 11.2.1 MVRP overview |
295 | 11.2.2 VLAN registration service definition |
296 | 11.2.3 Definition of the MVRP application |
299 | 11.2.4 VID translation table 11.2.5 Use of “new” declaration capability 11.2.6 New-Only Participant and Registrar Administrative Controls 11.2.7 Attribute value support requirements |
300 | 12. Bridge management 12.1 Management functions 12.1.1 Configuration Management |
301 | 12.1.2 Fault Management 12.1.3 Performance Management 12.1.4 Security Management 12.1.5 Accounting Management 12.2 VLAN Bridge objects |
302 | 12.3 Data types |
303 | 12.4 Bridge Management Entity 12.4.1 Bridge Configuration |
306 | 12.4.2 Port configuration |
308 | 12.5 MAC entities 12.5.1 ISS Port Number table managed object (optional) 12.6 Forwarding process 12.6.1 The Port Counters |
309 | 12.6.2 Priority handling |
317 | 12.6.3 Traffic Class Table |
318 | 12.7 Filtering Database (FDB) 12.7.1 The Filtering Database object |
319 | 12.7.2 A Static Filtering Entry object 12.7.3 A Dynamic Filtering Entry object 12.7.4 A MAC Address Registration Entry object |
320 | 12.7.5 A VLAN Registration Entry object 12.7.6 Permanent Database object |
321 | 12.7.7 General FDB operations |
322 | 12.8 Bridge Protocol Entity |
323 | 12.8.1 The Protocol Entity |
326 | 12.8.2 Bridge Port |
330 | 12.9 MRP Entities 12.9.1 The MRP Timer object |
331 | 12.9.2 The MRP Attribute Type object |
332 | 12.9.3 Periodic state machine objects 12.10 Bridge VLAN managed objects |
333 | 12.10.1 Bridge VLAN Configuration managed object |
338 | 12.10.2 VLAN Configuration managed object |
339 | 12.10.3 The VID to FID allocation managed object |
342 | 12.11 MMRP entities 12.11.1 MMRP Configuration managed object |
343 | 12.12 MST configuration entities 12.12.1 The MSTI List |
345 | 12.12.2 The FID to MSTID Allocation Table |
346 | 12.12.3 The MST Configuration Table |
347 | 12.13 Provider Bridge management |
349 | 12.13.1 Provider Bridge Port Type managed object |
350 | 12.13.2 Customer Edge Port Configuration managed object |
353 | 12.13.3 Remote Customer Access Port Configuration managed object |
355 | 12.14 CFM entities |
356 | 12.14.1 Maintenance Domain list managed object |
357 | 12.14.2 CFM Stack managed object |
358 | 12.14.3 Default MD Level managed object |
359 | 12.14.4 Configuration Error List managed object 12.14.5 Maintenance Domain managed object |
362 | 12.14.6 Maintenance Association managed object |
365 | 12.14.7 Maintenance association Endpoint managed object |
372 | 12.15 Backbone Core Bridge (BCB) management 12.16 Backbone Edge Bridge (BEB) management |
373 | 12.16.1 BEB configuration managed object |
377 | 12.16.2 BEB/PB/VLAN Bridge Port configuration managed object |
378 | 12.16.3 VIP configuration managed object |
379 | 12.16.4 PIP configuration managed object |
385 | 12.16.5 CBP Configuration managed object |
388 | 12.17 DDCFM entities 12.17.1 DDCFM Stack managed object |
389 | 12.17.2 Reflection Responder managed object |
392 | 12.17.3 RFM Receiver managed object |
393 | 12.17.4 Decapsulator Responder managed object |
396 | 12.17.5 SFM Originator managed object |
399 | 12.18 PBB-TE Protection Switching managed objects 12.18.1 TE protection group list managed object |
400 | 12.18.2 TE protection group managed object |
402 | 12.19 TPMR managed objects |
403 | 12.19.1 TPMR management entity |
405 | 12.19.2 MAC and PHY entities 12.19.3 Forwarding Process |
410 | 12.19.4 MAC Status Propagation Entity (MSPE) |
412 | 12.20 Management entities for FQTSS 12.20.1 The Bandwidth Availability Parameter Table |
413 | 12.20.2 The Transmission Selection Algorithm Table 12.20.3 The Priority Regeneration Override Table 12.21 Congestion Notification managed objects |
414 | 12.21.1 CN component managed object 12.21.2 CN component priority managed object |
415 | 12.21.3 CN Port priority managed object |
416 | 12.21.4 Congestion Point managed object |
417 | 12.21.5 Reaction Point port priority managed object 12.21.6 Reaction Point group managed object |
418 | 12.22 Stream Reservation Protocol (SRP) entities 12.22.1 SRP Bridge Base Table 12.22.2 SRP Bridge Port Table |
419 | 12.22.3 SRP Latency Parameter Table 12.22.4 SRP Stream Table |
420 | 12.22.5 SRP Reservations Table 12.23 Priority-based Flow Control objects |
421 | 12.24 1:1 PBB-TE IPS managed objects 12.24.1 IPG list managed object |
423 | 12.24.2 IPG managed object |
425 | 12.25 Shortest Path Bridging managed objects |
426 | 12.25.1 The SPB System managed object |
429 | 12.25.2 The SPB MTID Static managed object |
430 | 12.25.3 The SPB Topology Instance Dynamic managed object |
431 | 12.25.4 The SPB ECT Static Entry managed object |
432 | 12.25.5 The SPB ECT Dynamic Entry managed object |
433 | 12.25.6 The SPB Adjacency Static Entry managed object |
434 | 12.25.7 The SPB Adjacency Dynamic Entry managed object |
435 | 12.25.8 The SPBM BSI Static Entry managed object |
436 | 12.25.9 The SPB Topology Node Table managed object |
437 | 12.25.10 The SPB Topology ECT Table managed object 12.25.11 The SPB Topology Edge Table managed object |
438 | 12.25.12 The SPBM Topology Service Table managed object |
439 | 12.25.13 The SPBV Topology Service Table managed object |
440 | 12.25.14 The ECMP ECT Static Entry managed object |
441 | 12.26 Edge Virtual Bridging (EVB) management |
445 | 12.26.1 EVB system base table |
446 | 12.26.2 SBP table entry |
447 | 12.26.3 VSI table entry |
449 | 12.26.4 S-channel configuration and management |
451 | 12.26.5 ER management |
452 | 12.27 Edge Control Protocol (ECP) management 12.27.1 ECP table entry 12.28 Path Control and Reservation (PCR) management |
453 | 12.28.1 The PCR ECT Static Entry managed object |
456 | 12.28.2 The PCR Topology ECT Table managed object 12.29 Managed objects for scheduled traffic 12.29.1 The Gate Parameter Table |
459 | 12.29.2 Timing points for scheduled traffic |
460 | 12.30 Managed objects for frame preemption 12.30.1 Frame Preemption Parameter table |
461 | 12.31 Managed objects for per-stream filtering and policing 12.31.1 The Stream Parameter Table |
462 | 12.31.2 The Stream Filter Instance Table |
464 | 12.31.3 The Stream Gate Instance Table |
467 | 12.31.4 The Flow Meter Instance Table |
468 | 13. Spanning tree protocols |
469 | 13.1 Protocol design requirements |
470 | 13.2 Protocol support requirements 13.2.1 MSTP support requirements 13.2.2 SPB support requirements |
471 | 13.3 Protocol design goals 13.4 RSTP overview |
472 | 13.4.1 Computation of the active topology |
473 | 13.4.2 Example topologies |
476 | 13.5 MSTP overview |
477 | 13.5.1 Example topologies |
480 | 13.5.2 Relationship of MSTP to RSTP 13.5.3 Modeling an MST or SPT Region as a single Bridge |
481 | 13.6 SPB overview |
482 | 13.7 Compatibility and interoperability 13.7.1 Designated Port selection 13.7.2 Force Protocol Version |
483 | 13.8 MST Configuration Identifier (MCID) |
484 | 13.9 Spanning tree priority vectors |
486 | 13.10 CIST Priority Vector calculations |
488 | 13.11 MST Priority Vector calculations |
490 | 13.12 Port Role assignments |
491 | 13.13 Stable connectivity |
492 | 13.14 Communicating spanning tree information |
493 | 13.15 Changing spanning tree information |
494 | 13.16 Changing Port States with RSTP or MSTP |
495 | 13.16.1 Subtree connectivity and priority vectors 13.16.2 Root Port transition to Forwarding 13.16.3 Designated Port transition to Forwarding |
497 | 13.16.4 Master Port transition to Forwarding |
499 | 13.17 Changing Port States with SPB |
501 | 13.17.1 Agreement Digest |
502 | 13.18 Managing spanning tree topologies |
503 | 13.19 Updating learned station location information |
505 | 13.20 Managing reconfiguration |
