IL ChicagoBuildingRehabilitationCode 2019
$46.58
Chicago Building Rehabilitation Code, Title 14R – with April 2022 Supplement
Published By | Publication Date | Number of Pages |
IL | 2019 | 291 |
The Chicago Building Rehabilitation Code,Title 14R regulates the repair, alteration, change of occupancy, addition to, and relocation of existing buildings and structures. The accessibility-related provisions of this code have been drafted to be consistent with the 2018 Illinois Accessibility Code and federal regulations for privately-funded construction. Effective December 1, 2019
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | 2018 CHICAGO CONSTRUCTION CODES BUILDING REHABILITATION CODE TITLE 14R |
2 | COPYRIGHT |
3 | COPYRIGHT FOR THE APRIL 2022 SUPPLEMENT |
4 | CITY OF CHICAGO OFFICE OF MAYOR MAYOR’S MESSAGE |
5 | CITY OF CHICAGO DEPARTMENT OF BUILDINGS COMMISSIONER’S MESSAGE |
6 | ABOUT THE CHICAGO CONSTRUCTION CODES |
10 | ACKNOWLEDGMENTS |
18 | PREFACE TO THE MODEL CODE |
20 | EFFECTIVE USE OF THE CHICAGO BUILDING REHABILITATION CODE |
24 | TABLE OF CONTENTS |
26 | TABLE OF SUPPLEMENTED PROVISIONS MARCH 2021 |
28 | CHAPTER 1 SCOPE AND PURPOSE SECTION 101 GENERAL |
30 | APRIL 2022 SUPPLEMENT TO CHAPTER 1 SCOPE AND PURPOSE |
31 | SECTION 101 GENERAL |
33 | CHAPTER 2 DEFINITIONS SECTION 201 GENERAL SECTION 202 GENERAL DEFINITIONS |
37 | APRIL 2022 SUPPLEMENT TO CHAPTER 2 DEFINITIONS |
38 | SECTION 202 GENERAL DEFINITIONS |
40 | CHAPTER 3 PROVISIONS FOR ALL COMPLIANCE METHODS SECTION 301 ADMINISTRATION SECTION 302 GENERAL PROVISIONS |
41 | SECTION 303 STRUCTURAL DESIGN LOADS AND EVALUATION AND DESIGN PROCEDURES TABLE 303.3.1 PERFORMANCE OBJECTIVES FOR USE IN ASCE 41 FOR COMPLIANCE WITH FULL SEISMIC FORCES SECTION 304 IN-SITU LOAD TESTS SECTION 305 ACCESSIBILITY FOR EXISTING BUILDINGS |
42 | TABLE 303.3.2 PERFORMANCE OBJECTIVES FOR USE IN ASCE 41 FOR COMPLIANCE WITH REDUCED SEISMIC FORCES |
43 | TABLE 305.8.5 RAMPS |
44 | SECTION 306 REROOFING |
45 | SECTION 307 FIRE ESCAPES |
46 | SECTION 308 ELECTRICAL SECTION 309 RESIDENTIAL OCCUPANCIES |
47 | TABLE 309.1.1 .MAXIMUM NUMBER OF STORIES ABOVE GRADE PLANE |
48 | APRIL 2022 SUPPLEMENT TO CHAPTER 3 PROVISIONS FOR ALL COMPLIANCE METHODS |
49 | SECTION 302 GENERAL PROVISIONS SECTION 303 STRUCTURAL DESIGN LOADS AND EVALUATION AND DESIGN PROCEDURES SECTION 305 ACCESSIBILITY FOR EXISTING BUILDINGS |
50 | SECTION 306 REROOFING |
51 | SECTION 309 RESIDENTIAL OCCUPANCIES TABLE 309.1.1 MAXIMUM NUMBER OF STORIES ABOVE GRADE PLANE |
53 | CHAPTER 4 REPAIRS SECTION 401 GENERAL SECTION 402 BUILDING ELEMENTS AND MATERIALS SECTION 403 FIRE PROTECTION SECTION 404 MEANS OF EGRESS SECTION 405 STRUCTURAL |
