IEEE C57.12.23-1992
$73.67
IEEE Standard for Transformers–Underground-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable, Insulated, High-Voltage Connectors; High Voltage (24 940 GrdY/14 400 V and Below) and Low-Voltage (240/120 V, 167 kVA and Smaller)
| Published By | Publication Date | Number of Pages |
| IEEE | 1992 | 15 |
New IEEE Standard – Superseded. Electrical, dimensional, and mechanical characteristics and certain safety features of single-phase, 60 Hz, mineral-oil-immersed, self-cooled, distribution transformers with separable insulated high-voltage connectors are covered. Ratings, testing, and construction are discussed. These transformers are generally used for step-down purposes from an underground primary cable supply and are suitable for occasional submerged operation. The intent is to provide a basis for determining their performance, interchangeability, and safety, and for their selection. This standard does not cover the electrical and mechanical requirements of accessory devices that may be supplied with the transformer
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Title Page |
| 3 | Introduction Participants |
| 5 | CONTENTS |
| 7 | 1. Introduction 1.1 Scope 1.2 Purpose 1.3 General 2. References |
| 8 | 3. Ratings 3.1 Kilovoltampere Ratings 3.2 Voltage Ratings and Tap Ratings |
| 9 | 4. Basic Lightning Impulse Insulation Levels and Dielectric Test Levels 5. Tests 5.1 General 5.2 Dielectric Tests |
| 10 | 6. Construction 6.1 General |
| 12 | 6.2 Connectors and Terminals |
| 14 | 6.3 Instruction Nameplate 6.4 Oil Preservation 6.5 Tanks |
| 15 | 6.6 Components for Looped Primary Cable System 7. Storage and Installation 7.1 Storage 7.2 Installation |
Related products
-
IEEE C57.12.23-1992
IEEE Standard for Transformers–Underground-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable, Insulated, High-Voltage Connectors; High Voltageā¦
-
IEEE C57.12.00 1993
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power and Regulating Transformers Published By Publication Dateā¦
-
IEEE C57.12.90 1993
IEEE Standard Test Code for Liquid-Immersed Distribution, Power and Regulating Transformers and IEEE Guide forā¦
-
IEEE C57.12.10 1997
Standard Requirements for Liquid-Immersed Power Transformers Published By Publication Date Number of Pages IEEE 1997ā¦
-
IEEE C57.12.35 1996
IEEE Standard for Bar Coding for Distribution Transformers Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.58 1991
IEEE Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil Published Byā¦
-
IEEE C57.123 2002
IEEE Guide for Transformer Loss Measurement Published By Publication Date Number of Pages IEEE 2002ā¦
-
IEEE C57.12.01 1998
IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Castā¦
-
IEEE C57.19.03-1996:2005 Edition
IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications Published By Publicationā¦
-
IEEE C57.12.35-1996
IEEE Standard for Bar Coding for Distribution Transformers Published By Publication Date Number of Pagesā¦
-
IEEE C57.19.03 1996 Cor1 2006
IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications – Corrigendum 1ā¦
-
IEEE C57.134 2000
IEEE Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers Published By Publication Date Numberā¦
-
IEEE C57.19.03-1996
IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications Published By Publicationā¦
-
IEEE C57.12.26-1992
IEEE Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltageā¦
-
IEEE C57.12.44 1994
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEEā¦
-
IEEE C57.12.00-1993
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power and Regulating Transformers Published By Publication Dateā¦
-
IEEE C57.12.01-1998
IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Castā¦
-
IEEE C57.12.90-1993
IEEE Standard Test Code for Liquid-Immersed Distribution, Power and Regulating Transformers and IEEE Guide forā¦
-
IEEE C57.19.03 1996:1997 Edition
IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications Published By Publicationā¦
-
IEEE C57.13.2 1992
IEEE Standard Conformance Test Procedures for Instrument Transformers Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.23 1992
IEEE Standard for Transformers–Underground-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable, Insulated, High-Voltage Connectors; High Voltageā¦
-
IEEE C57.12.90 1999
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers Published By Publication Dateā¦
-
IEEE C57.12.90 1988
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers and IEEE Guide forā¦
-
IEEE C57.12.91-1995
IEEE Standard Test Code for Dry-Type Distribution and Power Transformers Published By Publication Date Numberā¦
-
IEEE C57.12.60 1993
IEEE Trial-Use Standard Test Procedures for Thermal Evaluation of Insulation Systems for Solid-Cast and Resin-Encapsulatedā¦
-
IEEE C57.12.60 2010
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distributionā¦
-
IEEE C57.12.28 1999
American National Standard pad-mounted equipment – enclosure integrity Published By Publication Date Number of Pagesā¦
-
IEEE C57.12.60-2009
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distributionā¦
-
IEEE C57.12.60 1998
IEEE Guide for Test Procedures for Thermal Evaluation of Insulation Systems for Solid Cast andā¦
-
IEEE ANSI C57.12.22 1993
American National Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVAā¦
-
IEEE C57.12.14 1982
IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltagesā¦
-
IEEE C57.12.14-1982
IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltagesā¦
-
IEEE C57.12.90-1987
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers and IEEE Guide forā¦
-
IEEE C57.12.91 1996
IEEE Standard Test Code for Dry-Type Distribution and Power Transformers Published By Publication Date Numberā¦
-
IEEE ANSI C57.12.29 1991
American National Standard for Switchgear and Transformers – Pad-Mounted Equipment- Enclosure Integrity for Coastal Environmentsā¦
-
IEEE C57.12.44-1994
IEEE Standard Requirements for Secondary Network Protectors Published By Publication Date Number of Pages IEEEā¦
-
IEEE C57.12.60-1992
IEEE Trial-Use Standard Test Procedures for Thermal Evaluation of Insulation Systems for Solid-Cast and Resin-Encapsulatedā¦
-
IEEE C57.12.26 1992
IEEE Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltageā¦
-
IEEE C57.12.90-1999
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers Published By Publication Dateā¦