506 | 13.21 Partial and disputed connectivity 13.22 In-service upgrades |
508 | 13.23 Fragile Bridges 13.24 Spanning tree protocol state machines |
510 | 13.25 State machine timers |
511 | 13.25.1 edgeDelayWhile 13.25.2 fdWhile 13.25.3 helloWhen 13.25.4 mdelayWhile 13.25.5 rbWhile 13.25.6 rcvdInfoWhile |
512 | 13.25.7 rrWhile 13.25.8 tcDetected 13.25.9 tcWhile 13.25.10 pseudoInfoHelloWhen 13.26 Per Bridge variables |
513 | 13.26.1 agreementDigest 13.26.2 BridgeIdentifier 13.26.3 BridgePriority 13.26.4 BridgeTimes |
514 | 13.26.5 ForceProtocolVersion 13.26.6 MigrateTime 13.26.7 MstConfigId 13.26.8 AuxMstConfigId 13.26.9 rootPortId 13.26.10 rootPriority 13.26.11 rootTimes 13.26.12 TxHoldCount 13.27 Per port variables |
517 | 13.27.1 AdminEdge 13.27.2 ageingTime 13.27.3 agree 13.27.4 agreed 13.27.5 agreedAbove 13.27.6 agreedDigest 13.27.7 agreedDigestValid 13.27.8 agreeDigest 13.27.9 agreeDigestValid |
518 | 13.27.10 agreedMisorder 13.27.11 agreedN 13.27.12 agreedND 13.27.13 agreedPriority 13.27.14 agreedTopology 13.27.15 agreementOutstanding 13.27.16 agreeN 13.27.17 agreeND 13.27.18 AutoEdge |
519 | 13.27.19 AutoIsolate 13.27.20 designatedPriority 13.27.21 designatedTimes 13.27.22 disputed 13.27.23 enableBPDUrx 13.27.24 enableBPDUtx 13.27.25 ExternalPortPathCost 13.27.26 isL2gp |
520 | 13.27.27 isolate 13.27.28 fdbFlush 13.27.29 forward 13.27.30 forwarding 13.27.31 infoInternal 13.27.32 infoIs 13.27.33 InternalPortPathCost |
521 | 13.27.34 learn 13.27.35 learning 13.27.36 master 13.27.37 mastered 13.27.38 mcheck 13.27.39 msgPriority 13.27.40 msgTimes |
522 | 13.27.41 neighbourPriority 13.27.42 newInfo 13.27.43 newInfoMsti 13.27.44 operEdge 13.27.45 portEnabled 13.27.46 portId 13.27.47 portPriority |
523 | 13.27.48 portTimes 13.27.49 proposed 13.27.50 proposing 13.27.51 pseudoRootId 13.27.52 rcvdBPDU 13.27.53 rcvdInfo 13.27.54 rcvdInternal 13.27.55 rcvdMsg 13.27.56 rcvdRSTP 13.27.57 rcvdSTP 13.27.58 rcvdTc 13.27.59 rcvdTcAck |
524 | 13.27.60 rcvdTcn 13.27.61 reRoot 13.27.62 reselect 13.27.63 restrictedDomainRole 13.27.64 restrictedRole 13.27.65 restrictedTcn 13.27.66 role 13.27.67 selected 13.27.68 selectedRole |
525 | 13.27.69 sendRSTP 13.27.70 sync 13.27.71 synced 13.27.72 tcAck 13.27.73 tcProp 13.27.74 tick 13.27.75 txCount 13.27.76 updtInfo 13.28 State machine conditions and parameters |
526 | 13.28.1 allSptAgree 13.28.2 allSynced 13.28.3 allTransmitReady 13.28.4 BestAgreementPriority 13.28.5 cist 13.28.6 cistRootPort |
527 | 13.28.7 cistDesignatedPort 13.28.8 EdgeDelay 13.28.9 forwardDelay 13.28.10 FwdDelay 13.28.11 HelloTime 13.28.12 MaxAge 13.28.13 msti 13.28.14 mstiDesignatedOrTCpropagatingRootPort 13.28.15 mstiMasterPort 13.28.16 operPointToPoint 13.28.17 rcvdAnyMsg 13.28.18 rcvdCistMsg |
528 | 13.28.19 rcvdMstiMsg 13.28.20 reRooted 13.28.21 rstpVersion 13.28.22 spt 13.28.23 stpVersion 13.28.24 updtCistInfo 13.28.25 updtMstiInfo 13.29 State machine procedures |
529 | 13.29.1 betterorsameInfo(newInfoIs) 13.29.2 clearAllRcvdMsgs() 13.29.3 clearReselectTree() |
530 | 13.29.4 disableForwarding() 13.29.5 disableLearning() 13.29.6 enableForwarding() 13.29.7 enableLearning() 13.29.8 fromSameRegion() 13.29.9 newTcDetected() 13.29.10 newTcWhile() |
531 | 13.29.11 pseudoRcvMsgs() 13.29.12 rcvInfo() |
532 | 13.29.13 rcvMsgs() 13.29.14 rcvAgreements() 13.29.15 recordAgreement() |
533 | 13.29.16 recordDispute() 13.29.17 recordMastered() 13.29.18 recordPriority() 13.29.19 recordProposal() 13.29.20 recordTimes() |
534 | 13.29.21 setReRootTree() 13.29.22 setSelectedTree() 13.29.23 setSyncTree() 13.29.24 setTcFlags() 13.29.25 setTcPropTree() 13.29.26 syncMaster() 13.29.27 txConfig() |
535 | 13.29.28 txRstp() 13.29.29 txTcn() 13.29.30 updtAgreement() |
536 | 13.29.31 updtBPDUVersion() 13.29.32 updtDigest() |
537 | 13.29.33 updtRcvdInfoWhile() |
538 | 13.29.34 updtRolesTree() |
539 | 13.29.35 uptRolesDisabledTree() 13.30 The Port Timers state machine |
540 | 13.31 Port Receive state machine |
541 | 13.32 Port Protocol Migration state machine 13.33 Bridge Detection state machine |
542 | 13.34 Port Transmit state machine |
543 | 13.35 Port Information state machine |
544 | 13.36 Port Role Selection state machine 13.37 Port Role Transitions state machine |
549 | 13.38 Port State Transition state machine |
550 | 13.38.1 Port State transitions for the CIST and MSTIs 13.38.2 Port State transitions for SPTs |
551 | 13.39 Topology Change state machine |
552 | 13.40 Layer 2 Gateway Port Receive state machine 13.41 CEP spanning tree operation 13.41.1 PEP operPointToPointMAC and operEdge |
553 | 13.41.2 updtRolesTree() 13.41.3 setReRootTree(), setSyncTree(), setTcPropTree() 13.41.4 allSynced, reRooted 13.41.5 Configuration parameters |
554 | 13.42 Virtual Instance Port (VIP) spanning tree operation |
555 | 14. Encoding of Bridge Protocol Data Units (BPDUs) 14.1 BPDU Structure 14.1.1 Transmission and representation of octets 14.1.2 Common BPDU fields |
557 | 14.2 Encoding of parameter types 14.2.1 Encoding of Protocol Identifiers 14.2.2 Encoding of Protocol Version Identifiers 14.2.3 Encoding of BPDU types 14.2.4 Encoding of flags 14.2.5 Encoding of Bridge Identifiers |
558 | 14.2.6 Encoding of External Root Path Cost and Internal Root Path Cost 14.2.7 Encoding of Port Identifiers 14.2.8 Encoding of Timer Values 14.2.9 Encoding of Port Role values |
559 | 14.2.10 Encoding of Length Values 14.2.11 Encoding of Hop Counts 14.3 Transmission of BPDUs 14.4 Encoding and decoding of STP Configuration, RST, MST, and SPT BPDUs |
561 | 14.4.1 MSTI Configuration Messages |
562 | 14.5 Validation of received BPDUs |
563 | 14.6 Validation and interoperability |
564 | 15. Support of the MAC Service by PBNs 15.1 Service transparency |
565 | 15.2 Customer service interfaces 15.3 Port-based service interface |
566 | 15.4 C-tagged service interface |
567 | 15.5 S-tagged service interface |
568 | 15.6 Remote customer service interfaces (RCSIs) |
571 | 15.7 Service instance segregation 15.8 Service instance selection and identification |
572 | 15.9 Service priority selection 15.10 Service access protection |
573 | 16. Principles of Provider Bridged Network (PBN) operation 16.1 PBN overview |
574 | 16.2 Provider Bridged Network (PBN) |
577 | 16.3 Service instance connectivity |
578 | 16.4 Service provider learning of customer end station addresses 16.5 Detection of connectivity loops through attached networks |
579 | 16.6 Network management |
580 | 17. Management Information Base (MIB) 17.1 Internet Standard Management Framework 17.2 Structure of the MIB |
581 | 17.2.1 Structure of the IEEE8021-TC-MIB |
583 | 17.2.2 Structure of the IEEE8021-BRIDGE-MIB |
587 | 17.2.3 Structure of the IEEE8021-SPANNING-TREE MIB |
590 | 17.2.4 Structure of the IEEE8021-Q-BRIDGE-MIB |
595 | 17.2.5 Structure of the IEEE8021-PB-MIB |
597 | 17.2.6 Structure of the IEEE8021-MSTP-MIB |
600 | 17.2.7 Structure of the IEEE8021-CFM-MIB |
606 | 17.2.8 Structure of the IEEE8021-PBB-MIB |
608 | 17.2.9 Structure of the IEEE8021-DDCFM-MIBs |
611 | 17.2.10 Structure of the IEEE8021-PBBTE-MIB |
613 | 17.2.11 Structure of the TPMR MIB |
615 | 17.2.12 Structure of the IEEE8021-FQTSS-MIB |
616 | 17.2.13 Structure of the Congestion Notification MIB |
618 | 17.2.14 Structure of the IEEE8021-SRP-MIB |
620 | 17.2.15 Structure of the MVRP extension MIB 17.2.16 Structure of the MIRP MIB |
621 | 17.2.17 Structure of the PFC MIB 17.2.18 Structure of the IEEE80221-TEIPS MIB |
623 | 17.2.19 Structure of the IEEE8021-SPB-MIB |
627 | 17.2.20 Structure of the IEEE8021-EVB-MIB |
631 | 17.2.21 Structure of the IEEE8021-ECMP-MIB |
632 | 17.2.22 Structure of the IEEE8021-ST-MIB |
633 | 17.2.23 Structure of the IEEE8021-Preemption-MIB |