54 | SECTION 406 ELECTRICAL SECTION 407 MECHANICAL |
55 | SECTION 408 PLUMBING SECTION 409 LIGHT AND VENTILATION |
57 | APRIL 2022 SUPPLEMENT TO CHAPTER 4 REPAIRS |
58 | SECTION 402 BUILDING ELEMENTS AND MATERIALS SECTION 405 STRUCTURAL SECTION 409 LIGHT AND VENTILATION |
60 | CHAPTER 5 PRESCRIPTIVE COMPLIANCE METHOD SECTION 501 GENERAL SECTION 502 ADDITIONS |
61 | SECTION 503 ALTERATIONS |
62 | SECTION 504 FIRE ESCAPES |
63 | SECTION 505 [RESERVED] SECTION 506 CHANGE OF OCCUPANCY SECTION 507 HISTORIC BUILDINGS |
64 | APRIL 2022 SUPPLEMENT TO CHAPTER 5 PRESCRIPTIVE COMPLIANCE METHOD |
65 | SECTION 502 ADDITIONS SECTION 503 ALTERATIONS SECTION 507 [RESERVED] |
67 | CHAPTER 6 CLASSIFICATION OF WORK SECTION 601 GENERAL SECTION 602 ALTERATIONâLEVEL 1 SECTION 603 ALTERATIONâLEVEL 2 SECTION 604 ALTERATIONâLEVEL 3 SECTION 605 CHANGE OF OCCUPANCY SECTION 606 ADDITIONS |
68 | SECTION 607 HISTORIC BUILDINGS SECTION 608 RELOCATED BUILDINGS |
69 | CHAPTER 7 ALTERATIONSâLEVEL 1 SECTION 701 GENERAL SECTION 702 BUILDING ELEMENTS AND MATERIALS |
70 | SECTION 703 FIRE PROTECTION SECTION 704 MEANS OF EGRESS SECTION 705 REROOFING SECTION 706 STRUCTURAL SECTION 707 ENERGY CONSERVATION |
71 | APRIL 2022 SUPPLEMENT TO CHAPTER 7 ALTERATIONSâLEVEL 1 |
72 | SECTION 702 BUILDING ELEMENTS AND MATERIALS |
74 | CHAPTER 8 ALTERATIONSâLEVEL 2 SECTION 801 GENERAL SECTION 802 BUILDING ELEMENTS AND MATERIALS |
76 | SECTION 803 FIRE PROTECTION |
77 | SECTION 804 CARBON MONOXIDE DETECTION |
78 | SECTION 805 MEANS OF EGRESS |
81 | SECTION 806 STRUCTURAL SECTION 807 ELECTRICAL |
82 | SECTION 808 MECHANICAL SECTION 809 PLUMBING SECTION 810 ENERGY CONSERVATION |
84 | APRIL 2022 SUPPLEMENT TO CHAPTER 8 ALTERATIONSâLEVEL 2 |
85 | SECTION 801 GENERAL SECTION 802 BUILDING ELEMENTS AND MATERIALS |
87 | SECTION 803 FIRE PROTECTION |
88 | SECTION 804 CARBON MONOXIDE DETECTION SECTION 805 MEANS OF EGRESS |
90 | TABLE 805.6 MAXIMUM LENGTH OF DEAD-END CORRIDORS (feet) |
91 | SECTION 806 STRUCTURAL |
92 | SECTION 807 ELECTRICAL SECTION 808 MECHANICAL SECTION 809 PLUMBING SECTION 810 ENERGY CONSERVATION |
93 | CHAPTER 9 ALTERATIONSâLEVEL 3 SECTION 901 GENERAL SECTION 902 SPECIAL USE AND OCCUPANCY SECTION 903 BUILDING ELEMENTS AND MATERIALS SECTION 904 FIRE PROTECTION |
94 | SECTION 905 MEANS OF EGRESS SECTION 906 STRUCTURAL |
95 | SECTION 907 ENERGY CONSERVATION |
97 | APRIL 2022 SUPPLEMENT TO CHAPTER 9 ALTERATIONSâLEVEL 3 |
98 | SECTION 902 SPECIAL USE AND OCCUPANCY SECTION 903 BUILDING ELEMENTS AND MATERIALS SECTION 904 FIRE PROTECTION |
99 | SECTION 905 MEANS OF EGRESS |
