IEEE C37.60 2003
$82.92
(Replaced) IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV
| Published By | Publication Date | Number of Pages |
| IEEE | 2003 | 71 |
Revision Standard – Inactive – Superseded. IEEE Std C37.60-2003, IEEE Standard for Overhead, Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Cover |
| 2 | IEEE Standard for Overhead, Pad-Mounted, Dry Vault… |
| 4 | Introduction |
| 5 | Participants Contents |
| 7 | 1. Scope |
| 11 | 2. References |
| 12 | 3. Definitions |
| 13 | 4. Service conditions 4.1 Usual service conditions 4.2 Unusual service conditions |
| 14 | 5. Rating 5.1 Rating information 5.2 Rated maximum voltage |
| 15 | 5.3 Rated power-frequency |
| 16 | 5.4 Rated continuous current 5.5 Rated minimum tripping current… |
| 17 | 5.6 Rated symmetrical interrupting current |
| 18 | 5.7 Rated symmetrical making current 5.8 Rated lightning impulse withstand voltage 5.9 Rated control voltage and ranges |
| 19 | 5.10 Rated line and cable charging interrupting currents (where applicable) |
| 24 | 6. Design tests (type tests) 6.1 General |
| 25 | 6.2 Insulation (dielectric) tests |
| 27 | 6.3 Switching tests 6.4 Making current capability |
| 30 | 6.5 Rated symmetrical interrupting current tests |
| 41 | 6.6 Minimum tripping current tests |
| 42 | 6.7 Partial discharge (corona) tests |
| 43 | 6.8 Radio influence voltage tests (RIV) 6.9 Surge current test; series-trip reclosers/FIs |
| 45 | 6.10 Temperature rise test |
| 47 | 6.11 Time-current tests |
| 48 | 6.12 Mechanical duty test 6.13 Control electronic elements surge withstand capability (SWC) tests |
| 50 | 6.14 Condition of recloser/FI after each test of… |
| 51 | 7. Production tests (routine tests) |
| 52 | 7.1 Reclosing and overcurrent trip calibration 7.2 Control, secondary wiring, and accessory devices check tests 7.3 Dielectric withstand test; 1-min. dry power-frequency 7.4 Partial discharge test 7.5 Mechanical operations tests |
| 53 | 7.6 Water leak test 8. Field tests on units in service, including dc… |
| 54 | 9. Construction requirements 9.1 Tank construction: submersible or dry vault reclosers/FIs 9.2 Grounding provisions |
| 55 | 9.3 Insulating medium quantity indicators 9.4 Oil sampling provision (submersible reclosers/FIs) 9.5 Manual operating provision 9.6 Position indicator 9.7 Nameplate markings |
| 56 | 9.8 Stored energy mechanism charge indicator 9.9 Enclosure integrity 9.10 Counters 9.11 Conductor terminal sizes 9.12 Tank construction-pressurized reclosers/FIs only |
| 57 | Annex A (informative) X/R Ratios A.1 Time constant (tau cc) and X/R ratio A.2 Asymmetrical fault current Annex B (informative) |
| 59 | Simulated surge arrester operation tests |
| 62 | Annex C (normative) Method of drawing the envelope of the prospective transient recovery C.1 Introduction C.2 Drawing the envelope |
| 63 | C.3 Determination of parameters |
| 64 | Annex D (informative) Background basis of recloser TRV values |
| 66 | D.1 Uc=The TRV peak D.2 RRRV=The rate of rise of recovery voltage D.3 t3=The time to reach Uc at the specified RRRV |
| 67 | D.4 Multipliers for TRV values at currents less than |
| 68 | Annex E (informative) Altitude correction factors E.1 Introduction E.2 Altitude correction factors |
| 70 | E.3 Examples for switchgear with… E.4 Examples for switchgear ratings based on… |
| 71 | Annex F (informative) Bibliography |
Related products
-
IEEE C37.90 2006
IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus Published By Publication…
-
IEEE C37.90-2005
IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus (Inactive Reserved) Published…
-
IEEE C37.66 2006
IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV) Published…
-
IEEE C37.32 2002 2003
American National Standard for High Voltage Switches, Bus Supports, and Accessories Schedules of Preferred Ratings,…
-
IEEE C37.110-2023
IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes (Published) Published…
-
IEEE C37.68-2023
IEEE Standard for Design, Test, and Application Requirements for Microprocessor-Based Controls of Distribution Pad-mount, Dry…
-
IEEE C37.23-2003
IEEE Standard for Metal-Enclosed Bus Published By Publication Date Number of Pages IEEE 2003 57
-
IEEE C37.60-2003
IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and…
-
IEEE C37.60-2003 2004
IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and…
-
IEEE C37.63-2013(Redline)
IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current…
-
IEEE C37.06-2009
IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis–Preferred Ratings and…
-
IEEE C37.63 2013
IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current…
-
IEEE C37.104 2003
IEEE Guide for Automatic Reclosing of Line Circuit Breakers for AC Distribution and Transmission Lines…
-
IEEE C37.22 2003
American National Standard Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used…
-
IEEE C37.40-2003
IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse…
-
IEEE C37.68-2023
IEEE Standard for Design, Test, and Application Requirements for Microprocessor-Based Controls of Distribution Pad-mount, Dry…
-
IEEE C37.94 2003
IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and…
-
IEEE ANSI C37.06 2003
American National Standard for AC High-Voltage Circuit Breakers – Rated on a Symmetrical Current Basis…
-
IEEE C37.110-2023
IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes (Approved Draft)…
-
IEEE C37.06 2009
IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis–Preferred Ratings and…
-
IEEE C37.63-2005
IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems…
-
IEEE C37.63-2013(Redline)
IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current…
-
IEEE C37.06-2009
IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis–Preferred Ratings and…
-
IEEE C37.06-2009
IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis–Preferred Ratings and…
-
IEEE C37.63 2005
IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems…
-
IEEE C37.40 2004
IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse…
-
IEEE C37.68-2023
IEEE Standard for Design, Test, and Application Requirements for Microprocessor-Based Controls of Distribution Pad-mount, Dry…
-
IEEE C37.60 2003 Cor1 2004 2005
IEEE Standard Requirements for Overhead Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault…
-
IEEE C37.68-2023
IEEE Standard for Design, Test, and Application Requirements for Microprocessor-Based Controls of Distribution Pad-mount, Dry…
-
IEEE C37.63-2013
IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current…
-
IEEE C37.68-2023
IEEE Standard for Design, Test, and Application Requirements for Microprocessor-Based Controls of Distribution Pad-mount, Dry…
-
IEEE C37.74-2003
IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for…
-
IEEE C37.59 2003
IEEE Standard Requirements for Conversion of Power Switchgear Equipment Published By Publication Date Number of…
-
IEEE C37.66-2005
IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV) Published…
-
IEEE C37.40-2003
IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse…
-
IEEE C37.68-2023
IEEE Standard for Design, Test, and Application Requirements for Microprocessor-Based Controls of Distribution Pad-mount, Dry…
-
IEEE C37.63-2013
IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current…
-
IEEE C37.14 2003
IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures Published By Publication Date…
-
IEEE C37.74 2003
IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for…
-
IEEE C37.95 2003
Guide for Protective Relaying of Utility-Consumer Interconnections Published By Publication Date Number of Pages IEEE…