634 | 17.2.24 Structure of the IEEE8021-PSFP-MIB |
637 | 17.3 Relationship to other MIBs 17.3.1 Relationship of the IEEE8021-TC-MIB to other MIB modules 17.3.2 Relationship of the IEEE8021-BRIDGE-MIB to other MIB modules |
640 | 17.3.3 Relationship of the IEEE8021-RSTP MIB to other MIB modules 17.3.4 Relationship of the IEEE8021-Q-BRIDGE-MIB to other MIB modules |
642 | 17.3.5 Relationship of the IEEE8021-PB-BRIDGE MIB to other MIB modules 17.3.6 Relationship of the IEEE8021-MSTP-MIB to other MIB modules 17.3.7 Relationship of the IEEE8021-CFM-MIB to other MIB modules |
643 | 17.3.8 Relationship of the IEEE8021-PBB-MIB to other MIB modules |
644 | 17.3.9 Relationship of the IEEE8021-DDCFM to other MIB modules 17.3.10 Relationship of the IEEE8021-PBBTE-MIB to other MIB modules |
645 | 17.3.11 Relationship of the TPMR MIB to other MIB modules 17.3.12 Relationship of the IEEE8021-FQTSS-MIB to other MIB modules 17.3.13 Relationship of the IEEE802-CN-MIB to other MIB modules |
646 | 17.3.14 Relationship of the IEEE8021-SRP-MIB to other MIB modules 17.3.15 Relationship of the IEEE8021-MVRPX-MIB to other MIB modules 17.3.16 Relationship of the IEEE8021-MIRP-MIB to other MIB modules 17.3.17 Relationship of the PFC MIB to other MIB modules |
647 | 17.3.18 Relationship of the IEEE8021-TEIPS-MIB to other MIB modules 17.3.19 Relationship of the of the IEEE8021-SPB-MIB to other MIB modules 17.3.20 Relationship of the IEEE8021-EVB-MIB to other MIB modules 17.3.21 Relationship of the of the IEEE8021-ECMP-MIB to other MIB modules 17.3.22 Relationship of the PCR MIB to other MIB modules 17.3.23 Relationship of the IEEE8021-ST-MIB to other MIBs |
648 | 17.3.24 Relationship of the IEEE8021-Preemption-MIB to other MIBs 17.3.25 Relationship of IEEE8021-PSFP-MIB to other MIBs 17.4 Security considerations 17.4.1 Security considerations of the IEEE8021-TC-MIB 17.4.2 Security considerations of the IEEE8021-BRIDGE-MIB |
649 | 17.4.3 Security considerations of the IEEE8021-SPANNING-TREE MIB |
650 | 17.4.4 Security considerations of the IEEE8021-Q-BRIDGE-MIB |
651 | 17.4.5 Security considerations of the IEEE8021-PB-MIB 17.4.6 Security considerations of the IEEE8021-MSTP-MIB |
652 | 17.4.7 Security considerations of the IEEE8021-CFM-MIB |
654 | 17.4.8 Security considerations of the IEEE8021-PBB-MIB 17.4.9 Security considerations of the IEEE8021-DDCFM-MIB |
655 | 17.4.10 Security considerations of the IEEE8021-PBBTE-MIB |
656 | 17.4.11 Security considerations of the TPMR MIB 17.4.12 Security considerations of the IEEE8021-FQTSS-MIB |
657 | 17.4.13 Security considerations of the Congestion Notification MIB |
658 | 17.4.14 Security considerations of the IEEE8021-SRP-MIB |
659 | 17.4.15 Security considerations of the IEEE8021-MVRPX-MIB 17.4.16 Security considerations of the IEEE8021-MIRP-MIB |
660 | 17.4.17 Security considerations for the PFC MIB 17.4.18 Security considerations of the IEEE8021-TEIPS-MIB 17.4.19 Security considerations of the IEEE8021-SPB-MIB |
661 | 17.4.20 Security considerations of the IEEE8021-EVB-MIB |
662 | 17.4.21 Security considerations of the IEEE8021-ECMP-MIB |
663 | 17.4.22 Security considerations of the PCR MIB 17.4.23 Security considerations of the IEEE8021-ST-MIB |
664 | 17.4.24 Security considerations of the IEEE8021-Preemption-MIB 17.4.25 Security considerations of the IEEE8021-PSFP-MIB |
666 | 17.5 Dynamic component and Port creation 17.5.1 Overview of the dynamically created Bridge entities |
667 | 17.5.2 Component creation |
668 | 17.5.3 Port creation |
678 | 17.6 MIB operations for service interface configuration 17.6.1 Provisioning PBN service interfaces |
681 | 17.6.2 Provisioning Backbone Bridged Network service interfaces |
687 | 17.7 MIB modules, 17.7.1 Definitions for the IEEE8021-TC-MIB module |
698 | 17.7.2 Definitions for the IEEE8021-BRIDGE-MIB module |
738 | 17.7.3 Definitions for the IEEE8021-SPANNING-TREE-MIB module |
756 | 17.7.4 Definitions for the IEEE8021-Q-BRIDGE-MIB module |
802 | 17.7.5 Definitions for the IEEE8021-PB-MIB module |
820 | 17.7.6 Definitions for the IEEE8021-MSTP-MIB module |
849 | 17.7.7 Definitions for the CFM MIB modules |
932 | 17.7.8 Definitions for the IEEE8021-PBB-MIB module |
955 | 17.7.9 Definitions for the IEEE8021-DDCFM-MIB module |
973 | 17.7.10 Definitions for the IEEE8021-PBBTE-MIB module |
990 | 17.7.11 Definitions for the IEEE8021-TPMR-MIB module |
1004 | 17.7.12 Definitions for the IEEE8021-FQTSS-MIB module |
1015 | 17.7.13 Definitions for the IEEE8021-CN-MIB module |
1051 | 17.7.14 Definitions for the IEEE8021-SRP-MIB module |
1067 | 17.7.15 Definitions for the IEEE8021-MVRPX-MIB module |
1072 | 17.7.16 Definitions for the IEEE8021-MIRP-MIB module |
1078 | 17.7.17 Definitions for the IEEE8021-PFC-MIB module |
1082 | 17.7.18 Definitions for the IEEE8021-TEIPS-V2-MIB module |
1097 | 17.7.19 Definitions for the IEEE8021-SPB-MIB module |
1141 | 17.7.20 Definitions for the IEEE8021-EVB-MIB module |
1170 | 17.7.21 Definitions for the IEEE8021-ECMP-MIB module |
1178 | 17.7.22 Definitions for the IEEE8021-ST-MIB module |
1191 | 17.7.23 Definitions for the IEEE8021-Preemption-MIB module |
1197 | 17.7.24 Definitions for the IEEE8021-PSFP-MIB module |
1221 | 18. Principles of Connectivity Fault Management operation |
1222 | 18.1 Maintenance Domains and DoSAPs |
1224 | 18.2 Service instances and MAs |
1225 | 18.3 Maintenance Domain Levels |
1229 | 19. CFM entity operation 19.1 Maintenance Points (MPs) |
1230 | 19.2 MA Endpoints (MEPs) 19.2.1 MEP identification |
1231 | 19.2.2 MEP functions 19.2.3 MEP architecture |
1233 | 19.2.4 MP Type Demultiplexer 19.2.5 MP Multiplexer 19.2.6 MP Level Demultiplexer 19.2.7 MP OpCode Demultiplexer |
1234 | 19.2.8 MEP Continuity Check Receiver 19.2.9 MEP Continuity Check Initiator |
1235 | 19.2.10 MP Loopback Responder 19.2.11 MEP Loopback Initiator 19.2.12 MEP Linktrace Initiator 19.2.13 MEP LTI SAP 19.2.14 MEP Linktrace SAP 19.2.15 MEP CCM Database 19.2.16 MEP Fault Notification Generator |
1236 | 19.2.17 MEP Decapsulator Responder (DR) 19.2.18 MEP RFM Receiver 19.3 MIP Half Function 19.3.1 MHF identification 19.3.2 MHF functions |
1237 | 19.3.3 MHF architecture 19.3.4 MHF Level Demultiplexer 19.3.5 MHF Type Demultiplexer 19.3.6 MHF OpCode Demultiplexer 19.3.7 MHF Multiplexer 19.3.8 MHF Loopback Responder |
1238 | 19.3.9 MHF Continuity Check Receiver 19.3.10 MIP CCM Database |
1239 | 19.3.11 MHF Linktrace SAP 19.3.12 MHF DR 19.3.13 MHF RFM Receiver 19.4 MP addressing |
1240 | 19.5 Linktrace Output Multiplexer (LOM) 19.6 Linktrace Responder |
1242 | 20. CFM protocols |
1243 | 20.1 Continuity Check protocol |
1245 | 20.1.1 MAC status reporting in the CCM 20.1.2 Defects and Fault Alarms |
1246 | 20.1.3 CCM reception 20.2 Loopback protocol |
1247 | 20.2.1 LBM transmission 20.2.2 LBM reception and LBR transmission |
1248 | 20.2.3 LBR reception 20.3 Linktrace protocol |
1249 | 20.3.1 LTM origination |
1250 | 20.3.2 LTM reception, forwarding, and replying |
1251 | 20.3.3 LTR reception |
1252 | 20.4 CFM state machines 20.5 CFM state machine timers |
1254 | 20.5.1 LTFwhile 20.5.2 CCIwhile 20.5.3 errorCCMwhile 20.5.4 xconCCMwhile 20.5.5 LBIwhile 20.5.6 FNGwhile 20.5.7 mmCCMwhile 20.5.8 mmLocwhile 20.5.9 mmFNGwhile 20.5.10 rMEPwhile |
1255 | 20.6 CFM procedures 20.6.1 CCMtime() 20.7 Maintenance Domain variable 20.7.1 mdLevel 20.8 MA variables 20.8.1 CCMinterval 20.9 MEP variables |
1256 | 20.9.1 MEPactive 20.9.2 enableRmepDefect |
1257 | 20.9.3 MAdefectIndication 20.9.4 allRMEPsDead 20.9.5 lowestAlarmPri 20.9.6 presentRDI 20.9.7 MEPprimaryVID 20.9.8 presentTraffic 20.9.9 presentmmLoc |
1258 | 20.9.10 ISpresentTraffic 20.9.11 ISpresentmmLoc 20.9.12 EpMEP 20.10 MEP Continuity Check Initiator variables 20.10.1 CCIenabled 20.10.2 CCIsentCCMs 20.10.3 MACstatusChanged 20.10.4 Npaths |