100 | CHAPTER 10 CHANGE OF OCCUPANCY SECTION 1001 GENERAL SECTION 1002 CREATION OF INCIDENTAL USES AND SPECIAL USES OCCUPANCIES SECTION 1003 [RESERVED] SECTION 1004 [RESERVED] SECTION 1005 [RESERVED] SECTION 1006 STRUCTURAL |
101 | SECTION 1007 ELECTRICAL SECTION 1008 MECHANICAL SECTION 1009 PLUMBING SECTION 1010 LIGHT AND VENTILATION SECTION 1011 CHANGE OF OCCUPANCY |
102 | TABLE 1011.4 MEANS OF EGRESS HAZARD CATEGORIES |
103 | TABLE 1011.5 HEIGHTS AND AREAS HAZARD CATEGORIES TABLE 1011.6 EXPOSURE OF EXTERIOR WALLS HAZARD CATEGORIES |
106 | APRIL 2022 SUPPLEMENT TO CHAPTER 10 CHANGE OF OCCUPANCY |
107 | SECTION 1001 GENERAL SECTION 1002 CREATION OF INCIDENTAL USES AND SPECIAL USES AND OCCUPANCIES SECTION 1006 STRUCTURAL SECTION 1011 CHANGE OF OCCUPANCY |
111 | CHAPTER 11 ADDITIONS SECTION 1101 GENERAL SECTION 1102 HEIGHTS AND AREAS SECTION 1103 STRUCTURAL |
112 | SECTION 1104 SMOKE ALARMS IN OCCUPANCY GROUPS R AND I-1 SECTION 1105 CARBON MONOXIDE ALARMS IN GROUPS I-1, I-2, I-4 AND R SECTION 1106 [RESERVED] SECTION 1107 ENERGY CONSERVATION |
113 | APRIL 2022 SUPPLEMENT TO CHAPTER 11 ADDITIONS |
114 | SECTION 1102 HEIGHTS AND AREAS SECTION 1105 CARBON MONOXIDE ALARMS IN GROUPS E, I-1, I-2, I-4 AND R |
116 | CHAPTER 12 HISTORIC BUILDINGS SECTION 1201 GENERAL SECTION 1202 REPAIRS SECTION 1203 FIRE SAFETY |
117 | SECTION 1204 CHANGE OF OCCUPANCY |
118 | SECTION 1205 STRUCTURAL SECTION 1206 RELOCATED BUILDINGS |
120 | APRIL 2022 SUPPLEMENT TO CHAPTER 12 HISTORIC BUILDINGS |
121 | SECTION 1201 GENERAL SECTION 1203 FIRE SAFETY SECTION 1204 CHANGE OF OCCUPANCY SECTION 1205 STRUCTURAL |
123 | CHAPTER 13 PERFORMANCE COMPLIANCE METHODS SECTION 1301 GENERAL |
124 | EQUATION 13-1 EQUATION 13-2 |
125 | EQUATION 13-3 EQUATION 13-4 TABLE 1301.6.3 COMPARTMENTATION VALUES TABLE 1301.6.4 SEPARATION VALUES |
126 | TABLE 1301.6.5 CORRIDOR WALL VALUES TABLE 1301.6.6(1) VERTICAL OPENING PROTECTION VALUE TABLE 1301.6.6(2) CONSTRUCTION-TYPE FACTOR EQUATION 13-5 |
127 | TABLE 1301.6.8 AUTOMATIC FIRE DETECTION VALUES TABLE 1301.6.9 FIRE ALARM SYSTEM VALUES TABLE 1301.6.10 SMOKE CONTROL VALUES |
128 | TABLE 1301.6.11 MEANS OF EGRESS VALUESa TABLE 1301.6.12 DEAD-END VALUES |
129 | EQUATION 13-6 TABLE 1301.6.14 ELEVATOR CONTROL VALUES TABLE 1301.6.15 MEANS OF EGRESS EMERGENCY LIGHTING VALUES TABLE 1301.6.16 MIXED OCCUPANCY VALUESa |
130 | TABLE 1301.6.17 SPRINKLER SYSTEM VALUES TABLE 1301.6.18 STANDPIPE SYSTEM VALUES TABLE 1301.6.19 INCIDENTAL USE AREA VALUES |
131 | TABLE 1301.8 MANDATORY SAFETY SCORESa |
132 | TABLE 1301.7 SUMMARY SHEETâBUILDING CODE |
133 | APRIL 2022 SUPPLEMENT TO CHAPTER 13 PERFORMANCE COMPLIANCE METHODS |
134 | SECTION 1301 GENERAL |
