IEEE C57.12.01-2005
$62.83
Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin Encapsulated Windings
| Published By | Publication Date | Number of Pages |
| IEEE | 2005 | 44 |
Revision Standard – Superseded. Electrical, mechanical, and safety requirements of ventilated, non-ventilated, and sealed dry-type distribuion and power transformers or auto transformers (single and polyphase, with a voltage of 601 V or higher in the highest voltage winding) are described.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | IEEE Std C57.12.01-2005 Cover |
| 3 | IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers, Including Those with Solid-Cast and/or Resin Encapsulated Windings |
| 6 | Introduction |
| 7 | Notice to users Errata Interpretations Patents Participants |
| 10 | Contents |
| 13 | IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers, Including Those with Solid-Cast and/or Resin Encapsulated Windings 1. Overview 1.1 Scope 1.2 Purpose |
| 14 | 1.3 Word usage 2. Normative references |
| 15 | 3. Definitions 4. Service conditions 4.1 Usual service conditions |
| 16 | 4.2 Unusual service conditions |
| 18 | 5. Rating data 5.1 Cooling classes of transformers |
| 19 | 5.2 Frequency 5.3 Phases 5.4 Rated power |
| 20 | 5.5 Voltage rating and taps 5.6 Connections |
| 21 | 5.7 Polarity, angular displacement, and terminal marks |
| 22 | 5.8 Impedance 5.9 Losses 5.10 Insulation levels |
| 26 | 5.11 Temperature rise and insulation-system capability |
| 30 | 5.12 Nameplates |
| 34 | 6. Construction 6.1 Tank-pressure requirements 6.2 Finish of tank or enclosure 6.3 Handling provisions 6.4 Transformer accessories 6.5 Terminals 6.6 Grounding |
| 35 | 6.7 Shipping 7. Short-circuit characteristics 7.1 General 7.2 Transformer categories 7.3 Short-circuit current duration and magnitude |
| 38 | 7.4 System zero-sequence data |
| 39 | 7.5 Application conditions requiring special consideration 7.6 Components 7.7 Base power rating of a winding |
| 40 | 7.8 Effects of temperature on transformer windings during short- 7.9 Temperature limits of transformer for short-circuit conditio 7.10 Calculation of winding temperature during a short circuit |
| 42 | 8. Testing and calculations 8.1 General 8.2 Test classifications 8.3 Routine, design, and other tests for transformers |
| 43 | 8.4 Calculations 9. Tolerances 9.1 Ratio |
| 44 | 9.2 Impedance 9.3 Losses 10. Connection of transformers for shipment |
Related products
-
IEEE C57.12.24 2009
IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19…
-
IEEE C57.12.38 2009
IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers; High Voltage, 34 500 GrdY/19 920 V…
-
IEEE C57.12.59 2002
IEEE Guide for Dry-Type Transformer Through-Fault Current Duration Published By Publication Date Number of Pages…
-
IEEE C57.12.60-2009:2013 Edition
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution…
-
IEEE C57.12.00-2006
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers Published By Publication Date…
-
IEEE C57.12.40 2006
Standard for Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid-Immersed) Published By Publication…
-
IEEE C57.12.35 2007
IEEE Standard for Bar Coding for Distribution Transformers and Step-Voltage Regulators Published By Publication Date…
-
IEEE C57.12.01 2015
IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers Published By Publication Date…
-
IEEE C57.12.36-2007
IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers Published By Publication Date Number of Pages…
-
IEEE C57.12.28 2005
Standard for Pad Mounted Equipment – Enclosure Integrity Published By Publication Date Number of Pages…
-
IEEE C57.12.20-2005
Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34500 Volts and…
-
IEEE STD C57.12.01 2005:2006 Edition
IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers, Including Those With Solid-Cast And/Or…
-
IEEE C57.12.31-2002
IEEE Standard for Pole Mounted Equipment – Enclosure Integrity Published By Publication Date Number of…
-
IEEE C57.12.44-2005
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEE…
-
IEEE C57.12.20 2005
Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34500 Volts and…
-
IEEE C57.19.01-2000
IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings Published By Publication Date Number…
-
IEEE C57.12.00-2000
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers Published By Publication Date…
-
IEEE C57.12.34 2005
Standard for Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase DistributionTransformers, 2500 kVA and Smaller: High-Voltage, 34…
-
IEEE C57.12.91-2001
IEEE Standard Test Code for Dry-Type Distribution and Power Transformers Published By Publication Date Number…
-
IEEE C57.12.90-2015
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers (Superseded Redline) Published By…
-
IEEE C57.12.28-2005
IEEE Standard for Pad-Mounted Equipment – Enclosure Integrity Published By Publication Date Number of Pages…
-
IEEE C57.12.60-2009
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution…
-
IEEE C57.12.32-2002
IEEE Standard for Submersible Equipment – Enclosure Integrity Published By Publication Date Number of Pages…
-
IEEE C57.12.90-2015
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers (Superseded Redline) Published By…
-
IEEE C57.12.34-2009
IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 5 MVA and Smaller; High…
-
IEEE C57.12.91 2001
IEEE Standard Test Code for Dry-Type Distribution and Power Transformers Published By Publication Date Number…
-
IEEE C57.12.40-2006
IEEE Standard for Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid-Immersed) Published By…
-
IEEE C57.12.34-2015(Redline)
IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage,…
-
IEEE C57.12.01 2006
Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or…
-
IEEE C57.12.36 2008
IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers Published By Publication Date Number of Pages…
-
IEEE C57.12.44 2006
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEE…
-
IEEE C57.12.51-2008
IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-…
-
IEEE C57.19.00 2005
IEEE Standard General Requirements and Test Procedure for Power Apparatus Bushings Published By Publication Date…
-
IEEE C57.19.00-2004
IEEE Standard General Requirements and Test Procedure for Power Apparatus Bushings Published By Publication Date…
-
IEEE C57.12.00 2000
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers Published By Publication Date…
-
IEEE C57.12.29-2005
IEEE Standard for Pad Mounted Equipment – Enclosure Integrity for Coastal Environments Published By Publication…
-
IEEE C57.12.31 2003
IEEE Standard for Pole Mounted Equipment – Enclosure Integrity Published By Publication Date Number of…
-
IEEE C57.12.51 2009
IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-…
-
IEEE C57.12.00 2007
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers Published By Publication Date…
-
IEEE C57.12.29 2005
Standard for Pad Mounted Equipment – Enclosure Integrity for Coastal Environments Published By Publication Date…