1259 | 20.10.5 flowHash[ ] 20.10.6 pathN 20.10.7 CCMcnt 20.11 MEP Continuity Check Initiator procedures 20.11.1 xmitCCM() |
1260 | 20.12 MEP Continuity Check Initiator state machine |
1261 | 20.13 MHF Continuity Check Receiver variables 20.13.1 MHFrecvdCCM 20.13.2 MHFCCMPDU 20.14 MHF Continuity Check Receiver procedures 20.14.1 MHFprocessCCM() 20.15 MHF Continuity Check Receiver state machine |
1262 | 20.16 MEP Continuity Check Receiver variables 20.16.1 CCMreceivedEqual 20.16.2 CCMequalPDU 20.16.3 CCMreceivedLow 20.16.4 CCMlowPDU 20.16.5 recvdMacAddress 20.16.6 recvdRDI |
1263 | 20.16.7 recvdInterval 20.16.8 recvdPortState 20.16.9 recvdInterfaceStatus 20.16.10 recvdSenderId 20.16.11 recvdFrame 20.16.12 CCMsequenceErrors 20.16.13 rcvdTrafficBit 20.17 MEP Continuity Check Receiver procedures |
1264 | 20.17.1 MEPprocessEqualCCM() 20.17.2 MEPprocessLowCCM() |
1265 | 20.18 MEP Continuity Check Receiver state machine 20.19 Remote MEP variables 20.19.1 rMEPCCMdefect 20.19.2 rMEPlastRDI and rMEPlastRDI[i] |
1266 | 20.19.3 rMEPlastPortState 20.19.4 rMEPlastInterfaceStatus 20.19.5 rMEPlastSenderId 20.19.6 rCCMreceived 20.19.7 rMEPmacAddress 20.19.8 rMEPportStatusDefect 20.19.9 rMEPinterfaceStatusDefect 20.19.10 lastPathN |
1267 | 20.20 Remote MEP state machine |
1268 | 20.21 Remote MEP Error variables 20.21.1 errorCCMreceived 20.21.2 errorCCMlastFailure 20.21.3 errorCCMdefect 20.22 Remote MEP Error state machine |
1269 | 20.23 MEP Cross Connect variables 20.23.1 xconCCMreceived 20.23.2 xconCCMlastFailure 20.23.3 xconCCMdefect 20.24 MEP Cross Connect state machine |
1270 | 20.25 MEP Mismatch variables 20.25.1 mmCCMreceived 20.25.2 mmCCMdefect 20.25.3 mmCCMTime 20.25.4 disableLocdefect 20.25.5 mmLocdefect |
1271 | 20.26 MEP Mismatch state machines |
1272 | 20.27 MP Loopback Responder variables 20.27.1 LBMreceived 20.27.2 LBMPDU 20.28 MP Loopback Responder procedures 20.28.1 ProcessLBM() |
1273 | 20.28.2 xmitLBR() 20.29 MP Loopback Responder state machine |
1274 | 20.30 MEP Loopback Initiator variables 20.30.1 LBMsToSend 20.30.2 nextLBMtransID 20.30.3 expectedLBRtransID 20.30.4 LBIactive 20.30.5 xmitReady 20.30.6 LBRreceived 20.30.7 LBRPDU |
1275 | 20.31 MEP Loopback Initiator transmit procedures 20.31.1 xmitLBM() |
1276 | 20.32 MEP Loopback Initiator transmit state machine 20.33 MEP Loopback Initiator receive procedures 20.33.1 ProcessLBR() |
1277 | 20.34 MEP Loopback Initiator receive state machine 20.35 MEP Fault Notification Generator variables 20.35.1 fngPriority |
1278 | 20.35.2 fngDefect 20.35.3 fngAlarmTime 20.35.4 fngResetTime 20.35.5 someRMEPCCMdefect 20.35.6 someMACstatusDefect 20.35.7 someRDIdefect 20.35.8 highestDefectPri 20.35.9 highestDefect |
1279 | 20.36 MEP Fault Notification Generator procedures 20.36.1 xmitFaultAlarm() 20.37 MEP Fault Notification Generator state machine |
1280 | 20.38 MEP Mismatch Fault Notification Generator variables 20.38.1 mfngAllowed 20.38.2 mmdefectIndication 20.38.3 mfngAlarmTime 20.38.4 mfngResetTime 20.39 MEP Mismatch Fault Notification Generator procedures 20.39.1 xmitFaultAlarm() |
1281 | 20.40 MEP Mismatch Fault Notification Generator state machine 20.41 MEP Linktrace Initiator variables 20.41.1 nextLTMtransID |
1282 | 20.41.2 ltmReplyList |
1284 | 20.42 MEP Linktrace Initiator procedures 20.42.1 xmitLTM() |
1285 | 20.43 MEP Linktrace Initiator receive variables 20.43.1 LTRreceived 20.43.2 LTRPDU 20.44 MEP Linktrace Initiator receive procedures 20.44.1 ProcessLTR() |
1286 | 20.45 MEP Linktrace Initiator receive state machine 20.46 Linktrace Responder variables 20.46.1 nPendingLTRs 20.46.2 LTMreceived 20.46.3 LTMPDU |
1287 | 20.47 LTM Receiver procedures 20.47.1 ProcessLTM() |
1291 | 20.47.2 clearPendingLTRs() 20.47.3 ForwardLTM() |
1292 | 20.47.4 enqueLTR() |
1293 | 20.48 LTM Receiver state machine |
1294 | 20.49 LTR Transmitter procedure 20.49.1 xmitOldestLTR() 20.50 LTR Transmitter state machine |
1295 | 20.51 CFM PDU validation and versioning 20.51.1 Goals of CFM PDU versioning 20.51.2 PDU transmission 20.51.3 PDU validation |
1296 | 20.51.4 Validation pass |
1297 | 20.51.5 Execution pass 20.51.6 Future extensions |
1298 | 20.52 PDU identification 20.53 Use of transaction IDs and sequence numbers |
1300 | 21. Encoding of CFM PDUs 21.1 Structure, representation, and encoding 21.2 CFM encapsulation |
1301 | 21.3 CFM request and indication parameters 21.3.1 destination_address parameter 21.3.2 source_address parameter 21.4 Common CFM Header 21.4.1 MD Level 21.4.2 Version |
1302 | 21.4.3 OpCode 21.4.4 Flags |
1303 | 21.4.5 First TLV Offset 21.5 TLV format 21.5.1 General format for CFM TLVs |
1304 | 21.5.2 Organization-Specific TLV |
1305 | 21.5.3 Sender ID TLV |
1306 | 21.5.4 Port Status TLV |
1307 | 21.5.5 Interface Status TLV |
1308 | 21.5.6 Data TLV 21.5.7 End TLV 21.6 CCM format |
1309 | 21.6.1 Flags |
1310 | 21.6.2 First TLV Offset 21.6.3 Sequence Number 21.6.4 Maintenance association Endpoint Identifier 21.6.5 Maintenance Association Identifier |
1313 | 21.6.6 Defined by ITU-T Y.1731 (02/2008) 21.6.7 Optional CCM TLVs 21.7 LBM and LBR formats 21.7.1 Flags |
1314 | 21.7.2 First TLV Offset 21.7.3 Loopback Transaction Identifier 21.7.4 Additional LBM/LBR TLVs |
1315 | 21.7.5 PBB-TE MIP TLV |
1316 | 21.8 LTM format 21.8.1 Flags 21.8.2 First TLV Offset 21.8.3 LTM Transaction Identifier |
1317 | 21.8.4 LTM TTL 21.8.5 Original MAC Address 21.8.6 Target MAC Address 21.8.7 Additional LTM TLVs 21.8.8 LTM Egress Identifier TLV |
1318 | 21.9 LTR format 21.9.1 Flags |
1319 | 21.9.2 First TLV Offset 21.9.3 LTR Transaction Identifier 21.9.4 Reply TTL 21.9.5 Relay Action 21.9.6 Additional LTR TLVs |
1320 | 21.9.7 LTR Egress Identifier TLV 21.9.8 Reply Ingress TLV |
1322 | 21.9.9 Reply Egress TLV |
1324 | 22. CFM in systems 22.1 CFM shims in Bridges 22.1.1 Preliminary positioning of MPs |
1325 | 22.1.2 CFM and the Forwarding Process |
1327 | 22.1.3 Up/Down separation of MPs |
1329 | 22.1.4 Service instances over multiple Bridges |
1331 | 22.1.5 Multiple VID service instances 22.1.6 Untagged CFM PDUs 22.1.7 MPs and non-VLAN-aware Bridges |
1332 | 22.1.8 MPs and other standards |
1334 | 22.1.9 CFM and IEEE 802.3 OAM 22.2 Maintenance Entity creation |
1335 | 22.2.1 Creating Maintenance Domains and MAs 22.2.2 Creating MEPs |
1337 | 22.2.3 Creating MIPs |
1338 | 22.2.4 CFM configuration errors |
1339 | 22.3 MPs, Ports, and MD Level assignment 22.4 Stations and CFM |
1340 | 22.5 Scalability of CFM |
1341 | 22.6 CFM in Provider Bridges 22.6.1 MPs and C-VLAN components |
1342 | 22.6.2 Maintenance C-VLAN on a Port-based service interface |
1343 | 22.6.3 Maintenance C-VLAN on a C-tagged service interface 22.6.4 MPs and Port-mapping S-VLAN components |
1345 | 22.7 Management Port MEPs and CFM in the enterprise environment |
1347 | 22.8 Implementing CFM on Bridges that implement earlier revisions of IEEE Std 802.1Q |
1348 | 23. MAC status propagation |
1349 | 23.1 Model of operation |
1350 | 23.1.1 MAC Status Shim (MSS) |
1351 | 23.1.2 Relationship of CFM to the MSS 23.2 MAC Status Protocol (MSP) overview |
1356 | 23.3 MSP state machines |
1357 | 23.4 State machine timers 23.4.1 linkNotifyWhen 23.4.2 linkNotifyWhile 23.4.3 macNotifyWhile 23.4.4 macRecoverWhile 23.5 MSP performance parameters |
1358 | 23.5.1 LinkNotify 23.5.2 LinkNotifyWait 23.5.3 LinkNotifyRetry 23.5.4 MACNotify 23.5.5 MACNotifyTime 23.5.6 MACRecoverTime 23.6 State machine variables 23.6.1 BEGIN 23.6.2 addConfirmed 23.6.3 disableMAC 23.6.4 disabledMAC |
1359 | 23.6.5 disableMSS 23.6.6 lossConfirmed 23.6.7 macOperational 23.6.8 mssOperational 23.6.9 prop 23.6.10 rxAck 23.6.11 rxAdd 23.6.12 rxAddConfirm 23.6.13 rxLoss 23.6.14 rxLossConfirm 23.6.15 txAck 23.6.16 txAdd |