135 | TABLE 1301.6.4 SEPARATION VALUES TABLE 1301.6.11 MEANS OF EGRESS VALUES TABLE 1301.8 MANDATORY SAFETY SCORESa |
136 | CHAPTER 14 RELOCATED OR MOVED BUILDINGS SECTION 1401 GENERAL SECTION 1402 REQUIREMENTS |
138 | CHAPTER 15 WORK SITE SAFETY AND OPERATIONS SECTION 1501 GENERAL |
140 | CHAPTER 16 REFERENCED STANDARDS SECTION 1601 REFERENCED STANDARDS |
142 | CHAPTER 17 APPENDICES AND RESOURCES APPENDICES A THROUGH C [RESERVED] RESOURCE A GUIDELINES ON FIRE RATINGS OF ARCHAIC MATERIALS AND ASSEMBLIES |
143 | RESOURCE A GUIDELINES ON FIRE RATINGS OF ARCHAIC MATERIALS AND ASSEMBLIES INTRODUCTION PURPOSE |
144 | 1 FIRE-RELATED PERFORMANCE OF ARCHAIC MATERIALS AND ASSEMBLIES 1.1 FIRE PERFORMANCE MEASURES |
145 | 1.2 COMBUSTIBLE CONSTRUCTION TYPES 2 BUILDING EVALUATION 2.1 PRELIMINARY EVALUATION |
146 | FIGURE 1 PRELIMINARY EVALUATION FIELD NOTES |
147 | FIGURE 2 PRELIMINARY EVALUATION WORKSHEET |
148 | 2.2 FIRE RESISTANCE OF EXISTING BUILDING ELEMENTS 2.3 EFFECTS OF PENETRATIONS IN FIRE RESISTANT ASSEMBLIES 3 FINAL EVALUATION AND DESIGN SOLUTION |
149 | 3.1 THE EXPERIMENTAL APPROACH 3.2 THE THEORETICAL APPROACH HARMATHY’S TEN RULES |
151 | ILLUSTRATION OF HARMATHYâS RULES EXAMPLE APPLICATION OF HARMATHYâS RULES |
153 | 3.3â THICKNESS DESIGNâ STRATEGY 3.4 EVALUATION OF DOORS |
154 | FIGURE 3 MODIFICATION DETAILS |
155 | 4 SUMMARY |
156 | APPENDIX RESOURCE A TABLE OF CONTENTS |
158 | PURPOSE AND PROCEDURE |
159 | SECTION I – WALLS FIGURE 1.1.1 MASONRY WALLS 0″ TO LESS THAN 4″ THICK TABLE 1.1.1 MASONRY WALLS 0″ TO LESS THAN 4″ THICK |
160 | TABLE 1.1.1âcontinued MASONRY WALLS 0″ TO LESS THAN 4″ THICK |
161 | TABLE 1.1.1âcontinued MASONRY WALLS 0″ TO LESS THAN 4″ THICK |
162 | FIGURE 1.1.2 MASONRY WALLS 4″ TO LESS THAN 6″ THICK TABLE 1.1.2 MASONRY WALLS 4″ TO LESS THAN 6″ THICK |
163 | TABLE 1.1.2âcontinued MASONRY WALLS 4″ TO LESS THAN 6″ THICK |
164 | TABLE 1.1.2âcontinued MASONRY WALLS 4″ TO LESS THAN 6″ THICK |
165 | TABLE 1.1.2âcontinued MASONRY WALLS 4″ TO LESS THAN 6″ THICK |
166 | TABLE 1.1.2âcontinued MASONRY WALLS 4″ TO LESS THAN 6″ THICK |
167 | TABLE 1.1.2âcontinued MASONRY WALLS 4″ TO LESS THAN 6″ THICK |
168 | TABLE 1.1.2âcontinued MASONRY WALLS 4″ TO LESS THAN 6″ THICK |
169 | FIGURE 1.1.3 MASONRY WALLS 6″ TO LESS THAN 8″ THICK TABLE 1.1.3 MASONRY WALLS 6″ TO LESS THAN 8″ THICK |
170 | TABLE 1.1.3âcontinued MASONRY WALLS 6″ TO LESS THAN 8″ THICK |
171 | TABLE 1.1.3âcontinued MASONRY WALLS 6″ TO LESS THAN 8″ THICK |
172 | TABLE 1.1.3âcontinued MASONRY WALLS 6″ TO LESS THAN 8″ THICK |
173 | TABLE 1.1.3âcontinued MASONRY WALLS 6″ TO LESS THAN 8″ THICK |
174 | FIGURE 1.1.4 MASONRY WALLS 8″ TO LESS THAN 10″ THICK TABLE 1.1.4 MASONRY WALLS 8″ TO LESS THAN 10″ THICK |
175 | TABLE 1.1.4âcontinued MASONRY WALLS 8″ TO LESS THAN 10″ THICK |
176 | TABLE 1.1.4âcontinued MASONRY WALLS 8″ TO LESS THAN 10″ THICK |
177 | TABLE 1.1.4âcontinued MASONRY WALLS 8″ TO LESS THAN 10″ THICK |
178 | TABLE 1.1.4âcontinued MASONRY WALLS 8″ TO LESS THAN 10″ THICK |
179 | TABLE 1.1.4âcontinued MASONRY WALLS 8″ TO LESS THAN 10″ THICK |
180 | TABLE 1.1.4âcontinued MASONRY WALLS 8″ TO LESS THAN 10″ THICK |
181 | TABLE 1.1.4âcontinued MASONRY WALLS 8″ TO LESS THAN 10″ THICK |
182 | FIGURE 1.1.5 MASONRY WALLS 10″ TO LESS THAN 12″ THICK TABLE 1.1.5 MASONRY WALLS 10″ TO LESS THAN 12″ THICK |
183 | TABLE 1.1.5âcontinued MASONRY WALLS 10″ TO LESS THAN 12″ THICK |
184 | TABLE 1.1.5âcontinued MASONRY WALLS 10″ TO LESS THAN 12″ THICK |
185 | TABLE 1.1.5âcontinued MASONRY WALLS 10″ TO LESS THAN 12″ THICK |
186 | FIGURE 1.1.6 MASONRY WALLS 12″ TO LESS THAN 14″ THICK TABLE 1.1.6 MASONRY WALLS 12″ TO LESS THAN 14″ THICK |
187 | TABLE 1.1.6âcontinued MASONRY WALLS 12″ TO LESS THAN 14″ THICK |
188 | TABLE 1.1.6âcontinued MASONRY WALLS 12″ TO LESS THAN 14″ THICK |
189 | TABLE 1.1.6âcontinued MASONRY WALLS 12″ TO LESS THAN 14″ THICK |
190 | TABLE 1.1.6âcontinued MASONRY WALLS 12″ TO LESS THAN 14″ THICK |
191 | TABLE 1.1.6âcontinued MASONRY WALLS 12″ TO LESS THAN 14″ THICK |
192 | FIGURE 1.1.7 MASONRY WALLS 14″ OR MORE THICK TABLE 1.1.7 MASONRY WALLS 14″ OR MORE THICK |
193 | TABLE 1.1.7âcontinued MASONRY WALLS 14″ OR MORE THICK |
194 | TABLE 1.1.7âcontinued MASONRY WALLS 14″ OR MORE THICK |
195 | FIGURE 1.2.1 METAL FRAME WALLS 0″ TO LESS THAN 4″ THICK TABLE 1.2.1 METAL FRAME WALLS 0″ TO LESS THAN 4″ THICK |
196 | TABLE 1.2.1âcontinued METAL FRAME WALLS 0″ TO LESS THAN 4″ THICK |
197 | TABLE 1.2.1âcontinued METAL FRAME WALLS 0″ TO LESS THAN 4″ THICK |
198 | TABLE 1.2.1âcontinued METAL FRAME WALLS 0″ TO LESS THAN 4″ THICK |
199 | FIGURE 1.2.2 METAL FRAME WALLS 4″ TO LESS THAN 6″ THICK TABLE 1.2.2 METAL FRAME WALLS 4″ TO LESS THAN 6″ THICK |
200 | TABLE 1.2.2âcontinued METAL FRAME WALLS 4″ TO LESS THAN 6″ THICK |
201 | TABLE 1.2.3 METAL FRAME WALLS 6″ TO LESS THAN 8″ THICK |
202 | TABLE 1.2.4 METAL FRAME WALLS 8″ TO LESS THAN 10″ THICK |
203 | TABLE 1.3.1 WOOD FRAME WALLS 0″ TO LESS THAN 4″ THICK |
204 | FIGURE 1.3.2 WOOD FRAME WALLS 4″ TO LESS THAN 6″ THICK TABLE 1.3.2 WOOD FRAME WALLS 4″ TO LESS THAN 6″ THICK |
205 | TABLE 1.3.2âcontinued WOOD FRAME WALLS 4″ TO LESS THAN 6″ THICK |
206 | TABLE 1.3.2âcontinued WOOD FRAME WALLS 4″ TO LESS THAN 6″ THICK |
207 | TABLE 1.3.2âcontinued WOOD FRAME WALLS 4″ TO LESS THAN 6″ THICK |