1360 | 23.6.17 txAddConfirm 23.6.18 txLoss 23.6.19 txLossConfirm 23.7 State machine procedures 23.8 Status Transition state machine (STM) |
1361 | 23.9 Status Notification state machine (SNM) 23.10 Receive Process 23.11 Transmit Process 23.12 Management of MSP |
1362 | 23.13 MSPDU transmission, addressing, and protocol identification 23.13.1 Destination MAC Address 23.13.2 Source MAC Address |
1363 | 23.13.3 Priority 23.13.4 EtherType use and encoding 23.14 Representation and encoding of octets 23.15 MSPDU structure 23.15.1 Protocol Version |
1364 | 23.15.2 Packet Type 23.16 Validation of received MSPDUs 23.17 Other MSP participants |
1365 | 24. Bridge performance 24.1 Guaranteed Port Filtering Rate 24.2 Guaranteed Bridge Relaying Rate 24.3 RSTP performance requirements |
1367 | 25. Support of the MAC Service by PBBNs |
1369 | 25.1 Service transparency 25.2 Customer service interface |
1370 | 25.3 Port-based service interface |
1371 | 25.4 S-tagged service interface |
1373 | 25.5 I-tagged service interface |
1375 | 25.6 Service instance segregation 25.7 Service instance selection and identification |
1376 | 25.8 Service priority and drop eligibility selection 25.9 Service access protection |
1378 | 25.9.1 Class II redundant LANs access protection |
1379 | 25.9.2 Class III simple redundant LANs and nodes access protection |
1380 | 25.10 Support of the MAC Service by a PBB-TE Region |
1381 | 25.10.1 Provisioning TESIs |
1382 | 25.10.2 ESP forwarding behavior |
1383 | 25.11 Transparent service interface |
1385 | 26. Principles of Provider Backbone Bridged Network (PBBN) operation 26.1 PBBN overview |
1386 | 26.2 PBBN example |
1388 | 26.3 B-VLAN connectivity |
1389 | 26.4 Backbone addressing |
1390 | 26.4.1 Learning individual backbone addresses at a PIP 26.4.2 Translating backbone destination addresses at a CBP |
1391 | 26.4.3 Backbone addressing considerations for CFM MPs 26.5 Detection of connectivity loops through attached networks 26.6 Scaling of PBBs |
1392 | 26.6.1 Hierarchal PBBNs 26.6.2 Peer PBBNs 26.7 Network management |
1393 | 26.8 CFM in PBBs |
1398 | 26.8.1 CFM over Port-based and S-tagged service interfaces |
1399 | 26.8.2 CFM over I-tagged Service Interfaces 26.8.3 CFM over hierarchal E-NNI 26.8.4 CFM over peer E-NNI |
1400 | 26.9 CFM in a PBB-TE Region 26.9.1 Addressing PBB-TE MEPs |
1401 | 26.9.2 TESI identification 26.9.3 PBB-TE MEP placement in a Bridge Port 26.9.4 PBB-TE MIP placement in a Bridge Port 26.9.5 TESI Maintenance Domains |
1402 | 26.9.6 PBB-TE enhancements of the CFM protocols |
1404 | 26.9.7 Addressing Infrastructure Segment MEPs 26.9.8 Infrastructure Segment identification |
1405 | 26.9.9 Infrastructure Segment MEP placement in a Bridge Port 26.9.10 Infrastructure Segment Maintenance Domains 26.9.11 IPS extensions to Continuity Check operation |
1407 | 26.10 Protection switching for point-to-point TESIs 26.10.1 Introduction |
1408 | 26.10.2 1:1 point-to-point TESI protection switching |
1411 | 26.10.3 Protection Switching state machines |
1416 | 26.11 IPS in PBB-TE Region |
1417 | 26.11.1 Infrastructure Segment monitoring |
1418 | 26.11.2 1:1 IPS |
1421 | 26.11.3 IPS Control entity |
1422 | 26.11.4 1:1 IPS state machines 26.11.5 M:1 IPS |
1428 | 26.12 Mismatch defect |
1429 | 26.13 Signaling VLAN registrations among I-components |
1430 | 27. Shortest Path Bridging (SPB) |
1432 | 27.1 Protocol design requirements |
1433 | 27.2 Protocol support |
1434 | 27.3 Protocol design goals 27.4 ISIS-SPB VLAN configuration |
1435 | 27.4.1 SPT Region and ISIS-SPB adjacency determination |
1437 | 27.5 ISIS-SPB information |
1438 | 27.6 Calculating CIST connectivity |
1439 | 27.7 Connectivity between regions in the same domain 27.8 Calculating SPT connectivity |
1440 | 27.8.1 ISIS-SPB overload 27.9 Loop prevention 27.10 SPVID and SPSourceID allocation |
1442 | 27.11 Allocation of VIDs to FIDs |
1443 | 27.12 SPBV SPVID translation 27.13 VLAN topology management |
1444 | 27.14 Individual addresses and SPBM |
1445 | 27.14.1 Loop mitigation 27.14.2 Loop prevention |
1446 | 27.15 SPBM group addressing |
1448 | 27.16 Backbone service instance topology management 27.17 Equal cost shortest paths, ECTs, and load spreading |
1449 | 27.18 Connectivity Fault Management for SPBM 27.18.1 SPBM MA types 27.18.2 SPBM MEP placement in a Bridge Port |
1450 | 27.18.3 SPBM MIP placement in a Bridge Port 27.18.4 SPBM modifications of the CFM protocols |
1452 | 27.19 Using SPBV and SPBM modes 27.19.1 Shortest Path Bridging—VID |
1453 | 27.19.2 Shortest Path Bridging—MAC |
1455 | 27.20 Security considerations |
1456 | 28. ISIS-SPB Link State Protocol 28.1 ISIS-SPB control plane MAC |
1457 | 28.2 Formation and maintenance of ISIS-SPB adjacencies |
1458 | 28.3 Loop prevention 28.4 The Agreement Digest |
1459 | 28.4.1 Agreement Digest Format Identifier 28.4.2 Agreement Digest Format Capabilities 28.4.3 Agreement Digest Convention Identifier |
1460 | 28.4.4 Agreement Digest Convention Capabilities 28.4.5 Agreement Digest Edge Count 28.4.6 The Computed Topology Digest |
1461 | 28.5 Symmetric shortest path tie breaking |
1462 | 28.6 Symmetric ECT framework |
1463 | 28.7 Symmetric ECT |
1464 | 28.8 Symmetric ECT Algorithm details |
1465 | 28.9 ECT Migration |
1466 | 28.9.1 Use of a new ECT Algorithm in SPBV 28.9.2 Use of a new ECT Algorithm in SPBM |
1467 | 28.10 MAC address registration |
1468 | 28.11 Circuit IDs and Port Identifiers 28.12 ISIS-SPB TLVs |
1469 | 28.12.1 MT-Capability TLV 28.12.2 SPB MCID sub-TLV |
1470 | 28.12.3 SPB Digest sub-TLV 28.12.4 SPB Base VLAN-Identifiers sub-TLV |
1472 | 28.12.5 SPB Instance sub-TLV |
1474 | 28.12.6 SPB Instance Opaque ECT Algorithm sub-TLV |
1475 | 28.12.7 SPB Link Metric sub-TLV |
1476 | 28.12.8 SPB Adjacency Opaque ECT Algorithm sub-TLV |
1477 | 28.12.9 SPBV MAC address sub-TLV |
1478 | 28.12.10 SPBM Service Identifier and Unicast Address (ISID-ADDR) sub-TLV |
1481 | 29. DDCFM operations and protocols 29.1 Principles of DDCFM operation 29.1.1 Data-driven and data-dependent faults (DDFs) 29.1.2 Basic principle to diagnose and isolate DDFs |
1484 | 29.2 DDCFM Entity operation 29.2.1 DDCFM implementation |
1485 | 29.2.2 FPT RR |
1486 | 29.2.3 RR-related parameters |
1487 | 29.2.4 Reflection Target and RFM Receiver 29.2.5 RPT-related parameters |
1488 | 29.2.6 Decapsulator Responder (DR) |
1489 | 29.2.7 SFM Originator 29.3 DDCFM protocols 29.3.1 RR variables |
1491 | 29.3.2 RR Filter procedures |
1492 | 29.3.3 RR Encapsulation procedures |
1493 | 29.3.4 RR Transmit procedure |
1494 | 29.3.5 RR-related state machines |
1496 | 29.3.6 RFM Receiver variables 29.3.7 RFM Receiver procedure |
1497 | 29.3.8 DR variables |
1498 | 29.3.9 DR procedures |
1499 | 29.3.10 Decapsulator Responder state machine 29.4 Encoding of DDCFM PDUs 29.4.1 RFM and SFM Header |
1500 | 29.4.2 RFM format |
1501 | 29.4.3 SFM format |
1503 | 30. Principles of congestion notification 30.1 Congestion notification design requirements |
1505 | 30.2 Quantized Congestion Notification protocol (QCN) |
1506 | 30.2.1 The CP algorithm |
1507 | 30.2.2 Basic RP algorithm |
1508 | 30.2.3 RP algorithm with timer |
1509 | 30.3 Congestion Controlled Flow (CCF) |
1510 | 30.4 Congestion Notification Priority Value (CNPV) 30.5 Congestion Notification tag (CN-TAG) 30.6 Congestion Notification Domain (CND) |
1511 | 30.7 Multicast data 30.8 Congestion notification and additional tags |
1513 | 31. Congestion notification entity operation 31.1 Congestion-aware Bridge Forwarding Process |
1514 | 31.1.1 Congestion Point (CP) 31.1.2 CP ingress multiplexer 31.2 Congestion-aware end station functions |
1515 | 31.2.1 Output flow segregation |
1516 | 31.2.2 Per-CNPV station function |
1518 | 31.2.3 Flow Select Database 31.2.4 Flow multiplexer 31.2.5 CNM demultiplexer 31.2.6 Input flow segregation |
1519 | 31.2.7 End station input queue 31.2.8 Reception selection |
1520 | 32. Congestion notification protocol 32.1 CND operations 32.1.1 CND defense |
1522 | 32.1.2 Automatic CND recognition 32.1.3 Variables controlling CND defense |
1523 | 32.2 CN component variables |
1524 | 32.2.1 cngMasterEnable 32.2.2 cngCnmTransmitPriority 32.2.3 cngDiscardedFrames 32.2.4 cngErroredPortList 32.3 Congestion notification per-CNPV variables 32.3.1 cncpDefModeChoice |
1525 | 32.3.2 cncpAlternatePriority 32.3.3 cncpAutoAltPri 32.3.4 cncpAdminDefenseMode 32.3.5 cncpCreation 32.3.6 cncpLldpInstanceChoice 32.3.7 cncpLldpInstanceSelector |
1526 | 32.4 CND defense per-Port per-CNPV variables 32.4.1 cnpdDefModeChoice 32.4.2 cnpdAdminDefenseMode |
1527 | 32.4.3 cnpdAutoDefenseMode 32.4.4 cnpdLldpInstanceChoice 32.4.5 cnpdLldpInstanceSelector 32.4.6 cnpdAlternatePriority 32.4.7 cnpdXmitCnpvCapable 32.4.8 cnpdXmitReady |
1528 | 32.4.9 cncpDoesEdge 32.4.10 cnpdAcceptsCnTag 32.4.11 cnpdRcvdCnpv 32.4.12 cnpdRcvdReady 32.4.13 cnpdIsAdminDefMode |
1529 | 32.4.14 cnpdDefenseMode 32.5 CND defense procedures 32.5.1 DisableCnpvRemapping() 32.5.2 TurnOnCnDefenses() 32.5.3 TurnOffCnDefenses() 32.6 CND defense state machine |
1530 | 32.7 Congestion notification protocol |
1531 | 32.8 CP variables |
1532 | 32.8.1 cpMacAddress 32.8.2 cpId 32.8.3 cpQSp 32.8.4 cpQLen 32.8.5 cpQLenOld 32.8.6 cpW 32.8.7 cpQOffset 32.8.8 cpQDelta 32.8.9 cpFb |
1533 | 32.8.10 cpEnqued 32.8.11 cpSampleBase 32.8.12 cpDiscardedFrames 32.8.13 cpTransmittedFrames 32.8.14 cpTransmittedCnms 32.8.15 cpMinHeaderOctets 32.9 CP procedures 32.9.1 Random 32.9.2 NewCpSampleBase() |
1534 | 32.9.3 EM_UNITDATA.request (parameters) 32.9.4 GenerateCnmPdu() |
1535 | 32.10 RP per-Port per-CNPV variables 32.10.1 rpppMaxRps 32.10.2 rpppCreatedRps |
1536 | 32.10.3 rpppRpCentiseconds 32.11 RP group variables 32.11.1 rpgEnable 32.11.2 rpgTimeReset 32.11.3 rpgByteReset |
1537 | 32.11.4 rpgThreshold 32.11.5 rpgMaxRate 32.11.6 rpgAiRate 32.11.7 rpgHaiRate 32.11.8 rpgGd 32.11.9 rpgMinDecFac 32.11.10 rpgMinRate 32.12 RP timer |
1538 | 32.12.1 RpWhile 32.13 RP variables 32.13.1 rpEnabled 32.13.2 rpByteCount 32.13.3 rpByteStage 32.13.4 rpTimeStage 32.13.5 rpTargetRate |
1539 | 32.13.6 rpCurrentRate 32.13.7 rpFreeze 32.13.8 rpLimiterRate 32.13.9 rpFb 32.14 RP procedures 32.14.1 ResetCnm |
1540 | 32.14.2 TestRpTerminate 32.14.3 TransmitDataFrame 32.14.4 ReceiveCnm |
1541 | 32.14.5 ProcessCnm 32.14.6 AdjustRates 32.15 RP rate control state machine |
1543 | 32.16 Congestion notification and encapsulation interworking function |
1545 | 33. Encoding of congestion notification PDUs 33.1 Structure, representation, and encoding 33.2 CN-TAG format |
1546 | 33.2.1 Flow Identifier 33.3 Congestion Notification Message (CNM) 33.4 Congestion Notification Message PDU format 33.4.1 Version |
1547 | 33.4.2 ReservedV 33.4.3 Quantized Feedback 33.4.4 Congestion Point Identifier 33.4.5 cnmQOffset |
1548 | 33.4.6 cnmQDelta 33.4.7 Encapsulated priority 33.4.8 Encapsulated destination MAC address 33.4.9 Encapsulated MSDU length 33.4.10 Encapsulated MSDU 33.4.11 CNM Validation |
1549 | 34. Forwarding and Queuing Enhancements for time-sensitive streams (FQTSS) 34.1 Overview 34.2 Detection of SRP domains |
1550 | 34.3 The bandwidth availability parameters 34.3.1 Relationships among bandwidth availability parameters |
1551 | 34.3.2 Bandwidth availability parameter management 34.4 Deriving actual bandwidth requirements from the size of the MSDU |
1552 | 34.5 Mapping priorities to traffic classes for time-sensitive streams |
1554 | 34.6 End station behavior 34.6.1 Talker behavior |
1555 | 34.6.2 Listener behavior |
1556 | 35. Stream Reservation Protocol (SRP) |
1557 | 35.1 Multiple Stream Registration Protocol (MSRP) |
1558 | 35.1.1 MSRP and Shared Media 35.1.2 Behavior of end stations |
1560 | 35.1.3 Behavior of Bridges 35.1.4 SRP domains and status parameters 35.2 Definition of the MSRP application |
1561 | 35.2.1 Definition of internal state variables |
1563 | 35.2.2 Definition of MRP elements |
1573 | 35.2.3 Provision and support of Stream registration service |
1577 | 35.2.4 MSRP Attribute Propagation |
1582 | 35.2.5 Operational reporting and statistics 35.2.6 Encoding |
1583 | 35.2.7 Attribute value support requirements |
1584 | 36. sPriority-based Flow Control (PFC) 36.1 PFC operation 36.1.1 Overview |
1585 | 36.1.2 PFC primitives |
1586 | 36.1.3 Detailed specification of PFC operation |
1587 | 36.2 PFC-aware system queue functions |
1588 | 36.2.1 PFC Initiator 36.2.2 PFC Receiver |
1590 | 37. Enhanced Transmission Selection (ETS) 37.1 Overview 37.1.1 Relationship to other transmission selection algorithms 37.2 ETS configuration parameters 37.3 ETS algorithm |
1591 | 37.4 Legacy configuration |
1592 | 38. Data Center Bridging eXchange protocol (DCBX) 38.1 Overview 38.2 Goals 38.3 Types of DCBX attributes 38.3.1 Informational attributes |
1593 | 38.4 DCBX and LLDP 38.4.1 Asymmetric attribute passing |
1594 | 38.4.2 Symmetric attribute passing |
1596 | 39. Multiple I-SID Registration Protocol (MIRP) 39.1 MIRP overview |
1598 | 39.1.1 Behavior of I-components 39.1.2 Behavior of B-components 39.2 Definition of the MIRP application 39.2.1 Definition of MRP elements |
1601 | 39.2.2 Alternate MIRP model for B-components |
1603 | 39.2.3 Use of “new” declaration capability 39.2.4 Attribute value support requirements 39.2.5 MRP Message filtering |
1604 | 40. Edge Virtual Bridging (EVB) |
1605 | 40.1 EVB architecture without S-channels |
1606 | 40.2 EVB architecture with S-channels |
1608 | 40.3 Asymmetric EVB architecture without S-channels |
1610 | 40.4 EVB status parameters 40.4.1 EVBMode = Not supported 40.4.2 EVBMode = EVB Bridge 40.4.3 EVBMode = EVB station |
1611 | 41. VSI Discovery and Configuration Protocol (VDP) 41.1 VSI manager ID TLV definition 41.1.1 TLV type 41.1.2 TLV information string length |
1612 | 41.1.3 VSI Manager ID 41.2 VDP association TLV definitions 41.2.1 TLV type |
1613 | 41.2.2 TLV information string length 41.2.3 Status |
1614 | 41.2.4 VSI Type ID (VTID) 41.2.5 VSI Type Version 41.2.6 VSIID format 41.2.7 VSIID |
1615 | 41.2.8 Filter Info format 41.2.9 Filter Info field |
1618 | 41.2.10 VDP TLV type and Status semantics |
1619 | 41.3 Organizationally defined TLV definitions 41.3.1 TLV type 41.3.2 TLV information string length 41.3.3 Organizationally unique identifier (OUI) or Company ID (CID) 41.3.4 Organizationally defined information 41.4 Validation rules for VDP TLVs |
1620 | 41.5 VDP state machines 41.5.1 State machine conventions 41.5.2 Bridge VDP state machine |
1621 | 41.5.3 Station VDP state machine |
1622 | 41.5.4 VDP state machine timers 41.5.5 VDP state machine variables and parameters |
1625 | 41.5.6 Command-Response TLV field references in state machines 41.5.7 VDP state machine procedures |
1627 | 42. S-Channel Discovery and Configuration Protocol (CDCP) 42.1 CDCP discovery and configuration 42.2 CDCP state machine overview |
1628 | 42.3 CDCP configuration state machine |
1630 | 42.4 CDCP configuration variables 42.4.1 AdminChnCap 42.4.2 AdminRole 42.4.3 AdminSVIDWants 42.4.4 LastLocalSVIDPool 42.4.5 LastRemoteSVIDList 42.4.6 LastSVIDWants 42.4.7 LocalSVIDPool 42.4.8 OperChnCap |
1631 | 42.4.9 OperRole 42.4.10 OperSVIDList 42.4.11 RemoteChnCap 42.4.12 RemoteRole 42.4.13 RemoteSVIDList 42.4.14 schState 42.5 CDCP configuration procedures 42.5.1 SetSVIDRequest (OperRole, AdminSVIDWants, OperSVIDList) |