208 | TABLE 1.3.2âcontinued WOOD FRAME WALLS 4″ TO LESS THAN 6″ THICK |
209 | TABLE 1.3.2âcontinued WOOD FRAME WALLS 4″ TO LESS THAN 6″ THICK |
210 | TABLE 1.3.2âcontinued WOOD FRAME WALLS 4″ TO LESS THAN 6″ THICK |
211 | TABLE 1.3.2âcontinued WOOD FRAME WALLS 4″ TO LESS THAN 6″ THICK |
212 | TABLE 1.3.3 WOOD FRAME WALLS 6″ TO LESS THAN 8″ THICK TABLE 1.4.1 MISCELLANEOUS MATERIALS WALLS 0″ TO LESS THAN 4″ THICK |
213 | TABLE 1.4.2 MISCELLANEOUS MATERIALS WALLS 4″ TO LESS THAN 6″ THICK |
214 | FIGURE 1.5.1 FINISH RATINGSâINORGANIC MATERIALS TABLE 1.5.1 FINISH RATINGSâINORGANIC MATERIALS |
215 | TABLE 1.5.1âcontinued FINISH RATINGSâINORGANIC MATERIALS TABLE 1.5.2 FINISH RATINGSâORGANIC MATERIALS |
216 | SECTION II COLUMNS TABLE 2.1.1 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 0″ TO LESS THAN 6″ |
217 | FIGURE 2.1.2 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 10″ TO LESS THAN 12″ TABLE 2.1.2 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 10″ TO LESS THAN 12″ |
218 | TABLE 2.1.2âcontinued REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 10″ TO LESS THAN 12″ |
219 | TABLE 2.1.2âcontinued REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 10″ TO LESS THAN 12″ |
220 | TABLE 2.1.3 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 12″ TO LESS THAN 14″ |
221 | TABLE 2.1.4 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 14″ TO LESS THAN 16″ |
222 | FIGURE 2.1.5 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 16″ TO LESS THAN 18″ TABLE 2.1.5 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 16″ TO LESS THAN 18″ |
223 | TABLE 2.1.5âcontinued REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 16″ TO LESS THAN 18″ |
224 | TABLE 2.1.6 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 18″ TO LESS THAN 20″ |
225 | FIGURE 2.1.7 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 20″ TO LESS THAN 22″ TABLE 2.1.7 REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 20″ TO LESS THAN 22″ |
226 | TABLE 2.1.7âcontinued REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 20″ TO LESS THAN 22″ TABLE 2.1.8 HEXAGONAL REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 12″ TO LESS THAN 14″ |
227 | TABLE 2.1.9 HEXAGONAL REINFORCED CONCRETE COLUMNS MINIMUM DIMENSION 14″ TO LESS THAN 16″ TABLE 2.1.10 HEXAGONAL REINFORCED CONCRETE COLUMNS DIAMETERâ16″ TO LESS THAN 18″ TABLE 2.1.11 HEXAGONAL REINFORCED CONCRETE COLUMNS DIAMETERâ20″ TO LESS THAN 22″ |
228 | TABLE 2.2 ROUND CAST IRON COLUMNS |
229 | FIGURE 2.3 STEEL COLUMNS-GYPSUM ENCASEMENTS TABLE 2.3 STEEL COLUMNSâGYPSUM ENCASEMENTS |