1632 | 42.5.2 RxSVIDConfig (OperSVIDList, LastRemoteSVIDList) 42.5.3 TxSVIDConfig (OperChnCap, RemoteChnCap, LastLocalSVIDPool, RemoteSVIDList, OperSVIDList) |
1633 | 43. Edge Control Protocol (ECP) 43.1 ECP operation |
1634 | 43.2 Edge Control Sublayer Service (ECSS) 43.3 ECP state machines 43.3.1 State machine conventions 43.3.2 Overview |
1635 | 43.3.3 Edge Control Protocol Data Unit (ECPDU) |
1636 | 43.3.4 ECP transmit state machine |
1637 | 43.3.5 ECP receive state machine 43.3.6 ECP state machine timers |
1638 | 43.3.7 ECP state machine variables and parameters |
1639 | 43.3.8 ECP state machine procedures |
1640 | 44. Equal Cost Multiple Paths (ECMP) 44.1 SPBM ECMP 44.1.1 ECMP Operation |
1641 | 44.1.2 ECMP ECT Algorithm |
1643 | 44.1.3 Loop prevention for ECMP 44.2 Support for Flow Filtering |
1644 | 44.2.1 Flow filtering tag (F-TAG) |
1645 | 44.2.2 F-TAG processing |
1646 | 44.2.3 Forwarding process extension for flow filtering |
1647 | 44.2.4 TTL Loop mitigation 44.2.5 CFM for ECMP with flow filtering |
1649 | 44.2.6 Operation with selective support for flow filtering |
1650 | 45. Path Control and Reservation (PCR) 45.1 Explicit trees |
1654 | 45.1.1 Tree structures |
1655 | 45.1.2 Explicit ECT Algorithms |
1657 | 45.1.3 ISIS-PCR VLAN configuration |
1661 | 45.1.4 Use of VIDs for strict explicit trees |
1662 | 45.1.5 MAC addresses and ISIS-PCR 45.1.6 Filtering Database entries for explicit trees |
1663 | 45.1.7 ISIS-PCR support 45.1.8 Attributes for path computation |
1665 | 45.1.9 Topology sub-TLV |
1668 | 45.1.10 Hop sub-TLV |
1671 | 45.1.11 Administrative Group sub-TLV 45.1.12 Bandwidth Constraint sub-TLV |
1672 | 45.2 Reservation 45.2.1 Bandwidth Assignment sub-TLV |
1674 | 45.2.2 Timestamp sub-TLV 45.2.3 Precedence ordering 45.3 Redundancy |
1675 | 45.3.1 Loop-free alternates for unicast data flows 45.3.2 Static redundant trees |
1676 | 45.3.3 Maximally Redundant Trees (MRTs) |
1679 | 45.3.4 MRTs with centralized GADAG computation |
1683 | Annex A (normative) PICS proforma—Bridge implementations A.1 Introduction A.2 Abbreviations and special symbols A.2.1 Status symbols A.2.2 General abbreviations |
1684 | A.3 Instructions for completing the PICS proforma A.3.1 General structure of the PICS proforma A.3.2 Additional information A.3.3 Exception information |
1685 | A.3.4 Conditional status A.3.4.1 Conditional items A.3.4.2 Predicates |
1686 | A.4 PICS proforma for IEEE Std 802.1Q—Bridge implementations A.4.1 Implementation identification A.4.2 Protocol summary, IEEE Std 802.1Q |
1687 | A.5 Major capabilities |
1691 | A.6 Media access control methods |
1692 | A.7 Relay and filtering of frames |
1693 | A.8 Basic Filtering Services |
1694 | A.9 Addressing |
1696 | A.10 Rapid Spanning Tree Protocol (RSTP) |
1698 | A.11 BPDU encoding A.12 Implementation parameters |
1699 | A.13 Performance A.14 Bridge management |
1710 | A.15 Remote management A.16 Expedited traffic classes |
1711 | A.17 Extended Filtering Services A.18 Multiple Spanning Tree Protocol (MSTP) |
1713 | A.19 VLAN support |
1717 | A.20 Multiple MAC Registration Protocol (MMRP) |
1719 | A.21 Multiple VLAN Registration Protocol (MVRP) |
1720 | A.22 Multiple Registration Protocol (MRP) |
1721 | A.23 Connectivity Fault Management (CFM) |
1727 | A.24 Management Information Base (MIB) |
1730 | A.25 Protection Switching (PS) |
1731 | A.26 Data-driven and data-dependent connectivity fault management (DDCFM) A.27 Two-Port MAC Relay (TPMR) |
1732 | A.28 MAC Status Protocol (MSP) |
1733 | A.29 Forwarding and Queuing Enhancements for time-sensitive streams (FQTSS) A.30 Congestion notification |
1735 | A.31 Stream Reservation Protocol (SRP) |
1737 | A.32 Multiple I-SID Registration Protocol (MIRP) |
1738 | A.33 Priority-based Flow Control (PFC) |
1739 | A.34 Enhanced Transmission Selection (ETS) A.35 Data Center Bridging eXchange protocol (DCBX) A.36 Infrastructure Protection Switching (IPS) |
1740 | A.37 Shortest Path Bridging (SPB) A.38 EVB Bridge |
1742 | A.39 EVB station |
1743 | A.40 Edge relay (ER) |
1744 | A.41 VEB and VEPA ER components |
1745 | A.42 VDP, CDCP, and ECP |
1746 | A.43 Path Control and Reservation |
1747 | A.44 Scheduled traffic |
1748 | A.45 Frame preemption A.46 Per-stream filtering and policing |
1749 | Annex B (normative) PICS proforma—End station implementations B.1 Introduction B.2 Abbreviations and special symbols B.2.1 Status symbols B.2.2 General abbreviations |
1750 | B.3 Instructions for completing the PICS proforma B.3.1 General structure of the PICS proforma B.3.2 Additional information B.3.3 Exception information |
1751 | B.3.4 Conditional status B.3.4.1 Conditional items B.3.4.2 Predicates |
1752 | B.4 PICS proforma for IEEE Std 802.1Q—End station implementations B.4.1 Implementation identification B.4.2 Protocol summary, IEEE Std 802.1Q |
1753 | B.5 Major capabilities |
1754 | B.6 Multiple MAC Registration Protocol (MMRP) |
1755 | B.7 Multiple VLAN Registration Protocol (MVRP) B.8 Multiple Registration Protocol (MRP) |
1756 | B.9 Forwarding and Queuing Enhancements for time-sensitive streams (FQTSS) |
1757 | B.10 Stream Reservation Protocol (SRP) |
1759 | B.11 Congestion notification |
1761 | B.12 Priority-based Flow Control (PFC) |
1762 | B.13 Enhanced Transmission Selection (ETS) B.14 Data Center Bridging eXchange protocol (DCBX) B.15 Scheduled traffic |
1763 | B.16 Frame Preemption B.17 Per-stream filtering and policing |
1764 | Annex C (normative) Designated MSRP Node (DMN) Implementations C.1 DMNs on CSNs C.1.1 CSN characteristics |
1765 | C.1.2 DMN handling on CSN C.1.2.1 DMN selection and migration |
1766 | C.1.3 MSRPDU handling on a CSN |
1767 | C.1.4 CSN bandwidth fluctuations C.2 DMN on MoCA C.2.1 DMN Selection on MoCA Network C.2.1.1 DMN-capable node discovery |
1768 | C.2.1.2 IEEE DMN Device Attribute IE |
1769 | C.2.1.3 DMN selection and confirmation |
1771 | C.2.2 MoCA network bandwidth management |
1772 | C.3 DMNs on IEEE 802.11 media |
1774 | C.3.1 MSRP handling |
1777 | C.3.2 BSS DMN selection |
1778 | C.3.3 BSS network bandwidth management C.3.3.1 MSRPDU Encapsulation/De-encapsulation C.3.3.2 QoS Maintenance Report C.3.3.3 SRP TSpec to IEEE 802.11 TSPEC mapping |
1781 | Annex D (normative) IEEE 802.1 Organizationally Specific TLVs D.1 Requirements of the IEEE 802.1 Organizationally Specific TLV sets |
1782 | D.2 Organizationally Specific TLV definitions D.2.1 Port VLAN ID TLV D.2.1.1 port VLAN identifier (PVID) D.2.1.2 Port VLAN ID TLV usage rules D.2.2 Port And Protocol VLAN ID TLV |
1783 | D.2.2.1 flags D.2.2.2 port and protocol VLAN identifier (PPVID) D.2.2.3 Port And Protocol VLAN ID TLV usage rules D.2.3 VLAN Name TLV |
1784 | D.2.3.1 TLV information string length D.2.3.2 VLAN ID (VID) D.2.3.3 VLAN name length D.2.3.4 VLAN name D.2.3.5 VLAN Name TLV usage rules D.2.4 Protocol Identity TLV D.2.4.1 TLV information string length D.2.4.2 protocol identity length D.2.4.3 protocol identity |
1785 | D.2.4.4 Protocol Identity TLV usage rules D.2.5 VID Usage Digest TLV D.2.5.1 VID Usage Digest D.2.6 Management VID TLV |
1786 | D.2.6.1 Management VID D.2.7 Congestion Notification TLV D.2.7.1 TLV type D.2.7.2 TLV information string length D.2.7.3 Per-priority CNPV indicators D.2.7.4 Per-priority Ready indicators |
1787 | D.2.8 ETS Configuration TLV D.2.8.1 TLV type D.2.8.2 TLV information string length D.2.8.3 Willing D.2.8.4 CBS D.2.8.5 Max TCs D.2.8.6 Priority Assignment Table |
1788 | D.2.8.7 TC Bandwidth Table D.2.8.8 TSA Assignment Table |
1789 | D.2.9 ETS Recommendation TLV D.2.9.1 TLV type D.2.9.2 TLV information string length D.2.9.3 Priority Assignment Table D.2.9.4 TC Bandwidth Table D.2.9.5 TSA Assignment Table |