230 | TABLE 2.3âcontinued STEEL COLUMNSâGYPSUM ENCASEMENTS TABLE 2.4 TIMBER COLUMNS MINIMUM DIMENSION TABLE 2.5.1.1 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION LESS THAN 6ď˛ |
231 | TABLE 2.5.1.2 STEEL COLUMNSâCONCRETE ENCASEMENTS 6″ TO LESS THAN 8″ THICK |
232 | FIGURE 2.5.1.3 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 8″ TO LESS THAN 10″ TABLE 2.5.1.3 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 8″ TO LESS THAN 10″ |
233 | TABLE 2.5.1.3âcontinued STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 8″ TO LESS THAN 10″ |
234 | FIGURE 2.5.1.4 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 10″ TO LESS THAN 12″ TABLE 2.5.1.4 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 10″ TO LESS THAN 12″ |
235 | TABLE 2.5.1.4âcontinued STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 10″ TO LESS THAN 12″ |
236 | TABLE 2.5.1.4âcontinued STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 10″ TO LESS THAN 12″ |
237 | TABLE 2.5.1.4âcontinued STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 10″ TO LESS THAN 12″ |
238 | FIGURE 2.5.1.5 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 12″ TO LESS THAN 14″ TABLE 2.5.1.5 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 12″ TO LESS THAN 14″ |
239 | TABLE 2.5.1.5âcontinued STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 12″ TO LESS THAN 14″ |
240 | FIGURE 2.5.1.6 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 14″ TO LESS THAN 16″ TABLE 2.5.1.6 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 14″ TO LESS THAN 16″ |
241 | TABLE 2.5.1.6âcontinued STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 14″ TO LESS THAN 16″ |
242 | TABLE 2.5.1.7 STEEL COLUMNSâCONCRETE ENCASEMENTS MINIMUM DIMENSION 16″ TO LESS THAN 18″ TABLE 2.5.2.1 STEEL COLUMNSâBRICK AND BLOCK ENCASEMENTS MINIMUM DIMENSION 10″ TO LESS THAN 12″ |
243 | TABLE 2.5.2.2 STEEL COLUMNSâBRICK AND BLOCK ENCASEMENTS MINIMUM DIMENSION 12″ TO LESS THAN 14″ TABLE 2.5.2.3 STEEL COLUMNSâBRICK AND BLOCK ENCASEMENTS MINIMUM DIMENSION 14″ TO LESS THAN 16″ |
244 | TABLE 2.5.3.1 STEEL COLUMNSâPLASTER ENCASEMENTS MINIMUM DIMENSION 6″ TO LESS THAN 8″ TABLE 2.5.3.2 STEEL COLUMNSâPLASTER ENCASEMENTS MINIMUM DIMENSION 8″ TO LESS THAN 10″ TABLE 2.5.4.1 STEEL COLUMNSâMISCELLANEOUS ENCASEMENTS MINIMUM DIMENSION 6″ TO LESS THAN 8″ |
245 | TABLE 2.5.4.2 STEEL COLUMNSâMISCELLANEOUS ENCASEMENTS MINIMUM DIMENSION 8″ TO LESS THAN 10″ TABLE 2.5.4.3 STEEL COLUMNSâMISCELLANEOUS ENCASEMENTS MINIMUM DIMENSION 10″ TO LESS THAN 12″ TABLE 2.5.4.4 STEEL COLUMNSâMISCELLANEOUS ENCASEMENTS MINIMUM DIMENSION 12″ TO LESS THAN 14″ |
246 | SECTION III FLOOR/CEILING ASSEMBLIES FIGURE 3.1 FLOOR/CEILING ASSEMBLIESâREINFORCED CONCRETE TABLE 3.1 FLOOR/CEILING ASSEMBLIESâREINFORCED CONCRETE |
247 | TABLE 3.1âcontinued FLOOR/CEILING ASSEMBLIESâREINFORCED CONCRETE |
248 | TABLE 3.1âcontinued FLOOR/CEILING ASSEMBLIESâREINFORCED CONCRETE |
249 | TABLE 3.1âcontinued FLOOR/CEILING ASSEMBLIESâREINFORCED CONCRETE |
250 | TABLE 3.1âcontinued FLOOR/CEILING ASSEMBLIESâREINFORCED CONCRETE |
251 | TABLE 3.1âcontinued FLOOR/CEILING ASSEMBLIESâREINFORCED CONCRETE |
252 | FIGURE 3.2 FLOOR/CEILING ASSEMBLIESâSTEEL STRUCTURAL ELEMENTS TABLE 3.2 FLOOR/CEILING ASSEMBLIESâSTEEL STRUCTURAL ELEMENTS |
253 | TABLE 3.2âcontinued FLOOR/CEILING ASSEMBLIESâSTEEL STRUCTURAL ELEMENTS |
254 | TABLE 3.2âcontinued FLOOR/CEILING ASSEMBLIESâSTEEL STRUCTURAL ELEMENTS |
255 | TABLE 3.2âcontinued FLOOR/CEILING ASSEMBLIESâSTEEL STRUCTURAL ELEMENTS |
256 | TABLE 3.2âcontinued FLOOR/CEILING ASSEMBLIESâSTEEL STRUCTURAL ELEMENTS |
257 | TABLE 3.2âcontinued FLOOR/CEILING ASSEMBLIESâSTEEL STRUCTURAL ELEMENTS |
258 | FIGURE 3.3 FLOOR/CEILING ASSEMBLIESâWOOD JOIST TABLE 3.3 FLOOR/CEILING ASSEMBLIESâWOOD JOIST |
259 | TABLE 3.3âcontinued FLOOR/CEILING ASSEMBLIESâWOOD JOIST |
260 | TABLE 3.3âcontinued FLOOR/CEILING ASSEMBLIESâWOOD JOIST |
261 | TABLE 3.3âcontinued FLOOR/CEILING ASSEMBLIESâWOOD JOIST |
262 | FIGURE 3.4 FLOOR/CEILING ASSEMBLIESâHOLLOW CLAY TILE WITH REINFORCED CONCRETE TABLE 3.4 FLOOR/CEILING ASSEMBLIESâHOLLOW CLAY TILE WITH REINFORCED CONCRETE |
263 | TABLE 3.4âcontinued FLOOR/CEILING ASSEMBLIESâHOLLOW CLAY TILE WITH REINFORCED CONCRETE |
264 | TABLE 3.4âcontinued FLOOR/CEILING ASSEMBLIES-HOLLOW CLAY TILE WITH REINFORCED CONCRETE |
265 | SECTION IV BEAMS TABLE 4.1.1 REINFORCED CONCRETE BEAMS DEPTH 10″ TO LESS THAN 12″ |
266 | TABLE 4.1.1âcontinued REINFORCED CONCRETE BEAMS DEPTH 10″ TO LESS THAN 12″ |
267 | TABLE 4.1.1âcontinued REINFORCED CONCRETE BEAMS DEPTH 10″ TO LESS THAN 12″ |
268 | TABLE 4.1.2 REINFORCED CONCRETE BEAMS DEPTH 12″ TO LESS THAN 14″ |
269 | TABLE 4.1.2âcontinued REINFORCED CONCRETE BEAMS DEPTH 12″ TO LESS THAN 14″ |
270 | TABLE 4.1.3 REINFORCED CONCRETE BEAMS DEPTH 14″ TO LESS THAN 16″ |
271 | TABLE 4.2.1 REINFORCED CONCRETE BEAMSâUNPROTECTED DEPTH 10″ TO LESS THAN 12″ TABLE 4.2.2 STEEL BEAMSâCONCRETE PROTECTION DEPTH 10″ TO LESS THAN 12″ |
272 | SECTION V DOORS FIGURE 5.1 RESISTANCE OF DOORS TO FIRE EXPOSURE TABLE 5.1 RESISTANCE OF DOORS TO FIRE EXPOSURE |
273 | TABLE 5.1âcontinued RESISTANCE OF DOORS TO FIRE EXPOSURE |
274 | TABLE 5.1âcontinued RESISTANCE OF DOORS TO FIRE EXPOSURE |
275 | BIBLIOGRAPHY |
282 | INDEX |
288 | ICC EVALUATION SERVICE |
289 | S.K. GHOSH ASSOCIATES LLC |
290 | ICC PLAN REVIEW |
291 | HELPFUL TOOLS FOR YOUR EXISTING BUILDING CODE |