1790 | D.2.10 Priority-based Flow Control Configuration TLV D.2.10.1 TLV type D.2.10.2 TLV information string length D.2.10.3 Willing D.2.10.4 MBC D.2.10.5 PFC cap |
1791 | D.2.10.6 PFC Enable D.2.11 Application Priority TLV D.2.11.1 TLV type D.2.11.2 TLV information string length |
1792 | D.2.11.3 Application Priority Table D.2.12 EVB TLV |
1793 | D.2.12.1 OUI D.2.12.2 Subtype D.2.12.3 EVB Bridge status |
1794 | D.2.12.4 EVB station status |
1795 | D.2.12.5 R D.2.12.6 RTE (retransmission exponent) D.2.12.7 EVB Mode D.2.12.8 ROL (remote or local) and RWD (resource wait delay) |
1796 | D.2.12.9 ROL (remote or local) and RKA (reinit keep alive) D.2.13 CDCP TLV D.2.13.1 OUI D.2.13.2 Subtype D.2.13.3 Role D.2.13.4 RES1 |
1797 | D.2.13.5 SComp D.2.13.6 Res2 D.2.13.7 ChnCap D.2.13.8 SCID/SVID |
1798 | D.2.14 Application VLAN TLV D.2.14.1 TLV type D.2.14.2 TLV information string length D.2.14.3 Application VLAN Table |
1799 | D.3 IEEE 802.1 Organizationally Specific TLV management D.3.1 IEEE 802.1 Organizationally Specific TLV selection management |
1800 | D.3.2 IEEE 802.1 managed objects—TLV variables D.3.2.1 Port VLAN ID TLV managed objects D.3.2.2 Port And Protocol VLAN ID TLV managed objects D.3.2.3 VLAN Name TLV managed objects D.3.2.4 Protocol Identity TLV managed objects D.3.2.5 VID Usage Digest TLV managed objects D.3.2.6 Management VID TLV managed objects D.3.2.7 Link Aggregation TLV managed objects D.3.2.8 Congestion Notification TLV managed objects D.3.2.9 EVB TLV managed objects D.3.2.10 CDCP TLV managed objects |
1801 | D.4 PICS proforma for IEEE 802.1 Organizationally Specific TLV extensions, D.4.1 Implementation identification D.4.2 Protocol summary, IEEE Std 802.1Q |
1802 | D.4.3 Major capabilities and options |
1804 | D.5 IEEE 802.1/LLDP extension MIB D.5.1 Internet Standard Management Framework D.5.2 Structure of the IEEE 802.1/LLDP extension MIB |
1812 | D.5.3 Relationship to other MIBs D.5.4 Security considerations for IEEE 802.1 LLDP extension MIB module |
1815 | D.5.5 IEEE 802.1 LLDP extension MIB module—version 2 |
1888 | D.5.6 EVB extensions to the IEEE 802.1 LLDP extension MIB module |
1897 | Annex E (normative) Notational conventions used in state diagrams |
1899 | Annex F (informative) Shared and Independent VLAN Learning (SVL and IVL) F.1 Requirements for Shared and Independent Learning |
1900 | F.1.1 Connecting independent VLANs |
1901 | F.1.2 Duplicate MAC addresses |
1902 | F.1.3 Asymmetric VLANs and Rooted-Multipoint connectivity F.1.3.1 Multi-netted Server |
1903 | F.1.3.2 Rooted-Multipoint |
1905 | F.1.4 Shared learning and Shortest Path Bridging VID (SPBV) mode |
1907 | F.1.5 Generic constraints on SVL and IVL use |
1908 | Annex G (informative) MAC method-dependent aspects of VLAN support G.1 Example tagged IEEE 802.3 Ethertype-encoded frame format G.2 Padding and frame size considerations G.2.1 Treatment of PAD fields in IEEE 802.3 frames |
1909 | G.2.2 Maximum PDU size G.2.3 Minimum PDU size |
1910 | G.3 Tag insertion and removal for LLC media G.4 IEEE 802.11 and PMPN media |
1911 | G.4.1 IEEE 802.11 Portal convergence G.4.2 Point-to-Multipoint Network convergence: multiple connections G.4.3 Point-to-Multipoint Network convergence: single connection |
1912 | Annex H (informative) Interoperability considerations H.1 Requirements for interoperability H.1.1 Static filtering requirements H.1.2 Configuration requirements for VLAN-tagging |
1913 | H.2 Homogenous VLAN-aware networks H.2.1 Consistency of static VLAN filtering |
1914 | H.2.2 Consistent view of the “untagged VLAN(s)” on a given LAN |
1915 | H.3 Heterogeneous networks: Intermixing MAC Bridges (M) and VLAN Bridges (V) H.3.1 Example: Adding a VLAN Bridge to provide filtering to a MAC Bridged Network |
1916 | H.3.2 Example: Adding a MAC Bridge to a (previously) Homogenous VLAN Bridged Network H.4 Intermixing Port-based classification and Port-and-Protocol-based classification or future enhancements in VLAN Bridges |
1917 | H.4.1 Example: Intermixing Protocol-based ingress rules H.4.2 Differing views of untagged traffic on a given LAN |
1918 | Annex I (informative) Priority and drop precedence I.1 Traffic types |
1919 | I.2 Managing latency and throughput I.3 Traffic type to traffic class mapping |
1921 | I.4 Traffic types and priority values |
1922 | I.5 Supporting the credit-based shaper algorithm |
1923 | I.6 Supporting drop precedence |
1924 | I.7 Priority Code Point allocation I.8 Interoperability |
1926 | Annex J (informative) CFM protocol design and use J.1 Origin of CFM J.2 Deployment of CFM |
1927 | J.3 MD Level allocation alternative J.4 Relationship of IEEE Std 802.1Q CFM to other standards |
1928 | J.5 Interpreting Linktrace results |
1929 | J.6 MP addressing: Individual and Shared MP addresses |
1930 | J.6.1 Individual MP address model J.6.2 Shared MP address model and the CFM Port |
1934 | Annex K (informative) TPMR use cases K.1 Use case 1—TPMR as User to Network Interface (UNI) demarcation device |
1935 | K.2 Use case 2—TPMRs with aggregated links K.3 Use case 3—Multiple TPMRs |
1936 | K.4 Special cases |
1939 | Annex L (informative) Operation of the credit-based shaper algorithm L.1 Overview of credit-based shaper operation |
1944 | L.2 “Class measurement intervals” in Bridges |
1945 | L.3 Determining worst-case latency contribution and buffering requirements |
1946 | L.3.1 Interference delay L.3.1.1 Queuing delay |
1951 | L.3.1.2 Fan-in delay |
1952 | L.3.1.3 Permanent delay |
1954 | L.3.2 Maximum interference delay and maximum buffer requirement |
1955 | L.4 Operation of credit-based shaper in Coordinated Shared Network (CSN) |
1956 | Annex M (normative) Support for PFC in link layers without MAC Control M.1 Overview M.2 PFC PDU format |
1957 | Annex N (informative) Buffer requirements for PFC N.1 Overview N.2 Delay model |
1960 | N.3 Interface Delay N.4 Cable Delay |
1961 | N.5 Higher Layer Delay N.6 Computation example |
1962 | Annex O (informative) Preserving the integrity of FCS fields in MAC Bridges O.1 Background |
1963 | O.2 Basic mathematical ideas behind CRC and FCS |
1964 | O.3 Detection Lossless Circuit approach |
1965 | O.4 Algorithmic modification of an FCS O.4.1 Data changed, length unchanged |
1966 | O.4.2 Length changed, original data unchanged |
1967 | O.4.3 Preservation of detectability |
1968 | O.5 Conclusions |
1969 | Annex P (informative) Frame duplication and misordering P.1 Background P.2 Frame duplication |
1970 | P.3 Frame misordering |
1971 | P.4 Other considerations |
1972 | Annex Q (informative) Traffic scheduling Q.1 Motivation |
1973 | Q.2 Using gate operations to create protected windows |
1974 | Q.3 Availability of PTP Q.4 Scheduled traffic and end stations Q.5 CycleTimeExtension variables |
1976 | Annex R (informative) Preemption and IEEE 802.1AE MAC Security |
1978 | Annex S (informative) Preemption and scheduled traffic S.1 Scheduling used in isolation S.2 Preemption used in isolation |
1979 | S.3 Scheduling and preemption used in combination, no HOLD/RELEASE S.4 Scheduling and preemption used in combination with HOLD/RELEASE |
1980 | S.5 Bandwidth allocation and express traffic |
1981 | Annex T (informative) Cyclic queuing and forwarding T.1 Overview of CQF |
1982 | T.2 An approach to CQF implementation |
1983 | T.3 Use of per-stream filtering and policing for CQF T.3.1 Stream filter configuration |
1984 | T.3.2 Stream gate configuration T.4 Use of traffic scheduling for CQF |
1985 | T.5 Timing considerations T.5.1 Choice of T |
1987 | T.5.2 Cycle interleaving |
1988 | T.5.3 Cycle alignment between adjacent Ports |
1989 | Annex U (informative) Bibliography |
1993 | Back cover |